DVIPUSIS KRAŠTŲ APIPJAUSTYMAS

HOMAG KAL 526 /5/A3/25/S2

Būklė: labai geros būklės (naudotas), CHIRON DZ 18.2 KW, Year of manufacture: 2012 Control: Fanuc 31i Travel: X / Y / Z 630 x 520 x 400 mm Pallet changer: 2x 940 x 470 mm 2 spindles Gbedpeuviiwjfx An Hou Spindle distance: 320 mm 2×32-position tool changers Tool holder: SK40 Max. spindle speed: 10,000 rpm

Būklė: labai geros būklės (naudotas), GANTRY LOADER with DOUBLE LOADING STATION Vacuum system (with its pump) No. 4 vertical columns supporting the upper crossbeam No. 1 upper horizontal crossbeam (for the movement of the motorized trolley) No. 1 motorized trolley to which horizontal arms are attached No. 2 adjustable horizontal metal arms with vacuum suction cups No. 2 floor-mounted rollers for feeding panel stacks into the Loader No. 1 motorized roller table (delivering panels to the Unloader), with additional cross motorized conveyor belts (at 90°). Dimensions approx. 7,232 mm Separate electrical and control panel OMRON electronic controls Perimeter safety and protection metal fences Working capacity (cycles/minute): approx. 16 - 20 Minimum/maximum board thickness: approx. 10 – 50 mm Minimum panel size: approx. 250 x 320 mm Maximum panel size: approx. 1,200 x 3,200 mm Gbsdjd Rg Dpspfx An Hou Installed power: 23.3 kW

Būklė: naudotas, Gamybos metai: 2014, ruošinio svoris (maks.): 25 000 kg, bendras ilgis: 10 000 mm, bendras aukštis: 6 000 mm, bendras plotis: 10 000 mm, bendras svoris: 60 000 kg, DÖRRIES SCHARMANN VCE 3000 / 280 CNC vertikalus tekinimo centras Modernizacija: 2014 m. atlikta modernizacija, įdiegta „Siemens SINUMERIK 840D SL“ valdymo sistema. Darbinis plotas: Tiekiamo ruošinio skersmuo: 2800 mm Maksimalus apsisukimo skersmuo / tekinimo skersmuo: 3000 mm Maksimali stalo apkrova: 25 000 kg Maksimalus tekinimo aukštis: apie 2100 mm X ašies eiga: ±1550 mm Z ašies eiga / pagrindinio stūmoklio eiga: 1500 mm Pagrindinis variklis ir verpstės: Pagrindinis variklis: „Siemens“ pagrindinis variklis Variklio galia: 130 kW Maksimalus verpstės sukimosi greitis: 4500 aps./min. Darbo režimas: S6, 40 % Įranga: 2 vertikalios verpstės Įrankių keitiklis ir papildoma įranga: 2 automatiniai įrankių keitikliai Aušinimo ir tepimo sistema Skiedrų išvežimo sistema Alyvos rūko ištraukimo sistema Gbedpfxezmkzps An Hsu 2 atskiri hidrauliniai agregatai Veikimo valandos: apie 12 571 valanda, pagal mechaninį valandų skaitiklį Stalo skersmuo: 2800 mm Valdymas: „Siemens SINUMERIK 840D SL“ Didžiausia detalės svoris: 25 000 kg Apsisukimo skersmuo: 3000 mm Maksimalus tekinimo aukštis: 2100 mm Apytikslis svoris: 60 000 kg Matmenys (ilgis x plotis x aukštis): apie 10000 x 10000 x 6000 mm Pagaminimo metai: 2014 Būklė: gera Apmokėjimo sąlygos: 100 % išankstinis apmokėjimas prieš atsiėmimą Pristatymo sąlygos: EXW (nuo gamyklos) Įrenginys prijungtas prie elektros: ne

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1994, A Schüco profile rolling machine for the thermal break of aluminium profiles in window, door, and façade construction is available. Processing speed: 45 m/min, control speed: 15 m/min, max. profile height: 400 mm, max. profile width: 250 mm, max. insulation bar width: 300 mm, machine dimensions X/Y/Z: approx. 2700 mm / 800 mm / 1650 mm, weight: approx. 900 kg. Includes insulation bar feeder, safety guard cage/straightening roller set, roller conveyor and roller conveyor extension. Documentation available. On-site inspection possible. Gsdpfx Aewtg Hwjn Hjbu

Gamybos metai: 2020, būklė: naujas, The deaerator is used for removing air bubbles from the puree. The air bubbles mix with the puree during the pulping process. Made of stainless steel. Deaeration takes place in a vacuum tank. Operating temperature approximately 50°C. A water ring pump is integrated to create vacuum in the tank. Gbodpfjcl Tt Rox An Hsu The puree is drawn in by the pasteurizer pump. Level sensors are included to measure the inflow and outflow of the liquid. Electrical supply: 400V / 50 Hz / 16A Power consumption: 2.2 kilowatts Water supply: approx. 100 l/h

Būklė: naudotas, mašinos/transporto priemonės numeris: 006603, Uždedamos briaunos tipas: plona briauna, stora briauna, masyvi mediena Gbjdpfx Aneyngz Aj Hju Klijavimo sistema: EVA Frezavimas sujungimui: taip Daugiafunkcis agregatas: taip Maks. padavimo greitis: 14 m/min Maksimalus plokštės storis: 60 mm Darbo agregatai: 8 vnt.

Būklė: naudotas, The machine has a defect on the main spindle. CNC Vertical Machining Center CHIRON Type FZ 22 L high speed Machining center with CNC control FANUC Series 21-M Serial no. 179-98 Year of manufacture: 1999 Travels X: 2000 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Table load 525 kg (per meter) Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Tapping capacity M27 Tool diameter 75 mm Diameter with free adjacent stations 105 mm Tool change time tool-to-tool: 2.0 sec. Tool change time chip-to-chip: 4.8 sec. Distance spindle nose - table: 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Connection 400 Volt, 50 Hz, 32 kVA - Pendulum machining over 2 work areas (partition wall missing) - CNC control FANUC Series 21-M - 40-fold tool changer - ICS = internal coolant supply through the spindle - Splash guard cabin with sliding door - Indirect linear measuring system - Coolant unit with chip conveyor next to the machine - Electronic handwheel Transport dimensions of main machine L x W x H: 4600 x 2470 x 2950 mm Machine weight approx. 7.5 t Transport space required on truck L x W x H: 12000 x 2470 x 2950 mm Transport weight on truck approx. 10 t Gbedpfx Aequhbgjn Heu Weight 7.2 t Good condition - Machine has a defect on the main spindle.

Būklė: naudotas, Gamybos metai: 2009, Numerical control POWER CONTROL PC 22 Machine suitable for the 1st and 2nd pass of the panel Motorized mobile shoulder opening by N.C., mm 3000 Maximum panel height: 60 mm PVC-ABS edge thickness: 3 mm Feed speed: 40 m/min Feed speed with corner rounding: 20 m/min Gbodjpp Tkfepfx An Hsu Motorized rubber pressure belt Guide rail with retractable pin (distance between pins: 500 mm) Squaring unit consisting of: - Anti-adhesive unit - Timer-controlled automatic anti-chip unit - Double scoring unit - Spare space for each group extension Glue unit with pre-melter and glue pot Automatic adjustment of the edge pressure rollers Edge holder magazine with 2 positions Trimming unit with two motors Overlap cutting unit Corner rounding unit (FK rounding group) Edge scraper unit Glue scraper group Brush unit Anti-adhesive unit

Gamybos metai: 1996, būklė: labai geros būklės (naudotas), I am selling a double-end profiler milling machine EGURKO ORTZA PDA 56/2. Working width: 200 to 3000 mm Configuration left side / fixed: 3 swiveling side milling units Gbsdpfxeizrf Ns An Hju Configuration right side / movable: 3 swiveling side milling units Material pressure belt with top feed. Through-feed machine. Condition: Very good. Available immediately. Machine is assembled, can be switched on right away. Price per unit. 2 units in stock, available immediately.

Būklė: labai geros būklės (naudotas), FORMAT and EDGE BANDING LINE for ONE-SIDED POSTFORMING PROCESSING (FOR DIRECT PROCEDURE) Consisting of the following machines: Gbedpjnzhxqofx An Hou A) Double-sided portal loading unit “TREVISAN” with motorized roller conveyor B) HOMAG one-sided POSTFORMING MACHINE FOR DIRECT PROCESS Model Profi VFL79/3/P/A - Maximum laminate thickness: 0.35 mm (for L and U profiles) - Workpiece thickness (min/max): 16 / 30 mm (optionally 50 mm) - Minimum workpiece width: 150 mm - Feed speed: 10 – 32 m/min - Control system: PC 22 / software package woodCommander - 01° Standard milling unit 2.2 kW (for scribing from above) - 02° Hogging unit 15 kW (for pre-hogging from above) 0° - 15° - 03° Standard milling unit 6.6 kW (for rebate milling above), motor shaft for hydro-locking tool holder - 04° Standard milling unit 6.6 kW (for rebate milling below) 0° - 120° (with hydro-locking) - 05° Radius milling unit 0.7 kW (for profiling the edges) - 06° Milling unit for top layer on U-profiles, HSK25 1.85 kW - 07° Universal milling unit UF 11 4 kW (for grooving or rebating) - 08° Milling unit 2.2 kW (for chamfer and laminate strip milling above) - 09° Milling unit 2.2 kW (for underside groove milling) - 10° RIGHT: Standard milling unit 6.6 kW (for grooving or rebating), working width 160 - 1050 mm - 11° RIGHT: Milling unit above and below 2 x 1 kW, 0° - 25° - 12° Workpiece cleaning postforming, blower 0.55 kW - 13° Laminate overhang monitoring (for detecting laminate breakout) - 14° Compact gluing unit PU34 + QA34, slot nozzle glue application - 15° Base unit pressure zone L-profile VF Direct for workpiece thickness max. 50 mm - 16° Base unit pressure zone for U-profile VF Direct for special profile R = 2.5 mm - 17° Top rotary knife - 18° Top milling unit 1 x 0.55 kW, 0° - 30° - 19° Top buffing unit with oscillation 1 x 0.25 kW C) Double-sided portal stacking unit “TREVISAN” with motorized roller conveyor