Biesse Rover 464 pirkti naudotą (319)

Sąlyga: labai geros būklės (naudotas), CNC-controlled (automatic) throughfeed drilling line, comprising: W05022F) AUTOMATIC THROUGHFEED DRILLING MACHINE "BIESSE" Techno FDT with CNC - No. 2 horizontal drilling supports (each with 2 drilling heads, each with 1.8 kW and 11 drilling spindles each); - No. 6 lower drilling supports (each with 2 drilling heads, each with 1.8 kW and various drilling heads); - No. 3 upper drilling supports (each with 2 drilling heads, each with 1.8 kW and various drilling heads); - No. 5 upper vertical workpiece clamps + No. 2 continuous screws for chip removal CNC control: NC 500 (software: Tooling System + Woodmaster) Hfodpfet Ig A Sjx Abmjr W05022G) AUTOMATIC THROUGHFEED DRILLING MACHINE "BIESSE" Techno FDT with CNC - No. 2 horizontal drilling supports (each with 2 drilling heads, each with 1.8 kW and 11 drilling spindles each); - No. 6 lower drilling supports (each with 2 drilling heads, each with 1.8 kW and various drilling heads); - No. 3 upper drilling supports (each with drilling heads of 1.8 kW and various drilling heads); - No. 5 upper vertical workpiece clamps - No. 2 continuous screws for chip removal 2nd drilling machine is connected to the NC of the 1st machine.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2009, MC Winkelaggregat HSK 63 F for angle drilling at 7 degrees Excellent condition See photos Location: ex stock 54634 Bitburg Hfsdpfjwmr Uyjx Abmsr - immediately available -

Sąlyga: naudotas, Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, BIESSE Edgebanding Machine AKRON 1440-A Automatic single-sided edgebanding machine for applying and processing straight edges using coil material (melamine, PVC, ABS, veneer) and strip material (solid wood, HPL, sliced veneers, etc.). • NC control with touch display • Automatic start of aggregate motors • Direct selection for second pass • Operating data acquisition • Software-guided maintenance TECHNICAL DATA Workpiece thickness: 10–60 mm Workpiece thickness with MFU aggregate (profile-dependent): 10–35/60 mm Edge height: 14–64 mm Edgebanding thickness (coil): 0.4–3 mm Edgebanding thickness (strip)*: 0.4–10 (12) mm Workpiece overhang: 25 mm Hedpsxzb Iijfx Abmofr Minimum panel length: 140 mm Minimum width (at 140 mm length): 85 mm Minimum width (at 250 mm length): 50 mm Feed speed: 12 m/min Extraction*: 8x port Ø100 mm Compressed air connection: 7 bar Glue pot capacity: approx. 2 kg *Depending on selected aggregates - GLUING UNIT VC-511 Applies hot-melt adhesive to the workpiece, feeds the edge material onto the workpiece, automatically cuts coil material, and presses the edge precisely onto the workpiece, ensuring perfect positioning. - END TRIMMING UNIT IN-801 For trimming the front and rear edge overhangs at 0° to 15° angles. - 2-MOTOR MULTIFUNCTIONAL PROFILE MILLING UNIT AR02 E For corner rounding and profile milling of synthetic material edges up to a maximum thickness of 3 mm. - PRE-MILLING UNIT RT02 Pre-mills the workpiece before adhesive application. Two high-frequency motors, each 1.8 kW, 12,000 rpm. - SCRAPING UNIT RB02 For post-processing thick PVC/ABS edges. - FLAT SCRAPER RC02 Unit for removing excess glue at the joint between edge and panel. Equipped with tracing rollers and a flat knife with electronic engagement. - BUFFING UNIT SZ02 For cleaning and polishing the workpiece edge using fabric buffing wheels. The unit adjusts automatically to the workpiece thickness. - SPRAY SYSTEM FOR ANTI-ADHESIVE AGENT ADZ02 Precision application of anti-adhesive agent via injectors, numerically controlled. - KIT PRO-GLUE The PRO-GLUE kit includes: • TEKNO-GLUE system for optimal adhesive application via: - Controlled glue roller contact. - Automatic retract in case of feed stop. - Automatic ON/OFF of gluing section. • REVERSE system for switching the glue roller between co-rotating and counter-rotating modes. Electrical and mechanical preparation for the use of special glue pots for POLYURETHANE glue on machines equipped for EVA. NC Axis for Fine Trimming Unit Kit for automatic adjustment of tracing rollers and tool to match edge type and thickness. Adjustment via control system. Pair of multi-profile cutters for fine trimming: bevel 25°, R=2 mm + R=1 mm, and straight profile for solid wood. NC Axis for Profile Milling Unit Kit for automatic adjustment of tracer to match edge thickness. Adjustment via control system. Function for processing corners only. NC Axis for Scraping Unit Kit for automatic adjustment of tracing rollers and tool to match edge type and thickness. Adjustment via control system.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2022, Panelinė pjovimo staklė Selco WNT 630 3800x2200 TECHNINIAI DUOMENYS: Hodpfxsv T Sdij Abmofr Maksimalus pjovimo ilgis: 3800 mm, Maksimalus pjūklo disko išsikišimas: 108 mm, Maksimalus griebtuvo atidarymas: 100 mm, Minimalūs plokštės matmenys ant pakeliamo stalo: 1830 x 915 mm, Maksimalūs plokštės matmenys ant pakeliamo stalo: 3660 x 2200 mm, Maksimalus rietuvės aukštis: 630 mm, Minimali užkrovimo storis ant pakeliamo stalo: 10 mm, Darbinio stalo aukštis: 985 mm, Stalo keliamoji galia: 5 t Užpakalinis užkrovimas ant pakeliamo stalo su varomaisiais ritinėliais ir automatinio rietuvės padėties nustatymu pradiniame taške Varomieji ritinėliai ant pakeliamo stalo pjovimo staklėms 3800 x 2200 mm su šoniniu užkrovimu

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 008250, Pozicija 1: Vienpusė briaunų laminavimo staklės BIESSE-STREAM B1 9.0 Pozicija 2: Perdavimas BIESSE-STREAM B1 9.0 Hfjdpfx Aex Dipmsbmjr Pozicija 3: Vienpusė briaunų laminavimo staklės BIESSE-STREAM B1 9.0

Gamybos metai: 2001, Sąlyga: labai geros būklės (naudotas), I am selling a Biesse line consisting of: COMIL Insider dowel - milling - grooving - dowel insertion - glue application - accessories insertion - line. Year of manufacture: 1999-2001. It is possible to sell the machines separately. Hodpfx Abjd Iv H Romofr Vibration feeder and motorized conveyors included in the offer. For more photos and details, please send an inquiry.

Sąlyga: labai geros būklės (naudotas), PANEL SAW ANGLE SYSTEM Control: OSI Plus - Optiplanning Software No. 2 powered roller conveyors, each approx. 4500 x 2200 mm Lift table (mm): 4500 x 2200 1st pusher saw with 5 grippers Rotating device (for panels) up to 90° 1st panel saw max. cutting width (mm): 4500 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Hsdpfsukhd Aex Abmjfr Variable saw carriage feed (m/min): 1 - 170 Shear for waste material reduction 2nd pusher saw with 10 grippers 2nd panel saw max. cutting width (mm): 2200 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed (m/min): 1 - 170 No. 2 front air cushion tables (mm 2200 x 1500) Automatic unloader (bridge) for cut panels: "RBO (BIESSE)" model Lifter with no. 6 stacking positions

Sąlyga: geras (naudotas), Gamybos metai: 2009, Manufacturer: BIESSE Model: UNICLAMP Hfedpfx Aowmr Tvobmer Type of machine: Mechanical Clamping System Year of manufacture: 2009 Article number: 7350171 Technical Data Quantity: 5 Clamping height: 15 - 55 mm Height: 48 mm, with quick coupling Suitable for: Biesse Additional information: * Sale unit includes 5 used Uniclamp clamping elements * Clamping elements for clamping strips, suitable for Biesse consoles with ATS tables Location: in stock at 54634 Bitburg - immediately available -

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 008030, Priklijuotos briaunos tipas: plona briauna, stora briauna, masyvo mediena Klijavimo sistema: EVA, PUR, karštas oras Sujungimo frezavimas: taip Hjdpfx Aowvq Hgebmefr Daugiafunkcinis agregatas: taip Maks. padavimo greitis: 25 m/min Maksimali plokštės storis: 60 mm Darbo agregatai: 8 vnt.

Gamybos metai: 2004, Sąlyga: labai geros būklės (naudotas), I am selling a throughfeed drilling machine BIESSE TECHNO FDT, year of manufacture 2004. Hfedpei U Apmefx Abmor Working area: X: 215 - 32,000 mm Y: max. 672 mm (horizontal spindle 24 units, 32 mm pitch) Z: Workpiece height: 9 - 65 mm Min. X distance between vertical heads: 96 mm Configuration: 4+4 motors from below 1 routing motor with pneumatic on/off stroke from below 1+1 side motors, 24 spindles / 32 mm pitch 0 motors from rear 4+4 motors from above 4 material pressure rollers from above Very good condition. Available immediately. Another BIESSE TECHNO FDT with different configuration available in a line. Price upon request.

Sąlyga: labai geros būklės (naudotas), PC control, type NC 400 No. 2 motorized through-feed conveyor belts Hsdpfx Aeidqd Tjbmsfr No. 2 horizontal drilling supports No. 2 drilling units for each horizontal drilling support Spindles per horizontal drilling unit (qty): 11 Max. working width (mm): 3200 Min. working width (mm): 205 (approx.) No. 5 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support No. 2 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling support No. 4 upper vertical workpiece clamps Chip conveyor belt Digital position display (axis) Total connected load (kW): 59.1 The CNC control manages the movement (X-axis) of the horizontal drilling supports The CNC control manages the movement (Y-axis) of the stops The CNC controls the movement (X-axis) of the conveyor belts

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2009, MC Biesse angle aggregate HSK 63 F with 2 outputs Manual Hedpfx Aewmtaqobmsfr Key Collet Location: ex stock 54634 Bitburg - immediately available -

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 008203, Maksimali apdorojimo plotis: 1000 mm Maksimalus apdorojimo ilgis: 2950 mm Maksimalus apdorojimo aukštis: 1300 mm Maksimalus padavimo greitis: 40 m/min Hodpfjx A Tgaex Abmjfr

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2002, I am selling a CNC dowel drilling machine with dowel inserter: BIESSE COMIL INSIDER KT2, year of manufacture 2002. - 2 pcs. CNC drilling heads, top-mounted - 1 pc. grooving saw - 2 pcs. SARG vibration dowel inserting units - 1 pc. vacuum pump This is part of a Biesse line consisting of: COMIL Insider dowel inserting – milling – grooving – dowel inserting – glue inserting – accessory inserting – line Year of manufacture 1999-2001. It is possible to sell the machines separately. Hodpfx Ajt N Rkvobmjfr Vibration dispensers and motorized conveyors included in the offer. Please send your inquiry for more photos and details.

Sąlyga: labai geros būklės (naudotas), PC control type NC 400 No. 2 motorized through-feed conveyor belts No. 2 horizontal drilling supports No. 2 drilling units for each horizontal drilling support Spindles per horizontal drilling unit (qty.) 11 Max. working width (mm): 3200 Min. working width (mm): approx. 205 No. 6 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support No. 3 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling supports No. 5 upper vertical workpiece clamps Chip conveyor belt Digital display of positional data (axis) Total connected load (kW): 59.1 Hfsdpjidqf Rsfx Abmjr The CNC control operates the movement (X-axis) of the horizontal drilling supports The CNC control operates the movement (Y-axis) of the stops The CNC controls the movement (X-axis) of the transport belts

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 007848, Type of applied edge: thin edge, thick edge, solid wood Adhesive system: EVA, hot air Jointing unit: yes Multi-function unit: yes Max. feed speed: 20 m/min Maximum panel thickness: 60 mm Working units: 8 pcs Hodpfx Aowkrqpobmefr

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1999, I am selling a CNC dowel drilling machine with dowel insertion unit BIESSE COMIL INSIDER KT2, year of manufacture 1999. - 2 pcs. CNC drilling heads from above - 1 pc. groove saw - 3 pcs. "3Master Vibratori" vibration dowel insertion units This is part of a Biesse line consisting of: COMIL Insider dowel - milling - grooving - dowel insertion - glue application - accessory insertion - line Year of manufacture: 1999–2001. It is possible to sell the machines separately. Vibration feeders and motorised conveyors are included in the deal. Hodpfx Abet N Hmmomjfr For more photos and details, please send your enquiry.

Sąlyga: labai geros būklės (naudotas), Automatic Throughfeed Drilling and Dowel Inserting Line (2 machines), consisting of: W12054A) AUTOMATIC DRILLING MACHINE "BIESSE" Techno FDT - 2 powered throughfeed conveyors, feed rate up to 75 m/min - 2 horizontal drilling units (each with 2 drilling heads, each 1.8 HP and 22 drilling spindles) - 5 lower drilling units (each with 2 split and reversible drilling heads, each 2.3 HP and various drilling heads) - 1 upper drilling unit (with 2 split and reversible drilling heads, each 2.3 HP and various drilling heads) - 5 upper vertical workpiece clamps - 2 endless screws for chip extraction CNC control (software module Tooling System) for both machines. W12054B) AUTOMATIC DRILLING AND DOWEL INSERTING MACHINE "BIESSE" Techno SDT - 2 powered throughfeed conveyors, feed rate up to 75 m/min - 2 horizontal drilling units (each with 8 horizontal units – glue application and dowel insertion tools) - 3 lower drilling units (each with 2 split and reversible drilling heads, each 2.3 HP and various drilling heads) Hfsdpfx Aovnq Txjbmjr - 1 upper drilling unit (with 2 split and reversible drilling heads, each 2.3 HP and various drilling heads) - 3 upper vertical workpiece clamps - 2 endless screws for chip extraction

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2002, I am selling a CNC dowel boring machine with dowel inserting unit, BIESSE COMIL INSIDER KTC, year of manufacture 2002. Hsdot N Rixepfx Abmjfr - 2 pcs. CNC boring heads from the side - 1 pc. glue injection head - 3 pcs. 3Master Vibratori vibratory dowel insertion units The machine is part of a Biesse production line consisting of: COMIL Insider dowel boring – milling – grooving – dowel inserting – glue inserting – accessory inserting – line Years of manufacture 1999-2001. It is possible to sell the machines separately. Vibratory dispensers and motorized conveyors are included in the deal. For more photos and details, please send an inquiry.

Sąlyga: labai geros būklės (naudotas), PC control unit type NC 400 (with software for managing work cycles) No. 2 through-feed motorised conveyor belts Max. working width (mm): 3200 - Min. working width (mm): approx. 205 No. 2 horizontal drilling supports No. 2 drilling units on each horizontal drilling support Spindles per horizontal drilling unit (No.): 11 No. 4 lower vertical drilling supports No. 2 drilling units on each lower vertical drilling support No. 2 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling supports Hedpji D D Tfjfx Abmefr No. 2 upper vertical workpiece clamps No. 2 endless screws for chip removal Digital position display (axis) Total connected load (kW): 25 The CNC controls the (X-axis) movement of the horizontal drilling supports. The CNC controls the (Y-axis) movement of the stops. OPTION: Front loading system (for narrow parts: Min 60mm - Max 260mm)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2001, I am selling a CNC accessory insertion machine with gluing injection, BIESSE COMIL INSIDER IT2G, year of manufacture 2001. Included: - 2 pcs. CNC drawer slide insertion from above - 6 pcs. glue injection heads - 1 pc. vibrating accessory insertion unit Part of a Biesse production line comprising: COMIL Insider dowel - milling - grooving - dowel insertion - glue injection - accessory insertion - line Year of manufacture: 1999-2001 Hfodpfxst N N Aqs Abmsr Machines can be sold separately. Vibration feeder and motorized conveyor are included in the offer. For more photos and details, please send an inquiry.

Sąlyga: labai geros būklės (naudotas), Electronic machine, CNC-controlled, PC control unit type NC 500 – Tooling System software No. 2 powered conveyor belts – feed speed (m/min) approx. 35–75 No. 2 horizontal drilling supports Drilling units per horizontal support (qty) 2 x 1.8 HP Max. working width (mm) 3200 – Min. working width (mm) 215 No. 7 lower vertical drilling supports Drilling units per lower vertical support (qty) 2 x 1.8 HP No. 3 upper vertical drilling supports Spindles per upper drilling support (qty) 2 x 1.8 HP No. 5 upper vertical workpiece clamps No. 2 screw conveyors (endless) for chip extraction CNC controls movement (X-axis) of horizontal drilling supports CNC controls movement (Hv) of the 2 horizontal drilling supports CNC controls movement (X-axis) of vertical drilling supports Hsdpfxshvi Duo Abmsfr CNC controls movement (axes Y1 and Y2) of the drilling units CNC controls movement (Y-axis) of the stops CNC controls movement (X-axis) of the workpiece clamps CNC controls movement (X-axis) of the conveyor belts The CNC controller manages all programming of automatic work cycles.

Sąlyga: labai geros būklės (naudotas), Double-sided – First machine in a processing line Double-sided (1 LEFT single-sided machine + 1 RIGHT single-sided machine) Edge thickness with rolls (min/max) mm 0.3 – 3 Panel thickness (min/max) mm 10 / 60 Working width (min/max) mm 100 / 1200 Control system: PC Base Windows / Software PC / SINTRA Feed speed (adjustable) m/min 10 – 40 (C.N. INVERTER) FORMAT PROCESSING (per side): Spray unit (for liquid release agent) No. 2 hoggers DT 10 (5.8 kW x 2) Empty space EDGEBANDING SECTION (per side): Hfjdpou Rc Hysfx Abmsr 1st gluing unit (Hot Melt + premelter) SP 30 (High Melt + Edge Control EC 40) 2nd gluing unit (premelter with hot air) Air Force System Edge pressure zone (CNC controlled) + edge magazine for rolls (No. 6 positions) Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC controlled) RF 40 (2 x 1 kW) 0°-25° No. 1 universal milling unit for grooving/rebating/profiling EB 60 (1 x 5 kW) - ISO 30 motor Multi-profile scraper unit (CNC controlled) RB 40 Flat scraper unit RC 20 Spray unit (for polishing fluid) Buffing unit SZ 30 (2 x 0.37 kW)

Sąlyga: labai geros būklės (naudotas), Double-sided FORMAT and EDGE BANDING MACHINE (1st and/or 2nd machine in a line) Edgeband Material (edges) Thickness (min/max) mm: 0.3 – 3 Panel Thickness (min/max) mm: 10 – 60 Working Width (min/max) mm: 240 – 2700 Control: PC Base Windows / SINITRA Software Feed Speed (variable) m/min: 10 – 40 (INVERTER CNC) Cam Pitch (mm): 500 FORMATTING UNIT (for each side): Hfjdpfx Aou Rc Anobmor - Safety milling cutter (pre-milling) AS 10 (5.8 kW) pneumatic - 2 x Chipper cutters DT 10 (5.8 + 5.8 kW) - Spraying device (for liquid non-stick agent) EDGE BANDING UNIT (for each side): - 1st Gluing unit (hot melt glue + pre-melter) SP30 (High Melt + Edge Control EC 40) - 2nd Gluing unit (pre-melter with hot air) Air Force System - Edge pressure zone (CNC-controlled). Edge magazine for rolls (6 positions) - End trimming unit IT 90-X (0.65 kW x 2) 28 m/min, 0 – 25° - Pre-milling unit RS 10 (2 x 2 kW) - Multi-profile milling unit (CNC-controlled) RF 40 (1 x 2 kW) 0 – 25° - Multifunctional unit (radius milling and contour milling) AR 80 (0.65 kW x 2) 25 m/min ROTAX. Revolver 8+8 stations (max. 25 m/min) - Motors with automatic tool change (tools) - Multi-profile scraping unit (CNC-controlled) RB 40 (multi-profile) - Flat scraper unit RC 20 + spraying units (for polishing fluid) - Buffing unit SZ 30 (0.37 kW x 2)

Sąlyga: labai geros būklės (naudotas), Flexible N.C. Automatiklinie zum Bohren, Fräsen und Einpressen von Beschlägen. Numerische Steuerung mit Albatros-Software. Bestehend aus: KZ2046) Einlauf mit Igel (Puffer-)Speicher (18 Positionen) Hodpfx Abjidmkromjfr KZ2047) Übergabe mit motorisiertem Förderband KZ2048) CNC Modell Vector GLR-X 30-13 KZ2049) Übergabe mit motorisiertem Förderband KZ2050) CNC Modell Vektor XK 40-13 KZ2051) Übergabe mit motorisiertem Förderband KZ2052) CNC Modell Idrak 3 KZ2053) Übergabe mit motorisiertem Teppichband mit 90° Umlenkung auf einem Rollentisch KZ2054) Rollenförderer mit ebenfalls motorisierten Bändern (zum Bewegen der Platten um 180° zu den Montagelinien)