Junginys Pjovimo Pjūklas pirkti naudotą (11 716)

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 3940 x 850 x 1350 mm Weight: 410 kg Total power requirement: 5.5 kW Undertable crosscut saw CUTMAX 450 - Cutting height: 125 x 125 mm - 100 x 250 mm - Table dimensions: 660 x 700 mm - Saw blade diameter: 450 mm - Motor: 5.5 kW / 400 V - Speed: 3,600 rpm - Cutting speed: up to 45 cycles/min - Compressed air connection: 8 bar - Extraction port: Ø 120 mm - Two-hand safety operation Ppjdpfx Acjvz Eytsaew - CE conformity - Includes 1.5 m roller track left and right - Dimensions: L = 940, W = 850, H = 1350 mm - Weight: 410 kg

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 4500x1200x1200 mm Weight: 1500 kg Total Power Requirement: 8 kW Optimizing Cross-Cut Saw WS1 - Cutting Height Pos. A: 130x175, 120x200, 100x230, 85x250, 50x280, 15x305 mm Pos. B: 100x290, 80x315, 50x340, 30x355, 15x365 mm - Cutting speed up to 100 cycles/min. - Feed speed: 120 m/min - Motor power: 7.5 kW - Voltage: 400 V / 50 Hz - Saw blade diameter: 500 mm, bore 30 mm - Speed: 3600 rpm - Min. workpiece length: 550 mm - Min. workpiece width: 40 mm - Min. workpiece height: 15 mm Podjvz Hz Eepfx Acaspw - Cutting accuracy: +/- 0.8 mm - Infeed roller conveyor right, 2000 mm with double marking station - Discharge table left, 1000 mm - Extraction port diameter: 200 mm - Air consumption: 20 NL/cycle - Operating pressure: 6 bar - Working height: 930 mm - PLC control with 7” color touch screen for simple operation + fixed length cross-cut mode + sequential cross-cut mode (10 different dimensions storable) + cross-cutting of marked chalk lines + fixed length and marked chalk line cross-cutting - CE conformity - Dimensions (L=4500, W=1200, H=1200 mm) - Weight: 1500 kg

Būklė: naujas, Gamybos metai: 2025, Dimensions (LxWxH): 0x0x0 mm Weight: 900 kg Total power requirement: 5 kW Automatic optimizing cross-cut saw with full optimization TR-450 MATRIX-6000 - Drive motor power: 4.0 kW - Saw blade diameter: 450 x 30 mm Z=72 - Cutting capacity according to cutting diagram - Cutting capacity: 95 x 265 mm - Cutting capacity: 85 x 277 mm - Cutting capacity: 60 x 290 mm - Cutting capacity: 40 x 310 mm - Cutting capacity: 25 x 330 mm - Cutting cycle time: 4 seconds - Pneumatic cross-cutting unit - Worktable inclined by 8° - Minimum workpiece thickness: 10 mm - Safety cover over cross-cutting unit - CE standard - Weight: 900 kg Connection data: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction ports: 2 x 100 mm diameter - Extraction performance: 2400 m³/h - Air consumption per cycle: 6 Nl - Air speed at center of extraction port: approx. 25-35 m/s Electronically controlled pusher: - Feed length: 6000 mm - Pusher speed: 90 m/min - Drive via brushless servo motor - Feed system with precision rack-and-pinion and measurement via servo motor - Pneumatic lift of the pusher at cycle end and overhead return - Photoelectric sensor for workpiece length measurement - Photoelectric sensor for defect detection - Marking with fluorescent chalk - Worktable inclination 8° - Positioning tolerance +/- 0.4 mm Control: Ppsdpfx Aev A Hr Tocaew - High-resolution 12'' touchscreen monitor (800 x 600 pixels) - Creation of cutting lists directly on the machine control - Up to 1000 cutting lists with 10 sizes each - Single list with 10,000 sequential sizes - 3 optimization options: maximum length, sequence, and workpiece sequence - 3 optimization options: volume, minimum waste, and priority - Standard USB and Ethernet interface - Including OPTI function for automatic measurement of the workpiece to be cut. Optimal for processing material with variable lengths, with single or batch feeding. 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimum waste, and priority) - Including OPTI PLUS function for reading chalk markings, enabling full optimization and removal of knots and defects. - Marking with chalk Options: - Pneumatic side clamp €850.00 - Creation of cutting lists on PC €360.00 - Outfeed table €360.00/m

Būklė: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 0 x 0 x 0 mm Weight: 1500 kg Total power requirement: 10.2 kW Fully optimizing automatic cross-cut saw TR-600 MATRIX-6000 - Motor drive power: 9.2 kW - Saw blade diameter: 600 x 30 mm, Z=60 - Cutting capacity according to cutting diagram - Cutting capacity: 150 x 365 mm - Cutting capacity: 130 x 440 mm - Cutting capacity: 100 x 530 mm - Cutting capacity: 60 x 580 mm - Cutting capacity: 30 x 610 mm - Cutting cycle: 6 seconds - Hydraulic cross-cutting unit - Worktable inclined by 8° - Minimum workpiece thickness: 10 mm - Safety cover over cross-cutting unit - CE standard - Weight: 1500 kg Podpfov A Htkex Acaepw Electrical connection data: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction ports: 4 x 100 mm diameter - Extraction capacity: 2400 m³/h - Air velocity at the center of the extraction port: approx. 25–35 m/s Electronically controlled pusher: - Feed length: 6000 mm - Max. pusher speed: 90 m/min - Driven by brushless servo motor - Feed system with precision rack and pinion and feedback via servo motor - Pneumatic lifting of the pusher at cycle end and upper return - Photocell for workpiece length measurement - Photocell for defect detection - Marking with fluorescent chalk - Working surface inclination 8° - Positioning tolerance: +/- 0.4 mm Control system: - High-resolution 12" touchscreen monitor (800 x 600 pixels) - Creation of cut lists directly at the machine control - Up to 1000 cut lists with 10 dimensions each - One list with up to 10,000 dimensions in sequence - 3 optimization options (maximum length, sequence, and workpiece sequence) - 3 optimization options (volume, minimal waste, and priority) - Standard USB and Ethernet port - Includes OPTI function for automatic measurement of the workpiece to be cut. Optimal for processing material of variable lengths, with single or bundle infeed - 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimal waste, and priority) - Includes OPTI PLUS function for reading markings to ensure full optimization and removal of knots and defects. - Marking with chalk Options: - Pneumatic side clamp €850.00 - Creation of cut lists at PC €360.00 - Outfeed table €360.00/m

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 0x0x0 mm Weight: 1000 kg Total power requirement: 8.5 kW Fully optimized automatic cross-cut saw TR-500 MATRIX-6000 - Motor drive power: 7.5 kW - Saw blade diameter: 500 x 30 mm Z=144 - Cutting capacity according to cutting diagram - Cutting capacity 135 x 280 mm - Cutting capacity 125 x 295 mm - Cutting capacity 95 x 325 mm - Cutting capacity 80 x 340 mm - Cutting capacity 55 x 360 mm - Cutting cycle: 4 seconds - Pneumatic cross-cutting unit - 8° inclined worktable - Minimum workpiece thickness: 10 mm - Safety cover over cross-cutting unit - CE standard - Weight: 1000 kg Connection data: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction ports: 4 x diameter 100 mm - Extraction capacity: 2400 m³/h - Air consumption per cycle: 4 Nl - Air velocity at center of extraction port: approx. 25–35 m/s Ppjdpov A Htdofx Acasw Electronically controlled pusher: - Feed length: 6000 mm - Pusher speed: 90 m/min. - Drive by brushless servomotor - Feed system with precision rack and pinion, measurement by servomotor - Pneumatic pusher lift at end of cycle and upper return - Photoelectric sensor for workpiece length measurement - Photoelectric sensor for defect detection - Marking with fluorescent chalk - 8° inclined working surface - Positioning tolerance: +/- 0.4 mm Control system: - High-resolution 12" touchscreen monitor (800 x 600 pixels) - Cutting list creation directly via machine control - Up to 1000 cutting lists with 10 sizes each - Single list with 10,000 dimensions in sequence - 3 optimization options (maximum length, sequence, workpiece sequence) - 3 optimization options (volume, minimal waste, priority) - Standard USB and Ethernet ports - Including OPTI function for automatic measuring of the workpiece to be cut. Optimal solution for processing material with variable lengths, for single or bundle feeding - 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimal waste, priority) - Including OPTI PLUS function for mark detection, enabling full optimization and removal of knots and defects - Marking with chalk Option: - Pneumatic side clamp €850.00 - Cutting list creation via PC €360.00 - Outfeed table €360.00/m

Gamybos metai: 2025, būklė: naujas, Dimensions (LxWxH): 8015 x 1635 x 2125 mm Weight: 2400 kg Total Power Requirement: 13.2 kW Longitudinal Saw GL-6000 - Maximum cutting length: 6200 mm - Maximum cutting width: 600 mm - Maximum cutting height: 160 mm - Saw blade diameter: 550 mm - Saw blade bore: 30 mm - Saw motor power: 11 kW - Feed gear motor with inverter: 1.1 kW - Width adjustment motor: 1.1 kW - Total power: 13.20 kW - Voltage: 400 V, 50 Hz - Saw blade feed speed, stepless: 0 - 80 m/min - Saw blade return speed: 80 m/min - Compressed air connection: 6 bar - Extraction ports: 2 x 130 mm, 1 x 200 mm - 7" touch screen - Rubberised foot pedal for start and feed control of the saw carriage - Ammeter for automatic reduction of cutting speed - Safety extraction beam with integrated lamella guard - Electric width adjustment with ball screw and 2 speeds - HM saw blade included: 550 x 30 x 4.5 mm Z 44 - 3 positions for saw blade height adjustment - Lowerable saw blade Pjdpfx Asvz E Nbocaopw - ETHERNET connection for online service - Dimensions: L=8015, W=1635, H=2125 mm - Weight: 2400 kg

Būklė: naudotas, Gamybos metai: 2007, bendras aukštis: 1 750 mm, bendras ilgis: 1 000 mm, bendras plotis: 1 810 mm, Spalva: Pilka Svoris: 1.240 kg - Pagaminimo metai: 2007 - Dokumentacija prieinama: Ne - CE ženklinimas: Taip - CE sertifikatas: Ne - Serijos numeris: 100658 - Pagrindinio variklio galia [kW]: 7,5 - Veleno pjūklo disko skersmuo [mm]: 30 - Įtampa [V]: 400 - Galia [kW]: 8,0 - Transportavimo matmenys: 1000mm x 1810mm x 1750mm (ilgis x plotis x aukštis) - Transportavimo svoris [kg]: 1240kg - Transporto paketų skaičius [vnt.]: 4 Ppedpfewniuajx Acasw Finansinė informacija PVM: Nurodyta kaina be PVM PVM/PVM skirtumo apmokestinimas: PVM atskaitomas verslo subjektams Pristatymas ir įrenginių priėmimas galimi bet kada visiems pramonės srities įrenginiams Yorick Diebels

Būklė: geras (naudotas), Gamybos metai: 1992, I am selling an automatic pneumatic crosscut saw GreCon Dimter 2004, year of manufacture 1992. Automatic infeed table / throughfeed system Outfeed table 3 ejectors on the left outfeed table. Total length: 15.50 m Optimization with automatic defect detection and automatic cutting pattern programming. Immediately available. Spare parts and documentation included. Psdjt Ir Nqepfx Acaspw

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, 1 used, very well-maintained fully hydraulic cold circular saw automatic machine with flat vertical guides Max. saw blade diameter: 325 mm Cutting range 90°: - Round: 100 mm - Square: 85 x 85 mm - Rectangular (flat): 165 x 85 mm Infinitely variable speed range: 20 - 100 rpm Max. saw blade dimensions: 325 x 3.0 x 40 mm Single feed: up to max. 550 mm Multiple cut feed: for lengths over 550 mm Working height: 930 mm Drive power: 3 kW / 400 V Machine dimensions (L x W x H): 2,150 x 1,450 x 1,950 mm Weight: approx. 650 kg Accessories / Special features: • Fully hydraulic design Podpfx Acsy E Uk Ieaspw • Fully automatic operation, single cuts also possible • Clamping feed system • 90° cutting angle • Continuously variable speed range 20 - 100 rpm • Length adjustment via programming on the control panel • Speed and feed can be continuously adjusted during operation on the operator panel • Single and multiple feed • Flat vertical guides, adjustable • Coolant system • Micro-spray unit • 1 used saw blade included • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Būklė: naudotas, Gamybos metai: 2002, DVIPUSĖ KAMPINĖ PJŪKLAS (STIKLO JUOSTŲ PJŪKLAS) OMGA TRF 527 NC su žvaigždiniu ribotuvu Pagaminimo metai: 2002 Min. ir maks. atstumas tarp agregatų: 158 mm, 2800 mm Pedpfxoxwumqo Acaepw Pjovimo geba prie 90 laipsnių: 55 mm Pjovimo geba prie 45 laipsnių: 40 mm Maksimali pjovimo aukštis: 40 mm Variklio galia: 2 x 1,18 kW Pjūklo skylės skersmuo: 30 mm Pjūklo disko skersmuo: 220 mm Ašies greitis: 5000 aps./min.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, maximum aggregate spacing 3.3 m two motors of 2.2 kW each disc tilt Ppjdpjvby T Usfx Acaow cutting angle adjustment range -45/+45 degrees maximum disc diameter 330 mm pneumatic clamps disc speed 3,765 rpm CE marking

Būklė: labai geros būklės (naudotas), Gamybos metai: 1990, Funkcionalumas: visiškai funkcionalus, ritininio padavėjo ilgis – 6050 mm juostinio išleidimo įtaiso ilgis – 6100 mm pjūklo disko skersmuo – 500 mm modelis: R500 pakrovimas su varomais ritininiais konvejeriais maitinimas: 380 V Ppedpex Nnbzsfx Acasw

Būklė: labai geros būklės (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, pjūklo disko skersmuo: 600 mm, pjovimo aukštis (maks.): 160 mm, maksimalus pjovimo aukštis 160 mm Ppodsymnvlspfx Acasw maksimalus pjovimo plotis 610 mm diskinio pjūklo skersmuo 600 mm minimalus diskinio pjūklo skersmuo 590 mm diskinio pjūklo apsukos 2800 aps./min variklio galia 7,5 kW 2 atmušos gamybos metai 2001 svoris apie 700 kg

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2012, KASTO U 10 / Metalo diskinis pjūklas su medžiagos padėjimo staleliu - CE žymėjimas - Gamybos metai: 2012 - Pjovimo sritis / apvalus 90°: 100x100 mm - Pjovimo sritis / plokščias 90°: 90x90 mm - Pjovimo sritis / kvadratas 90°: 170x90 mm - Kampinio pjovimo įranga - Aušinimo skysčio sistema - Spaustuvas su priešspaude švariems pjūviams be atplaišų - Be laipsnių reguliuojamas pjūklo įstūmimas - 2 pjovimo greičiai - Diskinio pjūklo matmenys: 350x2,5x32 mm - Pjūklo variklis: 1,8 kW Matmenys: Ilgis x Plotis x Aukštis 1,2 x 0,8 x 1,9 m / Svoris 500 kg Pedpfezakq Ejx Acaepw Gali būti netikslumų ar įvedimo klaidų.

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, 3 kW variklis Psdjcyd N Hjpfx Acaepw Pakreipiamas į kairę iki 45°, į dešinę iki 25° Rankena valdoma iš nugaros, pageidaujant už papildomą mokestį - iš priekio Į kairę pasukamas iki 60° Į dešinę pasukamas iki 45°, pjovimo plotis pasukus 300 mm Pjovimo aukštis 170 mm, pjovimo plotis 430 mm esant 90 laipsnių kampui 6 m ilgio išleidimo ritininė linija su skalę ir sustojimo stumdykle kairėje (ritininių linijų montavimo pusės gali būti keičiamos) 4 m padavimo ritininė linija dešinėje 1 vnt. mašinos stovas 1 vnt. pjūklas medienai arba aliuminiui Ritininės linijos komplektuojamos su plieno arba plastiko ritinėliais pagal pageidavimą

Būklė: labai geros būklės (naudotas), pjovimo aukštis (maks.): 120 mm, pjovimo plotis (maks.): 700 mm, Right-hand machine, machine no. 188 hydraulic width adjustment, electrically adjustable Infinitely variable feed rate adjustment 0 - 80 m/min Drive motor 37 kW with V-belt pulley and motor tensioning rail Podpfxsv Raqxe Acaepw Various saw heads, spacer rings, and saw blades Infeed table with individual stands Fixed outfeed table The machine has been completely refurbished and is in top condition.

Gamybos metai: 2008, būklė: paruoštas naudoti (naudotas), Galima visiškai automatinė didelės spartos Bewo vamzdžių žiedinė pjovimo staklė. Apvalių vamzdžių skersmens diapazonas: 8 mm–90 mm, min. kvadratinio profilio matmenys X/Y: 10 mm/10 mm, maks. kvadratinio profilio matmenys X/Y: 80 mm/80 mm, padavimas: 50 m/min–300 m/min, pjūklo disko skersmuo: 350 mm, maks. našumas: 8000 vnt./val., maks. vienu metu apdorojamų vamzdžių skaičius: 4. Yra dokumentacija. Galima apžiūra vietoje. Ppedpfxsy Nm Umj Acajw

Būklė: geras (naudotas), Gamybos metai: 2000, Parduodu dvišalį kampinį pjūklą OMGA TR2A. Pjovimo ilgis: 390 - 3000 mm Ppodpotwbcyofx Acasw Maksimali pjovimo plotis: 170 mm Maksimali pjovimo aukštis: 90 mm Sukti galvutės kampu 0 ± 45° 2 horizontalūs ir 2 vertikalūs pneumatiniai medžiagos prispaudėjai 2 varikliai po 1,62 kW (2,2 AG) Gera būklė. Galimas iškart.

Būklė: naudotas, STROMAB TR 500 – Under-Table Crosscut Saw with Pneumatic Feed For sale is a STROMAB TR 500 under-table crosscut saw featuring a pneumatic saw blade feed and a blade diameter of 500 mm. This machine is ideal for precise and efficient cross-cutting of workpieces in workshop environments. Year of manufacture: 2009 Machine number: 3229 — Technical Data • Maximum cutting width: 360 mm • Cutting height: 135 mm • Saw blade diameter: 500 mm • Infeed roller conveyor length: 1,000 mm • Outfeed roller conveyor length: 1,000 mm • Table height: 850 mm • Main motor: 7.5 kW • Saw blade feed: pneumatic • Compliance marking: CE mark • Weight: approx. 420 kg — Condition & Delivery The machine is in technically perfect condition and ready for immediate use. • Inspection possible at any time • Shipping securely packed on pallet by freight forwarder available at short notice — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices are net plus 19% VAT. Subject to change and errors excepted. Psdpfoxiza Ujx Acaepw

Būklė: naujas, Randek Cross-Cut Saw SPL728 Computer-controlled, rotating, with LAN (Ethernet) connection for downloading or storing saw jobs (text file in ASCII format). The number of programs that can be stored is limited only by the size of the hard drive. Thanks to the graphical touchscreen (HMI), the operator can monitor all details directly on the screen or enter sawing jobs directly. This minimizes disruptions to the production process. Saw Blade: Carbide-tipped, low-noise, 700 mm Ø / 116 teeth, 360° horizontal rotation, 90°–28° tilting, 250 mm plunge depth Podpfx Acsfg Tateajpw Motor power: 7.5 kW. Automatically closing, locked safety guard made of plastic. Infeed Table, optionally 4.0 / 5.8 / 8.2 / 10.6 m long Infeed roller, IRO4-120, driven. Transport rollers 76 mm Ø, roller length 400 mm, roller spacing C/C 500 mm. Rear stop 120 mm. Hold-down device, pneumatic, 2 units Feed direction configurable from left or right. Outfeed Table, optionally 5.8 / 7.0 / 8.2 / 9.4 / 10.6 / 11.8 / 13 m long Computer-controlled roller conveyor type LX. Guide roller for outfeed, rollers 76 mm Ø, length 400 mm. Rear stop 120 mm. 2 computer-controlled longitudinal stops, driven by toothed belt. Stop 1 – designed for cut lengths up to 50 mm. Stop 2 – traverses the entire length of the outfeed table. Positioning of the longitudinal stops and adjustment of the cutting angles is done independently and computer-controlled. Maximum travel speed of the longitudinal stops: 1 m/s. Timber feed: 1 unit Retracting devices: 2 units Feed direction: configurable from left or right.

Būklė: naudotas, Holtec pakuočių skersavimo pjūklas - Hidraulinis pjūklo nuleidimas - Ilgio matavimas - Hidraulinis paketo iškėlimas Ppjdpexzr Efofx Acaew

Būklė: geras (naudotas), Gamybos metai: 1993, TRENNJÄGER metalo diskinis pjūklas, kampinis pjūklas Su išilginiu atmušėju! Pjdpfjx U Dl Tjx Acaepw Pjūklo disko skersmuo: 400 mm Pjovimo ilgis: 400 mm Pjovimo skersmuo: 130 mm Pagaminimo metai: 1993 380V Galia: 4,5 kW

Gamybos metai: 1980, būklė: geras (naudotas), Ulmia Circular Saw 1630 Saw blade dimensions: Max. diameter: 300 mm Speed range: 95 - 3000 rpm Total power: 1.1 kW Machine weight: 270 kg Space requirement (W x D x H): Pjdpfx Acjd Ddgpeajpw 0.9 x 0.73 x

Būklė: nepatikrintas (naudotas), Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: 014105, pjūklo disko skersmuo: 250 mm, bendras svoris: 250 kg, sukimosi greitis (maks.): 5 000 aps./min, vidinis skersmuo: 30 mm, Nėra minimalios kainos – garantuotas pardavimas didžiausią kainą pasiūliusiam! Ppodpfew Hrzmsx Acasw Pakrovimas galimas 2025-09-08 arba 2025-09-09! TECHNINĖS DETALĖS Nominalus apsisukimų skaičius: 5 000 aps./min. Pjūklo disko skersmuo: 250 mm Ribotuvas: iki 6 300 mm Didžiausias pjovimo gylis: 90 mm Vidinis skersmuo: 30 mm STAKLIŲ DETALĖS Matmenys ir svoris Matmenys (I x P x A): 6400 x 900 x 1600 mm Svoris: 250 kg KOMPLEKTACIJA Su ritininio tako montavimo rinkiniu Pastaba: pjūklas neturi ištisinio ritininio tako – paskutinis ritinys laiko profilį gale prie ribotuvo.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1989, RANDEK SP700 Crosscut Saw Manufacturer: Randek, Sweden Year of manufacture: 1989 S/N: 1989-02-08 In good condition The Randek SP700 series is a reliable saw designed for manufacturers of roof trusses and houses worldwide. The SP700 saw is efficient, user-friendly, and precise. It has been on the market for a long time and is continuously improved in close cooperation with our customers. The saw blade of this semi-automatic saw supports mitre cuts, i.e., it can perform all cuts you require. The large saw blade diameter (700 mm) also allows multiple layers of timber stacks to be cut simultaneously. - Mitre cuts from 0° to 360° - Cutting heights up to 250 mm; three boards can be cut per cycle - PLC-programmable saw - Clamping of timber close to the cutting area for precise cuts Roller conveyor system with 5 adjustable pneumatic stops. Length: 6.25 m Outfeed roller conveyor: 4.10 m Pedpfxeivarye Acaepw Complete line length: 11.5 m Technical specifications subject to change.