Junginys Pjovimo Pjūklas pirkti naudotą (11 063)

Būklė: naujas, Model designation Shark 281 SXI evo Cpodpfjgvkglex Aahow

Būklė: naujas, Model designation Cpsdpfx Aogvkchoahjw Shark 281 CCS

Būklė: naujas, Model designation Cjdpfxel Sva Is Aahjpw SHARK 331-1 NC 5.0 SPIDER

Būklė: naujas, modelio pavadinimas Cedpfx Aogvkafeahepw Shark 332-1 SXI evo

Būklė: naujas, Model designation Shark 332-1 CCS Codpfx Aaogvquwshjpw

Būklė: naujas, Model designation Cjdsgvkctjpfx Aahepw Shark 282 SXI evo

Gamybos metai: 2004, būklė: dilaminuotas dirbtuvėje (naudotas), Walter double saw with TRKS 200 feeder Codpfx Aeh R Tvtoahspw cutting height of the double saw: 200 mm, motor power: 40 kW, chain feeder with controllers and adjustable prism for different diameters. Gearbox for feed rate adjustment.

Būklė: labai geros būklės (naudotas), Optimising cross-cut saw GreCon type 2004 with infeed cross conveyor with outfeed conveyor belt featuring 4 ejectors with chain bed Technical specifications: Max. workpiece width: 250 mm Max. workpiece thickness: 80 mm Saw blade diameter: 450 mm Cutting speed: 90 m/sec Saw motor: 5.5 kW Cpjdpfxjn Hwl Ao Aahjw Saw shaft control: pneumatic Chain drive: servo motor Min. working width: 40 mm Min. infeed length: 500 mm Net weight: approx. 1,800 kg Was completely overhauled and not used afterwards Location: Austria, near Ried im Innkreis

Būklė: labai geros būklės (naudotas), Gamybos metai: 1990, Funkcionalumas: visiškai funkcionalus, ritininio padavėjo ilgis – 6050 mm juostinio išleidimo įtaiso ilgis – 6100 mm pjūklo disko skersmuo – 500 mm modelis: R500 Cpjdpfx Ajx Nnbzjahew pakrovimas su varomais ritininiais konvejeriais maitinimas: 380 V

Būklė: naudotas, OMGA T421 IDC000097 Codpfx Aaou Dhupshjpw - disko pjūklas: 400 mm - komplektuojama su dulkių filtru pjūklo dulkėms

Būklė: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 0 x 0 x 0 mm Weight: 1500 kg Total power requirement: 10.2 kW Fully optimizing automatic cross-cut saw TR-600 MATRIX-6000 - Motor drive power: 9.2 kW - Saw blade diameter: 600 x 30 mm, Z=60 - Cutting capacity according to cutting diagram - Cutting capacity: 150 x 365 mm - Cutting capacity: 130 x 440 mm - Cutting capacity: 100 x 530 mm - Cutting capacity: 60 x 580 mm - Cutting capacity: 30 x 610 mm - Cutting cycle: 6 seconds - Hydraulic cross-cutting unit - Worktable inclined by 8° - Minimum workpiece thickness: 10 mm - Safety cover over cross-cutting unit - CE standard - Weight: 1500 kg Cpodpsv A Htksfx Aahow Electrical connection data: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction ports: 4 x 100 mm diameter - Extraction capacity: 2400 m³/h - Air velocity at the center of the extraction port: approx. 25–35 m/s Electronically controlled pusher: - Feed length: 6000 mm - Max. pusher speed: 90 m/min - Driven by brushless servo motor - Feed system with precision rack and pinion and feedback via servo motor - Pneumatic lifting of the pusher at cycle end and upper return - Photocell for workpiece length measurement - Photocell for defect detection - Marking with fluorescent chalk - Working surface inclination 8° - Positioning tolerance: +/- 0.4 mm Control system: - High-resolution 12" touchscreen monitor (800 x 600 pixels) - Creation of cut lists directly at the machine control - Up to 1000 cut lists with 10 dimensions each - One list with up to 10,000 dimensions in sequence - 3 optimization options (maximum length, sequence, and workpiece sequence) - 3 optimization options (volume, minimal waste, and priority) - Standard USB and Ethernet port - Includes OPTI function for automatic measurement of the workpiece to be cut. Optimal for processing material of variable lengths, with single or bundle infeed - 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimal waste, and priority) - Includes OPTI PLUS function for reading markings to ensure full optimization and removal of knots and defects. - Marking with chalk Options: - Pneumatic side clamp €850.00 - Creation of cut lists at PC €360.00 - Outfeed table €360.00/m

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 0x0x0 mm Weight: 1000 kg Total power requirement: 8.5 kW Fully optimized automatic cross-cut saw TR-500 MATRIX-6000 - Motor drive power: 7.5 kW - Saw blade diameter: 500 x 30 mm Z=144 - Cutting capacity according to cutting diagram - Cutting capacity 135 x 280 mm - Cutting capacity 125 x 295 mm - Cutting capacity 95 x 325 mm - Cutting capacity 80 x 340 mm - Cutting capacity 55 x 360 mm - Cutting cycle: 4 seconds - Pneumatic cross-cutting unit - 8° inclined worktable - Minimum workpiece thickness: 10 mm - Safety cover over cross-cutting unit - CE standard - Weight: 1000 kg Connection data: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction ports: 4 x diameter 100 mm - Extraction capacity: 2400 m³/h - Air consumption per cycle: 4 Nl - Air velocity at center of extraction port: approx. 25–35 m/s Electronically controlled pusher: - Feed length: 6000 mm - Pusher speed: 90 m/min. - Drive by brushless servomotor - Feed system with precision rack and pinion, measurement by servomotor - Pneumatic pusher lift at end of cycle and upper return - Photoelectric sensor for workpiece length measurement - Photoelectric sensor for defect detection - Marking with fluorescent chalk - 8° inclined working surface - Positioning tolerance: +/- 0.4 mm Control system: - High-resolution 12" touchscreen monitor (800 x 600 pixels) - Cutting list creation directly via machine control - Up to 1000 cutting lists with 10 sizes each - Single list with 10,000 dimensions in sequence - 3 optimization options (maximum length, sequence, workpiece sequence) - 3 optimization options (volume, minimal waste, priority) - Standard USB and Ethernet ports - Including OPTI function for automatic measuring of the workpiece to be cut. Optimal solution for processing material with variable lengths, for single or bundle feeding - 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimal waste, priority) - Including OPTI PLUS function for mark detection, enabling full optimization and removal of knots and defects - Marking with chalk Option: - Pneumatic side clamp €850.00 Cpjdpfx Aaov A Htdehew - Cutting list creation via PC €360.00 - Outfeed table €360.00/m

Būklė: naujas, Gamybos metai: 2025, Dimensions (LxWxH): 0x0x0 mm Weight: 900 kg Total power requirement: 5 kW Cjdpfx Aov A Hr Tsahjpw Automatic optimizing cross-cut saw with full optimization TR-450 MATRIX-6000 - Drive motor power: 4.0 kW - Saw blade diameter: 450 x 30 mm Z=72 - Cutting capacity according to cutting diagram - Cutting capacity: 95 x 265 mm - Cutting capacity: 85 x 277 mm - Cutting capacity: 60 x 290 mm - Cutting capacity: 40 x 310 mm - Cutting capacity: 25 x 330 mm - Cutting cycle time: 4 seconds - Pneumatic cross-cutting unit - Worktable inclined by 8° - Minimum workpiece thickness: 10 mm - Safety cover over cross-cutting unit - CE standard - Weight: 900 kg Connection data: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction ports: 2 x 100 mm diameter - Extraction performance: 2400 m³/h - Air consumption per cycle: 6 Nl - Air speed at center of extraction port: approx. 25-35 m/s Electronically controlled pusher: - Feed length: 6000 mm - Pusher speed: 90 m/min - Drive via brushless servo motor - Feed system with precision rack-and-pinion and measurement via servo motor - Pneumatic lift of the pusher at cycle end and overhead return - Photoelectric sensor for workpiece length measurement - Photoelectric sensor for defect detection - Marking with fluorescent chalk - Worktable inclination 8° - Positioning tolerance +/- 0.4 mm Control: - High-resolution 12'' touchscreen monitor (800 x 600 pixels) - Creation of cutting lists directly on the machine control - Up to 1000 cutting lists with 10 sizes each - Single list with 10,000 sequential sizes - 3 optimization options: maximum length, sequence, and workpiece sequence - 3 optimization options: volume, minimum waste, and priority - Standard USB and Ethernet interface - Including OPTI function for automatic measurement of the workpiece to be cut. Optimal for processing material with variable lengths, with single or batch feeding. 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimum waste, and priority) - Including OPTI PLUS function for reading chalk markings, enabling full optimization and removal of knots and defects. - Marking with chalk Options: - Pneumatic side clamp €850.00 - Creation of cutting lists on PC €360.00 - Outfeed table €360.00/m

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 4500x1200x1200 mm Weight: 1500 kg Total Power Requirement: 8 kW Optimizing Cross-Cut Saw WS1 - Cutting Height Pos. A: 130x175, 120x200, 100x230, 85x250, 50x280, 15x305 mm Pos. B: 100x290, 80x315, 50x340, 30x355, 15x365 mm - Cutting speed up to 100 cycles/min. - Feed speed: 120 m/min - Motor power: 7.5 kW - Voltage: 400 V / 50 Hz - Saw blade diameter: 500 mm, bore 30 mm - Speed: 3600 rpm - Min. workpiece length: 550 mm - Min. workpiece width: 40 mm - Min. workpiece height: 15 mm - Cutting accuracy: +/- 0.8 mm - Infeed roller conveyor right, 2000 mm with double marking station - Discharge table left, 1000 mm Cjdpfx Aaovz Hz Eshjpw - Extraction port diameter: 200 mm - Air consumption: 20 NL/cycle - Operating pressure: 6 bar - Working height: 930 mm - PLC control with 7” color touch screen for simple operation + fixed length cross-cut mode + sequential cross-cut mode (10 different dimensions storable) + cross-cutting of marked chalk lines + fixed length and marked chalk line cross-cutting - CE conformity - Dimensions (L=4500, W=1200, H=1200 mm) - Weight: 1500 kg

Būklė: naujas, Gamybos metai: 2025, Matmenys (Ilgis/Plotis/Aukštis) 3000x1070x1200 mm Svoris 1150 kg Bendras galingumo poreikis 10 kW Optimizuojantis skersavimo pjūklas OPTIMAX 100 - Pjūklo variklis 7,5 kW - Sukimosi greitis 3200 aps./min. - Pavaros variklis 2,0 kW - Pavaros greitis bepakopis, iki maks. 80 m/min - Pjovimo dažnis iki 80 taktų/min. Cpjdpfjvz Hzxex Aahow - Pjūklo disko Ø 455 mm - Pjūklo disko skylė 30 mm - Pjovimo aukštis 100 mm (pagal pjovimo diagramą) - Didelis pjovimo tikslumas ± 1 mm - Minimali ruošinio ilgis 300 mm - Mažiausias atstumas tarp žymėjimų 20 mm - Mažiausias ruošinio dydis 300 x 30 x 10 mm - PLC valdymas su liečiamuoju ekranu patogiam naudojimui + fiksuoto ilgio pjovimo režimas + sekvencinio pjovimo režimas (galima išsaugoti 10 skirtingų matmenų) + pjovimas pažymėtų kreidos linijų pagalba + fiksuoto ilgio ir pažymėtų kreidos linijų pjovimas - Įbėgimo ritininis stalas dešinėje 1200 mm - Išbėgimo stalas kairėje 1000 mm - Suslėgto oro jungtis 8 bar - CE atitiktis - Matmenys L=3000, P=1070, A=1200 mm - Svoris 1150 kg

Gamybos metai: 2025, būklė: naujas, Dimensions (LxWxH): 8015 x 1635 x 2125 mm Weight: 2400 kg Total Power Requirement: 13.2 kW Longitudinal Saw GL-6000 - Maximum cutting length: 6200 mm - Maximum cutting width: 600 mm - Maximum cutting height: 160 mm - Saw blade diameter: 550 mm - Saw blade bore: 30 mm - Saw motor power: 11 kW - Feed gear motor with inverter: 1.1 kW - Width adjustment motor: 1.1 kW - Total power: 13.20 kW - Voltage: 400 V, 50 Hz - Saw blade feed speed, stepless: 0 - 80 m/min - Saw blade return speed: 80 m/min - Compressed air connection: 6 bar - Extraction ports: 2 x 130 mm, 1 x 200 mm - 7" touch screen - Rubberised foot pedal for start and feed control of the saw carriage - Ammeter for automatic reduction of cutting speed - Safety extraction beam with integrated lamella guard - Electric width adjustment with ball screw and 2 speeds - HM saw blade included: 550 x 30 x 4.5 mm Z 44 Cpodpevz E Nbsfx Aahew - 3 positions for saw blade height adjustment - Lowerable saw blade - ETHERNET connection for online service - Dimensions: L=8015, W=1635, H=2125 mm - Weight: 2400 kg

Būklė: geras (naudotas), maks. disko skersmuo: 400 mm veleno skersmuo: 30 mm diskas reguliuojamas aukštyn/žemyn maks. pjovimo aukštis: 130 mm Cpodpfx Aoxvmw Ssahjw min. pjovimo plotis: 250 mm maks. pjovimo plotis: 2350 mm elektrinis pjūklų padėties reguliavimas variklių galia: 2 x 4 kW stalo pastūmos variklio galia: 0,75 kW

Būklė: naudotas, Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 035-123781, Naudota Gama 63 K3 mašina veikianti. Visi duomenys pateikti nuotraukose ir PDF failuose. Cpedpfx Ajx Ev Ubjahsw

Būklė: naudotas, Holtec pakuočių skersavimo pjūklas - Hidraulinis pjūklo nuleidimas - Ilgio matavimas - Hidraulinis paketo iškėlimas Csdoxzr Efjpfx Aahspw

Gamybos metai: 2004, būklė: geras (naudotas), Crosscut and mitre saw, pull saw, chop saw, aluminium circular saw, metal circular saw, metal cut-off saw, under-table circular saw with double mitre, aluminium chop saw, under-table saw, aluminium circular saw, semi-automatic aluminium circular saw, chop saw, glazing bead saw - Manufacturer: Graule Type ZS135 - Motor power: 2 kW - Speed: 2700 rpm - Saw blade: Ø 350 mm, tiltable - Cutting capacity: 90° flat 430 x 135 mm Csdpfst Hafkjx Aahepw - Cutting capacity: 45° flat 300 x 135 mm - Transport dimensions: 1150/910/H1200 mm - Weight: 185 kg with pallet

Būklė: naujas, Gamybos metai: 2023, pjovimo aukštis (maks.): 200 mm, bendras svoris: 700 kg, pjovimo plotis (maks.): 660 mm, disko skersmuo: 600 mm,

Būklė: geras (naudotas), Mitre saw, right/left saw unit, double mitre saw, cross-cut and mitre saw, double-end profiler - Double mitre saw: right and left saw unit from Rapid DGL / BFA saw-drill-/milling automation - Motor: Himmel 3.0 kW / 2790 rpm Csdpfx Ajgzc Iyjahspw - Saw unit: swivels 45° - Saw blade: Ø 410 mm - Price/sale: complete - Overall dimensions: 1060/760/H680 mm - Total weight: 240 kg

Būklė: labai geros būklės (naudotas), Stone cutting saw with diamond blade Codpfxew Evzns Aahopw

Būklė: labai geros būklės (naudotas), Labai geros būklės. Cedpfx Aexcll Ujahspw

Būklė: naujas, Gamybos metai: 2026, Crosscut and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, but without saw blade Cjdsi Dfidopfx Aahopw The machine tilts via handwheel and worm gear (rear) Saw blade diameter: 520 mm, saw blade bore: 50 mm Saw blade speed: 2800 rpm 400 Volt / 5 kW (S6/40%) motor with brake and automatic star-delta switch Cutting width at 90°: 420 mm Cutting width at 45° (swiveled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm The saw can be swiveled to one side to approx. 25° for sharp angles, and tilted flat to the left up to 30° Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg - Immediately available -