Hsm 500 Vl pirkti naudotą (52)

Sąlyga: geras (naudotas), Gamybos metai: 2012, veikimo valandos: 12 078 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 88 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 800 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 750 kg, bendras svoris: 30 000 kg, alyvos bako talpa: 2 000 l, galia: 98 kW (133,24 AG), tūrio srautas: 643 m³/val, Technical Data – Baler: Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 R-FU Year of Manufacture: 2012 Total Operating Hours: 12,078 hours (as of September 2025) Pump Operating Hours: 6,616 hours (effective pump runtime) Number of Bales Produced: 65,792 bales (as of September 2025) Main Pressing Force: 880 kN Specific Pressing Force: 120 N/cm² Shear Edge Press-Out Force: 120 kN Feed Opening Dimensions: 970 x 1,800 mm Theoretical Idle Cycle Time: 8.3 seconds Theoretical Throughput Capacity: 643 m³/hour Bale Dimensions: 1,100 x 750 mm, length variable from 600 up to 2000 mm Drive Power: 2 x 45 kW, frequency-controlled Connected Load: 98 kW Total Power Consumption: 192 A Fuse Protection: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Throughput Rates at Bulk Density: - 20 kg/m³: 12.86 t/hour - 50 kg/m³: 32.15 t/hour Bale Weights at approx. 1.2 m Bale Length: 650 up to 750 kg/bale, depending on material Hydraulic Oil Tank Volume: 2,000 L HVI 46 PLC Control: Siemens S7-300 Operating Panel: Siemens TP 700 Press Dimensions (assembled): 18,000 x 4,300 x 3,270 mm (L x W x H) Installation Dimensions with Conveyor System: 18,000 x 22,000 x 5,765 mm (L x W x H) Weight (approx.): 30 t (main press approx. 20 t, press channel with bale clamp approx. 10 t) Special Machine Equipment: Lredpfexcngnjx Af Ieg • Access lock by key transfer system • Electro-hydraulic locking of the press carriage during the tying process to prevent the press ram from moving position with highly expansive materials Additional Ordered Special Equipment: • Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to standard 2 x 45 kW drive system at identical performance output • Manual switching on/off for number of wire ties to save tying wire for non-expansive materials • Shear edge press-out with 121 kN pressing force • Sensor-based wire monitoring; machine stops on wire break or end of wire • Bale chute • Optical warning signal, mounted on control cabinet Condition of the Baler: The entire press system (baler and conveyor technology) is in good, ready-to-operate condition. Technical Data – Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain Belt Conveyor KF 1800 Year of Manufacture: 2012 Drive Power: 7.5 kW Belt Speed: 0.05 – 0.4 m/sec Feed Belt Length: 6,000 mm Feed Belt Sidewall Height: 400 mm Incline Belt Length: 9,000 mm Incline Belt Sidewall Height: 800 mm Gooseneck Length: 1,500 mm Incline: 30° Nominal Width: 1,800 mm Usable Width: 1,700 mm Belt Quality: EP-500/4 Steel Carriers on Rubber Belt: 50 x 50 mm Hollow Pin Chain, Pitch 125 mm, Rollers 36 mm Drive Shaft Height above Floor: 4,284 mm Overall Conveyor Height: 5,765 mm Transport Dimensions Feed Belt: approx. 7,000 x 2,200 x 1,250 mm (L x W x H) Transport Dimensions Incline Belt: 13,000 x 2,500 x 2,900 mm (L x W x H) Pit Dimensions for Conveyor: 14,765 x 3,260 x 1,250 mm (L x W x H) Scope of Delivery: For sale: the feed conveyor, the baler with bale chute, and the wire draw stations (wire not included). Remarks: All documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is complete. Inspection is possible by appointment. We accept no liability for the technical information provided or for possible errors.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Technical data for the document shredding plant: Manufacturer: HSM GmbH + Co KG General data for the two-stage shredder system: Model: Duo Shredder 5750 Year of manufacture: 2015 Operating hours: 3,093 hours Throughput capacity: up to 800 kg/hour, depending on material Rated power: 30 kW Rated current: 62 A Particle size: 6 x 40 – 53 mm Fuse: 63 A gG/gL/C/K Shredder weight: approx. 2,500 kg Pre-shredder data: Shredder type: V 570 Cutting unit working width: 500 mm Particle cut size: 20 x 155 mm (W x L) Pre-shredder rated power: 2 x 5.5 kW Pre-shredder rated current: 2 x 11.5 A Post-shredder data: Shredder type: P 500.2 Cutting unit working width: 500 mm Particle cut size: 6 x 40 – 53 mm (W x L) Post-shredder rated power: 9.2 kW Post-shredder rated current: 18 A Security level according to DIN 66399: P-3, O-2, T-3, E-2 Baler data: Model: KP 100.1 Lsdpfx Afjwrybrj Ierg Year of manufacture: 2015 Operating hours: 2,377 hours Pressing force: 9 – 12 t Bale weight: 40 – 150 kg/bale, depending on material Cycle time: 7 – 16 seconds Filling chute dimensions: 450 x 580 mm Bale size: 630 x 500 x 400–1000 mm (W x H x L) Binding: triple, horizontal Baler dimensions: 3990 x 2225 x 1735 mm (L x W x H) Baler weight: approx. 1,000 kg Dimensions of the complete system (conveyor, shredder, and baler): 9560 x 2071 x 3550 mm (L x W x H) Functional description: This is a complete installation consisting of a feed conveyor, a two-stage shredding system, and a horizontal baler. Material is fed via the conveyor, shredded in two stages, and then pressed into stackable bales. A second cutting unit and various motors are available as spare parts with the system. Comments: Full documentation (operating manual, electrical/hydraulic diagrams) is available. Inspection possible by appointment. We assume no liability for technical data or possible errors.

Sąlyga: geras (naudotas), Gamybos metai: 2007, veikimo valandos: 8 800 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 24 t, pildymo angos plotis: 620 mm, pildymo angos ilgis: 1 000 mm, kamuolio ilgis: 1 200 mm, ryšulio plotis: 700 mm, ryšulio aukštis: 500 mm, balo svoris: 200 kg, bendras plotis: 2 825 mm, bendras aukštis: 1 940 mm, bendras ilgis: 6 250 mm, įėjimo įtampa: 400 V, galia: 9,2 kW (12,51 AG), darbinis slėgis: 220 juosta, Press capacity: 240 kN Specific press force: 64 N/cm² Drive power: 9.2 kW Voltage / Frequency: 400 V / 50 Hz Idle cycle time: 17.2 s Theoretical idle press throughput: 73 m³/h Feed opening width x length: 620 x 1000 mm Lsdpfjvq Rplsx Af Ierg Bale width x height x length: 700 x 500 x 600-1200 mm Dimensions (L x W x H): 6250 x 2825 x 1940 mm Weight: 4 t Binding material: wire Material to be pressed: film, mixed paper, cardboard, punching waste, PET bottles and aluminium cans, soft packaging

Sąlyga: naudotas, Gamybos metai: 1987, Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: 6215.101.00001B, spaudimo jėga: 12 t, Our HSM 12 Gigant is perfectly suited for environments where bulky cardboard, plastic film, or other materials need to be compacted. Thanks to its exceptionally large feed opening, the unit is easy and convenient to load. The result is compact bales that are easy to transport. And if the baler is urgently needed elsewhere in the company – no problem: its four castors ensure it can be used anytime and anywhere. Ledpfx Afow Az E To Isrg