Gerb Linginiai Elementai pirkti naudotą (1 641)

Gamybos metai: 2017, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 4066, The cost-effective drainage solution for condensate from your compressor. The oil is separated from the water using a filter set. Dodpfx Aeqmmvcsf Aekl The filter set is included in the scope of delivery. The treated water (only when using the filter set) meets the requirements for discharge into the sewer system. Warranty and liability are excluded in this listing. Price on request.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2024, mašinos/transporto priemonės numeris: 11182, bendras svoris: 1 200 kg, 1 almost new test bench for fuel cell stacks Performance characterization and endurance (aging) tests in SOFC/SOEC operation 4-station cell test bench, type FCTR-C-..... Stack holder not included in delivery! Year of manufacture: 2024. Pre-commissioning at the supplier, final acceptance at the plant, including all relevant safety inspections. Endurance runs and product tests performed. Not used for production. Fully operational. More information can be found in the two attached data sheets. Please provide your offer price. Sale only within Europe (EU), including Turkey, Great Britain, and Switzerland. Technical specifications: See handout. Without packaging; Any warranty rights are excluded. If you wish to dismantle the system yourself, please inform us accordingly in your offer. Dkjdpfx Aow E Iw Ief Aol We do not assume any liability for the accuracy of the technical data, for the completeness of accessories and tooling, or for compliance with all safety and environmental protection requirements as stated in the accident prevention regulations.

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 11192, Please provide us with your offer price. Sale only within Europe (EU), including Turkey, United Kingdom, Switzerland. Dkodpfx Aow E I U Tjf Ajl ----- Technical specifications as per handout. Without packaging; any warranty rights are excluded. Should you wish to dismantle the unit yourself, please indicate this in your offer. We do not assume any liability for the correctness of the technical data, the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements as stipulated in accident prevention regulations.

Būklė: naudotas, Multiple oscillating mortiser by Camam, model AF12, equipped with 2 horizontal spindles and 4 vertical spindles on each side, fixed worktables, high-frequency (HF) motors. Dkodpfouziybox Af Aol

Būklė: naudotas, 4-group tilting drilling machine Dedpfxsq Tiq Ns Af Askl

Būklė: naudotas, Sander for electronic components, brand Promac, complete with soundproof cabin, used. This machine is ideal for sanding with coarse grit from 6 to 50 (planing) elements on 4 sides (see technical specifications in the photos). Dkjdpsrla Sxjfx Af Ael

Būklė: visiškai atnaujintas (naudotas), Camam ZS Vienvietis zigzagavimo įrenginys tiesiems ir apvaliems elementams Dkjdex Dbnhjpfx Af Ael

Gamybos metai: 2022, būklė: naujas, Daugiaašmenė pjovimo staklės tiksliam smulkių detalių pjovimui, skirtos bičių rėmelių gamybai. - Galia: 11 kW - Veleno skersmuo: 70 mm - Diskų skaičius: 10 - Diskų skersmuo: 210 mm - Minimalus ruošinio ilgis: 100 mm - Maksimalus aukštis: 40 mm - Pjovimo padavimo greitis: 4–8 m/min Djdpfx Afeh Hxycj Askl - Greito keitimo diskų laikiklis

Būklė: naudotas, Gamybos metai: 2007, Gamintojas: - Metai: 2007 Tipas: Lydytuvas su kaitinimo elementais – panardinami kaitintuvai Tūris: 35 l Dkjdpjx R Dlxofx Af Aol Inkarinio tipo maišytuvas su tefloniniais gremžtukais Talpyklos dangtis Kintamo greičio pavara: mechaninė ir rankinė Dvigubos sienelės: Taip Panardinami kaitintuvai: 2 vnt. Dirbtuvinis bandymo temperatūra: 80°C Apsauginių sienelių recirkuliacinis siurblys Elektrinė spinta Vaizdo įrašas prieinamas veikimo būsenoje

Būklė: beveik kaip naujas (naudotas), Filter elements (spare parts) for Kieselguhr filter SEITZ - ORION L: 1. Stainless steel plates and frames 40/40. Mounted together on castors. 2. Stainless steel plates 60/60. 9 pieces Dkodpfoq H Smaox Af Aol 3. Gaskets, 14 pieces 4. Gaskets, 16 pieces 5. Gaskets, 26 pieces

Būklė: naudotas, Gamybos metai: 2020, Orangeworks Edelstahl Mischbehälter 2 Stück auf Lager Fassungsvermögen: 500 Liter Wägezellen Rührwerk Zusätzliche Ausrüstung inklusive Dodpjwq Sz Ujfx Af Askl

Būklė: naudotas, Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 636, įvesties srovės tipas: trifazis, bendras plotis: 1 800 mm, įėjimo įtampa: 400 V, įėjimo srovė: 10 A, kėlimo aukštis: 2 000 mm, keliamoji galia: 250 kg, 31 C – Gerber Automatic Fabric Loading System (250 LU) – Industrial Spreading Line Unit Description Dkedpjy Av H Sjfx Af Asl For sale is a Gerber automatic fabric loading system (model 250 LU), designed for integration into industrial spreading and cutting lines. This unit enables efficient, safe, and controlled handling of heavy fabric rolls, significantly reducing manual labor in high-volume production environments. The installation was operated as part of a fully integrated production line together with a GERBER SY 101 spreading system (unit 21 C) and a Lectra Vector VT-FA-MH-71 CNC cutting system (unit 29 C). This configuration enables a seamless workflow from roll handling to spreading to cutting, maximizing production output with minimal downtime. The machine was used in a professional garment manufacturing facility and was functional until factory closure. Last serviced on 27.02.2026. Scope of delivery • Gerber automatic fabric loading system • Motorized lifting and roll feed system • Adjustable frame construction • Integrated operating controls and switches • Heavy-duty steel frame with rollers Technical details • Manufacturer: Gerber Technology • Model: LS-250-LU • Year of manufacture: 2004 • Serial number: 636 • Type: Automatic fabric roll loading system • Load capacity: up to 250 kg • Net weight: approx. 300 kg • Voltage: 3 × 380 V • Frequency: 50 Hz • Current draw: approx. 10 A Functionality • Automatic lifting and positioning of fabric rolls • Precise alignment for transfer to spreading machines • Consistent and controlled material feed • Mobile design for flexible use in production areas Production benefits • Reduces manual lifting of heavy rolls • Improves workplace safety and ergonomics • Minimizes downtime during roll changes • Supports continuous production processes • Ensures precise material feeding Integration • Optimized for Gerber spreading systems (e.g. SY 101) • Compatible with automated cutting lines (e.g. Lectra Vector) • Suitable for fully integrated production environments Condition Used industrial condition Serviced on 27.02.2026 Fully functional prior to decommissioning Normal signs of use present Inspection recommended Sold as seen ("as-is, where-is"), without warranty Applications • Spreading systems • Textile production • Automated cutting rooms • High-throughput garment industry Location Valga, Estonia Dismantling and transport To be organized by the buyer Professional handling recommended due to size and weight

Būklė: naudotas, Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, bendras plotis: 1 800 mm, bendras ilgis: 16 500 mm, įėjimo įtampa: 400 V, įėjimo srovė: 10 A, 21 C – GERBER Spreader SY 101 Fabric Spreading Machine – Complete Cutting Line Description For sale is a GERBER Spreader SY 101 industrial fabric spreading system, including the spreading machine and complete table setup. This system is designed for efficient and precise spreading of fabric layers on long cutting tables in apparel manufacturing. It ensures consistent material feeding, accurate layer control, and significantly increases productivity in the cutting room. Djdpfxoy Avqdo Af Aekl The setup was operated as part of a complete production line together with a Gerber automatic fabric loader (unit 31 C) and a Lectra VT-FA-MH-71 CNC cutting system (unit 29 C). This configuration enables a seamless workflow from roll handling, spreading, to cutting, greatly reducing manual labor while achieving higher throughput. The machine was in operation until the factory closure, serviced on 27.02.2026, and is documented in an operational video dated 05.03.2026. Scope of delivery • GERBER Spreader SY 101 • Rail-guided motorized drive system • Integrated control panel • Long spreading tables (approx. 16.5 m) • Fabric roll holder • Conveyor belt or air floating (air cushion) table system • Interfaces for integration with loader and cutting systems Technical data • Manufacturer: Gerber Technology • Model: SY 101 • Type: Fabric spreading machine • Application: Cutting room / spreading line Capacity • Max. roll width: approx. 1800 mm • Max. roll weight: approx. 100 kg • Max. roll diameter: approx. 500 mm • Max. lay height: approx. 230 mm Performance • Spreading speed: up to 100 m/min • Length accuracy: ±2 mm Connections • Voltage: 230 V / 400 V, 50/60 Hz • Power: approx. 2.5 kW • Compressed air: approx. 6 bar System features • Air cushion table for low-friction movement of heavy fabric layers • Tension-free material feed • Precise length measurement to minimize material waste • Compatible with automatic loaders and CNC cutting systems Advantages • High precision reduces material waste • Continuous production flow • Reduced manual labor • Suitable for denim, workwear, and technical textiles • Modular system for flexible layouts Condition Used industrial condition Operational prior to decommissioning Normal signs of use present Inspection prior to dismantling possible Sold as seen (“as-is, where-is”), without warranty Location: Valga, Estonia Dismantling and transport To be organized by the buyer Professional dismantling recommended

Būklė: naudotas, Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 20082, įvesties srovės tipas: trifazis, bendras plotis: 2 000 mm, bendras ilgis: 6 700 mm, įėjimo įtampa: 400 V, įėjimo srovė: 10 A, 32 C – GERBER XLS-125-180-L Automatic Spreader – Industrial Spreading System Description For sale is a GERBER XLS-125-180-L automatic fabric spreader, designed for high-volume textile and garment production. This industrial spreading system enables precise and efficient multi-layer spreading of fabrics directly onto a conveyor table. The motorized spreading carriage ensures consistent material feed, accurate alignment, and a constant production speed, making the system ideal for demanding production environments. The machine is considered a proven workhorse in the industry and can process a wide range of materials, from heavy denim to lightweight fabrics. The system was operated as part of a fully integrated cutting line together with a Lectra Vectorfashion VT-FA-Q2-72 cutter (unit 35 C) and a FINN-CONVEY V307 conveyor system (unit 30 C). This combination significantly enhances production flow, reduces manual labor, and enables continuous high-performance operation. The unit was in use in a professional apparel manufacturing facility and was fully functional until the plant closure. Last serviced on 27.02.2026. Operating video available (05.03.2026). Scope of Delivery • GERBER XLS automatic fabric spreader • Motorized spreading carriage • Roll holding system • Integrated touchscreen control panel • Fabric alignment and infeed system • Mounted rail system for table use Technical Data • Manufacturer: Gerber Technology • Model: XLS-125-180-L • Year of manufacture: 2009 • Serial number: 20082 • Max. roll weight: 125 kg • Max. roll diameter: approx. 600–650 mm • Machine weight: approx. 400 kg • Spreading width: up to 1800 mm • Speed: up to approx. 100 m/min (material dependent) • Voltage: 3 x 380–415 V • Frequency: 50/60 Hz • Current draw: approx. 10 A Key Features • Fully automatic spreading to reduce manual labor • Suitable for roll and folded goods • Precise tension control to prevent material distortion • Accurate edge alignment for material optimization • Touchscreen operation for easy programming • Integrated safety systems including emergency stop and sensors Production Advantages • High precision reduces material waste • Fast spreading increases cutting room efficiency • Even tension ensures dimensionally stable cuts • Optimal preparation for multi-layer cutting Maintenance & Reliability Dksdpfey Alcijx Af Asl Gerber spreading systems are renowned for good parts availability and long service life. Condition Used, production-ready condition Fully functional prior to decommissioning Last serviced on 27.02.2026 Operating video available (05.03.2026) Normal signs of use from production Inspection prior to dismantling possible Sale as inspected (“as-is, where-is”), without warranty Typical Applications • Automatic fabric spreading • Preparation for multi-layer cutting • Denim and heavy fabric processing • High-volume garment manufacturing • Cutting room applications Location Valga, Estonia Dismantling and Transport To be organized by the buyer Professional dismantling is recommended due to the size of the system

Būklė: naujas, 5x5m Mezzanine Platform, Load Capacity: 500kg/sqm, Underside Height: 2.5m, Approx. 25sqm System Platform Specifications: - Length: approx. 5m - Width: approx. 5m - Underside of platform: approx. 2.5m - Top edge of platform: approx. 2.88m - Total area: approx. 25sqm - Load capacity: 500 kg/sqm - Deck: 38mm chipboard P6, natural finish on top, white underneath - Post grid: 5.0m x 5.0m Dodpfx Aey Izn Sef Ajkl - NO CROSS BRACES, bracing via knee brace - New, ex works, plus freight (cost depending on postal code) Scope of delivery: - 02 x C-profile 5000mm, sendzimir galvanized - 08 x S-profile 4800mm, sendzimir galvanized - 04 x column 2500mm, RAL 7016 - 03 x knee brace 2517mm, RAL 7016 - 12 x chipboard panels 2400 x 1000 x 38mm, natural/white P6 - 04 x base plates for columns - 04 x anchor bolt set for columns OUR DESIGN DEPARTMENT WILL GLADLY PROVIDE YOU WITH A NON-BINDING, CUSTOMIZED QUOTE ACCORDING TO YOUR REQUIREMENTS. Price: €4,988 net plus statutory VAT. You will receive an invoice with VAT shown separately. Optional, on request: - Impact protection - Guard rail - Transfer station - Stairs - Floor anchors - Steel structure can be coated in your desired RAL color (standard RAL 7016) Transport: Delivery can be arranged through our partner freight forwarder upon request. Shipping costs depend on postal code. Installation: Our trained staff is available to assist you with the professional assembly and disassembly of your company equipment. Our recommendation: Let us know your requirements... We are happy to assist you with your projects, from planning and ordering through to installation.

Būklė: naujas, 10x10m Storage Mezzanine, Load Capacity: 500kg/sqm, Underside: 2.5m, Approx. 100 sqm Modular Platform Specifications: - Length: approx. 10m - Width: approx. 10m - Underside of platform: approx. 2.5m - Top edge of platform: approx. 2.88m - Total area: approx. 100 sqm - Load capacity: 500 kg/sqm - Decking: 38 mm chipboard P6, top natural, bottom white - Support grid: 5.0m x 5.0m - NO cross bracing, stabilization via tie beam - Brand new ex-works, plus freight cost depending on postal code Scope of delivery: - 08 x C profile 5000 mm, Sendzimir galvanized - 28 x S profile 4800 mm, Sendzimir galvanized - 09 x support columns 2500 mm, RAL 7016 - 03 x tie beams 2517 mm, RAL 7016 - 47 x chipboards 2400 x 1000 x 38 mm natural/white P6 - 09 x footing plates for columns - 09 x anchor sets for columns Djdpjy Iznrjfx Af Aekl OUR DESIGN DEPARTMENT WILL GLADLY PROVIDE YOU WITH A NON-BINDING QUOTE TAILORED TO YOUR REQUIREMENTS. Price: €12,904 net plus applicable statutory VAT You will receive an invoice showing VAT separately. Options available on request: - Impact protection - Handrails - Transfer station - Stairs - Floor anchors - Steel structure can be powder coated in the RAL color of your choice (Standard: RAL7016) Transport: Delivery can be arranged via our partner freight forwarder upon request. Costs depend on the destination postal code. Installation: Our trained personnel are available for professional assembly and disassembly of your facility if required. Our recommendation: Share your requirements with us… We are happy to assist you with your projects, from planning and ordering to installation.

Būklė: naujas, 5x5m Mezzanine Platform, Load Capacity: 500kg/sqm, Underside Height: 3m, Approx. 25sqm, Modular Platform System Specifications: - Length: approx. 5m - Width: approx. 5m - Underside platform height: approx. 3.00 m - Top edge platform height: approx. 3.38 m - Total area: approx. 25 sqm - Load capacity: 500 kg/sqm - Decking: 38 mm chipboard P6, natural finish on top, white underneath - Support grid: 5.0m x 5.0m - NO CROSS BRACING, stabilisation via tie rods - Brand new ex works, freight cost depends on postal code Scope of delivery: - 02 x C profile 5000 mm, sendzimir galvanized - 08 x S profile 4800 mm, sendzimir galvanized - 04 x Support posts 3000 mm, RAL 7016 - 04 x Tie rods 3049 mm, RAL 7016 - 12 x Chipboard 2400 x 1000 x 38 mm, natural/white P6 - 04 x Foot plates for support posts - 04 x Anchor bolt sets for support posts OUR DESIGN DEPARTMENT WILL BE HAPPY TO PROVIDE YOU WITH A NON-BINDING, TAILORED QUOTE UPON REQUEST. Dodoy Iznfepfx Af Aekl Price: €5,288 net plus legally applicable VAT You will receive an invoice with VAT statement. Available as options upon request: - Impact protection - Handrail - Transfer station - Stairs - Floor anchors - Steel construction can be coated in your preferred RAL colour (standard is RAL 7016) Transport: Delivery can be arranged through our partner freight forwarder on request; shipping costs depend on the destination postcode. Installation: Our experienced staff are available to professionally assemble and disassemble your facility as required. Our recommendation: Let us know your requirements… We are happy to support you with your projects, from planning and ordering through to assembly.

Būklė: naujas, 10x15m mezzanine platform, load capacity: 500kg/m². Underside clearance: 2.5m, approx. 150m² modular platform system. Specifications: - Length: approx. 10m - Width: approx. 15m - Underside height: approx. 2.5m - Topside height: approx. 2.88m - Total area: approx. 150m² - Load capacity: 500kg/m² - Decking: 38mm P6 chipboard, natural finish on top, white underside - Column grid: 5.0m x 5.0m - NO cross bracing, stabilization with roof ties - New from factory, plus freight (shipping costs depend on postal code) Dkodpoy Izmzefx Af Ael Scope of delivery: - 12 x C profile 5000mm, sendzimir galvanized - 40 x S profile 4800mm, sendzimir galvanized - 12 x columns 2500mm, RAL 7016 - 3 x roof ties 2517mm, RAL 7016 - 70 x chipboard panels 2400 x 1000 x 38mm natural/white P6 - 12 x base plates for columns - 12 x anchor bolt kits for columns Our design department will gladly provide you with a non-binding quote tailored to your requirements. Price: €18,198 net plus statutory VAT You will receive an invoice with VAT shown separately. Options available upon request: - Impact protection - Guardrails - Transfer station - Stairs - Floor anchors - Steel construction can be powder-coated in the RAL colour of your choice (standard RAL 7016) Transport: Delivery by our partner freight forwarder upon request, shipping costs depend on postal code. Installation: Our trained staff are available to professionally assemble and dismantle your facility upon request. Our recommendation: Let us know your exact requirements… We are happy to support you from planning through to ordering and installation, assisting with the realization of your projects.

Būklė: naujas, 5x5m Mezzanine Platform, Load Capacity: 500kg/sqm, Underside Height: 3m, Approx. 25sqm, Modular Platform System Specifications: - Length: approx. 5m - Width: approx. 5m - Underside platform height: approx. 3.00 m - Top edge platform height: approx. 3.38 m - Total area: approx. 25 sqm - Load capacity: 500 kg/sqm - Decking: 38 mm chipboard P6, natural finish on top, white underneath - Support grid: 5.0m x 5.0m - NO CROSS BRACING, stabilisation via tie rods - Brand new ex works, freight cost depends on postal code Scope of delivery: - 02 x C profile 5000 mm, sendzimir galvanized - 08 x S profile 4800 mm, sendzimir galvanized - 04 x Support posts 3000 mm, RAL 7016 - 04 x Tie rods 3049 mm, RAL 7016 - 12 x Chipboard 2400 x 1000 x 38 mm, natural/white P6 - 04 x Foot plates for support posts - 04 x Anchor bolt sets for support posts Dkodpfxjy Izmue Af Ael OUR DESIGN DEPARTMENT WILL BE HAPPY TO PROVIDE YOU WITH A NON-BINDING, TAILORED QUOTE UPON REQUEST. Price: €5,288 net plus legally applicable VAT You will receive an invoice with VAT statement. Available as options upon request: - Impact protection - Handrail - Transfer station - Stairs - Floor anchors - Steel construction can be coated in your preferred RAL colour (standard is RAL 7016) Transport: Delivery can be arranged through our partner freight forwarder on request; shipping costs depend on the destination postcode. Installation: Our experienced staff are available to professionally assemble and disassemble your facility as required. Our recommendation: Let us know your requirements… We are happy to support you with your projects, from planning and ordering through to assembly.

Būklė: naujas, 10x15m mezzanine platform, load capacity: 500kg/sqm, lower edge: 3.0m, approx. 150sqm modular platform Specifications: - Length: approx. 10m - Width: approx. 15m - Lower edge of platform: approx. 3.0m - Upper edge of platform: approx. 3.38m - Total area: approx. 150 sqm - Load capacity: 500 kg/sqm - Decking: 38 mm thick P6 chipboard, natural finish on top, white on the bottom. Dkjdsy Izmbopfx Af Asl - Support grid: 5.0m x 5.0m - NO CROSS BRACING, reinforced with tie beam. - New from factory, plus freight charges depending on postal code. Scope of delivery: - 12 x C-profile 5000 mm, Sendzimir galvanized. - 40 x S-profile 4800 mm, Sendzimir galvanized. - 12 x Column 3000 mm, RAL 7016. - 03 x Tie beam 3049 mm, RAL 7016. - 70 x chipboard panels 2400 x 1000 x 38 mm, natural/white P6. - 12 x base plates for columns. - 12 x sets of anchor bolts for columns. OUR DESIGN DEPARTMENT WILL GLADLY PROVIDE YOU WITH A NON-BINDING, CUSTOMIZED QUOTATION BASED ON YOUR REQUIREMENTS. Price: €18,525 net plus applicable VAT. You will receive an invoice with VAT shown separately. Optional upon request: - Impact protection - Railings - Transfer station - Stairs - Floor anchors - Steel structure can be powder-coated in your desired RAL colour (standard RAL 7016). Transport: Delivery can be arranged by our partner freight forwarder, with shipping costs depending on your postal code. Installation: If required, our trained personnel will be happy to assist you with the professional installation and dismantling of your facility equipment. Our recommendation: Let us know your requirements... We are happy to support you in realizing your projects – from planning and ordering through to installation.

Būklė: naujas, 10x10m mezzanine storage platform, load capacity: 500kg/sq.m, clearance under mezzanine: 3m, approx. 100 sq.m, modular system platform. Specifications: - Length: approx. 10m Dkodpfsy Izl Rex Af Asl - Width: approx. 10m - Clearance below platform: approx. 3.0 m - Height above platform: approx. 3.38 m - Total area: approx. 100 sq.m - Load capacity: 500 kg/sq.m - Decking: 38 mm chipboard P6, natural finish top, white underside. - Support grid: 5.0m x 5.0m - NO CROSS BRACING, stiffening provided by beam struts. - New, direct from factory. Freight charges depend on postcode. Scope of supply: - 08 x C-profile 5000 mm, Sendzimir galvanized - 28 x S-profile 4800 mm, Sendzimir galvanized - 09 x Column 3000 mm, RAL 7016 - 03 x Beam strut 3049 mm, RAL 7016 - 47 x Chipboard panels, 2400 x 1000 x 38 mm, natural/white, P6 - 09 x Base plates for columns - 09 x Anchor bolt sets for columns OUR DESIGN DEPARTMENT WILL BE HAPPY TO PROVIDE YOU WITH A NON-BINDING QUOTE TAILORED TO YOUR REQUIREMENTS. Price: €13,167 net plus applicable VAT You will receive an invoice with shown VAT. Options on request: - Collision protection - Guardrails - Transfer station - Stairs - Floor anchors - Steel structure available powder-coated in a RAL colour of your choice (standard RAL 7016) Transport: Delivery can be arranged through our partner freight forwarder; costs are postcode-dependent. Assembly: Our trained staff is available on request to assist with the professional assembly and disassembly of your facility. Our recommendation: Let us know your requirements... We are happy to support you in the realization of your projects, from planning and ordering through to installation.

Būklė: naujas, 10x25m Storage Platform, Load Capacity: 500kg/sqm, Clearance: 3.0m, Approx. 250sqm Modular Mezzanine Specifications: - Length: approx. 10m - Width: approx. 25m - Clearance below platform: approx. 3.0m - Top edge of platform: approx. 3.38m - Total area: approx. 250 sqm - Load capacity: 500 kg/sqm - Decking: 38 mm chipboard, type P6, natural finish on top, white underside - Column grid: 5.0m x 4.15m - NO CROSS BRACING, stabilization via lateral strut - Brand new, ex works, plus freight according to destination postal code Scope of supply: - 020 x C-profile 4150 mm, Sendzimir galvanized - 004 x C-profile 4250 mm, Sendzimir galvanized - 066 x S-profile 4800 mm, Sendzimir galvanized - 021 x column 3000 mm, RAL 7016 - 004 x lateral strut 3049 mm, RAL 7016 - 0116 x chipboard 2400 x 1000 x 38 mm natural/white P6 - 021 x base plates for columns - 021 x anchor bolt sets for columns OUR DESIGN DEPARTMENT WILL BE HAPPY TO PROVIDE YOU WITH A NON-BINDING, CUSTOMIZED QUOTE ACCORDING TO YOUR REQUIREMENTS. Price: €26,487 net plus statutory VAT You will receive an invoice with VAT stated separately. Options on request: - Impact protection - Guard rails - Transfer station - Stairs - Floor anchors - Steel structure can be powder-coated in your desired RAL shade (standard is RAL 7016) Transport: Dodjy Izkyepfx Af Aokl Delivery can be arranged on request by our partner forwarding agent. Shipping costs depend on the destination postal code. Assembly: Our trained personnel are available to professionally install and dismantle your equipment if required. Our recommendation: Let us know your requirements... We are happy to support you in the realization of your projects, from planning to ordering to installation.

Būklė: naujas, bendras ilgis: 5 000 mm, bendras plotis: 4 250 mm, 21.25 m² Mezzanine Storage Platform, Top Edge 300 cm, 500 kg/m² load capacity, immediately available from stock, suitable for pallet jacks, modular platform system, steel mezzanine, storage level Specifications: - Length: 5000 mm - Width: 4250 mm - Size can be extended on request - Clear height below the platform: 2612 mm - Support grid: 4605 x 3850 mm - Additional flooring overhang: 200 mm - Supports, cross braces & tie rods powder-coated in RAL 7016 - Main & secondary beams galvanized - Flooring: 38 mm chipboard P6, top natural & bottom white - Brand new, in stock in Wietmarschen - IMMEDIATELY AVAILABLE The storage platform consists of: - 04 x supports - 02 x main beams C+350 - 06 x secondary beams S+260 - 01 x cross bracing - 02 x tie rods - 10 x chipboard panels - Includes connecting materials & bolts -- MULTIPLE UNITS IMMEDIATELY AVAILABLE -- Price: €2,590.00 net €3,082.10 gross You will receive an invoice with VAT shown separately. Transport: Delivery can be arranged via our partner shipping company on request. Costs are based on postal code. Assembly: Our trained staff are available to assist you with the professional assembly and disassembly of your equipment as needed. Our recommendation: Let us know your requirements… Dkjdpfx Aey Izh Ssf Aol We’re happy to support your projects from planning and ordering through to installation. Interested or have questions? Simply contact us by message or phone. Our phone number is on our company page. ☎️ You can reach us by phone Monday to Friday, 08:00 - 15:00. Alternatively, send us a message with your name and number, and we’ll call you back as soon as possible.

Būklė: naujas, 5x10m Storage Mezzanine, Load Capacity: 500kg/sqm, Underside Height: 2.5m, Approx. 50sqm Modular Platform Technical Data: - Length: approx. 5m - Width: approx. 10m - Underside height (platform clearance): approx. 2.5m - Top edge of platform: approx. 2.88m - Total area: approx. 50 sqm - Load capacity: 500 kg / sqm - Decking: 38mm P6 particle board, natural top, white underside - Support grid: 5.0m x 5.0m - NO CROSS BRACING, reinforced with post-tie braces - New product, ex works; freight costs depend on delivery postcode Scope of Delivery: - 04 x C-profile beams, 5000 mm, Sendzimir galvanized - 14 x S-profile beams, 4800 mm, Sendzimir galvanized - 06 x Columns, 2500 mm, RAL 7016 - 03 x Post-tie braces, 2517 mm, RAL 7016 - 24 x Particle boards, 2400 x 1000 x 38 mm, natural/white P6 - 06 x Base plates for columns - 06 x Column anchor bolt sets Price: Dsdpfx Afey Izh Ee Ajkl €7,575 net Plus statutory VAT You will receive an invoice with VAT shown separately. Options on request: - Impact protection barriers - Guardrails - Transfer stations - Staircases - Floor anchors - Steel construction can be powder-coated in your desired RAL colour (standard RAL 7016) Transport: Delivery available via our partner freight forwarder; shipping costs vary depending on the delivery postcode. Assembly: Our trained staff are available to support you with professional installation and dismantling of your equipment upon request. Our recommendation: Let us know your requirements… We are happy to support you with the realization of your projects – from planning through ordering to assembly.

Būklė: naujas, Mezzanine platform built to your specifications! Load capacity: 250 - 1,000 kg/m² Why choose mezzanine platforms from BLT Lagertechnik? - We are a family-owned business: We aim for long-term partnerships. - We are specialists: We accommodate all spans, loads, and levels of complexity. - We care: Our cold-formed system is the most sustainable solution available. Scope of delivery: - Columns - Main beams - Secondary beams - Flooring panels - Assembly materials and installation manual Dkedsy Izhrspfx Af Ajl Optional upon request: - Impact protection - Railings - Transfer stations - Stairs - Floor anchors - Steel structure can be coated in your desired RAL colour (standard: RAL 7016) Transport: Delivery is handled by our partner shipping company upon request; cost depends on postal code. Installation: Our trained personnel are available to professionally install and dismantle your equipment if required. Our recommendation: Let us know your requirements... We are happy to assist you in realising your projects—from planning and ordering to installation.