Presas

HSM 12 Gigant

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2023, veikimo valandos: 1 851 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 70 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 400 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 500 kg, bendras svoris: 17 000 kg, alyvos bako talpa: 70 l, Technical data baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410 BS-22/50 Year of manufacture: 2023 Operating hours pump: 1,851 hours (as of July 2024) Press force: 70 t (equipped with a 70 t hydraulic cylinder, special equipment) Specific press force: 90.9 N/cm² (equipped with a 70 t hydraulic cylinder, special equipment) Feed chute dimensions: 1,400 x 1,000 mm Tedpfx Aeu Thbxefwjf Theoretical cycle time: 13 seconds Theoretical throughput: 266 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive output: 22 kW Total connected load: 65 kW Tying: 4-fold vertical, fully automatic Throughput at a bulk density of: 30 kg/m³ approx. 5.5 t/hour 50 kg/m³ approx. 7.5 t/hour 100 kg/m³ approx. 9.7 t/hour Bale weight at a bale length of approx. 1.2 m: up to 500 kg, depending on material PLC: Siemens S7-1500 Operator panel: Schneider Harmony Press dimensions installed: 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight baler: 17 t Special equipment: - Wear-resistant floor made of HARDOX steel - Larger main hydraulic cylinder with 70 t pressing force - Special press ram for compacting loose bulk materials of small particle size - OptiCut XS system for reduced cutting forces and increased throughput - Special press plunger for compacting challenging materials Technical data conveyor belt: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: KGF GB 1500 Year of manufacture: 2023 Drive output: 4.0 kW Belt speed: approx. 0.3 m/second Feed belt length: 2,679 mm Incline belt length: 6,866 mm Gooseneck length: 1,272 mm Incline: 35° Usable width: 1,400 mm Sidewall height incline belt: 800 mm Cleat height: 50 mm Cleat spacing: 750 mm Belt specification: EP 400/3, 3:1 (DIN Quality N) Overall height: 4,515 mm Transport dimensions overall: 11,148 x 2,502 mm (L x W) Technical data contactless personnel protection system: Manufacturer: BOREMA Umwelttechnik AG, Switzerland Model: APSS iBOR 22 Year of manufacture: 2023 Condition of the baling plant: Due to the low operating time of only 1,851 pump hours and the exclusive processing of paper, cardboard, and film, the entire plant is in very good condition. Scope of delivery: - Avermann baler, type AVOS 1410 BS-22/50, incl. wire tying stations and bale chute - Avermann conveyor, type KGF GB 1500 - BOREMA personnel protection system, type APSS iBOR 22 Notes: Full documentation (operating manual, CE declaration, electrical/hydraulic wiring diagram) is available. Viewing is possible by appointment. We assume no liability for the technical data or any possible errors.

Sąlyga: paruoštas naudoti (naudotas), Modelis: HSM V-press 1160 plus presavimo įrenginys Todpfxjra Nyue Afwsf Spaudimas (kN): 532 Našumas (balių/val.): 1–2 Maks. baliaus dydis (mm): 1200x1100x1000-1200 Matmenys (ilgis x plotis x aukštis, mm): 1780x1150x2985 Galia (kW): 7,5 Metai 2007-2008 kaina 5500 eur Metai 2009-2010 kaina 5800 eur Metai 2011-2013 kaina 6300 eur Taip pat turime HSM v press 1160 max presavimo įrenginių 2014-2015 metų Svoris (kg): 2300 TAIP PAT PASIEKIAMI 2017-2018 METŲ MODELIAI – 7500 eur

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, varžto skersmuo: 38 mm, This machine is in storage at Plastima Used Machinery. Tsdpfsvcqccsx Afwof

Gamybos metai: 2016, Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, HDPE film washing plant Todpjtuui Dofx Afwof Year of manufacture: 2016 0 operating hours (never put into operation) Manufacturer: NEUE HERBOLD, D-74889 Sinsheim comprising: Wet granulator, type SM 450/600-S5-2 Friction washer / friction separator, type FW 560/3000 Screw conveyor Separation tank (float-sink separation) type TB 500 Mechanical dryer, type TM 1005 Extraction unit, type MFT 55/500 Fine material separator, type HS 500 Electrical control panel

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, galia: 22 kW (29,91 AG), bendras svoris: 2 600 kg, Gamybos metai: 2006, Cutting unit width: 600 mm Cutting unit length: 1,200 mm Shaft center distance (between knife shafts): 250 mm Knife shaft rotational speed: approx. 16 rpm Knife shaft torque: approx. 17,000 Nm Todpfxetzbvyo Afwjf Feed hopper: 1,200 mm x 2,400 mm Drive power: 2 x 11 kW Total drive power: 22 kW Weight: 2,600 kg

Gamybos metai: 2006, veikimo valandos: 15 000 h, Sąlyga: geras (naudotas), For sale is an Erema 1007T. Year of manufacture: 2006 Operating hours: 15,420 Throughput capacity: 250–350 kg/h The system is currently processing HDPE but is also suitable for other plastics such as LDPE. The machine can be inspected during ongoing operation. A new extruder screw was installed in February. Todpfx Aoumubysfwef

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, Rotacinės žirklės, dviašis smulkintuvas, Variklio galia: 110 kW (2 x 55 kW), Nominali srovė: 210 A Peilio plotis: 75 mm Pjovimo mazgo dydis: ilgis 1600 mm x plotis 980 mm Greito peilių keitimo sistema, SEW reduktorius, Įskaitant hidraulinį spaudimo įrenginį, hidraulinė nominali galia: 7,5 kW, Todowva Hijpfx Afwsf Valdymo skydas, Pjovimo mazgas renovuotas, Matmenys: ilgis apie 6150 mm x plotis apie 3100 mm x aukštis apie 3150 mm, Bendras svoris: apie 17 t

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Special Price: €29,970 net One machine is available immediately. This is the ideal machine for shredding voluminous, lightweight aluminium chips or turnings. Not suitable for more solid aluminium parts. Included: + Optimized cutting geometry + Adapted pusher control + Load-dependent hydraulic pusher (which presses the chips against the cutting unit) Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Blades: 40x40mm, multiple cutting edges (reversible), Rotor diameter: 260 mm, Control system: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hopper volume: approx. 0.6 m³, Hydraulically operated pusher Screen perforation selectable (15 - 40mm) Extraction connection Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at an additional cost: - Shredder raised by 30 cm (preparation for conveyor belt) +€2,990 net - Angle conveyor (discharge height approx. 220 cm) +€9,770 net - Overband magnet +€6,980 net - Control system for conveyor and overband magnet +€2,750 net (start and stop synchronized with shredder) Tsdpfxsgmh H Tj Afwjf We are happy to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight and we will document the test with photos and videos.

Sąlyga: paruoštas naudoti (naudotas), Techniniai duomenys Dixi 60 AUTOMAT presas Tsdov Amw Nspfx Afwef Pakrovimo anga plt. x aukšt.: 1550 x 1000 mm Variklio galia: 31,5 kW Presavimo jėga: 60 t Ryšulio svoris (priklauso nuo medžiagos): 350–600 kg Ryšulio matmenys plt. x aukšt. x ilgis (reguliuojama): 1100 x 800 x 300–1600 mm Presavimo / ciklo laikas: 13/24 s Įrenginio svoris: 7000 kg

Sąlyga: Defektas atsarginių dalių laikiklis (naudotas), Gamybos metai: 2013, Manufacturer: HSM Model: HL 4010 Li Year of manufacture: 2013 Todsur Ravepfx Afwjf The equipment is incomplete and is being sold for parts. Defects: Hydraulic pump missing Control unit missing Power supply missing