„COMBI“ ĮRENGINYS (DYDIS IR APDAILA)

IMA Combima /K /II /950 /F /R75 /R1.3

Būklė: labai geros būklės (naudotas), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 upper horizontal support beam (with sliding carriage) No. 1 motorized carriage with horizontal metal arms External roller conveyor (at floor level) for feeding the stack of panels to the loading station External motorized roller conveyor (for receiving panels from the loading station) Fodpfx Afsfi Tg Hedegc Separate electrical control panel Perimeter safety fence with safety mats Operating capacity (cycles / min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Min. panel dimensions mm 250 x 320 (approx.) Max. panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Gamybos metai: 2002, būklė: dilaminuotas dirbtuvėje (naudotas), Fully Automatic Finger Jointing Line: Type Doppel-Pack with Automatic Feeding with Multiple Cross-Cut Saw with Stacking Unit Specification: Wood Infeed Length: min. 150 mm max. 1000 mm Fgodpfxog D Ugks Afdjc average 400 mm Wood Cross-Section: min. 20 x 40 mm max. 80 x 180 mm Wood Outfeed Length: 6030 mm Max. Wood Cross-Section with 10 mm Finger Length: Hardwood 120 cm² Softwood 150 cm² Finger Joint configuration: vertical and horizontal Type of Glue: PVAC white glue, double-sided glue application Electrical Power: Connection Voltage: 400 V Control Voltage: 24 V 50 Hz System completely wired up to the control cabinet. Finger length, possible wood cross-section, and glue type can still be adapted. Performance: 6 milling tables/min Working Height: 960 mm Table Width: 600 mm Glue Application: double-sided application Technical Parameters: Input Material: Input Length of Parts (min. - max.): 150-1000 mm Part Width (min. - max.): 40-155 mm Part Thickness (min. - max.): 20-80 mm Working Height: 960 mm Bundle Width: 600 mm Glue Application: double-sided application

Gamybos metai: 1980, būklė: naudotas, Pressure: 80 t Outreach: – mm Stroke: 50 mm Table surface: 875 x 695 mm Ram surface: 350 x 355 mm Ram adjustment: 71 mm Strokes per minute: 30 – 90 Gap width: 450 mm Machine weight approx. 6.2 t Space requirement approx. 2.0 x 2.1 x 3.2 m Installation height (stroke down, ram adjustment up): 480 mm Fgodpjdlcy Hjfx Afdoc Further information: - The machine is currently being partially overhauled - The machine has been newly equipped with the following components: * Separate free-standing control cabinet with touchscreen, including wiring * New paintwork of individual components in disassembled state After the partial overhaul, the machine is safe for manual loading operation at open tools. Before delivery, a current UVV safety inspection and brake time measurement will be carried out.

Būklė: labai geros būklės (naudotas), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness with veneer strips (min/max) mm: 3 / 10 Panel thickness (min/max) mm: 8 / 60 Working width (min/max) mm: 236 / 3300 Control/Software: ICOS Open Feed speed (m/min): 10 - 50, without transmission bar (Master & Slave systems) Stop cams retractable, distance (mm): 1080 FORMAT PROCESSING (per side): Protective cutter (pre-milling) 75.186 (1 x kW 4.4) Chipping unit (2 x kW 8) Jointing milling unit 08.376 (1 x kW ?) EDGE BANDING SECTION (per side): Gluing unit (hot melt adhesive) 283.1513 04.1570 + 283.205 Edge pressure zone – edge magazine for rolls (compartment no. 6) End trimming unit 08.42 (2 x kW 0.66) 30 m/min (0°-25°) Milling unit 08.055 (2 x kW 1) 0° - 30° Fgedpod Nt Rqefx Afdoc Multifunctional unit (radius milling and contour milling unit) 08.342 (2 x kW 0.66) servomotors Profile scraper unit 08.519 Flat scraper unit 08.521 Sprayer unit (for polishing fluid) Buffing unit 08.617-4 (4 x kW 0.18) Universal milling unit for grooving/rebating and profiling 08.190 (1 x kW 4.5) 90°-180°-270°

Būklė: dilaminuotas dirbtuvėje (naudotas), DOUBLE-SIDED SQUARING AND EDGE BANDING MACHINE – 1st machine in line Edge thickness in rolls (min/max): 0.3 / 3 mm Panel thickness (min/max): 8 / 45 mm Working width (min/max): 236 / 1300 mm Control/Software: ICOS Open Feed speed (adjustable): 10 / 50 m/min No transmission bar (Master & Slave systems) Safety and noise protection cabin SQUARING SECTION (per side): Spray unit (for liquid release agent) Interchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free position EDGE BANDING SECTION (per side): Gluing unit (Hot Melt + premelter) 04.1570 Pressure zone for edging Edgeband magazine for rolls (compartment no.): 6 Fodpfjdh Tfgsx Afdogc Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Flush trimming unit 08.517 Spray unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free position

Būklė: naudotas, Gamybos metai: 2021, veikimo valandos: 3 304 h, Funkcionalumas: visiškai funkcionalus, Basic Package AK 640 SA Fjdpfxsxx Tige Afdogc Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Tri-axle semi-trailer chassis, 80 km/h road approval Braking system including ABS and lighting in accordance with EC directive Tyres 385/65 R22.5 Permissible gross weight 32,000 kg Hydraulically adjustable support legs Splash protection (inner and side mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm complies with EUROMOT V emission standard Auxiliary hydraulic connection 20 l/min Load-dependent feed control including automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with mounted tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned lubrication strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs, opening/closing rear basket, folding/unfolding rear conveyor belt, disengaging travel drive) when engine is off 24 V electrical control system Separate control box at the rear of the machine Hydraulically folding fine shredding basket Multimesh (mesh sizes between 30 - 280 mm, increments on request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, with antimagnetic centre section Underslung conveyor: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water supply connection Scraper floor with 71 slats Wear protection in drum area Reinforcement plates at the feed hopper (made of wear-resistant steel) on both sides for sidewall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paint finish: RAL 2011 deep orange Optional equipment: Hydraulic travel drive Scraper floor chain lubrication Neodymium overband magnet Frame for overband magnet Central lubrication system Engine compartment guard plate Lighting package: engine compartment and rear conveyor Watering system Delivery date according to agreement Available from 06/2026

Gamybos metai: 1999, būklė: geras (naudotas), Biesse Polymac ERGHO 5 Edge Banding Machine, Year of Manufacture: 1999 Biesse Italy Fgedpfx Afogtx Aqjdsc S/N 80709 Maximum panel thickness: 10–45 mm Minimum and maximum edge band thickness: 13–60 mm Maximum edge banding material thickness (in rolls): 0.4–3 mm Minimum panel width: 50 mm Minimum panel length: 150 mm Feed speed (m/min): 10/20 Technical specifications: • Glue pot VC 700 • End trimming unit 701 • Edge trimming unit RS 700 • Corner rounding unit CR 200 • Tilting edge trimming & chamfering unit RI 700 • Compact scraper blade RBK501 • Buffing unit SP700 • Edge sanding unit LV 700 Additional features: • Heated infeed guide • PLC control • Panel support guide • Large diameter roll holder • Edge trimming device for 3 mm thick roll edges 400 V, 50 Hz CE marked Machine dimensions (L x W x H): 4950 mm x 1700 mm x 1530 mm Weight: 2,900 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2010, veikimo valandos: 2 000 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 093, bendras svoris: 30 000 kg, transporto plotis: 2 500 mm,

Būklė: reikia remonto (naudotas), Funkcionalumas: nepatikrintas, Dimter HK 400 dantytųjų jungčių įrenginys Dantytųjų jungčių įrenginys medienos paketams Įeinančio ruošinio ilgiai: 800–6.000 mm Frezavimo aukštis: 285 mm, pasirinktinai 300 mm Spalva: mėlyna Susideda iš: 1 poz. Paketavimas 2 poz. Paketų ritininis konvejeris 3 poz. Centrinė freza 4 poz. Paketų ritininis konvejeris 5 poz. Paketų atskyrimas 6 poz. Grandininis skersinis konvejeris 7 poz. Pakrovimo ritininis konvejeris 8 poz. Ciklinė presas 9 poz. Pavaros blokas 10 poz. Išilginis pjūklas Įskaitant valdymo spintą Fodpfx Ajvi Hw Nofdegc Įrenginys reikalauja remonto ir parduodamas esamos būklės. Jis jau demontuotas ir laikomas Achern mieste. Visi techniniai dokumentai yra. Kilus klausimams apie įrenginį ar dėl techninių konsultacijų, visada laukiame jūsų užklausos. Konsultuosime jus remonto ir surinkimo klausimais.

Būklė: Defektas atsarginių dalių laikiklis (naudotas), Gamybos metai: 2013, Manufacturer: HSM Model: HL 4010 Li Year of manufacture: 2013 The equipment is incomplete and is being sold for parts. Defects: Hydraulic pump missing Control unit missing Power supply missing Fgsdpfxjur Ravo Afdsc