Dūmų I Traukimo pirkti naudotą (56 729)

Gamybos metai: 1999, būklė: geras (naudotas), DISA dust extractor, welding fume extractor, self-cleaning cartridge filter, pneumatic, vacuum type for plasma, laser, sandblasting, soda blasting, shot blasting, plastics and catalysts, mineral processes, and all types of dry dust. The filter is cleaned pneumatically with compressed air pulses during operation, ensuring high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Highly durable filter cartridges, moisture-resistant. Aluminized, antistatic, operating temperature up to 135°C. Fan power: 11 kW Capacity: up to 8,000 m³/h Cjdpfx Aaehqd Tvs Djha Vacuum: up to 4,300 Pa Filtration area: 128 m²

Būklė: labai geros būklės (naudotas), filtravimo plotas: 50 m², siurbimo galia: 650 m³/val, neigiamas slėgis: 38 000 Pa, High-pressure fume extraction unit, dust extractor, TEKA self-cleaning filter. Filter suitable for plasma and laser applications. Due to its design, the system is especially recommended for processing oily, sticky fumes, as well as dusts. The unit is equipped with an automatic cartridge filter impregnation system and an activated carbon filter to neutralize odors generated during processing. The filter is pneumatically cleaned with compressed air pulses during operation, resulting in high efficiency of the unit. The extraction system is intended for specialized applications where the filtered fumes and dusts may be moist and adhesive. The addition of impregnating agent captures moisture from the fumes, thereby protecting the filters from clogging. In this case, the service life of the cartridge filters is extended. After the cleaning process, the controller sends a pulse to a solenoid valve located on the top lid of the barrel filled with powder. Chedpfxerhidme Aa Dja The applied magnetic pulse agitates the impregnating powder, which is then transported into the suction pipeline. The powder coats the working surface and forms a protective layer on the filters. The unit is like new – it has only 126 operating hours!!! 7.5 kW turbine in a sound-absorbing enclosure with noise silencer. Capacity: 650 m³/h at a vacuum of up to 38,000 Pa!! Filter area: 50 m² Inlet diameter: 100 mm Supplied with pneumatic slide valve, noise suppressor, and partial pipework.

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, siurbimo galia: 1 100 m³/val, Welding fume extraction, dust extraction, self-cleaning, pneumatic operation with vacuum filter. The unit is designed for extraction and purification of dry dust generated during welding, grinding, polishing, casting, and cutting of metals and plastics. It features a three-stage filtration system with integrated main filter cartridge regeneration. Contaminated air is filtered through a metal pre-filter (spark arrester), a primary filter cartridge, and an exhaust filter with activated carbon-impregnated fleece. The main filter element regeneration system uses compressed air to clean the filter cartridge from accumulated contaminants and is equipped with its own 10-liter compressed air tank. The device is recommended for applications requiring continuous extraction and filtration of air pollutants. Extraction arms with a reach of 3 or 4 meters are recommended as accessories. Chedpfonabuzox Aa Dja The EC-model shown features the following specifications: - Fan equipped with a brushless EC motor and 0.78-kW inverter, sound-insulated. - State-of-the-art next-generation EC motor – offers energy efficiency, precise speed control, and quiet operation. - Reliable induction motor – provides a durable and dependable solution that ensures high performance and trouble-free operation even in demanding environments. - Maximum capacity: 1,100 m³/h - Automatic filter cartridge cleaning - Self-supporting extraction arm (L = 3.0 m, d = 160 mm, hood 315 mm) Three-stage filtration: • Coarse pre-filter (30% metal, G2) • Main cartridge filter with 99% efficiency for particles ≥ 0.5 μm • Coarse exhaust filter (70% activated carbon, G4) - PTFE membrane filter (filtration class F9) - Coarse dust container below the pre-filter - Grid and dust collection container below the main filter - Welded steel housing with powder coating - Noise level: 64 dB(A) - Various configurations available to meet customer requirements Application areas: - Welding shops - Metalworking industry - Grinding and polishing stations - Plastics processing and machining This unit is ideal for areas that require constant and effective filtration of dry dust from the air. Manufactured in Poland. The price indicated refers to the unit shown. Machine warranty: 12 months.

Būklė: naudotas, Gamybos metai: 2012, įvesties srovės tipas: trifazis, filtravimo plotas: 62 m², siurbimo galia: 2 500 m³/val, neigiamas slėgis: 9 000 Pa, Dust extractor, welding fume extractor, self-cleaning pneumatic filter, vacuum dust collector, absorber for plasma, laser, sandblasting, and all types of dry dust. The filter is cleaned pneumatically by pulses of compressed air during operation, which ensures high device efficiency. Large filtration area requiring minimal space. High mechanical stability of the filter material ensures long service life. Compared to conventional rigid filters, it results in minimal pressure loss. Short compressed air pulses during the filtration process provide effective filter cleaning. Fan power: 7.5 kW Capacity: 2,500 m³/h at up to 9,000 Pa pressure Filter cartridges: 11 pcs. Cedjxrpmzepfx Aa Dsha Filtration area: 62 m² The device is equipped with an automatic cartridge filter impregnation system. The extractor is designed for special applications where the filtered fumes and dust may be moist and sticky. Impregnation agent dosing captures the moisture from the fumes, allowing the filters to be protected from clogging. In this case, the lifespan of the cartridge filters is extended. Stock no.: 0981

Būklė: naudotas, Gamybos metai: 2014, filtravimo plotas: 150 m², siurbimo galia: 15 000 m³/val, The WELDEX FT series of filtration towers has been specifically designed for the efficient removal of welding fumes in manufacturing facilities. These units are primarily intended for extracting contaminated air during the welding of large or complex metal components where source capture is impractical. Fine particulates are separated by class M filter cartridges, while the filters are automatically cleaned during operation using pulsed compressed air (pulse-jet cleaning). The WELDEX FT filtration tower is positioned centrally within the work area. Fume-laden ambient air is drawn into the upper section of the unit from the entire surroundings, filtered, and then draught-free, cleaned air is recirculated back into the hall via two side outlets. The three-part dust collection drawer gathers separated contaminants from the pre-separator and filter chambers. Welding fume extraction for production halls (workstation ventilation systems) Ideal for all working environments where selective extraction is not practical: • Metal industry • Mechanical engineering • Automotive industry • Vehicle construction • Aerospace Csdpfexg Ickex Aa Deha • Shipbuilding • and more Powerful welding fume extraction for production sites No ductwork installation required Easy to install – ready for immediate use Durable, cleanable filter cartridges = low operating costs Efficient welding fume capture utilizing thermal lift from the welding process Compact design = minimal space requirements Flexible application = deployment location can be changed at any time Brand: ESTA Model: WELDEX FT-150 Specifications: • Motor power: 11 kW • Capacity up to 15,000 m³/h • Vacuum: 2,000 Pa • Filtration area: 150 m² • Weight: 1,400 kg • Year of manufacture: 2014 Dimensions: • Width: 2.10 m x 1.40 m • Height: 3.65 m Stock No.: 1031

Būklė: geras (naudotas), Sandėlio numeris: 3108 Gamintojas: TEKA Pagaminimo metai: 2012 Darbo valandos: 5.618 h Tipas: Strongmaster IFA Numeris: 6907210061062 Oro srautas: 3.000 m³/h Ištraukimo strėlė apie: 3.000 mm Įranga: mobilus Chodey T Uxnepfx Aa Doa Priedai: naujas filtro elementas Jungtis: 1,1 kW 400 V Svoris: 160 kg Matmenys: 800 x 800 x 1.500 mm be žarnos Žarnos ilgis: apie 4.000 mm

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 18133-00 12632868, įėjimo įtampa: 400 V, Nederman ventilation unit for extraction of paint dust, oil mist, and contaminated air Cjdpfxjw Hw Dge Aa Dsha

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, įėjimo įtampa: 400 V, galia: 0,75 kW (1,02 AG), Parduodamas geros būklės, mažai naudotas suvirinimo dujų ištraukėjas ir garso izoliacijos korpusas. Įrenginys visiškai veikiantis ir gali būti išbandytas. Kaina – pagal užklausą. Cjdpfxsyk Snmj Aa Djha

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, Complete module for supplying two welding workstations with integrated welding fume extraction by Teka (welding fume separation class W3, with automatic filter cleaning) for steel applications. Mobile unit. Small tools (Bosch, Makita, or Milwaukee) can be attached to the mount (see image 4). Alternatively, extraction units from Nedermann, Kemper, Denios, Valco, Vaupel, Plymovent, and other brands can be installed for an additional charge. Delivered fully assembled, including: - 1 frame rack Cjdpjuud Irsfx Aa Doha - 2 boom arms AGA 2020 - 1 tool cabinet - 1 gas cylinder holder - 2 power cable reels - 2 compressed air hose reels The welding workstation is suitable for TIG, MIG, and MAG welding machines from manufacturers such as Fronius, Clos, Rehm, Migomat, Esab, Lorsch, Ideal, Kemppi, and many more! The welding table shown in images 5 & 6 is available for purchase separately. Currently, a return unit and a used welding workstation (SAP) are available. – We look forward to your inquiry!

Gamybos metai: 2017, būklė: labai geros būklės (naudotas), Stock number: 2727 Manufacturer: ESTA Year of manufacture: 2017 Cedpfxjlt Uinj Aa Dsha Model: KAF 100 Serial number: 16002366 Airflow rate: 700 m³/h Max. negative pressure: 1,100 Pa Connection diameter: 50 mm Features: mobile Accessories: see image, including laboratory extraction arm Connection: 0.55 kW, 230 V Weight: 42 kg Dimensions: 485 x 485 x 920 mm (without hose)

Būklė: naudotas, Čia siūlome suvirinimo dūmų ištraukimo įrenginį Euromate. Dėl pasiūlymo kreipkitės į mus. Codpexz R Aisfx Aa Djha

Būklė: naujas, Airflow rate: 1600 m³/h Separation efficiency: 99.9% Extraction hose length: 3,000 mm Motor: 230 Volt Motor power: 1.1 kW Weight: 80.0 kg Dimensions (L x W x H): 580 x 580 x 900 mm Description: Codjxaal Rjpfx Aa Djha The newly developed filtoo filter unit from TEKA is a mobile filtration system suitable for a variety of applications involving the filtration of fumes, dusts, and gases. It is also ideal for high-alloy steels (stainless steel). The device has been tested according to DIN EN ISO 15012-1 (2005) and is IFA (formerly BGIA) certified (IFA No. 201020469/1140) for welding fume class "W3" (separation efficiency: >99.9%). Where can the SIG 230 filtoo be used? - At welding workstations - In workshops - For soldering applications - For restorers - In metalworking shops Equipment: - BGIA-certified extraction and filtration unit IFA 1005030 for extraction from high-alloy steels and non-ferrous metals - Operating manual in German Optional equipment at additional cost (recommended): - Retrofit kit STAVO (pre-separator for dust) - For FILTOO with spark protection and collection tray Note: - Device is to be used solely for extracting dry dusts/fumes - Read the operating manual before initial commissioning

Būklė: naudotas, Welding fume extraction unit for wall mounting, Extraction device KEMPER type 85400 Serial no. 279092 Year of manufacture: 1997 Air flow rate: 1,700 m³/h Static pressure: 2,000 Pa Extraction connection: Ø 250 mm Motor output: 1.5 kW Power supply: 400 V, 50 Hz - Radial fan - Designed for mechanical air filter with approx. 99% separation efficiency - Main filter defective (additional charge for new main filter: €195 net) - Articulated extraction arm Ø 150 mm, approx. 2 meters long - Extraction arm with 3 joints and extraction hood (adapter connection to filter housing missing) - External control system missing, no filter monitoring, no start switch - Air outlet: 250 x 140 mm Space requirement (L x W x H): 680 x 660 x 1100 mm Cjdpsu S Tfgsfx Aa Doha Weight: approx. 120 kg Good condition Additional charge for new main filter: €195 net

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1991, Airflow: 1500 m³/h Cjdpfx Ajwx H Dyja Doha Drive motor: 380 V, 2850 rpm, 1.5 kW Extraction pipe diameter: 140 mm 3-meter sections with 3 joints, height-adjustable Suction hood with throttle valve Required space: 1150 x 600 x approx. 2300 mm Weight: 175 kg

Būklė: naudotas, Gamybos metai: 1987, Tūrio srautas / Ilgis / mm / Aukštis / mm / ESTA 100 ištraukimo ventiliatorius Csdeyrt A Ujpfx Aa Djha

Būklė: geras (naudotas), Manufacturer: Fume Extractor Top filter: 280 x 280 x 20 mm Middle filter: 270 x 270 x 230 mm Bottom filter: 280 x 280 x 30 mm Filter chamber: 360 x 360 x 270 mm Connection diameter: 45 mm Chodpfjduiu Sex Aa Dea Power: Connection: Accessories/Equipment: mobile (on casters) Condition: good Weight: 0.1 t Dimensions: 400 x 630 x 750 mm

Būklė: naudotas, Gamybos metai: 1988, Suvirinimo dūmų ištraukimo įrenginys, gamintojas ESTA, modelis SRF - 2000, pagamintas 1988 m. Paruoštas naudojimui. Chsdsu Hlppspfx Aa Dja

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, bendras svoris: 14 kg, bendras plotis: 245 mm, bendras ilgis: 420 mm, bendras aukštis: 450 mm, įėjimo įtampa: 230 V, triukšmo lygis: 59 dB, garantijos trukmė: 12 mėnesiai, tūrio srautas: 420 m³/val, Įranga: Tipinė plokštelė prieinama, važiuoklė, Fume extraction unit with remote control and extraction hose Air inlet interface: ρm flange Max. power: 300W Air velocity: 24 m/s Cedpfx Aoxt Dq Roa Dsha Filtration efficiency: 0.3 µm / 99.97% Noise level: 59 dB Extraction hose length: 1.5 m, inner Ø 30 mm System airflow: approx. 420 m³/h Dimensions: L420 x W245 x H450 mm Weight: 14.0 kg Application: This product is suitable for environments subject to air pollution, such as fumes, unpleasant odours, dust, toxic and harmful gases generated during soldering, laser marking and engraving, printing, etc. • Extraction unit for workplace use • Separate, replaceable fine dust pre-filter M5 • Large HEPA H13 filter area, 2.4 m², for optimum particle filtration and extended filter life • Activated carbon for effective gas purification • Portable extraction unit for flexible placement directly under or next to the workstation • Simple filter replacement • Variable power control with 10-step, percentage-based speed adjustment • Health protection through electronic filter monitoring and filter alarm • Long service life due to high-quality EC blower • Fast, simple and stable installation thanks to Easy-Click system

Būklė: naudotas, Flow rate / Length / mm Height / mm Codpfx Ajwgi S Aoa Doha Total power requirement / kW Machine weight approx. / t Space requirement approx. / m incl. ESTA extraction arm

Būklė: naudotas, Gamybos metai: 2022, Techniniai duomenys: Procesas: 2 pakopų Filtro plotas: apie 17 m² Sulaikymo efektyvumas: >99% Suvirinimo dūmų sulaikymo klasė: W3 Ištraukimo našumas: 1100 m³/h Ištraukimo rankovės skersmuo: 150 mm Ištraukimo rankovės ilgis: 3 m Maitinimo įtampa: 3 x 400 V Chjdpfjxbflrjx Aa Dsa Variklio galia: 1,1 kW Triukšmo lygis: 70 dB(A) Matmenys, apie: 785 x 730 x 950 mm Svoris, apie: 106 kg Ypatybės: - Pagaminta Vokietijoje - Skirta mažam ir vidutiniam dūmų/dulkių kiekiui - Tinka nereguliariam ir dažnam naudojimui - Patogus filtro keitimas per techninės priežiūros dureles - Ištraukimo gaubtas sukasi ir lankstosi 360 laipsnių Komplektacija: - 3 nauji pagrindiniai filtrai (kiekvieno nauja kaina apie 330 eurų) - 7 nauji pirminiai filtrai - 2 ištraukimo gaubtai (vienas nenaudotas)

Būklė: geras (naudotas), Gamybos metai: 2018, bendras svoris: 1 000 kg, tūrio srautas: 2 000 m³/val, Herding ištraukimo įrenginys COMP 1500-8/9 SB Gamintojas: Herding GmbH Filtertechnik Modelis: Herding COMP 1500-8/9 SB Pagaminimo metai: 2018 Tipas: Pramoninis ištraukimo / filtravimo įrenginys Oro srautas: 2000 m³/h Svoris: 1000 kg Valdymas: Herding MP 12 Filtro valymas: pneumatinis impulsinis valymas Chjdeyrndtjpfx Aa Doa Įrenginio ID: 28694 Įrenginio ID: 28695 CE žymėjimas: yra Kiekis: 2

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Kemper CleanAirTower – Air Purification CleanAirTower Energy-Efficient Industrial Air Purification Based on the Displacement Ventilation Principle Cjdpfx Aaswthbvj Dsha Designed for Welding Fume Extraction in Production Halls Application Areas: - For production and storage halls with high dust levels - Workshops where localized extraction is not possible - As a supplement to point extraction systems - Environments with changing dust/fume sources Benefits/Features: - Effective energy removal using the Pinball Method and Tornado Principle - Low risk of foreign object ingress - Reduced heating costs through air recirculation and optimal air distribution - Long filter life thanks to optimized airflow management - High safety due to contamination-free dust disposal - Cost-effective installation, even as a retrofit, since no ductwork required - New head unit can be retrofitted to existing systems - Safe transport and easy installation via crane lugs - KEMPER Cloud connectivity via mobile network Technical Data: * Max. air volume flow: 6,000 m³/h * Filter surface area: 60 m² * Motor power: 5.5 kW * Supply voltage: 3 x 400 V, 50 Hz * Control voltage: 24 V DC * Rated current: 11.0 A * Sound pressure level: 72 dB(A) * Compressed air connection: 5 - 6 bar * Dimensions (W x H): 1,172 x 3,622 mm * Weight: approx. 666 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, bendras svoris: 875 kg, tūrio srautas: 2 750 m³/val, Parduodamas „Donaldson“ sausosios dulkių surinkimo įrenginys. Galingumas: Chodpfxeulgl Is Aa Dja Q 2750 m³/h, 5,5 kW. Daugiau techninių duomenų rasite nuotraukose. Būklė labai gera. Galima apžiūrėti bet kuriuo metu.

Būklė: geras (naudotas), veikimo valandos: 40 402 h, Domino DPX 1000 Laser Extraction System Domino DPX extraction systems for your CO2, fiber, and UV lasers effectively filter smoke and particle residues from laser coding processes, enhancing product performance and overall equipment effectiveness (OEE): - Contaminants invisible to the human eye are filtered from the working environment - Protects the laser system for longer service life and more reliable performance - Maintains code quality by keeping the laser lens clean Manufacturer: Domino Model: DPX 1000 Production output: 200 to 500 codes per minute Throughput (max.): 320 m³/hr (188 cfm) Vacuum (max.): 1143 mm WG Operating hours: 40,402 Dimensions (H x W x D): 1060 x 430 x 500 mm Chedpjvi E A Djfx Aa Dja Weight: 55 kg More items – new and used – available in our shop! International shipping costs on request!

Būklė: beveik kaip naujas (parodų įrenginys), mašinos/transporto priemonės numeris: 20170140, TEKA AirTracker Basic – Ambient Monitoring System Professional ambient monitoring system capable of measuring fine particulate matter, temperature, humidity, and noise pollution. More than just a particulate monitoring system! - Certified measurement sensors - Highly visible LED display indicating particulate pollution levels - Individually configurable threshold settings for particulate concentrations - Integrated TEKA-Connect - WLAN-enabled AirTracker - Control interface for ventilators or filtration systems from the TEKA product range Cjdpfx Ajv Taq Roa Djha - Display and analysis of measurement data - Readout and visualization of measurement values - Trend indicator for assessment / Data logger - Data retrieval via web interface - Flexible installation: wall, ceiling, and stand-alone unit. One device, multiple applications! - Built-in next-generation high-performance PC (MX6 dual-core) - WiFi/UART control The innovative, intelligent ambient monitoring system for the future. The European branch of the World Health Organization (WHO) has called for stricter implementation of EU air quality standards. TEKA addresses these with an innovative, intelligent solution: AirTracker air quality monitoring. The newly developed sensor of the TEKA AirTracker series detects particles smaller than 100 nanometres, granting a measurement sensitivity from 0 to 30 mg/m³ with an accuracy of ±0.1 mg/m³—documented and supplied with verification certificate. Building trust through transparency. High-tech sensors guarantee reliable measurement values and operational safety. Individually adjustable threshold and limit values pave the way for a secure working future. Once the configured threshold is reached, the sensor indicates the current fine particulate concentration status via two highly visible, large-format LED bars operating with traffic light functionality. Optionally, with the AirController, ventilators or filtration units from the TEKA product series can be automatically triggered based on dust concentration. Ready-to-go: Industry 4.0 – TEKA AirTracker. Facilities can document compliance with statutory occupational safety regulations either manually or via the optional data logger, proactively before inspections by professional associations. Staff health and preventive measures always in focus—build lasting trust. Dust, whether coarse or fine, down to nanoparticles, fine dust categories such as PM2.5 for type A dust or PM10 for type E dust—the TEKA AirTracker, featuring its newly developed sensor, monitors particulate matter within a radius exceeding 30 meters, with certified precision of +/- 0.1 micrometers—experience real safety. The TEKA AirTracker also offers additional innovative sensors as standard: ambient temperature, humidity, and noise levels are simultaneously measured. Networked sensors/actuators represent the future of Industry 4.0. TEKA is setting the standard in this field today. TEKA’s sensor and actuator technology is already a key component of modern industry. With a compatible smartphone, tablet, or PC, the TEKA AirTracker app can be downloaded to display real-time readings for ambient temperature, humidity, fine particulate concentration, and noise levels. Various configuration and functional options within the app further optimize ease of use and functionality. There are many ‘dust sensors’ available. However, only certified, networked sensors that document measurement data guarantee true quality and safety.