Deckel Fp 4 A pirkti naudotą (683)

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 1987, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 by Heidenhain and Infinitely Variable Feed NEARLY NEW CONDITION Technical data: >> Year of manufacture: 1987 Machine No.: 2102-3536 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical quill and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Equipment and accessories: >> 3-axis digital readout Heidenhain TNC113 Nsdou R D I Sepfx Abzslc >> Centralized electric lubrication >> Machine lamp >> Coolant system >> Operating manual, spare parts list About the machine: Offered is a Universal Milling Machine Deckel FP1, year 1987, in like-new original condition. The machine shows minimal backlash and all spindles move smoothly. Even at maximum speeds, the milling machine runs very quietly. This modern FP1 model features infinitely variable feed in three axes and also rapid traverse in these axes. A major advantage is the active 3-axis digital display. With this Heidenhain distance control, you can enter positions that the machine approaches automatically. The FP1 was located in a training workshop where it was only used occasionally. An oil change has been performed. The machine has been mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this exceptional machine on site under power.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1987, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP4M with 3-Axis Heidenhain Digital Readout, special paint finish in Light Grey, CE compliant! Technical Data: >> Year of manufacture: 1987, Machine No. 2203-2790 >> Fixed angle table (newly scraped) >> Speed range: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head can be moved 150 mm on spindle carrier >> Vertical and horizontal quill - ISO 40 taper >> Vertical quill extension: 90 mm >> Drawbar system: M16 >> Weight: approx. 1500 kg Accessories and Equipment: >> 3-axis Heidenhain digital readout Nodpfx Aoxctyaobzolc >> Coolant system >> Chip tray >> Central lubrication system About the Machine: Offered is a Universal Milling Machine Deckel FP4M, CE compliant, in very good condition. The machine is partially overhauled, features minimal backlash, and all axes move smoothly and evenly. The milling machine runs smoothly even at maximum speeds. Rapid traverse in all axes, all bellows have been replaced. The fixed angle table has been newly scraped. This is a reliable and user-friendly machine. Oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout facilitates and further increases the precision of milling tasks. Take the opportunity to inspect and test the machine under power at our facility.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, F729 Universal Milling Machine Deckel FP1 with 3-axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed Very Good CONDITION Technical Data: >> Year of manufacture: 1992 Machine number: 2102-6289 >> Rigid angle table (newly planed) >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel distances X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable by 100mm on spindle carrier >> Vertical quill and horizontal quill - SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: Nsdpju T D Nrefx Abzelc >> 3-axis digital readout Heidenhain TNC113 >> Coolant system >> Operating manual, spare parts list About the machine: Offered here is a universal milling machine Deckel FP1, year 1992, in very good condition. The machine has minimal backlash and all lead screws move smoothly. Even at maximum speeds, the milling machine runs very quietly. This newer FP1 model features infinitely variable feed on all three axes, and also includes rapid traverse on these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain path control, dimensions can be entered which the machine then automatically moves to. The FP1 was used in a training workshop, where it was used only occasionally. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital readout system makes operation easier and more precise. Take advantage of the opportunity to inspect and test this machine on site under power.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, F736 Universal Milling Machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 retrofit carried out by FA Huttelmaier In very good condition Nledpfxeu Nvwvs Abzsc Technical Data: >> Year of manufacture: 1985 Machine No.: 2102-2891 >> Rigid angle table >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head transversely adjustable on spindle carrier by 100 mm >> Vertical and horizontal quill - SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC111 >> Coolant system >> Operating manual, spare parts plan About the Machine: Offered is a Universal Milling Machine Deckel FP1, year of manufacture 1985, in very good condition. The FP1 received an overhaul at Huttelmaier in 2008. The machine has minimal backlash and all lead screws operate smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. On this later FP1 model, the feed is infinitely variable in all three axes, and rapid traverse is also available in these axes. A significant benefit is the active 3-axis digital readout system. With this Heidenhain distance control, you can enter dimensions, which the machine then approaches automatically. The FP1 was located in a training workshop, where it was only used occasionally. Oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test this prime example under power on site.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1983, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP1 with 3-Axis K&C New Digital Readout and Infinitely Variable Feed on 3 Axes – Excellent CONDITION Technical Data: - Year of manufacture: 1983 - Machine No.: 2102-2444 - Fixed angle table - Spindle speed: 40 – 2000 rpm - Infinitely variable feed on 3 axes - Rapid traverse on 3 axes - Drive power: 1.5 / 1.9 kW - Spindle brake - Travel distances X/Y/Z: 300/160/340 mm - Vertical milling head adjustable on column by 100 mm - Vertical and horizontal quill – SK40 - Drawbar system S20x2 - Weight approx. 800 kg Accessories and Equipment: - 3-axis digital display K&C newly fitted with manufacturer’s warranty and operating instructions. Display unit: Setting reference points, zero points, input of coordinates, mm/inch conversion, absolute or incremental coordinates, circle functions, hole array, radius milling functions, etc. - Coolant system Nljdpfetwlwzsx Abzec - Operating manual, spare parts list About the Machine: Offered here is a Deckel FP1 universal milling machine, year 1983, in outstanding condition. The machine shows minimal backlash and all lead screws move smoothly. Even at maximum speeds the milling machine runs very quietly. On this newer FP1 model, the feed can be steplessly regulated on all three axes, and rapid traverse is also available on these axes. The FP1 was located in a training workshop and was only used intermittently. An oil change has been performed. The machine has been mechanically and electrically tested. The new K&C digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this gem under power on site.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Universal Milling Machine Deckel FP1 with 3-Axis Digital Readout RSF 2006, Fully Refurbished, TOP Condition Technical Data: >> Machine No. 53819/08 >> Fixed Angle Table >> Spindle Speed: 40 - 2000 rpm Nlsdpfx Aevb Ud Uobzoc >> Feed on 2 Axes >> Motor Power: 1 / 1.5 kW >> Travels X/Y/Z: 300/150/340 mm >> Vertical and Horizontal Quill - ISO 40 taper >> Spindle Brake >> Drawbar System S20x2 >> Weight approx. 700 kg Accessories and Equipment: >> 3-axis digital readout by RSF Elektronik >> Coolant device >> Machine leveling feet About the Machine: Offered is a Deckel FP1 universal milling machine in very good condition. The Deckel has minimal backlash and all spindles move smoothly. An oil change has been performed. The FP1 was completely overhauled by Huttelmaier in 2006 and has seen very little use since. The RSF digital readout makes work easier and even more precise. Take the opportunity to inspect and test this machine onsite under power.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1984, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed – Excellent CONDITION Technical Data: Nodpfx Absu Racrszslc >> Year of manufacture: 1984 Machine No. 2102-2601 >> Swivel-tilting rotary table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be shifted 100 mm on spindle carrier >> Vertical quill and horizontal quill – ISO 40 (SK40) >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Coolant system >> Operating manual, spare parts diagram About the machine: For sale is a Universal Milling Machine Deckel FP1, year 1984, in excellent condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. On this later FP1 model, the feed in all three axes is infinitely adjustable, and the machine is also equipped with rapid traverse on these axes. The active 3-axis digital readout is a significant advantage. With this Heidenhain path control, you can input dimensions to which the machine will automatically move. The FP1 was located in a training workshop where it was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes working easier and even more precise. You are welcome to inspect and test this machine under power on site.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1985, Funkcionalumas: visiškai funkcionalus, Universal milling machine Deckel FP1 with 3-axis digital readout K&C (new) and infinitely variable feed on 3 axes – Excellent condition Technical Data: >> Year of manufacture: 1985 >> Machine no.: 2102-2867 >> Swiveling-tilting rotary table (newly ground) >> Spindle speeds: 40 – 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable by 100 mm on spindle carrier >> Vertical quill and horizontal quill – SK40 taper >> Clamping system: M16 >> Weight approx. 800 kg Nlodpfxjt Aarpo Abzsc Accessories and Equipment: >> 3-axis digital readout K+C, newly installed, with manufacturer’s warranty and operation manual. Display functions: set reference and zero points, enter coordinates, mm/inch switch, absolute or incremental mode, circle functions, hole patterns, radius milling functions, etc. >> Coolant device >> Operator’s manual, spare parts list About the machine: For sale is a Deckel FP1 universal milling machine, year 1985, in excellent condition. The machine has minimal backlash and all axes move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed is infinitely variable on all three axes, plus there is rapid traverse in all axes. Oil change has been performed. Mechanically and electrically inspected. The new digital readout by K&C makes operation easier and even more precise. You are welcome to inspect and test the machine under power at our site.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Universal Milling Machine Deckel FP4MK with 3-axis 'Aktiv' Heidenhain digital readout in light grey, very good condition, CE compliant! Technical Data: >> Year of manufacture: 1992 Machine No.: 2203-8489 >> Fixed angular table >> Speed range: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel (X/Y/Z): 500/400/400 mm >> Vertical milling head traversable on spindle support Njdpfx Abew Evq Ajzslc >> Vertical and horizontal quill - SK40 >> Vertical quill extendable by 90 mm >> Hydraulic clamping system >> Weight approx. 1600 kg Equipment and Accessories: >> 3-axis Heidenhain 'Aktiv' digital readout >> Coolant system >> Chip tray >> Electric central lubrication >> Operation manual, spare parts diagrams About the machine: Offered here is a Deckel FP4M 'Aktiv' universal milling machine in very good condition, CE compliant. The machine has minimal backlash and all feeds operate smoothly. Even at maximum spindle speeds, the milling machine operates quietly. The machine is equipped with hydraulic clamping. On this newer FP4 model, feed on all three axes is steplessly adjustable, and there is rapid traverse on each axis. A significant advantage is the active 3-axis digital readout. With this Heidenhain travel control, you can enter dimensions and the machine will automatically move to the set positions. An oil change has been carried out. The machine has been mechanically and electrically checked. The Heidenhain digital readout makes operation easier and more precise. Take advantage of the opportunity to inspect and test this machine under power at our site.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1984, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 300 mm, Y ašies eiga: 150 mm, Z ašies eigos atstumas: 340 mm, plunksnos brūkšnys: 80 mm, veleno greitis (maks.): 2 000 aps./min, veleno greitis (min.): 40 aps./min, stalo ilgis: 210 mm, stalo plotis: 600 mm, bendras aukštis: 1 750 mm, bendras ilgis: 1 400 mm, bendras plotis: 1 600 mm, sukimosi greitis (maks.): 2 000 aps./min, sukimosi greitis (min.): 40 aps./min, bendras svoris: 850 kg, stalo apkrova: 200 kg, garantijos trukmė: 3 mėnesiai, Mašina buvo mūsų dirbtuvėse pilnai / iš dalies perrinkta 2026 m., šiuo metu yra puikios būklės. Dalinio kapitalinio remonto metu sumontuotas naujas stabdžio variklis. Nlsdpfxjyi Amws Abzoc Valdymas 3 ašių - aktyvus - skaitmeninis indikatorius HEIDENHAIN TNC 113 Sukimosi greitis 40-2000 aps./min., geometriškai sudėliota tiesioginė transmisija su 18 sukimosi greičių pakopų – didžiausias sukimo momentas / frezavimo našumas Pasiūla 5–500 mm/min, be pakopų reguliuojamas Greitas poslinkis 1,2 m/min Pinolė Ištraukiama vertikali pinolė 80 mm SK40 su M16 sriegiu įtraukai, pasirinktinai: DECKEL pjūklo sriegis S20 x 2 Ištraukiama horizontali pinolė apie 100 mm Ašys X/Y/Z 300/150/340 mm Stalas Standus kampinis stalas 600x210 mm Didžiausia stalviršio apkrova 200 kg Įranga • Vertikali ir horizontali velenas • Rankiniu būdu pasukamas frezavimo galvutė +/- 90 ° • Z ašies gofruota apsauga Pasirinkimai • Drožlių padėklas • Mašinos apšvietimas • Universalus stalas • Apvalus stalas • Štampavimo galvutė • Dalijimo įrenginys • Priešpriešinis laikiklis • ir kt.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1988, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 500 mm, Y ašies eiga: 400 mm, Z ašies eigos atstumas: 400 mm, veleno greitis (maks.): 2 500 aps./min, veleno greitis (min.): 50 aps./min, plunksnos brūkšnys: 60 mm, bendras aukštis: 1 935 mm, bendras ilgis: 2 000 mm, bendras plotis: 200 mm, sukimosi greitis (maks.): 2 500 aps./min, sukimosi greitis (min.): 50 aps./min, įvesties srovės tipas: trifazis, bendras svoris: 1 445 kg, stalo ilgis: 460 mm, ruošinio svoris (maks.): 400 kg, stalo apkrova: 400 kg, stalo plotis: 800 mm, paskutinio kapitalinio remonto metai: 2013, garantijos trukmė: 6 mėnesiai, Mašina buvo visiškai profesionaliai ir kokybiškai kapitališkai atnaujinta mūsų įmonėje 2013 m. Mašiną grąžinome atgal iš kliento, kuris ja naudojosi labai mažai, ir atlikome pilną generalinę techninę priežiūrą bei patikrinimą. Valdymas 3 ašys – aktyvus – skaitmeninis ekranas HEIDENHAIN TNC 113 Sūkių dažnis 50–2500 aps./min, geometriškai suskirstyta tiesioginės pavaros transmisija su 18 greičio pakopų, užtikrinančių maksimalų sukimo momentą / frezavimo našumą Prailginimas 6,3–630 mm/min, bepakopė reguliacija Greitas perėjimas 1,3 m/min Pinolė Ištraukiama vertikali pinolė 60 mm, su SK40 ir M16 užsukimo sriegiu, papildomai: su DECKEL pjūklo sriegiu S20 x 2 Njdpeyitxqjfx Abzslc Ištraukiama horizontali pinolė apie 100 mm Ašys X/Y/Z 500/400/400 mm Stalas Tvirtas kampinis stalas 800x460 mm Komplektacija • Vertikali ir horizontali galvutė • Frezavimo galvutė rankiniu būdu pasukama +/- 90 ° • Centrinis tepimas Pasirinktinai • Z ašies apsauginė armonika • Drožlių lovys • Mašininis apšvietimas • Universalus stalas • Apvalus stalas • Plaktuko galvutė • Padalijimo įrenginys • Atrama • ir kt.

Būklė: naujas, Gamybos metai: 2026, Completely overhauled, as-new machine, upgraded to the legally required safety standard "state of the art" according to the Occupational Safety Regulation of the trade associations. Control cabinet electronics Installation of a new CE control cabinet in accordance with the current statutory regulations of the trade associations BGVA 3 / DIN-EN 60204-1, new machine standard. Optional: complete machine in CE version. A CE Declaration of Conformity will be issued for the machine. This means FPS Werkzeugmaschinen GmbH assumes the role of manufacturer. The machine therefore fulfills the requirements of the Occupational Safety Regulation (BetrSichV). The year of manufacture thus corresponds to the machine’s delivery date. EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1 Control 3-axis FPS Aktiv digital readout Speed 50 – 2,500 rpm, geometrically stepped direct-drive transmission with 18 speed settings for maximum torque / milling performance Feed 6.3 to 630 mm/min, steplessly adjustable Rapid traverse 1.3 m/min Quill Extendable quill, vertical 60 mm, SK40 with M16 drawbar thread optional: with DECKEL saw thread S20 x 2 Extendable quill, horizontal approx. 100 mm Axes X/Y/Z: 500/400/400 mm Table Rigid angle table, 800x460 mm Equipment • Vertical and horizontal spindle • Milling head manually tiltable +/- 90 ° Options • Z-axis bellows • Chip tray Nledpfx Abjh R S Tcjzjc • Machine lamp • Central lubrication • Universal table • Rotary table • Shaping head • Dividing head • Counter support • etc.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1989, Dear Sir or Madam, For sale is a partially refurbished Deckel FP1 milling machine with 3-axis Heidenhain TNC113 active control, notable for its user-friendly operation. This newer model, manufactured in 1989, features central lubrication, an electric coolant pump, and a machine lamp. The machine has been extensively partially overhauled in our workshop and is therefore in excellent condition. You are welcome to inspect it on site. Delivery time: on request Machine no.: 2102-xxxx Table: fixed angle table or rotary/swivel tilting table Travel paths: X300mm / Y160mm / Z340mm Quill stroke: 60mm Connected load: 1.9KW Number of spindle speeds: 16 Speed range: 40–2000 rpm Tool taper: SK40 Nlsdpfxopy Eldo Abzoc Feed: infinitely variable 5–500 mm/min Rapid traverse: 1200 mm/min Equipment and accessories: 3-axis Heidenhain TNC113 digital readout with active control, stepless feed regulation on all 3 axes, coolant system, central lubrication, technical documentation, leveling feet, safety equipment (optional) Our service commitment to you: - We are a certified master workshop specializing in mechanical engineering. - All machines undergo thorough inspection. - All lubricants and, if necessary, worn parts are replaced beforehand. - On request, we can provide a complete or partial overhaul of the selected machine. - You can order additional accessories such as tools, etc., directly with your purchase. - On request, additional features such as safety equipment can be supplied and installed. - We are happy to arrange shipping and/or machine installation for you.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1986, Dear Sir or Madam, We hereby offer you well-maintained milling machines of the Deckel FP4M type. Each machine is at least technically inspected in our workshop and is therefore fully operational. We look forward to your inquiry! Nsdelrw Tijpfx Abzjlc Delivery time: on request Machine no.: xxxx-xxxx Year of manufacture: xxxx Table type: fixed Spindle speed: 50 – 2500 rpm Feed rate: 8 – 630 mm/min Rapid traverse: 1300 mm/min Drive power: 3.7 kW / 4.4 kW Rapid traverse: 1300 mm/min Travel (X/Y/Z): 500/400/400 mm Tool holder: SK40 Drawbar system: M16 Vertical quill stroke: 90 mm Weight: approx. 1.6 t Additional equipment and accessories: on request Our service promise to you: - We are a certified master workshop in the field of mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced in advance - Upon request, we can completely or partially overhaul your selected machine - You are free to choose the paint color of your selected machine - On request, you can order additional accessories such as tools directly - If required, we can also install further accessories such as safety devices, etc. - We are happy to handle shipping and/or installation for you

Būklė: geras (naudotas), Parduodama iš dalies restauruota frezavimo staklė DECKEL FP1 aktiv su 3 ašių Heidenhain skaitmenine indikacija TNC 113 ir dalijimo stalu su trijų žandikaulių griebtuvu. Nledpjxmggusfx Abzjc Dėl kompaktiškos konstrukcijos puikiai tinka mažai hobių dirbtuvei ar garažui. Gamintojas: DECKEL Tipas: FP1 Staklių Nr.: 2102-3314 - Eiga X/Y/Z 300x160x340 mm - Sukimosi greičio diapazonas 40–2000 aps./min - Trys ašys be pakopų reguliuojamu poslinkiu - Greitas poslinkis visose trijose ašyse - Vertikalioji frezavimo galva - 100 mm horizontali eiga - vertikaliai - Horizontalioji frezavimo įranga - 3 ašių Heidenhain skaitmeninis indikatorius TNC113 - Aušinimo sistema - Dalijimo stalas su trijų žandikaulių griebtuvu Bendra galia: 1,9 kW Staklių matmenys (I x P x A): 1,30 x 1,10 x 1,60 m Svoris: apie 850 kg Kaina nurodyta be PVM, atsiėmimas iš sandėlio. Būklė: naudota.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1995, Iš karto laisva vietoje: CNC įrankių frezavimo staklės Deckel Tipas FP 5 – 80 Metai: 1995 Njdpozg Throfx Abzslc CNC valdymas Dialog 12 Universalus stalas 750 x 520 mm X / Y / Z važiavimo keliai 800 / 550 / 500 mm Variklio galia 9 kW Pinolės eiga 80 mm Elektroninis rankenėlis Ašies sukimosi greitis 32 – 5000 aps./min Padavimo greitis 0 – 6000 mm/min Svoris 4,5 t Kaina 2.750 EUR + PVM, vietoje.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, Techniniai duomenys Nljdjzg U Dbopfx Abzsc x eiga 300 mm y eiga 160 mm z eiga 290 mm Stalo matmenys 600 x 210 mm Įrankio laikiklis SK 40 Veleno apsūkų diapazonas (16) 40 - 2000 aps./min Begaliniai padavimai 5 - 500 mm/min Greitas padavimas 1,2 m/min Veleno pavara 1,5 / 1,9 kW Bendras galios poreikis 9,5 kVA Staklių svoris apie 830 kg Reikalinga vieta apie 2000 x 2200 x 1655 mm Papildoma informacija Staklės labai geros būklės, atvežtos iš mokymo dirbtuvių. Komplektacija: * 3 ašių pozicionavimo valdymas su aktyviu skaitmeniniu ekranu Heidenhain TNC 123 - Rankinis režimas: valdymas rankiniu būdu ir pozicionavimas su rankiniu įvedimu - Automatinis režimas: atskirų eilučių programavimas, programų įrašymas * Fiksuotas kampinis stalas * Perstumiama vertikali frezavimo galva, posvyrio kampas +/- 90°, pinolės eiga 60 mm * Aušinimo skysčio įranga * Centrinis tepimas * Atrama su priešingu guoliu * Antivibracinės kojos * Dokumentacija

Būklė: labai geros būklės (naudotas), NETTO KAINA 9.500€ DECKEL universali frezavimo staklė FP 1 Nr. 2101 su HEIDENHAIN 2 ašių skaitmeniniu indikatoriumi Darbo eiga: X/Y/Z: 300 x 160 x 340 mm Rankinis frezgalvio svirties reguliavimas: 100 mm Darbo zonos padidinimas iki: 300 x 260 mm Verpstės sūkių dažnis vertikaliai/horizontaliai: 40 – 2.000 aps./min. Pavarų skaičius: 16 Verpstės kūgis: SK 40 Įrankio tvirtinimas: S20 x 2 (Deckel standarto) Pinolės eiga: 60 mm Pjovimo padavimas X/Z ašyje: 5 – 500 mm/min Padavimo reguliavimas: be laiptelių Greitasis judesys X/Z ašyje: 1200 mm/min. Padavimas Y ašyje: rankinis Fiksuotas kampinis stalas: 600 x 210 mm Vertikalus galvos pasukimas: +/- 90 laipsnių Svoris: 710 kg Matmenys: apie 1250 x 1200 x 1850 mm Techniniai duomenys nesaistomi! Nedpsxyc N Ejfx Abzslc Ypatybės: - Horizontaliam apdirbimui frezgalvis pasukamas 90 laipsnių kampu ir nustumiamas atgal. - 2 ašių precizinis skaitmeninis indikavimas HEIDENHAIN POSITIP VRZ 719 - Be laiptelių padavimas X/Z ašyse - Prieš keletą metų dalinai atnaujinta specializuotos įmonės Komplektacija: - 2 ašių HEIDENHAIN skaitmeninis indikatoriaus - Fiksuotas kampinis stalas - Drožlių vonia - Staklių apšvietimas - Kojelės Papildoma įranga pagal užklausą! Būklė: gera – labai gera, iš mokymo įstaigos. Verpstės laisvės judesiai: X 0,05 mm Y 0,15 mm Z 0,2 mm Nauji įrenginiai – kiekvieną savaitę. Užsiprenumeruokite profilį ir nepraleiskite naujienų!

Būklė: geras (naudotas), Gamybos metai: 1995, 1 naudotas universalus įrankių frezavimo staklės Gamintojas: Deckel Maho Tipas: FP 1 Metai: 1995 m., su CE sertifikatu Nodpfxszamw Is Abzolc Su aktyvia skaitmenine indikacija Heidenhain TNC 123 Techniniai duomenys: x eiga: 300 mm y eiga: 160 mm z eiga: 340 mm Veleno tvirtinimas: SK 40 Stalo dydis: 600x210 mm Veleno apsisukimai: 40–2000 aps./min Staklių svoris approx.: 1 t Reikalinga vieta approx.: 1,6x1,3x1,8 m

Būklė: geras (naudotas), 1 used universal tool milling machine Manufacturer: Deckel Model: FP 1 Year of manufacture: 1982 Technical specifications: X-travel: 300 mm Y-travel: 160 mm Z-travel: 340 mm Spindle taper: SK 40 Table size: 600 x 210 mm Spindle speeds: 40–2,000 rpm Nlodpfx Aorn I Rzjbzsc Machine weight approx.: 1 t Space requirement approx.: 1.6 x 1.3 x 1.8 m

Būklė: naudotas, X eiga 500 mm y eiga 200 mm z eiga 400 mm Stalo tvirtinimo paviršius 700 x 300 mm Įrankio tvirtinimas SK 40 - S20 Pavaros eiga 8–400 mm/min Nlsdpfjx Hay Dsx Abzoc Greita eiga X ir Z ašyse 1200 mm/min Sūkių dažnis 40–2000 aps./min Bendras galios poreikis 2,2 kW Mašinos svoris apie 1400 kg Užimama vieta apie 1500 x 1200 x 1600 mm Įskaitant 2 ašių Heidenhain skaitmeninį indikatorių

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Vidinis prekės Nr.: 26071 Universali frezavimo staklės Deckel FP1 + Heidenhain skaitmeninis indikatorius Važiavimo keliai: X300 / Y160 / Z340 mm Pinolės eiga: 60 mm Jungiamoji galia: 1,9 kW Velena apsukų skaičius: 16 Apsukų diapazonas: 40–2000 aps./min Įrankio tvirtinimas: SK40 Staklės iš švietimo įstaigos, gerai prižiūrėtos būklės. Njdpfjzd Thmjx Abzjlc Mašiną galite apžiūrėti prijungtą prie elektros daugiau nei 500 m² šildomoje sandėlio patalpoje.

Būklė: dilaminuotas dirbtuvėje (naudotas), Įrankių frezavimo staklės: Deckel Tipas: FP 2 Būklė: Geometriškai atnaujinta, naudota Gamybos metai: 1980-ieji, 2026 m. geometrijos atnaujinimas Techniniai duomenys: Eigos X/Y/Z, apie: 400 / 200 / 400 mm Įrankio laikiklis: S20 Sukimosi greičiai: (18) 40 - 2000 min⁻¹ Nsdozcdarjpfx Abzjlc Pado poslinkiai: (18) 8 - 400 mm/min Galva sukiojama: 180° Įranga: - Naujas 3 ašių skaitmeninis indikatorius - Naujas veleno apsauga su galiniu jungikliu - Nauja staklių lempa - Horizontalus ir vertikalus velenas - Fiksuotas kampinis stalas - Aušinimo įranga - Drožlių dėklas

Būklė: naudotas, x eiga 800 mm y eiga 600 mm z eiga 550 mm Valdymas Deckel Dialog 11 Mūsų vertinimu, įrenginys yra geros naudotos būklės ir gali būti apžiūrėtas įjungtas susitarus dėl laiko. Nljdpfx Abjy Ty Nfjzoc Priedai, paveikslėlyje matomi įrankiai ir spaustuvai į pristatymo apimtį įtraukti tik tuomet, jei tai nurodyta papildomoje informacijoje. Techninių duomenų ir informacijos pakeitimai arba klaidos, taip pat tarpinis pardavimas galimi!

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Deckel FP 1, gamybos metai apie 1983 / renovuotas Arnold įmonėje apie 2012 3 ašių skaitmeninis indikatorius, Eigos ilgis X/Y/Z 400/150/340 mm, Stalo dydis 600 x 210 mm, T formos grioveliai: 4 T-griovelio plotis: 12 mm Veleno sūkių skaičius: 20 - 2000 aps./min Darbinio veleno sukimosi greičio pakopos: 12 Paviršinio padavimo pakopos: 10 Veleno tvirtinimas: MK 4 Vertikalus pinolės eigos ilgis: 60 mm Staklių svoris apie: 0,8 t Nledpszfglhofx Abzec