Ima Bima pirkti naudotą (132)

Sąlyga: labai geros būklės (naudotas), Zum Anleimen von Kanten an gerade, runde und profilierte Werkstücke - Manuelle Werkstückzuführung - Mit Leimbecken und Leimauftragswalze - Mit Rollen- bzw. Coil-Ablagetisch - Min./Max. Werkstückdicke: 16 / 40 mm - Kantendickenbereich: 0,4 bis 3 mm Hsdpfx Afjhgbfao Ijfb - Schwenkbarer Arbeitstisch 0°-45° - Gesamtanschlussleistung ca. 4 kW

Gamybos metai: 1998, Sąlyga: geras (naudotas), I am selling a shaped workpiece edgebanding machine IMA HKA. Suitable for curved elements. Good condition, inspection possible! Hfedpfx Afsg Dvrij Isb

Sąlyga: geras (naudotas), Used IMA 863 fabric spreading machine, width 240 cm, working width 220 cm, table length 16 meters, blower, new unwinding covers. Hodot Ipnqspfx Af Iofb Price: €7,000.00

Sąlyga: naudotas, Gamybos metai: 2017, veikimo valandos: 3 123 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 50614, For sale: Used IMA Advantage 400 edge banding machine. Hodpfx Afeww Htls Ijfb This machine is distinguished by milling units and a profile scraper on servomotors, all controlled via the computer interface. Additionally, three sets of cleaning fluids are included. The machine has recently undergone maintenance: the glue tank has been refurbished, and the feed chain blocks as well as the transport belt have been replaced. The machine is in working condition, under continuous operation, and is 100% functional. Currently, the operating time amounts to 3,123 hours, with a total of 628,910 linear meters processed. Feel free to contact me for further information or to arrange a purchase.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 06601, X ašies padavimo greitis: 12 m/min, tuščias svoris: 2 500 kg, Įranga: CE žymėjimas, TECHNINĖ INFORMACIJA Maksimalus briaunos klijavimo storis: 12 mm Minimali ruošinio storis: 10 mm Maksimalus ritininės medžiagos storis: 3 mm Padavimo greitis: 12 m/min Įšilimo laikas: 10 min Kapavimo žirklės: 0,2–3,0 mm Hfjdpoxuqwmsfx Af Ieb ĮRENGINIO DUOMENYS Matmenys ir svoris Matmenys (I x P x A): 6.500 x 1.000 x 1.600 mm Svoris: 2.500 kg ĮRANGA Prilyginimo agregatas su 2 frezavimo agregatais Automatinis ritinių magazinas Masivių kraštų magazinas Plokštės pašildymas kaitinimo elementais Automatinis klijavimas su klijų rezervuaru granulėms Nupjovimo pjūklas, kampo pozicija valdoma programa Daugiafunkcis agregatas Apvalinimo/ kampų kopijavimo agregatas su 2 varikliais Profilio traukimo peilis Plokščias traukimo peilis Poliravimo agregatas Agregatų indikacija su mechaniniu skaitmeniniu rodmeniu Valdymas per valdymo pultą Valdymas su pasirinkimo jungikliais/ mygtukais Apsauginis gaubtas CE ženklinimas

Sąlyga: naudotas, Yra 2 vienetai Hfedpfx Aed Tmabof Ieb Daugiau informacijos rasite pridėtose nuotraukose.

Sąlyga: labai geros būklės (naudotas), Single-sided edge banding machine (LEFT) Edge thickness in rolls (min/max) mm: 0.3 - 3 Edge thickness in strips (min/max) mm: 3 - 12 Panel thickness (min/max) mm: 8 - 60 Hedjflc Uhopfx Af Iefb Control: ICOS open TS Feed speed m/min (adjustable): 4 - 20 Top pressure: driven by V-belt Sprayer unit (for liquid anti-adhesive) Jointing unit 08.376 (2 x 3 kW) Gluing unit (hot-melt adhesive) 283.1513 Edge pressure zone Edge magazine for rolls (compartment no.): 1 End trimming unit 08.415 (2 x 0.66 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° Multi-function unit (radius milling and contour milling unit) 08.342 (2 x 0.66 kW) Profile scraper unit 08.519 Flat scraper unit 08.50 Buffing unit 08.612 (2 x 0.25 kW)

Gamybos metai: 2011, Sąlyga: labai geros būklės (naudotas), I am selling a stacking / destacking unit MEINERT (IMA Group) P620 E/S - 2500 / 1300 system, year of manufacture 2011. Stacking unit with one-sided guiding / also suitable for pallets. Vacuum system (with pump) Rotary head Automatic loading. Infeed table with motorised roller conveyor system Outfeed table on the floor with lifting mechanism, motorised roller conveyor system Front outfeed table with roller system Outfeed feed roller station for stacked material. Complete safety fencing! Operating capacity: Approx. 16 cycles/min Panel height: 10 - 50 mm Min. panel size: 250 x 320 mm Max. panel size: 1300 x 3000 mm Total footprint: L. 10,200 mm x W. 8,700 mm Total connected load: 45 kW Hjdpsh Hp Dtofx Af Ijfb Year of manufacture: 2011 Available immediately. Ready for operation, inspection possible. Comes with CE certificate and full documentation.

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 008301, Pozicija 1: Kantų klijavimo staklės Charge 1 IMA - SIRIO-NOVIMAT/I/R75/1000/R3 Pozicija 2: Iškrovimo įrenginys IMA - SIRIO-NOVIMAT/I/R75/1000/R3 Hfodpfx Aox A Tmmsf Ieb

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, veikimo valandos: 22 000 h, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 8 000 mm, X ašies padavimo greitis: 20 m/min, bendras ilgis: 8 600 mm, ruošinio aukštis (maks.): 60 mm, bendras plotis: 1 700 mm, briaunos storis (maks.): 3 mm, bendras aukštis: 1 850 mm, bendras svoris: 4 400 kg, suslėgto oro jungtis: 7 juosta, aukščio reguliavimo tipas: elektrinis, įėjimo įtampa: 400 V, įėjimo srovė: 54 A, produkto aukštis (maks.): 60 mm, slėgis: 7 juosta, IMA ICOSTS valdymas, lietimui jautrus valdymo skydelis, briaunų sandėlis, 2 purškimo įrenginiai, preliminarus frezavimas, pašildymo zona, nupjovimo pjūklas, tiesiojo ir spindulio frezavimo agregatai, galų užapvalinimo agregatas, ciklinimo agregatas, glotninimo agregatas, poliravimo agregatas. Hfjdpfx Aexctwrof Isb Pramoninis įrenginys labai geros techninės būklės, nuolat palaikomas operacinis paruoštumas. Naudotas tik vienoje pamainoje. Įrenginys naudotas tik kaip pagalbinė stotis padidėjus užsakymų apimtims. Susidomėjusiems galiu atsiųsti veikiančios mašinos vaizdo įrašą ir daugiau nuotraukų.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2009, Year of manufacture: 2009 Manufacturer: IMA Technical condition: Good, regularly serviced. Pre-milling cutters: New, installed about a month ago, diamond-tipped. Flat scrapers: Replaced with an upgraded version, as shown in the attached photos. Hfsdpfxsrur Uro Af Ijb Technical documentation: Available in PDF format if required. Additional information: The machine operates efficiently thanks to the newly installed pre-milling cutters, which have only been in use for about a month. The flat scrapers have also been upgraded, with the improved version clearly visible in the attached images. For more information or to arrange an inspection, please feel free to contact us by phone. Technical documentation in PDF format is also available to ensure complete transparency regarding the machine's specifications and operation.

Sąlyga: naudotas, Milling and chamfering unit Manufacturer: IMA Hfsdpfsbxp Nusx Af Ijb - for double-sided edge banding machine (1 unit left side / 1 unit right side)

Sąlyga: beveik kaip naujas (parodų įrenginys), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness for rolls (min/max) mm 0.3 / 3 – for strips mm max 1 Panel thickness (min/max) mm 8 / 60 (Laser – max 44) Control ICOS Open Feed speed m/min (adjustable) 16 – 30 Top pressure driven by V-belt Spraying unit (for liquid non-stick) Adjustable fence, CNC controlled Panel infeed system 700.101 (mm 500 x 500) Jointing cutter unit with CNC control 08.379 (Kw 4.0 x 2) Edge pressing zone (CNC controlled) Gluing unit (P.U.R. adhesive + premelter) 04.0836 + 283.1518 (edge feed servo motor) adjustable via CNC Glue application unit (premelter with laser) Laser System IMALUX Spraying unit (for separating agent) Hodpfxsgbug No Af Isfb Pressure zone + edge magazine for rolls (compartment No.) 6 Cross-cut saw unit Linear 08.428 LKA V30/2 (Kw 0.2 x 2) speed up to 30 m / min (0° - 25°) Multi-profile milling unit (CNC controlled) 08.0587 (Kw 1.0 x 2) 4 profiles Contour milling unit (for fine milling) CNC controlled KFA 20 (Kw 0.5 x 1) max 25 m/min Profile scraper unit DUO (4 profiles) Flat scraper unit 08.521 Spraying unit (for polishing fluid) Buffing unit 08.617-4 (Kw 0.18 x 4) Universal milling unit for grooving/rebating and profiling 2x08.190 (Kw 4.5 x 2) 90°/180°/270° (CNC)

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 006089, Type of applied edge: thin edge, thick edge, solid wood Glue system: EVA Hfjdpfxeim S Hqs Af Iob Premilling: yes Multifunction unit: yes Maximum feed speed: 30 m/min Maximum panel thickness: 60 mm Working units: 8 pcs

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, One-sided IMA NOVIMAT / CONTOUR / I / G80 / 790 / L20 edge banding machine for narrow edges, equipped with a servo-driven MFA corner copying unit Year of manufacture: 2009 Condition: Very good - Robust machine frame to which individual processing units are mounted. - Feed speed electronically adjustable from 6–30 m/min (the operating speed of individual processing units is not synchronized with the full feed speed range). - Feed chain guided in slideways with plastic wear plates and 80 mm wide rubber covering. - Automatic feed chain lubrication controlled by machine program. - Upper pressure unit made with a double V-belt, 70 mm wide, guided on ball bearing rollers; electronic height adjustment of the pressure unit. - Machine safety devices compliant with CE certification. - Soundproof and safety enclosures. - Edge banding unit with drive enclosed in sealed oil bath with glue pot (1 main driven pressure roller + 5 auxiliary rollers); pneumatic Quick-Lock glue pot system enables rapid exchange. - Touch screen display. - End trimming saw unit for trimming excess edging on both front and rear panel corners, features include: pneumatic saw tilting adjustment 0–25°, straight and bevel cuts, automatic saw positioning for two different edge thicknesses (e.g. 0.4 and 1.2 mm), and trimming excess for corner copying. - All processing units equipped with chip extraction. - Novimat Contour series edge banders, thanks to the powerful corner copying unit and short piece gaps (~300 mm), maintain very high machining quality. Basic technical data: - Coil edge thickness: 0.3 – 3 mm - Paper, PVC, and ABS edging: 0.3–3.0 mm - Veneer: 0.5–3.0 mm - Solid wood strips: 0.8–20 mm - Edge height: 14–65 mm - Maximum edge overhang at the top: Hfsdpfx Aow R S Slsf Ijb • up to 8 mm edge thickness – 5 mm • above 8 mm – 2 mm Workpiece dimensions: - Minimum length in feed direction: 150 mm - Minimum workpiece width (at thickness up to 25 mm): 65 mm - Minimum thickness: 8 mm (without flat scraper) or 12 mm (with flat scraper) - Maximum thickness of workpiece: • without corner copying: max 60 mm • with corner copying: max 40 mm - Smallest workpiece: 150 × 150 mm or 65 × 300 mm (note: * 65 mm for max thickness 25 mm) Machine technical specifications: - Electronic feed speed control: 6–30 m/min (note: feed rate may be limited by processing units) - Workpiece overhang from feed chain: • 38 mm (incl. edge thickness 0.3–8 mm) • 30 mm (incl. edge thickness 8.1–20 mm) Power supply: - Voltage: 400/230 V, +5/–10 % with neutral - Frequency: 50 Hz - Control voltage: 230 V AC / 24 V - Compressed air: 8 bar - Extraction air speed: 28 m/s

Sąlyga: labai geros būklės (naudotas), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 horizontal upper support beam (on which the carriage glides) No. 1 motorized carriage with horizontal metal arms No. 2 external roller conveyors for the discharge of the panel stack from the unloader No. 1 external motorized roller conveyor at the stacking area Separate electrical control panel Perimeter safety fencing Performance (cycles/minute): approx. 16 Min/Max panel thickness (mm): approx. 10 / 50 Min. panel dimensions (mm): approx. 250 x 320 Max. panel dimensions (mm): approx. 1300 x 3000 Hedpfx Afjwbp Nwo Iofb Total connected load (kW): 80

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 005657, Pridedamos briaunos tipas: plona briauna, stora briauna Klijavimo sistema: PUR Sujungimo frezavimas: taip Hfedpfx Afswcx Tus Iob Multifunkcinis agregatas: taip Viršutinis frezavimo agregatas: taip Maks. tiekimo greitis: 30 m/min Maks. plokštės storis: 60 mm Darbo agregatai: 13 vnt.

Sąlyga: labai geros būklės (naudotas), Single-sided edge banding machine (LEFT) Edge thickness in rolls (min/max) mm 0.3 - 3 Edge thickness in strips (min/max) mm 3 - 12 Panel thickness (min/max) mm 8 - 60 Control system: ICOS open TS Feed speed m/min (adjustable) 4 - 20 Top pressure: driven by V-belt Spraying unit (for liquid anti-adhesive) Jointing cutter unit 08.376 (2 x 3 kW) Hodpfxod Nuu Hs Af Iefb Gluing unit (hot melt adhesive) 283.1513 Edge pressure zone Edge magazine for rolls (compartment no.) 1 End trimming unit 08.415 (2 x 0.66 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° Multi-function unit (radius milling and profile milling unit) 08.342 (2 x 0.66 kW) servo Profile scraping unit 08.519 Flat scraping unit 08.50 Buffing unit 08.612 (2 x 0.25 kW)

Sąlyga: labai geros būklės (naudotas), ONE-SIDED EDGE BANDING MACHINE (LEFT) Roll material (edges) thickness (min/max) mm: 0.3 - 3 Hsdpjm Udfwjfx Af Iefb Edge thickness in strips (min/max) mm: 1 Panel thickness (min/max) mm: 8 - 60 Control: ICOS Open Compact Feed speed m/min (adjustable): 6 - 30 Top pressure: V-belt driven Spray unit (for liquid non-stick) Adjustable stop ruler, CNC controlled Jointing unit with CNC-controlled 08.378 (2 x 4.5 kW) Lamps for heating workpiece sides Gluing unit (hot melt glue + pre-melter) 04.1570 Spray unit (for separating liquid) Edge pressure zone Edge magazine for rolls (No. of compartments): 16 End trimming unit 08.42/30/B (2 x 0.66 kW - pneumatic 0° - 25°) 30 m/min Multi-profile milling unit (CNC controlled) 08.0587 (2 x 1 kW) Spray unit (for sliding liquid) Contour milling unit (for fine milling) CNC controlled KFA 30 (08.355 - 1 x 0.5 kW) 30 m/min Shaping unit (copying) 08.604 (4 x 0.25 kW) brush Multi-profile scraper unit (CNC controlled) 08.516 Flat scraper unit 08.521 Spray unit (for polishing liquid) Buffing unit 08.617 - 4 (4 x 0.18 kW) Finishing unit 08.53

Sąlyga: labai geros būklės (naudotas), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness in strips (min/max) mm: 0.8 / 20 Panel thickness (min/max) mm: 8 / 60 Control: ICOS Open Compact Feed speed m/min (adjustable): 6 - 30 Top pressure: belt-driven Adjustable guide fence: CNC-controlled Hodpfx Afsidqphj Iefb Jointing unit with CNC-controlled 08.376 (Kw 4.5 x 2) Lamps for heating the workpiece edge Gluing unit (Hot Melt + Pre-melter) 283.1513 + 283.201 Edge pressure zone Edge magazine for rolls (compartments No.): 1 End trimming unit 08.42 (Kw 0.66 x 2) max 30 m/min, 0°-25° Milling unit 08.055 (Kw 1.85 x 2) 0°-30° Sprayer unit (for sliding fluid) Contour milling unit (for fine milling) CNC-controlled 08.348 (KW 0.66 x 2) 4 profiles Profile scraping unit 08.516 (4 profiles) Flat scraping unit 08.50 Sprayer unit (for polishing fluid) Buffing unit 08.612-2 (Kw 0.25 x 2) Universal milling unit for grooving, rebating, and profiling 08.183 (Kw 3 x 1)

Sąlyga: labai geros būklės (naudotas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Roll material (edges) thickness (min/max) mm: 0.3 / 3 Veneer edge application possible up to max. 1.0 mm (with limitations) Panel thickness (min/max): 8 mm – 40 mm (with MFA) / 60 mm (without MFA) Control / Software: ICOS Open Feed speed (adjustable) m/min: 6 – 30 Upper pressure system with motorized timing belt Spraying unit (for liquid anti-adhesive) Adjustable stop ruler Jointing unit - 08.378 (2 x 4.5 kW) Gluing unit (hot melt adhesive) 04.1570 Pressure zone Edge magazine for rolls (compartment no.): 2 End trimming unit 08.42/30/B (2 x 0.66 kW) 0°-25° (max. 30 m/min) Milling unit 08.055 (2 x 1 kW) 0°-30° Multifunctional unit (radius milling and contour milling unit) 08.342 NC-controlled (2 x 0.66 kW) servo Profile scraper unit 08.519 Flat scraper unit 08.50 Buffing unit 08.617 (2 x 0.25 kW) Hjdpfx Afer Ttfls Iefb Universal milling unit for grooving, rabbeting, and profiling 08.190 (1 x 4.5 kW)

Sąlyga: labai geros būklės (naudotas), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 / 3 - in solid strip mm max 1 Panel thickness (min/max) mm 14 / 60 (LASER - Max 50) Control ICOS Open Feed speed m/min (adjustable) 6 - 30 Top pressure driven by V-belt Spray unit (for liquid release agent) Adjustable stop ruler CNC controlled Panel infeed system Jointing milling unit with CNC control 08.378 (2 x 4.5 kW) Edge pressure zone (CNC controlled) Hjdji Hn Srspfx Af Iefb Gluing unit (PUR glue + pre-melter) 283.201 + 283.203 Gluing unit (pre-melter with laser) Laser System LASERLINE Spray unit (for separating agent) Pressure zone + edge magazine for rolls (compartments no.) 36 + 12 End trimming unit 08.428 (0.2 kW x 2) Speed up to 30 m/min (0° - 25°) Pre-milling unit 08.0555 HS/LS1 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 1) 4 profiles Contour milling unit (for fine milling) CNC controlled KFA 30 (0.5 kW x 1) max 30 m/min Multi-profile scraper unit (CNC controlled) 08.0516 (4 profiles) Flat scraper unit 08.521 Spray unit (for polishing liquid) Buffing unit 08.614 (0.25 kW x 4) Universal milling unit for grooving/rabbetting and profiling 2x08.190 (4.5 kW x 2) 90°/180°/270° (CNC)

Sąlyga: labai geros būklės (naudotas), FLEXIBLE BATCH SIZE-1 PRODUCTION AND SINGLE-SIDED EDGE BANDING & FORMATTING LINE Comprising the following machines: M.01) LOADING TABLE AND AUTOMATIC WORKPIECE RETURN SYSTEM "SIRIO" BATCH SIZE ONE M.02) SINGLE-SIDED (right) FORMATTING AND EDGE BANDING MACHINE "IMA" Novimat I/R75/690/R3 Panel thickness (min/max) mm 8 / 60 - Working width (min/max) mm 200 / 1300 Edge material (rolls) thickness (min/max) mm 0.3 / 3 Control/software ICOS Open (Batch Size One) Feed rate (adjustable) m/min 6 - 30 Hodpekt Uuasfx Af Isfb Fully automatic panel infeed system for formatting A1 / 15 No. 2 jointing milling units, NC controlled 08.378 (4 motors x 4.5 kW) Gluing unit (Hot melt glue + pre-melter) VTG + 283.205 Edge magazine for rolls (24 positions) End trimming unit 08.42 / 30 / B / LS1 (2 x 0.2 kW) 0°-25° Pre-milling unit 08.055.0.1680 (1 x 0.85 kW) Multi-profile milling unit (NC controlled) 08.0587 HS/LS1 (2 x 1 kW) Contour milling unit (for fine trimming) NC controlled KFA x20 (1 x 0.5 kW) 20 m/min Multiple profile scraper unit (NC controlled) 08.516 HS/LS1 Flat scraper unit 08.521 Buffing unit 08.617-2 (2 x 0.18 kW) No. 3 universal milling units for grooving, rebating and profiling 08.190 (3 x 4.5 kW) NC controlled - 90°/180°/270° M.03) FEEDING AND STACKING SYSTEM "SIRIO"

Sąlyga: labai geros būklės (naudotas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 - 3 Panel thickness (min/max) mm 8 - 60 Control system: ICOS open compact Feed speed m/min (adjustable) 6 - 30 Top pressure belt-driven, spraying unit (for liquid anti-adhesive) Panel infeed system A1 / 15 Adjustable guide fence CNC-controlled. Panel infeed system Barcode reader Jointing milling unit with CNC control 08.379 (2 x 4.0 kW) Radiator for edge heating of workpieces Gluing unit (P.U.R. glue + premelter) VTG + 283.203 Edge pressing zone. Edge height adjustment – CNC-controlled. Edge magazine for rolls (compartment no.) 12 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°-25°) 30m/min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC-controlled) 08.0587 (0.66 kW x 2) 4 PROFILES HSK 25 Spraying unit (for sliding liquid) Contour milling unit (for fine milling) CNC-controlled KFA x30 (0.5 kW x 1) 30m/min Multi-profile scraper unit (CNC-controlled) 08.516 (4 PROFILES) Hfodpfx Afjltmnlo Ijb Flat scraper unit 08.521 Spraying unit (for polishing liquid) Buffing unit 08.617 (0.18 kW x 4). Open space Universal milling unit for grooving/rabbetting and profiling 08.190 (4.5 kW x 1)

Sąlyga: labai geros būklės (naudotas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 / 3 Edge thickness in strips (min/max) mm 3 / 12 Panel thickness (min/max) mm 8 / 60 Control ICOS open TS Feed speed m/min (adjustable) 4 – 20 Top pressure belt-driven Spray unit (for liquid non-stick agents) Adjustable stop ruler CNC-controlled Jointing cutter unit 08.379 (2 x 4.0 kW) Gluing unit (hot-melt glue & PU adhesive) 283.1513 Edge pressure zone (CNC-controlled) Edge magazine for rolls (compartment no.) 1 End trimming unit 08.415 (2 x 0.66 kW) Premilling unit 08.055 (2 x 1.0 kW) Profile milling unit (copying) SKF-L (CNC) 2 x 0.18 kW + 2 x 0.4 kW Profile scraper unit 08.519 Flat scraper unit 08.521 Buffing unit 08.617-2 (2 x 0.18 kW) Universal milling unit for grooving, rebating, and profiling 08.190 (1 x 4.5 kW) 90°-180°-270° OPTIONAL: Infeed table 65.152 (mm 500 x 500) The return system “GELDMEIER” Model ? (Ref. No. Z02009) Hfedod Nt N Hspfx Af Ieb