Karštų Liečių pirkti naudotą (998)

Gamybos metai: 2018, būklė: beveik kaip naujas (parodų įrenginys),

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, tuščias svoris: 115 kg, įėjimo įtampa: 230 V, garantijos trukmė: 24 mėnesiai, temperatūra: 95 °C, Techniniai duomenys: Būklė: NAUJAS Fedpfxjxykwwj Ahrspi Katalogo numeris: 1.030-510.0 Įtampa (Ph/V/Hz): 1 / 230 / 50 Nominali galia (kW): 0,3 Įtekančio vandens temperatūra (maks.): 50°C Minimali įtekėjimo apimtis: 400 l/val. Vandens tiekimo kiekis (l/val.): 400-1300 Maksimalus darbinis slėgis (apsaugos vožtuvas): 220 bar Karšto vandens darbinė temperatūra (maks.): 95°C Degiklio galia: 64kW Maksimalios kuro sąnaudos: 5,9 kg/val. Kuro bakas: 20L Kuras: šildymo alyva EL arba dyzelinas Darbinis svoris: 115kg Ilgis x plotis x aukštis (mm): 880x680x860 Komplektacija: Rankinė purškimo pistoleto Classic – M22 sriegis Purškimo vamzdis: 1050 mm Žarna: 10 m – DN8 – 250 bar – 100°C – M22/M22 Žarna (aukšto slėgio plovykla–karšto vandens generatorius jungtis) – 3 m – DN8 – 315 bar – 60°C Ilgaamžis įrenginys: – Tvirta rėmo konstrukcija užtikrina apsaugą esant nuolatiniam ir intensyviam naudojimui. – Visos priežiūros ir reguliariai prižiūrimos dalys lengvai pasiekiamos. – Integruotas kuro filtras ir galimybė išimti kuro baką valymui.

Būklė: naudotas, Gamybos metai: 1996, Uniconfort firmos karšto vandens generatorius, 540 000 kcal/val. Fpsdpfx Ahoy Ud Sterei Kcal/val.: 540 000

Būklė: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Warm Air Furnace MARTINA 120 The MARTINA warm air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft businesses. They have been developed for heating larger areas, such as workshops and production halls in both craft and industrial operations. These warm air systems require no lengthy preheating times and are capable of warming up joinery or carpentry workshops and other production facilities in a very short period. The furnace can be fueled with solid wood and its by-products, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37/EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guideline of Directive 89/392/EEC. All warm air furnaces in the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) fulfill both stages of the emission limits required by the 1st Federal Immission Control Ordinance (BImSchV). - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air performance: 9,000 m³/h - Combustion chamber depth: 950 mm - Loading door: 460 x 440 mm - Warm air blower: 1.05 kW / 230 V - Combustion chamber negative pressure: 0.2–0.3 mbar - Flue draught at nominal load: 0.18 mbar - Heatable room volume: approx. 2,500 m³ - Heatable area: approx. 500 m² - Required space: Width 800 mm, Depth 1170 mm, Height 2300 mm - Weight: 650 kg - Flue pipe diameter (connector): 200 mm - Chimney diameter (recommendation): 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Exhaust gas temperature: 287°C Fpodpfjvz Hhxjx Ahrsi - Warm air outlet nozzles: 2 x Ø 220 mm - For further data, please refer to the enclosed data sheet The two pipe connectors for outgoing warm air are located at the rear bottom side of the furnace. A maximum pipe length of 20 meters per nozzle is permitted for air distribution.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They have been developed for heating larger utility spaces such as workshops and workspaces in craft and industrial enterprises. These hot air systems require no extended heat-up phases and can quickly warm up joinery, carpentry, or other production facilities. Solid wood and its by-products—e.g., solid wood board offcuts, chips, sawdust, pellets, or briquettes—serve as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety provisions of Directive 89/392 CE. All hot air furnaces of the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of required emission values according to the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 85 kW - Thermal output (kcal): 73,000 - Fuel consumption: 19 kg/h - Air flow rate: 6,400 m³/h - Firebox depth: 840 mm - Loading door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Flue draught at rated load: 0.18 mbar - Heatable room volume: approx. 1,600 m³ - Heat coverage area: approx. 300 m² - Space requirement: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue connection diameter: 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft pressure: 16 Pa - Flue gas temperature: 291°C Fodpfxovz Hq Tj Ahrspi - Hot air outlet port: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connections for the air outlet are located at the lower rear section of the furnace. A maximum of 20 meters of ducting per pipe connection is allowed for air distribution.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 1300 x 1700 x 2550 mm Weight: 1200 kg Total connected load: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces offer an ideal solution for energy utilization in wood-processing industrial and craft businesses. They are designed for heating large usable spaces such as workshops and production areas in craft or industrial enterprises. These hot air systems do not require long heating-up phases and are capable of rapidly warming up joinery and carpentry workshops or other production facilities. The units can burn solid wood and its byproducts, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/EC, Italian Presidential Decree No. 459 of 24 July 1996, and safety guideline 89/392/EEC. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 233 kW - Thermal output (kcal): 199,000 - Fuel consumption: 50 kg/h - Airflow rate: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air fan: 1.96 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Nominal output draft requirement: 0.18 mbar Fpsdpfx Ahovz Hqgerji - Heatable volume: approx. 4,500 m³ - Heatable area: approx. 900 m² - Space required: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm - Recommended chimney diameter: 300 mm - Efficiency: 85–90 % - Chimney fan pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet connections: 2 x Ø 450 mm - Further data available in the attached data sheet The two duct connections for outgoing hot air are located on the lower rear side of the unit. A maximum of 20 meters of duct per outlet is allowed for air distribution.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Hot Air Furnace MARTINA 30 The MARTINA hot air furnaces offer an ideal solution for energy recovery in woodworking industrial and craft businesses. They are designed to heat larger usable spaces such as production halls and work areas in trade and industrial facilities. These hot air systems require no lengthy heat-up phases and can quickly warm up carpentry or joinery workshops as well as other manufacturing sites. Fuel types include solid wood and its by-products, such as remnants of solid wood boards, chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety directive of Equipment 89/392/CE. All MARTINA series hot air furnaces (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both emission threshold stages required by the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic operation and continuous air mode - Thermal output: 29.8 kW Fjdpovz Hqmjfx Ahrepi - Thermal output (Kcal): 25,700 - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Loading door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox underpressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable volume: approx. 600 m³ - Heatable surface area: approx. 120 m² - Footprint: Width 600 mm, Depth 800 mm, Height 1900 mm - Weight: 230 kg - Flue outlet diameter (collar): 160 mm - Chimney diameter (reference value): 200 mm - Efficiency: 85–90% - Chimney draft: 11 Pa - Exhaust gas temperature: 286 °C - Hot air outlet connections: 2 x Ø 200 mm - For further technical data, please refer to the attached data sheet The two pipe collars for the outgoing hot air are located on the rear side of the furnace in the lower section. A maximum pipe length of 20 metres is permitted per collar for air distribution.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Hot Air Furnace MARTINA 30-15 The MARTINA hot air furnaces are an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed for heating larger functional areas, such as workshops and workspaces in craft and industrial facilities. These hot air systems require no long heat-up phases and warm up the workshop or production hall—such as those in carpentry, joinery, or other manufacturing environments—in a very short time. Suitable fuels include solid wood and its by-products, e.g. solid wood board offcuts, shavings, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated 24 July 1996, and the safety directive of installation 89/392 CE. All MARTINA series hot air furnaces (models 15, 30, 55, 85, 120, 180, 240, 350) meet both emission stages required by the 1st BImSchV (Federal Emission Control Ordinance). - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 Kcal - Fuel consumption: 4.5 kg/h - Air flow rate: 2,400 m³/h - Combustion chamber depth: 580 mm - Loading door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V Fsdpevz Hqtofx Ahropi - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 300 m³ - Heatable area: approx. 60 m² - Space requirement: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connector): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286°C - Hot air outlet connectors: 2 x Ø 200 mm - For further specifications, please refer to the attached data sheet The two duct connectors for warm air outlet are located at the lower rear side of the unit. A maximum pipe length of 20 meters per connector is permitted for air distribution.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces are an ideal solution for energy utilization in wood-processing industrial and craft businesses. They have been developed for heating large utility areas, such as workshops and working spaces of trade and industrial enterprises. These hot air systems require no long heat-up phases and heat up woodworking shops, carpentries, and other production areas within a very short time. The furnaces can use solid wood and its by-products as fuel, e.g. solid wood panel residues, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated July 24, 1996, and safety guideline Directive 89/392 CE. All hot air furnaces of the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of emission limits stipulated by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 390 kW - Thermal output (Kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Firebox negative pressure: 0.2–0.3 mbar - Flue draft requirement at nominal output: 0.18 mbar - Heatable room volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Space requirement: width 1700 mm, depth 2000 mm, height 2550 mm Fodpfjvz Hqyex Ahrjpi - Weight: 1400 kg - Flue pipe diameter (connection): 300 mm - Chimney diameter (reference value): 350 mm - Efficiency: 85–90% - Chimney draft: 11.5 Pa - Flue gas temperature: 289°C - Hot air discharge nozzles: 2 x Ø 450 mm - For additional data, please refer to the data sheet. The two pipe fittings for outgoing hot air are located at the rear of the furnace near the bottom. For each pipe fitting, a maximum pipe length of 20 meters is allowed for air distribution. Longer lengths are optionally available upon arrangement with the manufacturer. Please contact us for more details.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 720 x 1000 x 1900 mm Weight: 300 kg Total Power Requirement: 1.2 kW Fjdpevz Hq Hefx Ahrepi Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces are an ideal solution for energy recovery in wood-processing industrial and craft businesses. They are designed to heat large areas, such as workshops and working spaces in trade and industrial operations. These hot air systems require no lengthy warm-up phases and can heat up workshop halls of joineries or carpentries, as well as other production facilities, in a very short time. Solid wood and its by-products (e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes) serve as fuel materials. The MARTINA hot air furnaces comply with EU Directive 98/37CE and Italian Presidential Decree No. 459 dated July 24, 1996, as well as the safety directive of 89/392 CE. All MARTINA series hot air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both emission stages according to the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output Kcal: 43,000 - Fuel consumption: 15 kg/h - Air output: 4,900 m3/h - Combustion chamber depth: 650 mm - Loading door: 370 x 350 mm - Hot air blower: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable volume: approx. 1,000 m3 - Heatable area: approx. 220 m2 - Space requirement: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (collar): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney discharge pressure: 13 PA - Flue gas temperature: 290°C - Hot air outlet spigots: 2 x Ø 200 mm - For additional technical data, please refer to the attached data sheet The two pipes for outgoing hot air are located at the lower part of the rear side of the furnace. A maximum of 20 meters of ducting per spigot is permitted for air distribution.

Gamybos metai: 2026, būklė: beveik kaip naujas (parodų įrenginys), Parts Cleaning Machine / Spray Cleaning System Type L102 Automatic hot water parts washer with basket drive via geared motor, equipped with 2 stainless steel wash pumps (make: Lowara) and 2 rotating 3-sided spray systems. Full system insulation included. - Basket diameter: 910 mm - Usable height: 520 mm - Max. load weight: 250 kg - Spray pressure: 2x 3 bar - Tank capacity: 175 litres - Heating: electrically adjustable (ambient temp. up to 90°C) System dimensions (LxWxH): 1,300 x 1,250 x 1,990 mm Net weight: approx. 300 kg Wash timer freely adjustable (minutes and hours) Entire cleaning machine (internal components and external cladding) made of stainless steel 1.4301 Water circulation system and loading basket made of stainless steel 1.4301 Full system insulation (tank and cabin) made of stainless steel 1.4301 Mechanical lid lock Bath cover with fine filter (2,000 micron) 2 suction filters for pump protection Fedpjdz Dy Hofx Ahrjpi Operating hours counter Steam extraction including condensate return Parts cleaning system in as-new condition (test/technical centre system) OTHER BASKET DIMENSIONS AVAILABLE ON REQUEST!!! This offer is subject to change and non-binding. Modifications, errors, and prior sale expressly reserved.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Parts Cleaning Machine / Spray Cleaning System Type L102 Automatically operating hot water parts washing machine with basket drive via geared motor, 2 stainless steel washing pumps (make: Lowara), 2 rotary 3-sided spray systems. Full system insulation included. - Basket diameter: 910 mm - Usable height: 520 mm - Maximum loading weight: 250 kg - Spray pressure: 2x 3 bar - Tank volume: 175 liters - Heating: electrically adjustable (RT - 90°C) System dimensions (LxWxH): 1,300 x 1,250 x 1,990h mm Empty weight: approx. 300 kg Washing timer freely adjustable (minutes and hours) Complete cleaning machine (interior and exterior cladding) made of stainless steel 1.4301 Water circuit and loading basket made of stainless steel 1.4301 Insulation of the entire system (tank and cabin) made of stainless steel 1.4301 Fpjdohl H Uuepfx Ahroi Mechanical lid lock Bath cover with fine filter (2,000 micron) 2 suction filters as pump protection Operating hours counter Steam extraction incl. condensate return Parts washing unit is as new (test unit / pilot plant) This offer is subject to change and non-binding. Changes, errors, and prior sale expressly reserved.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2018, Dynajet 500th aukšto slėgio plovimo įrenginys Pagaminimo metai: 2018 Maksimalus temperatūros diapazonas: 95°C Markė: Dynajet Mobilus: taip Fpodsyigr Uepfx Ahroi Serijos numeris: 62005720 Tipas: 500th Maksimalus darbinis slėgis: 500 bar Su nuotoliniu valdymu; 1000 l vandens bakas; tuščias svoris 1420 kg; apie 30 m aukšto slėgio žarna; apie 25 m pripildymo žarna; 597 darbo valandos; Patikrintas ir veikiantis

Būklė: naujas, EVA Hot Melt Adhesive Without Filler 280.30/31 Application examples: Edge banding For bonding thermoplastic edge bands (such as ABS, PP, PVC), resin-impregnated decor paper, veneer edge bands (with/without fleece backing) and solid wood edges. In principle, the bonding properties and the substrates’ surfaces to be bonded (including reverse side priming or other surface pre-treatments) must be checked for application suitability prior to use. Processing instructions: Fpsdpjx Sqnvofx Ahroi Automatic conveying systems can be used for processing the adhesive granulate. The surrounding temperature should not exceed 30°C. Different hot melt types may, depending on formulation, be incompatible with each other. Therefore, we recommend thoroughly cleaning the application equipment when changing products. For further information, please contact us. Processing characteristics may vary depending on the application technology used and if the feed speed deviates; this can affect the bonding process. Customer trials are necessary! Typical Properties: Application temperature [°C]: 180 – 200 Feed speed [m/min]: 10 – 40 Appearance: final digit 0 = opaque yellow, final digit 1 = white Density at 20°C [g/cm³]: approx. 1.03 ± 0.03 Softening range [°C]: approx. 90 ± 5 (Kofler heating bench) Viscosity at 190°C [mPas]: approx. 66,000 ± 10,000 Heat resistance [°C]: approx. 80 ± 5 Open time at 190°C [s]*: approx. 6 ± 2 Setting time: not applicable * measured on a 200 μm film Values determined according to Jowat test methods

Būklė: geras (naudotas), Kodas: 0377 Prekės ženklas: COLOMBO R Modelis: PCA.S Automatinė nepertraukiamo ciklo karšto presavimo linija, skirta panelių, baldų, durų, apdailos plokščių, sumuštinių plokščių ir įvairių gaminių gamybai. Tvirta atraminė konstrukcija Komplektacija: 4-ių volelių klijavimo mašina OMMA – plotis 1400 mm Diskinis perdavimo konvejeris Paruošimo stalas Presas COLOMBO 5500 x 1400 mm – 8 stūmokliai – 150 mm skersmuo Masės plieno plokštė Presavimas iš viršaus į apačią Fpsdoy I Sncepfx Ahrei Slėgis 4 kg/cm² Automatinis iškrovimas su fotoelementiniais įrenginiais Darbinio paviršiaus aukštis 800 mm Uždarymo laikas sumažintas iki 1–2 sek., atidarymo – iki 2–3 sek. Bendri presavimo matmenys (mm): 5960 x 1900 x 2320 h Visos linijos ilgis 22 m Linijos įrengimui nereikalingas joks pagrindas

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1974, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1276, CNC Warm-Radialschmiedemaschine GFM SX-13 Baujahr: 1974 / (Modernisierung 2022) Neue Steuerung: PLC SIEMENS S7 Maschinennummer: 1276 Anzahl der Hämmer: 4 Schmiedekraft je Hammer: 160 Tonnen Hammerschläge / min: 700/min Hammerlänge: 240 mm Einstellbereich Durchmesser: 80 mm Maximaler Schmiededurchmesser: Baustahl, Rundquerschnitt: Ø 130 mm Quadratquerschnitt: Ø 115 mm Kleinster schmiedbarer Durchmesser: Ø 25 mm Manipulator A max. Verfahrweg: 6.820 mm Manipulator B max. Verfahrweg: 7.150 mm Maximale Werkstücklänge: 6.000 mm Schnellgeschwindigkeit Manipulator: 400 mm/sec Gesamtanschlusswert: 300 kW, 380 V, 50 Hz Maschinenabmessungen: Schmiedehöhe über Boden: 615 mm Fodpfjq U R T Nox Ahropi Gesamthöhe der Maschine über Boden: 1.665 mm Gesamtlänge der Maschine: 32.670 mm Gesamtlänge des Fundaments: 33.400 mm Gesamtbreite der Maschine (ohne Zusatzausrüstung): ca. 3.885 mm Gesamtbreite des Fundaments: 16.000 mm Gesamtgewicht der Maschine: 84.000 kg

Gamybos metai: 1974, būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1293, CNC-Radialschmiedemaschine GFM Modell SX-16 Hersteller: GFM (Österreich) Baujahr: 1974 / 2022 Modell: SXL-16 Maschinennummer: 1293 SPS: Siemens S7 – Technology V4.2 mit CNC Bosch Rexroth XM Anzahl der Schmiedehämmer: 4 Schmiedekraft: 800 t (200 t je Hammer) Schläge pro Minute: 580 Hammerlänge: 320 mm Maximaler Hammer-Einstellbereich (nach Durchmesser berechnet): 100 mm Maximaler Schmiededurchmesser für: - Baustahl: Rundquerschnitt – Ø 160 mm Vierkantquerschnitt – 130 mm - Hochlegierter Stahl: Rundquerschnitt – Ø 120 mm Vierkantquerschnitt – 100 mm Extremmaß Vierkant: 12 x 120 mm Maximale Schmiedelänge: 6000 mm Minimaler und maximaler Spannbereich im Manipulator: 30 – 160 mm Verfahrweg Manipulator A: 6800 mm Verfahrweg Manipulator B: 7200 mm Durchlassdurchmesser des Manipulators: Ø 130 mm Schnellhubgeschwindigkeit der Manipulatoren: 400 mm/s Vorschubgeschwindigkeit der Manipulatoren (stufenlos): 10 – 115 mm/s Kühlwasserdruck: 3 – 5 bar Einlasstemperatur Kühlwasser: max. 30°C Kühlwasserverbrauch: 34 m³/h Rohrdurchmesser Kühlwasser: 2” Druckluftdruck: min. 5 bar Rohrdurchmesser Druckluft: Ø20 mm Druckluftverbrauch: 1,5 Nm³/h Stromversorgung (Nennleistung): 350 kW Motorspannung: 500 V Fpedpfx Asq U Sa Sehrei Steuerspannung: 220 V Leistung Hauptantrieb: 200 kW Leistung Pumpenantriebe: 185 kW Leistung Manipulator-Antriebe: 2 x 22 kW Abmessungen der Maschine Achshöhe Schmiedegut über Hallenboden: 750 mm Maximale Maschinenhöhe über Hallenboden: 2.050 mm Maximale Maschinenlänge auf Hallenboden: 33.740 mm Fundamentlänge: 34.200 mm Maximale Maschinenbreite auf Hallenboden (ohne Beschickung): 4.350 mm Fundamentbreite: 15.600 mm Nettogewicht der Maschine: 124.490 kg

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, tuščias svoris: 105 kg, įėjimo įtampa: 230 V, garantijos trukmė: 24 mėnesiai, temperatūra: 95 °C, Techniniai duomenys: Būklė: NAUJAS Katalogo numeris: 1.030-500.0 Maitinimo tipas (Ph/V/Hz): 1 / 230 / 50 Galia (kW): 0,3 Įėjimo temperatūra (maks.): 50°C Mažiausias įėjimo srautas: 400 l/h Vandens tiekimo kiekis (l/h): 400-1000 Didžiausias darbinis slėgis apsauginis vožtuvas: 200 bar Didžiausia karšto vandens darbinė temperatūra: 95 °C Degiklio galia: 43 kW Maksimalios degalų sąnaudos: 3,5 kg/h Degalų bakas: 20 l Kuras: EL šildymo alyva arba dyzelinas Darbinis svoris: 105 kg Ilgis x Plotis x Aukštis (mm): 880 x 680 x 860 Fpodpfx Ahoxtc Rcorei Komplektacija: Rankinė purškimo pistoletas Classic – M22 sriegis Purkštuko vamzdis: 1050 mm Žarna: 10 m – DN8 – 250 bar – 100°C – M22/M22 Žarna (aukšto slėgio plovimo įrenginio ir karšto vandens generatoriaus sujungimui) – 3 m – DN8 – 315 bar – 60°C Ilgaamžis įrenginys: - Tvirta rėmo konstrukcija užtikrina apsaugą intensyvaus ir nuolatinio naudojimo metu. - Visi reguliariai prižiūrimi ar aptarnaujami mazgai lengvai pasiekiami. - Integruotas kuro filtras ir galima pašalinti kuro baką valymui.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, bendras svoris: 500 kg, Taip pat žr. pagrindinį puslapį: bdtronic.com/de-de/heissnietanlagen/vollautomatisch-heissnieten/ Be to, yra ir daugiau panašių įrenginių. Fsdpfxoy Nzhbe Ahrjpi Šiuo metu fiziškai randasi dukterinėje gamykloje.

Būklė: geras (naudotas), Heating or cooling plate Fedpfxolnfhzo Ahrepi Dimensions: 1,600 x 600 x 50 mm Channels: 6 Table / frame: 1,600 x 600 x 820 mm Application: Suitable for filling with hot or cold water

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, Mold Masters external 3-zone hot runner TMXL-3/3-0 – we have 7 units available. Fpsdpfx Aevax Izehrji

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, table length: 3000 mm table width: 1300 mm table opening: 400 mm cylinders: 6, diameter 70 mm Fsdpfx Ahji E Tz Hjrspi pressing force: 90 tons power: 21 kW heating: by diathermic oil

Būklė: geras (naudotas), mašinos/transporto priemonės numeris: 169693, Heidelberg Platen Press TP, machine number T169693 and Heidelberg Platen Press TP, T191298. The machines are in good condition and available immediately. Fedjvvikfjpfx Ahropi If you are interested, we are happy to provide information about additional machines in our inventory. You are welcome to inspect the machines at our premises by prior appointment.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, veikimo valandos: 1 h, - High-pressure cleaner PTC TORPEDO MINI-E 3.8 M 230/50 Powersteam and TORPEDO MINI-E 5.8 T 400/50 Powersteam, similar but not Dynajet, Oertzen, Falch, ... - Cold water / hot water / steam 32 bar up to 140°C / high-pressure steam 150 or 200 bar up to 150°C for cleaning and disinfection The following models are available: - TORPEDO MINI-E 3.8 M 230Volt/50Hz Powersteam 8 l/min at 150 bar Fpjdjfh Skaepfx Ahrji - TORPEDO MINI-E 5.8 T 400Volt/50Hz Powersteam 8 l/min at 200 bar - Dimensions and unladen weight: 110x64x98 cm, approx. 150 kg - Incl. 10 m high-pressure hose, spray gun, lance, and 25° flat jet nozzle

Gamybos metai: 2022, būklė: paruoštas naudoti (naudotas), Parduodama pilna išpilstymo linija su 12 pozicijų gravitinio ir slėginio užpildymo užpildu, turinčiu integruotą Twist-Off dangtelių užsukimo įrenginį, skirtą maisto pramonei. Užpildymo vietų: 12, konstrukcija: rotacinė karuselė, skysčio klampumas: žema–vidutinė, našumas: apie 2000 butelių/val., užsukimo našumas: apie 1000–1200/vnt. per valandą, talpa: termiškai izoliuota, talpos tūriai: 35 l/50 l. Tai pilna užpildymo linija su konvejeriais, surinkimo stalu, jutikliais, besisukančiais stalais, siurbliais ir formato dalimis. Įranga buvo išjungta 2024 m. Yra dokumentacija. Galima apžiūra vietoje. Fpedpfx Ahsy Ax Ufersi