Holzkraft Kgz 3050 pirkti naudotą (213)

Sąlyga: naujas, - New - - Cutting level directly on the sliding table - Heavy-duty steel and cast iron construction - Precision-guided aluminum sliding table, standard anodized Pgsdpfxsvyupzo Afwew - Large support table extension mounted on a telescopic arm, longitudinally adjustable - Extendable aluminum telescopic fence, angle-adjustable with professional stop flaps - Parallel fence with quick release and fine adjustment - Large worktable made of machined cast iron remains perfectly flat over time - Standard table extension and table widening enable easy handling of larger workpieces - Smooth running and precise cuts - Equipped with a powerful three-phase motor - The large-dimensioned saw unit made of cast iron is doubly mounted to the cast table and guarantees stability, precision, smooth operation and long service life - Maximum cutting height is achieved even with scoring unit installed Made in Italy Equipment Details: Double trunnion saw unit - Large dimensions, made of steel/cast iron - Close to the saw blade, supported on both sides for precision, smoothness and durability - Height and tilt adjustable up to 45° via handwheel - Maximum cutting height also achievable with scoring unit installed - Also available with a scoring saw unit Telescopic Fence - Extendable telescopic fence up to max. 2550 mm - Angle-adjustable - With professional stop flaps Aluminum Sliding Table - Time-tested ball contact system, proven thousands of times - Resistant to dust and dirt, owing to minimal contact area between balls and trapezoidal rail - 10-year Holzkraft warranty against wear on the guideways Parallel Fence with Round Bar Guidance - With fine adjustment and quick locking - Stable round bar guidance made of precision-ground steel, 45 mm diameter - Standard fold-down mechanism for cutting large workpieces Technical Data: Dimensions and Weight Weight approx. 385 kg Dust Extraction Connector Extraction port diameter 120 mm Extraction port diameter saw blade guard 60 mm Electrical Data Drive motor power 5.0 kW Supply voltage 400 V Sliding Table and Table Sliding table length 2600 mm Sliding table width 270 mm Sliding table height 124 mm Table length 840 mm Table width 560 mm Table height 900 mm Saw Unit Cutting width with parallel fence 900 mm Max. crosscut width left of saw blade 2310 mm Edging length 2600 mm Saw blade tilt 90 - 45° Max. cutting height at 90° 90 mm Max. cutting height at 45° 63 mm (Main) saw blade diameter 315 mm (Main) saw blade speed 4000 rpm VPE 1 Scope of Delivery: Table extension and table widening Anodized aluminum sliding table Aluminum folding stops Parallel fence with round bar guidance and fine adjustment Art. No. 5504326

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: AB00021322, bendras plotis: 1 820 mm, bendras aukštis: 1 960 mm, bendras ilgis: 1 650 mm, darbinis plotis: 1 100 mm, bendras svoris: 1 160 kg, galia: 11 kW (14,96 AG), šlifavimo juostos ilgis: 1 900 mm, ruošinio aukštis (maks.): 170 mm, šlifavimo juostos plotis: 1 115 mm, įėjimo įtampa: 400 V, - The calibration and fine grinding machine LIBRA 35 is an extremely versatile and adaptable machine - Robust, tubular-reinforced monoblock steel frame with high-mounted working units for maximum rigidity - Operator-friendly thanks to a clearly arranged control panel on the front side - Motorized table height adjustment - Digital display for working height - Electronically controlled sanding belt oscillation with reduced compressed air consumption - Automatic star-delta start for main motor Pgjdowwkuyspfx Afwsw - Natural rubber feed belt with negative profile - Support table with two rollers at both the infeed and outfeed of the feed belt - Feed belt drive via gear motor with two speeds - Flexible steel pressure bar in front of the first unit - Rubber pressure rollers positioned before and after each working unit - Pneumatic belt tensioning system for each unit, with decimal adjustment for grit size/belt thickness

Sąlyga: naujas, Holzkraft HBS 513 S Bandsaw for Wood Precision band saw for professionals with high cutting performance. Heavy-duty design with high intrinsic weight for maximum smooth operation Exceptionally quiet and precise operation thanks to a torsion-resistant machine housing Precisely adjustable aluminum parallel fence Cast iron flywheels with rubber coating and chip removal brush Large grey cast iron saw table, tiltable from 0° to +45°, with ground and polished surface Precise cutting height adjustment via rack and pinion with millimeter scale Two extraction ports Automatic release of the saw band brake for blade adjustment. TECHNICAL DATA: Dimensions and Weights Length (product) approx. 1150mm Width/Depth (product) approx. 950mm Height (product) approx. 2000mm Net weight approx. 295kg Extraction Connection Extraction port diameter 2 x 120mm Work Table Work table length 640mm Work table width 500mm Work table height 920mm Work table extension length 150mm Work table extension width 500mm Work table tilt 0 – 45° Rated voltage 400V Mains frequency 50Hz Output power 3.5kW Cutting Capacity Pgjdpfxog Hzw Tj Afwew Max. cutting height at 90°: 350mm Max. cutting height at 45°: 200mm Max. cutting width with fence: 415mm Max. cutting width without fence: 500mm Saw blade speed 1320m/min Flywheel diameter 510mm Saw blade length 4100mm Saw blade width 25mm Max. saw blade width 38mm Saw blade thickness 0.6mm Saw blade guide: High-quality, fixed blade guide SCOPE OF DELIVERY: Mitre fence Saw blade Push stick Holzkraft authorized dealers – please send us your inquiry

Sąlyga: naujas, The work table made from heavily ribbed grey cast iron and the base frame made from welded steel ensure torsional rigidity and vibration-free operation. High-quality machine at a true entry-level price. Unique in this performance class: - Format sliding table made of anodized aluminium for highest cutting precision - Cutting plane directly at the saw blade - Saw blade unit tiltable from 90 to 45 ° - Table extension with aluminium crosscut fence and adjustable end stop for panels and large workpieces - Parallel fence with round bar guidance and fine adjustment - Powerful motor - Manufactured in Europe Dimensions and Weights Weight (net) approx. 170 kg Dust Extraction Connection Extraction port diameter 120 mm Extraction port diameter, saw blade guard 60 mm Transport width 680 mm Work area 1600 mm x 2300 mm Space requirement 2613.5 mm x 2134 mm Please add the specified dimensions to the space requirement to determine the recommended free installation area for the machine. The dimensions take into account maximum travelling distances or usable lengths. Psdpfxjvxr S Re Afwsgw Electrical Data Connection voltage 400 V Drive motor 1.8 kW Phase(s) 3 Ph Duty type drive motor S6 Current type AC Duty cycle drive motor 40% Mains frequency 50 Hz Sliding Table and Table Format sliding table 1140 mm x 200 mm x 70 mm Table 1024 mm x 224 mm x 900 mm Circular Saw Unit Cutting width with parallel fence 700 mm Max. cutting height 90° 67 mm Max. crosscut width left of saw blade 1200 mm Max. cutting height 45° 40 mm Edging length 1200 mm Saw blade diameter 250 mm Saw blade tilt 90 - 45° Saw blade speed 3900 min⁻¹ Scope of Delivery Table extension Anodized aluminium format sliding table Parallel fence with round bar guidance and fine adjustment Aluminium folding stop Eccentric clamp Item no. 5504113

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: AB00017920, bendras svoris: 510 kg, ašies skersmuo: 30 mm, frezos veleno ilgis: 180 mm, aukščio reguliavimo tipas: mechaninis, stalo ilgis: 2 500 mm, stalo plotis: 810 mm, sukimosi greitis (min.): 3 000 aps./min, sukimosi greitis (maks.): 10 000 aps./min, įėjimo įtampa: 400 V, spindelio eiga: 90 mm, pasukimo diapazonas: 45 °, darbinio aukščio: 923 mm, galia: 7 kW (9,52 AG), Įranga: variklio stabdis, - Robust steel/grey cast iron construction Pgedewwkqhspfx Afwjw - Dynamically balanced milling unit anchored to the work table - Especially sturdy design - Smooth operation thanks to precision assemblies and high dead weight - Standard with reversible spindle rotation (clockwise/counterclockwise) and electronic interlock during direction changes - Five speeds from 3,000 to 10,000 rpm - Speed change is simple and conveniently operated from the machine side - Standard with MK 4 quick-change spindle system - Large work table made of grey cast iron for lasting precision - Easy handling thanks to control elements and speed display on the machine front - Large dimensioned milling fence with fine adjustment and standard aluminium fence jaws - Fence adjustment via hand crank - Numerical display of set spindle height accurate to 0.1 mm - High-performance industrial motors

Sąlyga: naujas, - new - Description: - Vertical design for splitting short and meter-length logs - Sturdy and robust construction - Impact- and scratch-resistant thanks to high-quality powder coating - Quick, tool-free splitting height adjustment - Low base plate for easy and low-fatigue loading of large logs - Phase inverter on all 400 V models - Convenient transport with hand drawbar thanks to standard running gear with large pneumatic tyres and additional support wheel - Space-saving storage due to easily lowerable cylinder - Powerful industrial hydraulic system - Two-hand safety control - With split wood holder Pgsdjvxr Ryspfx Afwow Technical Data: Dimensions and Weights Length approx. 1050 mm Width/Depth approx. 1700 mm Height approx. 2500 mm Weight approx. 282 kg Drive PTO shaft speed 540 rpm Machine Data Max. splitting force: 23.4 t Min. log length: 560 mm Max. log length: 1100 mm Min. log diameter: 80 mm Max. log diameter: 350 mm Hydraulic System Hydraulic oil tank capacity: 24 l Item no. 5981023

Sąlyga: naujas, - new - Description: - Saw blade tilt and height adjustment is manual - Max. cutting height 200 mm - Scoring unit with separate drive motor - Main saw blade with belt drive and speeds 2800/3665/4800 rpm - High dead weight ensures vibration-free operation - Large outrigger table with material roller - Parallel fence with round bar guide - Extendable aluminium longitudinal fence with two flip stops - Powerful 7.5 kW main motor mounted on a robust cast iron frame - Four-point mounted sliding table with double roller carriage made of anodised aluminium offering high torsional rigidity - Multiple locking positions on sliding table Podsvxr Rgopfx Afwegw - As standard with steel sheet table extension and width extension - Large swing-away pendulum guard conveniently raised with gas-spring assist - Saw blade clamping via tool-free rapid system Technical data: Dimensions and weights Length approx. 3386 mm Height approx. 1330 mm Width/depth approx. 3703 mm Weight approx. 1102 kg Extraction connection Extraction port diameter 120 mm Extraction port diameter saw blade guard 80 mm Electrical data Connection voltage 400 V Input power 8.3 kW Motor speed 2800 rpm Mains frequency 50 Hz Output power 7.5 kW Sliding table and table Sliding table length 3200 mm Sliding table height 890 mm Table width 685 mm Sliding table width 416 mm Table length 1255 mm Table height 890 mm Noise emission Sound pressure level 96.5 dB(A) Circular saw unit Cutting width with parallel fence 1450 mm Saw blade tilt 90 – 45° Max. cutting height at 45° 140 mm Saw blade speed 2800/3665/4800 rpm Max. crosscut width to the left of saw blade 3200 mm Max. cutting height at 90° 200 mm Saw blade diameter 550 mm Scoring unit Scoring saw blade diameter 120 – 130 mm Scoring saw blade speed 8000 rpm Order No: 5200550

Sąlyga: naujas, - NEW - Brand: Holzkraft Model: FS 41 elite S Tersa Digital Digital version with motorized thicknessing table adjustment - The planer knife system allows for blade changes in seconds and ensures exceptionally quiet operation - Extra-long surfacing tables (2200 mm) made from a single piece for easy straightening of workpieces - Work tables are made of cast iron, annealed and stress-relieved for high durability and permanent flatness - Simultaneous table opening - Rearward, simultaneous opening of surfacing tables for short setup times - Powerful industrial motor - Fixed-mounted extraction hood - Robust steel/cast iron construction - Large surfacing fence (standard with auxiliary fence) - Material feed with two speeds via separate motor Technical data: Total table length: 2200 mm Pgodsvwgc Ujpfx Afwsw Working width: 410 mm Max. chip removal: 5 mm Thicknessing: Thicknessing table dimensions: 775x410 mm Min/max working height: 3/240 mm Feed speeds: 6/12 m/min Cutterblock diameter/knives: 95 mm / 4 pieces Speed: 5000 rpm Motor: 400 V / 50 Hz / S6 - 40% 5.0 kW (6.6 HP) Extraction port diameter: 1 x 120 mm Weight: 450 kg Item no.: 550 3441 Location: 97447 Gerolzhofen - free loaded -

Sąlyga: naujas, - new - with swiveling sanding unit and oscillating sanding belt, F version for veneer sanding Description: - Sanding unit swivels up to 45° via lever - The machine stand is made of welded steel, ensuring high torsional rigidity and vibration-free operation. - Oscillating sanding belt driven by a separate gear motor for improved sanding results - Oscillation can be switched on or off as required - Sanding shoe with graphite coating for increased belt service life - Height-adjustable sanding table to utilize the full sanding belt width - Height-adjustable auxiliary table with extraction for sanding radii - Spring-loaded belt tension automatically compensates for belt length differences - With double extraction ports - Extendable roller table extension - With rubber-coated sanding drum - Veneer edge sanding attachment with contact shoe, fine adjustment, support rollers, and stop rulers - With grooved infeed ruler for veneer overhang Pgsdpsvwgbwefx Afwew - Quick switching from veneer edge to solid wood sanding possible Technical Data: Dimensions and Weights Length approx. 1900 mm Width/Depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Extraction Connection Extraction port diameter 140 / 100 mm Drive Power Oscillation motor 0.25 kW Work Table(s) Work table length 960 mm Work table width 350 mm Work table height adjustment 230 mm Longitudinal table height adjustment 230 mm Cross table min. height 720 mm Electrical Data Connection voltage 400 V Mains frequency 50 Hz Sanding Unit Sanding belt length 3000 mm Sanding belt width 200 mm Belt speed 20 m/s Sanding area length 1050 mm Sanding area width 200 mm Oscillation stroke 20 mm Item no. 5363001

Sąlyga: naujas, NEW Precision Wood Bandsaws for the Ambitious Craftsman Particularly smooth and precise operation thanks to a torsion-resistant machine housing and a solid base made of steel sheet. Cast-iron saw table with precisely ground and polished surface. Convenient laser device for marking the cutting line. Quick-release blade tensioning via eccentric lever on the rear of the machine. Standard with two speeds. Precise 3-roller bandsaw blade guides, standard above and below from model HBS 351 onwards. Rapid cutting height adjustment via rotary knob and rack with millimeter scale. Smooth-operating aluminum rip fence with eccentric quick clamping and magnifier. Standard mitre gauge, adjustable ±60°. Safety switch for automatic shut-off when the door is opened. Equipment Details: Precision Guide HBS 351 with 3-roller blade guide above and below. With guide rollers. Easy to adjust. Practically maintenance-free. Quick-Release System Eccentric quick-release lever. The basic tension setting remains unchanged. With integrated blade tension indicator. Flywheels Flywheels with special coating (HBS 351). Basic tension adjustment is made using the rotary knob at the top. Saw Table The cast-iron saw table is mounted on a trunnion. The table tilt can be easily adjusted from -10° to +45°. Blade Tension Display Blade tension indicator for various blade widths, visible from the outside through a viewing window integrated in the door. Precision Guide From model HBS 431 with precision blade guide with guide rollers, fine adjustment above and below. Two speeds selectable via V-belt adjustment. Balanced cast-iron flywheels ensure smooth operation. Aluminum Rip Fence With eccentric quick clamping, particularly easy and precise to adjust. Easy-to-read millimeter scale and integrated magnifier. Saw Table Dual Trunnion Mounting The table tilt from -10° to +45° is adjusted via a precision and smooth rack and pinion guide with knob. For safety reasons, from 20° onwards, a holding device/stop must be fitted to prevent the wood from slipping! Technical Data: Dimensions and Weights Length (product) approx. 820 mm Height (product) approx. 1852 mm Width/Depth (product) approx. 730 mm Weight (net) approx. 130 kg Extraction Connection Extraction nozzle diameter: 2 x 120 mm Work Table(s) Table length: 610 mm Table tilt: -10 - 45° Table width: 431 mm Pjdpovwgbdjfx Afwegw Note on Table Tilt For safety reasons, from 20° onwards, a holding device/stop must be fitted to prevent the wood from slipping! Table height: 950 mm Electrical Data Supply voltage: 230 V Mains frequency: 50 Hz Phase(s): 1Ph Output power: 1.5 kW Current type: AC Cutting Capacity Max. cutting height at 90°: 270 mm Max. cutting width without fence: 410 mm Max. cutting width with fence: 370 mm Bandsaw Blade Blade speed(s): 900 / 450 m/min Blade guide: 3-roller precision guides above and below Blade length: 3345 mm Scope of Delivery Mitre gauge ±60° Laser device for marking the cutting line 1 x bandsaw blade wood 3345 x 6 x 0.65 mm

Sąlyga: naujas, - NEW - Description With TERSA cutterblock for changing planer blades in seconds TERSA planer knife system enables particularly quiet operation Helically geared steel infeed roller for constant and even wood feed Extra-long one-piece surfacing tables make planing of workpieces easy Large planing fence remains in position when opening the surfacing tables Surfacing tables open to the rear High machine weight ensures maximum precision and smooth running Powerful industrial motor Robust steel/cast iron construction. Working tables made of annealed and stress-relieved cast iron, making them insensitive and permanently flat Table lips for quiet operation Equipment Details: TERSA Planer Cutterblock No more setting and screwing Plane blade changes in seconds Self-locking Extremely quiet Perfect planing results Extraction Hose Connection The extraction ports for jointer and thicknesser face the same direction. Hose connection from only one side. No hose required to reach around the machine. Drive System Heavy-duty chain drive Drive wheels made of steel Solid cast iron bearing block Planing Unit Massive kickback protection prevents workpiece kickback TERSA cutterblock with three blades for optimal planing results Material Feed Helically geared steel infeed rollers ensure constant and even material feed without marking Several teeth engage simultaneously for powerful feed Wear-free compared to rubber infeed rollers Technical Data: Dimensions and Weights Length (Product) approx. 2015 mm Weight (Net) approx. 330 kg Width/Depth (Product) approx. 990 mm Drive Performance Motor power: 5 kW Jointer (Surfacing) Total length of tables: 1800 mm Max. cutting depth jointer: 4 mm Working height: 900 mm Extraction Connection Extraction port diameter thicknesser: 2 x 120 mm Installation Information Required length: 2015 mm Machine body width/depth: 596 mm Required width/depth: 1460 mm Working area length: 1000 mm Required Space Explanation Dimensions consider maximum travel distances or usable lengths. Working area width/depth: 3500 mm Machine body length: 659 mm Working Area Explanation Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Thicknesser Thickness table length: 605 mm Max. working height thicknesser: 230 mm Thickness table width: 420 mm Max. cutting depth thicknesser: 4 mm Min. working height thicknesser: 3 mm Electrical Data Rated voltage: 400 V Current type: AC Phases: 3 Ph Network frequency: 50 Hz Planer Cutterblock Planer shaft type: TERSA Planer shaft speed: 5200 rpm Planer shaft diameter: 72 mm Max. planing width: 410 mm Number of planer knives: 3 pcs Feed Feed speed: 7 m/min Psdpfx Afsvwga Hewegw Scope of Delivery TERSA cutterblock Anodised aluminium planing fence Art. No. 550 3414

Sąlyga: naujas, - NEW - Psdpfjvwgamsx Afwsgw Brand: Holzkraft Model: HBS 533 SET - Exceptionally smooth and precise operation thanks to a torsion-resistant machine housing and solid sheet steel base - Large-sized, one-piece grey cast iron saw table with precisely ground and polished surface - Convenient laser device for cutting line marking - Quick-release bandsaw blade tensioning via eccentric lever on the rear of the machine - Standard delivery includes two speeds - Precise 3-roller blade guides, top and bottom - Fast cutting height adjustment via handwheel and rack with millimeter scale - Smooth-running aluminum parallel fence with eccentric quick-clamping and magnifier - Standard mitre fence, adjustable to ±60° on both sides - Safety switch for automatic shutdown when the door is opened Technical data: Table dimensions: 680 x 530 mm Cutting speeds: 850 / 430 m/min Flywheel diameter: 530 mm Max. cutting height: 270 mm Max. cutting width with fence: 474 mm Max. cutting width without fence: 514 mm Blade length: 3865 mm Precision 3-roller guides top / bottom Table tilt: -10° to +45° Motor rating: 400 V / 50 Hz / P2 2.25 kW Weight: 163 kg Dimensions: 1024 x 793 x 2048 mm Extraction port diameter: 2 x 100 mm Scope of delivery includes: 1 set of saw blades, length 3865 mm, 3 pieces Order no.: 5155303SET Location: 97447 Gerolzhofen

Sąlyga: naujas, - NEW - - Equipped with TERSA cutterhead for lightning-fast planer knife changes - The TERSA planer knife system ensures particularly quiet operation - Helically serrated steel feed roller for consistent and uniform wood feed - Extra-long one-piece jointer tables facilitate effortless surfacing of workpieces - Large jointer fence remains in position when opening the tables - Jointer tables open to the rear - The heavy machine weight guarantees maximum precision and smooth operation - Powerful industrial motor - Robust steel/cast iron construction - Work tables made from annealed cast iron, stress-relieved for maximum durability and permanent flatness - Table lips for quiet operation Equipment Details TERSA Planer Cutterhead - No more knife adjustment or screwing - Planer knife change in seconds - Self-locking mechanism - Exceptionally quiet - Perfect planing results Extraction Hose Connection - Extraction ports for surfacing and thicknessing point in the same direction - Hose connection from only one side - No hose required to run around the machine Drive - Heavy-duty chain drive - Drive wheels made of steel - Solid cast iron bearing support Planing Unit - Heavy-duty anti-kickback fingers prevent workpiece kickback - TERSA cutterhead with three knives ensures an optimal planed finish Material Feed Pedpfx Asvwgaaofwogw - Helically serrated steel feed rollers for consistent and uniform material feed without impressions - Multiple teeth engage simultaneously for powerful feed - Maintenance-free compared to rubber feed rollers Technical Data: Length approx. 1,725 mm Width/depth approx. 880 mm Weight approx. 270 kg Maximum jointing depth: 4 mm Extraction port diameter thicknesser: 2 x 120 mm Minimum working height thicknesser: 3 mm Maximum working height thicknesser: 230 mm Maximum thicknessing depth: 4 mm Motor output: 4 kW Voltage: 400 V Frequency: 50 Hz Cutterhead type: TERSA Number of knives: 3 pcs. Speed: 5,200 rpm Maximum planing width: 300 mm Feed speed: 7 m/min Art. No. 5503031 Location: 97447 Gerolzhofen - free loaded -

Sąlyga: naujas, - NEW - Description - Sturdy steel and cast iron construction - Milling spindle tiltable from 0° to -45° towards the rear - Three spindle speeds from 3,500 to 10,000 rpm - Spindle with standard forward and reverse rotation - Large, heavy-duty milling unit made of cast iron, mounted directly to the table - Solid and precise cast iron table - Fast and easy speed change - Powerful 5.0 kW industrial motor - Standard curved milling protection hood included Equipment details Aluminium sliding carriage - Equipped with a highly proven ball contact system - Torsion-resistant, highly precise, smooth-running and reliable in daily use - 10-year Holzkraft warranty on wear of the guideways Cast iron milling unit - Directly attached to the milling table - Milling spindle runs on precision ball bearings mounted high up, ensuring minimal bearing load and maximum service life - 3 milling speeds from 3,500 to 10,000 rpm Powerful motors - Equipped with a high-performance three-phase motor Milling protection - For maximum safety, the milling guard is standard equipped with an adjustable height guide rail and a safety shield Milling fence - Precise milling fence with quick adjustment and fine adjustment with scale on the fence jaw - Integrated extraction connection ensures clear visibility Milling table opening - Large milling table opening also allows the use of large panel-raising cutters and tenoning/mortising tools above and below the table Curved milling protection hood - Included as standard Reversible fence jaws - Versatile integrated stop to bridge the tool gap - Enables safe operation even with narrow workpieces Technical data: Dimensions and weights Weight (Net) approx. 290 kg Dust extraction connection Extractor port diameter 2 x 120 mm Work table Work table length 1,000 mm Sliding carriage length 1,000 mm Work table width 435 mm Sliding carriage width 270 mm Table height 900 mm Installation information Required space length 1,945 mm Machine body width/depth 710 mm Required space width/depth 2,220 mm Work area length 1,600 mm Clarification required space Dimensions refer to maximum travel paths or usable lengths. Work area width/depth 1,600 mm Machine body length 1,000 mm Clarification working area Please add the stated dimensions to the required space to obtain the recommended free area for setting up the machine. Electrical data Connection voltage 400 V Network frequency 50 Hz Phase(s) 3 Ph Drive motor power 5.0 kW Current type AC Milling spindle Spindle tilt 0 to -45° Spindle speeds 3,500/7,000/10,000 rpm Usable spindle length 100 mm Spindle shaft diameter 30 mm Spindle projection max. above table 130 mm Psdpfxjvwf Uce Afwsgw Maximum milling tool diameters Max. lowerable tool diameter 180 mm Max. tenoning cutter diameter 275 mm Max. profile milling diameter 210 mm Scope of delivery Curved milling protection hood Anodized aluminium sliding carriage Telescopic mitre stop Aluminium fence jaws . 5502045

Sąlyga: naujas, - NEW - Manufacturer: Holzkraft Model: HBS 633 S SET Description: - Heavy-duty profile design with high dead weight for maximum running stability - Smooth and precise operation thanks to the torsion-resistant machine housing - Large, single-piece cast iron saw table, tiltable from 0° to +45°, with ground and polished surface - Large cast iron rip fence - Quick and precise cutting height adjustment via handwheel and rack, with millimeter scale - Supplied as standard with a mitre gauge - Precision 3-roller blade guide with top and bottom guide rollers, fine adjustment included - Eccentric quick-release lever; the basic tension setting is not changed, with integrated blade tension indicator - The saw table is mounted on a double rocker system, with simple and fast locking of the set tilt angle via quick-release function Pgodsvwf Tlepfx Afwjw - Eccentric quick-release lever - The basic tension setting remains unchanged - Equipped with integrated blade tension indicator - The solid cast-iron saw table is easily adjusted via a handwheel rack-and-pinion system - Table tilt is continuously adjustable from 0° to 45° - Easy and quick locking of the set tilt angle via quick-release function Technical Data: Work table dimensions: 830 x 600 mm Cutting speed: 1615 m/min Flywheel diameter: 630 mm Max. cutting height: 400 mm Max. cutting width with fence: 570 mm Max. cutting width without fence: 610 mm Bandsaw blade length: 4600 mm Precision guide top/bottom Table tilt: 0 to +45° Motor power: 400 V/50 Hz/P2 3.75 kW Weight: 380 kg Dimensions: 1190 x 750 x 2060 mm Extraction port diameter: 2 x 100 mm Stock no.: 5156303SET Location: 97447 Gerolzhofen - loaded free of charge -

Sąlyga: naujas, – New – Description: TERSA quick-change system for lightning-fast planer knife replacement Four-knife cutterblock for top-quality planing results Smooth operation thanks to precision unit and heavy cast-iron construction Long surfacing tables for precise planing Sturdy surfacing tables made from ribbed, milled, and stress-relieved cast iron—resistant to deformation and permanently flat Large, stable aluminum planer fence with round-bar guide (1200 x 150 mm), easy to adjust and tiltable up to 45° Supplied as standard with auxiliary fence Powerful 5.0 kW industrial motor Robust steel/cast-iron construction Optionally retrofittable mortising unit Pedpfxovwf Hre Afwegw Dimensions (Product Length) approx. 2250mm Dimensions (Product Width/Depth) approx. 1370mm Net Weight approx. 465kg

Sąlyga: naujas, - New - Description: - For sawing, milling, surface planing, thickness planing, and optionally mortising - Work tables made from heavily ribbed cast iron and the machine base made from welded steel ensure torsional rigidity and vibration-free operation - Unique in this performance class: smooth-running, anodised aluminium sliding table with ball contact system - Tiltable saw blade from 90° - 45° - Table extension with degree scale and aluminium crosscut fence for angle cuts on panels and large workpieces - Planer unit with TERSA quick-change system with three planer knives - Helically toothed steel infeed roller for consistent workpiece feed during thickness planing - Overhead milling safety guard for profiling, standard with fine adjustment - Milling unit with two speeds - Driven by three independent motors - Quality Made in Italy Technical Specifications: Dimensions and Weights Weight (net) approx. 245 kg Surface Planer Surface table width: 300 mm Surface table length: 1200 mm Angle adjustment saw/planer fence: 90/45° Max. planing depth: 3 mm Extraction Connector Extraction port diameter: 4 x 120 mm Extraction port diameter for saw blade guard: 60 mm Installation Information Required space length: 2460 mm Required space width/depth: 2155 mm Pgsdjvwf Enepfx Afwsw Note on required space: Dimensions account for maximum traverse paths or usable lengths. Thickness Planer Thickness table length: 450 mm Thickness table width: 300 mm Min. working height: 3 mm Max. working height: 200 mm Max. thicknessing depth: 3 mm Electrical Data Connection voltage: 400 V Network frequency: 50 Hz Duty rating drive motor: S6 Duty cycle drive motor: 40 % Drive motor power: 3 x 1.8 kW Sliding Table and Table Sliding table length: 1140 mm Sliding table width: 201 mm Sliding table height: 70 mm Table length: 1024 mm Table width: 224 mm Table height: 900 mm Spindle Moulder Spindle tilt: 0° Spindle shaft diameter: 30 mm Usable spindle length: 75 mm Spindle speeds: 5,000 – 7,500 rpm Max. Cutter Diameter Max. tool diameter: 160 mm Max. retractable tool diameter: 180 mm Max. tenoning cutter diameter: 275 mm Planer Cutter Block Planer cutter block type: TERSA Planer cutter block diameter: 62 mm Number of knives: 3 pcs Circular Saw Unit Ripping length: 1200 mm Cutting width with parallel fence: 540 mm Max. cross-cut width left of saw blade: 1200 mm Saw blade tilt: 90 - 45° Max. cutting height at 90°: 67 mm Max. cutting height at 45°: 40 mm Max. saw blade projection 90°: 75 mm Max. saw blade projection 45°: 60 mm Feed Feed speed: 6 m/min Scope of Delivery: - Tersa quick-change planer cutter block - Anodised aluminium sliding table - Multifunctional fence for rip and surface planing operations - Table extension with crosscut fence and fence jaw - Eccentric clamp arm Article no.: 5500030

Sąlyga: naujas, - New - Description: - Vertical design for splitting short and meter-length logs - Robust and solid construction - Impact- and scratch-resistant due to high-quality powder coating - Quick, tool-free splitting height adjustment - Low base plate for easy, fatigue-free loading of large logs - Phase inverter on all 400 V models - Convenient transport using the hand drawbar with a standard running gear featuring large pneumatic tyres and an additional support wheel - Space-saving storage thanks to easily lowerable cylinder - Powerful industrial hydraulic system - Two-hand safety operation - With log holder Technical specifications: Dimensions and Weights Length approx. 1050 mm Width/Depth approx. 1700 mm Height approx. 2500 mm Weight approx. 373.1 kg Drive PTO speed 540 rpm Power requirement 5.5 kW Electrical Data Connection voltage 400 V Psdpfxevwfzis Afwsgw Mains frequency 50 Hz Machine Data Max. splitting force 26.1 t Min. splitting length 560 mm Max. splitting length 1100 mm Min. log diameter 80 mm Max. log diameter 400 mm Hydraulic system Hydraulic oil tank capacity 30 l Item no. 5981031

Sąlyga: naujas, Technical Data: Dimensions and Weights Working height: 850 – 1150 mm Log cradle height: 735 mm Length approx.: 1270 mm Width/Depth approx.: 730 mm Height approx.: 1130 mm Weight approx.: 121.5 kg Drive Drive type: Electric motor with direct drive Electrical Data Power consumption: 7.5 kW Connection voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Psdpovwfxhjfx Afwsgw Saw Blade Diameter: 700 mm Cutting Capacity Cradle round timber: 240 mm Cradle crosscut: 250 mm Cradle split wood: 370 x 240 mm

Sąlyga: naujas, Gamybos metai: 2023, Clearance Sale Year of manufacture: 2023 Description: - Grinding unit tiltable via hand crank - The machine frame, made of welded steel, ensures high torsional rigidity and vibration-free operation Pgodpfx Asvwfxbofwew - Oscillating sanding belt with separate geared motor for improved sanding results - Oscillation can be switched on as required - Graphite-coated sanding shoe for increased belt service life - Height-adjustable sanding table for utilizing the entire belt width - Auxiliary table with extraction ports for sanding radii on the rubber-coated contact roller - Sanding sleeve device with attachable work table - Spring-loaded belt tension compensates for belt length differences automatically - Adjustable stops make it ideal for veneer sanding - Grooved veneer stop allows flush trimming of veneer overhang TECHNICAL DATA Dimensions and Weights Length (product): approx. 1700 mm Width/Depth (product): approx. 1000 mm Height (product): approx. 1150 mm Weight (net): approx. 300 kg Drive Power Oscillation motor output: 0.11 kW Extraction Connection Extraction port diameter: 2 x 100 mm Work Table(s) Work table length: 950 mm Work table width: 450 mm Work table height adjustment: 110 mm Electrical Data Supply voltage: 400 V Mains frequency: 50 Hz Sanding Unit Abrasive belt length: 2640 mm Abrasive belt width: 150 mm Belt speed(s): 14 m/s Oscillation stroke: 15 mm Sanding area length: 800 mm Sanding area width: 150 mm Grinding unit tilt: 0 – 45° SCOPE OF DELIVERY 1x Sanding belt K100 5x Rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm 6x Sanding sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm Service tools Mitre fence

Sąlyga: naujas, Description Work table made of heavily ribbed cast iron and base frame constructed from welded steel ensure torsional rigidity and vibration-free operation. Unique in this performance class: sliding table made from anodized aluminum for maximum cutting precision. Cutting plane directly at the saw blade. Tilting saw blade from 90° to 45°. Crosscut fence with aluminum length stop and adjustable stop jaw for panels and large workpieces. Cutter guard for profiling tasks. Two independent motors for each working unit. TECHNICAL DATA Dimensions and Weights Net weight approx. 190 kg Extraction Connection Extraction port diameter 120 mm Extraction port diameter saw blade guard 60 mm Electrical Data Podpfjvwfqwox Afwsgw Connection voltage 400 V Mains frequency 50 Hz Rated operating mode of drive motor S6 Duty cycle drive motor 40 % Power of drive motor 2 x 1.8 kW Sliding Table and Work Table Sliding table length 1,140 mm Sliding table width 201 mm Sliding table height 70 mm Table length 1,040 mm Table width 224 mm Spindle Moulder Spindle shaft diameter 30 mm Usable spindle length 75 mm Spindle speeds 5,000 / 7,500 rpm Max. Cutter Diameter Max. tool diameter 160 mm Max. tool diameter tenoning 200 mm Circular Saw Unit Crosscut length 1,200 mm Cutting width with rip fence 700 mm Max. crosscut width left of the saw blade 1,200 mm Saw blade tilt 90 – 45° Max. cutting height 90°: 75 mm Max. cutting height 45°: 60 mm Max. saw blade projection 90°: 67 mm Max. saw blade projection 45°: 40 mm (Main) saw blade diameter 250 mm (Main) saw blade speed 4,000 rpm Equipment Anodized aluminum sliding table Squaring frame with angle-adjustable length stop, one folding stop, and degree scale Saw rip fence Eccentric clamp Table extension Spindle moulder fence with wooden pressure jaws Manual spindle height adjustment Manual saw blade height adjustment Manual saw blade tilt adjustment

Sąlyga: naujas, - New - Pgodpfxsvwfmls Afwsw Description: - Premium equipment for high productivity in a compact footprint! - Intuitive operation with the eye-S control system and large 10" touchscreen: HMI Maestro Active Edge. Graphical display of all machining units and their operating status, graphic simulation of processes, control of all machining units, temperature regulation of the glue pot, assistant functions for setting up the machine according to the machining program, error diagnosis for quick resolution of basic faults, statistics of machining parameters, USB port, prepared for network connection, prepared for Industry 4.0 with API REST data transfer protocol. - Excellent accessibility to the working units thanks to the large hood, which ensures protection and noise reduction - Monoblock steel construction guarantees high stability and rigidity - Automatic positioning of units when changing panel thickness - Automatic feeding of strip edging with edge magazine (me 35 t s): Solid wood strips are automatically loaded and synchronized with the panel feed - Panel feed by chain conveyor with rubber sliding shoes - Extendable workpiece support - Adjustment of the infeed fence via spacer plates Technical Data: Dimensions and Weights Length: approx. 3,314 mm Height: approx. 1,300 mm Width/Depth: approx. 1,085 mm Weight: approx. 545 kg Flush Radius Milling Unit Flush radius milling unit motor power: 2 x 0.35 kW Flush radius milling unit spindle speed: 12,000 rpm Flush radius milling unit cutter diameter (carbide tipped): 55.3 mm Dust extraction port diameter: 2 x 60 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Glue Unit Glue pot power: 0.25 kW Glue pot dust extraction port: 60 mm Glue pot operating temperature: 190 °C Glue pot capacity: 0.8 kg Pneumatic Connection Operating pressure: 6.5 bar Air consumption: 470 l/min Feed Feed motor power: 0.55 kW Feed speed: 7 m/min Edging Edging thickness, roll material: 0.4 – 3.0 mm Edging thickness, strip material: 0.5 – 5.0 mm Pre-milling Unit Pre-milling unit motor power: 3 kW Pre-milling unit diamond cutter diameter: 80 mm Pre-milling unit material removal: 0.5 / 1 / 1.5 / 2 mm Pre-milling unit cutter speed: 7,200 rpm Pre-milling unit cutter height: 56 mm Pre-milling unit dust extraction port diameter: 2 x 80 mm Scraper Units Radius scraper: 2 mm Buffing Unit Buffing unit motor power: 2 x 0.14 kW Buffing unit speed: 2,800 rpm Workpiece Workpiece thickness: 8 – 50 mm Minimum workpiece width: 110 mm Minimum workpiece length: 120 mm Item no. 5507235

Sąlyga: naujas, - NEW - Description: - Robust welded steel construction - Workpiece is automatically clamped during each cut by the saw blade cover - The saw blade is raised by a pneumatic cylinder and retracts into the machine body after each cut - Saw blade feed continuously adjustable via set screw on the machine front - Effective chip and reach-in protection made of plexiglass - High operator safety thanks to two-hand control - Supplied as standard with 1m roller conveyor on both left and right sides of the machine, as well as a material stop with scale - Saw blade replacement via large side door Technical Data: General Information Saw blade speed: 3000 rpm Saw blade diameter: 500 mm Saw blade bore: 30 mm Saw blade thickness: 4 mm Miter cut: no Extraction port diameter: 125 mm Sound pressure level: 89 dB(A) Dimensions and Weight Length (product): approx. 3000 mm Width/depth (product): approx. 1600 mm Height (product): approx. 1500 mm Weight (net): approx. 700 kg Electrical Data Pjdpfxovwfluo Afwogw Drive motor power: 6 kW Motor speed: 2900 rpm Total power consumption: 15.5 A Connection voltage: 400 V Mains frequency: 50 – 60 Hz Standards and Approvals EMC class: A Pneumatic Connection Air consumption: approx. 33 l/min Operating air pressure: 6 – 8 bar Cutting Range Cutting capacity 0° (square), solid material: 160 x 160 mm Cutting capacity 0° (rectangular), solid material: 400 x 100 mm Scope of delivery: - 1 m infeed roller conveyor, right of the machine - 1 m outfeed roller conveyor including manual material stop with scale, left of the machine Item no.: 5651500

Sąlyga: naujas, Gamybos metai: 2022, Clearance Sale Year of Manufacture: 2022 Description: - Grinding unit can be swiveled via handwheel - Machine frame made of welded steel ensures high torsional rigidity and vibration-free operation - Oscillating sanding belt with separate geared motor for improved sanding results - Optional oscillation can be switched on or off - Sanding pad with graphite coating for increased belt service life - Height-adjustable sanding table to utilize the full sanding belt width - Auxiliary table with extraction ports for sanding radii on the rubber-coated contact roller - Sleeve sanding device with attachable work table - Spring-loaded belt tension compensates for belt length differences automatically TECHNICAL DATA Dimensions and Weights Length (product): approx. 1700 mm Width/Depth (product): approx. 1000 mm Height (product): approx. 1150 mm Weight (net): approx. 250 kg Drive Power Oscillation motor power: 0.11 kW Extraction Connection Extraction nozzle diameter: 2 x 100 mm Psdpfxevwfkqs Afwjgw Work Table(s) Work table length: 900 mm Work table width: 360 mm Work table height adjustment: 110 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Grinding Unit Sanding belt length: 2580 mm Sanding belt width: 150 mm Belt speed: 14 m/s Oscillation stroke: 15 mm Sanding surface length: 800 mm Sanding surface width: 150 mm Max. sanding height: 150 mm Swiveling angle of grinding unit: 0 – 90° SCOPE OF DELIVERY 1x K100 sanding belt 5x rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm 6x sanding sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm Service tools Mitre gauge

Sąlyga: naujas, Gamybos metai: 2022, Clearance Sale Year of Manufacture: 2022 Description: - Separate working tables for sanding solid wood and veneer, each manually tiltable by 45° and 35° respectively - Veneer sanding stop can be set with 0.1 mm precision - Motorized height-adjustable sanding unit Pgedpfevwfa Sjx Afwjw - Additional table with extraction ports for sanding radii on the rubberized idler roller - Drum sanding unit with attachable work table - Welded steel machine base ensures high torsional rigidity and vibration-free operation - Oscillating sanding belt driven by a separate gear motor for improved sanding results - Oscillation can be engaged or disengaged as needed - Abrasion-resistant, high-glide plastic overlays on the work table surface - Graphite-coated sanding shoe for longer sanding belt life - Spring-loaded belt tension automatically compensates for length variations - Rubber-coated and grooved sanding roller - Convenient operation from both sides via a rotating control panel above the machine - Centrally positioned mount for feed unit Technical Data: Dimensions and Weights: Length (product): approx. 1820 mm Width/Depth (product): approx. 1050 mm Height (product): approx. 1470 mm Net Weight: approx. 400 kg Drive Performance: Oscillation motor power: 0.38 kW Extraction Connection: Extraction port diameter: 150 mm Work Table(s): Work table length: 1000 mm Work table width: 280 mm Table tilt: 45° / 35° Electrical Data: Supply voltage: 400 V Mains frequency: 50 Hz Sanding Unit: Sanding belt length: 2640 mm Sanding belt width: 150 mm Belt speed: 14 m/s Oscillation stroke: 20 mm Sanding area length: 890 mm Sanding area width: 150 mm Max. sanding height: 150 mm Scope of Delivery: 1x Edge Sanding Machine KSO 150 M F 3 PRO 1x Sanding belt K100 5x rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm 6x sanding sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm Tool kit Mitre guide