Ingersoll Bohle pirkti naudotą (61)

Būklė: geras (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, slėgis: 12 juosta, bendras svoris: 400 kg, įėjimo įtampa: 400 V, galia: 4,3 kW (5,85 AG), High-Performance Refrigerated Compressed Air Dryer 22 m³/min Ingersoll-Rand Type: TS220 SS Dedsrfyrpepfx Akksck Year of Manufacture: 2003 Airflow: max. 22,000 l/min Maximum Pressure: 12 bar Refrigerant: 407C gas – 3.5 kg Mains Voltage: 400 V 50 Hz 7.5 A Connection: DN80 Machine Dimensions: Length: 1010 mm Width: 1500 mm Height: 1310 mm Weight: 400 kg Ambient Temperature: 2°C – 50°C Maximum Inlet Temperature: 60°C IP Rating: IP 44 standard

Būklė: naudotas, 4 adjustable clamping jaws INGERSOLL for faceplate Chuck jaws for lathe chuck, mechanical clamping device, clamp block No.: 39.02.10000 / 501.397 Jaw width: 70 mm Jaw length: 180 mm Jaw carrier height: 150 mm Base plate: 325 x 265 mm - Reversible stepped jaws for turning and boring - Jaw adjustment via trapezoidal thread spindle Dsdpsu Axzksfx Akkeck - Jaw carrier with 6 slots 40 x 30 mm for mounting - Slot spacing: 280 x 133 and 220 x 90 mm (center-to-center) Dimensions L x W x H: 325 x 265 x 215 mm Weight per jaw: 36.5 kg Total weight (all 4 jaws): 146 kg Good condition

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, veikimo valandos: 26 000 h, Funkcionalumas: visiškai funkcionalus, bendras svoris: 1 603 kg, galia: 55 kW (74,78 AG), 2014 m. „Ingersoll Rand R55i“ kompresorius Dcjdpfx Ajzrxhhekkok 55 kW sraigtinis kompresorius Pilna techninio aptarnavimo istorija Apytiksliai 26 000 valandų Labai gera būklė

Būklė: geras (naudotas), Gamybos metai: 1998, CNC panardomosios erozijos staklės Gamintojas: INGERSOLL HANSEN Tipas: GRANTRY 1000 Metai: 1998 Valdymas: MITSUBISHI 64 Bit CNC multipuse Generatorius: 70 A Eigos: X 700 mm, Y 1350 mm, Z 500 mm Darbinis rezervuaras: 1000 mm x 1600 mm x 550 mm Dcjdpfx Aet Dbakekkjk Maksimali stalo apkrova: 3000 kg Aušinimo sistema, dokumentacija yra, duomenų saugojimas yra Priedai: Hirschmann įrankių laikiklis.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2010, INGERSOLL RAND šaldymo džiovintuvas Galingumas: 13 m³/min, Dcedpeiuk D Djfx Akkek Pagaminimo metai: 2010, Džiovintuvas visiškai veikiantis.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, tūrio srautas: 12,88 m³/val, INGERSOLL RAND R 75 N Screw Compressor NIRVANA VSD Variable speed drive (inverter controlled) Motor power: 75 kW Capacity: 12.88 m³/min Pressure: 10 bar Year of manufacture: 2014 The compressor is in full working condition. Dsdpew Dm Dwsfx Akksck

Būklė: labai geros būklės (naudotas), Gamybos metai: 2010, veikimo valandos: 50 000 h, greitas poslinkis X ašimi: 30 m/min, greitas poslinkis Y ašis: 30 m/min, greitasis eiga Z ašyje: 30 m/min, veleno greitis (maks.): 40 000 aps./min, 🔧 Technical Data Machine type: CNC milling machine Axes: 3 axes (X/Y/Z) Travel paths (X/Y/Z): 👉 approx. 550/400/400 mm (typical for this model, please confirm if required) Machine number: 655083 Year of manufacture: 2010 Power supply: 400 V / 3~ / 50 Hz Fuse: 63 A Power consumption: 32 kVA Machine weight: approx. 7,000 kg 🌬️ Extraction and filtration system (major advantage) Manufacturer: KELLER Lufttechnik Model: L-CUT-1-P3-B60-V Motor power: 3.3 kW Dcjdpfxjyxyz Sj Akkek Year of manufacture: 2010 👉 Integrated dust/fume extraction 👉 Significantly cleaner working environment 👉 Ideal for continuous use in tool and mold making 🧩 Features CNC control with operator panel 3-axis machining Compact and robust design Complete system including extraction unit Made in Germany 📦 Condition Machine from ongoing production Fully operational Well-maintained Inspection under power possible 🚛 Delivery Available at short notice Free loading onto truck 📌 Applications Mold making Electrode production Precision machining 📞 Note Further photos, videos and technical details available on request. Subject to prior sale.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2010, Šaldymo džiovintuvas INGERSOLL RAND TMS 80 Našumas: 8,2 m3/min Gamybos metai: 2010 Dsdsymmbtepfx Akkjck Džiovintuvas visiškai veikiantis.

Būklė: geras (naudotas), Gamybos metai: 2002, „Ingersol Rand Streamline Plus“ vandens srovės stiprintuvo siurblys. Dcsdpfxenp Iyws Akksk Geros būklės, tinkamai veikiantis.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 675002, X ašies eiga: 650 mm, Y ašies eiga: 1 100 mm, Z ašies eigos atstumas: 500 mm, Įranga: drožlių transporteris, TECHNINĖ INFORMACIJA X ašies eiga: 650 mm Y ašies eiga: 1 100 mm Z ašies eiga: 500 mm C ašies sukimasis: 360° ĮRENGINIO DUOMENYS Valdymas: CNC Matmenys ir svoris Matmenys (I x P x A): 3 500 x 1 800 x 2 800 mm Svoris be apkrovos: 13 000 kg ĮRANGA Drožlių transporteris Djdpfx Ajy Rxryjkkock Įrankių magazinas Jutiklis

Būklė: naudotas, Gamybos metai: 2003, Spalva: Pilka Tuščias svoris: 532 kg Matmenys (I x P x A): 120 x 90 x 110 cm - Ypatumai: - Aprašymas: Įskaitant džiovintuvą ir oro baką - Pagaminimo metai: 2003 - Dokumentacija prieinama: Ne - CE ženklinimas: Taip - CE sertifikatas: Ne - Serijos numeris: 2210711 - Transportavimo matmenys: 1200 mm x 900 mm x 1100 mm (i x p x a) - Transportavimo svoris [kg]: 532 kg - Transportavimo pakuočių skaičius [vnt.]: 3 Finansinė informacija PVM: Nurodyta kaina be PVM PVM / skirtumo apmokestinimas: PVM atskaitomas juridiniams asmenims Pristatymas ir keitimas galimi bet kokiai pramonės įrangai bet kuriuo metu Dcodpfx Akoyr Rnnekjk Yorick Diebels

Būklė: naudotas, TECHNICAL DATA - Number of axes: 5 Dcodjuhbtkepfx Akksk MILLING SPINDLE - Tool holder: HSK32 - Spindle drive power: 17 kW - Spindle speed: 30–42,000 rpm LINEAR AXES - Travel range X/Y/Z axes: 550/400/400 mm - Rapid traverse (X/Y/Z): 30 m/min SWIVEL AXIS A - Travel range: 120° (+/-) - Minimum resolution: 0.0001° SWIVEL AXIS B - Travel range: 360° - Minimum resolution: 0.0001° TOOL CHANGER - Tool changer type: Parapluie - Number of tools in magazine: 32 TABLE - Table size: 450 mm - Max. table load: 500 kg ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Required space: 1900 x 2580 mm - Machine height: 2260 mm - Machine weight: 7200 kg MACHINE HOURS - Power-on hours: 12,558 h - Operating hours: 6,602 h ACCESSORIES - Control: INGERSOLL ANDRONIC - Interface: Ethernet / RS232 / USB / PCMCIA - Teach-in programming - Electronic handwheel - Direct measuring systems - 3-color status lamp - Micro-spray unit - Spindle cooling - Tool probe system: BLUM

Būklė: labai geros būklės (naudotas), Gamybos metai: 2020, Ingersoll Rand D480IN-A Refrigerated-Lufttrockner Dodpfx Asrk Rp Ejkkeck Baujahr 2020, 1,73 kW, Kältemittel R407C-1, Umgebungstemperatur +2 bis +50°C, 1-phasig

Būklė: geras (naudotas), Gamybos metai: 2011, Ingersoll Rand D480IN-A Šaldytuvo tipo oro džiovintuvas 2011 m., 1,73 kW, šaltnešis R407C-1, aplinkos temperatūra +2/50 °C, 1 fazė Dcjdpferk Rqbjx Akkek

Būklė: Defektas atsarginių dalių laikiklis (naudotas), Gamybos metai: 2004, Funkcionalumas: neveikiantis, X ašies eiga: 800 mm, Y ašies eiga: 700 mm, Z ašies eigos atstumas: 500 mm, For sale are spare parts for a 3-axis CNC machining center, brand Ingersoll, model OPS 800. Ideal for the production of graphite electrodes thanks to the installed high-speed spindle. The machine has been dismantled and individual components such as the control system, extraction unit, spindle, and operating panel are available for sale. Let us know which parts you need and we will provide you with a customized offer. Technical data: Year of manufacture: 2004 X-axis travel: 800 mm Y-axis travel: 700 mm Z-axis travel: 500 mm Control: ANDRON Spindle speed: 42,000 rpm Tool changer: 36 positions Tool holder: HSK 63 Including: Graphite extraction unit Chip trays Cooling system Tools not included Dodpfxouu Rths Akkock Transport and loading can be organized Europe-wide at an additional cost, upon request. Prices are subject to VAT. Inspection possible by appointment. Contact us – our team looks forward to assisting you. Trade-in or exchange is possible! Machinery purchase and sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or contact options, please visit our website.

Būklė: naudotas, Įranga: suodžių filtras,

Būklė: labai geros būklės (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, OPS INGERSOLL GANTRY EAGLE 800 Pagaminimo metai: 2022 Puiki būklė, mažai naudota EAGLE Powertec PC/NC valdymo sistema 3060 22 colių ekranas su lietimui jautriu valdymu Dcedeyzxd Djpfx Akkjk MultiProg Powertec technologijų programavimas per PC/NC Powertec Easy Burn greitas programavimas Powertec Handheld – daugiafunkcinis rankinis valdymo įrenginys Rankinis erodavimas naudojant Powertec Handheld EAGLE Powertec tikslus apdailos generatorius PT 60, 60 amperų (60 amperų smailės srovė) Didelio greičio šuolis max. 18 000 mm/min Eigos (X, Y, Z): 550 x 850 x 450 mm Visose ašyse įrengta linijinė matavimo sistema Atstumas nuo stalo iki elektrodų laikiklio: min. 135 mm, maks. 585 mm 20 vietų elektrodų keitiklis, rotacinė diskinė talpykla Darbinis rezervuaras (plotis x gylis x aukštis): 800 x 1 100 x 480 mm Darbinis stalas (plotis x gylis): 760 x 1 000 mm Keliamoji galia: 2 000 kg Galvos apkrova: 200 kg Įrenginio matmenys (plotis x gylis x aukštis): 1 436 x 2 940 x 2 730 mm Integruota kasetinė filtravimo sistema Priedai: Erowa, UPC Production Chuck CO2 gesinimo sistema Atvėsinimo įrenginys

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 525 mm, Y ašies eiga: 400 mm, Z ašies eigos atstumas: 450 mm, ruošinio svoris (maks.): 1 000 kg, ruošinio aukštis (maks.): 375 mm, Completely Refurbished OPS Ingersoll Gantry 500 Eagle Die-Sinking EDM Machine – In Excellent Technical and Visual Condition The machine has undergone a comprehensive and professional overhaul at our facility and is in excellent technical and visual condition. During the refurbishment process, more than 70% of the machine was disassembled. All critical wear parts were carefully inspected and replaced as necessary, including ball bearings and drive spindles. Subsequently, the machine underwent a complete geometric measurement, alignment, and additional inspection using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were dismantled, cleaned, and overhauled. All hoses—including hydraulic and compressed air hoses—were fully replaced. Additionally, the machine was completely repainted and now presents itself in a very well-maintained visual condition. The generator and control unit were cleaned and technically inspected. The generator’s climate control unit was also cleaned to ensure reliable cooling and stable operation. Finally, the machine underwent comprehensive EDM testing according to the quality and inspection standards set by OPS Ingersoll. The machine is immediately ready for operation and is ideally suited for dependable production use. Technical Specifications: - Ingersoll (OPS Ingersoll) - Die-Sinking EDM Machine - OPS INGERSOLL GANTRY EAGLE 500 - Year of Manufacture: 2009 - Control System: EAGLE Powertec PC/NC 2060 - MultiProg Powertec technology programming on PC/NC - Powertec Easy Burn quick programming - Powertec Handheld – multifunctional handheld control unit - Manual EDM operation with Powertec Handheld - High speed jump, max. 18 m/min - Generator output: 60 Amperes, EAGLE Powertec - Travel distances (X, Y, Z): 525 x 400 x 450 mm - Electrode changer: 20-position pick-up disc changer - Work tank (W x D x H): 770 x 670 x 440 mm - Worktable (W x D): 750 x 650 mm - Load capacity: 1,000 kg Accessories: - CO2 fire extinguishing system - Integrated cartridge filter system Dcodpfx Aksyzw I Iekek Special Equipment: - Linear measuring system on all axes (Z-axis standard)

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, Valdymas: Multipulse 64 4 ašys – įskaitant C ašį Darbinė sritis: 600 x 500 x 340 mm Galvos eiga: 400 x 300 x 300 mm Stalo apkrova: 500 kg 20 pozicijų elektrodų keitiklis Dedpfoyllaxex Akkjck Erowa elektrodų tvirtinimo sistema Dokumentacija. Staklės šiuo metu dar veikia ir buvo kapitaliai suremontuotos prieš keletą metų. Staklių dielektrinis aušintuvas maitinamas iš centrinės aušinimo sistemos.

Gamybos metai: 2009, būklė: naudotas, Ingersoll Rand TS1100W Air Dryer Manufacturer Ingersoll Rand (manufactured by Parker Hiross S.p.A, Italy) Type Refrigeration air dryer – industrial version Industrial applications • Compressed air treatment in pneumatic systems • Industrial applications requiring dry air: machining, painting, automation, etc. • Protection of equipment sensitive to humidity Key technical features: • Model: TS1100W • Serial number: 3733790002 • Cooling: water-cooled • Refrigerant: R407C • Max. low side pressure: 1.9 MPa (275 psi) • Max. high side pressure: 2.8 MPa (406 psi) • Circuit pressure: 2.6 MPa (378 psi) • Min./max. air pressure: 4 bar / 14.5 bar Dcedpfx Aksxggmnokjk • Max. air temperature: 60 °C • Ambient temperature: 5 °C to 50 °C • Power supply: 400V – 3 Ph – 50 Hz • Power consumption: 15.6 kW / 27.8 A • Protection rating: IP44 • Oil carryover: ≤ 0.01 mg/m³ (with suitable pre-filtration) • Approximate dimensions: 1450 mm width • Approximate weight: approx. 650 kg • Year of manufacture: February 2009 🧩 Machine operation The Ingersoll Rand TS1100W industrial air dryer is designed to remove moisture from compressed air in production facilities. It protects pneumatic lines, automated equipment, and humidity-sensitive processes, ensuring reliability and long service life for equipment. ⚙️ Special features / Differences The TS1100W stands out for its water-cooling feature, ideal for industrial environments with a high thermal load. It supports high air pressures (up to 14.5 bar), and its R407C refrigerant complies with modern environmental standards. Its robust design offers reliable continuous use under demanding conditions.

Būklė: naudotas, Gamybos metai: 2015, 20 ft sea container equipped with a screw compressor installation featuring 2 Ingersoll Rand R30I-A10 screw compressors, each with a capacity of 30 kW. Dcedpfx Akewbf U Noksk

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 550 mm, Y ašies eiga: 850 mm, Z ašies eigos atstumas: 450 mm, valdiklio modelis: CNC MITSUBISHI 32bit, TECHNICAL DETAILS Travel X-axis: 550 mm Travel Y-axis: 850 mm Travel Z-axis: 450 mm Y-axis travel for electrode change and loading position: 1,180 mm Integrated C-axis head, adjustable rotation speed: 10/20 rpm Integrated C-axis head measurement resolution: 0.001 mm Table dimensions: 850 x 550 mm Load capacity without changer: 50 kg Load capacity with changer: 10 kg Head load min.: 200 kg Distance from tool carrier plate to worktable max.: 585 mm Distance from tool carrier plate to worktable min.: 125 mm MACHINE DETAILS Control: CNC MITSUBISHI 32bit Tank dimensions (W x D x H): 800 x 1,100 x 480 mm Dielectric height programmable/automatic: 440 mm Filter cartridge version: Integrated cartridges Electrode changing system / pick-up disc magazine positions: 20 Electrode weight / single electrode: 15 kg Changer total: 60 kg Generator FP70: Ampere multipulse Electrode changer: 20-position pick-up linear changer Current: 70 A Dimensions & Weight Space requirement: approx. 2.4 x 2.65 x 2.68 m Dedpfx Aeywguvjkkjck Machine weight: approx. 6,000 kg EQUIPMENT Electric hand pendant Integrated CO₂ fire extinguishing system / dielectric cartridge filter system

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 525 mm, Y ašies eiga: 400 mm, Z ašies eigos atstumas: 450 mm, stalo plotis: 750 mm, stalo ilgis: 650 mm, TECHNICAL DETAILS Design: Lifting tank Internal dimensions (W x D x H): 770 x 670 x 440 mm Dielectric height programmable/automatic: max. 395 mm Work Table Support surface (W x D): 750 x 650 mm Load capacity: 1,000 kg Travel Distances Dcsdpfx Akow T Tg Noksk X / Y / Z (within work tank): 525 x 400 x 450 mm Y (for electrode change and loading position): 675 mm Control PC-NC dialogue: 2 x 32 bit Drive type: digital AC servo motors Max. traverse speed X, Y, Z: 5,000 mm/min High speed jump max.: 18,000 mm/min Min. distance electrode clamping system to work table: 135 mm Max. distance electrode clamping system to work table: 585 mm C-Axis Adjustable rotational speed: 1–20 rpm Measuring resolution: 0.001 degree Load capacity for manual electrode change: 50 kg Load capacity for automatic electrode change: 15 kg Holding torque/clamping: Yes Max. electrode moment of inertia: 0.4 kgm² MACHINE DETAILS Dimensions (W x H x D) with generator: 2600 x 2680 x 2290 mm Required space with generator: 7.3 m² Machine weight: 4,360 kg Generator weight: 640 kg Connected load: 16 kVA Fuse protection: 32 A Rated voltage/frequency: 400 V / 50 Hz Operating hours: 2,001 h

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 575650, X ašies eiga: 550 mm, Y ašies eiga: 850 mm, Z ašies eigos atstumas: 450 mm, TECHNICAL DETAILS Version: Tank with lifting function Internal dimensions (W x D x H): 800 x 1100 x 480 mm Programmable/automatic dielectric fluid height: max. 450 mm WORKING HEAD At ram clamping system UPC/H8000/Dynafix: 150 kg Min. distance electrode clamping system to worktable: 135 mm Max. distance electrode clamping system to worktable: 585 mm INTEGRATED C-AXIS Adjustable rotational speed: 1 - 20 rpm Measuring resolution: 0.001 degree Load capacity (manual electrode change): 50 kg Load capacity (automatic electrode change): 15 kg Holding/clamping torque: 120 Nm Max. moment of inertia of electrode: 0.4 kgm² WORKTABLE Support surface (W x D): 760 x 1000 mm Load capacity: 2,000 kg Dcsdpfx Aksw T Thmskek TRAVEL PATHS X / Y / Z (within working tank): 550 x 850 x 450 mm Y (for electrode change and loading position): 1180 mm CONTROL PC-NC dialogue: 2 x 32 bit Drive type: digital AC servo motors Max. travel speed X, Y, Z: 5,000 mm/min High speed jump max.: 18,000 mm/min MACHINE DETAILS Main voltage: 400 V / 50 Hz Control voltage: 24 VDC Maximum fuse: 32 A Power consumption: 19 kVA Machine weight: 6,400 kg Main dimensions (W x H x D) with generator: 2760 x 2730 x 2940 mm Space required with generator: 9 m² Generator weight: 640 kg Operating hours: 3,221 h

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, X ašies eiga: 525 mm, Y ašies eiga: 400 mm, Z ašies eigos atstumas: 450 mm, stalo plotis: 650 mm, For sale: 2 EDM machines by OPS Ingersoll, model Gentry Eagle 500 The machines are being sold directly from a production facility, are in excellent condition, and fully operational. Technical specifications: Year of manufacture: 2009 Operating hours: approx. 30,758 Available from: by arrangement Travel distances: X-axis: 525 mm Y-axis: 400 mm Z-axis: 450 mm (430 mm up to Erowa) C-axis: CNC-controlled (0.001 mm resolution) Electrode holder (quill): Erowa ITS Work tank: 770 mm x 670 mm x 440 mm Table size: 750 mm x 650 mm Accuracy: 0.005 mm – 0.015 mm Max. dielectric height: 395 mm Max. pallet size: 750 x 950 x 420 mm Max. workpiece weight: 1,000 kg Max. electrode weight: 100 / 50 / 15 kg Max. throat depth: 585 mm Equipment: - 16 m² filter system with paper candle - Compressor recooling unit - Lowerable lift tank with automatic tank top-up (ATA) - CO₂ fire extinguishing system Machine weight: 3,640 kg (incl. generator and control panel) Operating weight: 6,450 kg (ready for operation) Installation dimensions: 3,135 x 3,944 x 2,871 mm Options: - Pallet carrier 4x Power-Grip160 (not included in the price) - Various change pallets 4x aluminium with chip - Various Erowa ITS electrode holders with chip Transport and loading can be organised across Europe on request for an additional charge. Prices are quoted plus VAT. Inspection by appointment possible. Contact us – our team will be pleased to assist you. Trade-in or exchange possible! Dedexrpm Uspfx Akkjck Machinery Trading & Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY ETC. Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, please visit our website.