Vertikalios tekinimo staklės - viena kolona

PIETRO CARNAGHI AC 20 TM-1800

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, Technical Details Faceplate diameter: 1800 mm Swing diameter: 2000 mm Turning height: 1270 / 1120 mm Control: SIEMENS 840 D Maximum workpiece weight: 5000 kg Ram dimensions: 250 x 250 mm Table speed range: 1 - 320 rpm Crossbeam adjustment: 400 mm Ram slide (X-axis) horizontal travel: -2770 / +2275 mm Ram slide (Z-axis) vertical travel: 1250 mm C-axis: 360° (0.001° increments) Milling drive power: 37 kW Milling speed range: 10 - 3000 rpm Table drive power: 100 kW Torque: 31,784 Nm Feed rate (X/Z): 0.1 - 15,000 mm/min Total connected load: kW Machine weight approx.: 55 t Space requirement approx.: m Additional Information Used CNC vertical turning lathe for turning, drilling, and milling operations. The machine was first commissioned in 2011. Ijdpfx Asyzy Tyoausar CNC control: Siemens Sinumerik 840 D Number of NC axes: 4 (X, Z, C, crossbeam movement) Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Spindle speed range: 1.0 - 320 rpm Spindle drive power: 100 kW Drilling-milling spindle: 37 kW Crossbeam travel: 2 steps of 200 mm each Total electrical connected power: 218 kVA Travels: X-axis: -1650 to +2165 mm Z-axis: 1250 mm Rapid traverse X/Z-axis: 15 m/min Number of tool magazine positions: 80 stations in chain magazine (60 x HSK 100, 20 x Capto C6) Disk magazine for 12 turning toolholders and attachments Coolant system with filtration and recirculation unit Chip conveyor Oil mist extraction unit 1 pallet with jaw boxes, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning toolholders Special feature: Pallet changer with two stations, equipped with a faceplate Ø1800 mm and a six-jaw lever compensating chuck with mechanical centrifugal force compensation, Ø1800 mm. Note: The machine is installed in a pit. Condition description: About half a year ago, the cross-roller bearing on the Carnaghi was replaced. All Siemens components in the control cabinet were also completely renewed at the end of 2023. The machine is equipped with a probe for tool measurement and an external Renishaw probe for workpiece measurement. As a special feature, the machine has a probe mounted on the Z-axis (Z1 axis). This provides both increased accuracy and time savings, as there is no need to remove the tool for measurement. However, this probe is currently deactivated and should be overhauled before recommissioning. Additionally, the machine has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely renewed in 2020/21.

Būklė: naudotas, Gamybos metai: 2004, Technical details: Maximum wheel diameter: 200 mm Wheel width: 60 mm Maximum module: 7 Machine weight approx.: 15 t Table diameter: 180 mm Table speed range: 100 rpm Cutter speeds: 750 rpm Well-maintained gear hobbing machine without feed/automation Iaodpfx Aajxc E H Soujr Available from 24.08.2024

Būklė: naudotas, Hydraulic Guillotine Shear STEINER Type HTS 30/20 R Machine No. 315 Year of manufacture: 1982 Cutting length: 3050 mm Cutting thickness: 20 mm Backgauge: 800 mm, motorized Iasdped Hxx Aofx Aauor Motor power: approx. 30 kW Power supply: 400 Volt, 50 Hz - Backgauge with ELGO positioning control - Backgauge adjustment via ball screw spindles - SICK safety light curtain at front for pinch protection - 3 material support arms with ball rollers - Electric foot switch - Spare blades - Oil cooler with air heat exchanger - Very heavy-duty machine with extremely robust construction Base machine space requirement (L x W x H): 4650 x 2610 x 3200 mm Base machine weight: 27,000 kg Space required for transport (base machine): 4650 x 2610 x 3200 mm Space required for transport (additional): 3500 x 2450 x 1400 mm Total weight: 27,000 kg Good condition Machine can be inspected at our warehouse in 37235 Hessisch Lichtenau; test cuts possible. Currently, the hold-downs are being resealed; the resulting price adjustment will be made in the next few days.

Būklė: naudotas, Gamybos metai: 1979, Technical Details: Swing diameter over bed: 540 mm Turning length: 630 mm Center distance: 900 mm Center height over bed: 270 mm Center height over rear slide: 138 mm Swing diameter over rear slide: 250 mm Longitudinal travel: 700 mm Cross travel: 80 / 75 mm Spindle speeds: 1.8 - 450 rpm stepless across 8 ranges Clamping diameter: 26 mm Iodpfx Asvbhv Rjausar Feed range X-axis: 12 steps / 0.063 - 0.63 mm/rev Feed range Y-axis: 36 steps / 0.070 - 1.11 mm/rev Tailstock quill: MK5 Tailstock quill stroke: 250 mm Total connected load: 7.0 kW Machine weight approx.: 3.76 t Machine dimensions approx. (LxWxH): 3.2 x 1.2 x 1.8 m Application: Primarily used for reverse turning and relief grinding of cutting tools (especially hobbing cutters with and without thread pitch). Reverse turning and relief grinding is possible from the front side, the rear side, and in the axial direction of the machine. Main drive via 8-step manual gearbox. Feed gearbox designed as 12-step manual gearbox. Rear slide swiveling range = 360° Cross slide swiveling range = 360° Chuck is a taper disc Ø 200 mm with MK5 Equipment: Mandrel Ø 49.5 x 400 mm Measuring system ARBAH-L 3+1 Frequency inverter FRENIC 5000G11 3-jaw chuck Ø 250 mm In stock. *

Būklė: labai geros būklės (naudotas), Gamybos metai: 2002, Deckel Maho DMU 80 P-Hi Dyn 5 ašių CNC apdirbimo centras Pagaminimo metai: 2002 Valdymas: Heidenhain 430 Ijdpfox Dlf Rox Aaujar X eiga: 800 mm Y eiga: 700 mm Z eiga: 600 mm B ašis: automatinė pasukama frezavimo galvutė C ašis: NC pasukamas stalas: 900x630 mm Apdirbamo ruošinio svoris: 800 kg Įrankių laikiklis: SK40 Įrankių keitiklis: 60 pozicijų Priedai: Drožlių konvejeris Vidaus aušinimas 40 bar Rankenėlė Heidenhain TS 642 jutiklis

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 804, vėjo ilgis: 2 550 mm, darbinis plotis: 2 500 mm, maks. lakšto storis: 16 mm, plieno lakšto storis (maks.): 16 mm, bendras svoris: 12 500 kg, 3-roll plate bending machine 2500 x 16 mm, hydraulic Manufacturer: KUMLA Model: PV 7 H Serial number: 804, overhauled in 1987 Iaedpevxbm Rsfx Aaujr The machine features a very robust construction and has only been used in single-shift operation. Max. bending length: 2500 mm Max. sheet thickness: 16 mm Cone bending device Top roll diameter: 324 mm Bottom roll diameter: 305 mm Hydraulic roll adjustment Dimensions: L x W x H = 5000 x 1600 x H 1900 mm Working height: 1000 mm Additionally, a stair platform can be purchased for the machine.

Būklė: geras (naudotas), Gamybos metai: 1997, TBT ML 200-2-850 Deep Hole Drilling Machine TECHNICAL DATA Model: M200-2-850 Number of spindles: 2 Drill slide travel: 850 mm Drilling method: single-lip drilling Drilling depth with: Submersible spindle: 120 mm Sealing housing: 400 mm Sealing housing with steady rest: 350 mm Spindle drive Power: 2 / 3.5 / 1.5 kW Voltage: 140 / 350 / 350 V Speed: 14 / 11 / 6 / A Feed – independent drive Feed rate: 20 – 500 mm/min Rapid traverse speed (NC mode): 12 m/min Feed force: 1.5 kN Motor torque: 2.2 Nm at 3000 rpm Tailstock Isdpevca Rcjfx Aaujar Motor power: 0.75 kW at 1000 rpm Spindle speed: 500 rpm Max travel: 200 mm Main dimensions L x W x H: 4600 x 2500 x 2100 mm Transport weight: 3200 kg Control: Sinumerik 805 M No liability is assumed for the correctness, completeness and timeliness of the information provided.

Būklė: labai geros būklės (naudotas), Tacchi HD/1450 X 4M Didelė veleno skylė (515 mm) Metai: 2002 Siemens CNC valdymas Sukimosi diametras virš staklių pagrindo: 1450 mm Sukimosi diametras virš staklių vežimėlio: 1000 mm Veleno kiaurymė: 515 mm Patronai galvutės priekyje ir gale Iaodpfexg Ivdsx Aaujr Sūkių diapazonas: 1,5 – 450 aps./min Svoris tarp centrų: 15 000 kg Baruffaldi 4 padėčių automatinis įrankių laikiklis 2 x 3 taškų lunetos

Būklė: naudotas, Gamybos metai: 2007, TECHNICAL DATA Travel X-axis: 760 mm Travel Y-axis: 510 mm Travel Z-axis: 610 mm Clamping surface of table: 1020 x 510 mm T-slots / table: 5 x 18 mm x 100 mm Distance spindle to table min./max.: 150/762 mm Spindle taper: steep taper DIN 69871 ISO 40 Ijdpfswud Afex Aaujar Spindle speeds: 10 to 10,000 rpm Drive power (30 min/continuous duty): 11 kW Max. torque: 236 Nm Constant power from 500 rpm Coolant tank: 190 l Ball bearing linear guides on X, Y, Z axes Rapid traverse X / Y / Z: 30 / 30 / 20 m/min Programmable feed rates: 3.0 - 7600 mm/min Positioning accuracy: +/- 0.01 mm Repeatability: +/- 0.005 mm Automatic tool changer (double arm): 24 Through-spindle coolant Chip conveyor

Gamybos metai: 2002, būklė: paruoštas naudoti (naudotas), Su dviem apdirbimo moduliais, X ašis: -50 iki 725 mm, Y ašis: -200 iki 300 / -250 iki 250 mm, greitas judėjimas X, Y, Z ašyse: 18/12/30 m/min, valdymas: Siemens Sinumerik, temperatūros diapazonas: 5-40°C, srovės tipas/dažnis: 3 PEN/50 Hz, vardinė įtampa: AC 400V, valdymo įtampa: DC 24V, pagalbinė įtampa: AC 230V, prijungimo galia: 102 kVA, vardinė srovė: 148A, vardinė srovė (greita): 148A, saugiklis (lėtas): 160A, ilgis: 8000 mm, plotis: 3000 mm, aukštis: 4000 mm, svoris: apie 17 t, darbo valandų skaičius: apie 80 000 h. Mašina visiškai veikianti, Z ašies rutulinio sraigto pavarą (aplinkinis sraigtas) atnaujinta 2024 m., reguliariai prižiūrėta. Su dokumentacija, valdymo spintele, hidraulikos agregatu, filtravimo elementais ir drožlių transporterių. Galima apžiūra vietoje. Iasdpfswbuyzsx Aauor