International 574 pirkti naudotą (8 803)

Gamybos metai: 1972, būklė: paruoštas naudoti (naudotas), Parduodama 2020 metais pilnai atnaujinta Voumard vidinio cilindrinio šlifavimo staklės. Šlifavimo skersmens diapazonas: 5–200 mm, šlifavimo gylis: 250 mm, sūkių dažnis: 1000 aps./min, greičio reguliavimas: bepakopis. Galima apžiūra vietoje. Hjdpfx Aoy E S Hmehgsp

Gamybos metai: 1962, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 1886, Used vertical hydraulic internal broaching machine with 3 broaching stations Tensile force: 10,000 kg Broaching length: 1,200 mm Broaching stations: 3 units Distance between broaching stations: 380 mm Holder diameter for broach heads: 3 x Ø ___mm Passage width between cylinders: max. XXX mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 7 m/min Return speed: hydraulically infinitely variable from 7 up to max. 25 m/min Machine footprint (W x D x H): approx. 1,300 x 1,450 x 3,350 mm (without pit) Power supply / connected load: 380 Volt 50 Hz / 8.0 kW Accessories / Special Equipment: The machine is equipped with a workpiece table with 3 bores for 3 broaching stations. The tool clamping system is designed for spring-mechanical locking in both the draw bridge and the feeder. The machine has an integrated coolant system. Remarks: The machine is designed for use in series production. For optimal utilization, it ideally requires a foundation (pit) or alternatively a platform. Broach heads and mandrel ejectors are available upon request. The machine can be inspected at our warehouse. Hsdpfst Dwb Djx Ahgep

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Su CNC valdymu FANUC 16-T. Techniniai duomenys ir priedai pagal atskirą PDF. Mechaninė mašinos dalis visiškai suremontuota. Hodpfjy Txk Usx Ahgjp

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Thread cutting capacity in steel (ST 60): M22 Hedpfx Ahsy Hf Akjgjp Thread cutting capacity in cast iron: M27 8 spindle speeds: 180 - 1120 rpm Console version with height-adjustable head with or without ROMAI multi-spindle head

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, Weber vidaus vibratoriaus/keitiklis IVUR 50 – Pagaminimo metai 2025 Naudotas profesionalios nuomos parko technika iš Kurt König Baumaschinen GmbH, Einbeck. Būklė ir pastabos: - Būklė: Naudotas, reguliariai prižiūrėtas - Funkcija: Pilnai veikiantis - Produktų nuotraukos bus pateiktos vėliau – susisiekite dėl naujausių nuotraukų - Apžiūra Einbeck mieste (37574) galima susitarus iš anksto Kaina 950 EUR + PVM | EXW Einbeck | Pristatymas pagal užklausą Hsdpfx Aoy A Hcqehgjp

Gamybos metai: 2026, būklė: beveik kaip naujas (parodų įrenginys), Electronic Tapping Machine JT3150 Very easy operation via display directly on the motor, Blind hole depth programmable, Technical details: - Brushless motor 750 Watt 220V - Multifunctional head - 3-joint articulated arm system - Tapping capacity in steel: M3-M16 - Reach up to 1900 mm - Spindle GR2 Accessories: - Positioning magnet Gr.2 - Quick-change adapter Gr.2 - Collets for M3-M4-M5-M6-M8-M10-M12-M14-M16 - Control unit on the motor - Drill chuck (1-13 mm) Hodpfx Aehpqadehgep

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, šlifavimo gylis: 210 mm, centro aukštis: 510 mm, veleno greitis (min.): 9 000 aps./min, veleno greitis (maks.): 15 000 aps./min, šlifavimo ilgis: 1 800 mm, sukimosi greitis (maks.): 15 000 aps./min, sukimosi greitis (min.): 9 000 aps./min, Veleno sukimosi greitis: min. 9 000 aps./min / maks. 15 000 aps./min Hsdpfx Aeyg Hdushgsp Centru aukštis: min. 230 mm / maks. 510 mm Veleno eiga: 210 mm horizontaliai Stalo dydis: 700 x 1 000 mm Stalo eiga: 1 800 mm Įranga: - Stalo pastūma - Horizontalus šlifavimo pastūma - Aušinimo skysčio įranga - Stalo apsauginės durys

Būklė: naudotas, VOUMARD 5 A VIDAUS ŠLIFUOKLIS Šlifavimo skersmuo: 5-200 mm Maks. šlifavimo gylis: 250 mm Aukštis per centrą: 180 mm Maks. ruošinio ilgis: 500 mm Veleno praėjimo skersmuo: 50 mm Ruošinio galvutės sukimosi greitis: 125-1000 aps./min Ruošinio galvutės posvyris: 90° Hjdpsza Hk Usfx Ahgep Stalo eiga: 3/600 mm Stalo greitis: 0-10 m/min Šlifavimo veleno apsisukimai: 3600-40000 aps./min Galia: 8-10 AG Matmenys: 3200x1630 mm Svoris: 2700 kg

Būklė: naudotas, Išorinio/vidinio cilindrų šlifavimo staklės JONES-SHIPMAN, modelis 1310 Darbo sritis: Ø 200 x 450 mm (8'' x 18'') Pakreipiamas stalas Šlifavimo diskas: Ø 300 mm x storis 25 mm x kiaurymė Ø 125 mm Pavaros rato greitis: 1750 ir 2300 aps./min Sukamoji šlifavimo akmens laikiklio atrama Tiekiama be vidinio šlifavimo verpstės Su 1 tepalo baku Įtampa: 380 V Ilgis: 1800 mm Plotis: 1600 mm Bendras aukštis: 1900 mm Hodpjy Nzhzofx Ahgop Svoris: apie 2 T

Gamybos metai: 1969, būklė: paruoštas naudoti (naudotas), Max. grinding depth: 80 mm, spindle-to-table distance: 145 mm, spindle bore: 28 mm, connected load: 7 kW, length: 2100 mm, width: 1400 mm, height: 950 mm, weight: 1.6 t, complete with documentation; on-site inspection is possible. Hjdpfxeqzkdmj Ahgjp

Gamybos metai: 1981, būklė: geras (naudotas), Manufacturer: National Broach Model: GHC 12" Hsdpehad Avsfx Ahgep Year of manufacture: 1981 Max. workpiece diameter: 355 mm Min./max. pitch circle diameter: 100–152 mm Max. face width: 63.5 mm Min./max. module: 1.25–6.35 mm Weight: 3.4 t Operation: Internal gear honing

Gamybos metai: 1980, būklė: naudotas, max. pulling force: 10 t max. stroke: 1250 mm max. cutting speed: 10 m/min max. return speed: 27 m/min max. workpiece diameter: 320 mm broaching stations: 3 pcs weight: 4.8 t automatic tool feeder Hodecdtplopfx Ahgop hydraulic clamping for drawing head and end piece holder automatic loading device for workpieces up to 100 mm diameter magnetic strip chip conveyor

Gamybos metai: 1960, būklė: naudotas, max. pulling force: 20,000 kg max. lift: 1,250 mm max. cutting speed: from 1 m/min to 7 m/min max. return speed: from 5 m/min to 25 m/min max. workpiece diameter: approx. 140 mm max. tool diameter: approx. 50 mm broaching stations: 2 units The machine is equipped with a 2-station rotary indexing table. Hsdpfx Aoui Sbohgop The machine features an automatic tool feeder and is designed for manual series production. The tool locking mechanism in the pull bridge, as well as in the tool feeder, operates via spring mechanism (pull head DIN 1417).

Gamybos metai: 1959, būklė: naudotas, max. Zugkraft: 16 t max. Hub: 1250 mm Schnittgeschwindigkeit: 5.6 m/min Rücklaufgeschwindigkeit: 30 m/min Hedpfx Ahj Rwa Ujgsp

Gamybos metai: 1956, būklė: naudotas, mašinos/transporto priemonės numeris: 1413, Manufacturer: Karl Klink Model: RISZ 10x 1200 Year of manufacture: 1956 Weight: 3450 kg Machine No.: 1413 Hjdpfxodbmgmj Ahgsp General information / Technical data: Used vertical hydraulic internal broaching machine with up to 3 broaching stations, in operational condition Pulling force: 13,000 kg (maximum) Broaching length: 1200 mm Number of broaching stations: 3 Distance between broaching stations: 100 mm Clamping diameter of pull head: Ø 85 mm Passage width between cylinders: max. 390 mm Cutting speed: hydraulically and steplessly adjustable from 1 m/min to max. 7 m/min Return speed: hydraulically and steplessly adjustable from 7 m/min to max. 25 m/min Machine dimensions (W x D x H): approx. 1150 x 1500 x 3725 mm (tool feeder extended) Power supply / Connected load: 380 Volt 50Hz / 7.5 kW Accessories / Special equipment: The traverse of the machine is equipped with 3 broaching tool holders, while the workpiece table has 1 broaching station (modifiable). The tool clamping system as well as the tool feeder are designed for a spring-actuated locking mechanism (DIN 1415). The machine is fitted with an automatic tool feeder; the available feeder mount is suitable for just one tool (center broaching station). The machine is equipped with an integrated coolant system for cutting oil. Remarks: The machine is in good condition for its age and is ready for immediate use. It is designed for manually operated production with medium batch sizes. The machine features an automatic cycle. For operation, ideally a machine pit or alternatively a pedestal is required. Pull heads, tool holders & tools are available upon request. The machine can be inspected under power at our warehouse.

Gamybos metai: 1951, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 1133, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1951 Weight: approx. 2750 kg Machine No.: 1133 General / Technical Data: Hydraulic horizontal broaching machine, in good, operational condition Broaching stroke: 1500 mm Broaching stations: 1 unit Tensile force: 10,000 kg at 3 m/min (5,000 kg at 7 m/min) Broaching tool clamping: Universal pull head for flat shanks up to 26 mm width Thru-hole in clamping table: Ø 105 mm Workpiece diameter: max. 430 mm (limited by the oil and chip tray) Cutting speed: hydraulically continuously adjustable from 2 m/min to 7 m/min Return speed: hydraulically continuously adjustable from 7 m/min to 25 m/min Hsdpfodcdrpsx Ahgep Machine dimensions (W x D x H): approx. 6200 mm x 700 mm x 1900 mm (without working area) Power supply / connected load: 380 Volt 50 Hz / 8 kW Hydraulic motor: 7.5 kW Accessories / Special Features: • The machine is equipped with a universal pull head for flat shanks • The machine includes an integrated coolant-lubrication system • The machine has an oil and chip tray with a tool feeder carriage Remarks: The machine is ideal for producing keyways and profiles. The machine runs smoothly and is clean in the area of the guides and cylinder. On request, broaching needles as well as broaching mandrels can be supplied. The machine is available for demonstration under power in our warehouse.

Gamybos metai: 1980, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 03.2123, Manufacturer: Arthur Klink Model: RISZ 25 x 2500 x 500 Year of Manufacture: 1980 Machine No.: 03.2123 General / Technical Data: Used vertical hydraulic broaching machine with 3 broaching stations, in very good condition Pulling force: 25,000 kg Broaching length: 2,000 mm Broaching stations: 3 units Distance between broaching stations: 160 mm Clamping diameter of draw heads: 3 x Ø 100 mm Passage width between cylinders (nominal): 500 mm Passage width between cylinders (measured): max. 590 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10 m/min Return speed: hydraulically infinitely variable from 5 up to max. 25 m/min Machine footprint (W x D x H): approx. 3,400 mm x 3,400 mm x 6,900 mm (without pit) Power supply / Connection rating: 380V / 50 Hz / 22 kW Accessories / Special Equipment: The machine is currently supplied without a workpiece table. Previously, a sliding workpiece table was mounted on the machine, equipped with a special external broaching clamping device (workpiece sliding table can be modified). The tool clamping system is equipped with a hydraulic lock both in the draw bridge and the feeder. The machine is fitted with a coolant unit including integrated chip conveyor. Remarks: Hjdpsdffzfofx Ahgjp The machine is in very good condition and retains its original paint. It is designed for use in series production, ideally requiring a foundation (pit) for optimal operation. Draw heads and ejector needles are available on request. The machine can be inspected in our warehouse.

Gamybos metai: 1958, būklė: naudotas, mašinos/transporto priemonės numeris: 1545, Manufacturer: Karl Klink Model: RIS 6 x 1000 Year of manufacture: 1958 Weight: 2,500 kg General / Technical Data: Used vertical hydraulic internal broaching machine with 1 broaching station, fully operational. Tensile force: 6,000 kg Broaching length: 1,000 mm Hsdpfx Asda Ugiehgsp Draw head diameter: Ø 85 mm Passage width between cylinders: max. 280 mm Cutting speed: hydraulically variable, stepless from 1 m/min up to max. 7 m/min Return speed: hydraulically variable, stepless from 7 m/min up to max. 25 m/min Machine dimensions (W x D x H): approx. 1,000 x 1,200 x 2,800 mm Power supply / Connected load: 380 Volt, 50 Hz / 4 kW Accessories / Special Equipment: The machine is equipped with a workpiece table for 1 broaching station. The tool clamping system is designed for mechanical spring locking (DIN 1415). An integrated coolant system is included. The machine features a double draw head for two flat broaching tools with workpiece support plate. Remarks: The machine is in age-appropriate good condition and ready for immediate use. It is designed for manual operation in medium-batch production. Installation ideally requires a machine pit or, alternatively, a platform. Draw heads are available on request. The machine does not have a tool loader. The machine can be inspected under power at our warehouse.

Gamybos metai: 1994, būklė: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: 04.2398, Manufacturer: Arthur Klink Model: RIW 10 x 1500 x 500 Machine No.: 04.2398 Hodpfegyd T Eox Ahgop Year of Manufacture: completely overhauled by the manufacturer in 1994 Weight: 3,700 kg Pulling Force: 10,000 kg (100 kN) Maximum Stroke: 1,500 mm Maximum Workpiece Diameter: Ø 500 mm Broaching Speeds: infinitely variable from 1 m/min to 6 m/min Return Speed: infinitely variable up to 20 m/min Power Supply: 400V / 50Hz

Gamybos metai: 1964, būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2016, used vertical hydraulic internal broaching machine with 3 broaching stations Pulling force: 16,000 kg Broaching length: 1,250 mm Broaching stations: 3 units Hodpfx Aet Dv I Ashgsp Distance between broaching stations: 380 mm Mounting diameter for pull heads: 3 x Ø ___ mm Cutting speed: hydraulically infinitely variable from 1 m/min up to a maximum of 7 m/min Return speed: hydraulically infinitely variable from 7 up to a maximum of 25 m/min Machine footprint (W x D x H): approx. 2,200 x 1,550 x 4,200 mm (without pit) Power supply / Connected load: 380 Volt, 50 Hz Accessories / Special features: The machine is equipped with a workpiece table featuring 3 bores for 3 broaching stations. The tool clamping system is designed for spring mechanical locking in the pull bridge and hydraulic-mechanical locking in the feed. The machine underwent an electrical (Siemens S7 PLC) and mechanical retrofit in 2004. The unit is fitted with an integrated coolant system. Remarks: The machine is designed for use in series production; for optimal operation, a foundation pit is recommended, or alternatively, a platform may be used. Pull heads and broach lifters are available upon request. The machine can be inspected at our warehouse.

Gamybos metai: 1960, būklė: nepatikrintas (naudotas), Forst RF 20x2000 Internal Broaching Machine Hodshu E Egepfx Ahgop -WKG 189- Specifications: Manufacturer: Forst Model: RF 20x2000 Year of manufacture: 1959 Maximum pulling force: 20 t Maximum stroke: 2000 mm Maximum cutting speed: 5.6 m/min Maximum return speed: 30 m/min Maximum workpiece diameter: Ø 300 mm Maximum tool diameter: Ø 90 mm Weight: 3.5 t Note: Supplied without chip tray.

Būklė: nepatikrintas (naudotas), Forst RF 16 Internal Broaching Machine -WKG 1371- Hsdpfx Aohu E N Dehgsp Technical Specifications: Manufacturer: Forst Model: RF 16 Maximum Pulling Force: 16 t Maximum Stroke: 1200 mm Maximum Cutting Speed: 5.6 m/min Maximum Workpiece Diameter: Ø 700 mm Maximum Tool Diameter: Ø 120 mm Workpiece Mount Bore: Ø 70 mm Note: Control valve missing

Gamybos metai: 1960, būklė: visiškai atnaujintas (naudotas), mašinos/transporto priemonės numeris: 1732, Vertical internal broaching machine with index plate by Karl Klink Model: RSI6DT Machine No.: 1732 Year of manufacture: 1960 Weight: 3.2 t Broaching force: 6,000 kg With index plate (2 stations) Power supply: 380V / 50Hz Rated current: 15 A Connected load: 4 kW Hjdpfx Ajgyd Svehgop The machine has been fully overhauled and is therefore in very good condition.

Gamybos metai: 1964, būklė: visiškai atnaujintas (naudotas), mašinos/transporto priemonės numeris: 2041, Vertical internal broaching machine with index plate by Karl Klink Type: RSI8DT1 Machine No.: 2041 Year of manufacture: 1964 Weight: 3.2 t Broaching force: 8,000 kg With index plate (2 stations) Power supply: 380V / 50Hz Rated current: 25 A Connected load: 5.5 kW The machine has been completely overhauled and is therefore in very good condition. Hjdogyd S Depfx Ahgjp

Gamybos metai: 1965, būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2549, General / Technical Data: Used horizontal hydraulic internal broaching machine in age-appropriate good condition with heavy-duty manual tool feeder. Broach stroke: 2,000 mm Pulling force: 25,000 kg (250 kN) Mounting in the pull bridge: Ø 105 mm cylindrical Through-hole in clamping table: Ø 125 mm Clamping surface / workpiece area: 440 mm x 440 mm Maximum workpiece diameter: approx. 800 mm (limited by the tool feeder’s tool tray) Cutting speed: hydraulically, steplessly adjustable from 1.5 m/min to 7 m/min Return speed: hydraulically, steplessly adjustable from 7 m/min to 25 m/min Oil volume: hydraulics approx. 450 L / coolant approx. 100 L Machine footprint (W x D x H): approx. 8,400 mm x 1,350 mm x 1,800 mm (excluding work area) Power supply: 380 Volt, 50 Hz Connected load: 19 kW Features: • Mechanical-hydraulic control for broach and return stroke • Integrated coolant and cutting fluid system • Manual tool feed • Broaching carriage with pull head mounting guided flat on both sides • Adjustable pulling force limiter • Pulling force indicator Accessories: • 1 universal pull head for flat shanks up to approx. 40 mm width • Indexing device (see photos) Hedpfxotuuvzj Ahgsp • Various special adapters and clamping devices • Machine documentation Remarks: The machine is suitable for producing keyways using flat broaching tools as well as profile broaching. Thanks to the machine bed and the robust broaching tool feeder, the machine is ideally suited for heavy-duty profile broaching tools. The machine is used and in good condition for its age. The machine is available for inspection at our warehouse. The machine has newly arrived in our stock and has not yet been overhauled, neither technically nor cosmetically. Pull heads for profile broaching are available on request, depending on DIN standard, dimension, and subject to stock.