Homag Kal pirkti naudotą (486)

Būklė: nepatikrintas (naudotas), Gamybos metai: 2008, Funkcionalumas: nepatikrintas, briaunos storis (maks.): 3 mm, X ašies padavimo greitis: 25 m/min, sukimosi greitis (maks.): 12 000 aps./min, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min MACHINE DETAILS Edge Processing Unit 1 Unit: Corner Processing Model: WK13 No. of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top Router No. of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multi-function Model: FK13 No. of motors: 2 automatic tool change with NC positioning Motor power: 0.4 kW Lrodpfxsytr Hbs An Ijl Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Top Router Model: UF11 No. of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 with NC positioning Edge Processing Unit 6 Unit: Glue Scraper Model: FA11 Edge Processing Unit 7 Unit: Brush No. of motors: 2 Motor power: 0.25 kW Edge Processing Unit 8 Unit: Brush No. of motors: 2 Motor power: 0.25 kW Total installed power: 35 kW EQUIPMENT Spray unit Software for machine programming: PowerControl PC22 CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. External Reference: 6216

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, - Ruošinio storis iki 60 mm - Briaunos storis iki 3 mm - Padvadas: 16 - 20 m/min - Bendras ilgis: 9365 mm - Powercontrol PC23 Mazgai: - Skyriklio purškimo mazgas viršuje/apačioje - Paruošiamoji freza 2x 3 kW - Klijavimo mazgas su 2 ritinių žurnalu - Kirtimo mazgas HL 81 0,8 kW - Priešfrezavimo mazgas FF30 apačioje/viršuje; 4x 0,4 kW - Laisva vieta 2 papildomiems mazgams Ljdpfx Aow R T Alen Isrl - Profilių grandiklis PN 10 - Plokštumos grandiklis - Valymo priemonės purškimo mazgas - Poliravimo mazgas

Būklė: naudotas, mašinos/transporto priemonės numeris: 006849, Type of applied edge: thin edge, thick edge, solid wood Adhesive system: EVA Jointing unit: yes Multifunction unit: yes Maximum feed speed: 25 m/min Maximum panel thickness: 60 mm Working units: 7 pcs Ljdpowd Itmofx An Ierl

Būklė: nepatikrintas (naudotas), Gamybos metai: 2009, Funkcionalumas: nepatikrintas, veikimo valandos: 29 000 h, ruošinio aukštis (maks.): 40 mm, X ašies padavimo greitis: 25 m/min, bendras ilgis: 7 755 mm, valdiklio modelis: PowerControl PC22, darbinio aukščio: 950 mm, TECHNICAL DETAILS Feed speed: 18 - 25 m/min Max. feed speed with FK11: 20 m/min Working height: 950 mm Minimum workpiece width (with workpiece thickness 12-22 mm): 60 mm (depending on workpiece length) Minimum workpiece width (with workpiece thickness 23-40 mm): 105 mm (depending on workpiece length) Workpiece overhang: 30 mm Workpiece thickness: 12 - 40 mm Edge material (roll): 0.3 - 3 mm Max. edge cross-section (PVC): 135 mm² Max. edge cross-section (veneer): 100 mm² Max. roll diameter: 830 mm Edge material (strips): 0.4 - 20 mm Max. edge cross-section (strips): 900 mm² MACHINE DETAILS Control system: PowerControl PC22 Pneumatic connection: 7 - 8 bar Total length: 7,755 mm Operating hours: approx. 29,000 h EQUIPMENT Workpiece support – scissor-type with roller support, extendable up to 1000 mm Automatic adjustment of infeed fence Fixed stop position left Pneumatically controlled infeed lock Upper pressure via driven composite V-belt Electric height adjustment Workpiece transport system via transport chain with rubber support Release agent spraying unit above/below Jointing cutter unit 2 x 3 kW Gluing unit A20 with 2 rollers, consisting of workpiece pre-heating, Quickmelt application system with quick-release mechanism, 2-roller magazine, pressure zone C (automatically adjustable, with 1 pre-press roller and 6 post-press rollers) End trimming unit HL84 0.8 kW, with automatic adjustment for bevel/straight and pneumatic control for flush/overhang trimming Pre-milling unit 1.5 kW, pneumatic adjustment for flush/overhang milling Profile trimming unit FK11 with automatic switching from bevel to radius trimming Profile scraper PN10 (with pneumatic adjustment to move aside) Finishing unit (with pneumatic adjustment to move aside), consisting of glue joint scraper and buffing unit Remote control Workpiece guide for FK unit Lodpfoyc S Haox An Isrl Note: Container loading and seaworthy packaging by the seller is not possible.

Būklė: naudotas, mašinos/transporto priemonės numeris: 006253, Type of applied edge: thin edge, thick edge, solid wood Adhesive system: EVA, PUR Lodpfxel Txxge An Ijrl Jointing milling: yes Multifunction unit: yes Max. feed speed: 40 m/min Maximum panel thickness: 60 mm Working units: 10 pcs

Būklė: naudotas, mašinos/transporto priemonės numeris: 006252, Type of applied edge: thin edge, thick edge, solid wood Adhesive system: EVA, PUR Jointing milling: yes Multifunction unit: yes Max. feed speed: 40 m/min Maximum panel thickness: 60 mm Working units: 10 pcs Ljdpfx Aewcyckon Ijrl

Būklė: naudotas, mašinos/transporto priemonės numeris: 006375, Uždėtos briaunos tipas: plona briauna, stora briauna Klijų sistema: PUR Sujungimo frezavimas: taip Daugiafunkcis agregatas: taip Ledpfx Anjp Apx To Iorl Maks. padavimo greitis: 25 m/min Maksimali plokštės storis: 60 mm Darbiniai agregatai: 9 vnt.

Būklė: paruoštas naudoti (naudotas), mašinos/transporto priemonės numeris: 0-200-03-8334, Funkcionalumas: visiškai funkcionalus, ruošinio aukštis (maks.): 60 mm, X ašies padavimo greitis: 24 m/min, valdiklio modelis: Power Control Pc 22, TECHNICAL DETAILS Panel height: 60 mm Solid wood: 20 mm PVC / ABS: 3 mm Feed speed: 24 m/min MACHINE DETAILS Control system: Power Control PC 22 Supply voltage: 480 V Frequency: 60 Hz Phases: 3~ + N Operating current: 51 A Protection/fuse: 63 A Phase circuit: 3~ Control voltage: 24 V EQUIPMENT Electrically adjustable working height via CNC Motorized, rubberized belt with increased pressure Panel support guide Side roller conveyor with idler rollers for panel support Sanding unit Edge heating lamps 6-position coil holder magazine with automatic edge change via CNC Gluing unit for EVA hot-melt adhesive with premelter and glue pot Edge pressure unit for straight profiles with electronically adjustable pressure rollers via CNC End trimming unit with 2 motors, automatic tilt adjustment Overlapping trimming/milling unit with 2 motors Lodpfx Anjydiymo Ijrl Glue/milling unit with 2 tiltable motors, electronically adjustable via CNC Multifunctional 4-motor corner rounding unit (profile scraper + corner rounding) with numerical control, automatic adjustment Space provision for potential installation of an additional working unit Edge scraping unit Oscillating brush unit

Būklė: labai geros būklės (naudotas), ONE-SIDED EDGE BANDING MACHINE "SOFTFORMING" - Min/max edge thickness (roll material) mm 0.3 - 3 - Min/max edge thickness (strips) mm 0.4 - 12 - Min/max workpiece thickness mm 12-60 - Control: Power Control PC 22 - Feed rate (variable) m/min 12 - 24 Lrsdpfx Anofd Ilyj Iol - Top pressure with a motorized V-belt - Gluing unit (hot-melt adhesives and pre-melting unit): QE 34 / E12 - Pressure roller track (revolver type) for straight and shaped panels (softforming) - Single-roll magazine - End trimming unit HL 84 (2 x 0.84 kW – 12,000 rpm) - Fine milling unit (2 x 1.5 kW – 12,000 rpm) - Milling unit (2 x 0.4 kW – 12,000 rpm) OPTIONAL: Feed-in system with extended infeed and 3-wheel motorized rubber top pressure

Būklė: labai geros būklės (naudotas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 / 3 Panel thickness (min/max) mm 8 / 60 Control Power Control 22 Feed speed m/min 18 Top pressure driven by V-belt Spray unit (for liquid anti-adhesive) Adjustable stop ruler, CNC-controlled Jointing cutter unit 2 x Kw 3 Gluing unit (P.U.R. glue + premelter) QA 34 + PU 34 Edge pressure zone (CNC-controlled) "A" Edge magazine for rolls (compartment No. 12) End trimming unit HL 84 (2 x Kw 0.22) pneumatic (2 pos.) Pre-milling unit Optimat (2 x Kw 0.55) Lrodjd Nt Nqjpfx An Isl Multi-function unit (radius milling and profile milling unit) FK 13 (2 x Kw 0.4) CNC (8+8) Multi-profile scraper unit (CNC-controlled) MN 21 Finishing unit (flat scraper + polishing unit) FA 11 (pneumatic) OPTION: Return conveyor direction "LIGMATECH" Model ZHR 05 (SOFIT code: Z02007)

Būklė: naudotas, Complete factory for furniture manufacturing, consisting of: SZ0M23) Angle panel saw "GIBEN" Type 17 (5700x2700 mm) with "SIRIO" stacking system SZ0M25) Panel saw "GIBEN" Model GammaDue (3800x2200 mm) SZ0M26) Multi-blade panel saw "GABBIANI" (finished panels 4250x2120 mm) SZ0M27) Laminating line (roller press) "BARBERAN" for melamine papers (paper glue application) SZ0M29) Press line "COLOMBO REMO" (1400x9600 mm) for paper/veneer/laminated panels SZ0M30) Press line "FRIZ" (1400x6200 mm) for paper/veneer/laminated panels Lrodpfx Anecr U Urs Iol SZ0M41) Double-sided sizing and edge banding line "IMA" Combima with high-speed "RBO-BIESSE" automatic handling system SZ0M42) Double-sided sizing and edge banding line "IMA" Combima Softforming with a second double-sided sizing and edge banding machine "STEFANI" and handling system "TOMASSINI" SZ0M39-40) Single-sided edge banding line for narrow workpieces "HOMAG" Model KAL 310 with splitter "NARDELLO" Model Elegance SZ0M35-36) Boring machine "BIESSE" Techno Logic with infeed and stacking system "TOMASSINI" SZ0M45) CNC-controlled drilling and dowel inserting line "BIESSE" Techno FDT with high-speed automatic handling system "RBO-BIESSE" SZ0M37) CNC machining center "MORBIDELLI" Model Author 600 KL SZ0M56) Roll slitting and winding machines "CEFLA-DUSPOHL" Type RSW 2200 T SZ0M01) Cutting line (circular saw) and wood strip cutting line "OGAM+SALVADOR" SZ0M07) Cutting line (circular saw) and wood strip stacking line "SALVADOR + SACOT" SZ0M08) Cutting line (circular saw) and wood strip stacking line "SALVADOR + CMA" SZ0M11-17) Preparation line for honeycomb panels SZ0M18) No. 6 multi-daylight press "COLOMBO REMO" (dimensions ?? x ?? mm) SZ0M21) Sizing and calibrating line for honeycomb panels "GABBIANI + CELASCHI + ELMAG + COSTA LEVIGATRICI" Numerous other machines (VITAP drilling machine, circular saws, glue application machines, etc.), dust extraction system, roller conveyors, shelving (wall racks), forklifts, pallet trucks, and more. The machines are still installed at the user’s site and can be inspected by appointment.

Būklė: labai geros būklės (naudotas), DOUBLE-SIDED EDGE BANDING MACHINE - Edge thickness (coil) min/max: 0.3 - 3 mm - Workpiece thickness (panel) min/max: 12 - 40 mm - Working width (min/max): 250 - 2500 mm - PC control system: PC22 - Top pressure system with driven rubber belts - Adjustable linear stop; feed speed: 10–32 m/min - Liquid glue unit - Jointing milling unit (vertical spindle moulder): 2 x 4 kW at 9,000 rpm - Quickmelt hot-melt adhesive unit A3 Ljdpfx Anjwk Hp To Ijrl - Pressure zone C (manual adjustment) "A" - Roll holder for 2 rolls - End trimming unit: HL 84 (2 x 0.22 kW at 12,000 rpm) - Pre-milling unit (2 x 0.4 kW at 12,000 rpm) - Finishing unit (scraper + buffing unit): FA11 - Polishing unit

Būklė: labai geros būklės (naudotas), Single-sided edge banding machine (LEFT) Edge thickness in rolls (min/max) mm 0.3 / 3 Panel thickness (min/max) mm 12 / 80 Edge thickness in strips/bands (min/max) mm 0.4 / 20 Control NC21 Feed speed m/min 18 Top pressure driven by V-belt Adjustable fence, CNC controlled Jointing milling unit 2 x 3 kW Gluing unit (Hot Melt + Pre-melter) A20 + A34 Edge pressure zone "C" Lodjl Iz Tuepfx An Ijrl Edge magazine for rolls (compartment no. 1) End trimming unit WK 14 (2 kW, 0.8 - 12,000 rpm), electro-pneumatic bevel/straight adjustment Pre-milling unit Optimat (2 x 1.5 kW) Milling unit MF20 (2 x 0.55 kW) Profile copying milling unit FF12 (4 x 0.4 kW) CNC (WD40) Free slot for profile scraper unit Finishing unit (flat scrapers + polishing unit) FA 10

Būklė: naudotas, Power Control PC 22 Panel height 60 mm Solid wood mm 20 PVC / ABS mm 3 Feed speed up to 24 m/min Working height electronically adjustable via CNC Powered pressure belt with increased pressure Lrsdpfxogiyn Ij An Iel Panel support guide Side roller track with support wheels for panel handling Rectifier unit Panel edge heating lamps Edge magazine with 6 positions and automatic edge change via CNC Gluing unit for EVA hot-melt adhesive with pre-melter and glue pot Edge pressure unit for straight profiles with electronically adjustable pressure rollers via CNC End trimming unit with 2 motors and automatic tilt adjustment Overlapping milling unit with 2 motors Gluing unit with 2 tilting motors, electronically controlled via CNC Multifunctional 4-motor corner unit (milling + rounding) with CNC control in automatic mode Space available for optional insertion of an additional working group Edge scraper unit Oscillating brush unit

Būklė: naudotas, mašinos/transporto priemonės numeris: 006574, Priklijuotos briaunos tipas: plona briauna, stora briauna, masyvas, fanera Klijavimo sistema: EVA Sujungimo frezavimas: taip Lodpfevxxuxjx An Ijrl Daugiafunkcis agregatas: taip Didžiausias padavimo greitis: 25 m/min Maksimalus plokštės storis: 60 mm Darbo agregatai: 7 vnt.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, ruošinio aukštis (maks.): 60 mm, ruošinio plotis (maks.): 60 mm, briaunos storis (maks.): 20 mm, The machine has been serviced and is in excellent condition. It is ready for immediate use! TECHNICAL DETAILS Bonded edge thickness: max. 20 mm Maximum gluing height: 60 mm Maximum roller material thickness: 3 mm Workpiece width: min. 60 mm Maximum feed speed: max. 25 m/min Feed: continuous Electrical height adjustment: available Pressure: upper belt pressure Preheating zone: available Granulate glue system: with prefabricated container Glue pot: interchangeable/variable Spray unit: available Pre-milling unit: available Trimming unit: with 2 motors Milling stations: flush/radial/chamfer, 1 available Corner copying unit: with 2 motors Edge scraper: profile and planer Polishing unit: available Strip magazine: available Units: synchronized units with NC axis/axes Machine version: left-hand side Quick change units: available MACHINE DETAILS Remote control: PowerControl PC 22 Weight: 5,000 kg Machine length: 7,845 mm Lsdpfx Ajx Tqgben Isrl Standards: CE regulations EQUIPMENT - Special equipment: with nesting - new chains - HOMAG feed device 2 rollers - HOMAG A 20 gluing unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG profile pull scraper unit PN 10 - HOMAG FA 11 finishing unit

Būklė: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, ruošinio aukštis (maks.): 60 mm, ruošinio plotis (maks.): 60 mm, briaunos storis (maks.): 20 mm, The machine has been serviced and is in excellent condition. It is ready for immediate use! Lsdpexzfwbefx An Iorl TECHNICAL DETAILS Bonded edge thickness: max. 20 mm Maximum gluing height: 60 mm Maximum roller material thickness: 3 mm Workpiece width: min. 60 mm Maximum feed speed: max. 25 m/min Feed: continuous Electrical height adjustment: available Pressure: upper belt pressure Preheating zone: available Granulate glue system: with prefabricated container Glue pot: interchangeable/variable Spray unit: available Pre-milling unit: available Trimming unit: with 2 motors Milling stations: flush/radial/chamfer, 1 available Corner copying unit: with 2 motors Edge scraper: profile and planer Polishing unit: available Strip magazine: available Units: synchronized units with NC axis/axes Machine version: left-hand side Quick change units: available MACHINE DETAILS Remote control: PowerControl PC 22 Weight: 5,000 kg Machine length: 7,845 mm Standards: CE regulations EQUIPMENT - Special equipment: with nesting - new chains - HOMAG feed device 2 rollers - HOMAG A 20 gluing unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG profile pull scraper unit PN 10 - HOMAG FA 11 finishing unit

Būklė: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, ruošinio aukštis (maks.): 60 mm, ruošinio plotis (maks.): 60 mm, briaunos storis (maks.): 20 mm, The machine has been serviced and is in excellent condition. It is ready for immediate use! TECHNICAL DETAILS Bonded edge thickness: max. 20 mm Maximum gluing height: 60 mm Maximum roller material thickness: 3 mm Workpiece width: min. 60 mm Maximum feed speed: max. 25 m/min Lodpfx Ajxg Ix Son Iorl Feed: continuous Electrical height adjustment: available Pressure: upper belt pressure Preheating zone: available Granulate glue system: with prefabricated container Glue pot: interchangeable/variable Spray unit: available Pre-milling unit: available Trimming unit: with 2 motors Milling stations: flush/radial/chamfer, 1 available Corner copying unit: with 2 motors Edge scraper: profile and planer Polishing unit: available Strip magazine: available Units: synchronized units with NC axis/axes Machine version: left-hand side Quick change units: available MACHINE DETAILS Remote control: PowerControl PC 22 Weight: 5,000 kg Machine length: 7,845 mm Standards: CE regulations EQUIPMENT - Special equipment: with nesting - new chains - HOMAG feed device 2 rollers - HOMAG A 20 gluing unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG profile pull scraper unit PN 10 - HOMAG FA 11 finishing unit

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2011, mašinos/transporto priemonės numeris: 0-200-07-9819, Typ: KAL210 / EDITION Maschinennummer: 0-200-07-9819 Baujahr: 2011 Einseitige Kantenanleimmaschine zur Bearbeitung gerader Werkstückkanten. Kantenanleimen und Nachbearbeitung verschiedener Kantenmaterialien im Durchlauf, sowohl längs als auch quer. Steuerung: POWER CONTROL PC22 Steuerungssystem Windows PC Hardware: - SPS-Steuerung - Integrierte Streckenkontrolle zur berührungslosen Überwachung der Bearbeitungsaggregate - Betriebssystem Windows XP - Industrie-PC - 10" TFT-Monitor mit Touchscreen, Auswahl und Einstellung aller notwendigen Produktionsparameter wie Programmwahl und Werkstückdickenverstellung - PC-Tastatur und Maus - USB-Anschluss - Netzwerkanschluss - Fernbedienung - Rüstbetrieb, Vorschubstart, Not-Aus-Schalter Aggregatausrüstung: - Trennmitteldosiergerät - Fügefräsaggregat - Leimaggregat A20 mit 2 Walzen - Kappsägemodul HL84 - Vorfräsaggregat - Formfräsaggregat FF32 - Universalfräsaggregat UF10 - Profil-Schleifaggregat PN10 - Finishaggregat (Fugenschleifaggregat + Polierbürsten) Technische Daten: Minimale Werkstückbreite: - bei Dicken 12-22 mm: 60 mm - bei Dicken 23-40 mm: 105 mm Werkstücküberstand: 30 mm Werkstückdicke: 12-60 mm Kantenmaterial von der Rolle: 0,3-3 mm Kantenquerschnitt max.: - PVC: 135 mm² - Furnier: 100 mm² Kantenmaterial-Streifen: 0,4-20 mm Lrodsyn Ilpepfx An Iel Kantenquerschnitt Streifen: 900 mm² Arbeitshöhe: 950 mm Pneumatik: 6 bar Anschlusswert: 400 Volt, 50 Hz, 3-phasig Hinweis: Änderungen und Irrtümer der technischen Angaben vorbehalten.

Būklė: naudotas, Gamybos metai: 2013, bendras aukštis: 2 100 mm, bendras ilgis: 9 000 mm, bendras plotis: 1 050 mm, Weight: 6,000 kg Price: On request - Special features: Lsdpfx Anjyrp Uas Ijrl - Description: Not functional – several sensors are loose and the glue tank has been dismantled; the machine has not yet been tested - Year of manufacture: 2013 - Documentation available: No - CE certificate available: No - Serial number: - Number of units: 9 - 1st unit type: Pre-milling unit - Tools included: Yes - 2nd unit type: Gluing unit - Type/brand: Nordson - 3rd unit type: Pressure rollers - Tools included: Yes - 4th unit type: End trimming unit - Tools included: No - 5th unit type: Rough trimming unit - 6th unit type: Milling unit - 7th unit type: Fine trimming unit - 8th unit type: Milling unit - 9th unit type: Milling unit - Tools included: Yes - Glue system: Glue pot - Voltage [V]: 400 - Power consumption [A]: 69 - Fuse [A]: 80 - Transport dimensions: 9,000 mm x 1,050 mm x 2,100 mm (L x W x H) - Transport weight [kg]: 6,000 kg - Number of transport packages: 4 Financial information VAT: The stated price is net, excluding VAT VAT/Profit margin scheme: VAT is deductible for businesses Delivery and trade-in possible at any time for all industrial equipment Yorick Diebels

Būklė: naudotas, Gamybos metai: 2017, bendras aukštis: 2 100 mm, bendras ilgis: 6 700 mm, bendras plotis: 1 050 mm, Weight: 3,500 kg Price: On request - Special features: - Description: Including Nordson unit from 2017 - Year of manufacture: 2017 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: - Number of units: 6 - 1st unit type: Pre-milling unit - Type/Brand: Nordson - Tools included: Yes - 2nd unit type: Gluing unit - 3rd unit type: Pressure rollers - Tools included: Yes - 4th unit type: Coarse milling unit - 5th unit type: End trimming unit - 6th unit type: Fine milling unit Lodpfx Ajyrpvwon Isrl - Voltage [V]: 400 - Power consumption [A]: 41 - Fusing [A]: 50 - Transport dimensions: 6700 mm x 1050 mm x 2100 mm (L x W x H) - Transport weight [kg]: 3,500 kg - Number of transport packages: 5 Financial Information VAT: The indicated price is net, plus applicable VAT VAT/Differential taxation: VAT deductible for business customers Delivery and trade-in possible at any time for all industrial sector equipment Yorick Diebels

Būklė: naudotas, Gamybos metai: 2008, bendras aukštis: 1 800 mm, bendras ilgis: 10 000 mm, bendras plotis: 2 200 mm, Weight: 5,500 kg - Year of manufacture: 2008 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: - Number of units [pcs.]: 8 - 1st unit type: Pre-milling unit - 2nd unit type: Glue application unit - 3rd unit type: Cross-cutting unit - 4th unit type: Rough trimming unit - 5th unit type: Rough trimming unit - 6th unit type: Radius scraping unit - 7th unit type: Flat scraping unit - 8th unit type: Brushing unit - Voltage [V]: 400 - Power consumption [A]: 43 - Fuse [A]: 50 - Transport dimensions: 10,000 mm x 2,200 mm x 1,800 mm (L x W x H) - Transport weight [kg]: 5,500 kg - Transport packages [pcs.]: 3 Ledpoychw Ijfx An Isrl Financial information VAT: The indicated price is exclusive of VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial equipment Yorick Diebels

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2012, ruošinio plotis (maks.): 60 mm, gaminio ilgis (maks.): 7 845 mm, 2012 m. pagamintos briaunų šlifavimo staklės. Šio "HOMAG KAL211 Edition 2264" darbinis aukštis yra 950 mm, o ruošinių storis - nuo 8 mm iki 60 mm. Jį sudaro įvairūs įrenginiai, pavyzdžiui, klijavimo įrenginys, jungčių apipjaustymo įrenginys ir išankstinio frezavimo įrenginys, didinantys jo universalumą. Jei norite gauti aukštos kokybės kraštų apklijavimo galimybes, apsvarstykite mūsų parduodamas "HOMAG KAL211 Edition 2264" stakles. Susisiekite su mumis dėl išsamesnės informacijos apie šią mašiną. • Padavimo greitis: 18-25 m/min • Padavimo greitis (maks. su FK11 įrenginiu): 20 m/min. • Darbinis aukštis: 950 mm • Pneumatinė jungtis: Pneumatinė jungtis: 6 bar • Bendras ilgis: 7845 mm • Ruošinio plotis (min.): • 60 mm, esant 12-22 mm storiui • 105 mm, kai storis 23-40 mm • Ruošinio storis: 8-60 mm (išplečiamas naudojant parinktis) • Krašto medžiagos storis: • Ritinėliai: 0,3-3 mm • Juostos: 3,3 mm storio: 0,4-20 mm • Elektrinis: • Maitinimo įtampa: 400 V / 3 Ph / 50 Hz • Bendra apkrovos srovė: 67 A • Valdymo įtampa: 24 V • Valdymo sistema: PowerControl PC22 (Windows XP pagrindu) • Programinė įranga: WoodCommander; WoodScout (pasirinktinai); Schuler MDE Basic • Agregatai / vienetai: • Skiriamosios medžiagos purškimo įrenginys (viršuje / apačioje) • Jungčių apipjaustymo įrenginys (2 varikliai po 4 kW) • Klijavimo įrenginys A20 su 2 ritinėliais (Quickmelt sistema) • PU65 dengimo įrenginys (keičiamas, padengtas teflonu) • Paruošimas "LaserTec" aktyvavimo įrenginiui • Galų apipjaustymo įrenginys HL84 (0,8 kW) • Išankstinio frezavimo įrenginys BF10 (1,5 kW) • Daugiaprofilinių formų frezavimo įrenginys FK11 (rankinis reguliavimas) • Profilių grandiklis PN10 Lodpsy Hi Eiefx An Ijrl • Apdailos įrenginys (klijų siūlių grandiklis + poliravimo įrenginys) • Valymo priemonių purškimo įrenginys Papildoma įranga • Automatikos paketas (Nr. 4013): • Automatinis padavimo tvorelės ir slėgio zonos reguliavimas • Elektroninis viršutinės spaudimo sijos aukščio reguliavimas

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, Parduodu pilnai sukomplektuotą briaunų klijavimo staklę HOMAG KAL370 AMBITION 2280, pagaminimo metai 2015: Konfigūracija: - Įvado liniuotė reguliuojama rankiniu būdu - Jungimo frezavimas reguliuojamas rankiniu būdu - Briaunų klijavimas su pašildymo baku - Medžiagos prispaudimo zona reguliuojama rankiniu būdu - Kirtimo pjūklai reguliuojami pneumatiškai - Viršutinio ir apatinio spindulio frezavimas reguliuojamas rankiniu būdu - Apvalus agregatas 4 variklių, reguliuojamas rankiniu būdu - Spindulio peilis R2 atjungiamas pneumatiškai / antras komplektas R1 įskaičiuotas - Plokščias gramdiklis - Poliravimo šepetėliai Ledoxnbx Ispfx An Isrl - Skiriamoji purškimo sistema priekyje - Valymo purškimo sistema gale Darbinis aukštis reguliuojamas rankiniu būdu Medžiagos aukštis 8–60 mm Briaunų storis 0,4–20 mm Padavimo greitis iki 20 m/min Bendras ilgis su padavimo stalu 7860 mm Skaitiklio rodmuo: priklijuota 2 926 000 metrų. Pilna dokumentacija ir CE ženklinimas. Labai gera būklė, pilnai veikianti!

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, Parduodu pilnai sukomplektuotą briaunų klijavimo staklę HOMAG KAL370 AMBITION 2474, pagaminimo metai 2015: Konfigūracija: - Įvado atrama reguliuojama servovarikliu - Briaunų apipjovimo freza reguliuojama pneumatiniu būdu - Briaunų klijavimas su pašildymo baku + AirTec sistema - Medžiagos prispaudimo zona reguliuojama servovarikliu - Atpjovimo pjūklai reguliuojami pneumatiniu būdu - Viršutinio ir apatinio radiaus frezavimas reguliuojamas servovarikliu - Apvalinimo agregatas su 4 varikliais, reguliuojamas pneumatiniu būdu - Radiaus grandiklis R2 + multiradius, išjungiamas servovarikliu - Lygios plokštumos grandiklis - Poliravimo šepečiai - Seperatoriaus purškimo sistema priekyje - Valymo purškiklis gale Lrsdpoxnb Uvefx An Ijl Automatinis žurnalas 2 ritininių briaunų Darbinio aukščio reguliavimas servovarikliu Medžiagos aukštis 8-60 mm Briaunų storis 0,4-20 mm Padavimo greitis iki 25 m/min. Bendras ilgis su padavimo stalu 8365 mm Darbo statusas: priklijuota 1.166.000 metrų. Visiškai su dokumentacija ir CE ženklinimu. Labai gera būklė, pilnai veikianti!