Dvivietis Suolas Obliavimo pirkti naudotą (1 484)

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Heavy-Duty Surface Planer Robust German engineering Fine-planed machine tables, total table length: 3000 mm Table adjustment with ball bearings Chip removal setting with micrometer dial Adjustment for concave and pointed profiles with scale display Heavy-duty cast iron fence, tiltable to 45 degrees and height-adjustable Machine completely rewired Automatic star-delta starter Motor protection switch Motor brake Emergency stop switch CE compliant Cutterhead with 4 straight knives Cutterhead diameter: 120 mm Planing width: 410 mm Fpedpfx Aovi H Nfeb Ssb Working table length: 3,000 mm Cutterhead speed: 5,000 rpm Motor: 400 V, 4.0 kW, 50 Hz Weight approx.: 1,050 kg Note on used machines: • Technical specifications are subject to error and prior sale. • Stated prices are ex works, loaded free of charge at location! • The machines have been cleaned and function tested. • All machines are sold as seen, with no warranty or guarantee whatsoever. The buyer is free to inspect the machines on site. • Special agreements are only valid in written form. (We will only respond to inquiries that include your address and telephone number!)

Sąlyga: naudotas, Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, obliavimo aukštis: 230 mm, obliavimo plotis: 320 mm, FEM9-32XC / RHINO 800XL Feeler-Serie 9 FEELER – Serie A. Leistungsdaten: (1) Arbeitsbreite: 18–320 mm (2) Arbeitshöhe: 6–160^230 mm (3) Min. Werkstücklänge: 240 mm (4) Vorschubgeschwindigkeit: 7–36 m/min B. Motoren: (1) 1. untere Horizontale-Spindel: 10^20 PS mit Außenlager (2) 2. rechte Vertikal-Spindel: 10^15 PS mit Außenlager (3) 3. linke Vertikal-Spindel: 10^20 PS mit Außenlager (4) 4. obere Horizontale-Spindel: 10^20 PS mit Außenlager (5) 5. untere Horizontale-Spindel: 10^20 PS mit Außenlager (6) 6. rechte Vertikalspindel: 10^15 PS mit Außenlager (7) 7. linke vertikal/horizontale Spindel: 10^15 PS mit Außenlager (8) 8. obere Horizontale-Spindel: 10^20 PS mit Außenlager (9) 9. untere Horizontale-Spindel: 10^20 PS mit Außenlager (10) Vorschubantrieb: 15 PS (mit Frequenzumrichter) (11) Höhenverstellung: 2 PS C. Spindel: (1) Spindeldurchmesser: 50 mm bei 1., 2., 3., 4. und 9. Spindel; 40 mm bei 5., 6., 7. und 8. Spindel (2) Spindeldrehzahl: 6200 U/min (3) Verstellbereich der Vertikalspindeln: 80 mm (4) Verstellbereich der Horizontalspindeln: 35 mm D. Schnittkreise: (1) 1. untere Horizontale-Spindel: 100–180 mm (2) rechte Vertikalspindel: 110–250 mm (3) linke Vertikalspindel: 110–250 mm (4) 1. obere Horizontale-Spindel: 110–250 mm (5) 2. untere Horizontale-Spindel: 110–250 mm (6) rechte Vertikalspindel: 110–250 mm (7) linke Vertikalspindel: 110–250 mm (8) obere Horizontale-Spindel: 110–250 mm (9) untere Horizontale-Spindel: 110–250 mm E. Sonstiges: (1) Absaugstutzendurchmesser: 160 mm (2) Vorschubtisch: 2^2,5 m (3) Vorschubwalzendurchmesser: 140 mm (4) *Mit 50 mm Messerkopf F. Standardausstattung: (1) Digitale Vorschubantrieb-Anzeige DPRLF-40K (2) Automatische Tischschmierung (3) Zentrale Punkt-zu-Punkt-Schmierung (4) Pneumatische Niederhalter an den oberen Spindeln (5) Pneumatische Anschlagleiste an den linken Spindeln (6) CE-Kennzeichnung (7) Motoren: Effizienzklasse IE3 (8) Bearbeitungsreihenfolge: Unten, Rechts, Links, Oben, Unten, Rechts, Links, Oben, Unten Optionale Ausstattung / Zubehör: Fpjdpoxrla Rsfx Ab Sob OP014-15: Stufenloser Vorschubregler, 15 PS Frequenzumrichter OP001: Pneumatische Steuerung 1. und 2. Vorschubwalze (Höhenverstellung) OP041: Außenlager für 2., 3., 6., 7. Spindel OP017: Digitale Positionsanzeige für 3., 4., 7., 8. Spindel OP042C: Schallschutzkabine, verbesserte Ausführung OP023AE3-15: FEED-Motor, 15 PS (E3) OP023BE3-10-15: Spindelmotor 10^15 PS (Y/A) (E3) OPO08-5: Verlängerungstisch 2,5 m mit Ständer und Anschlag OP023BE3-10-20: Spindelmotor 10^20 PS (YiA) (E3) OP002: Drei Betriebsarten Vorschubwalzen pneumatische Höhenverstellung OPO10-230: Erhöhte Arbeitsbreite 230 mm / 2., 3., 6., 7. Spindel OPO08A: Luftkissentisch 320–400 mm

Sąlyga: naudotas, Profiling spindles WEINIG Fpodsq Tn Tuopfx Ab Sjb 1 pc length 1100 mm 1 pc length 650 mm 2 pcs length 700 mm 2 pcs length 900 mm

Sąlyga: naudotas, Kölle AH 50 tipo obliavimo staklės arba tiesiog obliavimo staklės, skirtos medienos lyginimui ir glodinimui (obliavimui). Įskaitant reguliuojamą kampinį atramą. Darbo plotis: 500 mm. Peiliai: Z4 apsukami peiliai. Variklis: 5,5 kW. Fodpfxox Ilq Re Ab Sopb

Sąlyga: labai geros būklės (naudotas), Keturių pusių obliavimo staklės Weinig Profimat 22 N su 6 galvutėmis – paskutinė universali. Įrankiai komplekte. Galimas mašinos darbo vaizdo įrašas. Labai gera būklė. Paruošta darbui. Fpodpexyxaaofx Ab Seb

Sąlyga: labai geros būklės (naudotas), Keturių pusių obliavimo staklės Casadei C4 Darbinis plotis: 220 mm Darbinis aukštis: 120 mm Velenų skaičius: 4 Velenų išdėstymas: 1. Apatinis 2. Dešinysis 3. Kairysis Fpedpjxxiw Tjfx Ab Seb 4. Viršutinis Velenų greitis: 6000 aps./min. Veleno skersmuo: 40 mm Dvi padavimo greičiai: 6-12 m/min Įrankio dydis: 125-140 mm Padavimas sujungtas per kardaninę ašį Techninė dokumentacija

Sąlyga: naujas, Particularly long jointer tables (2250 mm) made from a single piece allow for easy straightening of workpieces. - Work tables are made of cast iron, stress-relieved and tension-free, making them highly resistant and permanently flat. - Simultaneous opening & closing of the jointer tables with a single locking mechanism. - High-performance industrial motor. - Fixed mounted extraction hood. - Robust steel/cast iron construction. - Large jointer fence 1200 x 150 mm (standard with auxiliary fence). Fedpocq E Uujfx Ab Sjpb - Material feed with four speeds via separate motor. - Thicknessing table is lifted on 4 robust columns protected by dust bellows. - Helical feed roller on thickness planer. - Rubber outfeed roller at the outlet of the thickness planer. - Preparation for slot mortising unit. - Digital display for thicknessing height position (1/10 mm). - Automatic star-delta switching. Technical data: Total table length: 2250 mm Working width: 520 mm Max. depth of cut: 5 mm Thicknessing table dimensions: 850 x 520 mm Min/max. working height: 3/240 mm Feed speeds: 5/8/12/18 m/min Cutter block diameter/cutting knives: 120 mm/with 4 HSS knives Speed: 5000 rpm Self-braking motor: 400 V/50 Hz/S6 – 40% 7.0 kW Extraction port diameter: 1 x 120 mm Weight: approx. 650 kg Including options: - “Teresa” cutter block Ø 120 mm, monoblock, with 4 quick-release knives - Additional auxiliary fence for thin workpieces - Motorized height adjustment of the thicknessing table with digital display - Thicknessing table with 2 swing-away idle rollers

Sąlyga: naudotas, Gamybos metai: 1992, su Centrofix – peilių velenas bepakopis padavimo reguliavimas 2 x ištraukiamosios velenos naudotas, geros būklės, aukštos komplektacijos Gamintojas Maka Modelis DH 630 A Metai 1992 Mašinos Nr. 9201891 GS – patikrintas dėl medienos dulkių Variklis 6,7 kW Obliavimo plotis apie 630 mm Obliavimo aukštis apie 300 mm Stalas su viena reguliuojama slankiąja voleliu Segmentinis spaudimo balkis Segmentinė padavimo volelis 2 plieninės ištraukiamosios voleliai Padavimo greitis 0–21 m/min, bepakopis Peilių kiekis 4 vnt. Centro-Fix keičiami peiliai Skaitmeninis obliavimo aukščio indikatorius Elektrinis aukščio reguliavimas su rankiniu tikslaus nustatymo ratu Ištraukimo jungties skersmuo 150 mm Fpodpfx Absxuv N Is Sjb Užimama vieta apie 1200 x 1200 x 1400 mm Svoris apie 1000 kg Sandėliavimo vieta: 97447 Gerolzhofen, laisvai pakraunama, be įpakavimo Perduodama esamoje apžiūrėtoje būklėje, be garantijos ar pretenzijų

Sąlyga: geras (naudotas), Four-side planer WEINIG type U17N 8 spindles Working width up to 170 mm Working height up to 120 mm Fodpfxsupkc Eo Ab Sopb Feed rate steplessly adjustable 6–36 m/min

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, obliavimo plotis: 630 mm, aukščio reguliavimo tipas: elektrinis, obliavimo aukštis: 300 mm, obliavimo peilių skaičius: 4, stalo ilgis: 1 200 mm, Įranga: variklio stabdis, Houfek storio obliavimo staklės A 630 Metai: 2025 Variklis: 7,5 kW (11 AG) Elektrinis stalo kėlimas Automatinis stalo nustatymas į nurodytą poziciją Paduodamojo stalo ilgis: 1200 mm Automatinis žvaigždės–trikampio variklio paleidimas Elektromagnetinis stabdis Besiskaidanti padavimo greičio reguliacija 4–19 m/min Segmentuotos spaudimo juostos įėjime, spaudimo juosta išėjime Padavimo voleliai: 1 kartotuotas įėjimo volelis + 2 plieniniai išėjimo voleliai Stalo tvirtinimas 4 taškais Min./maks. ruošinio storis: 3–300 mm Šioje mašinoje įrengtos šios parinktys: Fpodjx Hy Nlopfx Ab Ssb Segmentuotas rievėtas padavimo volelis Du guminiu sluoksniu dengti išėjimo padavimo voleliai Frezuojantis volas tipo „Tersa“ Obliuotas storio stalas 1200 mm Išėjimo stalo prailginimas 1200 mm

Sąlyga: labai geros būklės (naudotas), Obliavimo staklė Felder A951L Maks. obliavimo plotis: 510 mm, Stalo ilgis: 2700 mm Spiralinė velenas, Fedpfox Anviex Ab Sepb Rankinis įleidžiamojo stalo kėlimas su indikatoriumi 5,5 kW variklis, elektrinis stabdys Staklės labai geros būklės, vis dar su originaliais peiliais nuo naujos.

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, obliavimo plotis: 630 mm, aukščio reguliavimo tipas: elektrinis, stalo plotis: 630 mm, peilių skaičius: 102, Įranga: variklio stabdis, žemas triukšmo lygis, For sale is a HOFMANN AD 635 planer-thicknesser in high-quality industrial design. The machine features a HELIX spiral cutterhead (630 mm), a powerful 7.5 kW motor, and a programmable height adjustment control for the thicknessing table. Features / Highlights: + HELIX cutterhead, 630 mm – 102 carbide reversible knives + Very quiet operation, reduced vibration + Excellent planed surface finish + 7.5 kW motor (upgrade over standard) + Programmable thickness table control – sensor-monitored via photoelectric barrier + Electronic soft start and brake system Fpedpfxjx Ir N Te Ab Sob + Two feed speeds: 7 / 14 m/min + Thickness table guided on 4 support columns + Rubber-coated infeed and outfeed rollers + SUVAMATIC cutterhead guard + Integrated operating hours counter + Heavy-duty industrial construction Technical data: + Planing width: 630 mm + Cutterhead: HELIX, solid steel + Cutterhead speed: 5,800 rpm + Knives: 102 carbide reversible knives (37°) + Motor: 7.5 kW, 400 V / 50 Hz + Feed speed: 7 / 14 m/min + Extraction ports: 2 × Ø 160 mm Scope of delivery: + HOFMANN AD 635 planer-thicknesser + HELIX spiral cutterhead + SUVAMATIC safety guard + Programmable thickness table control + Operating manual (German) HOFMANN AD 635 Planer-Thicknesser | HELIX | 7.5 kW | Exhibition model Manufacturer: HOFMANN Maschinenfabrik GmbH – Made in Germany HOFMANN AD 635, planer-thicknesser, thicknesser, jointer, combination planer, HELIX cutterhead, spiral cutterhead, woodworking machine, joinery machine, cabinet shop machine, industrial planer, 630 mm planer Machine type: Planer-Thicknesser (Combination machine) Model: AD 635 Year of manufacture: 2025 Condition: New / Ex-demo machine Location: Haldensleben – Shipping from stock possible

Sąlyga: naujas, Working width (finished dimension) 23 – 180 mm Working height (finished dimension) 6 – 105 mm Min. length of individual workpiece 300 mm Feed speed 6 – 12 m/min Motor power horizontal spindles 2 x 7.5 kW Motor power vertical spindle 1 x 7.5 kW Spindle speed 6000 rpm Spindle diameter 35 mm Fpedpfxoiiv Dce Ab Seb Clamping length vertical spindles 120 mm Clamping length horizontal spindles 190 mm Manual lubricant pump Profile capacity without axial adjustment on vertical spindle 10 mm Loose roller integrated in outfeed table Extraction diameter 4 x 120 mm Including OPTIONS - Motor-driven feed roller before the jointer with lever for quick adjustment - Front vertical pressure unit before the left vertical spindle - Infeed table length 2300 mm - Tool package consisting of 4 planing heads and one edge-jointing cutter

Sąlyga: naudotas, AD medžio obliavimo staklės Holzprofi FS41N su visais priedais, labai geros būklės, su reversiniais peiliais, 2 greičiai ir padavimo greitis 6/12 m, 4 kW, stalo ilgis 1850 mm, stalo plotis 410 mm, 4 peiliai, apie 470 kg Fpsdpox H Uc Hsfx Ab Sob Kainos gali keistis, galimi klaidų, spausdinimo ir maketavimo netikslumai.

Gamybos metai: 2001, Sąlyga: labai geros būklės (naudotas), Vertical longitudinal pneumatic feeder for planer and drill, after overhaul, new electrical system Fpodpfx Abjvcac Se Ssb

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 230 mm, padavimo eiga Y ašimi: 140 mm, veleno greitis (min.): 6 000 aps./min, ekstrakcijos antgalio skersmuo: 140 mm, obliaus veleno skersmuo: 40 mm, ruošinio aukštis (maks.): 140 mm, suslėgto oro jungtis: 120 juosta, ruošinio plotis (maks.): 230 mm, įėjimo įtampa: 400 V, garantijos trukmė: 2 mėnesiai, ašies skaičius: 5, padavimo volo skersmuo: 140 mm, stalo plotis: 230 mm, peilio veleno skersmuo: 40 mm, Įranga: kabina, variklio stabdis, Four-side planer Weinig Unimat 500 Working width: 230mm Working height: 140mm Number of spindles: 5 Spindle arrangement: Bottom 5.5kW Right Left 7.5kW Top 11kW Bottom 5.5kW Fpodpfxjwv Slkj Ab Sjb Feed speed adjustable by inverter up to 30m/min Feed motor: 4kW Drive via cardan shafts Pneumatic pressure rollers 3 axes controlled from the control panel (width, height, pressure roller position) Air flotation table Infeed table length: 2470mm CE certificate Technical documentation (DTR)

Sąlyga: naudotas, Gamybos metai: 2014, Number of spindles: 5 units Working width: 230 mm Planing height: 120 mm Jointing table length: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min Control: Memory function Weinig Powermat 600 Compact ----- Machine is cleaned and fully inspected. Short Summary: ----- - 5 spindles - Powerful motors - Left and top spindle controlled for width and height Detailed Description: ----- Technical Data: Working width: 20-230 mm Working height: 10-120 mm Number of spindles: 5 1st spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool cutting circle: 125 - 145 mm Tool cutting circle rebate cutter: 130 - 160 mm Axial adjustment: 5 mm Rebate device MarathonCoatin for table insert before 1st lower tool holder Electronic digital display for radial adjustment 2nd spindle - right ----- Motor with brake: 11.0 kW Shared motor with left tool holder Spindle diameter: 40 mm Speed: 6,000 rpm Tool cutting circle 40 mm below table level: 93 - 200 mm Tool cutting circle 55 mm below table level: 93 - 180 mm Tool circle for straight knife cutterheads, max: 163 mm Max. tool diameter behind fence level: 180 mm Max. profiling depth: 35 mm Axial adjustment: 55 mm 3rd spindle - left ----- Motor with brake: Shared motor with 2nd spindle Spindle diameter: 40 mm Speed: 6,000 rpm Tool cutting circle 40 mm below table level: 93 - 200 mm Tool cutting circle 55 mm below table level: 93 - 180 mm Tool circle for straight knife cutterheads, max: 163 mm Max. profiling depth: 35 mm Axial adjustment: 55 mm Radial CNC-controlled spindle 4th spindle - top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool cutting circle: 93 - 200 mm Tool circle for straight knife cutterheads, max: 180 mm Max. profiling depth: 35 mm Axial adjustment: 40 mm Radial CNC-controlled spindle Split pressure shoe in front of upper tool holder, adjustable to tool cutting circle and swiveling away from tool, spring-loaded. Pressure shoe before and discharge after the upper spindle with electronic digital displays, integrated in the memory function or PowerCom. 5th spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool cutting circle: 93 - 200 mm Max. profiling depth: 15 mm Axial adjustment: 35 mm Feed system ----- Electronic feed, infinitely adjustable with brake: 4 kW, 5 - 30 m/min Feed roller before 1st lower tool is pneumatically controlled up/down. Durofer pointed tooth rollers with depth limiter and self-cleaning. Fodpfx Aowzmu Rjb Sopb Axial adjustment of feed rollers against left tool holder: 35 mm Machine electrics ----- Operating voltage: 400 V (voltage range 380 - 420 Volt), 50 Hz All spindles IE 2 version Electrical design according to DIN VDE 0113, electrical equipment for industrial machinery EN60204, IEC-204-1. Other electrical regulations not considered. Mach...

Sąlyga: geras (naudotas), Gamybos metai: 1981, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 91736, įėjimo įtampa: 380 V, įėjimo srovė: 99 A, ašies skaičius: 8, Das Gerät wurde zum Hobeln von Holzfensterrahmen verwendet. Das Gerät befindet sich in gutem Zustand. Der Preis für das Gerät ist vom Käufer zu unterbreiten. Der Käufer ist für Transport und Demontage verantwortlich. Fpjdpsu E Htgsfx Ab Ssb Bei weiteren Fragen zur Produktionseinrichtung kontaktieren Sie uns bitte.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2005, Multi-spindle moulder with 9 spindles and SCM Control 100 PC control for all spindles Max. working width: 240 mm Min. working width: 25 mm Max. working height: 120 mm Min. working height: 10 mm Minimum workpiece length: 640 mm Feed speed: 6 - 36 m/min, variable Spindle speed: 6000/8300 rpm Spindle diameter: 40 mm Usable length of vertical spindles: 140 mm Usable length of horizontal spindles: 250 mm Axial adjustment of vertical spindles relative to worktable: 0 - 80 mm Axial adjustment of horizontal spindles to the right guide: 0 - 45 mm Min. and max. diameter of profile tools: 100 - 220 mm Min. and max. diameter of tools on the planing spindle: 120 - 140 mm Profile capacity of the second lower horizontal spindle with tool Ø 200 mm = 15 mm Feed motor power: 5.5 kW Feed roller diameter: 140 mm Infeed table length: 2,500 mm Quick adjustment of infeed table and guide: 10 mm Extraction capacity: 7,500 m³/h Compressed air supply: 6 – 10 bar Weight: 6,000 kg Dimensions L x W x H = 6300 x 1620 x 1655 mm Fedpfx Absg Umrme Sjpb Spindle arrangement: Lower horizontal spindle: Motor power: 11.0 kW Spindle speed: 6,000 rpm Right vertical spindle: Motor power: 7.5 kW Spindle speed: 8,300 rpm Left vertical spindle: Motor power: 7.5 kW Spindle speed: 8,300 rpm 2nd right vertical spindle: Motor power: 7.5 kW Spindle speed: 8,300 rpm 2nd left vertical spindle: Motor power: 7.5 kW Spindle speed: 8,300 rpm Upper horizontal spindle: Motor power: 11.0 kW Spindle speed: 8,300 rpm 2nd lower horizontal spindle: Motor power: 12.0 kW Spindle speed: 8,300 rpm 2nd upper horizontal spindle: Motor power: 11.0 kW Spindle speed: 8,300 rpm 3rd lower horizontal spindle: Motor power: 7.5 kW Spindle speed: 8,300 rpm SET-UP quick adjustment system Worktables with fine adjustment of all units via Control 100 PC control Axial travel of vertical spindle 80 mm for large tool diameters Pneumatically operated full safety cabin Feed system with universal joint drive Infinitely variable feed speed Motorized height adjustment of feed system and spindles with independent control Segmented pressure shoes after the upper horizontal spindles Fine adjustment of outfeed table Pneumatic device for spindle locking in working position Automatically adjustable left vertical spindle Including ZIWO CL 15 automatic loader Note on used machinery: • Technical data and prior sale subject to change. • All prices quoted are ex-site – loaded free of charge! • The machines have been cleaned and functionally tested. • All machines are purchased as seen, without any warranty or guarantee. Buyers are welcome to inspect the machines at the site. • Special agreements are only valid in written form. (We will only respond to inquiries that include your address and telephone number!)

Sąlyga: naujas, Planer-thicknesser HOLZKRAFT FS 52es digital TERSA - Demonstration machine - TERSA cutterblock, electrical height adjustment, digital display for planing thickness ----- Technical Data ----- Planing width: 520 mm, Thicknessing table size: 850 x 520 mm, Fodpfju R Sztox Ab Sopb Table length: 2,250 mm, Max. stock removal: 5 mm, Cutterblock diameter: 120 mm, Number of knives: 4, Passage height: 240 mm, Min. workpiece thickness: 3 mm, Feed speed: 5 / 8 / 12 / 18 m/min, Spindle speed: 5,000 rpm, Extraction port diameter: 120 mm, Motor output (400 V): 9.5 HP / 7.0 kW, Weight: 695 kg - new demonstration machine -

Sąlyga: naujas, Obliavimo ir storinimo staklės HOLZKRAFT fs 30c TERSA - Parodinė mašina - Stalo atidarymas į galą, TERSA obliavimo velenas, įstrižai dantytas padavimo volelis ----- Techniniai duomenys ----- Obliavimo plotis: 300 mm, storinimo stalo matmenys: 565 x 300 mm, stalo ilgis: 1.510 mm, didž. medžiagos nuėmimas: 4 mm, veleno Ø: 72 mm, peilių kiekis: 3 vnt., Praėjimo aukštis: 230 mm, min. ruošinio storis: 3 mm, padavimo greitis: 7 m/min., sukimosi greitis: 5.200 aps./min., Fsdpfx Abeu R Sz Ts Sepb ištraukimo jungtis Ø: 2 x 120 mm, Variklio galia 400 V: 5,5 AG / 4 kW, Svoris: 270 kg - nauja parodinė mašina -

Sąlyga: naujas, Planer and Thicknesser HOLZKRAFT fs 41es TERSA - Demonstration Machine - ----- Technical Data ----- Planing width: 410 mm Thicknessing table dimensions: 775 x 410 mm Table length: 2,200 mm Max. cutting depth: 5 mm Cutterblock diameter: 95 mm Number of knives: 4 pcs Pass-through height: 240 mm Min. workpiece thickness: 3 mm Feed speed: 6 / 12 m/min Spindle speed: 5,000 rpm Extraction port diameter: 120 mm Fsdpfxou R S Aws Ab Sopb Motor power (400 V): 6.6 HP / 5.0 kW Weight: 450 kg - Special price - - new demo machine -

Sąlyga: naudotas, Storisavimo staklės SCM S 63 - naudotos - Segmentinė spaudimo sija, Volelis po stalu, Atskiras padavimo variklis ----- Techniniai duomenys ----- Obliavimo plotis: 630 mm, Peilių skaičius: 4 vnt., Prašalimo aukštis: 235 mm, Padavimo greitis: 6 /9/12/18 m/min., Ištraukimo antgalis Ø: 180 mm, Svoris: 1035 kg Fpedpfx Aboxm R Uvs Sob

Sąlyga: naujas, - Robust steel and cast iron construction - Large, ribbed surfacing tables made of cast iron - Smooth operation due to high dead weight - Four feed speeds - Motorized thickness table lift with two speeds and digital display - Segmented pressure bar at the infeed - Precision-mounted four-knife cutterblock - Helical-toothed steel infeed roller for especially uniform and gentle wood feed Fedpfx Abou T Hq Sj Sopb - Outfeed roller with rubber coating - Large surfacing fence, tiltable from 90° to +45° - Standard auxiliary fence included - Powerful industrial motor - Pneumatic quick-change system with pneumatic lifting and lowering of the surfacing table - The dust extraction connection remains in the same position for both surface planing and thicknessing, eliminating the need for additional hoses or inconvenient repositioning of the extraction system around the machine Manufacturer: SCM Group S.p.A. Via del Lavoro 1/3-Po box 168, 36016 Thiene-Vicenza, Italy Dimensions and Weights: - Length (product) approx.: 2300 mm - Width/depth (product) approx.: 1100 mm - Weight (net) approx.: 980 kg Surfacer: - Total table length: 2300 mm - Infeed table length: 1200 mm - Surfacing table width: 520 mm - Working height: 930 mm - Max. depth of cut, surfacer: 6 mm - Fence length: 1200 mm - Fence height: 190 mm - Fence tilt range: 90 – 45° Extraction Connection: - Extraction port diameter, thicknesser: 120 mm Installation Information: - Space requirement length: 2300 mm - Space requirement width/depth: 1610 mm - Explanation space requirement: The dimensions take into account maximum travel paths or usable lengths. - Machine body length: 1235 mm - Machine body width/depth: 850 mm - Working area length: 1000 mm - Working area width/depth: 3500 mm - Note on working area: Please add the specified dimensions to the space requirement to determine the recommended free installation area for the machine. Thicknesser: - Thickness table width: 520 mm - Working height min.: 3.5 mm - Working height max.: 250 mm - Max. depth of cut, thicknesser: 8 mm Electrical Data: - Drive motor output: 7 kW - Connection voltage: 400 V - Line frequency: 50 Hz Cutterblock: - Cutterblock type: TERSA - Cutterblock diameter: 120 mm - Number of knives: 4 pcs - Cutterblock speed: 5000 rpm - Max. planing width: 520 mm Feed: - Feed speed: 5/8/12/18 m/min

Sąlyga: naudotas, Keturių pusių obliavimo staklės WEINIG Quattromat 18 - naudota - Apverčiamų peilių sistema, Tepimo siurblys, Patikrinta nuo dulkių ----- Techniniai duomenys ----- Obliavimo plotis: 180 mm, Obliavimo aukštis: 120 mm, Velenų skaičius: 4, Padavimo greitis: 8 m/min., Ištraukimo jungtis Ø: 4x 120 mm, Matmenys (Ilg.xPlat.xAukšt.): 3.050x1.000x1.500 mm, Svoris: 1200 kg Fsdpfxexqd Ahs Ab Sjpb