Dūmų I Traukimo pirkti naudotą (10 614)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, One-sided IMA NOVIMAT / CONTOUR / I / G80 / 790 / L20 edge banding machine for narrow edges, equipped with a servo-driven MFA corner copying unit Year of manufacture: 2009 Condition: Very good - Robust machine frame to which individual processing units are mounted. - Feed speed electronically adjustable from 6–30 m/min (the operating speed of individual processing units is not synchronized with the full feed speed range). - Feed chain guided in slideways with plastic wear plates and 80 mm wide rubber covering. - Automatic feed chain lubrication controlled by machine program. - Upper pressure unit made with a double V-belt, 70 mm wide, guided on ball bearing rollers; electronic height adjustment of the pressure unit. - Machine safety devices compliant with CE certification. - Soundproof and safety enclosures. - Edge banding unit with drive enclosed in sealed oil bath with glue pot (1 main driven pressure roller + 5 auxiliary rollers); pneumatic Quick-Lock glue pot system enables rapid exchange. - Touch screen display. - End trimming saw unit for trimming excess edging on both front and rear panel corners, features include: pneumatic saw tilting adjustment 0–25°, straight and bevel cuts, automatic saw positioning for two different edge thicknesses (e.g. 0.4 and 1.2 mm), and trimming excess for corner copying. - All processing units equipped with chip extraction. - Novimat Contour series edge banders, thanks to the powerful corner copying unit and short piece gaps (~300 mm), maintain very high machining quality. Basic technical data: - Coil edge thickness: 0.3 – 3 mm - Paper, PVC, and ABS edging: 0.3–3.0 mm - Veneer: 0.5–3.0 mm - Solid wood strips: 0.8–20 mm - Edge height: 14–65 mm - Maximum edge overhang at the top: • up to 8 mm edge thickness – 5 mm • above 8 mm – 2 mm Workpiece dimensions: - Minimum length in feed direction: 150 mm - Minimum workpiece width (at thickness up to 25 mm): 65 mm - Minimum thickness: 8 mm (without flat scraper) or 12 mm (with flat scraper) - Maximum thickness of workpiece: • without corner copying: max 60 mm • with corner copying: max 40 mm - Smallest workpiece: 150 × 150 mm or 65 × 300 mm (note: * 65 mm for max thickness 25 mm) Machine technical specifications: - Electronic feed speed control: 6–30 m/min Pjdpfow R S Sljx Afwsrd (note: feed rate may be limited by processing units) - Workpiece overhang from feed chain: • 38 mm (incl. edge thickness 0.3–8 mm) • 30 mm (incl. edge thickness 8.1–20 mm) Power supply: - Voltage: 400/230 V, +5/–10 % with neutral - Frequency: 50 Hz - Control voltage: 230 V AC / 24 V - Compressed air: 8 bar - Extraction air speed: 28 m/s

Sąlyga: labai geros būklės (naudotas), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in roll (min/max) mm 0.3 / 3 Veneer edges only partially possible up to max. 1.0 mm Panel thickness (min/max) mm 8 / 60 ICOS Open control unit Predpfx Aexp E R Defwsd Feed speed m/min (adjustable) 6 - 30 Pressure belt driven by V-belt Spraying unit (for liquid anti-adhesive) Adjustable stop ruler, CNC controlled - Panel infeed system 63.152 (mm 500 x 500) Jointing milling unit with CNC-controlled 08.379 (Kw 4.0 x 2) edge pressure zone (CNC-controlled) Gluing unit (P.U.R. glue + pre-melter) VTG + 283.203 Edge magazine for rolls (No. 1 + 6 way) Pre-milling unit 08.055.0.1680 (Kw 1.85 x 1) End trimming unit 08.42/30/B (Kw 0.66 x 2) 20 + 30 m/min (0°-25°) Milling unit 08.0587 (Kw 1.0 x 2) Multi-profile - (1 + 3 profiles) Spray units (for glide agent) Contour milling unit (for finish milling) CNC controlled - KFA 20 (Kw 0.18) 20 m/min Multi-profile scraper unit (CNC controlled) 08.516 (4 profiles) Flat scraper unit 08.521 Spraying unit (for polishing liquid) Buffing unit 08.617-2 (Kw 0.18 x 2) Standard milling unit for grooving/rebating 08.190 (Kw 4.5 x 1) 90°/180°/270° (CNC controlled)

Sąlyga: naujas, Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, vėsinimo galia: 700,2 kW (952,01 AG), aušinimo tipas: oras, bendras svoris: 7 460 kg, bendras plotis: 2 260 mm, bendras ilgis: 7 900 mm, bendras aukštis: 2 530 mm, garantijos trukmė: 6 mėnesiai, Oro aušinamas šaldytuvas CLIMAVENETA I-FX(1+I) CA 2722, 700,2 kW Aušinimo galia: 700,2 kW / 199,1 tonos (12/7 — 35°C) Pagaminimo metai: 2021 Papildomos opcijos: Ekonomizatorius Šaltnešio kontūrai: 2 vnt. Šilumokaitis: Apvalkalinis-vamzdinis Kondensatorius: Varis / aliuminis Kompresoriai: 1 vnt. BITZER CSCVH26-200Y-40A (inverterinis, sraigtinis) + 1 vnt. BITZER CSC8593-140Y-40D (sraigtinis) Šaltnešio tipas: R134A Ventiliatorių kiekis: 20 vnt. ZIEHL-ABEGG FN080-ZIA.GG.V7P3 Išmatavimai: 7,9x2,26x2,53 m Pjdpjwlnl Eofx Afword Svoris: 7460 kg Darbo valandos: 0/0 val. Būklė: Outlet. Yra krušos žymių (neturi įtakos veikimui).

Sąlyga: paruoštas naudoti (naudotas), Apvilkimo mašina, Apvalkalų piltuvė, Pralinai ir draže, Naudota įranga Prodpfxsw I Sbbj Afwsd Gamintojas: Walter Brucks Tipas: I Bendri matmenys: 1200 x 1380 x 1800 mm Svoris: 280 kg Elektros duomenys: 400 V, 3 A Virkštelės dydis: 1200 mm Ø x 650 mm Virkštelės anga: 740 mm Ø Talpa / maišymas: apie 150 kg

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, General Specifications: Machine Type: Edge Bander Model: Novimat Compact R3/L12 Year of Manufacture: 2021 Manufacturer: IMA Schelling Group Total Machine Length: 7 m Purpose: Industrial edge processing with high precision Key Features: - Automation of core functions enabling simple operation by a single operator - Heavy-duty frame construction ensuring high stability - Electronically adjustable top pressure rail - Dual-band pressure belt for secure transport of short workpieces - IMA quick-change glue system - Program-controlled feed speed - Multi-profile technology capability with automatic profile change - 21.5" industrial PC with touchscreen operation Technical Data: Workpiece thickness: 8–60 mm Minimum workpiece length: 150 mm Minimum workpiece width: 65 mm Maximum edge tape height: 65 mm Edging types: Paper, plastic, veneer (with optional protective coating) Edge tape thickness: 0.3–3 mm Working speed: 20 m/min Machine Equipment: Pedpfsv D Rhuex Afwerd - Pre-milling unit with diamond tools - End trimming unit with automatic tilting (15° inclination) - Milling and copying units with automatic adjustment - Edging system with PUR glue option - Top and bottom spraying system for cleaning and maintenance of workpieces - Rounding and buffing units for final edge finishing - ICOS open control system with touchscreen display

Sąlyga: naudotas, Gamybos metai: 2006, IMA Novimat Edge Banding Machine: Manufacturer: IMA Model: Novimat Concept/I/G/80/650/R3 Year of manufacture: 2006 Machine number: 08113 Nominal power: 41 kW Workpiece feed: Glide chain Fence ruler: Adjustable fence ruler 700.080 Infeed table: 63.152 Milling unit: 08.378 Glue level sensor: Available Glue application unit: 04.0832 Bonding unit: 04.1570 PU premelter: 283.203 High-speed tool holder: For high-speed motors End trimming unit: 08.42 Milling unit: 08.0555 Multi-processing unit: 08.348 Multi-profile scraping device: 08.516 Flat scraper: 08.517 Profile copying buffing unit: 08.604 Buffing unit: 08.617-4 Safety equipment: Light barriers, temperature controller, control terminal Additional equipment: Pre-mounted roller conveyor table Total machine length: Approx. 11 / 16 m Extraction system: Included Accessories: Edge magazines: 2 sliding magazines for edging coils, each for 12 rolls, mobile Plasma edge heating (PLASMATREAT Düstec): 2 plasma units Control cabinet Panel return system (Manufacturer: VENJAKOB): Components: 7 belt conveyor tables, belt width approx. 100 cm, various table lengths Round belt conveyor table Podpornkw Djfx Afwsrd Control cabinet system 2 angular transfer tables Peripheral stations for edge processing line: Consisting of: Interface system Barcode scanning system

Gamybos metai: 1999, Sąlyga: paruoštas naudoti (naudotas),

Sąlyga: geras (naudotas), DC motor, servo motor, gear motor, electric motor, DC gear motor, DC shunt gear motor -Manufacturer: Kählig, DC gear motor -Type: M63x60/I + SN31 + IGM4/2 -Voltage: 110V -Torque: 324 N/cm -Speed: 120 rpm -Technical data: see type plate photo -Shaft: Ø 10 x 25 mm Prjdsrwqbvspfx Afwjd -Quantity: 15 motors available -Price: per unit -Dimensions: 220/90/H100 mm -Weight: 2.6 kg/unit

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2012, Tabelle Außenlänge: 500 mm Außenbreite: 500 mm Prsdpfxjwpmdzs Afwod Zusätzliche Ausstattung Fugenfräsaggregat: 2 Motoren, je 4,0 kW, 8.800 U/min Heizgerät: Vorwärmung der Werkstückkanten bis zu 60 mm Leimauftragsstation: Verarbeitung von Kantenmaterial bis 3 mm Kappaggregat: 2 Motoren, 660 kW Weitere Aggregate: Fräs-, Multifunktionsfräs-, Konturenfräs-, Mehrprofilziehklingen- und Ziehklingenaggregate; Polieraggregat Automatischer Quickmelt-Heißleimzuführer Rückführsystem mit angetriebenen Rollbahnen, Querförderer, Transportband, Eckenumsetzer, Luftkissentischen und Schutzeinhausung Diese IMA Novimat Concept / I / G80 / 440 / R3 Kantenanleimmaschine wurde 2012 gefertigt. Sie verfügt über ein robustes automatisches Kantenanleim- und Nachbearbeitungssystem mit integriertem Werkstückrückführsystem für erhöhte Produktivität. Sie ist für Kantenmaterialien von 0,3 mm bis 3 mm und Werkstückstärken bis 60 mm geeignet. Ausgestattet mit einem pneumatischen Schnellspannsystem und elektronischer Temperaturregelung für präzisen Leimauftrag. Nutzen Sie die Gelegenheit, diese IMA Novimat Concept / I / G80 / 440 / R3 Kantenanleimmaschine zu erwerben. Kontaktieren Sie uns für weitere Informationen. Anwendungsgebiete Kantenanleimen

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 006089, Type of applied edge: thin edge, thick edge, solid wood Glue system: EVA Premilling: yes Multifunction unit: yes Maximum feed speed: 30 m/min Maximum panel thickness: 60 mm Prodpfsim S Hqsx Afwod Working units: 8 pcs

Sąlyga: naudotas, tuščias svoris: 5 580 kg, didžiausias leistinas svoris: 30 420 kg, bendras svoris: 36 000 kg, ašių konfigūracija: 3 ašys, pirmoji registracija: 06/1988, krovimo vietos ilgis: 12 700 mm, krovinių skyriaus plotis: 2 480 mm, krovos erdvės aukštis: 1 000 mm, bendras ilgis: 2 500 mm, bendras plotis: 4 000 mm, pakaba: oras, padangos dydis: 9.5R17.5, spalva: pilkas, rida: 1 001 km, pavaros tipas: kitas, vairuotojo kabina: kitas,

Sąlyga: naudotas, Norgren I374997 Predpfx Afst T Hlkjwsd

Sąlyga: naudotas, Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, pjovimo ilgis (maks.): 8 mm, Įranga: kabina, Complete Artiglio log saw with Eagle 1100/I carriage. Maintenance was carried out by Artiglio in 2018. It is in excellent condition. Pedpfjv Sr U Eox Afwjrd

Sąlyga: naudotas, Gearbox, bevel gearbox, spur gear gearbox, bevel gearbox, reduction gearbox - Transmission ratio: i = 1:1 - Drive shafts: See images for dimensions - Dimensions: Ø 225 x 180 mm - Weight: 9.6 kg Pjdpjft Aicsfx Afwsrd

Sąlyga: visiškai atnaujintas (naudotas), Single-Sided Edgebanding and Edge Processing Machine (Left) Edgeband Material (Roll) Thickness (min/max) mm: 0.3 - 3 Edgeband Thickness for Strips/Slats (min/max) mm: 1 ALU Panel Thickness (min/max) mm: 6 - 55 Control/Software: IMATRONIC 121 /01 Feed Speed (adjustable) m/min: 6 - 30 FORMATTING PROCESSING: Jointing Cutter Unit with CNC Control 08.376 (2 x 4.5 kW) Sprayer Unit (for liquid release agent) EDGEBANDING SECTION: Lamps for edge heating of workpieces Gluing Unit (PUR glue + pre-melter) 04.1569 Edge Pressure Zone mm: 1000 + edgeband magazine for rolls (compartment No. 6) End Trimming Unit 08.42 (2 x 0.66 kW) Working Speed 25 m/min (0–25°) Pedpocr T N Dsfx Afwsrd Pre-Milling Unit 08.0555 (2 x 1 kW) Milling Unit 08.055 (2 x 1 kW) 0°–30° + Sprayer Unit (for sliding fluid) Contour Milling Unit (for fine trimming) CNC Controlled 08.348 (2 x 0.66 kW) Multi-Profile Scraper Unit (CNC controlled) 08.516 Flat Scraper Unit 08.517 (Pneumatic) + Sprayer Unit (for polishing fluid) Buffing Unit 08.614 (2 x 0.25 kW) Universal Milling Unit for Grooving, Rebating and Profiling 08.183 (1 x 3 kW) Smoothing Unit 08.53 Radius Sanding Unit for Straight Edges WI (4 x 0.75 kW)

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 005657, Pridedamos briaunos tipas: plona briauna, stora briauna Klijavimo sistema: PUR Sujungimo frezavimas: taip Multifunkcinis agregatas: taip Viršutinis frezavimo agregatas: taip Maks. tiekimo greitis: 30 m/min Maks. plokštės storis: 60 mm Darbo agregatai: 13 vnt. Predpfx Aowcx Tuefwsd

Sąlyga: geras (naudotas), DC motor, servo motor, geared motor, electric motor, DC geared motor, DC compound geared motor - Manufacturer: Kählig, DC geared motor - Type: M63x60/I+SN31+IGO500/2 - Voltage: 40 V - Torque: 324 N/cm - Speed: 200 rpm - Technical data: see rating plate photo - Shaft: Ø 10 x 27 mm - Quantity: 11 motors available - Price: per unit Predpotpyq Asfx Afwjd - Dimensions: 210/90/H100 mm - Weight: 2.6 kg/unit

Sąlyga: labai geros būklės (naudotas), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 / 3 Panel thickness (min/max) mm 8 / 60 Control system ICOS Open Feed speed m/min (adjustable) 16 - 30 Podpfxed Scyde Afwsrd Top pressure driven by V-belt Spray unit (for liquid anti-adhesive) Adjustable fence, CNC controlled Jointing cutter unit with CN-controlled 08.379 (Kw 4.0 x 2) Edge pressure zone (CN-controlled) Gluing unit (P.U.R. glue + pre-melter) VTG + 283.203 Edge magazine for rolls (compartment No.) 6 End trimming unit 08.42/30/B (Kw 0.2 x 2) max 30 m/min (0°-25°) Milling unit 08.0587 (Kw 1.0 x 2) 4 profiles Multi-function unit (radius milling and contour trimming unit) KFA 20 (Kw 0.5 x 1) max 25 m/min Profile scraper unit 08.516 (4 profiles) Flat scraper unit 08.521 Spray unit (for polishing fluid) Buffing unit 08.617-4 (Kw 0.18 x 4) Universal milling unit for grooving/rebating and profiling 08.190 (Kwv 4.5 x 1) 90°/180°/270° CNC

Sąlyga: beveik kaip naujas (parodų įrenginys), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness for rolls (min/max) mm 0.3 / 3 – for strips mm max 1 Panel thickness (min/max) mm 8 / 60 (Laser – max 44) Control ICOS Open Feed speed m/min (adjustable) 16 – 30 Top pressure driven by V-belt Spraying unit (for liquid non-stick) Adjustable fence, CNC controlled Panel infeed system 700.101 (mm 500 x 500) Jointing cutter unit with CNC control 08.379 (Kw 4.0 x 2) Edge pressing zone (CNC controlled) Gluing unit (P.U.R. adhesive + premelter) 04.0836 + 283.1518 (edge feed servo motor) adjustable via CNC Glue application unit (premelter with laser) Laser System IMALUX Spraying unit (for separating agent) Podpfjgbug Nox Afword Pressure zone + edge magazine for rolls (compartment No.) 6 Cross-cut saw unit Linear 08.428 LKA V30/2 (Kw 0.2 x 2) speed up to 30 m / min (0° - 25°) Multi-profile milling unit (CNC controlled) 08.0587 (Kw 1.0 x 2) 4 profiles Contour milling unit (for fine milling) CNC controlled KFA 20 (Kw 0.5 x 1) max 25 m/min Profile scraper unit DUO (4 profiles) Flat scraper unit 08.521 Spraying unit (for polishing fluid) Buffing unit 08.617-4 (Kw 0.18 x 4) Universal milling unit for grooving/rebating and profiling 2x08.190 (Kw 4.5 x 2) 90°/180°/270° (CNC)

Sąlyga: labai geros būklės (naudotas), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness in strips (min/max) mm: 0.8 / 20 Panel thickness (min/max) mm: 8 / 60 Control: ICOS Open Compact Feed speed m/min (adjustable): 6 - 30 Top pressure: belt-driven Adjustable guide fence: CNC-controlled Jointing unit with CNC-controlled 08.376 (Kw 4.5 x 2) Lamps for heating the workpiece edge Gluing unit (Hot Melt + Pre-melter) 283.1513 + 283.201 Edge pressure zone Edge magazine for rolls (compartments No.): 1 Podoidqphspfx Afword End trimming unit 08.42 (Kw 0.66 x 2) max 30 m/min, 0°-25° Milling unit 08.055 (Kw 1.85 x 2) 0°-30° Sprayer unit (for sliding fluid) Contour milling unit (for fine milling) CNC-controlled 08.348 (KW 0.66 x 2) 4 profiles Profile scraping unit 08.516 (4 profiles) Flat scraping unit 08.50 Sprayer unit (for polishing fluid) Buffing unit 08.612-2 (Kw 0.25 x 2) Universal milling unit for grooving, rebating, and profiling 08.183 (Kw 3 x 1)

Sąlyga: labai geros būklės (naudotas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Roll material (edges) thickness (min/max) mm: 0.3 / 3 Veneer edge application possible up to max. 1.0 mm (with limitations) Panel thickness (min/max): 8 mm – 40 mm (with MFA) / 60 mm (without MFA) Control / Software: ICOS Open Feed speed (adjustable) m/min: 6 – 30 Upper pressure system with motorized timing belt Spraying unit (for liquid anti-adhesive) Adjustable stop ruler Jointing unit - 08.378 (2 x 4.5 kW) Gluing unit (hot melt adhesive) 04.1570 Pressure zone Edge magazine for rolls (compartment no.): 2 End trimming unit 08.42/30/B (2 x 0.66 kW) 0°-25° (max. 30 m/min) Milling unit 08.055 (2 x 1 kW) 0°-30° Multifunctional unit (radius milling and contour milling unit) 08.342 NC-controlled (2 x 0.66 kW) servo Profile scraper unit 08.519 Flat scraper unit 08.50 Buffing unit 08.617 (2 x 0.25 kW) Pjdper Ttfljfx Afwsrd Universal milling unit for grooving, rabbeting, and profiling 08.190 (1 x 4.5 kW)

Sąlyga: labai geros būklės (naudotas), FLEXIBLE BATCH SIZE-1 PRODUCTION AND SINGLE-SIDED EDGE BANDING & FORMATTING LINE Comprising the following machines: M.01) LOADING TABLE AND AUTOMATIC WORKPIECE RETURN SYSTEM "SIRIO" BATCH SIZE ONE M.02) SINGLE-SIDED (right) FORMATTING AND EDGE BANDING MACHINE "IMA" Novimat I/R75/690/R3 Panel thickness (min/max) mm 8 / 60 - Working width (min/max) mm 200 / 1300 Edge material (rolls) thickness (min/max) mm 0.3 / 3 Control/software ICOS Open (Batch Size One) Feed rate (adjustable) m/min 6 - 30 Pjdpekt Uuasfx Afwerd Fully automatic panel infeed system for formatting A1 / 15 No. 2 jointing milling units, NC controlled 08.378 (4 motors x 4.5 kW) Gluing unit (Hot melt glue + pre-melter) VTG + 283.205 Edge magazine for rolls (24 positions) End trimming unit 08.42 / 30 / B / LS1 (2 x 0.2 kW) 0°-25° Pre-milling unit 08.055.0.1680 (1 x 0.85 kW) Multi-profile milling unit (NC controlled) 08.0587 HS/LS1 (2 x 1 kW) Contour milling unit (for fine trimming) NC controlled KFA x20 (1 x 0.5 kW) 20 m/min Multiple profile scraper unit (NC controlled) 08.516 HS/LS1 Flat scraper unit 08.521 Buffing unit 08.617-2 (2 x 0.18 kW) No. 3 universal milling units for grooving, rebating and profiling 08.190 (3 x 4.5 kW) NC controlled - 90°/180°/270° M.03) FEEDING AND STACKING SYSTEM "SIRIO"

Sąlyga: labai geros būklės (naudotas), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 / 3 - in solid strip mm max 1 Panel thickness (min/max) mm 14 / 60 (LASER - Max 50) Control ICOS Open Feed speed m/min (adjustable) 6 - 30 Top pressure driven by V-belt Spray unit (for liquid release agent) Adjustable stop ruler CNC controlled Panel infeed system Jointing milling unit with CNC control 08.378 (2 x 4.5 kW) Prjdpfx Afoi Hn Srjwed Edge pressure zone (CNC controlled) Gluing unit (PUR glue + pre-melter) 283.201 + 283.203 Gluing unit (pre-melter with laser) Laser System LASERLINE Spray unit (for separating agent) Pressure zone + edge magazine for rolls (compartments no.) 36 + 12 End trimming unit 08.428 (0.2 kW x 2) Speed up to 30 m/min (0° - 25°) Pre-milling unit 08.0555 HS/LS1 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 1) 4 profiles Contour milling unit (for fine milling) CNC controlled KFA 30 (0.5 kW x 1) max 30 m/min Multi-profile scraper unit (CNC controlled) 08.0516 (4 profiles) Flat scraper unit 08.521 Spray unit (for polishing liquid) Buffing unit 08.614 (0.25 kW x 4) Universal milling unit for grooving/rabbetting and profiling 2x08.190 (4.5 kW x 2) 90°/180°/270° (CNC)

Sąlyga: labai geros būklės (naudotas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 - 3 Panel thickness (min/max) mm 8 - 60 Control system: ICOS open compact Prsdpfxeltmnle Afwed Feed speed m/min (adjustable) 6 - 30 Top pressure belt-driven, spraying unit (for liquid anti-adhesive) Panel infeed system A1 / 15 Adjustable guide fence CNC-controlled. Panel infeed system Barcode reader Jointing milling unit with CNC control 08.379 (2 x 4.0 kW) Radiator for edge heating of workpieces Gluing unit (P.U.R. glue + premelter) VTG + 283.203 Edge pressing zone. Edge height adjustment – CNC-controlled. Edge magazine for rolls (compartment no.) 12 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°-25°) 30m/min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC-controlled) 08.0587 (0.66 kW x 2) 4 PROFILES HSK 25 Spraying unit (for sliding liquid) Contour milling unit (for fine milling) CNC-controlled KFA x30 (0.5 kW x 1) 30m/min Multi-profile scraper unit (CNC-controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 Spraying unit (for polishing liquid) Buffing unit 08.617 (0.18 kW x 4). Open space Universal milling unit for grooving/rabbetting and profiling 08.190 (4.5 kW x 1)

Sąlyga: labai geros būklės (naudotas), SINGLE-SIDED FLEXIBLE EDGE BANDING MACHINE INSERT FOR LOT 1 Edge thickness in rolls (min/max) mm 0.3 - 3 Panel thickness (min/max) mm 8 - 60 Control ICOS open Feed speed m/min (adjustable) 7-35 Top pressure belt driven, spraying unit (for liquid anti-adhesive) Adjustable stop ruler CNC controlled. Panel infeed system A2 / 30 Jointing milling unit with CNC-controlled 75.34 (2 x 6.6 kW) Gluing unit (P.U.R. glue + pre-melter) 2 - VTG 3-48 + 286.205 Edge pressure zone. Edge height adjustment – CNC controlled. Edge magazine for rolls (compartment no.) 48 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°-25°) 30 m / min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 2) 4 PROFILES Sprayer unit (for sliding fluid) Contour milling unit (for fine milling) CNC controlled KFA x30 (0.5 kW x 1) 30 m/min Multi-profile scraper unit (CNC controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 (CNC controlled) Pjdpfx Afoifnzdjword Sprayer unit (for polishing fluid) Buffing unit 08.617 (0.18 kW x 4) No. 3 Universal milling units (CNC controlled) for grooving/rebating and profiling 08.190 (4.5 kW x 2 + 6.6 kW x 1)