Presas su konvejeriu VK 8818 R-FU

HSM GmbH + Co. KG, Germany HSM VK 8818 F-RU

Technical Data – Baler:

Manufacturer: HSM GmbH + Co. KG, Germany
Model: VK 8818 R-FU
Year of Manufacture: 2012
Total Operating Hours: 12,078 hours (as of September 2025)
Pump Operating Hours: 6,616 hours (effective pump runtime)
Number of Bales Produced: 65,792 bales (as of September 2025)
Main Pressing Force: 880 kN
Specific Pressing Force: 120 N/cm²
Shear Edge Press-Out Force: 120 kN
Feed Opening Dimensions: 970 x 1,800 mm
Theoretical Idle Cycle Time: 8.3 seconds
Theoretical Throughput Capacity: 643 m³/hour
Bale Dimensions: 1,100 x 750 mm, length variable from 600 up to 2000 mm
Drive Power: 2 x 45 kW, frequency-controlled
Connected Load: 98 kW
Total Power Consumption: 192 A
Fuse Protection: 250 A slow-blow
Tying: 5-fold horizontal, fully automatic
Throughput Rates at Bulk Density:
- 20 kg/m³: 12.86 t/hour
- 50 kg/m³: 32.15 t/hour
Bale Weights at approx. 1.2 m Bale Length: 650 up to 750 kg/bale, depending on material
Hydraulic Oil Tank Volume: 2,000 L HVI 46
PLC Control: Siemens S7-300
Operating Panel: Siemens TP 700
Press Dimensions (assembled): 18,000 x 4,300 x 3,270 mm (L x W x H)
Installation Dimensions with Conveyor System: 18,000 x 22,000 x 5,765 mm (L x W x H)
Weight (approx.): 30 t (main press approx. 20 t, press channel with bale clamp approx. 10 t)

Special Machine Equipment:
• Access lock by key transfer system
• Electro-hydraulic locking of the press carriage during the tying process to prevent the press ram from moving position with highly expansive materials

Additional Ordered Special Equipment:
• Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to standard 2 x 45 kW drive system at identical performance output
• Manual switching on/off for number of wire ties to save tying wire for non-expansive materials
• Shear edge press-out with 121 kN pressing force
• Sensor-based wire monitoring; machine stops on wire break or end of wire
• Bale chute
• Optical warning signal, mounted on control cabinet

Condition of the Baler:
The entire press system (baler and conveyor technology) is in good, ready-to-operate condition.

Technical Data – Chain Belt Conveyor:

Manufacturer: Stadler Anlagenbau GmbH
Type: Chain Belt Conveyor KF 1800
Year of Manufacture: 2012
Drive Power: 7.5 kW
Belt Speed: 0.05 – 0.4 m/sec
Feed Belt Length: 6,000 mm
Feed Belt Sidewall Height: 400 mm
Incline Belt Length: 9,000 mm
Incline Belt Sidewall Height: 800 mm
Gooseneck Length: 1,500 mm
Incline: 30°
Nominal Width: 1,800 mm
Usable Width: 1,700 mm
Credsxcngnopfx Aa Soh
Belt Quality: EP-500/4
Steel Carriers on Rubber Belt: 50 x 50 mm
Hollow Pin Chain, Pitch 125 mm, Rollers 36 mm
Drive Shaft Height above Floor: 4,284 mm
Overall Conveyor Height: 5,765 mm
Transport Dimensions Feed Belt: approx. 7,000 x 2,200 x 1,250 mm (L x W x H)
Transport Dimensions Incline Belt: 13,000 x 2,500 x 2,900 mm (L x W x H)
Pit Dimensions for Conveyor: 14,765 x 3,260 x 1,250 mm (L x W x H)

Scope of Delivery:
For sale: the feed conveyor, the baler with bale chute, and the wire draw stations (wire not included).

Remarks:
All documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is complete. Inspection is possible by appointment. We accept no liability for the technical information provided or for possible errors.

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.