Deckel Fp 2 pirkti naudotą (688)

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 1988, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2801 002016, X ašies eiga: 300 mm, Y ašies eiga: 300 mm, Z ašies eigos atstumas: 400 mm, veleno greitis (maks.): 6 300 aps./min, veleno greitis (min.): 31 aps./min, plunksnos brūkšnys: 80 mm, greitas poslinkis X ašimi: 4 m/min, greitas poslinkis Y ašis: 4 m/min, greitasis eiga Z ašyje: 4 m/min, stalo plotis: 620 mm, stalo ilgis: 390 mm, stalo apkrova: 250 kg, bendras svoris: 1 700 kg, reikalingas plotis: 1 800 mm, vietos reikalavimas ilgis: 1 400 mm, reikalingas aukštis: 1 800 mm, įėjimo dažnis: 50 Hz, Įranga: dokumentacija / vadovas, The machine is extremely stable and robust in terms of its design and construction. Its high level of accessibility makes it exceptionally user-friendly. The machine can also be moved manually using mechanical handwheels. CNC Path Control DECKEL Dialog 4 Easily programmable 3D path control system with color graphical support, dialog-guided cycle entry, contour path calculator, editor functions, clear program and tool management, and the possibility of parallel programming. Travel paths X / Y / Z: 300 / 300 / 400 mm Tool holder: SK40 DIN 69872 Clamping system: Hydromechanical clamping system SK40 with pull studs DIN 2080 or DIN 69872 Work spindle: vertical and horizontal. Manually extendable quill, vertical 80 mm and horizontal 65 mm. Milling head can be manually swiveled +/- 90 ° Speed range 31.5-6300 rpm, geometrically stepped direct transmission for maximum torque/milling performance at the work spindle. Iodpfsywhvhsx Abvsat Direct transmission for maximum torque/milling performance at the work spindle Feed rate 2 - 3600 mm/min, infinitely variable feed Rapid traverse 4000 mm/min Swiveling table 620 x 390 mm, max. load 450 kg

Būklė: naudotas, Gamybos metai: 1987, - Deckel Contour 3 CNC control - Movable vertical milling head with extendable spindle - Counter bearing for long milling arbors - Hydraulic tool clamping system - Automatic speed-change gearbox - Automatic clamping in X/Y/Z axes - Automatic central lubrication - Coolant system - Direct path measurement - Collision protection coupling in Z/Y axes - Year of manufacture: 1987 Technical Data Working Range: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Vertical quill stroke: 80 mm - Vertical milling head adjustable on spindle housing: 150 mm Main Drive: - Motor: Pole-changing three-phase brake motor and gearbox with forward/reverse operation - Power: 3.7 / 4.4 kW Iedpfju Awlzjx Abvoat - 18 spindle speeds: 50 - 2500 rpm - Step increment: 1.25 - Tool holder: SK40 (M16) - Tool clamping: Hydraulic Feed Drive: - X-axis: 1 DC motor - Y and Z axes: 1 DC motor - All axes: Ball screw spindles - Programmable feed speed: 10 - 1000 mm/min - Rapid traverse X/Y/Z-axis: 2000 mm/min Universal Table: - Number of T-slots: 7 - T-slot width: 14/H7 mm - T-slot spacing: 63 mm - Center bore diameter/depth: 63H6 / 8 mm - Distance table center to mounting surface: 260 mm - Max. vertical clearance (vertical milling spindle/table surface): 490 mm - Permissible load: 300 kg - Weight: 230 kg - Rotation range in horizontal position (C axis): 360° - Tilt range (A axis): +450 / -150° - Swivel range (B axis): ± 450° - Measuring range with direct digital readout: Resolution 360,000 x 0.001° - Reduction ratios: 60:1 / 120:1 / 240:1 Installation: - Required floor space with safety area: approx. 2.3 x 2.5 m - Operating voltage: 400 V / 50 Hz - Total connected load: 7.5 kW / 9.5 kVA - Machine weight: approx. 1830 kg - Floor loading: 3000 kg/m²

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1988, - Completely overhauled in 2022 - Heidenhain TNC320 CNC control system - CNC or manual operation possible - Movable vertical milling head with extendable spindle - Counter support for long milling arbors - Hydraulic tool clamping - Automatic gear transmission - Automatic clamping on X, Y, and Z axes - Automatic central lubrication - Coolant system - Direct position measuring - Collision protection coupling on the Y and Z axes - Year of manufacture: 1988 - Includes tool holders, drilling/milling tools & tool cart Specifications Working area: - X-axis (longitudinal): 485 mm - Y-axis (cross): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head manually adjustable on spindle headstock: 150 mm Main drive: - Pole-changing three-phase brake motor: gearbox with forward/reverse operation - Power: 3.7 / 4.4 kW - Working spindle speeds: 63 - 3150 rpm (18 steps) - Step increment: 1.25 - Tool holder: SK40 (M16) - Tool clamping: disc spring pack - Tool release: hydraulic Feed drive: Isdpfx Abswhk Ubevsat - X-axis: 1 DC motor - Y & Z axes: 1 DC motor - Ball screws: all axes - Feed rate: 2 - 3000 mm/min (programmable) - Rapid traverse X/Y/Z axis: 3000 mm/min Table slide: - Number of T-slots: 4 - T-slot width: 14H7 mm - T-slot spacing: 63 mm - Permissible load: approx. 600 kg Installation: - Required space (including safety area): approx. 2300 x 2500 mm - Machine weight incl. vertical milling head and angle table: approx. 1830 kg - Operating voltage: 400 V - Total connected load: 12.5 kVA - Floor loading: 3000 kg/m²

Gamybos metai: 1990, būklė: geras (naudotas), Various collets and holders, approx. 300 pieces. For DECKEL milling machines FP1 - FP2 - FP3 - FP4. Individual sale upon request. Iodpfx Aehvz Iisbvsat

Būklė: geras (naudotas), Gamybos metai: 1964, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 500 mm, Y ašies eiga: 200 mm, Z ašies eigos atstumas: 400 mm, veleno greitis (maks.): 200 aps./min, veleno greitis (min.): 40 aps./min, įėjimo dažnis: 50 Hz, The machine is in good condition! Tool holder: SK 40 Ijdsilg H Eepfx Abvsat Travel distances X/Y/Z: 500 / 200 / 400 mm Speed range: (18 steps) 40 - 2000 rpm Vertical quill stroke: 60 mm Horizontal quill stroke: 100 mm Feeds: 8 - 400 mm/rev Table size: 700 x 300 mm Motor power: 2.2 kW Connection: 400 V / 16 A plug Weight: approx. 1300 kg Space requirement LxWxH, approx.: 1200 x 1250 x 1670 mm Head swivels: 90° / 90° Equipment: - 3-axis digital readout - Coolant system We would be pleased to demonstrate the machine under power at our premises. All information is provided without guarantee. Subject to prior sale. The item is sold with the exclusion of any warranty. This exclusion does not apply to damages resulting from grossly negligent or intentional breach of obligations by the seller, or to any injuries to life, body, or health.

Būklė: geras (naudotas), Electric motor, three-phase motor, brake motor - Manufacturer: Siemens, electric motor type 1LC3113-4BB23 Z from Deckel FP4L milling machine - Power: 4.0 kW - Speed: 1,435 rpm - Design: B14 - Protection class: IP 44 Iodpfsul H Dwjx Abvjat - Brake: Disc brake type EK5dB24 - Dimensions: 575/270/H225 mm - Weight: 64 kg

Būklė: geras (naudotas), Deckel CNC įrankių frezavimo staklės Valdymas Matmenys ir svoris: Svoris: apie 1,3 t – 1,5 t. Matmenys: apie I x P x A 1,5 m x 1,5 m x 1,6 m Staklės turi mechaninius rankinius ratukus valdymui rankiniu būdu, nors yra CNC valdymas Isdpfxjynf E Tj Abvjat Valdymas: DECKEL Dialog 4 (6004 50 004602 02) Mokymo staklės Duomenys paimti nuo staklių, todėl be garantijos

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP2 repowered by FPS, year of manufacture 2013, equipped with 3-axis Heidenhain ND 780 digital readout. Like new condition! Technical data: - Machine No.: 2202-7020, FPS No.: 3364, year of manufacture 2013 - Fixed angle table - Spindle speed: 40 - 2000 rpm - Feed and rapid traverse on 3 axes - Motor power: 2.2 kW - Travel X/Y/Z: 400/200/400 mm - Equipment: vertical & horizontal spindle - Vertically and horizontally extendable quill – SK-40 - Drawbar system S20x2 - Weight approx. 1,100 kg Accessories and configuration: - 3-axis Heidenhain ND 780 digital readout - Brake motor with instant spindle stop - Centralized lubrication system - 2x emergency stop buttons - Operating manual - Coolant system About the machine: For sale is a Universal Milling Machine Deckel FP2 repowered by FPS, in mint condition. The Deckel is equipped with a brake motor for immediate spindle stop and an electric central lubrication system. For safety, it features two emergency stop switches (as of 2013). Mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test the Deckel under power on site. The machine is immediately available. Isdpfx Ajvbifgjbvjat

Būklė: naudotas, Priešgingnis ir adapteris frezavimo staklėms horizontaliam frezavimui Priešgingnis ir adapteris (priešlaikis) frezavimo staklėms DECKEL (Guolio blokas su kregždės uodegos tvirtinimo adapteriu DECEL FP1 + FP2) Tipas 9570 Kregždės uodegos plotis siauras: apie 72 mm Kregždės uodegos plotis platus: apie 88 mm Kregždės uodegos aukštis: apie 15 mm Ilgis (guolio blokas): 133 mm Plotis (guolio blokas): 50 mm Bendras aukštis (guolio blokas): 105 mm Guolio skylė: Ø 17 mm (su bronzine guolių įvore) Ašių atstumas nuo skylės iki kregždės uodegos: apie 82,5 mm (centrinės ašies aukštis) - Adapteris tinka kregždės uodegai ir tvirtinimo paviršiui, pakilimas 22,5 mm iki 105 mm ašies aukščio Bendras ilgis (kregždės uodegos bėgis): 635 mm Svoris: 3,8 kg labai gera būklė Ijdoxcbl Djpfx Abveat

Būklė: naudotas, x-axis travel: 800 mm Iajdoqpl Uuspfx Abvot y-axis travel: 400 mm z-axis travel: 300 mm Digital readout: Heidenhain Table clamping surface: 1000 x 520 mm Speed range: 40 – 2000 rpm Spindle taper: SK 40 Total power requirement: 2.2 kW Machine weight: approx. 2.2 t Required space: approx. 1700 x 1600 x 1800 mm Deckel FP 2 B – Slant bed, travelling column design Universal swivel-tilt table Incl. various SK40 tool holders, pull stud thread S20x2 Collet chuck Machine was overhauled for approx. €24,000.00

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, F736 Universal Milling Machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 retrofit carried out by FA Huttelmaier In very good condition Iedpfx Asu Nvwvsbvsat Technical Data: >> Year of manufacture: 1985 Machine No.: 2102-2891 >> Rigid angle table >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head transversely adjustable on spindle carrier by 100 mm >> Vertical and horizontal quill - SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC111 >> Coolant system >> Operating manual, spare parts plan About the Machine: Offered is a Universal Milling Machine Deckel FP1, year of manufacture 1985, in very good condition. The FP1 received an overhaul at Huttelmaier in 2008. The machine has minimal backlash and all lead screws operate smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. On this later FP1 model, the feed is infinitely variable in all three axes, and rapid traverse is also available in these axes. A significant benefit is the active 3-axis digital readout system. With this Heidenhain distance control, you can enter dimensions, which the machine then approaches automatically. The FP1 was located in a training workshop, where it was only used occasionally. Oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test this prime example under power on site.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Universal Milling Machine Deckel FP1 with 3-Axis Digital Readout RSF 2006, Fully Refurbished, TOP Condition Technical Data: >> Machine No. 53819/08 >> Fixed Angle Table >> Spindle Speed: 40 - 2000 rpm >> Feed on 2 Axes >> Motor Power: 1 / 1.5 kW >> Travels X/Y/Z: 300/150/340 mm >> Vertical and Horizontal Quill - ISO 40 taper >> Spindle Brake Iedpfx Absvb Ud Usvsat >> Drawbar System S20x2 >> Weight approx. 700 kg Accessories and Equipment: >> 3-axis digital readout by RSF Elektronik >> Coolant device >> Machine leveling feet About the Machine: Offered is a Deckel FP1 universal milling machine in very good condition. The Deckel has minimal backlash and all spindles move smoothly. An oil change has been performed. The FP1 was completely overhauled by Huttelmaier in 2006 and has seen very little use since. The RSF digital readout makes work easier and even more precise. Take the opportunity to inspect and test this machine onsite under power.

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP2, Special Coating in Light Grey with New 3-Axis Digital Readout K+C Technical Data: >> Machine No. 5983, Year of Manufacture approx. 1975 Iaodpfx Asu I Rm Nsbvot >> Fixed angle table (newly refurbished) >> Spindle speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 2.2 kW >> Travel X/Y/Z: 400/200/400 mm >> Features: vertical & horizontal spindle >> Extendable vertical and horizontal quills – SK 40 >> Drawbar system S20x2 >> Weight approx. 1100 kg Accessories and Equipment: >> 3-axis digital readout K+C, newly installed with manufacturer’s warranty. Display unit: set reference points, zero points, input of coordinates, mm/inch switching, absolute or incremental coordinates, circle functions, hole patterns, radius milling functions, etc. >> Operating manual for the digital readout >> Coolant unit About the Machine: Offered here is a Deckel FP2 universal milling machine in very good condition. The Deckel has minimal backlash and all spindles move smoothly. The machine was completely disassembled and repainted. Oil change has been carried out. Mechanically and electrically tested. The K+C digital readout makes working easier and even more precise. You also receive a 1-year warranty on the new digital readout. Take advantage of the opportunity to view and test the Deckel under power on-site. The machine is available immediately.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1978, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP2 with 3-Axis Heidenhain Digital Readout, Infinitely Variable Feed, in Very Good Condition Technical Data: >> Year of manufacture: 1978, Machine No. 2202-10163 >> Fixed angle table >> Spindle speed: 25 - 2500 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 3.0 kW >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm Iasdpfjxghtvex Abvet >> Vertical milling head on spindle carrier, adjustable by 150 mm >> Extendable vertical and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 1400 kg Accessories and Features: >> 3-axis Heidenhain digital readout >> Coolant system >> Mechanical central lubrication About the Machine: For sale is a universal milling machine Deckel FP2 in very good condition. The FP2 shows minimal play in the cranks and all spindles move smoothly. Even at maximum speeds, the milling machine runs quietly. With this newer FP2 model, the feed is infinitely variable in all three axes and the machine is also equipped with rapid traverse for each axis. An oil change has been carried out. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take advantage of the opportunity to inspect and test this machine under power at our facility.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1989, Dear Sir or Madam, Iaedpjpy Eldefx Abvot For sale is a partially refurbished Deckel FP1 milling machine with 3-axis Heidenhain TNC113 active control, notable for its user-friendly operation. This newer model, manufactured in 1989, features central lubrication, an electric coolant pump, and a machine lamp. The machine has been extensively partially overhauled in our workshop and is therefore in excellent condition. You are welcome to inspect it on site. Delivery time: on request Machine no.: 2102-xxxx Table: fixed angle table or rotary/swivel tilting table Travel paths: X300mm / Y160mm / Z340mm Quill stroke: 60mm Connected load: 1.9KW Number of spindle speeds: 16 Speed range: 40–2000 rpm Tool taper: SK40 Feed: infinitely variable 5–500 mm/min Rapid traverse: 1200 mm/min Equipment and accessories: 3-axis Heidenhain TNC113 digital readout with active control, stepless feed regulation on all 3 axes, coolant system, central lubrication, technical documentation, leveling feet, safety equipment (optional) Our service commitment to you: - We are a certified master workshop specializing in mechanical engineering. - All machines undergo thorough inspection. - All lubricants and, if necessary, worn parts are replaced beforehand. - On request, we can provide a complete or partial overhaul of the selected machine. - You can order additional accessories such as tools, etc., directly with your purchase. - On request, additional features such as safety equipment can be supplied and installed. - We are happy to arrange shipping and/or machine installation for you.

Būklė: naudotas, CNC milling machine DECKEL type FP 3 A Universal milling machine with handwheels, also suitable for conventional operation Serial No. 2206 – Year of manufacture: 1982 CNC path control: GRUNDIG CNC 2101 Travel distances: X: 490 mm, Y: 300 mm, Z: 340 mm Iaedpov R E Rdofx Abvot Table size: 705 x 425 mm Spindle taper: SK 40 Quill stroke: 100 mm Spindle speed: 25 – 2500 rpm, 21 steps Feed speed: 5 – 500 mm/min, stepless Rapid traverse speed: 1200 mm/min Spindle drive motor power: 2 / 4 kW, pole-changing Electrical connection: 380 Volt, 50 Hz - CNC path control GRUNDIG CNC 2101 - Mechanical handwheels for all three axes - Universal tilting, swiveling, and rotating table - Vertical milling head swivels and is manually adjustable by 200 mm - Hydro-mechanical tool clamping - Coolant system integrated in the machine base - Safety enclosure at the front and sides with 3 folding doors - Control cabinet positioned beside the machine (L x W = 600 x 430 mm) Space requirement (L x W x H): 1900 x 1700 x 1950 mm Weight: 1700 kg (Machine 1540 kg + Electrical cabinet 160 kg) Very good condition

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1990, Universali frezavimo staklė Gamintojas: DECKEL Modelis: FP 1 Aktiv Pagaminimo metai: 1990 – patikrinta dirbtuvėse Mašinos Nr.: 2102-5866 Frezgalvės tipas: 2171 Frezgalvės numeris: 4613 Geometrinis priėmimas su tikrinimo protokolu Priedai: - 3 ašių aktyvusis skaitmeninis indikatorius HEIDENHAIN TNC 113 su aktyvia X, Y ir Z ašių funkcija - Universalus stalas 590 x 250 mm (T-griovelis: 12 mm) - Vertikali frezgalvė SK 40 su įtempimo sriegiu S 20 x 2 - Be aušinimo įrenginio, gali būti sumontuotas pagal poreikį - Centrinis elektrinis tepimas - Naudojimo instrukcija Iaodpox S Edljfx Abvet Naudota, kaip matyta, be garantijos Mašina atitinka techninį to laiko lygį.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1987, Universal tool milling machine Brand: DECKEL Model: FP 1 Aktiv Year of manufacture: 1987 – overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey Machine no.: 2102-3429 with warranty Ijdpshtrd Ijfx Abvjat Geometric acceptance with inspection protocol Accessories: - 3-axis active digital display HEIDENHAIN TNC 113 with active function in X, Y, and Z axes - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawbolt thread S 20 x 2 - Coolant system - Central lubrication, electric - Operating manual - used, as seen -

Gamybos metai: 1982, būklė: visiškai atnaujintas (naudotas), Universal tool milling machine Brand: DECKEL Model: FP 3 Aktiv Year of manufacture: 1982 - overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2201-5539 with warranty Geometric inspection with test protocol Accessories: - 3-axis active digital display HEIDENHAIN TNC 111 Isdpfx Ajpn Rgvebveat - Universal table 650 x 370 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread M 16 - Central lubrication, manual operation - Coolant system - Operating manual Used, sold as seen The machine is technically in accordance with the standards as of the year of manufacture.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1988, Universal tool milling machine Make: DECKEL Model: FP 3 LV Aktiv Ijdpfjtdnb Ejx Abvjat Year of manufacture: 1988 – overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2309-0146 Milling head type: 2271 Milling head no.: 700-0887 Warranty: 12 months, single-shift operation from delivery, covering the mechanics overhauled by us. The electrical and electronic components are excluded from the warranty, as they have only undergone a functional test. For machines located outside our North Bavarian sales area, travel expenses are to be borne by the customer. Geometric inspection with test protocol Accessories: - 3-axis active digital display HEIDENHAIN TNC 113 - Fixed table 1,390 x 550 mm (T-slot: 16 mm) - Vertical milling head SK 40 with M 16 drawbar thread - Central lubrication, manually operated - Coolant system - Operating manual Used, as seen The technical condition of the machine corresponds to the standard of the year of manufacture.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1976, Universal milling machine Manufacturer: DECKEL Model: FP 1 Year of manufacture: 1976 – overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey / RAL5008 grey blue Machine no.: 52860/08 Milling head no.: 7296/80 Warranty: 12 months, single-shift operation from delivery, covering the mechanics overhauled by us. Electrical and electronic systems are excluded from the warranty, as they have only been function-tested. Isdpfx Abomhfrrsveat For machines located outside our North Bavarian sales region, travel costs are to be borne by the customer. Geometric inspection with inspection protocol Accessories: - 3-axis digital readout FAGOR Innova 30i-M, new - Fixed table 600 x 210 (T-slot: 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Coolant system - Operating manual Used, as inspected Technically, the machine corresponds to the state of the art at the time of manufacture.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1978, Universal tool milling machine Make: DECKEL Model: FP 1 with infinitely variable feed Iasdpfxjdf E H Ae Abvst Year of manufacture: approx. 1975 – partially overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey / RAL5012 light blue with warranty geometrical inspection with test report Accessories: - 3-axis digital readout, FAGOR Innova 30i-M, new - Fixed table 600 x 250 (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Coolant system - Operating manual - used, as seen -

Būklė: naudotas, Gamybos metai: 1989, Universal tool milling machine Manufacturer: DECKEL Model: FP 1 Aktiv Year of manufacture: 1989 – workshop-inspected Machine No.: 2102-5561 Milling head type: 2171 Milling head number: 4393 Geometric inspection with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function for X, Y, and Z axes - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 Iajdper En Dyofx Abvet - Coolant unit - Centralized electrical lubrication system - Operating manual Used, as seen, without warranty The machine corresponds technically to the state of the art at the time of manufacture.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1990, Universali frezavimo staklė Gamintojas: DECKEL Iaodpfx Abjx It Rxsvst Modelis: FP 1 Aktiv Pagaminimo metai: 1990 – patikrinta dirbtuvėse Mašinos Nr.: 2102-5866 Frezgalvės tipas: 2171 Frezgalvės numeris: 4613 Geometrinis priėmimas su tikrinimo protokolu Priedai: - 3 ašių aktyvusis skaitmeninis indikatorius HEIDENHAIN TNC 113 su aktyvia X, Y ir Z ašių funkcija - Universalus stalas 590 x 250 mm (T-griovelis: 12 mm) - Vertikali frezgalvė SK 40 su įtempimo sriegiu S 20 x 2 - Be aušinimo įrenginio, gali būti sumontuotas pagal poreikį - Centrinis elektrinis tepimas - Naudojimo instrukcija Naudota, kaip matyta, be garantijos Mašina atitinka techninį to laiko lygį.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1994, Universal tool milling machine Make: DECKEL Model: FP 4 MK Aktiv Iaodpfx Absfzbtmevjt Year of manufacture: 1994 - overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine No.: 2203-8668 with warranty Geometric inspection with test protocol Accessories: - 3-axis digital readout HEIDENHAIN TNC 113 - Universal table 660 x 380 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tool clamping DIN 2080 - Chip tray - Central lubrication, electric - Coolant system - Operating manual -used, as seen-