Ima pirkti naudotą (123)

Gamybos metai: 2001, Sąlyga: geras (naudotas), IMA Gluing Unit Spare part for e.g. IMA 680 / 480 / 980 Edge banding unit for 4-sided and all-around edge banding on butt joints, featuring: - Main pressure roller, diameter 100 mm, and pneumatically controlled follow-up pressure roller, diameter 35 mm - Glue application system for coating the edge material, with temperature and level control - Servo drive for edge transport with automatic adaptation to feed speed - Hot air post-activation unit, 7.5 kW, on glue side - IR emitter 600 Watt on decorative side to prevent deformation of material on small radii - Pneumatically driven crosscut saw - Butt joint edge detection - NC axis Rotation range up to 740 degrees, pneumatic Z-stroke 125 mm Todsbxx Ikepfx Ag Ref - Separate NC axis in Y (for portal also in X), operates independently from main axis Year of manufacture: 2001, removed from IMA 680 V No. 2216 Scope of delivery as shown Please check compatibility with your machine. No returns accepted. The unit was in production use for approx. 2 years and is considered to be in good condition. Technical specifications subject to change.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, Edge banding machine Manufacturer: IMA Model: Quadromat 3512 U Year of manufacture: 1999 Edge materials: veneer rolls and strips, plastic, solid wood lippings Todpfx Agjv T R Ere Rjf Edge height: 14–50 mm Edge thickness: 0.4–12 mm Spindle speed: 18,000 rpm End trimming unit Milling units Profile scrapers Polishing unit Flat scrapers

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2019, Maszyna etykietująca IMA AP400 w niemal idealnym stanie. Mało używana, w dobrym stanie technicznym. Model AP400 umożliwia kontrolę i odrzucanie nieprawidłowych etykiet oraz może być monitorowany i sterowany za pośrednictwem panelu operatorskiego HMI. Dostępna bezpośrednio do zakupu. Tjdpjv Up Eajfx Ag Ref

Sąlyga: naudotas, Imatronic Numerical Control with ImaWop 8.0 software (software updated in 2020). Working area on X-axis: 7000 mm. Working area on Y-axis: 1400 mm. Full table with support plate for positioning suction cups; suction cups can be manually positioned using a laser indicator on the work surface. No. 2 vertical electrospindles with C-axis and automatic tool change. Automatic tool changer with 18 positions located on the rear of the machine. Drilling head with 21 spindles arranged as follows: * No. 11 vertical on the X-axis * No. 10 vertical on the Y-axis. Edge banding unit with glue pot and pre-melter for EVA glue (glue pot new in 2023). Nordson premelting unit for PUR adhesive on folding panels. No. 1 cutting unit (end trim saw). No. 1 milling unit. No. 1 cross unit with 4 horizontal drilling lines. No. 1 blower unit. Edge storage unit with 2 positions. Carpeted front guard and safety system. Full safety enclosure (not original IMA). TECHNICAL DETAILS MUST BE VERIFIED. Tjdsw El Nhopfx Ag Rsf

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 005854, Naudojamo krašto tipas: plonas kraštas, storas kraštas Klijų sistema: EVA Daugiafunkcis agregatas: taip Tedpfx Aov Hinxog Ref Briaunų klijavimo staklės: 1 ir 2 staklės Maks. plokštės plotis: 3300 mm Maks. padavimo greitis: 30 m/min Darbo agregatai, dešinėje pusėje: 11 vnt. Darbo agregatai, kairėje pusėje: 11 vnt.

Gamybos metai: 1999, Sąlyga: paruoštas naudoti (naudotas), Allgemeine Daten Maschinengewicht: 5.000 kg Steuerung Hersteller: SIEMENS Hauptantrieb Spindeldrehzahlbereich: 6.000 – 9.000 U/min Spindelmotorleistung: 12 kW Anzahl der Achsen: 3 Verfahrwege X-Achse Verfahrweg: 3.000 mm X-Achse Eilgang: 50 m/min Y-Achse Verfahrweg: 1.000 mm Y-Achse Eilgang: 50 m/min Z-Achse Eilgang: 25 m/min Werkzeuge Max. Werkzeuggewicht: 6 kg Max. Werkzeugdurchmesser: 150 mm Werkzeugaufnahme: HSK F63 Zusätzliche Ausstattung 1 vertikales Bohraggregat in Y-Richtung 1 vertikales Bohraggregat in X-Richtung 1 Hauptspindel mit programmierbarer Drehrichtung 1 zentral integrierte CNC-Achse, 360° drehbar 1 Adaptereinheit Säge, feststehend bei 90° Sägeblattdurchmesser: 200 mm 1 Adaptereinheit horizontales Bohr- und Fräskopf (Kreuzkopf) 1 Adaptereinheit horizontaler Fräser (Planscheibenfräsen) 2x Adaptereinheiten für Topfbandscharniere Inklusive 1 neue Siemens Vakuumpumpe + umfangreiches Zubehör Diese 3-Achs-CNC-Holzbearbeitungszentrum IMA BIMA 310 120/300 wurde im Jahr 1999 gebaut. Wenn Sie auf der Suche nach hochwertigen Holzbearbeitungslösungen sind, sollten Sie die zum Verkauf stehende IMA BIMA 310 120/300 in Betracht ziehen. Kontaktieren Sie uns für weitere Informationen. Tjdpfx Agjv Nb Dqj Rjf Anwendungsbereiche CNC-Holzbearbeitung

Sąlyga: geras (naudotas), Gamybos metai: 2001, Hand edge banding device IMA HKA contour edge banding machine Tjdsv N Nn Depfx Ag Rjf The IMA HKA hand edge banding device is a versatile tool for manually applying edge strips or veneer strips to panel-shaped workpieces. It is suitable for materials such as chipboard, blockboard, and MDF. The device can be used both manually and in combination with a processing table, offering high flexibility in application. Year of manufacture: 2001. If you require vacuum clamps, you can purchase new or used ones in our shop. The HKA consists of two main components: 1. Hand tool: Automatically feeds the edge strip, applies adhesive, and presses it onto the workpiece. 2. Processing table: Includes a vacuum pump, temperature controller, and various control elements. The hand tool can be suspended from a cable hoist to facilitate operation. Operation methods: • Guided workpiece: The hand tool is mounted on the processing table and the workpiece is moved manually. • Guided hand tool: The workpiece is fixed with vacuum suction pads while the hand tool is guided. Technical data: • Working width: 90 mm • Edge thickness: 0.4 - 3 mm • Panel thickness: 16 - 45 mm • Strip feed: 20 - 50 mm • Power consumption: 2.6 kW • Vacuum pump 6 cbm/h • Minimum external radius: Dependent on the bending suitability of the edge material • Minimum internal radius: 150 mm, depending on material property Additional equipment: • Boom for installing a spring balancer • Vacuum clamping table

Gamybos metai: 1991, veikimo valandos: 13 h, Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Corazza/IMA MD120 Portionenpacker. Maschine zum Dosieren und Verpacken von Mini-Portionen Butter und Bouillonwürfeln in rechteckigen Packungen. - Leistung: 5.400 St./h bis 7.200 St./h - Aktuelles Packmaß: 31x23x11 mm → Umrüstung auf andere Packungsgrößen möglich - Baujahr: 1991 - Werksüberholung durch IMA 2016, seither nur 13 Betriebsstunden gelaufen - Papierzufuhr und -positionierung über Lichtschranke gesteuert - Butterzufuhr mittels Edelstahltrichter mit korrosionsbeständiger Förderschnecke - Komplett eingehaust mit Lexan-Türen und -Fenstern (gemäß EG-Richtlinien) Tjdpfx Agjwfn Adj Ref - Inklusive Dokumentation und EG-Konformitätserklärung - Eine vollautomatische Sammel- und Stapelvorrichtung für mehrlagige Konfiguration kann ergänzt werden - Diese Maschine entspricht im Wesentlichen der Benhil 8304 Zustand: wie neu Bitte kontaktieren Sie uns für weitere Informationen. Die Maschine kann nach Terminvereinbarung besichtigt werden.

Sąlyga: geras (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 08420, bendras ilgis: 11 500 mm, briaunos storis (maks.): 3 mm, bendras svoris: 8 500 kg, suslėgto oro jungtis: 7 juosta, Used single-sided IMA edge banding machine for straight edges; designed for jointing, gluing, and post-processing of various edge materials. Fixed fence side on the right. Workpiece and material dimensions: - Min. workpiece length: 150 mm - Min. workpiece width: 65 mm - Min. workpiece thickness: 8 mm - Max. workpiece thickness: 40 mm (with corner rounding/copying) - Max. workpiece thickness: 60 mm (without corner rounding/copying) - Smallest workpiece: 150 x 150 mm or 300 x 65 mm - Workpiece overhang: 38 mm - Edge thickness min/max: 0.3 – 3.0 mm - Edge width min/max: 14 – 65 mm EQUIPMENT / SPECIFICATION - Base machine - Workpiece transport with 80 mm wide feed chain (chain plate width) - Feed rate 6 to 30 m/min, infinitely variable via control unit - Top pressure with spring-loaded guide rollers and 70 mm wide composite V-belts - Automatic height adjustment (workpiece thickness) - Workpiece support with extendable roller rails, up to approx. 600 mm - IMA 63.152 feed table, 500 x 500 mm, for safe and square feeding of long and narrow parts - Manual infeed device, pivotable up and down, with 5 driven inclined rollers from above - Adjustable infeed fence with NC axis UNITS / EQUIPMENT - JOINTING UNIT IMA 08.378, 2 motors each 4.5 kW, with engagement control, tool Ø 125 mm, electronic horizontal positioning - GLUING SECTION 04.1570 Concept, driven glue roller with auto-stop in case of malfunction, quick-lock system for glue application unit, glue roller lift at feed stop, edge infeed control via fiber optics, hold-down with stepper motor adjustment - Automatic PUR melting system IMA 283.203 - Edge magazine with automatic 6-roll changer POST-PROCESSING SECTION - End trimming unit IMA 08.42, horizontal working movement, 2 motors each 0.65 kW, 200 Hz, for straight and bevel trimming, max. working speed 30 m/min - Fine trimming unit IMA 08.055, 0.66 kW 400V 200Hz, top/bottom, HSK 25 - Corner rounding (copying IMA) 08.348, 2 motors 0.66 kW 400V 200 Hz, HSK 25, max. working speed 20 m/min - Profile (radius) scraper 08.516, top/bottom, for multi-profile tools, automatic positioning via stepper motors. Up to 4 profiles, electro-pneumatic in/out engagement. - Spray unit for cleaning agent - Flat scraper 08.521 (glue joint), top/bottom - Profile (corner) buffing unit 08.604, 4 motors - Buffing unit 08.617, top/bottom CONTROL / SOFTWARE: • Control system ICOS Open Compact • Edge tracking control • Uninterruptible power supply (UPS) • Power supply 400 V, 50/60 Hz, control voltage 24 VDC / 230 VAC Tjdpfxjwyp Nuj Ag Ref Machine dimensions L 1150 x W 300 x H 260 cm Availability: Approx. October 2025

Sąlyga: labai geros būklės (naudotas), 5-Axis (X-Y-Z-C+ 5°) CNC MACHINING CENTER (POINT-TO-POINT) CNC machining center for milling, drilling, cutting, and edge banding ICOS CNC control unit (IMAWOP software) Maximum working area (X - Y - Z) mm: 4000 x 1600 (2000) x 100 (Z travel path mm 650) Maximum working area (X - Y - Z) during edge banding (mm): 4000 x 1600 x 100 Todpfew A Ruqjx Ag Rsf No. 8 clamping tables with consoles (number of consoles) – mm 1400 LED positioning guides for vacuum suction cups (positioning along the Y-axis) No. 2 vacuum pumps (capacity 140 m³/h) Safety cabin for machining head, safety tread mats Chip conveyor No. 1 vertical main spindle (milling unit) ROBOT HEAD HSK F63 (16 kW) Automatic tool changer (carousel type), No. 18 tool positions No. 21 independent vertical drilling spindles (4 x 1.2 kW) No. 8 independent horizontal drilling spindles (4 in X + 4 in Y) Grooving saw unit (swivels 90° in X-Y direction), diameter (mm) 200 Edge banding unit (PUR glue + Pre-melter 283.203) VT 100 / 100 WITH 45° SWIVELLING EDGE BANDING UNIT No. 2 edge magazine for rolls OPTIONS: No. 1 adapter unit for flush or chamfer milling No. 1 adapter unit for flush milling and profile scraper

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 006561, Uždedamos briaunos tipas: plona briauna, stora briauna, masyvi mediena Klijavimo sistema: EVA Tsdjqa Rxaopfx Ag Rsf Briaunų klijavimo staklės: Mašina 1 Didžiausias plokštės plotis: 2800 mm Darbo agregatai, dešinė pusė: 11 vnt. Darbo agregatai, kairė pusė: 11 vnt.

Sąlyga: labai geros būklės (naudotas), Double-sided solo machine (or 1st and/or 2nd machine in a production line) Roll material (edge) thickness (min/max) mm: 0.3 / 3 Edge thickness for strips / bands (min/max) max mm: 1.0 Tsdpfx Ajwz Ic Asg Rof Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 (266) / 3300 Control / Software: ICOS Open (Windows-based) Feed speed (adjustable) m/min: 10 - 50 Protective and soundproof cabins FORMAT PROCESSING (for each side): Pre-milling cutter (pre-milling): 75.186 (1 x 4.4 kW) Milling unit (2 x 6.6 kW) + free position EDGE BANDING SECTION (for each side): Pre-heating unit for edge heating Glue application unit (hot melt adhesive): 04.1570 Pressure zone + edge magazine for rolls (compartment no.): 2 End trimming unit: 08.42 (2 x 0.66 kW) 30 m/min (0°-25°) Pre-milling unit: 08.0555 (1 x 0.66 kW) Multifunctional unit (radius and profile milling unit): MFA 08.342 (2 x 0.66 kW) SERVO Max 20m/min Profile scraper unit: 08.519 Flat scraper unit: 08.50 Spray unit (for polishing fluid) Buffing unit: 08.617-2 (2 x 0.18 kW) Universal milling unit for grooving/rebating and profiling: 75.30 (2 x 4.4 kW)

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 005657, Pridedamos briaunos tipas: plona briauna, stora briauna Klijavimo sistema: PUR Sujungimo frezavimas: taip Multifunkcinis agregatas: taip Viršutinis frezavimo agregatas: taip Tsdpfx Agswcx Tus Ref Maks. tiekimo greitis: 30 m/min Maks. plokštės storis: 60 mm Darbo agregatai: 13 vnt.

Sąlyga: labai geros būklės (naudotas), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness with veneer strips (min/max) mm: 3 / 10 Panel thickness (min/max) mm: 8 / 60 Working width (min/max) mm: 236 / 3300 Control/Software: ICOS Open Feed speed (m/min): 10 - 50, without transmission bar (Master & Slave systems) Stop cams retractable, distance (mm): 1080 FORMAT PROCESSING (per side): Tedpsd Nt Rqofx Ag Ref Protective cutter (pre-milling) 75.186 (1 x kW 4.4) Chipping unit (2 x kW 8) Jointing milling unit 08.376 (1 x kW ?) EDGE BANDING SECTION (per side): Gluing unit (hot melt adhesive) 283.1513 04.1570 + 283.205 Edge pressure zone – edge magazine for rolls (compartment no. 6) End trimming unit 08.42 (2 x kW 0.66) 30 m/min (0°-25°) Milling unit 08.055 (2 x kW 1) 0° - 30° Multifunctional unit (radius milling and contour milling unit) 08.342 (2 x kW 0.66) servomotors Profile scraper unit 08.519 Flat scraper unit 08.521 Sprayer unit (for polishing fluid) Buffing unit 08.617-4 (4 x kW 0.18) Universal milling unit for grooving/rebating and profiling 08.190 (1 x kW 4.5) 90°-180°-270°

Sąlyga: visiškai atnaujintas (naudotas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 - 3 Edge thickness in strips (min/max) mm 3.0 - 12.0 Panel thickness (min/max) mm 8 - 60 Todpfx Agjdfgfpe Rof Control ICOS Feed speed m/min 16 Top pressure powered by V-belt Sprayer unit (for liquid non-stick agent) Jointing milling unit 08.376 (2 x 3.0 kW) Lamps for panel side heating Gluing unit (hot melt glue) 283.1513 Edge pressure zone Edge magazine for rolls (compartment No.) 1 End trimming unit 08.415 (2 x 0.66 kW) Milling unit 08.055 (2 x 1 kW) - 30° Multifunctional unit (radius milling and profile routing) 08.346 (2 x 0.66 kW) Profile scraper unit 08.519 Flat scraper unit 08.50 Sprayer unit (for polishing liquid) Buffing unit 08.612 (2 x 0.25 kW) Free space

Sąlyga: dilaminuotas dirbtuvėje (naudotas), DOUBLE-SIDED SQUARING AND EDGE BANDING MACHINE – 1st machine in line Edge thickness in rolls (min/max): 0.3 / 3 mm Panel thickness (min/max): 8 / 45 mm Working width (min/max): 236 / 1300 mm Control/Software: ICOS Open Feed speed (adjustable): 10 / 50 m/min No transmission bar (Master & Slave systems) Safety and noise protection cabin SQUARING SECTION (per side): Spray unit (for liquid release agent) Interchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free position EDGE BANDING SECTION (per side): Gluing unit (Hot Melt + premelter) 04.1570 Pressure zone for edging Edgeband magazine for rolls (compartment no.): 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Flush trimming unit 08.517 Tsdpfx Aodh Tfgeg Rjf Spray unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free position

Sąlyga: labai geros būklės (naudotas), Double-sided solo machine (or 1st and/or 2nd machine in a production line) Edge thickness, roll material (min/max) mm: 0.3 / 3 Edge thickness, strips / solid wood mm: 1.3 Panel thickness (min/max) mm: 8 / 40 Working width (min/max) mm: 266 / 2400 (option 3000) Cam spacing (mm): 540 (prepared for 270 mm) Control system: ICOS OPEN Feed speed m/min (variable): up to 60 m/min No transmission bar (Master & Slave systems) FORMAT PROCESSING (for each side): Sprayer unit (for liquid anti-stick agent) Jointing cutter unit 08.376 (4.5 kW x2) Todpfx Agsu Ekbns Ref Free space EDGE BANDING (for each side): Gluing unit (hot melt glue) 283.205 Edge pressure zone, edge magazine for rolls (dual) End trimming unit 08.42 (0.2 kW x2) 0°–25° (max. working speed 50 m/min, servo motor) Milling unit 08.055 (0.66 kW x2) 0°–30° Multifunction unit (radius milling & profile trimming unit) 08.342 (0.66 kW x2) Sprayer unit (for polishing agent) Free space (for optional addition of a scraper) Buffing unit 08.617 (0.18 kW x2)

Sąlyga: visiškai atnaujintas (naudotas), Single-Sided Edgebanding and Edge Processing Machine (Left) Edgeband Material (Roll) Thickness (min/max) mm: 0.3 - 3 Edgeband Thickness for Strips/Slats (min/max) mm: 1 ALU Panel Thickness (min/max) mm: 6 - 55 Control/Software: IMATRONIC 121 /01 Feed Speed (adjustable) m/min: 6 - 30 FORMATTING PROCESSING: Jointing Cutter Unit with CNC Control 08.376 (2 x 4.5 kW) Sprayer Unit (for liquid release agent) EDGEBANDING SECTION: Lamps for edge heating of workpieces Gluing Unit (PUR glue + pre-melter) 04.1569 Edge Pressure Zone mm: 1000 + edgeband magazine for rolls (compartment No. 6) End Trimming Unit 08.42 (2 x 0.66 kW) Working Speed 25 m/min (0–25°) Pre-Milling Unit 08.0555 (2 x 1 kW) Milling Unit 08.055 (2 x 1 kW) 0°–30° + Sprayer Unit (for sliding fluid) Tsdpfx Aocr T N Dog Rof Contour Milling Unit (for fine trimming) CNC Controlled 08.348 (2 x 0.66 kW) Multi-Profile Scraper Unit (CNC controlled) 08.516 Flat Scraper Unit 08.517 (Pneumatic) + Sprayer Unit (for polishing fluid) Buffing Unit 08.614 (2 x 0.25 kW) Universal Milling Unit for Grooving, Rebating and Profiling 08.183 (1 x 3 kW) Smoothing Unit 08.53 Radius Sanding Unit for Straight Edges WI (4 x 0.75 kW)

Sąlyga: labai geros būklės (naudotas), Double-sided single machine (or 1st and/or 2nd machine in a production line) Roll material (edges) thickness (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 / 1300 Control/software: ICOS Open (Windows-based) Without transfer rail (master & slave systems) Feed speed (adjustable) m/min: 10 - 50 Protective and soundproof cabins "Hopper" (the panels fall directly onto the motorized track chains) Cam pitch (mm): 270 FORMATTING (for each side): Spraying unit (for liquid non-stick agent) Protection cutter (pre-milling) 75.186 (1 x 4.4 kW) Todpfx Asum Unteg Rof Milling unit (2 x 6.6 kW) Free space EDGE PROCESSING (for each side): Gluing unit (hot melt glue + pre-melter) 04.1570 + 283.201 Pressure zone + edge magazine for rolls (compartment no.) 6 End trimming unit 08.42 (2 x 0.66 kW) 30 m/min (0°-25°) Milling unit 08.055 (2 x 0.66 kW) 30 m/min Flat scraper unit 08.521 Spraying unit (for polishing fluid) Buffing unit 08.617-2 (2 x 0.18 kW) Free space

Sąlyga: labai geros būklės (naudotas), 5-axis (X-Y-Z-C-5) CNC machining center for milling, drilling, cutting, and edge banding. Gantry construction with safety foot mats. PC control type ICOS OPEN CNC – IMAWOP software. Work tables with console design (No. 8 console tables x 1400 mm). Todpfx Aohu U Nxog Rsf Console table with LED/diode light strip. Automatic tool changer system (magazine slots – No. 18 slots). Usable working area (X-Y-Z): 4000 x 2100 x 300 mm. Usable working area (X-Y-Z) for edge banding: 4000 x 1800 x 60 mm. No. 2 working zones. Vacuum pump / capacity (m³/h): 140. Chip conveyor. With separate electrical and control cabinet. Total connected load (kW): 32. Machining units (upper): No. 21 independent vertical drilling spindles (4 x 1.2 kW). No. 1 main vertical spindle (milling unit) HSK 63 ROBOT (16 kW). Edge banding unit, glue applicator (hot melt glue) VT 100. Edgebanding material (rolls) thickness (min/max): 0.4 / 3 mm. Roll edge magazine (No. 2 compartments). OPTIONS: Saw unit, max diameter 200 mm. Combination unit (flush milling/profiling scraper). Drilling head (with No. 4 horizontal drilling spindles).

Sąlyga: labai geros būklės (naudotas), DOUBLE-SIDED EDGE BANDING AND FORMATTING MACHINE – First (1st) machine in a line Edge thickness in coil (min/max) mm: 0.3 / 3 Coil material (edge) thickness (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 / 1300 Control/Software: ICOS Open (Windows-based) Feed speed (adjustable) m/min: 10 - 50 Safety and soundproof cabins FORMATTING OPERATIONS (per side): Milling unit 75.30 (2 x kW 6.6) Tsdounrwnopfx Ag Rsf Free station EDGE BANDING OPERATIONS (per side): Gluing unit (Hot Melt adhesive + premelter) 04.1570 + 283.201 Pressure zone Edge magazine for coils (compartment no.): 6 Pre-milling unit 08.055 (2 x kW 1) 0°-30° Milling unit 08.055 (2 x kW 0.66) 0°-30° Profile scraper unit 08.515 Free station Buffing unit 08.617-2 (2 x kW 0.18) No. 2 universal milling units for grooving/rabbetting and profiling DX: 75.30 (2 x kW 4.4) 90°-180°

Sąlyga: labai geros būklės (naudotas), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm 0.4 / 3 Tjdpfjfi Tkvex Ag Rjf Edge thickness in pre-cut veneer strips (max) mm 1.3 Panel thickness (min/max) mm 10 / 45 Working width (min/max) mm 244 / 2300 approx. Control / Software: ICOS Open Feed speed (m/min) 8 - 40 No transmission shafts (Master & Slave systems) Safety and sound insulation cabin Retractable positioning cams, spacing (mm) 270 FORMAT PROCESSING (for each side): Jointing unit 75.30 (6.6 kW x 2) EDGE BANDING SECTION (for each side): Gluing unit (P.U.R. glue + pre-melter) 04.1570 + 283.205 Edge magazine for rolls (compartment no. 6) End trimming unit 08.42 (0.2 kW x 2) 40 m/min Milling unit 08.055 (0.66 kW x 2) 0°-30° Multifunction unit (radius trimming and profile trimming unit) MFA 08.342 (0.66 kW x 2) max 25 m/min Profile trimming (copying) unit 08.465 (0.18 kW x 4) max 20 m/min Buffing unit 08.617-2 (0.18 kW x 2) Free space

Sąlyga: labai geros būklės (naudotas), DOUBLE-SIDED SIZING AND EDGE BANDING MACHINES – First (1st) machine in a line Edge thickness in rolls (min/max) mm Tjdjfi Tkgepfx Ag Rof Edge thickness in strips / veneers (min/max) mm Panel thickness (min/max) mm 12 - 60 Working width (min/max) mm 1300 Control/Software: ICOS open Feed speed (adjustable) m/min 9 - 45 No transmission bar (Master & Slave systems) Top pressure driven by V-belt SIZING UNIT (for each side): Jointing cutter unit 75.30 (Kw 6.6 x 1) EDGE BANDING UNIT (for each side): Gluing station (P.U.R. adhesive + premelter) 04.1569 + 283.205 Pressure rollers (revolver) for straight and shaped (softforming) edges mm 1,050 Edge magazine for rolls (compartment no.) 6 End trimming unit 08.42 (Kw 0.2 x 2) 40 m/min Pre-milling unit 08.055 (Kw 0.66 x 2) 0°-30° Milling unit 08.0582 (Kw 0.66 x 2) 0°-30° Scraper unit 08.50 Buffing unit 08.617-2 (Kw 0.18 x 2)

Sąlyga: labai geros būklės (naudotas), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 / 3 Panel thickness (min/max) mm 8 / 60 Control system ICOS Open Tsdpfxsd Scyds Ag Rof Feed speed m/min (adjustable) 16 - 30 Top pressure driven by V-belt Spray unit (for liquid anti-adhesive) Adjustable fence, CNC controlled Jointing cutter unit with CN-controlled 08.379 (Kw 4.0 x 2) Edge pressure zone (CN-controlled) Gluing unit (P.U.R. glue + pre-melter) VTG + 283.203 Edge magazine for rolls (compartment No.) 6 End trimming unit 08.42/30/B (Kw 0.2 x 2) max 30 m/min (0°-25°) Milling unit 08.0587 (Kw 1.0 x 2) 4 profiles Multi-function unit (radius milling and contour trimming unit) KFA 20 (Kw 0.5 x 1) max 25 m/min Profile scraper unit 08.516 (4 profiles) Flat scraper unit 08.521 Spray unit (for polishing fluid) Buffing unit 08.617-4 (Kw 0.18 x 4) Universal milling unit for grooving/rebating and profiling 08.190 (Kwv 4.5 x 1) 90°/180°/270° CNC

Sąlyga: labai geros būklės (naudotas), DOUBLE-SIDED EDGE BANDING MACHINE Edge thickness, roll material (min/max) mm 0.3 / 3 Edge thickness, solid/lath material (min/max) mm 0.8 / 12 Panel thickness (min/max) mm 8 / 60 Working width (min/max) mm 274 / 3300 Control system: ICOS OPEN Feed speed m/min (adjustable): 6 - 30 No transmission bar (master & slave systems) Top pressure driven by V-belt Spraying unit (for liquid anti-adhesive) Jointing unit 08.376 (KW 4.5 x2) Free station Gluing station (hot melt adhesive) 04.1570 Edge pressure zone Edge magazine for rolls (compartment No.): 2 End trimming unit 08.42 (KW 0.66 x 2) 0°-25° Milling unit 08.055 (KW 1 x 2) 0°-30° Multifunctional unit (radius milling and profile milling unit) 08.342 (KW 0.66 x 2) Profile scraper unit 08.519 Flat scraper unit 08.50 Spraying unit (for polishing liquid) Tsdpjd Rcigefx Ag Ref Buffing unit 08.612 Free station (for groove/slotting unit)