Holzkraft Sc 2 pirkti naudotą (215)

Sąlyga: naujas, Gamybos metai: 2025, Planer-thicknesser Minimax FS 41es TERSA Maximum equipment for professionals. Article number: 5503431 Brand: Holzkraft / SCM Helical-toothed steel feed roller for consistent and even material feed, allowing planing from as little as 0.2 mm chip removal (at minimum workpiece thickness of 3 mm) – ideal for economical planing of precious hardwoods. Models with TERSA cutterblock enable blade changes within seconds and operate with particularly low noise. Material feed with two speeds. Extra-long planer tables for easy and precise alignment of workpieces. Tables made from cast iron, annealed and stress-free for durability and long-term flatness. Simultaneously opening, rear-hinged jointer tables for short setup times. Thickness table adjustment via handwheel with digital height display. High machine weight for maximum precision and smooth operation. Powerful industrial motor. Robust steel/cast iron construction. Quality – Made in Italy. TECHNICAL DATA Dimensions and Weights Length (product): Approx. 2200 mm Width/depth (product): Approx. 1160 mm Height (working): 905 mm Net weight: Approx. 450 kg Jointer Total table length: 2200 mm Nwedpslht Htjfx Af Njb Jointer fence length: 1200 mm Jointer fence height: 150 mm Max. jointer cutting depth: 5 mm Dust extraction Thicknessing extraction port diameter: 1 x 120 mm Thicknesser Table length: 775 mm Working height max.: 240 mm Table width: 410 mm Max. thicknessing cutting depth: 5 mm Min. working height: 3 mm Electrical Data Main drive motor power: 5 kW Mains frequency: 50 Hz Operating voltage: 400 V Cutterblock Type: TERSA Cutterblock speed: 5000 rpm Cutterblock diameter: 95 mm Maximum planing width: 410 mm Number of knives: 4 Feed Feed speed: 6 / 12 m/min SCOPE OF DELIVERY Jointer fence with round rod guide & auxiliary fence Two feed speeds TERSA cutterblock Location: Ex stock 54634 Bitburg - Immediately available -

Sąlyga: naujas, Gamybos metai: 2026, Holzkraft Bandsaw HBS 633 S (IE3) Heavy-duty professional model with quick-release saw blade system for professional users Item number: 5150063 DESCRIPTION Heavy-duty professional design with high net weight for maximum stability Nwsdpfx Asvk Sfbsf Neb Exceptionally smooth and precise operation thanks to the torsion-resistant machine housing Large, one-piece cast iron saw table, tiltable from 0° to +45°, with ground and polished surface Patented table tilt mechanism with handwheel and rack-and-pinion system Quick-release saw blade tensioning Precision saw blade roller guides Rapid and precise cutting height adjustment via handwheel and rack-and-pinion with millimeter scale Safety switch for automatic power-off when doors are opened Large cast parallel fence Supplied with miter gauge as standard Table tilt adjustment via rack-and-pinion system and handwheel TECHNICAL DATA Dimensions and Weights Length (Product) approx. 1190mm Width/Depth (Product) approx. 820mm Height (Product) approx. 2063mm Net weight approx. 377.7kg Extraction Connection Extraction port diameter: 2 x 120mm Work Table(s) Work table length: 830mm Work table width: 600mm Work table height: 830mm Work table tilt: 0 – 45° Explanation for work table tilt: For safety reasons, from an angle of 20°, a retaining device/stop must be fitted to prevent the wood from slipping! Electrical Data Supply voltage: 400V Network frequency: 50Hz Output power: 4.1kW Cutting range Max. cutting height at 90°: 400mm Max. cutting width with fence: 570mm Max. cutting width without fence: 610mm Saw Blade Blade speed(s): 1615m/min Flywheel diameter: 630mm Blade length: 4600mm Blade guides: Precision guides above and below Location: in stock at 54634 Bitburg - immediately available -

Sąlyga: naujas, Gamybos metai: 2025, Raw Air Extraction Unit ASA 163 With standard mobility chassis Dimensions and Weights Chip collection volume: 175 l Suction inlet external diameter: 160 mm Length approx.: 1096 mm Width/Depth approx.: 648 mm Height approx.: 2300 mm Weight approx.: 40 kg Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 2.2 m² Noise Emission Max. sound pressure level: 83 dB(A) Airflow Nominal airflow: 2200 m³/h For milling, planing, and saw chips (not dust) Significantly reduced dust content thanks to BIA-tested filter material with high separation efficiency Housing parts and impellers made of high-strength, special plastic Quick-release fasteners for filter and chip bags for easy maintenance Robust, high-quality construction Easily movable thanks to swivel castors Low power consumption Extraction units comply with dust class L Scope of delivery: System body with pre-assembled fan unit Filter bag / extraction unit Chip bag / extraction unit Nwodohk S S Eopfx Af Neb Without extraction hose

Sąlyga: naujas, Gamybos metai: 2025, Robust steel and cast iron construction With fixed milling spindle 3 spindle speeds from 3,500 to 10,000 rpm Milling spindle with forward and reverse rotation Large, cast-iron milling unit mounted directly to the table Under-table extraction hood for improved dust extraction Solid and precise cast iron table Fast and straightforward speed change Powerful 5.0 kW motor Standard curved milling guard Quality made in Italy Njdpfx Afshp Rcrs Nowb Equipment Details Cast iron milling unit Directly mounted onto the milling table Milling spindle mounted with high-precision ball bearings in the upper position for minimal bearing load and maximum service life 3 milling speeds from 3,500 to 10,000 rpm Powerful Motors Equipped with a high-performance three-phase motor Milling Guard The standard milling guard is supplied as standard for maximum safety, featuring a height-adjustable fence and protective cover. Milling Fence Precise milling fence with quick adjustment and fine adjustment with scale at the fence jaw The integrated extraction port ensures an unobstructed view Milling Table Opening A large table opening allows the use of larger panel cutters, tenoning, and slotting tools above and below the table Curved Milling Guard Included as standard Reversible Fence Jaws Versatile, integrated fence to bridge the tool gap enables safe operation even with narrow workpieces TECHNICAL DATA Dimensions and Weight Weight (net) approx. 240 kg Extraction Connection Extraction port diameter: 2 x 120 mm Work Table Table length: 1,945 mm Table height: 900 mm Table width: 695 mm Installation Information Required length: 1,945 mm Machine body width/depth: 575 mm Required width/depth: 920 mm Working area length: 1,600 mm Explanation required space: The dimensions take into account the maximum travel distances or usable lengths. Working area width/depth: 1,600 mm Machine body length: 1,000 mm Explanation working area: Please add the specified dimensions to the required space to calculate the recommended free setup area for the machine. Electrical Data Supply voltage: 400 V Drive motor power: 5.0 kW Mains frequency: 50 Hz Milling Spindle Usable spindle length: 100 mm Spindle speeds: 3,500/7,000/10,000 rpm Max. spindle protrusion above table: 130 mm Spindle shaft diameter: 30 mm Max. milling tool diameter Max. sinkable tool diameter: 180 mm SCOPE OF DELIVERY Curved milling guard Aluminium fence jaws Table extension left and right Extendable workpiece support

Sąlyga: naujas, Gamybos metai: 2026, Quick-release belt tension via lever Upper belt support with graphite coating 250 mm large, balanced belt rollers provide optimal drive. With electric height adjustment With dust extraction and noise protection systems With noise protection certificate With two speeds Adapts to surfaces using a swiveling sanding shoe Beveled surfaces Standard with right-hand and left-hand rotation The quick-release belt tension allows fast and effortless changing of sanding belts. Delivery is partially assembled Dimensions and weights: Length: approx. 4540 mm Width/depth: approx. 1510 mm Height: approx. 1510 mm Weight: approx. 475 kg Dust extraction connection: Extraction nozzle diameter: 2 x 140 mm Worktable(s): Worktable height adjustment: 620 mm Max. working width on table: 900 mm Electrical data: Height adjustment motor power: 0.37 kW Extraction motor power: 0.75 kW Drive motor power: 3.3 / 4.5 kW Connection voltage: 400 V Phases: 3 Ph Current type: AC Mains frequency: 50 Hz Sanding unit: Sanding belt length: 8100 mm Nwsdpfeff Hdbex Af Neb Sanding belt width: 150 mm Belt speed(s): 9 / 18 m/s Sanding shoe length: 360 mm Sanding shoe width: 150 mm Workpiece: Max. height: 590 mm Max. workpiece height longer than worktable: 180 mm Explanation regarding max. workpiece height longer than worktable: Machining of the workpiece with overhang to the right beyond the worktable is possible.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Planer-thicknesser machine Holzkraft FS 30 Classic Tersa Equipped with Tersa cutter block and quick-change planer blade system The Tersa planer blade system enables blade changes in seconds and ensures exceptionally quiet operation. Helically-toothed steel feed roller for continuous and consistent wood feed Extra-long planer tables Large planer fence remains in place when opening the planer tables Planer tables open towards the rear High machine weight Powerful industrial motor Robust steel and cast iron construction Total table length: 1510 mm Infeed table length / table height: 740 mm / 850 mm Working width: 300 mm Max. cutting depth: 4 mm Thickness table dimensions: 565 x 300 mm Nwsdebuldyopfx Af Nsb Min./max. working height: 3 / 230 mm Feed speed: 7 m/min Cutter block diameter / planer knives: 72 mm / 3 pcs Speed: 5200 rpm Motor 400V/50Hz/S6 - 40%: 4.0 kW (5.5 HP) Extraction port diameter: 2 x 120 mm Scope of delivery: Tersa cutter block, anodized planer fence Available ex-stock Bitburg - immediately available -

Sąlyga: naujas, Gamybos metai: 2025, Clean Air Dust Extractor RLA 160 For wood dust and wood chips, designed for commercial use Article number: 5131620 Brand: Holzkraft For wood chips and wood dust. Designed for industrial/commercial applications. All clean air extraction systems in this series are H3 dust-tested, with residual dust content below 0.1 mg/m³. High extraction performance with minimal space requirement Maximum performance in this class Very quiet Application Clean air dust extraction systems for wood chips and wood dust Designed for commercial/industrial use Suitable for all woodworking machines with matching extraction port diameter Can also be used for multiple dust sources High-quality, well-engineered construction Robust and compact housing made of galvanized sheet steel Extraction port can be easily converted from left to right, offering versatile use Large inspection openings Large-capacity, mobile chip containers with clamping bracket and chip collection bag Unit is fully assembled upon delivery, enabling rapid deployment Mobile Filter Description Ultra-compact with maximum filter area Filter material made of polyester fleece, aluminum-coated, washable, offering long service life Filter supplied as standard in antistatic version, tested and approved to category M-BIA Filter resistance monitored via differential pressure gauge, adjustable warning light on control panel Fan located downstream of the filter Features: New type of locking device for secure container positioning All systems in this series dust-tested to H3, residual dust content below 0.1 mg/m³ Scope of delivery: Metal impeller Inspection opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter 2 fixed and 2 swivel castors with locking brakes Manual filter cleaning Model: RLA 160 Item no.: 5131620 Technical Data Extraction port diameter: 160 mm Nominal airflow: 1448 m³/h Nodecnw T Iopfx Af Nswb Max. airflow: 2400 m³/h Vacuum at nominal flow: 2247 Pa Filter surface: 9.21 m² Filter material: Dust class M Residual dust content: H3 (< 0.1 mg/m³) Filter cleaning: Manual Compressed air supply: – Chip collection volume: 2 x 193 l Mains voltage: 400 V Frequency: 50 Hz Motor power: 2.2 kW Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1681 x 830 x 1654 mm Weight: 254 kg Location: In stock, 54634 Bitburg

Sąlyga: naujas, Gamybos metai: 2025, Holzkraft edge sanding machine: KSO 150 F PRO With oscillating sanding belt for optimum sanding results Article number: 5390020 Brand: Holzkraft Sanding unit can be swiveled using a hand crank The welded steel machine base ensures high torsional rigidity and vibration-free operation Oscillating sanding belt with separate gear motor for superior sanding results Oscillation can be switched on or off as required Sanding pad with graphite coating for extended belt service life Height-adjustable sanding table allows the entire belt width to be utilized Auxiliary table with extraction ports for sanding radii on the rubber-coated deflection roller Sleeve sanding device with attachable worktable Spring-loaded belt tension automatically compensates for belt length differences Adjustable stops make it ideal for veneer sanding The grooved veneer stop allows for precise trimming of the veneer overhang TECHNICAL DATA Dimensions and Weight Length (product) approx. 1700mm Width/Depth (product) approx. 1000mm Height (product) approx. 1150mm Weight (net) approx. 300kg Extraction Connection Number of extraction ports: 2 Extraction port diameter: 100mm Work Table(s) Work table length: 950mm Work table width: 450mm Work table height adjustment: 110mm Electrical Data Supply voltage: 400V Mains frequency: 50Hz Power of oscillation motor: 0.11kW Nwsdpfx Afjv Sk Nns Nob Sanding Unit Sanding belt length: 2640mm Sanding belt width: 150mm Belt speed: 14m/s Oscillation stroke: 15mm Sanding surface length: 800mm Sanding surface width: 150mm Swiveling range of sanding unit: 0 – 45° SCOPE OF DELIVERY 1x sanding belt K100 5x rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm 6x sanding sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm Service tools Mitre gauge

Sąlyga: naujas, Gamybos metai: 2025, Clean Air Dust Extractor: RLA 140 For Wood Dust and Shavings, Designed for Commercial Use Article Number: 5131400 Brand: Holzkraft DESCRIPTION Dust-tested to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic shavings High extraction performance with minimal space requirements Maximum performance in this class Very quiet operation All models equipped with bump protection Application Area Designed for commercial use Nwjdpfx Afsv Sk Tmo Neb For all woodworking machines with a matching extraction nozzle diameter High-quality, sophisticated construction Robust and compact housing made of galvanized steel sheet Extraction nozzle can be converted from left to right without difficulty, ensuring flexible use Large inspection openings Large-capacity, mobile chip containers with clamping bracket and chip collection bag Extractor is delivered fully pre-assembled, allowing for quick commissioning All models are mobile For model RLA 210: optimal chip distribution in the chip containers due to large filter surface Filter Description Ultra-compact with maximum filter area Filter material made of polyester fleece, aluminum-coated for long service life Filter standardly in antistatic design, tested and approved according to category M-BIA The fan is downstream of the filter TECHNICAL DATA Dimensions and Weights Length (product) approx. 1241 mm Width/depth (product) approx. 830 mm Height (product) approx. 1750 mm Weight (net) approx. 210 kg Chip collection volume: 165 l Connection diameter outside extraction nozzle inlet: 140 mm Extraction nozzle axis to floor: 850 mm Electrical Data Connection voltage: 400V Mains frequency: 50 Hz Extraction motor efficiency class: IE3 Drive motor power: 2.2 kW Filter Filter area: 8.5 m² Residual dust content: < 0.1 mg/m³ Filter cleaning: manual Noise Emission Max. sound pressure level: 71 dB(A) Airflow Nominal airflow: 1108 m³/h Max. airflow: 1750 m³/h SCOPE OF DELIVERY Metal impeller Inspection opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter Two fixed and two swivel castors with parking brake Manual cleaning

Sąlyga: naujas, Gamybos metai: 2025, Chip Extraction Unit Nwedpfx Aohk S Stef Neb ASA 7703 Mobile, with 180° rotatable extraction unit For milling, planer, and saw chips (not suitable for dust) 180° rotatable extraction unit allows extraction either from below or above Robust metal impeller Equipped as standard with a high-quality chassis for improved stability and easy maneuverability Quick-release fasteners for filter and chip sacks Fine filter bag, double woven Dimensions and Weights Chip collection volume: 2 x 290 l Outside diameter extraction inlet: 260 mm Outside diameter extraction outlet: 3 x 120 mm, 1 x 100 mm Length approx.: 1900 mm Width/depth approx.: 670 mm Height approx.: 2800 mm Weight approx.: 88 kg Electrical Data No-load speed: 2950 rpm Power consumption: 4.8 kW Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 2 x 5.98 m² Noise Emission Maximum sound pressure level: 98.3 dB(A) Airflow Nominal airflow rate: 7700 m³/h Maximum negative pressure: 2800 Pa Scope of delivery: Two filter bags, two chip sacks Location: Ex stock 54634 Bitburg - available at short notice -

Sąlyga: naujas, Gamybos metai: 2025, Raw Air Extractor ASA 141 With standard chassis Dimensions and Weights Chip collection volume: 175 l Suction inlet diameter (external): 140 mm Length approx.: 1062 mm Width/Depth approx.: 648 mm Height approx.: 2300 mm Weight approx.: 40 kg Electrical Data Connected voltage: 230 V Mains frequency: 50 Hz Filter Nedpfx Ajhk S Swsf Nowb Filter area: 1.9 m² Noise Emission Maximum sound pressure level: 78 dB(A) Airflow Rate Nominal airflow: 1650 m³/h Suitable for milling, planing, and sawing chips (not dust) Significantly reduced dust content due to BIA-tested filter material with a high separation efficiency Housing components and impellers made from high-strength special plastic Quick-release fasteners for easy maintenance of filter and chip bags Robust, high-quality construction Easily maneuverable thanks to swivel castors Low power consumption Extraction systems comply with dust class L Scope of Delivery: Machine body with mounted fan unit Filter bag/extraction unit Chip bag/extraction unit without extraction hose

Sąlyga: naujas, Gamybos metai: 2025, Spindle Moulder Minimax tw 45c With aluminium sliding table and tilting spindle – high performance at a low investment cost Item Number: 5502045 Brand: Holzkraft / SCM TECHNICAL DATA Dimensions and Weights Net weight approx.: 290kg Extraction Connection Extraction port diameter: 2 x 120mm Worktable Worktable length: 1000mm Sliding table length: 1000mm Worktable width: 435mm Sliding table width: 270mm Table height: 900mm Installation Information Required space length: 1945mm Machine body width/depth: 710mm Required space width/depth: 2220mm Working area length: 1600mm Note on required space: The dimensions include maximum travel and usable lengths. Working area width/depth: 1600mm Machine body length: 1000mm Nwodpfx Afehp Rcys Nsb Note on working area: Please add the specified dimensions to the required space to obtain the recommended free installation space for the machine. Electrical Data Supply voltage: 400V Drive motor power: 5.0kW Mains frequency: 50Hz Spindle Spindle tilt: 0 to -45° Spindle speed(s): 3500/7000/10000rpm Usable spindle length: 100mm Spindle shaft diameter: 30mm Max. spindle protrusion above table: 130mm Max. Tool Diameters Max. retractable tool diameter: 180mm Max. tool diameter for tenoning: 275mm Max. tool diameter for profile milling: 210mm SCOPE OF DELIVERY Curved guard hood Anodised aluminium sliding table Telescopic mitre fence Aluminium fence jaws

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, minimax ti 55es LL – Spindle Moulder Image shows T 55 i elite s standard version Professional workshop machine with tilting spindle and 4 speeds. M Digital: motorized height adjustment and tilting. Robust steel and cast iron construction. Large-dimension grey cast iron milling unit, tiltable up to -45° to the rear. Spindle speeds displayed via LEDs. Quick and easy speed change via eccentric clamping. Reversible direction of rotation (right/left). Height and tilt display accurate to 1/10 mm. Heavy-duty industrial fence: with rack-and-pinion fine adjustment, digital display, aluminium fence jaws, 3-position repeat setting for quick adjustment. Scope of delivery: Aluminium fence jaws Curved milling protection hood Table extensions left and right Nwedpfx Afsdqzh Re Nob Model: minimax ti 55es LL Article No.: 5502252 Technical data: Worktable dimensions: 2500 x 655 mm Sliding table dimensions: — Usable spindle length: 125 mm Max. tool diameter: 240 mm Max. retractable tool diameter: 230 mm Max. tenoning cutter diameter: 320 mm Spindle tilting range: 0 to -45 degrees Speeds: 3500/6000/8000/10000 rpm Motor power 400V / 50 Hz / S6-40%: 5.0 kW Extraction port diameter: 2 x 120 mm

Sąlyga: naujas, Gamybos metai: 2025, 4-knife cutterhead for superior planing results Smooth operation thanks to precision unit and heavy cast iron design Front steel feed roller with helical toothing for optimal material feed Satin-finished steel outfeed roller, optionally with rubber roller outfeed The work table is mounted on four oversized columns, ensuring maximum stability under all operating conditions. Planer table height adjustment via handwheel with digital readout (accurate to 0.1 mm) Standard with two feed speeds, conveniently selectable from the operator front High-performance industrial motor Robust steel and cast iron construction Equipment Details: Work Table Mounted on four large-diameter spindles, ensuring maximum stability under all operating conditions Special lifting system maintains table position perfectly, even without locking Tersa Planer Cutterhead No setup or screwing required Knife changes completed in seconds Self-locking system Extremely quiet operation Thickness Table Adjustment for S 41 elite s Via handwheel with digital display for set planing height (accurate to 0.1 mm) Dimensions and Weights Length approx. 900 mm Width/Depth approx. 1070 mm Weight approx. 361 kg Dust Extraction Connection Extraction port diameter thicknessing: 120 mm Drive Performance Main motor: 5 kW Setup Information Required length: 1070 mm Required width/depth: 900 mm Required height: 1100 mm Explanation required space: Dimensions account for maximum travel or usable lengths. Machine Body Length: 1040 mm Machine Body Width/Depth: 900 mm Length: 3000 mm Width: 1600 mm Nwedpfjd Hx Hnsx Af Neb Working Area Explanation: Please add stated values to required space to calculate the total recommended free installation area for the machine. Thicknessing Table Thickness table length: 423 mm Thickness table width: 775 mm Working height min.: 3 mm Working height max.: 240 mm Minimum working length: 180 mm Maximum chip removal: 5 mm Electrical Data Connection voltage: 400 V Planer Cutterhead Type: TERSA Diameter: 95 mm Number of knives: 4 pcs Speed: 5000 rpm Maximum planing width: 410 mm Feed Speed: 6/12 m/min

Sąlyga: naujas, Gamybos metai: 2025, Clean Air Dust Extractor RLA 160 Holzkraft For wood dust and chips, designed for commercial use Item number: 5131620 Brand: Holzkraft Chip Collection Volume: 2 x 165 l Outside Diameter of Extraction Port (Inlet): 160 mm Length approx.: 1,755 mm Width/Depth approx.: 830 mm Height approx.: 1,654 mm Weight approx.: 260 kg Electrical Data Connection Voltage: 400 V Nwodpshkzttofx Af Neb Mains Frequency: 50 Hz Filter Filter Area: 9.21 m² Noise Emission Max. Sound Pressure Level: 73 dB(A) Airflow Rated Airflow: 1,448 m³/h Dust Class: H3 Scope of Delivery: Metal Impeller Fan Inspection Opening for Cleaning the Bypass Filter 5 m Connection Cable with 5-pin CEE Plug and Phase Reverser Two Fixed and Two Swivel Castors with Locking Brakes Manual Filter Cleaning Item No. 5131620 Location: ex stock 54634 Bitburg - Available immediately -

Sąlyga: naujas, Clean air extraction unit / Dust extractor Nwsdper A Eq Rjfx Af Njb Tested for dust class H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum performance in this class Very quiet operation Designed for industrial/commercial use Robust and compact housing made of galvanized sheet steel Extraction nozzle easily reversible from left to right, allowing flexible use Large inspection openings Large-capacity, mobile chip containers with clamping bracket and chip collection bag Dust extractor delivered fully assembled, ready for immediate use All models are mobile Filter material made of polyester fleece, aluminium-coated for extended service life Filters are antistatic as standard, tested and approved to Category M-BIA The fan is positioned downstream of the filter Extraction motor efficiency class: IE3 Rated air flow: 1,448 m³/h Rated negative pressure: 2,242 Pa Drive motor power: 2.2 kW, 400 V, 50 Hz Chip collection volume: 2 x 165 l Outer diameter extraction nozzle (inlet): 160 mm Filter area: 9.21 m² Residual dust content: < 0.1 mg/m³ Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): approx. 1,618 x 830 x 1,653 mm Weight: approx. 268 kg VERSION PM Automatic filter cleaning with pneumatic system that moves a wiper frame

Sąlyga: naudotas, Gamybos metai: 2023, Naudota mašina Pagaminimo metai: 2023 Būklė: beveik nauja, atlikta tik kelios gręžimo operacijos Njdpfx Ajw E Tz Ejf Newb Įranga ir techniniai duomenys: Veleno apsisukimų skaičius: 3 000 aps/min Gręžimo plotis: 240 mm Maks. gręžimo gylis 90°: 180 mm Gręžimo galvutės aukščio reguliavimas: 160 mm Įrankio tvirtinimo diapazonas: 0 – 20 mm Darbinio stalo pasukimas: ±60° Darbinio stalo ilgis: 565 mm Darbinio stalo plotis: 315 mm Ištraukimo jungties diametras: 90 mm Išėjimo galia: 2,2 kW Maitinimo įtampa: 400 V Dažnis: 50 Hz Matmenys: 1 290 × 980 × 1 270 mm Svoris: 260 kg Prieinamumas: galima pristatyti greitai Vieta: Saksonija – Anhaltas

Sąlyga: naudotas, Gamybos metai: 2018, veikimo valandos: 0 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: A031154, Parduodama tvirta ir universali kraštų šlifavimo staklė Holzkraft KSO 1500, idealiai tinkanti profesionaliems medienos apdirbimo darbams. Ši mašina pasižymi pasukamu šlifavimo agregatu, osciliuojančia šlifavimo juosta bei išsamia standartine komplektacija aukščiausiai šlifavimo kokybei pasiekti. Įranga ir funkcijos - Pasukamas šlifavimo agregatas 0–90° Vertikaliems ir horizontaliems šlifavimo darbams, įskaitant fiksacijas ties 0° / 22,5° / 45° / 67,5° / 90° - Osciliuojanti šlifavimo juosta Geresnei šlifavimo kokybei ir ilgesniam tarnavimo laikui - Greito užspaudimo sistema Greitam ir paprastam šlifavimo juostos keitimui - Šlifavimo padas su grafito sluoksniu Sumažina trintį ir pailgina juostos tarnavimo laiką - Aukščio reguliuojamas darbinis stalas iš ketaus Su T formos grioveliu, spyruokline pagalba lengvam aukščio keitimui - Šoninė šlifavimo movų įranga Skirtas apvalumų ir spindulių šlifavimui - Be laipsnių reguliuojamas kampinis liniuotės ribotuvas - Dvi išsiurbimo jungtys Ø 100 mm Nwsdpfxex E Uh To Af Njb

Sąlyga: naujas, Obliavimo ir storinimo staklės HOLZKRAFT fs 30c TERSA - Parodinė mašina - Stalo atidarymas į galą, TERSA obliavimo velenas, įstrižai dantytas padavimo volelis ----- Techniniai duomenys ----- Obliavimo plotis: 300 mm, storinimo stalo matmenys: 565 x 300 mm, stalo ilgis: 1.510 mm, Nsdsu R Sz Topfx Af Njwb didž. medžiagos nuėmimas: 4 mm, veleno Ø: 72 mm, peilių kiekis: 3 vnt., Praėjimo aukštis: 230 mm, min. ruošinio storis: 3 mm, padavimo greitis: 7 m/min., sukimosi greitis: 5.200 aps./min., ištraukimo jungtis Ø: 2 x 120 mm, Variklio galia 400 V: 5,5 AG / 4 kW, Svoris: 270 kg - nauja parodinė mašina -

Sąlyga: naujas, Planer and Thicknesser HOLZKRAFT fs 41es TERSA - Demonstration Machine - ----- Technical Data ----- Planing width: 410 mm Thicknessing table dimensions: 775 x 410 mm Table length: 2,200 mm Max. cutting depth: 5 mm Cutterblock diameter: 95 mm Number of knives: 4 pcs Pass-through height: 240 mm Min. workpiece thickness: 3 mm Njdpfju R S Awjx Af Nowb Feed speed: 6 / 12 m/min Spindle speed: 5,000 rpm Extraction port diameter: 120 mm Motor power (400 V): 6.6 HP / 5.0 kW Weight: 450 kg - Special price - - new demo machine -

Sąlyga: naujas, - Infinitely variable tiltable sanding unit (0 - 90°) for vertical and horizontal sanding - Oscillating sanding belt for improved sanding results and increased belt life - Fast and easy belt change via quick-release system - Standard graphite-coated sanding shoe for increased belt service life - Worktable made of cast iron with T-slot, adjustable via handwheel - Includes lateral sanding drum device for sanding curves and radii - Two extraction ports Ø 100 mm - 1x sanding belt 2750 x 150 mm grit 80 - 1x sanding drum Ø38 mm grit 80 - 1x sanding drum Ø50 mm grit 80 - 1x sanding drum Ø75 mm grit 80 Dimensions and Weights: - Length (product) approx.: 1515 mm - Width/Depth (product) approx.: 550 mm - Height (product) approx.: 1150 mm - Weight (net) approx.: 207 kg Extraction connection: - Extraction port diameter: 100 mm Worktable(s): - Worktable length: 900 mm Nodpfx Afovxkv Ue Nswb - Worktable width: 305 mm - Worktable height adjustment: 120 mm Electrical Data: - Connection voltage: 400 V - Mains frequency: 50 Hz Sanding Unit: - Belt length: 2750 mm - Belt width: 150 mm - Belt speed: 16 m/s - Oscillation stroke: 15 mm - Sanding area length: 1010 mm - Sanding area width: 190 mm - Max. sanding height: 170 mm - Sanding unit swiveling range: 0 – 90° Workpiece: - Max. workpiece width: 1010 mm - Max. workpiece height: 150 mm - new showroom machine -

Sąlyga: naujas, Panel Saw L invincibile si 3 BLADE OFF by Holzkraft BLADE OFF Safety System -Ex-demo machine- ----- Technical Data ----- Mains voltage: 400 V Mains frequency: 50 Hz Scoring saw motor power: 1.3 kW Main saw motor power: 9.0 kW Sliding table length: 3200 mm Nsdpfov Nhg Ssx Af Nswb Sliding table width: 360 mm Table length: 1040 mm Table width: 630 mm Cutting width with rip fence: 1500 mm Max. crosscut width left of the saw blade: 3200 mm Edging length: 3200 mm Saw blade tilt: 90 – 45° Max. cutting height at 90° with 400mm blade: 120 mm Max. cutting height at 45° with 400mm blade: 89 mm Saw blade speed: 3000 – 5000 rpm Scoring blade diameter: 120 mm Scoring blade speed: 8500 rpm Approx. length: 7250 mm Approx. width/depth: 4460 mm Approx. height: 1770 mm Net weight: approx. 1307 kg Extraction port Ø: 100 and 120 mm The BLADE OFF system detects potential hazardous situations in advance and prevents them by retracting the saw blade into the machine table within fractions of a second. Using sensors, the system can distinguish between workpieces and the operator. An LED light in the saw blade guard indicates with a green light when the safety system is active. Control via 15” eye-S operating console. Compatible with SCM Thundercut (optimizer/process control app). Three longitudinal fences with integrated digital readouts. Electrically adjustable rip fence. Start/stop buttons for main and scoring blade integrated into the sliding table. Special guides and an innovative curved grind deliver four times higher load capacity on the crosscut carriage. Ball-bearing telescopic arm for improved stability and effortless workpiece guidance. Equipment Two-axis scoring unit with automatic positioning Anodized aluminium sliding table On/off switch on the sliding table for main and scoring blade motors Crosscut frame with angle-adjustable aluminium telescopic fence Material roller on crosscut frame Motorized rip fence, adjustable via control panel Three longitudinal stops with integrated digital readouts Eccentric clamp Electronic control for saw blade height and tilt and for rip fence Swiveling control panel (mounted above) Table extension Table widening Saw blade swing-away guard - new ex-demo machine -

Sąlyga: naujas, Bandsaw HOLZKRAFT HBS 433 - Exhibition machine - Upper and lower saw blade guides, Quick-release device with eccentric lever ----- Technical specifications ----- Wheel diameter: 430 mm, Max. cutting height: 270 mm, Max. cutting width with fence: 370 mm, Max. cutting width without fence: 410 mm, Max. blade length: 3,345 mm, Table size: 610 x 431 mm, Table tilt: -10 to +45°, Motor 400 V: 1.5 kW, Extraction ports: 2 x 120 mm, Cutting speed: 900 / 450 m/min, Dimensions (LxWxH): 768 x 512 x 2,048 mm, Weight: 130 kg Scope of delivery: 3 bandsaw blades, 6 / 16 / 25 mm - new exhibition machine - Nwodpfx Aju R S Aksf Nob

Sąlyga: naujas, Edge banding machine minimax me 35 tr s Holzkraft -Exhibition machine- Njdpfx Asv Nhhpef Nswb This offer is for an equipment package. The following items and options are already included in the price: - new exhibition machine -

Sąlyga: naujas, Sliding Table Spindle Moulder HOLZKRAFT t 45c LL With table extension on both right and left sides, as well as a pull-out workpiece support ----- Technical Data ----- Table size: 1,945 x 695 mm, Nsdpfx Afju U Rfpj Njwb Max. spindle projection above table: 130 mm, Usable spindle length: 100 mm, Max. retractable cutter diameter: 180 mm, Speeds: 3,500 / 7,000 / 10,000 rpm, Motor 400 V: 6.6 HP / 5.0 kW, Extraction port diameter: 2 x 120 mm - Special Offer Price - - New display machine -