Ima Hka pirkti naudotą (133)

Sąlyga: visiškai atnaujintas (naudotas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 - 3 Edge thickness in strips (min/max) mm 3.0 - 12.0 Panel thickness (min/max) mm 8 - 60 Control ICOS Feed speed m/min 16 Top pressure powered by V-belt Sprayer unit (for liquid non-stick agent) Jointing milling unit 08.376 (2 x 3.0 kW) Lamps for panel side heating Gluing unit (hot melt glue) 283.1513 Edge pressure zone Edge magazine for rolls (compartment No.) 1 End trimming unit 08.415 (2 x 0.66 kW) Milling unit 08.055 (2 x 1 kW) - 30° Multifunctional unit (radius milling and profile routing) 08.346 (2 x 0.66 kW) Profile scraper unit 08.519 Flat scraper unit 08.50 Sprayer unit (for polishing liquid) Buffing unit 08.612 (2 x 0.25 kW) Free space Blodsdfgfpjpfx Admsr

Sąlyga: dilaminuotas dirbtuvėje (naudotas), DOUBLE-SIDED SQUARING AND EDGE BANDING MACHINE – 1st machine in line Edge thickness in rolls (min/max): 0.3 / 3 mm Panel thickness (min/max): 8 / 45 mm Working width (min/max): 236 / 1300 mm Control/Software: ICOS Open Feed speed (adjustable): 10 / 50 m/min No transmission bar (Master & Slave systems) Safety and noise protection cabin SQUARING SECTION (per side): Spray unit (for liquid release agent) Interchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free position EDGE BANDING SECTION (per side): Gluing unit (Hot Melt + premelter) 04.1570 Pressure zone for edging Bljdpfxodh Tfgj Admjr Edgeband magazine for rolls (compartment no.): 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Flush trimming unit 08.517 Spray unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free position

Sąlyga: labai geros būklės (naudotas), Double-sided solo machine (or 1st and/or 2nd machine in a production line) Edge thickness, roll material (min/max) mm: 0.3 / 3 Edge thickness, strips / solid wood mm: 1.3 Panel thickness (min/max) mm: 8 / 40 Working width (min/max) mm: 266 / 2400 (option 3000) Cam spacing (mm): 540 (prepared for 270 mm) Bjdpfeu Ekbnox Admjlr Control system: ICOS OPEN Feed speed m/min (variable): up to 60 m/min No transmission bar (Master & Slave systems) FORMAT PROCESSING (for each side): Sprayer unit (for liquid anti-stick agent) Jointing cutter unit 08.376 (4.5 kW x2) Free space EDGE BANDING (for each side): Gluing unit (hot melt glue) 283.205 Edge pressure zone, edge magazine for rolls (dual) End trimming unit 08.42 (0.2 kW x2) 0°–25° (max. working speed 50 m/min, servo motor) Milling unit 08.055 (0.66 kW x2) 0°–30° Multifunction unit (radius milling & profile trimming unit) 08.342 (0.66 kW x2) Sprayer unit (for polishing agent) Free space (for optional addition of a scraper) Buffing unit 08.617 (0.18 kW x2)

Sąlyga: visiškai atnaujintas (naudotas), Single-Sided Edgebanding and Edge Processing Machine (Left) Edgeband Material (Roll) Thickness (min/max) mm: 0.3 - 3 Bjdocr T N Depfx Admolr Edgeband Thickness for Strips/Slats (min/max) mm: 1 ALU Panel Thickness (min/max) mm: 6 - 55 Control/Software: IMATRONIC 121 /01 Feed Speed (adjustable) m/min: 6 - 30 FORMATTING PROCESSING: Jointing Cutter Unit with CNC Control 08.376 (2 x 4.5 kW) Sprayer Unit (for liquid release agent) EDGEBANDING SECTION: Lamps for edge heating of workpieces Gluing Unit (PUR glue + pre-melter) 04.1569 Edge Pressure Zone mm: 1000 + edgeband magazine for rolls (compartment No. 6) End Trimming Unit 08.42 (2 x 0.66 kW) Working Speed 25 m/min (0–25°) Pre-Milling Unit 08.0555 (2 x 1 kW) Milling Unit 08.055 (2 x 1 kW) 0°–30° + Sprayer Unit (for sliding fluid) Contour Milling Unit (for fine trimming) CNC Controlled 08.348 (2 x 0.66 kW) Multi-Profile Scraper Unit (CNC controlled) 08.516 Flat Scraper Unit 08.517 (Pneumatic) + Sprayer Unit (for polishing fluid) Buffing Unit 08.614 (2 x 0.25 kW) Universal Milling Unit for Grooving, Rebating and Profiling 08.183 (1 x 3 kW) Smoothing Unit 08.53 Radius Sanding Unit for Straight Edges WI (4 x 0.75 kW)

Sąlyga: labai geros būklės (naudotas), 5-axis (X-Y-Z-C-5) CNC machining center for milling, drilling, cutting, and edge banding. Gantry construction with safety foot mats. PC control type ICOS OPEN CNC – IMAWOP software. Work tables with console design (No. 8 console tables x 1400 mm). Console table with LED/diode light strip. Automatic tool changer system (magazine slots – No. 18 slots). Usable working area (X-Y-Z): 4000 x 2100 x 300 mm. Usable working area (X-Y-Z) for edge banding: 4000 x 1800 x 60 mm. No. 2 working zones. Vacuum pump / capacity (m³/h): 140. Chip conveyor. With separate electrical and control cabinet. Total connected load (kW): 32. Machining units (upper): No. 21 independent vertical drilling spindles (4 x 1.2 kW). No. 1 main vertical spindle (milling unit) HSK 63 ROBOT (16 kW). Edge banding unit, glue applicator (hot melt glue) VT 100. Edgebanding material (rolls) thickness (min/max): 0.4 / 3 mm. Bedpshu U Nxefx Admslr Roll edge magazine (No. 2 compartments). OPTIONS: Saw unit, max diameter 200 mm. Combination unit (flush milling/profiling scraper). Drilling head (with No. 4 horizontal drilling spindles).

Sąlyga: labai geros būklės (naudotas), Double-sided single machine (or 1st and/or 2nd machine in a production line) Roll material (edges) thickness (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 / 1300 Control/software: ICOS Open (Windows-based) Without transfer rail (master & slave systems) Feed speed (adjustable) m/min: 10 - 50 Protective and soundproof cabins "Hopper" (the panels fall directly onto the motorized track chains) Bledpfxeum Unto Admor Cam pitch (mm): 270 FORMATTING (for each side): Spraying unit (for liquid non-stick agent) Protection cutter (pre-milling) 75.186 (1 x 4.4 kW) Milling unit (2 x 6.6 kW) Free space EDGE PROCESSING (for each side): Gluing unit (hot melt glue + pre-melter) 04.1570 + 283.201 Pressure zone + edge magazine for rolls (compartment no.) 6 End trimming unit 08.42 (2 x 0.66 kW) 30 m/min (0°-25°) Milling unit 08.055 (2 x 0.66 kW) 30 m/min Flat scraper unit 08.521 Spraying unit (for polishing fluid) Buffing unit 08.617-2 (2 x 0.18 kW) Free space

Sąlyga: labai geros būklės (naudotas), DOUBLE-SIDED EDGE BANDING AND FORMATTING MACHINE – First (1st) machine in a line Edge thickness in coil (min/max) mm: 0.3 / 3 Coil material (edge) thickness (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 / 1300 Control/Software: ICOS Open (Windows-based) Feed speed (adjustable) m/min: 10 - 50 Safety and soundproof cabins FORMATTING OPERATIONS (per side): Milling unit 75.30 (2 x kW 6.6) Free station EDGE BANDING OPERATIONS (per side): Gluing unit (Hot Melt adhesive + premelter) 04.1570 + 283.201 Pressure zone Edge magazine for coils (compartment no.): 6 Pre-milling unit 08.055 (2 x kW 1) 0°-30° Milling unit 08.055 (2 x kW 0.66) 0°-30° Profile scraper unit 08.515 Free station Buffing unit 08.617-2 (2 x kW 0.18) No. 2 universal milling units for grooving/rabbetting and profiling DX: 75.30 (2 x kW 4.4) 90°-180° Blodpfjunrwnex Admsr

Sąlyga: labai geros būklės (naudotas), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm 0.4 / 3 Edge thickness in pre-cut veneer strips (max) mm 1.3 Panel thickness (min/max) mm 10 / 45 Working width (min/max) mm 244 / 2300 approx. Control / Software: ICOS Open Feed speed (m/min) 8 - 40 No transmission shafts (Master & Slave systems) Safety and sound insulation cabin Retractable positioning cams, spacing (mm) 270 FORMAT PROCESSING (for each side): Jointing unit 75.30 (6.6 kW x 2) EDGE BANDING SECTION (for each side): Bodpsfi Tkvofx Admelr Gluing unit (P.U.R. glue + pre-melter) 04.1570 + 283.205 Edge magazine for rolls (compartment no. 6) End trimming unit 08.42 (0.2 kW x 2) 40 m/min Milling unit 08.055 (0.66 kW x 2) 0°-30° Multifunction unit (radius trimming and profile trimming unit) MFA 08.342 (0.66 kW x 2) max 25 m/min Profile trimming (copying) unit 08.465 (0.18 kW x 4) max 20 m/min Buffing unit 08.617-2 (0.18 kW x 2) Free space

Sąlyga: labai geros būklės (naudotas), DOUBLE-SIDED SIZING AND EDGE BANDING MACHINES – First (1st) machine in a line Edge thickness in rolls (min/max) mm Edge thickness in strips / veneers (min/max) mm Panel thickness (min/max) mm 12 - 60 Working width (min/max) mm 1300 Control/Software: ICOS open Feed speed (adjustable) m/min 9 - 45 No transmission bar (Master & Slave systems) Top pressure driven by V-belt SIZING UNIT (for each side): Jointing cutter unit 75.30 (Kw 6.6 x 1) EDGE BANDING UNIT (for each side): Gluing station (P.U.R. adhesive + premelter) 04.1569 + 283.205 Pressure rollers (revolver) for straight and shaped (softforming) edges mm 1,050 Edge magazine for rolls (compartment no.) 6 End trimming unit 08.42 (Kw 0.2 x 2) 40 m/min Bljdpfxjfi Tkgj Admjr Pre-milling unit 08.055 (Kw 0.66 x 2) 0°-30° Milling unit 08.0582 (Kw 0.66 x 2) 0°-30° Scraper unit 08.50 Buffing unit 08.617-2 (Kw 0.18 x 2)

Sąlyga: labai geros būklės (naudotas), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 / 3 Panel thickness (min/max) mm 8 / 60 Control system ICOS Open Feed speed m/min (adjustable) 16 - 30 Top pressure driven by V-belt Spray unit (for liquid anti-adhesive) Blodpfed Scydsx Admor Adjustable fence, CNC controlled Jointing cutter unit with CN-controlled 08.379 (Kw 4.0 x 2) Edge pressure zone (CN-controlled) Gluing unit (P.U.R. glue + pre-melter) VTG + 283.203 Edge magazine for rolls (compartment No.) 6 End trimming unit 08.42/30/B (Kw 0.2 x 2) max 30 m/min (0°-25°) Milling unit 08.0587 (Kw 1.0 x 2) 4 profiles Multi-function unit (radius milling and contour trimming unit) KFA 20 (Kw 0.5 x 1) max 25 m/min Profile scraper unit 08.516 (4 profiles) Flat scraper unit 08.521 Spray unit (for polishing fluid) Buffing unit 08.617-4 (Kw 0.18 x 4) Universal milling unit for grooving/rebating and profiling 08.190 (Kwv 4.5 x 1) 90°/180°/270° CNC

Sąlyga: naudotas, Complete factory for furniture manufacturing, consisting of: SZ0M23) Angle panel saw "GIBEN" Type 17 (5700x2700 mm) with "SIRIO" stacking system SZ0M25) Panel saw "GIBEN" Model GammaDue (3800x2200 mm) SZ0M26) Multi-blade panel saw "GABBIANI" (finished panels 4250x2120 mm) SZ0M27) Laminating line (roller press) "BARBERAN" for melamine papers (paper glue application) SZ0M29) Press line "COLOMBO REMO" (1400x9600 mm) for paper/veneer/laminated panels SZ0M30) Press line "FRIZ" (1400x6200 mm) for paper/veneer/laminated panels SZ0M41) Double-sided sizing and edge banding line "IMA" Combima with high-speed "RBO-BIESSE" automatic handling system SZ0M42) Double-sided sizing and edge banding line "IMA" Combima Softforming with a second double-sided sizing and edge banding machine "STEFANI" and handling system "TOMASSINI" SZ0M39-40) Single-sided edge banding line for narrow workpieces "HOMAG" Model KAL 310 with splitter "NARDELLO" Model Elegance SZ0M35-36) Boring machine "BIESSE" Techno Logic with infeed and stacking system "TOMASSINI" SZ0M45) CNC-controlled drilling and dowel inserting line "BIESSE" Techno FDT with high-speed automatic handling system "RBO-BIESSE" SZ0M37) CNC machining center "MORBIDELLI" Model Author 600 KL SZ0M56) Roll slitting and winding machines "CEFLA-DUSPOHL" Type RSW 2200 T SZ0M01) Cutting line (circular saw) and wood strip cutting line "OGAM+SALVADOR" SZ0M07) Cutting line (circular saw) and wood strip stacking line "SALVADOR + SACOT" SZ0M08) Cutting line (circular saw) and wood strip stacking line "SALVADOR + CMA" SZ0M11-17) Preparation line for honeycomb panels SZ0M18) No. 6 multi-daylight press "COLOMBO REMO" (dimensions ?? x ?? mm) Bledpfx Ajcr U Uredmjr SZ0M21) Sizing and calibrating line for honeycomb panels "GABBIANI + CELASCHI + ELMAG + COSTA LEVIGATRICI" Numerous other machines (VITAP drilling machine, circular saws, glue application machines, etc.), dust extraction system, roller conveyors, shelving (wall racks), forklifts, pallet trucks, and more. The machines are still installed at the user’s site and can be inspected by appointment.

Sąlyga: labai geros būklės (naudotas), DOUBLE-SIDED EDGE BANDING MACHINE Edge thickness, roll material (min/max) mm 0.3 / 3 Edge thickness, solid/lath material (min/max) mm 0.8 / 12 Panel thickness (min/max) mm 8 / 60 Working width (min/max) mm 274 / 3300 Control system: ICOS OPEN Feed speed m/min (adjustable): 6 - 30 No transmission bar (master & slave systems) Top pressure driven by V-belt Spraying unit (for liquid anti-adhesive) Jointing unit 08.376 (KW 4.5 x2) Free station Gluing station (hot melt adhesive) 04.1570 Edge pressure zone Edge magazine for rolls (compartment No.): 2 End trimming unit 08.42 (KW 0.66 x 2) 0°-25° Milling unit 08.055 (KW 1 x 2) 0°-30° Multifunctional unit (radius milling and profile milling unit) 08.342 (KW 0.66 x 2) Profile scraper unit 08.519 Flat scraper unit 08.50 Bedpfxjd Rcigo Admelr Spraying unit (for polishing liquid) Buffing unit 08.612 Free station (for groove/slotting unit)

Sąlyga: labai geros būklės (naudotas), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 upper horizontal support beam (with sliding carriage) No. 1 motorized carriage with horizontal metal arms External roller conveyor (at floor level) for feeding the stack of panels to the loading station Bljdpfx Ajfi Tg Hjdmor External motorized roller conveyor (for receiving panels from the loading station) Separate electrical control panel Perimeter safety fence with safety mats Operating capacity (cycles / min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Min. panel dimensions mm 250 x 320 (approx.) Max. panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Sąlyga: labai geros būklės (naudotas), CNC MACHINING CENTER (POINT-TO-POINT) – 5 Axis (ROBOT Head) Gantry construction design Control: ICOS CNC – Software: IMAWOP / (OPTION: IMAwinCAD) Safety enclosure for machining head Clamping table with 8 consoles LED positioning system along X-axis for console positioning and Y-axis for vacuum clamp positioning Automatic tool change system 2 rotary tool changers – Magazine/tool positions: 8 + TC8 (total 18 positions) Maximum working area (X – Y – Z): 4300 mm x 1300 mm (1410 mm) x 350 mm 2 working zones – Vacuum pump (capacity m³/h): 140 Separate electrical and control panel. Total connected load (kW): 23 WORKING UNITS (TOP): Bedpfx Adefin Saomjlr 21 independent vertical drilling spindles 4 independent horizontal drilling spindles (drilling head motor power: 1.2 kW x 4) 1 grooving saw unit, 125 mm diameter, swivels 90° in X-Y direction 1 vertical main spindle (milling unit) – robot head (HSK F63) Power of vertical main spindle: 9 kW Independent Z-axis travel: 650 mm Axis A mounted at a 90° angle to the C-axis C-axis rotation range: 420°, A-axis rotation range: 140°.

Sąlyga: labai geros būklės (naudotas), Single-sided edge banding machine (LEFT) Edge thickness in rolls (min/max) mm: 0.3 - 3 Edge thickness in strips (min/max) mm: 3 - 12 Panel thickness (min/max) mm: 8 - 60 Control: ICOS open TS Feed speed m/min (adjustable): 4 - 20 Top pressure: driven by V-belt Sprayer unit (for liquid anti-adhesive) Jointing unit 08.376 (2 x 3 kW) Gluing unit (hot-melt adhesive) 283.1513 Edge pressure zone Edge magazine for rolls (compartment no.): 1 End trimming unit 08.415 (2 x 0.66 kW) Bljdpeflc Uhofx Admer Milling unit 08.055 (2 x 1 kW) 0°-30° Multi-function unit (radius milling and contour milling unit) 08.342 (2 x 0.66 kW) Profile scraper unit 08.519 Flat scraper unit 08.50 Buffing unit 08.612 (2 x 0.25 kW)

Sąlyga: beveik kaip naujas (parodų įrenginys), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness for rolls (min/max) mm 0.3 / 3 – for strips mm max 1 Panel thickness (min/max) mm 8 / 60 (Laser – max 44) Control ICOS Open Feed speed m/min (adjustable) 16 – 30 Top pressure driven by V-belt Spraying unit (for liquid non-stick) Adjustable fence, CNC controlled Panel infeed system 700.101 (mm 500 x 500) Jointing cutter unit with CNC control 08.379 (Kw 4.0 x 2) Edge pressing zone (CNC controlled) Bedpfxsgbug Nj Admslr Gluing unit (P.U.R. adhesive + premelter) 04.0836 + 283.1518 (edge feed servo motor) adjustable via CNC Glue application unit (premelter with laser) Laser System IMALUX Spraying unit (for separating agent) Pressure zone + edge magazine for rolls (compartment No.) 6 Cross-cut saw unit Linear 08.428 LKA V30/2 (Kw 0.2 x 2) speed up to 30 m / min (0° - 25°) Multi-profile milling unit (CNC controlled) 08.0587 (Kw 1.0 x 2) 4 profiles Contour milling unit (for fine milling) CNC controlled KFA 20 (Kw 0.5 x 1) max 25 m/min Profile scraper unit DUO (4 profiles) Flat scraper unit 08.521 Spraying unit (for polishing fluid) Buffing unit 08.617-4 (Kw 0.18 x 4) Universal milling unit for grooving/rebating and profiling 2x08.190 (Kw 4.5 x 2) 90°/180°/270° (CNC)

Sąlyga: labai geros būklės (naudotas), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Control: IMAtronic 231 (Software: IMAWOP) Maximum working area (X - Y - Z) mm: 5000 x 1630 x 100 Maximum working area for edge banding (X - Y - Z) mm: 3900 x 1450 x 60 No. 8 clamping tables with consoles (number of consoles) – mm 1200 LED setup assistance for vacuum suction cup (sleeve) positioning (Y-axis) No. 1 vacuum pump (capacity 140 m³/h) Safety enclosure for the working head, safety tread mats Chip conveyor No. 2 vertical main spindles (milling units) HSK F63 (1 x 11 kW + 1 x 7.5 kW) Automatic tool change system (carousel changer) with 18 tool positions No. 21 independent vertical drilling spindles (4 x 1.2 kW) Bsdpfefbmqtsx Admjlr No. 6 independent horizontal drilling spindles (1 x 3 kW) Edgebanding unit – gluing unit (hot-melt adhesive) VT 50 Edge magazine for rolls (6 compartments) OPTIONS: No. 1 saw adapter unit, 90 degrees fixed, max. diameter 200 mm No. 1 adapter unit for flush trimming and profile scraper No. 1 horizontal drilling and milling head adapter unit (cross head) with 4 horizontal spindles

Sąlyga: labai geros būklės (naudotas), Single-sided edge banding machine (LEFT) Edge thickness in rolls (min/max) mm 0.3 - 3 Edge thickness in strips (min/max) mm 3 - 12 Panel thickness (min/max) mm 8 - 60 Control system: ICOS open TS Feed speed m/min (adjustable) 4 - 20 Top pressure: driven by V-belt Spraying unit (for liquid anti-adhesive) Jointing cutter unit 08.376 (2 x 3 kW) Gluing unit (hot melt adhesive) 283.1513 Edge pressure zone Edge magazine for rolls (compartment no.) 1 Blodpfx Aod Nuu Hedmor End trimming unit 08.415 (2 x 0.66 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° Multi-function unit (radius milling and profile milling unit) 08.342 (2 x 0.66 kW) servo Profile scraping unit 08.519 Flat scraping unit 08.50 Buffing unit 08.612 (2 x 0.25 kW)

Sąlyga: labai geros būklės (naudotas), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 horizontal upper support beam (on which the carriage glides) Blodpfewbp Nwsx Admor No. 1 motorized carriage with horizontal metal arms No. 2 external roller conveyors for the discharge of the panel stack from the unloader No. 1 external motorized roller conveyor at the stacking area Separate electrical control panel Perimeter safety fencing Performance (cycles/minute): approx. 16 Min/Max panel thickness (mm): approx. 10 / 50 Min. panel dimensions (mm): approx. 250 x 320 Max. panel dimensions (mm): approx. 1300 x 3000 Total connected load (kW): 80

Sąlyga: labai geros būklės (naudotas), 4-axis CNC-controlled MACHINING CENTER Gantry-style construction, ICOS-Open control system. Software: IMAWOP / IMATRONIC - BIMA Fast Cut Clamping table with beam supports. Number of supports: 6 (1400 mm) Automatic positioning of the supports (X-axis) Automatic positioning of vacuum suction cups (Y-axis) Automatic tool change system Disc-type tool changer – magazine capacity: 18 tool positions Maximum working area (X - Y - Z): 4250 x 1600 x 60 mm Minimum workpiece dimensions (X-Y-Z): 295 x 115 x 14 mm Maximum workpiece dimensions (X-Y-Z): 4250 x 2200 x 60 mm Chip conveyor Supplied with separate electrical and control cabinet Blsdpfx Adevxhnusmjr Total connected load (kW): 28 WORKING UNITS (TOP): Vertical main spindle (milling unit) HSK F63 – Power: 14.5 kW (S6) / 7.5 kW (S1) 3 clamps for securing and moving panels to the machine’s vacuum pods 5 air tables for staging panels before processing Programmable vacuum system for lifting panels onto the conveyor belt Panel exit system with motorized conveyor belts

Sąlyga: labai geros būklės (naudotas), COMPLETE 4-SIDED SIZING AND EDGE BANDING LINE The line consists of the following machines: Bledpfsun N Dljx Admjr A) W06027 1st Double-Sided Sizing and Edge Banding Machine "IMA" Combima II /440 /A /R3 B) Rotating Station (90°) C) W06028 2nd Double-Sided Sizing and Edge Banding Machine "IMA" Combima II /190 /B /R3

Sąlyga: labai geros būklės (naudotas), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness in strips (min/max) mm: 0.8 / 20 Panel thickness (min/max) mm: 8 / 60 Control: ICOS Open Compact Feed speed m/min (adjustable): 6 - 30 Top pressure: belt-driven Adjustable guide fence: CNC-controlled Jointing unit with CNC-controlled 08.376 (Kw 4.5 x 2) Lamps for heating the workpiece edge Gluing unit (Hot Melt + Pre-melter) 283.1513 + 283.201 Edge pressure zone Edge magazine for rolls (compartments No.): 1 End trimming unit 08.42 (Kw 0.66 x 2) max 30 m/min, 0°-25° Milling unit 08.055 (Kw 1.85 x 2) 0°-30° Sprayer unit (for sliding fluid) Contour milling unit (for fine milling) CNC-controlled 08.348 (KW 0.66 x 2) 4 profiles Profile scraping unit 08.516 (4 profiles) Flat scraping unit 08.50 Sprayer unit (for polishing fluid) Bedpsidqphsfx Admslr Buffing unit 08.612-2 (Kw 0.25 x 2) Universal milling unit for grooving, rebating, and profiling 08.183 (Kw 3 x 1)

Sąlyga: labai geros būklės (naudotas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Roll material (edges) thickness (min/max) mm: 0.3 / 3 Bodpfer Ttflex Admelr Veneer edge application possible up to max. 1.0 mm (with limitations) Panel thickness (min/max): 8 mm – 40 mm (with MFA) / 60 mm (without MFA) Control / Software: ICOS Open Feed speed (adjustable) m/min: 6 – 30 Upper pressure system with motorized timing belt Spraying unit (for liquid anti-adhesive) Adjustable stop ruler Jointing unit - 08.378 (2 x 4.5 kW) Gluing unit (hot melt adhesive) 04.1570 Pressure zone Edge magazine for rolls (compartment no.): 2 End trimming unit 08.42/30/B (2 x 0.66 kW) 0°-25° (max. 30 m/min) Milling unit 08.055 (2 x 1 kW) 0°-30° Multifunctional unit (radius milling and contour milling unit) 08.342 NC-controlled (2 x 0.66 kW) servo Profile scraper unit 08.519 Flat scraper unit 08.50 Buffing unit 08.617 (2 x 0.25 kW) Universal milling unit for grooving, rabbeting, and profiling 08.190 (1 x 4.5 kW)

Sąlyga: labai geros būklės (naudotas), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Cantilever design, ICOS-Open control system. Software: IMAWOP + IMAwinCAD Setup table with consoles. No. 6 consoles (1450 mm) DYNAPOINT Automatic positioning of the consoles (X axis) Automatic positioning of the vacuum pods (Y axis) Automatic tool changer – 18 tool positions Max. working area (X - Y - Z): 6300 x 1450 x 100 mm Min. workpiece size (X-Y-Z): 320 x 115 x 14 mm Max. workpiece size (X-Y-Z): 5600 x 2100 x 38 mm Chip conveyor Including separate electrical cabinet and control panel. Total connected load: 34 kW WORKING UNITS (TOP): 1 vertical main spindle (milling unit) HSK F63 – drive power 18 kW (S6) Saw 90°, fixed, diameter 200 mm Edge banding unit (installed on the machine) VT 100 2-position roll magazine Combined aggregate (flush milling/profile scraper) Bledjtixpujpfx Admer Feed system with brush table 6 clamps for fixing and moving the panel on the machine’s vacuum pods Workpiece outfeed with motorized rollers + right-angle transfer system

Sąlyga: labai geros būklės (naudotas), FLEXIBLE BATCH SIZE-1 PRODUCTION AND SINGLE-SIDED EDGE BANDING & FORMATTING LINE Comprising the following machines: M.01) LOADING TABLE AND AUTOMATIC WORKPIECE RETURN SYSTEM "SIRIO" BATCH SIZE ONE Bodpfx Adjkt Uuasmjlr M.02) SINGLE-SIDED (right) FORMATTING AND EDGE BANDING MACHINE "IMA" Novimat I/R75/690/R3 Panel thickness (min/max) mm 8 / 60 - Working width (min/max) mm 200 / 1300 Edge material (rolls) thickness (min/max) mm 0.3 / 3 Control/software ICOS Open (Batch Size One) Feed rate (adjustable) m/min 6 - 30 Fully automatic panel infeed system for formatting A1 / 15 No. 2 jointing milling units, NC controlled 08.378 (4 motors x 4.5 kW) Gluing unit (Hot melt glue + pre-melter) VTG + 283.205 Edge magazine for rolls (24 positions) End trimming unit 08.42 / 30 / B / LS1 (2 x 0.2 kW) 0°-25° Pre-milling unit 08.055.0.1680 (1 x 0.85 kW) Multi-profile milling unit (NC controlled) 08.0587 HS/LS1 (2 x 1 kW) Contour milling unit (for fine trimming) NC controlled KFA x20 (1 x 0.5 kW) 20 m/min Multiple profile scraper unit (NC controlled) 08.516 HS/LS1 Flat scraper unit 08.521 Buffing unit 08.617-2 (2 x 0.18 kW) No. 3 universal milling units for grooving, rebating and profiling 08.190 (3 x 4.5 kW) NC controlled - 90°/180°/270° M.03) FEEDING AND STACKING SYSTEM "SIRIO"