Holzkraft Sc 2 pirkti naudotą (223)

Sąlyga: naujas, Gamybos metai: 2025, Vertical design for splitting short and meter-length logs Low base plate for easy, ergonomic loading of large trunks Mechanical log-lifting device positions heavy logs in a back-friendly manner Equipped with log retaining bracket Quick, tool-free adjustment of splitting height Powerful industrial hydraulic system Phase inverter on all 400 V models Two-hand safety operation Easy transport with manual drawbar via standard chassis with solid rubber wheels and additional support wheel Impact- and scratch-resistant thanks to high-quality powder coating Space-saving storage due to easy lowering cylinder Hjdpfx Acjhkz Hmjuenu Dimensions and Weights Length approx. 1440 mm Width/Depth approx. 1350 mm Height approx. 2280 mm Weight approx. 185 kg Drive Drive type: Electric motor Rated power: 3.5 kW Electrical Data Supply voltage: 400 V Mains frequency: 50 Hz Machine Data Maximum splitting force: 14 t Minimum splitting length: 560 mm Maximum splitting length: 1040 mm Minimum log diameter: 100 mm Maximum log diameter: 300 mm Hydraulic System Hydraulic oil tank capacity: 7.5 l Location: Ex stock 54634 Bitburg - Immediately available - Subject to prior sale

Sąlyga: naujas, Gamybos metai: 2025, Chip Extraction Unit ASA 2803 Hnedpfx Acshk S Sdoueu Mobile, with 180° rotatable extraction unit For chips produced by milling, planing, and sawing (not suitable for dust) 180° rotatable extraction unit allows chip extraction from above or below Durable metal impeller Equipped as standard with a high-quality chassis for improved stability and easy maneuvering Quick-release fasteners for filter and chip collection bags Fine filter bag, double-woven Dimensions and weights Chip collection volume 2 x 120 l External diameter extraction inlet 203 mm External diameter extraction outlet 1 x 100, 2 x 120 mm Length approx. 1500 mm Width/depth approx. 500 mm Height approx. 2100 mm Weight approx. 53 kg Electrical data No-load speed 2950 rpm Power consumption 2.2 kW Connection voltage 400 V Mains frequency 50 Hz Filter Filter area 2 x 1.92 m² Noise emission Sound pressure level max. 87.5 dB(A) Volume flow Nominal air flow 2800 m³/h Max. negative pressure 1900 Pa Scope of delivery: Two filter bags, two chip collection bags Location: In stock at 54634 Bitburg - Available immediately -

Sąlyga: naujas, Gamybos metai: 2025, Chip Extraction Unit ASA 1903 Mobile, with 180° rotatable extraction unit For milling, planing, and sawing chips (not suitable for dust) 180° rotatable extraction unit allows extraction from below or above Robust metal impeller Standard equipped with a high-quality chassis for improved stability and easy maneuvering Quick-release fasteners for filter and chip bags Fine filter bag, double woven Dimensions and Weights Chip collection volume: 110 l Outer nominal diameter, extraction inlet: 203 mm Outer nominal diameter, extraction outlet: 1 x 100 mm, 1 x 120 mm Length approx.: 1000 mm Width/Depth approx.: 500 mm Height approx.: 2100 mm Weight approx.: 39 kg Electrical Data No-load speed: 2950 min⁻¹ Power input: 1.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 1.92 m² Noise Emission Max. sound pressure level: 85.7 dB(A) Hedpfehk S Shjx Acujnu Airflow Rated airflow: 1900 m³/h Max. negative pressure: 1700 Pa Scope of delivery: Filter bag, chip bag Location: Ex-stock 54634 Bitburg - immediately available -

Sąlyga: naujas, Gamybos metai: 2025, Chip Extraction Unit ASA 4303 Mobile, with 180° rotatable extraction unit Designed for milling, planing, and saw chips (not suitable for dust) The 180° rotatable extraction unit allows chip removal from below or above Stable metal impeller Supplied as standard with a high-quality chassis for increased stability and easy maneuvering Quick-release closures for filter and chip bags Fine filter bag, double woven Dimensions and Weights Chip collection volume: 2 x 215 l External diameter suction inlet: 260 mm External diameter suction outlet: 2 x 100, 2 x 120 mm Length approx.: 1700 mm Width/Depth approx.: 600 mm Height approx.: 2400 mm Weight approx.: 69 kg Electrical Data No-load speed: 2950 rpm Power consumption: 3.8 kW Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 2 x 2.4 m² Noise Emission Sound pressure level max.: 89.9 dB(A) Volume Flow Rated air flow: 4300 m³/h Maximum negative pressure: 2000 Pa Scope of delivery: Two filter bags, two chip bags Location: Ex stock 54634 Bitburg - immediately available - Hnjdpjhk S Slefx Acusu

Sąlyga: naujas, Gamybos metai: 2022, Drilling depth: 170 mm Drilling width: 250 mm Spindle speed: 2,800 rpm HOLZKRAFT Mortising Machine LLB 30 Entry-level mortising machine with single-lever operation, eccentric clamp, dowel boring device, and handwheel-operated drill head height adjustment with digital display for fast and precise work. Worktable (L x W): 580 x 300 mm Drilling width: 250 mm Drilling depth (at 90°): 170 mm Drill head height adjustment: 200 mm Worktable swivel range: non-rotatable Tool holder: WESCOTT drill chuck Clamping range: Ø 0 - 20 mm Spindle speed: 2,800 rpm Motor power: 2.2 kW | 400 V – 50 Hz Extraction port: Ø 70 mm Dimensions (L x W x H): 1500 x 920 x 1400 mm Net weight: approx. 160 kg Includes dowel boring device, eccentric clamp, digital height adjustment display, Wescott drill chuck 0-20 mm HOLZKRAFT Mortising Machine LLB 30 – Entry-level machine for professional mortising – Made in EU Hnjdpfx Aeih H A Rjcusu Easy operation with single-lever control for fast and precise work Drill head with hardened prism guides and ball contact bearing system Drill head height adjustment with handwheel and digital readout Manual eccentric clamp Robust steel and cast-iron construction Powerful three-phase motor Dowel device with indexing positions: 16 | 22 | 27 | 32 mm Clamping stops for quick and easy adjustment of the drill head travel Scope of delivery HOLZKRAFT Mortising Machine LLB 30 Drill head height adjustment with handwheel and digital display Dowel boring device with index Eccentric clamp Wescott drill chuck 0 - 20 mm Operating manual with exploded views, spare parts lists, and CE certificate of conformity Location: Ex stock 54634 Bitburg - immediately available -

Sąlyga: naujas, Gamybos metai: 2025, Holzkraft Band Saw HBS 533 S. Heavy-duty professional version with high dead weight for maximum running smoothness Exceptionally smooth and precise operation thanks to a torsion-resistant machine housing Large-sized cast iron saw table made from a single piece, tiltable from 0° to +20°, ground and polished surface Patented table tilting device with handwheel and rack-and-pinion Quick-release saw blade tensioning Ceramic blade roller guides Large cast-iron parallel fence Fast and precise cutting height adjustment via handwheel and rack, with millimeter scale Safety switch for automatic shut-off when opening the door Large cast-iron parallel fence Supplied as standard with mitre gauge Cast iron flywheels with special coating on running surfaces Viewing window for checking the saw blade tracking Professional saw table guidance The heavy, solid cast iron saw table is easily and conveniently adjusted via a handwheel and rack-and-pinion guidance Infinitely variable tilt from 0° to +20° Patented Work table dimensions 750 x 530 mm Hnedpfsb S Uzkex Acuju Cutting speed 1400 m/min. Flywheel diameter 530 mm Maximum cutting height 350 mm Maximum cutting width with fence 465 mm Maximum cutting width without fence 510 mm Bandsaw blade length 4190 mm Precision blade guide Top / bottom Saw table tilt 0° - +45° Motor power 400 V/50 Hz/P2 4.0 kW Weight 305 kg Dimensions 1000 x 720 x 2040 Extraction port diameter 2 x 100 mm Location: Ex stock Bitburg

Gamybos metai: 2025, Sąlyga: beveik kaip naujas (parodų įrenginys), Professional Workbenches Precision-crafted and carefully finished Constructed entirely from steamed, solid beechwood Hnjdpfx Acoc Uydaeueu All critical edges are rounded Surfaces are oiled with environmentally friendly oil Standard with integrated tool drawer The two guide rods on the vices are precisely and sturdily guided in a cast part Equipped with a smooth-running trapezoidal thread spindle Features French front vice and German tail vice with linear guidance, two short round bench dogs, two long round bench dogs, a drawer, and additional compartment Finger-jointing (box joints) on tail vice and back of the storage compartment Worktop length without vices: 1915 mm Worktop width/depth without vices: 615 mm Working height: 870 mm Front vice length: 520 mm Tail vice length: 450 mm Front vice width: 70 mm Tail vice width: 140 mm Front vice clamping width: 190 mm Tail vice clamping width: 180 mm Front vice clamping width to center of round dog: 225 mm Tail vice clamping width to center of round dog: 265 mm Top thickness: 50 mm Product length: 2120 mm Product width/depth: 790 mm Product height: 870 mm Net weight: 91 kg Location: Available from stock, 54634 Bitburg

Sąlyga: naujas, Gamybos metai: 2025, Heavy-duty machine base ensures high torsional rigidity and vibration-free operation Improved grinding results thanks to sanding belt oscillation powered by a separate geared motor Oscillation can be switched on or off as required Standard veneer edge sanding unit with fine adjustment Grooved infeed fence for sanding excess veneer edges Quick changeover from veneer to solid wood sanding Height-adjustable sanding table for use of the entire sanding belt width Height adjustment of the sanding table and sanding unit tilt via handwheels Height-adjustable auxiliary table with extraction for sanding radii Optimal chip removal via extraction at the unit and the cross table Hsdpfxeff Ed Tj Acuenu Automatic compensation of belt length differences with spring-loaded belt tension Dimensions and Weight Length approx. 1900 mm Width/depth approx. 810 mm Height approx. 1230 mm Weight approx. 290 kg Dust Extraction Connection Extraction port diameter: 120 mm Drive Power Oscillation motor: 0.25 kW Work Table(s) Worktable length: 960 mm Worktable width: 352 mm Worktable height adjustment: 210 mm Cross table minimum height: 730 mm Electrical Data Absorbed power: 3 kW Connection voltage: 400 V Phases: 3 Ph Current type: AC Mains frequency: 50 Hz Sanding Unit Sanding belt length: 3000 mm Sanding belt width: 150 mm Belt speed: 20 m/s Sanding area length: 1050 mm Sanding area width: 220 mm Swivel range: 0 – 45° Oscillation stroke: 20 mm Availability: Short-term

Sąlyga: naujas, Gamybos metai: 2025, Robust construction allows processing of longer workpieces. Swiveling sanding unit, can also be used as an edge sanding machine. 225 mm large, balanced belt rollers ensure vibration-free drive. Easy sanding belt adjustment. High belt speed of 17 m/s. Reversible drive direction (left/right). Upper sanding shoe with graphite coating. Sanding shoe with 4-point suspension. Includes movable sanding shoe for bevelled surfaces. Smooth-running sanding table, even under heavy load from large workpieces. Excellent price-performance ratio. Additional ESE Equipment Hedpfjff Hdfjx Acuonu Standard with electric table height adjustment. Split table folds up for special edge sanding applications. Drawer-type sanding attachment. Integrated worktable lighting. Equipment Details 225 mm large, balanced belt rollers ensure optimal, vibration-free drive. Belt speed: 17 m/s. With swiveling professional sanding shoe for bevelled surfaces, 4-point suspension. Standard with electric table height adjustment. Ergonomically positioned controls on a separate control panel. Standard with drawer-type sanding attachment. Split table folds up for specialized edge sanding applications. Dimensions and Weight Length approx. 3750 mm Width/depth approx. 1250 mm Height approx. 1730 mm Weight approx. 520 kg Dust Extraction Connection Extraction port diameter: 160 / 160 mm Worktable(s) Table height adjustment: 550 mm Table traverse: 690 mm Electrical Data Table height adjustment motor power: 0.37 kW Main drive motor power: 3.0 kW Connection voltage: 400 V Phases: 3 Ph Current type: AC Mains frequency: 50 Hz Sanding Unit Sanding belt length: 7000 mm Sanding belt width: 150 mm Belt running speed: 17 m/s Sanding shoe length: 270 mm Sanding shoe width: 150 mm

Sąlyga: naujas, Gamybos metai: 2025, Designed for professional structuring and sanding tasks Motorized height adjustment of the working units with digital readout Units can be activated individually High-durability rubberized conveyor belt Infinitely variable feed speed Constant infeed height STR L models feature infinitely variable, inverter-controlled brush speed: this enables precise speed adjustment to the material, making it especially suitable for sensitive materials. Unit for saw-cut finish available as an option Motorized height adjustment of the units Units can be switched on individually Feed rate continuously adjustable Dimensions and Weights Length approx. 1300 mm Width/depth approx. 1000 mm Height approx. 1300 mm Weight approx. 440 kg Dust Extraction Connection Extraction nozzle diameter: 2 x 150 mm Brushes Diameter: 190 mm Length: 300 mm Rotation: 1500 min⁻¹ Electrical Data Drive motor power: 2 x 3.0 kW Feed motor power: 0.22 kW Total connected load: 6.25 kW Rated voltage: 400 V Phases: 3 Ph Current type: AC Network frequency: 50 Hz Noise Emission Hjdpfxjff Hdgs Acusnu Sound power level Lw (idle, without extraction): 65 dB(A) Sanding Unit Max. sanding width: 300 mm Feed Unit Feed speed: 1 – 13 m/min Workpiece Max. height: 300 mm Max. weight: 100 kg

Sąlyga: naujas, Gamybos metai: 2025, Raw Air Extraction Unit ASA 203 With integrated transport frame Dimensions and Weights Chip collection volume: 175 l External diameter of extraction nozzle (inlet): 200 mm Length approx.: 1,061 mm Width/depth approx.: 577 mm Height approx.: 2,300 mm Hnjdpfxehk S Szj Acuou Weight approx.: 60 kg Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 2.2 m² Noise Emission Maximum sound pressure level: 84 dB(A) Airflow Rated air volume flow: 2,500 m³/h Suitable for chips from milling, planing and sawing (not for dust) Significantly reduced dust content thanks to BIA-certified filter material with high separation efficiency Housing components and impellers made of high-strength special plastic Quick-release fasteners for filter and chip bags for hassle-free maintenance Rugged, high-quality construction Easy to manoeuvre thanks to swivel castors Low power consumption Extraction units comply with dust class L Scope of delivery: Unit body with mounted fan assembly Filter bag / extraction unit Chip bag / extraction unit Without extraction hose

Sąlyga: naujas, Gamybos metai: 2025, Planer-thicknesser Minimax FS 41es TERSA Maximum equipment for professionals. Article number: 5503431 Brand: Holzkraft / SCM Helical-toothed steel feed roller for consistent and even material feed, allowing planing from as little as 0.2 mm chip removal (at minimum workpiece thickness of 3 mm) – ideal for economical planing of precious hardwoods. Models with TERSA cutterblock enable blade changes within seconds and operate with particularly low noise. Material feed with two speeds. Extra-long planer tables for easy and precise alignment of workpieces. Tables made from cast iron, annealed and stress-free for durability and long-term flatness. Simultaneously opening, rear-hinged jointer tables for short setup times. Thickness table adjustment via handwheel with digital height display. High machine weight for maximum precision and smooth operation. Powerful industrial motor. Robust steel/cast iron construction. Quality – Made in Italy. Hsdpfx Acelht Htjuonu TECHNICAL DATA Dimensions and Weights Length (product): Approx. 2200 mm Width/depth (product): Approx. 1160 mm Height (working): 905 mm Net weight: Approx. 450 kg Jointer Total table length: 2200 mm Jointer fence length: 1200 mm Jointer fence height: 150 mm Max. jointer cutting depth: 5 mm Dust extraction Thicknessing extraction port diameter: 1 x 120 mm Thicknesser Table length: 775 mm Working height max.: 240 mm Table width: 410 mm Max. thicknessing cutting depth: 5 mm Min. working height: 3 mm Electrical Data Main drive motor power: 5 kW Mains frequency: 50 Hz Operating voltage: 400 V Cutterblock Type: TERSA Cutterblock speed: 5000 rpm Cutterblock diameter: 95 mm Maximum planing width: 410 mm Number of knives: 4 Feed Feed speed: 6 / 12 m/min SCOPE OF DELIVERY Jointer fence with round rod guide & auxiliary fence Two feed speeds TERSA cutterblock Location: Ex stock 54634 Bitburg - Immediately available -

Sąlyga: naujas, Gamybos metai: 2025, Holzkraft HBS Precision Wood Band Saws for Craftsmen – Top Quality, Workmanship, and Value for Money Exceptionally smooth and precise operation thanks to a torsion-resistant machine housing. Large, one-piece grey cast iron saw table with a precisely ground and polished surface. Quick-release saw blade tensioning via eccentric lever on the rear of the machine. Supplied as standard with two speeds. Precise 3-roller blade guides, standard top and bottom from model HBS 351 upwards. Rapid cutting height adjustment via rotary knob and rack-and-pinion system with millimeter scale. Easy-glide aluminum parallel fence with quick-release eccentric clamping and magnifier. Standard mitre fence, adjustable ±60° on both sides. Aluminum parallel fence with quick-release eccentric clamping. Technical Specifications: Worktable dimensions: 610 x 431 mm Cutting speed: 900/450 m/min Flywheel diameter: 430 mm Max. cutting height: 270 mm Hedpfx Ajvk Sd Docuonu Max. cutting width with fence: 370 mm; without fence: 410 mm Blade length: 3345 mm Precision 3-roller guide: top/bottom Saw table tilt: -10°, +45° Motor power: 1550 Watt/400 Volt Weight: 130 kg Dimensions (mm): 680 x 512 x 2048 Extraction port diameter: 2 x 100 mm Location: ex stock 54634 Bitburg - Immediately available -

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Planer-thicknesser machine Holzkraft FS 30 Classic Tersa Equipped with Tersa cutter block and quick-change planer blade system The Tersa planer blade system enables blade changes in seconds and ensures exceptionally quiet operation. Helically-toothed steel feed roller for continuous and consistent wood feed Extra-long planer tables Large planer fence remains in place when opening the planer tables Planer tables open towards the rear High machine weight Powerful industrial motor Robust steel and cast iron construction Total table length: 1510 mm Hnjdpfx Asbuldyecuju Infeed table length / table height: 740 mm / 850 mm Working width: 300 mm Max. cutting depth: 4 mm Thickness table dimensions: 565 x 300 mm Min./max. working height: 3 / 230 mm Feed speed: 7 m/min Cutter block diameter / planer knives: 72 mm / 3 pcs Speed: 5200 rpm Motor 400V/50Hz/S6 - 40%: 4.0 kW (5.5 HP) Extraction port diameter: 2 x 120 mm Scope of delivery: Tersa cutter block, anodized planer fence Available ex-stock Bitburg - immediately available -

Sąlyga: naujas, Gamybos metai: 2025, Clean Air Dust Extractor RLA 160 For wood dust and wood chips, designed for commercial use Article number: 5131620 Brand: Holzkraft For wood chips and wood dust. Designed for industrial/commercial applications. All clean air extraction systems in this series are H3 dust-tested, with residual dust content below 0.1 mg/m³. High extraction performance with minimal space requirement Maximum performance in this class Very quiet Application Clean air dust extraction systems for wood chips and wood dust Designed for commercial/industrial use Suitable for all woodworking machines with matching extraction port diameter Can also be used for multiple dust sources High-quality, well-engineered construction Hnsdpfx Acjcnw T Iouou Robust and compact housing made of galvanized sheet steel Extraction port can be easily converted from left to right, offering versatile use Large inspection openings Large-capacity, mobile chip containers with clamping bracket and chip collection bag Unit is fully assembled upon delivery, enabling rapid deployment Mobile Filter Description Ultra-compact with maximum filter area Filter material made of polyester fleece, aluminum-coated, washable, offering long service life Filter supplied as standard in antistatic version, tested and approved to category M-BIA Filter resistance monitored via differential pressure gauge, adjustable warning light on control panel Fan located downstream of the filter Features: New type of locking device for secure container positioning All systems in this series dust-tested to H3, residual dust content below 0.1 mg/m³ Scope of delivery: Metal impeller Inspection opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter 2 fixed and 2 swivel castors with locking brakes Manual filter cleaning Model: RLA 160 Item no.: 5131620 Technical Data Extraction port diameter: 160 mm Nominal airflow: 1448 m³/h Max. airflow: 2400 m³/h Vacuum at nominal flow: 2247 Pa Filter surface: 9.21 m² Filter material: Dust class M Residual dust content: H3 (< 0.1 mg/m³) Filter cleaning: Manual Compressed air supply: – Chip collection volume: 2 x 193 l Mains voltage: 400 V Frequency: 50 Hz Motor power: 2.2 kW Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1681 x 830 x 1654 mm Weight: 254 kg Location: In stock, 54634 Bitburg

Sąlyga: naujas, Gamybos metai: 2025, Designed for professional structuring and sanding work Motorized height adjustment of the working units with digital display Units can be activated individually Highly durable rubberized conveyor belt Infinitely variable feed Constant infeed height STR L models with infinitely variable, inverter-controlled brush speed: this allows precise speed adjustment to the material, making them particularly suitable for sensitive materials. Unit for saw-cut appearance optionally available Dimensions and Weights Length approx. 1300 mm Width/Depth approx. 1000 mm Height approx. 1300 mm Weight approx. 440 kg Dust Extraction Connection Extraction port diameter: 2 x 150 mm Brushes Diameter: 190 mm Length: 300 mm Speed: 1500 rpm Electrical Data Drive motor power: 2 x 3.0 kW Feed motor power: 0.22 kW Connected load: 6.25 kW Connection voltage: 400 V Phases: 3 Ph Current type: AC Mains frequency: 50 Hz Noise Emission Sound power level Lw (idle without extraction): 65 dB(A) Sanding Unit Max. sanding width: 300 mm Feed Unit Feed speed: 1 – 13 m/min Hnsdoff Hdiepfx Acusu Workpiece Max. height: 300 mm Max. weight: 100 kg

Sąlyga: naujas, Gamybos metai: 2025, Raw Air Extraction Unit ASA 163 With standard mobility chassis Dimensions and Weights Chip collection volume: 175 l Suction inlet external diameter: 160 mm Length approx.: 1096 mm Width/Depth approx.: 648 mm Height approx.: 2300 mm Weight approx.: 40 kg Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 2.2 m² Noise Emission Max. sound pressure level: 83 dB(A) Airflow Nominal airflow: 2200 m³/h For milling, planing, and saw chips (not dust) Significantly reduced dust content thanks to BIA-tested filter material with high separation efficiency Housing parts and impellers made of high-strength, special plastic Quick-release fasteners for filter and chip bags for easy maintenance Robust, high-quality construction Hnsdshk S S Eopfx Acuou Easily movable thanks to swivel castors Low power consumption Extraction units comply with dust class L Scope of delivery: System body with pre-assembled fan unit Filter bag / extraction unit Chip bag / extraction unit Without extraction hose

Sąlyga: naujas, Gamybos metai: 2025, Robust steel and cast iron construction With fixed milling spindle 3 spindle speeds from 3,500 to 10,000 rpm Milling spindle with forward and reverse rotation Large, cast-iron milling unit mounted directly to the table Under-table extraction hood for improved dust extraction Solid and precise cast iron table Fast and straightforward speed change Powerful 5.0 kW motor Standard curved milling guard Quality made in Italy Equipment Details Cast iron milling unit Directly mounted onto the milling table Milling spindle mounted with high-precision ball bearings in the upper position for minimal bearing load and maximum service life 3 milling speeds from 3,500 to 10,000 rpm Powerful Motors Equipped with a high-performance three-phase motor Milling Guard The standard milling guard is supplied as standard for maximum safety, featuring a height-adjustable fence and protective cover. Milling Fence Precise milling fence with quick adjustment and fine adjustment with scale at the fence jaw The integrated extraction port ensures an unobstructed view Milling Table Opening A large table opening allows the use of larger panel cutters, tenoning, and slotting tools above and below the table Curved Milling Guard Included as standard Reversible Fence Jaws Versatile, integrated fence to bridge the tool gap enables safe operation even with narrow workpieces TECHNICAL DATA Dimensions and Weight Weight (net) approx. 240 kg Extraction Connection Extraction port diameter: 2 x 120 mm Work Table Table length: 1,945 mm Table height: 900 mm Table width: 695 mm Installation Information Required length: 1,945 mm Machine body width/depth: 575 mm Required width/depth: 920 mm Working area length: 1,600 mm Explanation required space: The dimensions take into account the maximum travel distances or usable lengths. Working area width/depth: 1,600 mm Machine body length: 1,000 mm Explanation working area: Please add the specified dimensions to the required space to calculate the recommended free setup area for the machine. Electrical Data Supply voltage: 400 V Drive motor power: 5.0 kW Mains frequency: 50 Hz Milling Spindle Usable spindle length: 100 mm Spindle speeds: 3,500/7,000/10,000 rpm Max. spindle protrusion above table: 130 mm Spindle shaft diameter: 30 mm Max. milling tool diameter Max. sinkable tool diameter: 180 mm SCOPE OF DELIVERY Curved milling guard Aluminium fence jaws Table extension left and right Extendable workpiece support Hodpfshp Rcrsx Acuenu

Sąlyga: naujas, Gamybos metai: 2024, Holzkraft Edge Sander Model: KSO 200 F with Veneer Sanding Attachment Sanding unit tiltable up to 45° via lever The machine base, made of welded steel, ensures high torsional rigidity and vibration-free operation. Oscillating sanding belt with separate geared motor for improved sanding results Oscillation can be switched on or off as needed Graphite-coated platen for longer sanding belt service life Height-adjustable sanding table for full utilization of the belt width Height-adjustable auxiliary table with extraction for sanding radii Spring-loaded belt tensioner automatically compensates for belt length differences Double extraction ports Extendable roller table extension Sanding drum with rubber coating Veneer edge sanding device with contact shoe featuring fine adjustment, support rollers, and stop rulers Grooved infeed ruler for veneer overhangs Quick changeover from veneer edge sanding to solid wood sanding Dimensions and Weights Length approx. 1900 mm Width/Depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Dust Extraction Connection Extraction port diameter 140 / 100 mm Drive Power Oscillation motor 0.25 kW Work Table(s) Work table length 960 mm Work table width 350 mm Work table height adjustment 230 mm Min. table height 735 mm Max. table height 965 mm Long table height adjustment 230 mm Cross table length 330 mm Cross table width 330 mm Cross table min. height 720 mm Cross table max. height 900 mm Cross table height adjustment 180 mm Electrical Data Main drive motor power 3.0 kW Supply voltage 400 V Sanding Unit Sanding belt length 3000 mm Sanding belt width 200 mm Belt speed 20 m/s Sanding area length 1050 mm Sanding area width 200 mm Oscillation stroke 20 mm Location: In stock at 54634 Bitburg - immediately available - Hsdpfxelht H Nj Acuonu

Sąlyga: naujas, Gamybos metai: 2025, Holzkraft Bandsaw HBS 633 S (IE3) Heavy-duty professional model with quick-release saw blade system for professional users Item number: 5150063 DESCRIPTION Heavy-duty professional design with high net weight for maximum stability Exceptionally smooth and precise operation thanks to the torsion-resistant machine housing Large, one-piece cast iron saw table, tiltable from 0° to +45°, with ground and polished surface Patented table tilt mechanism with handwheel and rack-and-pinion system Quick-release saw blade tensioning Precision saw blade roller guides Rapid and precise cutting height adjustment via handwheel and rack-and-pinion with millimeter scale Safety switch for automatic power-off when doors are opened Large cast parallel fence Supplied with miter gauge as standard Table tilt adjustment via rack-and-pinion system and handwheel TECHNICAL DATA Dimensions and Weights Length (Product) approx. 1190mm Width/Depth (Product) approx. 820mm Height (Product) approx. 2063mm Net weight approx. 377.7kg Extraction Connection Extraction port diameter: 2 x 120mm Work Table(s) Work table length: 830mm Work table width: 600mm Hjdpfx Aevk Sfbscuonu Work table height: 830mm Work table tilt: 0 – 45° Explanation for work table tilt: For safety reasons, from an angle of 20°, a retaining device/stop must be fitted to prevent the wood from slipping! Electrical Data Supply voltage: 400V Network frequency: 50Hz Output power: 4.1kW Cutting range Max. cutting height at 90°: 400mm Max. cutting width with fence: 570mm Max. cutting width without fence: 610mm Saw Blade Blade speed(s): 1615m/min Flywheel diameter: 630mm Blade length: 4600mm Blade guides: Precision guides above and below Location: in stock at 54634 Bitburg - immediately available -

Sąlyga: naujas, Gamybos metai: 2025, Chip Extraction Unit ASA 7703 Mobile, with 180° rotatable extraction unit For milling, planer, and saw chips (not suitable for dust) 180° rotatable extraction unit allows extraction either from below or above Robust metal impeller Equipped as standard with a high-quality chassis for improved stability and easy maneuverability Quick-release fasteners for filter and chip sacks Fine filter bag, double woven Dimensions and Weights Chip collection volume: 2 x 290 l Outside diameter extraction inlet: 260 mm Outside diameter extraction outlet: 3 x 120 mm, 1 x 100 mm Length approx.: 1900 mm Width/depth approx.: 670 mm Height approx.: 2800 mm Weight approx.: 88 kg Electrical Data No-load speed: 2950 rpm Power consumption: 4.8 kW Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 2 x 5.98 m² Hnjdpfjhk S Stjx Acuju Noise Emission Maximum sound pressure level: 98.3 dB(A) Airflow Nominal airflow rate: 7700 m³/h Maximum negative pressure: 2800 Pa Scope of delivery: Two filter bags, two chip sacks Location: Ex stock 54634 Bitburg - available at short notice -

Sąlyga: naujas, Gamybos metai: 2025, Raw Air Extractor ASA 141 Hsdpfx Acohk S Swjusnu With standard chassis Dimensions and Weights Chip collection volume: 175 l Suction inlet diameter (external): 140 mm Length approx.: 1062 mm Width/Depth approx.: 648 mm Height approx.: 2300 mm Weight approx.: 40 kg Electrical Data Connected voltage: 230 V Mains frequency: 50 Hz Filter Filter area: 1.9 m² Noise Emission Maximum sound pressure level: 78 dB(A) Airflow Rate Nominal airflow: 1650 m³/h Suitable for milling, planing, and sawing chips (not dust) Significantly reduced dust content due to BIA-tested filter material with a high separation efficiency Housing components and impellers made from high-strength special plastic Quick-release fasteners for easy maintenance of filter and chip bags Robust, high-quality construction Easily maneuverable thanks to swivel castors Low power consumption Extraction systems comply with dust class L Scope of Delivery: Machine body with mounted fan unit Filter bag/extraction unit Chip bag/extraction unit without extraction hose

Sąlyga: naujas, Gamybos metai: 2025, Holzkraft edge sanding machine: KSO 150 F PRO With oscillating sanding belt for optimum sanding results Article number: 5390020 Brand: Holzkraft Sanding unit can be swiveled using a hand crank The welded steel machine base ensures high torsional rigidity and vibration-free operation Oscillating sanding belt with separate gear motor for superior sanding results Oscillation can be switched on or off as required Sanding pad with graphite coating for extended belt service life Height-adjustable sanding table allows the entire belt width to be utilized Auxiliary table with extraction ports for sanding radii on the rubber-coated deflection roller Sleeve sanding device with attachable worktable Spring-loaded belt tension automatically compensates for belt length differences Adjustable stops make it ideal for veneer sanding The grooved veneer stop allows for precise trimming of the veneer overhang TECHNICAL DATA Dimensions and Weight Length (product) approx. 1700mm Width/Depth (product) approx. 1000mm Height (product) approx. 1150mm Weight (net) approx. 300kg Extraction Connection Number of extraction ports: 2 Extraction port diameter: 100mm Work Table(s) Work table length: 950mm Work table width: 450mm Work table height adjustment: 110mm Electrical Data Supply voltage: 400V Mains frequency: 50Hz Power of oscillation motor: 0.11kW Sanding Unit Sanding belt length: 2640mm Sanding belt width: 150mm Belt speed: 14m/s Oscillation stroke: 15mm Sanding surface length: 800mm Sanding surface width: 150mm Swiveling range of sanding unit: 0 – 45° SCOPE OF DELIVERY 1x sanding belt K100 5x rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm Hnjdpjv Sk Nnefx Acueu 6x sanding sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm Service tools Mitre gauge

Sąlyga: naujas, Gamybos metai: 2025, Clean Air Dust Extractor: RLA 140 For Wood Dust and Shavings, Designed for Commercial Use Article Number: 5131400 Brand: Holzkraft DESCRIPTION Dust-tested to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic shavings High extraction performance with minimal space requirements Maximum performance in this class Very quiet operation All models equipped with bump protection Application Area Designed for commercial use For all woodworking machines with a matching extraction nozzle diameter High-quality, sophisticated construction Hodpsv Sk Tmsfx Acusnu Robust and compact housing made of galvanized steel sheet Extraction nozzle can be converted from left to right without difficulty, ensuring flexible use Large inspection openings Large-capacity, mobile chip containers with clamping bracket and chip collection bag Extractor is delivered fully pre-assembled, allowing for quick commissioning All models are mobile For model RLA 210: optimal chip distribution in the chip containers due to large filter surface Filter Description Ultra-compact with maximum filter area Filter material made of polyester fleece, aluminum-coated for long service life Filter standardly in antistatic design, tested and approved according to category M-BIA The fan is downstream of the filter TECHNICAL DATA Dimensions and Weights Length (product) approx. 1241 mm Width/depth (product) approx. 830 mm Height (product) approx. 1750 mm Weight (net) approx. 210 kg Chip collection volume: 165 l Connection diameter outside extraction nozzle inlet: 140 mm Extraction nozzle axis to floor: 850 mm Electrical Data Connection voltage: 400V Mains frequency: 50 Hz Extraction motor efficiency class: IE3 Drive motor power: 2.2 kW Filter Filter area: 8.5 m² Residual dust content: < 0.1 mg/m³ Filter cleaning: manual Noise Emission Max. sound pressure level: 71 dB(A) Airflow Nominal airflow: 1108 m³/h Max. airflow: 1750 m³/h SCOPE OF DELIVERY Metal impeller Inspection opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter Two fixed and two swivel castors with parking brake Manual cleaning

Sąlyga: naujas, Gamybos metai: 2025, Clean Air Dust Extractor RLA 160 Holzkraft For wood dust and chips, designed for commercial use Item number: 5131620 Brand: Holzkraft Chip Collection Volume: 2 x 165 l Outside Diameter of Extraction Port (Inlet): 160 mm Length approx.: 1,755 mm Width/Depth approx.: 830 mm Height approx.: 1,654 mm Weight approx.: 260 kg Electrical Data Connection Voltage: 400 V Mains Frequency: 50 Hz Filter Filter Area: 9.21 m² Noise Emission Max. Sound Pressure Level: 73 dB(A) Airflow Rated Airflow: 1,448 m³/h Dust Class: H3 Scope of Delivery: Metal Impeller Fan Inspection Opening for Cleaning the Bypass Filter 5 m Connection Cable with 5-pin CEE Plug and Phase Reverser Two Fixed and Two Swivel Castors with Locking Brakes Manual Filter Cleaning Item No. 5131620 Hnodpfx Acohkztteuou Location: ex stock 54634 Bitburg - Available immediately -