Dažų Pašalinimas Dažų Sienos pirkti naudotą (1 616)

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 5 600 mm, bendras ilgis: 11 200 mm, bendras plotis: 5 100 mm, įvesties srovės tipas: trifazis, garantijos trukmė: 24 mėnesiai, vidinis aukštis: 4 970 mm, vidinis ilgis: 11 000 mm, temperatūra: 80 °C, vidinis plotis: 5 000 mm, oro poreikis: 52 000 m³/val, įėjimo įtampa: 380 V, šildymo galia: 250 kW (339,91 AG), galia: 45 kW (61,18 AG), kuras: suskystintos naftos dujos (LPG), įėjimo dažnis: 50 Hz, energijos suvartojimas: 45 kWh, izoliacijos storis: 50 mm, nominali galia: 250 kW (339,91 AG), plieno lakšto storis (maks.): 2 mm, Įranga: apšvietimas, * Air Treatment Unit: The air treatment unit is a recirculation system that supplies the cabin with filtered fresh air and expels used air during the painting process. It heats the air to 60°C, mixes 10% fresh air with recirculated air via an automatic multi-damper system, and reheats the air before it is fed back into the cabin. Air is heated using a burner and heat exchanger, both made from high-grade 304 stainless steel and housed in the fresh air unit. During painting, the air passes through two stages of filtration (front and ceiling filters) before entering the cabin. The contaminated air is also filtered twice (inlet and outlet filters) before leaving through the extraction unit. Air treatment units are insulated like the side walls to minimize heat loss and are equipped with rubber seals on the covers to protect against possible vibrations and noise. The exhaust air is regulated by a damper in the exhaust air duct, which helps control the cabin’s internal pressure. * PRINCIPLE OF OPERATION FOR THE CABIN: Processes inside the cabin are controlled via an operator panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passes through front filters before entering the distribution chamber at ambient temperature. The air is then extracted through the exhaust unit. Floor filters (paint stop) capture paint particles, and the air passes through final exhaust filters before being released. * FLASH-OFF PROCESS: After painting, the cabin continues to operate for about 15 minutes to expel residual solvents and thinners. During this process, fresh air from outside circulates in the cabin. * DRYING PROCESS: In this phase, 80% of the air circulating through the cabin is heated to 60°C and supplied to the cabin via the distributor. Since 20% of the solvents are released during drying, they are expelled along with this air. Industrial paints are generally dried at 60°C, though the cabin temperature can be adjusted via the operator panel as needed. Ncsdswzl Hxjpfx Af Ijl * COOLING PROCESS: After the 30-minute drying phase, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system is restarted. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices integrated into the cabin. The panel is constructed from robust galvanized sheet metal and steel profiles, and is fully enclosed for protection from dust and moisture. Electrical Components and Switching Panels: • The switching panel includes all necessary components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for control and command connections between the control panel and motors or other electrical devices. • Wiring is designed to allow for cabin relocation, if required. • Operating equipment is powered at 380 V 50 Hz, while control devices run at 220 V.

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: Nuolatinė srovė, įėjimo įtampa: 220 V, Pilnaviduriai lazeriniai spausdintuvai (2), iš jų vienas visiškai naujas Įskaitant 1 naudotą ir 3 naujus Pro Deck Lite C1 Įskaičiuota: 29 dažų kasetės (T01 geltona, T01 žydra, T01 juoda, T01 purpurinė) 8 atliekų tonerio talpyklos 2 priedų rinkiniai (įskaitant vertikalią valdymo panelę, Pod Deck Lite Attach. Kit-B, Auto Gradation Sensor-A1, 4 T01 dažų kasetės, kopijavimo skyrių, spausdintuvo dangtį ir maitinimo laidą C13) 3 kopijavimo skyriai Njdpfxox Ir R De Af Ijcl

Sąlyga: naudotas, Naudota Wefco talpa – vertikalus maišymo rezervuaras, bendras tūris 58 500 l, pagamintas iš 304L nerūdijančio plieno. Vidaus matmenys – apie 3370 mm skersmuo, 6165 mm cilindro aukštis. Talpa turi prisuktą plokščią dangtį viršuje bei privirintą rutulinį dugną. Vidaus darbinis slėgis –6/+56 mbar, temperatūra 0–50 °C. Integruotas vidinis spiralinis šilumokaitis, slėgio projektinis lygis – visiškas vakuumas/4,5 bar. Įrengtas iš viršaus montuojamas dviejų lygių, 4-menčių, kampu įtaisytas maišytuvas, kuris tiesiogiai pavaromas 5,5 kW, 3/50, 1455/47 aps./min SEW-Eurodrive varikliu ir reduktoriumi. Taip pat įeina 4 kryptiniai skersiniai (bafliai). Rezervuaras montuojamas ant trijų tvirtinimo kojelių (auselių). Nedeyanykepfx Af Ijcl Specifikacija: Talpa: 14 505,9 gal Skersmuo: 11,05' Aukštis: 20,22' Plieno rūšis: 304L Dangčių tipas: prisukamas plokščias viršus, privirintas rutulinis dugnas Pozicija: vertikalus Pagrindas: 3 auselės

Gamybos metai: 2026, Sąlyga: naujas, Arklidžių šildymas ir/arba šieno džiovinimas, šieno džiovinimo įrenginiai ir džiovinimo kabinos, montuojamos konteineriuose „plug and play“ principu (paruoštos tiesioginiam naudojimui, taip pat nuomojamos). Montavimas konteineryje arba vietoje Šveicarijoje, Austrijoje ar Pietų Vokietijoje. Galia nuo 80 kW iki 500 kW, pagal užklausą – daugiau nei 500 kW. Šilto oro šildytuvai sandėlyje, nauji ir naudoti! Nsdpfxokytn He Af Iscl

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (length/width/height) 1624x950x2345 mm Weight 0 kg Total power requirement 1.5 kW Dry spray booth E-1616 Ncodovz El Njpfx Af Iol - Working area 1600 x 1600 mm - Incl. fan with 5,000 m³/h air capacity - Exhaust diameter 350 mm - Explosion-proof motor, 1.5 kW - Width 1624 mm - Depth 950 mm - Height 2345 mm

Sąlyga: geras (naudotas), Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank We are offering a used partition wall manufactured by Schulte for sale. Technical specifications for the partition wall: Manufacturer: Schulte The partition wall is suitable for a shelving depth of 250 mm. Scope of delivery includes: 01x partition wall, used Material finish: galvanized Overall width: approx. 230 mm Weight / piece: approx. 0.361 kg Partition wall (height): approx. 150 mm The partition wall is used and may show slight signs of dirt, dents, scratches, etc. Our range of services at a glance: (Prices upon request) Assembly and installation Our general assembly conditions apply Rack inspection Nodog Urd Aopfx Af Iecl Racking inspection according to DIN EN 15635 performed in compliance with BGR 234 visual inspection requirements for all racking systems Delivery with our own fleet (unloading not included)

Sąlyga: geras (naudotas), Jūsų kontaktiniai asmenys mūsų įmonėje: Ponai: Andre Evering Mario Klöver Falk Deutsch Simon Blank Techniniai duomenys apie lentynų skyriaus pertvarą: Lentynų sistema: SSI Schäfer Tipas: R3000 Komplektacijoje yra: 01x skyriaus pertvara, naudota Tipas: TRF4410 Modelis: pastatoma Medžiagos spalva: sendzimir cinkuota Bendras gylis: apie 365 mm tinka stovo gyliui: 400 mm Bendras aukštis: apie 130 mm Naudojamas aukštis: apie 100 mm Medžiagos storis: apie 0,60 mm Svoris / vnt.: apie 0,202 kg Mūsų paslaugos trumpai: (Kainos pagal užklausą) Montavimas, surinkimas reikia laikytis mūsų bendrųjų montavimo sąlygų Lentynų patikrinimas Lentynų inspekcija pagal DIN EN 15635, atliekama pagal BGR 234 reikalavimus, vizualinė patikra visoms lentynų sistemoms Pristatymas su mūsų nuosavu transportu (iškrovimas neįskaičiuotas) Nedpfx Afsg T H Dzo Iscl

Sąlyga: geras (naudotas), Pristatymo komplektaciją sudaro: 01x galinė grotelė, naudota Ncedpsxcuc Aefx Af Ijl Medžiagos spalva: geltona Bendras plotis: apie 2 740 mm Bendras aukštis: apie 1 100 mm Akies dydis: apie 50 x 50 mm Rėmo profilio išmatavimai: apie 40 x 40 x 4 mm Vielos storis: apie 3,0 mm Svoris | vnt.: apie 26,84 kg Jūsų kontaktiniai asmenys mūsų įmonėje: Ponas: Andre Evering Ponas: Mario Klöver Ponas: Falk Deutsch Bendra informacija apie prekę: Ši prekė siūloma tik atsiėmimui. Jeigu pageidaujate transportavimo ar siuntimo, šios paslaugos teikiamos už papildomą mokestį, kuris priklausomai nuo pristatymo vietos ar kiekio gali būti pateiktas pagal užklausą.

Sąlyga: labai geros būklės (naudotas), Servatechnik ištraukimas Ncedpex Nbnnjfx Af Iel

Gamybos metai: 2011, Sąlyga: labai geros būklės (naudotas), This is a complete plant for house construction. Prices for each item are listed individually. Comprising the following elements (see attached document): Images will follow and are already included in the attached document. Table 1 (Positioning and clamping the stud frame) €34,500 • Adjustable longitudinal conveyor with 3 hinged belt conveyors and sheathing • Pneumatic cross-clamping • Connections for compressed air and electricity Table 2 (Placing and fastening the first sheathing layer) €25,300 • Longitudinal conveyor with 3 hinged belt conveyors and sheathing • Pneumatic cross-clamping • Connections for compressed air and electricity Intermediate conveyor, 3 m length (parking bay for multifunction bridge) €4,600 • Longitudinal conveyor with 3 hinged belt conveyors Table 3 (Placing the second sheathing layer, fastening, and flipping the element onto the next table) €35,650 • Longitudinal conveyor with 3 hinged belt conveyors and sheathing • Pneumatic cross-clamping • Connections for compressed air and electricity • Hydraulic turning device Table 4 (Installation of electrical systems and insulation) €34,500 • Cross transfer with rollers and sheathing • Table cross-travel function • Connections for compressed air and electricity • Hydraulic turning device Nodpfju D Amgsx Af Ijcl Table 5 (Placing the first sheathing layer and fastening the second side) €32,775 • Longitudinal conveyor with 3 hinged belt conveyors • Cross transfer with rollers • Pneumatic cross-clamping • Connections for compressed air and electricity Intermediate conveyor, 3 m length (parking bay for multifunction bridge) €4,600 • Longitudinal conveyor with 3 hinged belt conveyors Table 6 (Placing and fastening the second sheathing layer) €28,750 • Longitudinal conveyor with 3 hinged belt conveyors • Pneumatic cross-clamping • Connections for compressed air and electricity Table 7 (Erection and distribution table) €29,900 • Longitudinal conveyor with 3 hinged belt conveyors • Hydraulic tilting unit • Table cross-travel unit • Overhead guide for holding the walls vertically Manual surface gantry with vacuum lifter on Table 2 (placing the first sheathing layer) €13,800 • Load capacity 85 kg with Schmalz vacuum unit • Steel base frame with low-friction rails • Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 3 (placing the second sheathing layer) €13,800 • Load capacity 85 kg with Schmalz vacuum unit • Steel base frame with low-friction rails • Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 5 (placing the first sheathing layer on the second side) €13,800 • Load capacity 85 kg with Schmalz vacuum unit • Steel base frame with low-friction rails • Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 6 (placing the second sheathing layer on the second side) €13,800 • Load capacity 85 kg with Schmalz vacuum unit • Steel base frame with low-friction rails • Travel range 12 x 5 m Wall storage 1: 12 m long, 24 bays €11,500 Wall storage 2: 12 m long, 20 bays Vacuum lifter with column-mounted slewing crane €9,200 1 traverse, 2 t Abus €20,125 1 traverse, 2 t

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 008047, Pozicija 1: Šepetėlinė mašina SCM-BRAVOROBOT P1 Ncodpfx Aew Idbyef Iol Pozicija 2: Dažymo mašina SCM-BRAVOROBOT P1 Pozicija 3: Perkėlimas SCM-BRAVOROBOT P1 Pozicija 4: Suslėgto oro džiovintuvas SCM-BRAVOROBOT P1 Pozicija 5: Lako džiovinimas SCM-BRAVOROBOT P1

Sąlyga: naujas, Mobile design High separation efficiency & high extraction performance Easy to handle Ncsdpfohby Risx Af Iel Long filter life – resulting in minimal downtime Flexible thanks to extraction technology with front plate system Motor data: 0.75 / 2.1 kW ex / 400 V / 50 Hz Speed: 960 / 1,430 rpm Airflow: 3,000 / 6,800 m³/h Usable pressure: 400 / 500 Pa Dimensions (W/ H/ D): 1,912 x 1,405 x 943 mm with side panels folded out: 2,971 x 1,405 x 1,215 mm Filter area: 2 m² Sound pressure level: 72.0 dB(A) Weight: 248 kg

Sąlyga: naujas, Gamybos metai: 2026, Pneumatic Double Diaphragm Pump Cobra 40-10 Njdpfx Aobuqn Hef Ijcl Its unique design enables low-pulsation operation Consistent material flow for perfect spray pattern and superior surface quality Ideally suited for processing shear- and moisture-sensitive materials Minimal shear forces – perfect for processing, e.g., UV coatings Ideal for handling small material quantities and frequent color changes Scope of delivery: Base unit on frame, 7.5m high-pressure twin hose, 5L upper container Ex, AirCoat gun AC 4600 Professional including red air cap and holder, Air Coat nozzle ACF 3000 11/40 Technical data: Translation ratio: 40:1 Displacement per double stroke: 10 cm³ Flow rate at 200 double strokes: 2 l/min Max. operating pressure: 250 bar Weight: 23 kg Location: 54634 Bitburg Special price – available immediately

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2020, Pneumatinė dvigubos membranos pompa Cobra 40-10 Puiki būklė – pagaminta 2020 m. Unikali konstrukcija leidžia dirbti beveik be pulsacijų Tolygus dažų srautas tobulam purškimo srautui ir aukščiausiai paviršiaus kokybei užtikrinti Idealiai tinka perdirbti kirpimui ir drėgmei jautrias medžiagas Minimalios kirpimo jėgos – puikiai tinka, pvz., UV lakams apdoroti Idealiai tinka mažiems medžiagų kiekiams ir dažniems spalvų keitimams Komplektacija: pagrindinis įrenginys su stovu, didelio slėgio dviguba 7,5 m žarna, 5 l EX viršutinis bakas, AirCoat pistoletas AC 4600 Professional su raudonu oro dangteliu ir laikikliu, AirCoat antgalis ACF 3000 11/40 Techniniai duomenys: Perdavimo santykis: 40:1 Tūrinis debitas per dvigubą eigą: 10 cm3 Tūrinis debitas prie 200 dvigubų eigų: 2 l/min Maksimalus darbinis slėgis: 250 bar Svoris: 23 kg Vieta: 54634 Bitburgas Ncjdpjxdtkuofx Af Isl Labai mažai naudota –

Sąlyga: naujas, Gamybos metai: 2024, Advantages - Compact design, space-saving - Powerful, high extraction capacity, low operating costs - Easy maintenance, long filter service life - Universally applicable, variable accessories - High flexibility - Mobile construction - Extraction technology with front sheet system Technical Data: Motor rated power: 0.75 kW / 2.1 kW Motor speed: 960 / 1430 rpm Air volume: 6,800 m³/h Filter area: 2 m² (2 x 1 m) Connection diameter: 300 mm with throttle valve Dimensions (W / H / D) in mm: 2971 x 1405 x 1215 Weight: 248 kg Nedpfx Aobpg E Eof Ijcl

Sąlyga: naujas, Gamybos metai: 2025, Paint mist extraction unit AL-KO Colour Jet 1 Paint mist extraction unit, ready for operation, 1 sqm filter area with pre-filter and fine filter, connection diameter 300 mm, 1.5 kW ex-rated motor (suitable for installation in Zone 22 according to ATEX), single-stage switch + 5 m cable with plug and throttle valve. • Compact, space-saving sheet steel construction • Chassis with wheels • Indirect extraction near the floor • Completely pre-assembled • With connection cable and phase reverser • Adjustable side panels • Optimized spray mist capture thanks to patented front panel hood • Long filter service life • High-performance fans with low noise level • Filter wall with special mats • Exhaust nozzle with integrated throttle valve Nedpfxobumr So Af Iocl Motor power: 1.5 kW Speed: 1400 rpm Nominal airflow: 4600 m³/h Pressure: 500 Pa Dimensions (W*H*D): 1025*1437*1214 mm (Width 2000 mm with side panels) Filter area: 1 m² Weight: 175 kg

Sąlyga: naujas, Gamybos metai: 2025, garantijos trukmė: 12 mėnesiai, bendras plotis: 1 900 mm, bendras ilgis: 1 800 mm, bendras aukštis: 1 550 mm, ENGLISH VERSION – SPRAY PAINT STRIPPING MACHINE Nsdpfxoghl Dze Af Ijcl 1. EXTERNAL DIMENSIONS Width: 1,800 mm Length: 1,900 mm Height: 1,600 mm 2. WORKING DIMENSIONS Width: 1,300 mm Length: 1,300 mm Height: 670 mm* 3. TECHNICAL DATA Total power: 9.2 kW Heating power: 7.0 kW Pump power: 2.2 kW Number of nozzles: 24 Flow rate: 320 l/min Operating pressure: 4.5 bar Operating temperature: 85°C Material: Acid-resistant stainless steel AISI 316 (1.4401) 4. TANK & HEATING SYSTEM Jacket volume: 167 l (±2%) Main tank volume (paint stripping liquid): 480 l (±2%) Heating system: Indirect heating system with separate control for jacket and main tank 5. MACHINE DESIGN The tank is equipped with 4 adjustable feet. Control panel integrated in the machine base. Industrial CLICK-CLACK quick coupling system for fast and secure connection. 6. CONTROL SYSTEM 2 × temperature controllers: - for the heating jacket - for the main tank Cycle time controller LED indicator lights for monitoring correct operation 7. MACHINE CAPACITY Suitable for 4–8 rims up to 23”. 8. WORKING GRATE Manufactured entirely from acid-resistant stainless steel AISI 316 (1.4401). Serves as a working platform for rims or components to be stripped. High chemical and mechanical resistance. 9. ROTATING NOZZLE SYSTEM 2 rotating arms The machine is equipped with two rotating arms. A total of 24 specially designed nozzles provide multidirectional high-pressure spraying. Ensures fast and uniform paint removal, even in hard-to-reach areas. 10. APPLICATION Spray paint stripping machines are a modern and highly efficient solution for fast and clean removal of coatings from aluminum rims. They are increasingly used in tire shops, automotive workshops, and professional rim refurbishment companies. 11. KEY ADVANTAGES Ideal for rim refurbishment, tire service, and automotive workshops. Perfect stripping results thanks to counter-rotating nozzles. Extends the service life of other machinery and tools. Optimizes personnel working time. Precise, efficient, and reproducible working process.

Sąlyga: naujas, Gamybos metai: 2024,

Sąlyga: naudotas,

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, stand for drying elements after painting, double-sided, shelf length 780 mm, maximum spacing 2520 mm, minimum spacing 350 mm, 22 shelves, rods coated with rubber, mobile design, distance between rods 115 mm Njdpfxsvcb Ivs Af Iscl

Sąlyga: naujas, Gamybos metai: 2026, Wet paint spray/drying booth Internal dimensions: L8000 x W4000 x H3000 mm 30,000 m³/h supply air / 30,000 m³/h exhaust air Nedpfx Aohzbq Tjf Iocl Paint temperature: adjustable, standard at 20°C; maximum drying temperature: 70°C Indirect gas burner approx. 300 kW (suitable for -10°C to +20°C ambient) Control system integrated in existing switch cabinet Ceiling supply air with filter G4/EU4 and NF600PA Exhaust at floor level via grating, PS50 fiberglass Lighting: LED wall-mounted units (4 x 18W), 750 LUX Grating point load capacity: max. 750 kg

Sąlyga: naujas, Gamybos metai: 2026, bendras aukštis: 3 000 mm, bendras ilgis: 4 900 mm, bendras plotis: 2 400 mm, tūrio srautas: 3,6 m³/val, įvesties srovės tipas: trifazis, galia: 1,1 kW (1,50 AG), Įranga: kabina, Wet paint spraying booth in cabin with extraction and supply air filter, lighting. Nedpjrvi Rijfx Af Iecl

Sąlyga: naujas, AUTOMATED PAINT SHOPS Nodpjdy Ez Isfx Af Iecl These are the paint shops where your product is designed and manufactured by our engineers in accordance with your capacity, application area, and other requirements. Maximum efficiency is targeted by providing electrostatic powder or wet painting, sandblasting, painting, glazing, coating, washing, and similar system requirements with minimal staff and minimal space requirements.

Sąlyga: naujas, These units are made from galvanized sheet metal and are designed to be fully bolted together. This requires very little space during shipping. The extraction system is developed separately and tailored specifically for each booth to ensure optimal extraction performance. Ncodpsdy Dv Djfx Af Iol Thanks to the extraction, personnel applying wet paint are not inconvenienced by paint fumes or overspray. In Elboy Wetline-KF wet paint spray booths, environmental pollution is prevented through the use of a filtration system comprising accordion filters and either cartridge or rolled fiberglass filters. Wet paint particles extracted from the air by the suction fan are captured by the accordion filter located at the rear of the booth. Trace amounts of wet paint particles that are not caught by the accordion filter are retained by the secondary fiberglass filter at the rear. The door system can be installed in various ways at the front access. UV lamps can be integrated into the cabinet to inspect the painting process.

Sąlyga: naujas, bendras aukštis: 3 500 mm, bendras ilgis: 7 000 mm, bendras plotis: 4 000 mm, tūrio srautas: 26 000 m³/val, garantijos trukmė: 12 mėnesiai, vidinis aukštis: 2 700 mm, vidinis ilgis: 6 900 mm, vidinis plotis: 3 900 mm, darbinio aukščio: 2 700 mm, Įranga: dokumentacija / vadovas, kabina, ⭐⭐⭐⭐⭐ (5.0) Customer Rating – Proven Quality! ⚡ Top Service – Fast Delivery – Reliable Support ⚡ ✈️ Plus shipping costs – Shipping available on request ⏰ 48H EXPRESS DELIVERY possible after deposit! Regular delivery time varies by stock availability between 1 business day and approx. 15 weeks. 🔧 Please note: Additional options may extend delivery times. 📩 Please inquire with the seller in advance to check immediate availability of your selected options. 🛒 ►►► Buy Now! ◄◄◄ 💸 Preserve liquidity – invest wisely! ✳️ We offer flexible financing options: ✔️ Hire purchase ✔️ Leasing ✔️ Warranty programs 📞 Contact us – we will find the right solution for your budget! ✨ Powerful. Economical. Efficient. ✨ 📦 Immediately available in three standard sizes! 📌 Our three most common cabin sizes are generally in stock and available at short notice. 📌 If larger paint areas are needed, we can modularly combine standard cabins to create tailor-made solutions – fully adapted to your space and process requirements! 🎨 PROTON WETLINE KKF-40-70-35 Premium Wet Paint Spray Booth & Drying System 📐 Technical Data (Internal / External): Length: 6900 mm / 7000 mm Width: 3900 mm / 4000 mm Height: 2700 mm / 3500 mm Air Preparation Box: 1350 x 2900 mm Ncedpfxeipvule Af Isl 🔧 Features: 🌬️ Vertical airflow via full-surface ceiling inlet plenum – for uniform, dust-free coating 🚪 3-wing main gate with viewing windows + service door with emergency lock in case of overpressure 💡 Shadow-free lighting, heat-resistant and compliant with standards ♻️ Recirculation system with controllable fresh air damper – rapid heat-up to 60–80°C in 8–15 min 🔇 Low-noise high-performance fans with constant airflow (0.30 m/s) 🛡️ Slight overpressure reliably protects against dust ingress 🔥 Heating System & Efficiency: Riello G20 Burner Heating power: approx. 200,000 kcal/h Efficiency: up to 99 % High-temperature heat exchanger made of special steel 🧼 Highest Standard Filtration Technology: ✅ Pre-filter (tear-resistant, up to 100 °C, DIN 53438-3 F1) ✅ Ceiling filter (EN 779: F5, polyester coated) ✅ Floor filter (Paint Stop, G3, silicone-free) ✅ Activated carbon filter (DIN 24184, Class G4) 🖥️ Intelligent Controls: Modern control panel for complete management of ventilation, heating, lighting, and safety – easy operation & standard-compliant 🖲️ Optional touchscreen control available 🧱 Flexible placement of air prep units – installable to the right, left, or rear of the cabin ➕ Optional Equipment (at surcharge): 🪟 Full-glass panorama gates 🧱 Roof with additional insulation 🎨 Integrated paint mixing station 🌈 Color selection: Any RAL color possible (standard: blue, white, orange, red, grey) 💡 Explosion-proof lighting (Exproof) 🌪️ Explosion-proof fan (Exproof fan) 🖥️ Touchscreen control system ⚠️ Choosing special equipment may extend delivery times. Please coordinate your options with our sales team in advance. 🚧 Installation costs not included in the price. 📍 These depend on your location – we will gladly provide you with a tailored quote! ☀️ 2-YEAR WARRANTY – Safe is safe! ☀️ ⭐ Follow us for new offers & promotions! ⭐ PROTON Maschinenbau GmbH – Your partner for professional painting technology with over 40 years of experience.