LOS-1 KRAŠTO APKLIJAVIMO MAŠINA

IMA Novimat / I / G80 / 540 / R3

Sąlyga: geras (naudotas), Gamybos metai: 2011, mašinos/transporto priemonės numeris: 08420, Funkcionalumas: visiškai funkcionalus, briaunos storis (maks.): 3 mm, bendras ilgis: 11 500 mm, bendras svoris: 8 500 kg, suslėgto oro jungtis: 7 juosta, Used single-sided IMA edge banding machine for straight edges; designed for jointing, gluing, and post-processing of various edge materials. Fixed fence side on the right. Workpiece and material dimensions: - Min. workpiece length: 150 mm - Min. workpiece width: 65 mm - Min. workpiece thickness: 8 mm - Max. workpiece thickness: 40 mm (with corner rounding/copying) - Max. workpiece thickness: 60 mm (without corner rounding/copying) - Smallest workpiece: 150 x 150 mm or 300 x 65 mm - Workpiece overhang: 38 mm - Edge thickness min/max: 0.3 – 3.0 mm - Edge width min/max: 14 – 65 mm EQUIPMENT / SPECIFICATION - Base machine - Workpiece transport with 80 mm wide feed chain (chain plate width) - Feed rate 6 to 30 m/min, infinitely variable via control unit - Top pressure with spring-loaded guide rollers and 70 mm wide composite V-belts - Automatic height adjustment (workpiece thickness) - Workpiece support with extendable roller rails, up to approx. 600 mm - IMA 63.152 feed table, 500 x 500 mm, for safe and square feeding of long and narrow parts - Manual infeed device, pivotable up and down, with 5 driven inclined rollers from above - Adjustable infeed fence with NC axis Nkedpfxswyp Nuj Agisu UNITS / EQUIPMENT - JOINTING UNIT IMA 08.378, 2 motors each 4.5 kW, with engagement control, tool Ø 125 mm, electronic horizontal positioning - GLUING SECTION 04.1570 Concept, driven glue roller with auto-stop in case of malfunction, quick-lock system for glue application unit, glue roller lift at feed stop, edge infeed control via fiber optics, hold-down with stepper motor adjustment - Automatic PUR melting system IMA 283.203 - Edge magazine with automatic 6-roll changer POST-PROCESSING SECTION - End trimming unit IMA 08.42, horizontal working movement, 2 motors each 0.65 kW, 200 Hz, for straight and bevel trimming, max. working speed 30 m/min - Fine trimming unit IMA 08.055, 0.66 kW 400V 200Hz, top/bottom, HSK 25 - Corner rounding (copying IMA) 08.348, 2 motors 0.66 kW 400V 200 Hz, HSK 25, max. working speed 20 m/min - Profile (radius) scraper 08.516, top/bottom, for multi-profile tools, automatic positioning via stepper motors. Up to 4 profiles, electro-pneumatic in/out engagement. - Spray unit for cleaning agent - Flat scraper 08.521 (glue joint), top/bottom - Profile (corner) buffing unit 08.604, 4 motors - Buffing unit 08.617, top/bottom CONTROL / SOFTWARE: • Control system ICOS Open Compact • Edge tracking control • Uninterruptible power supply (UPS) • Power supply 400 V, 50/60 Hz, control voltage 24 VDC / 230 VAC Machine dimensions L 1150 x W 300 x H 260 cm Availability: Approx. October 2025

Gamybos metai: 2026, Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Saugiai ir atsakingai pakuokite – laiku. Kartono pjaustymo mašina CORBOX gamina aplinką tausojančias pakuotes. CORBOX visiškai automatizuotai ir tiksliai pagal poreikį gamina individualių matmenų kartonines dėžes. Dinamiško proceso metu žaliavos naudojamos atsakingai, todėl ženkliai sumažinamas pakuočių ir užpildo medžiagų poreikis. Su CORBOX gaminkite būtent tokią pakuotę, kokios jums reikia – optimalios formos, maksimaliai išnaudojant tūrį ir už mažiausią vieneto kainą. Nodpfxokthnco Agieku

Sąlyga: geras (naudotas), Gamybos metai: 2007, Technische Merkmale: - Maximale bearbeitbare Länge: 3.200 mm - Minimale bearbeitbare Länge: 200 mm - Maximale Breite: 200 mm - Minimale Breite: 40 mm - Maximale Werkstückhöhe: 130 mm - Tiefe bei max. Zapfendurchmesser 320 mm: 105 mm - Zapfenwagen-Geschwindigkeit min./max.: 0/100 m/min - Min./max. Profiliergeschwindigkeit: 3/15 m/min Zapfenbearbeitung: 1. Endabschneidsäge - 5,5 PS (4 kW) - Sägeblatt-Ø 400 mm 2. Zapfenfräser - Gegenlager 50 x 620 mm - 15 PS (11,3 kW) - Max. Werkzeug-Ø 320 mm - Achshub 575 mm - Automatischer Splitterschutz 3. Zapfenfräser - Gegenlager 50 x 620 mm - 15 PS (11,3 kW) - Max. Werkzeug-Ø 320 mm - Achshub 575 mm - Automatischer Splitterschutz - Vertikale Positionierung mit durchgehender Achse 4. Digitale Winkeleinstellungsspannung Profilieren: 5. Rechtsprofilfräse - Welle 50 x 320 mm - 10 PS (7,5 kW) - Werkzeug-Ø 130/240 mm - Achshub 280 mm - Zeitverzögerte Splitterschutzvorrichtung bei Kalibrierung Njdpfxst R T Hcs Agijku - Doppelte Drehrichtung - Vertikale und horizontale Positionierung mit durchgehender Achse 6. Rechtsprofilfräse - Welle 50 x 320 mm - 10 PS (7,5 kW) - Werkzeug-Ø 130/240 mm - Achshub 280 mm - Vertikale und horizontale Positionierung mit durchgehender Achse 7. Rechtsprofilfräse - Welle 50 x 320 mm - 10 PS (7,5 kW) - Werkzeug-Ø 130/240 mm - Vertikale und horizontale Positionierung mit durchgehender Achse 8. Abschluss-/Aufnahmestation - Vertikale und horizontale Positionierung mit durchgehender Achse - Vorrichtung zum Ausziehen des Fensterladens - Hfutwt78Z 9. Untere horizontale Nutwelle - Vertikale und horizontale Positionierung mit durchgehender Achse - 88,5 PS (66,4 kW) 10. Digitale Führung 11. Teile-Rückführung zum Bediener

Sąlyga: naujas, Geriausia kaina: 4499 Eur (EXW Jonava, Lietuva) Stumdomo stalo matmenys – 2200 x 375 mm Didžiausias apdirbimo ilgis – 1500 mm Atstumas tarp pjūklo disko ir išilginės liniuotės – 1140 mm Pjūklo disko skersmuo – 400 mm Pjovimo aukštis (90°) – 115 mm Pjovimo aukštis (45°) – 105 mm Pagrindinės ašies apsisukimų skaičius – 4500/6000 aps./min Pagrindinės ašies skersmuo – 30 mm Pjūklo disko pasukimo kampas – 0–45° Pjūklo disko pakėlimas/nuleidimas – elektrinis valdymas Pagrindinio variklio galia – 5,5 kW Įpjovimo pjūklo disko skersmuo – 120 mm Njdpfxednxyde Agisku Įpjovimo disko apsisukimų skaičius – 7000–8000 aps./min Įpjovimo veleno skersmuo – 20 mm Įpjovimo variklio galia – 1,1 kW Svoris: 700 kg * Naudojant 400 mm disko pjūklą, mažesnį diską reikia nuimti. Sumažintam pjūklui rekomenduojama nenaudoti didesnio nei 350 mm pagrindinio apsauginio gaubto.

Sąlyga: naudotas, Gamybos metai: 2019, Used machine Year of manufacture: 2019 Nksdowka Upepfx Agieu Equipment and technical data: - Designed for classic nesting machining with wear plate - Machine frame in welded construction with ground and hardened prism guides for the gantry, aggregate head, and consoles - Gantry-type carriage - Helical rack and pinion drive in X and Y axes, ball screw drive in Z axis for precise positioning - Machining dimensions: - Maximum support surface on nesting table: X = 3100 mm, Y = 1560 mm - Maximum travel ranges: X = 4695 mm, Y = 2100 mm, Z = 293 mm - Maximum clearance height DYNESTIC table: Z = 100 mm from table top (without wear plate) - Maximum programmable speed - Vector speed: 128 m/min - X = 80 m/min, Y = 100 m/min, Z = 25 m/min - DYNESTIC table: - Fixed, continuous machining table with grid division - Continuous grooves in X and Y directions - Groove spacing: 50 mm - Includes 25 meters of sealing cord for clamping the wear plate - Vacuum zones: single-circuit vacuum system - Drill unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - U-shape arrangement - 5+4 in X and 4 in Y direction - 32 mm grid - Max. drill diameter: 35 mm - Total drill length: 70 mm from mounting end (depending on panel thickness) - Spindle stroke: 70 mm - Rotational direction: alternate CW/CCW - n(max): 1000 - 4400 rpm, infinitely variable - Mounting: M10 thread, locating seat 11 mm - Without tools, without collets - 6 horizontal spindles: - 2 twin drill spindles in X direction - 1 twin drill spindle in Y direction - Mounting: M10 thread, locating seat 11 mm - Max. drill length: 63 mm from mounting end - Without tools, without collets - Milling unit 7842: - Power: 12.0 kW (S6) - n(max) = 1000 - 24000 rpm, infinitely variable - Maximum output at 12000–24000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand rising locknut (for right-rotating tools) - With collet chuck for HSK shank - Ceramic ball bearings (hybrid) - Tool weight max. 6 kg (including holder) - Tools: milling and grinding tools max. Ø 160 mm - Safety guarding in accordance with CE standards - Safety fence at sides and rear - Vacuum pump: 500 m³/h, dry-running - Personnel safety by light barriers in the front machine area - Handheld remote control with the following functions: - Start/stop of machining programs - Machining cycle speed control - Reset button - Manual feed / rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software, 1x machine license including: - CAMPUS NC-HOPS: - Graphical variant system with WOP and CAD/CAM features for creating part variants using macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication according to defined intervals - Additional sealing against dust via positive pressure in each guide carriage

Sąlyga: labai geros būklės (naudotas), TECHNISCHE DATEN NICHT VON DIESER MASCHINE Rücklaufeinrichtung für Kantenanleimmaschine (LINKS) Nkjdpsff R Tqsfx Agisu In Kombination mit einer einseitigen Kantenanleimmaschine ermöglicht sie einem einzelnen Bediener die kontinuierliche Beschickung der Maschine. Luftschleierbank, Einlauf und Auslauf (Gesamtabmessungen 3.520 x 2.560 mm) 180°-Transfer (3.120 x 2.140 mm) mit motorisierten Rollenbahnen und motorisierten Bändern Motorisierte Fördermatte (9.080 x 1.560 mm) Werkstückmaße (MIN/MAX): Länge – 240 mm / 2.800 mm Breite – 120 mm / 1.300 mm Dicke – 8 mm / 60 mm, optional bis 100 mm

Sąlyga: naudotas, Gamybos metai: 1993, Häwa rąstų žievės šalinimo staklės su frezavimo galva H249 / 1000 Pagaminimo metai: 1993 Rąsto skersmuo 0,25 m – 1,2 m Rąsto ilgis 1,8 m – 7 m Frezos galva 30 kW Šaknų mažintuvas 37 kW Sudėtis: Skersinis pavaros konvejeris Žievės šalinimas Konvejeriniai juostiniai transporteriai Nsdpsx Rv T Iefx Agioku Išvežimo konvejeris

Sąlyga: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, The Cormak MJ45-KB4 panel saw with scoring unit is an advanced woodworking machine, commonly referred to as a panel saw with scorer. This is an ideal solution for cutting and processing various types of materials, primarily wood, chipboard, MDF boards, and other wood-based materials. Nsdpfx Astz Smisgieku Construction and Design: The Cormak MJ45-KB4 is a robust woodworking machine featuring a durable steel frame, ensuring stability during operation. The large work table, guided on hardened steel rods and offering a carriage length of 3200 mm, with integrated cutting units, guarantees both efficiency and accuracy. Main Cutting Unit: Scoring Unit: A key feature of this saw is the scoring blade, which relieves internal stresses in the wood by scoring the underside of the workpiece. This reduces the risk of cracking and deformation after cutting. The 0.75 kW scoring motor ensures reliable scoring operations. Main Saw Blade: The Cormak MJ45-KB4 is equipped with a circular saw blade as the main cutting tool. The electric motor drives the saw blade, enabling precision cutting. With a blade diameter of 350 mm, the maximum cutting height is up to 105 mm. Manual Scoring Adjustment: Easy and effective manual scoring adjustment allows for quick and precise tool settings. Adjustable stops make it easy to return to previous settings, and the intuitive control location at the operator’s workstation allows adjustments without work interruption. Features and Advantages of the Panel Saw: - Large working area: The panel saw has a spacious working surface, facilitating handling of large material sheets. - Smooth feed: The feed system utilizes precision-hardened steel guides and ball bearings, which ease longitudinal cutting of long panels or plywood sheets. - Angle and cutting depth adjustment: Adjustable angle and cutting depth enable the tool to be tailored to specific project requirements. - Safety features: The panel saw is equipped with safety devices, including blade guards and emergency stop systems to ensure safe operation. Applications of Panel Saws with Scoring Unit: Panel saws with a scoring unit are mainly used in the woodworking and window manufacturing industries for cutting wood and wood-based materials. They are ideal for cutting boards, chipboard, MDF panels, and similar materials. The Cormak MJ45-KB4 is a professional tool distinguished by high precision. Technical Specifications Table dimensions: 990 x 575 mm Sliding table length: 3200 mm Cutting width with rip fence: 1250 mm Crosscut with crosscut fence: 3100 mm Blade tilt: 0° - 45° Saw blade diameter: Ø350 mm Main blade bore: Ø30 mm Blade height: 0-105 mm Blade height at 45°: 0-73 mm Main saw spindle speed: 4000 / 6000 rpm Scoring blade diameter: Ø125 mm Scoring blade bore: Ø20 mm Scoring spindle speed: 8000 rpm Main motor power S1/S6: 5.5 kW / 9 HP Scoring motor power S1/S6: 0.75 kW / 1.2 HP Dust extraction port under table: 100 mm Dust extraction port at blade guard: 80 mm Machine weight: 680 kg Saw delivered without saw blades. Price not valid for machines sold in Poland.

Sąlyga: naujas, Gamybos metai: 2026, Korpusų tvarkymo sistemų komplektavimas rankinėms, pusiau ar visiškai automatizuotoms korpusų surinkimo linijoms visada atliekamas atsižvelgiant į kliento reikalavimus. Nodpfsdx R D Dox Agijku Korpusų surinkimo linijų, kurios palengvina darbą, sumažina perstatymo laiką ir padidina gamybos pajėgumą, privalumus mielai paaiškinsime asmeninio pokalbio metu.

Sąlyga: naujas, Typ: SK-1000-P6 Arbeitsbreite: 1000 mm Minimale Werkstücklänge: 500 mm Arbeitshöhe: 2–150 mm Polierwalzengeschwindigkeit: frequenzgeregelt Vorschubgeschwindigkeit: 3–12,5 m/min Gesamtanschlussleistung: 13,87 kW Scheibenmotor: 1,5 kW × 1 Querwalzenmotor: 1,5 kW × 1 Schraubwalzenmotor: 2,2 kW × 2 Vorschubmotor: 2,2 kW Hubmotor (oben/unten): 0,37 kW × 4 Schenkelschwenkmotor: 0,37 kW × 2 Arbeitstisch-Hub: 0,55 kW Nsdjdmi Niepfx Agisku Transportabmessungen (L×B×H): 3650×1850×2100 mm Gewicht: 4200 kg