Carnaghi Staklės pirkti naudotą (4)

Būklė: naudotas, Gamybos metai: 2009, Faceplate diameter: 1,800 mm Swing diameter: 2,000 mm Turning height: 1,500 mm Control: SIEMENS 840 D Bledpfx Afovylils Aog Max. workpiece weight: 5,000 kg Ram dimensions: 250 x 250 mm Table speed range: 1 - 320 rpm Table drive power: 100 kW Torque: 31,784 Nm Total connected load: 218 kW Machine weight approx.: 55 t Turning and drilling heads: - 4 x turning heads + tool holders - 3 x turning heads for Capto system - 1 x driven boring head - 2 x angle drilling heads (manufacturer: Benz) Dimensions: - Turning diameter on faceplate: 2,000 mm - Faceplate diameter: 1,800 mm - Turning height with L100 turning head: 1,500 mm Ram performance: - Clamping force of tool holder or accessory: 120,000 N - Max. feed force axis Z and X: 30,000 N - Spindle drive power for milling, drilling, and grinding: 37 kW - Spindle speeds for turning operations: 10 - 3,000 rpm Travel paths: - Axis X, horizontal slide on crossbeam: -2,270 / +2,275 mm - Axis Z, vertical slide on crossbeam: 1,250 mm - Axis C, table rotation: 360° Feed rates: - Axis X: 15,000 mm/min - Axis Z: 15,000 mm/min - Axis C: 3.25 rpm Coolant system: - Coolant/filter system: 1,500 l Chain tool magazine with 80 positions: - Max. tool weight: 30 kg - Max. tool diameter with free adjacent positions: 250 mm Disc magazine with 12 positions: - Max. weight of tool holder/accessory units: 150 kg - Max. length of tool holder: 500 mm - Max. magazine load: 1,000 kg Pallet changer with 2 pallets: - Pallet diameter: 1,800 mm - Pallet load capacity (centered): 5,000 kg - Pallet load capacity (off-center): 4,000 kg Equipment / accessories: - 1x pallet with base jaw boxes, diameter 1,800 mm - 1x hydraulic chuck with base jaws, diameter 1,800 mm - Various drilling and milling heads - Various tool holders - 2x touch probes

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, Technical Details Faceplate diameter: 1800 mm Swing diameter: 2000 mm Turning height: 1270 / 1120 mm Control: SIEMENS 840 D Maximum workpiece weight: 5000 kg Ram dimensions: 250 x 250 mm Table speed range: 1 - 320 rpm Crossbeam adjustment: 400 mm Ram slide (X-axis) horizontal travel: -2770 / +2275 mm Ram slide (Z-axis) vertical travel: 1250 mm C-axis: 360° (0.001° increments) Milling drive power: 37 kW Milling speed range: 10 - 3000 rpm Table drive power: 100 kW Torque: 31,784 Nm Feed rate (X/Z): 0.1 - 15,000 mm/min Total connected load: kW Machine weight approx.: 55 t Space requirement approx.: m Additional Information Used CNC vertical turning lathe for turning, drilling, and milling operations. The machine was first commissioned in 2011. CNC control: Siemens Sinumerik 840 D Number of NC axes: 4 (X, Z, C, crossbeam movement) Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Spindle speed range: 1.0 - 320 rpm Spindle drive power: 100 kW Drilling-milling spindle: 37 kW Crossbeam travel: 2 steps of 200 mm each Total electrical connected power: 218 kVA Travels: X-axis: -1650 to +2165 mm Z-axis: 1250 mm Rapid traverse X/Z-axis: 15 m/min Number of tool magazine positions: 80 stations in chain magazine (60 x HSK 100, 20 x Capto C6) Disk magazine for 12 turning toolholders and attachments Coolant system with filtration and recirculation unit Chip conveyor Oil mist extraction unit 1 pallet with jaw boxes, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads Bodpsyzy Tyefx Af Aolg 2 measuring probes Several turning toolholders Special feature: Pallet changer with two stations, equipped with a faceplate Ø1800 mm and a six-jaw lever compensating chuck with mechanical centrifugal force compensation, Ø1800 mm. Note: The machine is installed in a pit. Condition description: About half a year ago, the cross-roller bearing on the Carnaghi was replaced. All Siemens components in the control cabinet were also completely renewed at the end of 2023. The machine is equipped with a probe for tool measurement and an external Renishaw probe for workpiece measurement. As a special feature, the machine has a probe mounted on the Z-axis (Z1 axis). This provides both increased accuracy and time savings, as there is no need to remove the tool for measurement. However, this probe is currently deactivated and should be overhauled before recommissioning. Additionally, the machine has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely renewed in 2020/21.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1997, MODELU.M. TG20/2500 CNC SIEMENS 840 C TEKINIMO SKERSMUO 2500 mm STALO SKERSMUO 2000 mm TEKINIMO AUKŠTIS 2000 mm MAKS. SVORIS ANT STALO 20000 kg MAKS. STALO GREITIS 2-250 aps./min. ĮRANKIŲ KEITIKLIS 10 VNT. STALO VARIKLIS 60-100 kW C AŠIS Blsdsxwp D Depfx Af Aeg RAMO PROFILIS 250x250 mm GREITOS EIGOS 10000 mm/min FREZAVIMO GREITIS 0-4000 aps./min. VAROMI ĮRANKIAI SVORIS 46000 kg

Būklė: naudotas, Gamybos metai: 1997, Sukamosios plokštės skersmuo: 1200 mm Sukimosi skersmuo: 1400 mm Sukimosi aukštis: 1190 mm Valdymas: Siemens, tipas 840C Stūmoklio eiga – maks. 1250 mm Įrankių keitiklis: 12 pozicijų Stalo apkrova: 9000 kg Skersinio balkio eiga: 800 mm Sukimosi greitis: 2,5–250 aps./min. Greitas perstūmimas: 4 m/min Bendras galios poreikis: 55 kW Staklių svoris: apie 16 t Užimama erdvė: apie 3,95x3,6x5,56 m Staklių Nr.: 1096/97 Bsdpfoyqvzdsx Af Aslg Techninius duomenis pateikia gamintojas arba operatorius, todėl jie mums nėra įpareigojantys. Tarpinis pardavimas pasiliekamas; galioja tik mūsų bendrosios pardavimo ir pirkimo sąlygos. Apie mus Daugiau kaip 400 nuosavų staklių sandėlyje Daugiau kaip 15 000 m² sandėliavimo ploto, krano keliamoji galia iki 70 t Daugiau kaip 10 000 įvairių priedų jūsų dirbtuvėms Jei norite parduoti įrengimus, gamybos linijas ar savo įmonę, susisiekite su mumis. Daugiau pasiūlymų rasite mūsų interneto svetainėje. Apžiūrą galima organizuoti susitarus iš anksto. Laukiame jūsų apsilankymo, Jūsų Markus Hirsch komanda