Ima Hka pirkti naudotą (144)

Būklė: labai geros būklės (naudotas), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm 0.4 / 3 Bsdjfi Tkvepfx Akujli Edge thickness in pre-cut veneer strips (max) mm 1.3 Panel thickness (min/max) mm 10 / 45 Working width (min/max) mm 244 / 2300 approx. Control / Software: ICOS Open Feed speed (m/min) 8 - 40 No transmission shafts (Master & Slave systems) Safety and sound insulation cabin Retractable positioning cams, spacing (mm) 270 FORMAT PROCESSING (for each side): Jointing unit 75.30 (6.6 kW x 2) EDGE BANDING SECTION (for each side): Gluing unit (P.U.R. glue + pre-melter) 04.1570 + 283.205 Edge magazine for rolls (compartment no. 6) End trimming unit 08.42 (0.2 kW x 2) 40 m/min Milling unit 08.055 (0.66 kW x 2) 0°-30° Multifunction unit (radius trimming and profile trimming unit) MFA 08.342 (0.66 kW x 2) max 25 m/min Profile trimming (copying) unit 08.465 (0.18 kW x 4) max 20 m/min Buffing unit 08.617-2 (0.18 kW x 2) Free space

Būklė: labai geros būklės (naudotas), DOUBLE-SIDED SIZING AND EDGE BANDING MACHINES – First (1st) machine in a line Edge thickness in rolls (min/max) mm Edge thickness in strips / veneers (min/max) mm Panel thickness (min/max) mm 12 - 60 Working width (min/max) mm 1300 Control/Software: ICOS open Feed speed (adjustable) m/min 9 - 45 No transmission bar (Master & Slave systems) Top pressure driven by V-belt SIZING UNIT (for each side): Jointing cutter unit 75.30 (Kw 6.6 x 1) EDGE BANDING UNIT (for each side): Gluing station (P.U.R. adhesive + premelter) 04.1569 + 283.205 Pressure rollers (revolver) for straight and shaped (softforming) edges mm 1,050 Edge magazine for rolls (compartment no.) 6 End trimming unit 08.42 (Kw 0.2 x 2) 40 m/min Pre-milling unit 08.055 (Kw 0.66 x 2) 0°-30° Bsdpofi Tkgefx Akuoli Milling unit 08.0582 (Kw 0.66 x 2) 0°-30° Scraper unit 08.50 Buffing unit 08.617-2 (Kw 0.18 x 2)

Būklė: labai geros būklės (naudotas), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 / 3 Panel thickness (min/max) mm 8 / 60 Control system ICOS Open Feed speed m/min (adjustable) 16 - 30 Top pressure driven by V-belt Spray unit (for liquid anti-adhesive) Adjustable fence, CNC controlled Jointing cutter unit with CN-controlled 08.379 (Kw 4.0 x 2) Edge pressure zone (CN-controlled) Gluing unit (P.U.R. glue + pre-melter) VTG + 283.203 Edge magazine for rolls (compartment No.) 6 Blodjd Scydjpfx Akuoi End trimming unit 08.42/30/B (Kw 0.2 x 2) max 30 m/min (0°-25°) Milling unit 08.0587 (Kw 1.0 x 2) 4 profiles Multi-function unit (radius milling and contour trimming unit) KFA 20 (Kw 0.5 x 1) max 25 m/min Profile scraper unit 08.516 (4 profiles) Flat scraper unit 08.521 Spray unit (for polishing fluid) Buffing unit 08.617-4 (Kw 0.18 x 4) Universal milling unit for grooving/rebating and profiling 08.190 (Kwv 4.5 x 1) 90°/180°/270° CNC

Būklė: naudotas, Complete factory for furniture manufacturing, consisting of: SZ0M23) Angle panel saw "GIBEN" Type 17 (5700x2700 mm) with "SIRIO" stacking system SZ0M25) Panel saw "GIBEN" Model GammaDue (3800x2200 mm) Bedpfx Ajcr U Urokusli SZ0M26) Multi-blade panel saw "GABBIANI" (finished panels 4250x2120 mm) SZ0M27) Laminating line (roller press) "BARBERAN" for melamine papers (paper glue application) SZ0M29) Press line "COLOMBO REMO" (1400x9600 mm) for paper/veneer/laminated panels SZ0M30) Press line "FRIZ" (1400x6200 mm) for paper/veneer/laminated panels SZ0M41) Double-sided sizing and edge banding line "IMA" Combima with high-speed "RBO-BIESSE" automatic handling system SZ0M42) Double-sided sizing and edge banding line "IMA" Combima Softforming with a second double-sided sizing and edge banding machine "STEFANI" and handling system "TOMASSINI" SZ0M39-40) Single-sided edge banding line for narrow workpieces "HOMAG" Model KAL 310 with splitter "NARDELLO" Model Elegance SZ0M35-36) Boring machine "BIESSE" Techno Logic with infeed and stacking system "TOMASSINI" SZ0M45) CNC-controlled drilling and dowel inserting line "BIESSE" Techno FDT with high-speed automatic handling system "RBO-BIESSE" SZ0M37) CNC machining center "MORBIDELLI" Model Author 600 KL SZ0M56) Roll slitting and winding machines "CEFLA-DUSPOHL" Type RSW 2200 T SZ0M01) Cutting line (circular saw) and wood strip cutting line "OGAM+SALVADOR" SZ0M07) Cutting line (circular saw) and wood strip stacking line "SALVADOR + SACOT" SZ0M08) Cutting line (circular saw) and wood strip stacking line "SALVADOR + CMA" SZ0M11-17) Preparation line for honeycomb panels SZ0M18) No. 6 multi-daylight press "COLOMBO REMO" (dimensions ?? x ?? mm) SZ0M21) Sizing and calibrating line for honeycomb panels "GABBIANI + CELASCHI + ELMAG + COSTA LEVIGATRICI" Numerous other machines (VITAP drilling machine, circular saws, glue application machines, etc.), dust extraction system, roller conveyors, shelving (wall racks), forklifts, pallet trucks, and more. The machines are still installed at the user’s site and can be inspected by appointment.

Būklė: labai geros būklės (naudotas), DOUBLE-SIDED EDGE BANDING MACHINE Edge thickness, roll material (min/max) mm 0.3 / 3 Edge thickness, solid/lath material (min/max) mm 0.8 / 12 Panel thickness (min/max) mm 8 / 60 Working width (min/max) mm 274 / 3300 Control system: ICOS OPEN Feed speed m/min (adjustable): 6 - 30 No transmission bar (master & slave systems) Top pressure driven by V-belt Spraying unit (for liquid anti-adhesive) Jointing unit 08.376 (KW 4.5 x2) Free station Gluing station (hot melt adhesive) 04.1570 Edge pressure zone Edge magazine for rolls (compartment No.): 2 Blsdjd Rcigspfx Akuei End trimming unit 08.42 (KW 0.66 x 2) 0°-25° Milling unit 08.055 (KW 1 x 2) 0°-30° Multifunctional unit (radius milling and profile milling unit) 08.342 (KW 0.66 x 2) Profile scraper unit 08.519 Flat scraper unit 08.50 Spraying unit (for polishing liquid) Buffing unit 08.612 Free station (for groove/slotting unit)

Būklė: labai geros būklės (naudotas), Single-sided edge banding machine (LEFT) Blsdpjflc Uhofx Akuei Edge thickness in rolls (min/max) mm: 0.3 - 3 Edge thickness in strips (min/max) mm: 3 - 12 Panel thickness (min/max) mm: 8 - 60 Control: ICOS open TS Feed speed m/min (adjustable): 4 - 20 Top pressure: driven by V-belt Sprayer unit (for liquid anti-adhesive) Jointing unit 08.376 (2 x 3 kW) Gluing unit (hot-melt adhesive) 283.1513 Edge pressure zone Edge magazine for rolls (compartment no.): 1 End trimming unit 08.415 (2 x 0.66 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° Multi-function unit (radius milling and contour milling unit) 08.342 (2 x 0.66 kW) Profile scraper unit 08.519 Flat scraper unit 08.50 Buffing unit 08.612 (2 x 0.25 kW)

Būklė: beveik kaip naujas (parodų įrenginys), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness for rolls (min/max) mm 0.3 / 3 – for strips mm max 1 Panel thickness (min/max) mm 8 / 60 (Laser – max 44) Control ICOS Open Feed speed m/min (adjustable) 16 – 30 Top pressure driven by V-belt Spraying unit (for liquid non-stick) Adjustable fence, CNC controlled Panel infeed system 700.101 (mm 500 x 500) Jointing cutter unit with CNC control 08.379 (Kw 4.0 x 2) Edge pressing zone (CNC controlled) Gluing unit (P.U.R. adhesive + premelter) 04.0836 + 283.1518 (edge feed servo motor) adjustable via CNC Glue application unit (premelter with laser) Laser System IMALUX Bljdpjgbug Nsfx Akuji Spraying unit (for separating agent) Pressure zone + edge magazine for rolls (compartment No.) 6 Cross-cut saw unit Linear 08.428 LKA V30/2 (Kw 0.2 x 2) speed up to 30 m / min (0° - 25°) Multi-profile milling unit (CNC controlled) 08.0587 (Kw 1.0 x 2) 4 profiles Contour milling unit (for fine milling) CNC controlled KFA 20 (Kw 0.5 x 1) max 25 m/min Profile scraper unit DUO (4 profiles) Flat scraper unit 08.521 Spraying unit (for polishing fluid) Buffing unit 08.617-4 (Kw 0.18 x 4) Universal milling unit for grooving/rebating and profiling 2x08.190 (Kw 4.5 x 2) 90°/180°/270° (CNC)

Būklė: labai geros būklės (naudotas), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Control: IMAtronic 231 (Software: IMAWOP) Maximum working area (X - Y - Z) mm: 5000 x 1630 x 100 Maximum working area for edge banding (X - Y - Z) mm: 3900 x 1450 x 60 No. 8 clamping tables with consoles (number of consoles) – mm 1200 LED setup assistance for vacuum suction cup (sleeve) positioning (Y-axis) No. 1 vacuum pump (capacity 140 m³/h) Safety enclosure for the working head, safety tread mats Chip conveyor No. 2 vertical main spindles (milling units) HSK F63 (1 x 11 kW + 1 x 7.5 kW) Automatic tool change system (carousel changer) with 18 tool positions No. 21 independent vertical drilling spindles (4 x 1.2 kW) No. 6 independent horizontal drilling spindles (1 x 3 kW) Edgebanding unit – gluing unit (hot-melt adhesive) VT 50 Edge magazine for rolls (6 compartments) OPTIONS: No. 1 saw adapter unit, 90 degrees fixed, max. diameter 200 mm Bedpfx Aefbmqtskuoli No. 1 adapter unit for flush trimming and profile scraper No. 1 horizontal drilling and milling head adapter unit (cross head) with 4 horizontal spindles

Būklė: labai geros būklės (naudotas), Single-sided edge banding machine (LEFT) Edge thickness in rolls (min/max) mm 0.3 - 3 Edge thickness in strips (min/max) mm 3 - 12 Panel thickness (min/max) mm 8 - 60 Control system: ICOS open TS Feed speed m/min (adjustable) 4 - 20 Top pressure: driven by V-belt Spraying unit (for liquid anti-adhesive) Jointing cutter unit 08.376 (2 x 3 kW) Gluing unit (hot melt adhesive) 283.1513 Edge pressure zone Edge magazine for rolls (compartment no.) 1 End trimming unit 08.415 (2 x 0.66 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° Bjdpfod Nuu Hsx Akueli Multi-function unit (radius milling and profile milling unit) 08.342 (2 x 0.66 kW) servo Profile scraping unit 08.519 Flat scraping unit 08.50 Buffing unit 08.612 (2 x 0.25 kW)

Būklė: labai geros būklės (naudotas), ONE-SIDED EDGE BANDING MACHINE (LEFT) Roll material (edges) thickness (min/max) mm: 0.3 - 3 Edge thickness in strips (min/max) mm: 1 Panel thickness (min/max) mm: 8 - 60 Control: ICOS Open Compact Feed speed m/min (adjustable): 6 - 30 Top pressure: V-belt driven Spray unit (for liquid non-stick) Bodpjm Udfwjfx Akueli Adjustable stop ruler, CNC controlled Jointing unit with CNC-controlled 08.378 (2 x 4.5 kW) Lamps for heating workpiece sides Gluing unit (hot melt glue + pre-melter) 04.1570 Spray unit (for separating liquid) Edge pressure zone Edge magazine for rolls (No. of compartments): 16 End trimming unit 08.42/30/B (2 x 0.66 kW - pneumatic 0° - 25°) 30 m/min Multi-profile milling unit (CNC controlled) 08.0587 (2 x 1 kW) Spray unit (for sliding liquid) Contour milling unit (for fine milling) CNC controlled KFA 30 (08.355 - 1 x 0.5 kW) 30 m/min Shaping unit (copying) 08.604 (4 x 0.25 kW) brush Multi-profile scraper unit (CNC controlled) 08.516 Flat scraper unit 08.521 Spray unit (for polishing liquid) Buffing unit 08.617 - 4 (4 x 0.18 kW) Finishing unit 08.53

Būklė: labai geros būklės (naudotas), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness in strips (min/max) mm: 0.8 / 20 Panel thickness (min/max) mm: 8 / 60 Control: ICOS Open Compact Feed speed m/min (adjustable): 6 - 30 Top pressure: belt-driven Adjustable guide fence: CNC-controlled Jointing unit with CNC-controlled 08.376 (Kw 4.5 x 2) Lamps for heating the workpiece edge Gluing unit (Hot Melt + Pre-melter) 283.1513 + 283.201 Edge pressure zone Bjdpfjidqphsx Akujli Edge magazine for rolls (compartments No.): 1 End trimming unit 08.42 (Kw 0.66 x 2) max 30 m/min, 0°-25° Milling unit 08.055 (Kw 1.85 x 2) 0°-30° Sprayer unit (for sliding fluid) Contour milling unit (for fine milling) CNC-controlled 08.348 (KW 0.66 x 2) 4 profiles Profile scraping unit 08.516 (4 profiles) Flat scraping unit 08.50 Sprayer unit (for polishing fluid) Buffing unit 08.612-2 (Kw 0.25 x 2) Universal milling unit for grooving, rebating, and profiling 08.183 (Kw 3 x 1)

Būklė: labai geros būklės (naudotas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Roll material (edges) thickness (min/max) mm: 0.3 / 3 Veneer edge application possible up to max. 1.0 mm (with limitations) Panel thickness (min/max): 8 mm – 40 mm (with MFA) / 60 mm (without MFA) Control / Software: ICOS Open Feed speed (adjustable) m/min: 6 – 30 Upper pressure system with motorized timing belt Spraying unit (for liquid anti-adhesive) Adjustable stop ruler Jointing unit - 08.378 (2 x 4.5 kW) Gluing unit (hot melt adhesive) 04.1570 Pressure zone Edge magazine for rolls (compartment no.): 2 End trimming unit 08.42/30/B (2 x 0.66 kW) 0°-25° (max. 30 m/min) Bljdpfxor Ttfls Akuei Milling unit 08.055 (2 x 1 kW) 0°-30° Multifunctional unit (radius milling and contour milling unit) 08.342 NC-controlled (2 x 0.66 kW) servo Profile scraper unit 08.519 Flat scraper unit 08.50 Buffing unit 08.617 (2 x 0.25 kW) Universal milling unit for grooving, rabbeting, and profiling 08.190 (1 x 4.5 kW)

Būklė: labai geros būklės (naudotas), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Cantilever design, ICOS-Open control system. Software: IMAWOP + IMAwinCAD Setup table with consoles. No. 6 consoles (1450 mm) DYNAPOINT Automatic positioning of the consoles (X axis) Automatic positioning of the vacuum pods (Y axis) Automatic tool changer – 18 tool positions Max. working area (X - Y - Z): 6300 x 1450 x 100 mm Min. workpiece size (X-Y-Z): 320 x 115 x 14 mm Max. workpiece size (X-Y-Z): 5600 x 2100 x 38 mm Chip conveyor Including separate electrical cabinet and control panel. Total connected load: 34 kW Bedpfx Astixpuokusli WORKING UNITS (TOP): 1 vertical main spindle (milling unit) HSK F63 – drive power 18 kW (S6) Saw 90°, fixed, diameter 200 mm Edge banding unit (installed on the machine) VT 100 2-position roll magazine Combined aggregate (flush milling/profile scraper) Feed system with brush table 6 clamps for fixing and moving the panel on the machine’s vacuum pods Workpiece outfeed with motorized rollers + right-angle transfer system

Būklė: labai geros būklės (naudotas), VIENPUSĖ BRIAUNŲ KLIJAVIMO MAŠINA (KAIRĖ PUSĖ) Briaunos storis ritiniais (min./maks.) mm 0,3 / 3 Briaunos storis juostomis / lentelėmis (min./maks.) mm 0,8 / 20 Plokštės storis (min./maks.) mm 8 / 60 Valdymas ICOS Open Padavimo greitis m/min (reguliuojamas) 6 - 30 Viršutinis spaudimas – pleištinis diržas Blsdpeyk Tkvefx Akuoi Apsauginės ir garso izoliacijos kabinos PAPILDOMAI: 63.152 plokščių padavimo sistema (mm 500 x 500) Reguliuojamas atraminis liniuotas – valdomas C.N Apipjovimo frezavimo mazgas su CN valdymu 08.379 (Kw 4,0 x 2) Kantės spaudimo zona (CN valdymas) Klijavimo blokas (karšto lydalo klijai) 283.1513 Briaunų ritinių magazinas (skyrių sk.): 1+2 Kirtimo mazgas 08.42/30/B (Kw 0,66 x 2) maks. 30 m/min (0°-25°) Frezavimo mazgas 08.055 (Kw 1,85 x 2) 0°-25° Daugiaveiksmis mazgas (spindulio frezavimas ir formos frezavimo mazgas) SKF-L (2 x Kw 0,18) + (2 x Kw 0,4) Profi linės nuvalymo mazgas 08.519 Plokščios nuvalymo mazgas 08.521 Purškimo mazgas (poliravimo skysčiui) Poliravimo mazgas 08.617-2 (Kw 0,18 x 2)

Būklė: labai geros būklės (naudotas), 5-Axis (X-Y-Z-C+ 5°) CNC MACHINING CENTER (POINT-TO-POINT) CNC machining center for milling, drilling, cutting, and edge banding ICOS CNC control unit (IMAWOP software) Maximum working area (X - Y - Z) mm: 4000 x 1600 (2000) x 100 (Z travel path mm 650) Maximum working area (X - Y - Z) during edge banding (mm): 4000 x 1600 x 100 No. 8 clamping tables with consoles (number of consoles) – mm 1400 LED positioning guides for vacuum suction cups (positioning along the Y-axis) No. 2 vacuum pumps (capacity 140 m³/h) Safety cabin for machining head, safety tread mats Chip conveyor No. 1 vertical main spindle (milling unit) ROBOT HEAD HSK F63 (16 kW) Automatic tool changer (carousel type), No. 18 tool positions No. 21 independent vertical drilling spindles (4 x 1.2 kW) No. 8 independent horizontal drilling spindles (4 in X + 4 in Y) Grooving saw unit (swivels 90° in X-Y direction), diameter (mm) 200 Edge banding unit (PUR glue + Pre-melter 283.203) VT 100 / 100 WITH 45° SWIVELLING EDGE BANDING UNIT No. 2 edge magazine for rolls OPTIONS: Bjdpfx Akow A Ruqeujli No. 1 adapter unit for flush or chamfer milling No. 1 adapter unit for flush milling and profile scraper

Būklė: labai geros būklės (naudotas), FLEXIBLE BATCH SIZE-1 PRODUCTION AND SINGLE-SIDED EDGE BANDING & FORMATTING LINE Comprising the following machines: M.01) LOADING TABLE AND AUTOMATIC WORKPIECE RETURN SYSTEM "SIRIO" BATCH SIZE ONE M.02) SINGLE-SIDED (right) FORMATTING AND EDGE BANDING MACHINE "IMA" Novimat I/R75/690/R3 Panel thickness (min/max) mm 8 / 60 - Working width (min/max) mm 200 / 1300 Edge material (rolls) thickness (min/max) mm 0.3 / 3 Control/software ICOS Open (Batch Size One) Feed rate (adjustable) m/min 6 - 30 Fully automatic panel infeed system for formatting A1 / 15 No. 2 jointing milling units, NC controlled 08.378 (4 motors x 4.5 kW) Gluing unit (Hot melt glue + pre-melter) VTG + 283.205 Edge magazine for rolls (24 positions) End trimming unit 08.42 / 30 / B / LS1 (2 x 0.2 kW) 0°-25° Pre-milling unit 08.055.0.1680 (1 x 0.85 kW) Multi-profile milling unit (NC controlled) 08.0587 HS/LS1 (2 x 1 kW) Contour milling unit (for fine trimming) NC controlled KFA x20 (1 x 0.5 kW) 20 m/min Multiple profile scraper unit (NC controlled) 08.516 HS/LS1 Flat scraper unit 08.521 Buffing unit 08.617-2 (2 x 0.18 kW) No. 3 universal milling units for grooving, rebating and profiling 08.190 (3 x 4.5 kW) NC controlled - 90°/180°/270° Blodpfxekt Uuao Akusi M.03) FEEDING AND STACKING SYSTEM "SIRIO"

Būklė: labai geros būklės (naudotas), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Control: ICOS CNC (IMAWOP Software) Maximum working area (X - Y - Z) mm: 3100 x 2000 x 100 Maximum working area (X - Y - Z) for edge banding (mm): 3100 x 1925 x 60 No. 6 clamping tables with consoles (number of consoles) - mm 1400 LED setup aid for vacuum cup (sleeve) positioning (Y-axis) No. 1 vacuum pump (capacity 250 m³/h) Safety enclosure for the working head, safety foot mats No. 1 vertical main spindle (milling unit) HSK F63 (18 kW) Automatic tool change system (carousel changer), 18 tool positions No. 14 independent vertical drilling spindles (2 x 1.2 kW) Cross unit with 4 horizontal drilling spindles + grooving saw (max. diameter mm 125) Bledpoq Nmutefx Akuoi Edgebanding unit - hot melt glue applicator VT 100 No. 2 edge magazine for roll material OPTIONS: No. 1 adapter unit "FLEX 5" model VARIO NC No. 1 adapter unit for flush or chamfer milling No. 1 adapter unit for flush milling and profile scraper No. 1 barcode reader

Būklė: labai geros būklės (naudotas), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 / 3 - in solid strip mm max 1 Panel thickness (min/max) mm 14 / 60 (LASER - Max 50) Bledei Hn Srepfx Akuei Control ICOS Open Feed speed m/min (adjustable) 6 - 30 Top pressure driven by V-belt Spray unit (for liquid release agent) Adjustable stop ruler CNC controlled Panel infeed system Jointing milling unit with CNC control 08.378 (2 x 4.5 kW) Edge pressure zone (CNC controlled) Gluing unit (PUR glue + pre-melter) 283.201 + 283.203 Gluing unit (pre-melter with laser) Laser System LASERLINE Spray unit (for separating agent) Pressure zone + edge magazine for rolls (compartments no.) 36 + 12 End trimming unit 08.428 (0.2 kW x 2) Speed up to 30 m/min (0° - 25°) Pre-milling unit 08.0555 HS/LS1 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 1) 4 profiles Contour milling unit (for fine milling) CNC controlled KFA 30 (0.5 kW x 1) max 30 m/min Multi-profile scraper unit (CNC controlled) 08.0516 (4 profiles) Flat scraper unit 08.521 Spray unit (for polishing liquid) Buffing unit 08.614 (0.25 kW x 4) Universal milling unit for grooving/rabbetting and profiling 2x08.190 (4.5 kW x 2) 90°/180°/270° (CNC)

Būklė: labai geros būklės (naudotas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 - 3 Panel thickness (min/max) mm 8 - 60 Control system: ICOS open compact Feed speed m/min (adjustable) 6 - 30 Top pressure belt-driven, spraying unit (for liquid anti-adhesive) Panel infeed system A1 / 15 Adjustable guide fence CNC-controlled. Panel infeed system Barcode reader Jointing milling unit with CNC control 08.379 (2 x 4.0 kW) Radiator for edge heating of workpieces Gluing unit (P.U.R. glue + premelter) VTG + 283.203 Edge pressing zone. Edge height adjustment – CNC-controlled. Bledpfjltmnlsx Akusi Edge magazine for rolls (compartment no.) 12 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°-25°) 30m/min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC-controlled) 08.0587 (0.66 kW x 2) 4 PROFILES HSK 25 Spraying unit (for sliding liquid) Contour milling unit (for fine milling) CNC-controlled KFA x30 (0.5 kW x 1) 30m/min Multi-profile scraper unit (CNC-controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 Spraying unit (for polishing liquid) Buffing unit 08.617 (0.18 kW x 4). Open space Universal milling unit for grooving/rabbetting and profiling 08.190 (4.5 kW x 1)

Būklė: labai geros būklės (naudotas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 / 3 Edge thickness in strips (min/max) mm 3 / 12 Panel thickness (min/max) mm 8 / 60 Bledpod Nt N Hjfx Akuoi Control ICOS open TS Feed speed m/min (adjustable) 4 – 20 Top pressure belt-driven Spray unit (for liquid non-stick agents) Adjustable stop ruler CNC-controlled Jointing cutter unit 08.379 (2 x 4.0 kW) Gluing unit (hot-melt glue & PU adhesive) 283.1513 Edge pressure zone (CNC-controlled) Edge magazine for rolls (compartment no.) 1 End trimming unit 08.415 (2 x 0.66 kW) Premilling unit 08.055 (2 x 1.0 kW) Profile milling unit (copying) SKF-L (CNC) 2 x 0.18 kW + 2 x 0.4 kW Profile scraper unit 08.519 Flat scraper unit 08.521 Buffing unit 08.617-2 (2 x 0.18 kW) Universal milling unit for grooving, rebating, and profiling 08.190 (1 x 4.5 kW) 90°-180°-270° OPTIONAL: Infeed table 65.152 (mm 500 x 500) The return system “GELDMEIER” Model ? (Ref. No. Z02009)

Būklė: labai geros būklės (naudotas), SINGLE-SIDED FLEXIBLE EDGE BANDING MACHINE INSERT FOR LOT 1 Edge thickness in rolls (min/max) mm 0.3 - 3 Panel thickness (min/max) mm 8 - 60 Control ICOS open Feed speed m/min (adjustable) 7-35 Top pressure belt driven, spraying unit (for liquid anti-adhesive) Adjustable stop ruler CNC controlled. Panel infeed system A2 / 30 Bljdpfx Akeifnzdeuei Jointing milling unit with CNC-controlled 75.34 (2 x 6.6 kW) Gluing unit (P.U.R. glue + pre-melter) 2 - VTG 3-48 + 286.205 Edge pressure zone. Edge height adjustment – CNC controlled. Edge magazine for rolls (compartment no.) 48 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°-25°) 30 m / min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 2) 4 PROFILES Sprayer unit (for sliding fluid) Contour milling unit (for fine milling) CNC controlled KFA x30 (0.5 kW x 1) 30 m/min Multi-profile scraper unit (CNC controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 (CNC controlled) Sprayer unit (for polishing fluid) Buffing unit 08.617 (0.18 kW x 4) No. 3 Universal milling units (CNC controlled) for grooving/rebating and profiling 08.190 (4.5 kW x 2 + 6.6 kW x 1)

Būklė: dilaminuotas dirbtuvėje (naudotas), DOUBLE-SIDED FORMATTING AND EDGE BANDING MACHINE – First (1st) Machine in a Line Bodpfxoyypi Us Akujli Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness in strips (min/max) mm: 0.4 / 1 Roll material (edges) thickness (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 / 1300 Control/Software: ICOS Open (Windows XP) Feed speed (adjustable) m/min: 10 - 50 No transfer bar (master & slave systems) FORMATTING OPERATION (on each side): • Spraying unit (for liquid anti-adhesive) • Milling unit (2 x 8 kW) EDGE BANDING OPERATION (on each side): • Gluing unit (Hot Melt glue + pre-melter) 04.1570 + 283.205 • Edge magazine for rolls (compartment qty): 6 • Servo-drive guillotine shears (for trimming edge material) • Pressure zone (CNC-controlled) • Premilling unit 08.055 (2 x 1 kW) 0°–30° • Profile scraping unit 08.519 • Flat scraping unit 08.50 • Buffing unit 08.617-2 (2 x 0.18 kW) • Spraying units (for polishing agent) • Universal milling unit for grooving/rebating and profiling – 08.190 (1 x 4.5 kW) 0°–90° / 180°–270°

Būklė: dilaminuotas dirbtuvėje (naudotas), Prijungimo galia 380V 5,5kW Volelio skersmuo 900 mm Staklių aukštis 2950 mm Staklių stalas 1310 x 1020 mm Bsdpfx Akex Ezqbeusli Sustojimo ribotuvas

Būklė: labai geros būklės (naudotas), 4-sided sizing- and edge-banding line + through-feed drilling machine Comprising the following machines: A) Loading system "IMA" (bridge type) with double pick-up station and central motorized roller conveyor. With 2 outer, floor-mounted, motorized roller conveyors for feeding panel stacks to the loader B) 1st double-sided sizing and edge-banding machine "IMA" model Combima/N/II/230/A/R3 (1300 mm) C) Panel turning device (from longitudinal to crosswise orientation) "IMA" D) 2nd double-sided sizing and edge-banding machine "IMA" model Combima/II/740/B/R3+ (3300 mm) with KFA 30 (contour milling unit for fine trimming) Bjdpfx Ajyyb Suskusli E) Through-feed drilling machine "IMA" model I-Magic (with 2 horizontal and 4 lower vertical drilling supports) F) Motorized roller conveyor "IMA" G) Panel turning device (from crosswise to longitudinal orientation) "IMA" H) Stacking system "IMA" (bridge type) with double stacking station and central motorized roller conveyor. With 2 outer, floor-mounted, motorized roller conveyors for removing panel stacks from the unloader

Būklė: naudotas, Milling and chamfering unit Manufacturer: IMA - for double-sided edge banding machine Blodpfobxp Nuex Akusi (1 unit left side / 1 unit right side)