Kraštų apklijavimo mašinos

Homag Kal 310/8/A20/S2

Būklė: labai geros būklės (naudotas), Single-sided edge banding machine (LEFT) Edge thickness in rolls (min/max) mm 0.3 / 3 Panel thickness (min/max) mm 12 / 80 Edge thickness in strips/bands (min/max) mm 0.4 / 20 Control NC21 Feed speed m/min 18 Top pressure driven by V-belt Adjustable fence, CNC controlled Jointing milling unit 2 x 3 kW Gkjdpfx Ahel Iz Tuslja Gluing unit (Hot Melt + Pre-melter) A20 + A34 Edge pressure zone "C" Edge magazine for rolls (compartment no. 1) End trimming unit WK 14 (2 kW, 0.8 - 12,000 rpm), electro-pneumatic bevel/straight adjustment Pre-milling unit Optimat (2 x 1.5 kW) Milling unit MF20 (2 x 0.55 kW) Profile copying milling unit FF12 (4 x 0.4 kW) CNC (WD40) Free slot for profile scraper unit Finishing unit (flat scrapers + polishing unit) FA 10

Būklė: naudotas, Gamybos metai: 2012, X-axis travel: 630 mm Y-axis travel: 800 mm Z-axis travel: 750 mm Control: SINUMERIK 840D sl Siemens B-axis: 360° x 0.001° Gkodpfevxwxvjx Ahlja A-axis: -200° to +25° x 0.001° Spindle speeds - stepless: 20 - 18,000 rpm Drive power, 100% duty cycle: 28.00 kW Drive power, 40% duty cycle: 34.00 kW Torque at 40% / 100% duty cycle: 110 / 84 Nm Tool holder: HSK 63 Feed rate X/Y/Z axes: 1 - 100,000 mm/min Rapid traverse X/Y/Z: 100.00 m/min Feed force X/Y/Z: 9 / 6 / 9 kN Feed rate B-axis: 1 - 14,400 °/min Feed rate A-axis: 1 - 7,200 °/min Pallet size: 2x 500 x 500 mm Maximum workpiece weight: 400 kg Maximum workpiece diameter: 800 mm Maximum workpiece height: 800 mm Tool magazine with 63 positions Maximum tool diameter: 280 mm Maximum tool length: 550 mm Maximum tool weight: 15.00 kg Total connected load: 65.00 kW Machine weight approx.: 14.00 t Space required approx.: 5.50 x 3.50 x H3.20 m 5-axis machining center with SIEMENS SINUMERIK 840D sl control, mechanical tool breakage monitoring, and emulsion mist extractor. Machine was part of a production line, therefore supplied without chip conveyor and without coolant system.

Būklė: naudotas, Gamybos metai: 2005, Vientisos briaunų laminavimo staklės, skirtos tiksliam ir stabiliam masyvo bei plokščių (MDF, LMDP, laminatas) ruošinių briaunų laminavimui. Įrenginys suprojektuotas kaip kompaktiškas, tačiau pilnai sukomplektuotas sprendimas mažoms ir vidutinėms serijoms, ypatingą dėmesį skiriant apdirbimo kokybei. Masinė iš ketaus pagaminta staklių bazė užtikrina aukštą standumą ir ilgalaikį geometrinį stabilumą. Staklės komplektuojamos su klasikiniu nuolatinio padavimo transporteriu, spaudimo juosta bei visais reikalingais apdirbimo agregatais, leidžiančiais atlikti briaunų apdirbimą vienu praleidimu. Techninė staklių komplektacija - Priešfrezuojanti agregatas - Medžiagos pašildymas - Automatinis EVA klijų padavimas - EVA klijų tepimo volelis - Kapavimo pjūklai (priekinis ir galinis) - Šiurkščioji frezavimo agregatas - Apvalinimo agregatas - Radiuso skirtukas - Klijų gramdiklis Gkjdpfxjyfw Syo Ahlja - Įpjovimo agregatas - Šepetėlinė agregatas - Atbulinis transporterinis padavimas

Būklė: paruoštas naudoti (naudotas), mašinos/transporto priemonės numeris: 0-200-03-8334, Funkcionalumas: visiškai funkcionalus, ruošinio aukštis (maks.): 60 mm, X ašies padavimo greitis: 24 m/min, valdiklio modelis: Power Control Pc 22, TECHNICAL DETAILS Panel height: 60 mm Gksdjydiymepfx Ahlea Solid wood: 20 mm PVC / ABS: 3 mm Feed speed: 24 m/min MACHINE DETAILS Control system: Power Control PC 22 Supply voltage: 480 V Frequency: 60 Hz Phases: 3~ + N Operating current: 51 A Protection/fuse: 63 A Phase circuit: 3~ Control voltage: 24 V EQUIPMENT Electrically adjustable working height via CNC Motorized, rubberized belt with increased pressure Panel support guide Side roller conveyor with idler rollers for panel support Sanding unit Edge heating lamps 6-position coil holder magazine with automatic edge change via CNC Gluing unit for EVA hot-melt adhesive with premelter and glue pot Edge pressure unit for straight profiles with electronically adjustable pressure rollers via CNC End trimming unit with 2 motors, automatic tilt adjustment Overlapping trimming/milling unit with 2 motors Glue/milling unit with 2 tiltable motors, electronically adjustable via CNC Multifunctional 4-motor corner rounding unit (profile scraper + corner rounding) with numerical control, automatic adjustment Space provision for potential installation of an additional working unit Edge scraping unit Oscillating brush unit

Gamybos metai: 2009, būklė: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: 104/1656, Größe 60 x 75 cm, nur zum Wenden (ohne Lüften), mit festem Bedienpult Gkodehqhciepfx Ahloa Maschinen-Nr.: 104/1656

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Working width: 1100 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,120 x 1,900 mm Variable feed speed: 2.6 – 13 m/min Feed motor power: 1.10 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 1705 x 1545 x 1905 mm 1st Unit: Steel contact roller, Ø 160 mm Motor power: 15 kW, 400 V, 50 Hz 2nd Unit: Combination unit, rubber-coated contact roller, 65 Shore, rigid sanding platen Motor power: 11 kW, 400 V, 50 Hz Abrasive belt cleaning via compressed air 3rd Unit: Cleaning brush Multifunction display Multifunction lever (conveyor belt, workpiece thickness adjustment) Electronic abrasive belt oscillation Conveyor carpet oscillation, pneumatic Motorized workpiece thickness adjustment with LED display in 0.1 mm increments Units equipped with emergency stop device Emergency stop button at infeed & outfeed Motor protection switch Roller table extension at infeed with 2 loose rollers Automatic star/delta starting Complete documentation Note on used machines: • Subject to errors in technical data and prior sale. • Prices quoted are ex-works, loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as seen, with no warranty whatsoever. Buyers are welcome to inspect the machines at the location. Gsdpeychqzsfx Ahlska • Special agreements are only valid in writing. (Inquiries will only be answered with your address and telephone number!)

Būklė: naudotas, Gamybos metai: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of Units and Accessories (Basic) The structure of the machine base is a monolithic construction made of thick-walled steel. It is reinforced through the entire machine bed with welded triangular plates, providing exceptionally high stability. The triangular shape with a wide base used for supporting parts is the key to ensuring long-lasting precision and stability. The design of the machine allows the user to maintain an optimal workflow, even with minimal space requirements. This machine base offers the processing unit a balanced and secure foundation with excellent load distribution. The mobile unit carrier, designed as a gantry, is constructed as a solid monoblock. It is positioned in the X-direction on prismatically ground rails using recirculating ball carriages. The machining unit is again mounted on the mobile carrier on prismatically ground rails and recirculating ball carriage. Axis movement: The drive system in the Y and Z axes is via ground recirculating ball screws of the highest precision class. The drive in the X axis is via a backlash-free, preloaded precision rack-and-pinion drive. This ensures balanced load distribution during the positioning process. Such a characteristic is crucial to ensure smooth movement, even during more complex operations. The movement of the various axes is achieved by brushless AC servomotors. These provide excellent positioning speeds due to very short ramp-up times. Additionally, the measurement systems are fully integrated into these motors. These features make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (Basic) · Vacuum pump: 100 m³/h · Power: 2.5 kW · Max. vacuum (connection) 0.9 bar Control / Control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRICAL/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC provides the NC control system with an unparalleled level of user familiarity: the software runs on Windows XP, allowing fast and easy programming that can be learned quickly, even by inexperienced users. The system is open and allows the connection of a CD-ROM drive, sound card, barcode reader, modem, printer, scanning systems, etc. Furthermore, installation of all commercially available network systems as well as any CAD programs available on the market is possible. To save space, the control cabinet is placed under the machine table, and the operator works at a separate wheeled terminal that can be freely positioned. PROGRAMMING SYSTEM XILOG Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the chosen plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax help for drilling and milling operations - Parametric programming to perform the same panel machining on different Gkodpfx Ajvvi Rfshlea

Būklė: naudotas, mašinos/transporto priemonės numeris: 007227, Pozicija 1: Vienpusė briaunų klijavimo staklės HOMAG + LIGMATECH-KAL 310 + ZHR 05 Pozicija 2: Plokščių grąžinimo sistema HOMAG + LIGMATECH-KAL 310 + ZHR 05 Gjdpfx Aowuuc Ashleka

Būklė: naudotas, mašinos/transporto priemonės numeris: 007984, Didžiausias apdirbamas plotis: 1300 mm Mažiausias apdirbamas storis: 4 mm Gsdpfx Aswqdbmshloka Darbo stalas: fiksuoto aukščio Vakuuminis konvejeris: taip Darbo agregatų skaičius: 4 vnt

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weinig Powermat 500 Four-Sided Planer Working width: 230 mm Working height: 160 mm Number of spindles: 6 Spindle configuration: - Bottom: 5.5 kW, 8000 rpm - Right: 5.5 kW, 8000 rpm - Left: 7.5 kW, 8000 rpm - Top: 7.5 kW, 8000 rpm - Bottom: 7.5 kW, 8000 rpm - Universal: 5.5 kW, 8000 rpm Spindle No. 6 equipped with PowerLock system Feed speed adjustable by inverter up to 30 m/min Feed rollers embedded in the working table (1 grooved roller for wet timber) Gkedpfx Ahsvfr Rgolsa Electromechanical adjustment of working height and width Pneumatic material hold-downs Drive via cardan shafts Total power: 41 kW Year of manufacture: 2005 CE certificate