Ess Uniarc 5 pirkti naudotą (69 824)

Gamybos metai: 1990, Sąlyga: geras (naudotas), Wickert Maschinenbau GmbH Landau vulcanizing press Year of manufacture: 1990 Machine No.: 2559 Press force: 2800 kN Heating plates: 500 x 500 mm Heating: electric Plate opening: 200 mm Control system: Siemens S5 OP17 (upgrade to S7 possible) Including sliding table, vacuum pump, vacuum chamber, storage tank Nwedpfxjn Sm Ayo Af Nob Good used condition. Comes with CE marking.

Sąlyga: naudotas, Gamybos metai: 2013, veikimo valandos: 14 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: TJ-350-20/40 KPSI //TJ-160-20/40 KPSI, bendras plotis: 1 500 mm, bendras ilgis: 3 000 mm, bendras aukštis: 2 500 mm, slėgis: 2 800 juosta, darbinis slėgis: 2 800 juosta, kuras: dyzelinas, bendras svoris: 3 000 kg, sukimosi greitis (min.): 700 aps./min, sukimosi greitis (maks.): 1 500 aps./min, aukšto slėgio žarnos ilgis: 60 000 mm, paskutinio kapitalinio remonto metai: 2025, Įranga: sūkių greitis be galo kintamas, Lot of 5 UHP water jet machines, with a large quantity of spare parts and accessories as follows: 1 x high-pressure water jet unit with Deutz-MWM V-8 diesel engine Continuously adjustable pressure from 0–1,400 bar and 0–2,800 bar, overflow/dump system, with piston change kit as follows: 1,400 bar at 99 litres/minute and 2,800 bar at 46 litres/minute. The high-pressure head with bushings and valves remains the same for both pressure levels, 1,400 and 2,800 bar. The pressure change between 1,400 and 2,800 bar is achieved through a simple piston exchange. The system was built in 2013 and kept in operation as a backup machine, but was only used once for 14 hours at 2,800 bar for a heat exchanger cleaning project. This UHP machine is mounted on a galvanised steel frame. The Deutz-MWM engine was acquired as a used engine with approx. 3,000 operating hours and, in 2013, fitted with a new Jetech UHDW high-pressure water jet pump. Additionally, there is a large amount of accessories and spare parts, e.g. dump guns & foot valves, swivels, rotary joints, surface cleaners, rotating nozzles, high-pressure lances, nozzle inserts, seals, special tools, etc. An identical UHP water jet unit is also available, but with a Scania V-8 engine and 850 operating hours at max. 1,400 bar / 99 litres/minute. This unit also features a piston change kit for 1,400 bar/99 litres/minute and 2,800 bar/46 litres/minute. This system is installed in a 20-foot container with an 800 l diesel tank, and a workbench / vice. In addition, three further high-pressure water jet units, each with 110 kW output, are available—two of which are fitted with piston change kits for 1,400 and 2,800 bar. A third system is a Kamat K11000, with 2,800 bar operating pressure. Also available is a hydraulic heat exchanger cleaning device with rotating lance, mounted on a scissor lift table and suitable for very large heat exchangers. Nwedpfxexc E Tro Af Njb All equipment comes from the closure of my company due to my retirement. A buyer is sought for all machines and accessories as a complete package. Price for the entire lot: €150,000 (collection only) in D-36404 Vacha/Germany; delivery within Germany is possible for an additional fee.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: SVC5003396, matavimo diapazonas X ašis: 500 mm, matavimo diapazonas Y ašis: 450 mm, matavimo diapazonas Z ašis: 300 mm, Įranga: dokumentacija / vadovas, Mašina buvo aptarnauta gamintojo 2022 m. rugpjūtį! TECHNINĖS CHARAKTERISTIKOS Matavimo diapazonas X ašis: 500 mm Matavimo diapazonas Y ašis: 450 mm Nedpfx Afsyaq Hye Njwb Matavimo diapazonas Z ašis: 300 mm Bendras matavimo diapazonas: 500 x 450 x 140 mm KOMPLEKTACIJA Dokumentacija / vadovas Kalibracinis rutulys Įvairūs zondų prailgintuvai Trigubas Renishaw zondų keitimo sistema ZONE3 mokymo detalė Metrologijos programinė įranga

Sąlyga: naudotas, Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Naudotas Mark kompresorius su džiovintuvu. Naudotas, geros techninės būklės. Paruoštas atsiėmimui. Nwjdpfxswprvie Af Neb

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2018, pjūklo disko skersmuo: 550 500 mm, The machine is in perfect technical condition and has seen very little use. Designed for processing aluminium and PVC profiles. Mitre cuts are possible in 3 planes, and it can be used as a notching saw; manual adjustment of the horizontal saw blade by up to 20 mm in front of the vertical blade is possible. Cutting options: rectangular, single-sided mitre, double-sided mitre, and three-sided mitre cuts. Suitable for processing profiles up to 300 mm, with width at 90° up to 90 mm, and mitre angles up to 30°. Horizontal notching depth up to 185 mm, vertical up to 210 mm at 90°. Cutting width at 90°: 300 mm, profile height: 280 mm. Manual adjustment of cut and height, positioning via mechanical digital displays. Vertical blade swing range: 30°–90°–30° (front/centre/rear), adjusted manually and positioned using a digital display. Vertical blade swing range also 30°–90°–30°, manual, with positioning via digital display. Material stop (table top) can be manually rotated left and right within 30°–90°–30° and positioned using a measurement scale. Material depth stop is manually adjustable via sliding carriage and hand clamp, positioning via digital display. Nodpfx Asvtarnsf Newb

Sąlyga: geras (naudotas), Gamybos metai: 1963, Stroke = 250 mm Njdpsydlxfofx Af Newb

Sąlyga: naudotas, Gamybos metai: 2006, No. 3195 CNC Machining Center BIESSE Rover C 6.50 CONF.2 Used, year of manufacture 2006 Machine already dismantled According to our customer, the machine is fully operational Multiple workpieces can be machined simultaneously on this machine Working area X: 4,850/4,600 mm Working area Y: 1,535 mm Electrical power: 228 kW, 39 A Required floor space approx. 8,100 x 6,500 mm (L x W) Total weight approx. 6,800 kg Sale on behalf of a customer, ex location Poland, without dismantling, transport, or installation Subject to errors in description and price Dismantling, loading, and transport by us available as an option To avoid any misunderstandings, a site inspection by appointment is possible and recommended Sale is made as-is Technical data, condition description, year of manufacture, and scope of delivery as per manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty for used machines; sold as seen Pictures and videos are for example purposes only and do not represent the actual items included Payment terms: Prices plus VAT, payment prior to collection or shipping Nedpevn R A Hsfx Af Njwb Delivery terms: ex location

Sąlyga: naujas, Gamybos metai: 2024, Būklė: nauja Pagaminimo metai: 2024 Sandėlio numeris: 9722 Pristatymo laikas: iš karto, galimas tarpinis pardavimas Kilmės šalis: Turkija Kaina: 16 600 € Lizingo įmoka: 318,72 € Sandėlyje: 1 vnt. Lenkimo ilgis: 2050 mm Maks. lenkimo pajėgumas - statybinis plienas: 3 mm Viršutinio volo skersmuo: 130 mm Voliavimo greitis: 3,5 m/min Variklio galia: 2,2 kW Ilgis: 3200 mm Plotis: 750 mm Aukštis: 1000 mm Svoris: 1500 kg 3 volai Asimetrinė volų konfigūracija – su prilenkimu Nwedpfjwiqpbjx Af Nob 2 varomi volai su stabdžių varikliu GRŪDINTI VOLAI Šoninių volų nustatymas rankiniu būdu Atlenkiamas viršutinis volas į priekį Pirmyn/atgal darbas Kūginis valcavimas pakreipiant galinį volą Mobilus valdymo pultas EKSPLOATAVIMO INSTRUKCIJA VOKIEČIŲ KALBA PAPILDOMOS PARINKTYS: (pristatymo laikas su parinktimis apie 8 savaites) Variklių valdoma šoninių volų nustatymas Skaitmeninis šoninių volų padėties indikatorius

Sąlyga: naujas, Gamybos metai: 2026, Būklė: nauja Nedpfowirz Sox Af Newb Pagaminimo metai: 2026 Sandėlio numeris: 070153 Pristatymo laikas: greitai, galimas tarpinis pardavimas Kilmės šalis: Turkija Kaina: 4800 € Sandėlyje: 1 vnt. Ritės svoris: 500 kg Maks. ritės išorinis diametras: 1200 mm Min. ritės vidinis diametras: 400 mm Maks. ritės vidinis diametras: 550 mm Maks. ritės plotis: 300 mm Min. ritės plotis: 50 mm Min. ritės plotis su pneum. spaudimo svirtimi: 80 mm Variklis: 0,55 kW Ilgis: 1400 mm Plotis: 1200 mm Aukštis: 1550 mm Svoris: 190 kg Varomasis pavara Mechaniškai reguliuojamas ritės šerdis su 4 žnyplėmis Išvyniojimo greičio, įsibėgėjimo ir sulėtėjimo laiko reguliavimas SICK fotoelektrinis artumo jutiklis kilpos kontrolei

Sąlyga: naujas, Gamybos metai: 2026, Būklė: nauja Gamybos metai: 2026 Sandėlio numeris: 070155 Pristatymo laikas: nedelsiant, galimas tarpinis pardavimas Kilmės šalis: Turkija Kaina: 6900 € Lizingo įmoka: 133,17 € Sandėlyje: 1 vnt. Ritės svoris: 500 kg Didžiausias ritės išorinis skersmuo: 1200 mm Mažiausias ritės vidinis skersmuo: 400 mm Didžiausias ritės vidinis skersmuo: 550 mm Didžiausias ritės plotis: 300 mm Mažiausias ritės plotis su pneumatiniu prispaudimo svirčiu: 80 mm Ilgis: 1450 mm Plotis: 1200 mm Aukštis: 1640 mm Nodpfx Afewirmuo Newb Svoris: 260 kg Variklinė pavara Mechaniškai reguliuojama ritės šerdis su 4 žnyplėmis Greičio reguliavimas išvyniojimui bei pagreičio ir stabdymo laikams SICK fotoelektrinis artumo jutiklis kilpos kontrolei PNEUMATINIS PRISPAUDIMO SVIRTIS

Sąlyga: naujas, Gamybos metai: 2025, Būklė: nauja Metai: 2025 Sandėlio numeris: 090120 Pristatymo laikas: iš karto, gali būti parduota Kilmės šalis: Turkija Kaina: 7100 € Lizingo įmoka: 137,03 € Bestselleris: 1 Sandėlyje: 1 Lenkimo ilgis: 1050 mm Maks. lenkimo talpa – konstrukcinis plienas: 3 mm Viršutinio veleno skersmuo: 90 mm Vyniojimo greitis: 6 m/min Variklio galia: 1,1 kW Ilgis: 1630 mm Plotis: 700 mm Aukštis: 1200 mm Svoris: 480 kg 3 velenai Asimetrinis velenų išdėstymas 2 varomieji velenai su stabdžiu varikliu Galinio veleno reguliavimas rankiniu ratu Nwsdpfx Afewira Ie Neb Vielos grioveliai apatinėje ir galinėje vėlenose GRŪDINAMI VELENAI Atverčiamas viršutinis velenas Dešinės/kairės eigos valdymas su dvigubu kojiniu jungikliu Kūginio vyniojimo įranga Eksploatavimo instrukcija VOKIEČIŲ kalba

Sąlyga: naujas, Būklė: nauja Pristatymo laikas: apie 12 savaičių nuo užsakymo Kilmės šalis: Turkija Kaina: 39 400 € Lizingo įmoka: 628,39 € Speciali kaina: 32 900 € Lankstymo ilgis: 2050 mm Maks. lankstymo talpa – konstrukcinis plienas: 10 mm Maks. lakšto storis be įlenkimo – konstrukcinis plienas: 10 mm Maks. lakšto storis su įlenkimu – konstrukcinis plienas: 8 mm Maks. lakšto storis be įlenkimo prie D=5x viršutinio volo: 10 mm Maks. lakšto storis be įlenkimo prie D=1,5x viršutinio volo: 8 mm Maks. lakšto storis su įlenkimu prie D=5x viršutinio volo: 8 mm Maks. lakšto storis su įlenkimu prie D=1,5x viršutinio volo: 6 mm Viršutinio volo skersmuo: 200 mm Apatinio volo skersmuo: 200 mm Šoninio volo skersmuo: 180 mm Vyniojimo greitis: 6 m/min Ilgis: 3850 mm Plotis: 1350 mm Aukštis: 1290 mm Svoris: 3750 kg Varomas volų pavaros variklis Varomi viršutinis ir apatinis volai Hidraulinis šoninių volų nustatymas 3 skaitmeniniai ekranai Hidrauliniai atverčiami laikikliai Nwodjyb S Aropfx Af Njb Grūdinti volai Kūginio lenkimo įranga Eksploatavimo instrukcija vokiečių arba anglų kalba PASIRINKIMAI: Viršutinis palaikymas Šoninis palaikymas Kintamas greitis NC valdymas

Sąlyga: naujas, Būklė: nauja Pristatymo laikas: apie 12 savaičių nuo užsakymo Kilmės šalis: Turkija Kaina: 34 900 € Lizingo įmoka: 555,81 €/mėn. Speciali kaina: 29 100 € Lenkimo ilgis: 2050 mm Maks. lenkimo galia - konstrukcinis plienas: 8 mm Didžiausias lakšto storis be išankstinio lenkimo - plienas: 8 mm Didžiausias lakšto storis su išankstiniu lenkimu - plienas: 6 mm Didžiausias lakšto storis be išankstinio lenkimo prie D=5x viršutinio volelio: 8 mm Didžiausias lakšto storis be išankstinio lenkimo prie D=1,5x viršutinio volelio: 6 mm Didžiausias lakšto storis su išankstiniu lenkimu prie D=5x viršutinio volelio: 6 mm Didžiausias lakšto storis su išankstiniu lenkimu prie D=1,5x viršutinio volelio: 4 mm Viršutinio volelio skersmuo: 180 mm Apatinio volelio skersmuo: 180 mm Šoninio volelio skersmuo: 150 mm Volelių sukimo greitis: 5 m/min Ilgis: 3850 mm Nedpjyb S Afefx Af Njwb Plotis: 1350 mm Aukštis: 1290 mm Svoris: 3300 kg Variklinė volelinių pavara Varomas viršutinis ir apatinis voleliai Hidraulinis šoninių volelių nustatymas 3 skaitmeniniai ekranai Hidrauliniai atverčiami guoliai Grūdinti volai Kūginio lenkimo įrenginys Naudojimo instrukcija VOKIŠKAI arba ANGLIŠKAI

Sąlyga: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €55,900 Leasing rate: €1,056.51 Nsdjyb Sz Ispfx Af Newb Bending length: 3,100 mm Max. bending capacity – structural steel: 9 mm Max. sheet thickness without pre-bending at D=5x upper roll: 8 mm Max. sheet thickness without pre-bending at D=1.5x upper roll: 7 mm Max. sheet thickness with pre-bending at D=5x upper roll: 7 mm Max. sheet thickness with pre-bending at D=1.5x upper roll: 5 mm Upper roll diameter: 245 mm Lower roll diameter: 245 mm Side roll diameter: 180 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 5,350 mm Width: 1,600 mm Height: 1,470 mm Weight: 6,850 kg 4 rolls Upper roll drive via hydromotor and planetary gearbox, lower roll drive via gear and cardan shaft Hydraulic adjustment of the lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic release of upper roll Hydraulic drop-end 2 working speeds Overload protection Movable control panel Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Sąlyga: naujas, Gamybos metai: 2024, Condition new Year of manufacture: 2024 Stock number: 9729 Delivery time: immediate, subject to prior sale Country of origin: Turkey Price: €28,450 Leasing rate: €488.96 Stock quantity: 1 Special price: €25,600 Bending length: 1550 mm Max. bending capacity – mild steel: 7 mm Max. sheet thickness without prebending at D=5x top roll: 7 mm Max. sheet thickness without prebending at D=1.5x top roll: 4.5 mm Max. sheet thickness with prebending at D=5x top roll: 4.5 mm Max. sheet thickness with prebending at D=1.5x top roll: 3.5 mm Top roll diameter: 150 mm Bottom roll diameter: 150 mm Side roll diameter: 130 mm Rolling speed: 1.5 / 6 m/min Motor power: 4 kW Length: 3750 mm Width: 960 mm Height: 1100 mm Weight: 2500 kg 4 rolls Top roll driven by hydromotor and planetary gearbox; bottom roll driven by gear and drive shaft Nwsdeyb Szhspfx Af Neb Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Cone bending device Hydraulic release of top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS: (Delivery time with options approx. 10 weeks) Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control unit IMPORTANT POINTS FOR CONICAL BENDING: Max. sheet thickness is 50% of rated capacity Cone length may be max. 30% or must exceed 60% of roll length Hardened rolls are recommended

Sąlyga: naujas, Condition: New Lead time: approx. 10 weeks from order Country of origin: Turkey Price: €31,600 Leasing rate: €603.56 Bending length: 2050 mm Max. bending capacity - mild steel: 6 mm Max. plate thickness (without pre-bending at D=5x top roll): 6 mm Max. plate thickness (without pre-bending at D=1.5x top roll): 4 mm Max. plate thickness (with pre-bending at D=5x top roll): 4 mm Max. plate thickness (with pre-bending at D=1.5x top roll): 3 mm Top roll diameter: 150 mm Lower roll diameter: 150 mm Side roll diameter: 130 mm Rolling speed: 1.5 / 6 m/min Motor power: 4 kW Length: 4250 mm Width: 960 mm Height: 1100 mm Weight: 2800 kg 4 rollers Top roll driven by hydraulic motor and planetary gear, bottom roll driven by gear and cardan shaft Hydraulic adjustment for bottom and side rolls Njdpfx Afsyb Szbj Newb Digital display for bottom and side roll positions Hardened rolls Conical bending device Hydraulic release of top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control console Equipment compliant with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL ROLLING: Maximum plate thickness is 50% of nominal capacity Conical length must be max. 30% or exceed 60% of roll length Hardened rolls are recommended

Sąlyga: naujas, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €57,000 Leasing rate: €1,077.30 Bending length: 2,550 mm Max. bending capacity - structural steel: 13 mm Max. sheet thickness without pre-bending at D=5x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 10 mm Max. sheet thickness with pre-bending at D=5x top roll: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 260 mm Bottom roll diameter: 260 mm Side roll diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4,800 mm Width: 1,600 mm Height: 1,550 mm Weight: 6,800 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox, bottom roll driven by gear and cardan shaft Hydraulic adjustment of bottom and side rolls Digital readout for bottom and side roll positions Hardened rolls Cone bending device Hydraulic release of top roll Hydraulic drop-end bearing Nwodpfxjyb Sy Rj Af Njb 2 working speeds Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable roll speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES ON CONE BENDING: The max. sheet thickness is 50% of nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Sąlyga: naujas, Būklė: nauja Pristatymo laikas: apie 12 savaičių nuo užsakymo Kilmės šalis: Turkija Kaina: 26 300 € Lizingo įmoka: 502,33 € Lenkimo ilgis: 2050 mm Maks. lenkimo geba - statybinis plienas: 4 mm Maks. lakšto storis be užlenkimo D=5x viršutinis volas: 4 mm Maks. lakšto storis be užlenkimo D=1,5x viršutinis volas: 3 mm Maks. lakšto storis su užlenkimu D=5x viršutinis volas: 3 mm Maks. lakšto storis su užlenkimu D=1,5x viršutinis volas: 2 mm Viršutinio volo skersmuo: 130 mm Apatinio volo skersmuo: 130 mm Šoninio volo skersmuo: 130 mm Vyniojimo greitis: 5 m/min Nedpsyb Sy Djfx Af Nswb Variklio galia: 2,2 + 1,1 kW Ilgis: 3800 mm Plotis: 1150 mm Aukštis: 1110 mm Svoris: 2450 kg Variklio pavaros volai Varomas viršutinis ir apatinis volai Hidraulinis šoninių volų nustatymas 3 skaitmeniniai ekranai Hidrauliniai atlenkiami guoliai Grūdinti volai Kūginio lenkimo įranga Eksploatavimo instrukcija vokiečių arba anglų kalba PASIRINKTINAI: Viršutinė atrama Šoninė atrama Kintamas greitis NC valdymas

Sąlyga: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €48,100 Leasing rate: €918.71 Bending length: 2550 mm Max. bending capacity – structural steel: 9 mm Max. sheet thickness without pre-bending at D=5x top roll: 9 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 7 mm Max. sheet thickness with pre-bending at D=5x top roll: 7 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 5 mm Top roll diameter: 220 mm Lower roll diameter: 220 mm Nwsdpfx Afoyb Sywe Neb Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 4900 mm Width: 1150 mm Height: 1250 mm Weight: 4600 kg 4 rolls Top roll driven by hydromotor and planetary gear, lower roll driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic upper roll unloading Hydraulic swing-out bearing 2 working speeds Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: Infinitely variable roll speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Sąlyga: naujas, Condition: new Delivery time: approx. 10 weeks from order Nwsdpfxeyb Syko Af Nob Country of origin: Turkey Price: €52,700 Leasing rate: €996.03 Bending length: 2,550 mm Max. bending capacity – structural steel: 10 mm Max. sheet thickness without pre-bending at D = 5x top roll: 10 mm Max. sheet thickness without pre-bending at D = 1.5x top roll: 8 mm Max. sheet thickness with pre-bending at D = 5x top roll: 8 mm Max. sheet thickness with pre-bending at D = 1.5x top roll: 6 mm Top roll diameter: 245 mm Bottom roll diameter: 245 mm Side roll diameter: 180 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4,800 mm Width: 1,600 mm Height: 1,470 mm Weight: 6,170 kg 4 rolls Top roll drive by hydraulic motor and planetary gearbox, bottom roll drive by gear and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Conical bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL ROLLING: Maximum sheet thickness is 50% of the nominal capacity Cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Sąlyga: naujas, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €49,900 Leasing rate: €953.09 Bending length: 2050 mm Max. bending capacity - mild steel: 13 mm Max. sheet thickness without pre-bending at D=5x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 10 mm Max. sheet thickness with pre-bending at D=5x top rolls: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 245 mm Lower roll diameter: 245 mm Side roll diameter: 180 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4300 mm Width: 1600 mm Height: 1470 mm Weight: 5450 kg 4 rolls Nsdpfxjyb Sydj Af Nowb Top roll driven by hydraulic motor and planetary gearbox, lower rolls driven by gearwheel and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic release of top roll Hydraulic drop-end 2 working speeds Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS: Continuously variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: Maximum sheet thickness is 50% of rated capacity Cone length may be max. 30% or must be more than 60% of roll length Hardened rolls are recommended

Sąlyga: naudotas, Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, Presavimo plokštė (darbinis plotas) 2500 mm × 1300 mm Maksimalus ruošinio (skydelio) ilgis 2500 mm Nodpfx Ajx Ezpwof Nswb Maksimalus ruošinio plotis 1300 mm Ruošinio storis (tipinis darbinis diapazonas) min ~12 mm, maks ~50 mm (standartinėje konfigūracijoje) Bendra spaudimo jėga / slėgio pajėgumas iki ~90 tonų (priklausomai nuo komplektacijos) Šildymas / šildymo plokštės: terminių alyvų kaitinamos plokštės; darbinė temperatūra iki ~120 °C (šildomų plokščių versijoje) Energijos tiekimas / įrengtoji galia (kai kuriuose aprašymuose): ankstesni duomenys nurodo ~5,5 kW šaltai presavimo versijai. 6 vertikalūs cilindrai (plokštės spaudimui) kai kuriose pilnos komplektacijos versijose.

Sąlyga: geras (naudotas), Gamybos metai: 2000, CNC portalo plazminio pjovimo staklė Gamintojas: Messer Modelis: Omnimat L5000 Metai: 2000 CNC valdymo sistema: Fanuc Darbo sritis: 3000 x 6000 mm Nwsdpfx Ajhwtn Ief Njb Galimas prailginimas 1 plazminė degiklė su Hypertherm HT2000 maitinimo šaltiniu 3 autogeniniai degikliai be stalo be filtro 21126ä

Sąlyga: naujas, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €174,688 Leasing rate: €3,301.60 Laser power: 3 kW Manual table / Shuttle table: Manual table Max. sheet thickness – Mild steel: 16 mm Max. sheet thickness – Stainless steel: 8 mm Max. sheet thickness – Aluminium: 8 mm Max. sheet thickness – Copper: 5 mm Max. sheet thickness – Brass: 8 mm Cutting area: 3060 x 1530 mm X-axis: 3060 mm Y-axis: 1530 mm Z-axis: 140 mm Max. sheet size: 3048 x 1524 mm Max. sheet weight: 160 kg/m² Max. X-axis speed: 90 m/min Max. Y-axis speed: 90 m/min Max. simultaneous speed: 127 m/min Max. acceleration: 14 m/s² Positioning accuracy: ±0.05 mm Repeatability: ±0.05 mm The HD-FO is our compact entry-level model. Control system, laser source and cooling are integrated into the machine, keeping the overall footprint as small as possible. The manually extendable table slides out sideways for loading and unloading. The cutting head features automatic focus adjustment. This makes the system an especially economical, fast and easy-to-operate production machine. The system consists of the following components: - Manual loading and unloading table - Enclosed cutting cabin with safety glass - CNC graphical controller with touchscreen - Brilase Premium laser source Nwedpfox U Elhox Af Nob - Cutting head with automatic focus adjustment - Integrated chiller for cutting head and laser source - CAD/CAM software Latek for programming and optimized material usage (nesting) - Positioning laser - Sheet check system (automatic detection of sheet position and dimensions) - Automatic nozzle cleaning - Scrap box - Work area lighting - Multi-chamber extraction system - Remote maintenance access - Air conditioning for control cabinet - Equipped according to CE directives ALTERNATIVE LASER SOURCES: Material 4 kW 6 kW Mild steel S235 20 mm 25 mm Stainless steel (304) 10 mm 15 mm Aluminium (5083) 12 mm 20 mm Copper 6 mm 10 mm Brass (CuZn39 Pb3) 10 mm 12 mm OPTIONS: - Extraction unit with filter module - Shuttle table

Sąlyga: naujas, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €188,488 Leasing rate: €3,562.42 Laser power: 3 kW Manual table / shuttle table: Shuttle table Max. sheet thickness – mild steel: 16 mm Max. sheet thickness – stainless steel: 8 mm Max. sheet thickness – aluminum: 8 mm Max. sheet thickness – copper: 5 mm Max. sheet thickness – brass: 8 mm Total connected load: 26.4 kW (including extraction) Cutting area: 3,100 x 1,525 mm X-axis: 3,100 mm Y-axis: 1,525 mm Z-axis: 125 mm Max. sheet size: 3,084 x 1,524 mm Max. sheet weight: 240 kg (for 3–12 kW) / 400 kg/m² Max. total weight for double table: 2,200 kg (for 3–12 kW) / 360 kg Max. X-axis speed: 100 m/min Max. Y-axis speed: 100 m/min Max. simultaneous speed: 141 m/min Max. acceleration: 14 m/s² Positioning accuracy: +/- 0.05 mm Repeatability: +/- 0.05 mm Table change time: 25 s The HD-FN features two tables that are automatically interchanged to enable simultaneous cutting and loading/unloading. The shuttle table is positioned longitudinally, providing optimal accessibility for optional loading and unloading systems. CNC control, laser source, and cooling are all integrated into the machine. The cutting head features automatic focus adjustment. The system includes the following components: - Shuttle table (longitudinally positioned for optimal accessibility for optional loading and unloading systems) - Enclosed cutting area with safety glass - CNC graphic controller with touchscreen Nwodpfx Aox U Elbsf Njb - Brilase Premium laser source - Cutting head with automatic focus adjustment - Integrated cooling unit for cutting head and laser source - Lantek CAD/CAM software for programming, including autonesting - Positioning laser - Sheet check system (automatic detection of sheet position and dimensions) - Automatic nozzle cleaning - Central lubrication - Scrap bin - Work area lighting - Multi-chamber extraction system - Light curtain safeguard for the shuttle table - Remote maintenance access - Control cabinet air-conditioning - Equipped according to CE guidelines ALTERNATIVE LASER SOURCES: | Material | 4 kW | 6 kW | 12 kW | 15 kW | 20 kW | |-----|-----|-----|-----|-----|-----| | Mild steel S235 | 20 | 25 | 30 | 35 | 40 | | Stainless steel 304 | 10 | 15 | 25 | 35 | 40 | | Aluminum 5083 | 12 | 20 | 30 | 35 | 40 | | Copper | 6 | 10 | 15 | 15 | 15 | | Brass (CuZn39 Pb3) | 10 | 12 | 20 | 20 | 20 | OPTIONS: - Extraction unit with filter - Sheet handling systems - Automatic nozzle changer