Biesse Rover 35 L pirkti naudotą (318)

Būklė: naudotas, Gamybos metai: 2013, Machining centre with automatic robot for loading and unloading panels Numerical control: Biesse XP600 with graphical interface software Biesse Works ADVANCE – machine and office version WRT Technology (Windows Real Time): The machine control logic is processed directly on the PC, not on a dedicated special device. Working range in X-axis: 6200 mm Working range in Y-axis: 1552 mm Working range in Z-axis: 180 mm Z-axis travel: 235 mm No. of working fields in X-axis: 2 Bar worktable / console No. 10 EPS electronically adjustable bars for vacuum pad holders 8 pneumatic Bakelite bars for panel lifting – loading and unloading assistance No. 4 electronically adjustable EPS vacuum cups per bar with vacuum seal for panel clamping during machining No. 1 vertical electrospindle with automatic tool change, 12 kW motor – 12,000 rpm, flange for aggregates, prepared for C-axis vector Automatic tool changer with 12 positions, mounted on the machine head BH35L boring head with the following spindle configuration: - No. 14 vertical spindles in X-axis - No. 10 vertical spindles in Y-axis - No. 6 horizontal spindles in X-axis - No. 4 horizontal spindles in Y-axis Independent saw blade for grooving in X-axis – diameter: 120 mm Front safety mat and safety system Perimeter safety fence Automatic lubrication system Machine-controlled cooling and cleaning system with conditioner Vacuum pump: 250 m³/h Kuka industrial robot with 6 articulated axes with point-to-point positioning Independent control panel Panel alignment table Barcode reader on robot arm Panel handling system including: * 1 motorized roller conveyor for preloading panel stacks * 1 translational motorized roller conveyor Kdodokvrxuopfx Aldsn * 1 motorized roller conveyor for unloading panel stacks Technical data: * Type: KR210-2 * Number of axes: 6 * Permissible nominal load: 210 kg * Machine weight: 1267 kg * Noise level: 75 dB * Installed power: 25.8 kW * Panel dimensions – min./max. length: 300/3000 mm * Panel dimensions – min./max. width: 180/1500 mm * Panel dimensions – min./max. thickness: 8/60 mm * Max. panel weight: 90 kg

Būklė: naudotas, Gamybos metai: 2009, Biesse Factory Control Working area on the X-axis: 3500 mm Working area on the Y-axis: 1585 mm Kodpfx Alow D Dhasdsdn Stroke on the Z-axis: 350 mm Number of working fields: 2 Bar working table Number of adjustable rails: 8 Number of pneumatic Bakelite bars for lifting the panel: 4 3 adjustable suction cups per rail with vacuum seal to hold the panel in place during machining Number of vertical electrospindles (4-axis, Vector) with automatic tool change, HSK type taper: 1 10-position rotary tool change system on the processing head 24-position chain tool change system – located at the rear of the machine Drilling unit with vertical and horizontal spindles, configured as follows: - 12 vertical spindles in X - 12 vertical spindles in Y arrangement - 6 horizontal spindles in X - 4 horizontal spindles in Y arrangement - 1 independent saw blade for milling X-grooves Front carpet protection and safety system Perimeter safety fencing Chip extraction system with motorized conveyor belt Conditioning system for cooling and cleaning the machine control Vacuum pump, 250 m³/h TECHNICAL DETAILS TO BE VERIFIED

Būklė: naudotas, Gamybos metai: 2018, Numerical control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Sophia – IoT connectivity Office monitoring Working area in X-axis: 3228 mm Kdedpfx Asugpwneldjn Working area in Y-axis: 1580 mm Working area in Z-axis: 200 mm with suction cups H74 mm Working area in Z-axis: 245 mm with suction cups H29 mm No. 8 adjustable ATS panel support rails Pneumatic clamping system installed, divided into two Y-zones No. 6 pneumatic bakelite bars for panel lifting No. 3 adjustable suction cups for support bar Set-up assistant for suction cups No. 1 electrospindle (pantograph) with 4 axes, automatic tool changer, 13 kW motor (17.4 HP), liquid cooling, HSK cone connection, 20,000 rpm Automatic tool changer with 16 positions on the X-axis of the carriage Independent Tesa boring heads BH17 arranged as follows: No. 5 independent spindles for vertical drilling in the “X” direction No. 5 independent spindles for vertical drilling in the “Y” direction No. 4 spindles for horizontal drilling in the “X” direction No. 2 spindles for horizontal drilling in the “Y” direction No. 1 saw blade integrated in the drilling head, diameter 120 mm (usable cut 25 mm) GU60L gluing unit for EVA glue with premelter – edge pressure system with double rubberized roller for spokes Maximum internal diameter 30 mm and sensor for edge jointing - 500 ml glue pot mounted on glue roller - edge warming lamp Edge pre-feed system - edge cutting system - option for manual edge feeding Plastic edge thickness from 0.4 to 3 mm Wood edge thickness from 0.4 to 2 mm Laminate edge thickness from 0.4 to 1.2 mm Maximum edge width 65 mm Workpiece thickness from 10 to 60 mm Minimum machinable internal radius with edge processing: 30 mm Maximum external radius for edging, proportional to edge thickness and stiffness: * 10 mm with edge up to 1 mm thick * 20 mm with 2 mm thick edge * 30 mm with 3 mm thick edge Minimum dimensions of edgebanded panel: 300 x 300 mm Minimum internal diameter for edging: 350 mm with plastic edges less than 1 mm thick and panel max. thickness 18 mm Edge magazine with 2 positions inside the safety enclosure for edges up to 65 mm thick Finished panel cleaning station with automated distribution of special cleaning liquids and a cleaning cycle No. 1 unit for edge rounding/chamfering No. 1 EF60A combination unit trimmer/scraper Perimeter safety fence Chip extraction system with motorized conveyor Liquid cooling system Automatic lubrication system No. 1 vacuum pump with 250 m³/h TECHNICAL DATA TO BE CONFIRMED

Būklė: naudotas, Gamybos metai: 2019, Numerical control with bSolid software The multi-document software application in a Windows environment enables the design of the finished product, the definition of its processes, work planning, simulation of machining operations on the machine’s 3D model, and generation of the required machine programs. bSolid - 3-axis machining bSolid - 5-axis machining module for surface processing using 5-axis units and interpolated movements on all 5 available axes (X, Y, Z, C, B). The module includes the following commands: • Surface assignment for three-dimensional roughing and finishing operations • Spreading or projecting a path onto a curved surface • Machining on a single plane • Following 2D or 3D curves with any type of tool bSolid - 3D engraving bSolid - Importing external formats Working areas: X = 5055 mm; Y = 1650 mm (may vary depending on configuration) Z = 200 mm with modules H=74 mm Z = 245 mm with modules H=29 mm Loadable part in Y: * 1650 mm, with a thickness of up to 60 mm on modules with a height of 74 mm * 1600 mm, with a thickness over 60 mm on modules with a height of 74 mm. 10 ATS levels – 40 carts. Scope of supply includes: • 2 aluminium rails (No. 1 left and No. 1 right) on which the lateral stops slide. • 10 aluminium support tables. The tables glide on hardened and ground linear guides with ball bearing guides. Locking is provided on both linear guides, front and rear, by four pneumatic cylinders. Control is via a button in front of the working area. The carriages glide on steel guides located above the extrusion. Pneumatic locking system, divided into 2 locking zones in X Automatic positioning (EPS) for support tables. "EPS" (Electronic Positioning System): Device for automatic positioning of the working surfaces and carts via NC, complete with locking devices to eliminate possible operating errors. Rear row stops, with 140 mm stroke Intermediate row stops, positioned at 405 mm, with 140 mm stroke. Front row stops, positioned at 1460 mm, with 140 mm stroke 4 lateral stops with 140 mm stroke (2 right + 2 left), with system 2 additional lateral stops with 140 mm stroke (1 right + 1 left). Sensor to check whether the stops are lowered 12 clamping devices for holding narrow workpieces 6 loading aid bar lifts for H=74 mm modules 5A configuration, for Rover B. Configuration for high productivity and flexibility thanks to the two operating units (4 and 5 axes) and the option of simultaneous tool changes. Includes the axes and carriages for the movement of the main operating units. Comes with 2 inverters. Kedew D E A Eopfx Aldedn Second Y-axis. Enables separation of the front and rear Y carriages with independent drives. The two Y carriages achieve a maximum speed of 118 m/min. 13.2 kW (17.7 HP) electric spindle, HSK F63 interface, air-cooled. Main features: • 11 kW (14.7 HP) from 12,000 to 15,000 rpm in S1 operation. • 13.2 kW (17.7 HP) from 12,000 to 15,000 rpm in S6 operation. • Ceramic bearings. • Right and left-hand rotation. • Speed programmable from 1,000–24,000 rpm via NC. • Pneumatic release operated over a prismatic linear guide with ball bearings. A cover is included for chip extraction, with 6 selectable positions.

Būklė: naujas, mašinos/transporto priemonės numeris: 1000007776, KONTROL SİSTEMİ • PC tabanlı sayısal kontrol • bSolid yazılımı • CAD-CAM 3D modülü – 3 eksenli çalışma modülü – bEdge modülü TEKNİK ÖZELLİKLER • Kullanışlı çalışma alanı (x-y-z): yaklaşık 4.320 x 1.600 x 200 mm • Kenar bantlama için kullanışlı çalışma alanı (x – y): yaklaşık 3.300 x 1.500 x 60 mm PANEL DESTEK ALANI • Adet 2 bağımsız “X” ekseninde çalışma alanı • Adet 10 manuel pozisyonlu ve pozisyon/yön ışık göstergeli panel destekli SA (Set-Up Assistant) çalışma tablası – adet 32 ray • Adet 8 yükleme yardımcı kaldırma kolu • Adet 28 dayama (adet 8 arka dayama, adet 8 orta dayama 670 mm’de, adet 6 yan dayama, adet 6 merkezi dayama) iniş kontrol sensörlü komple • Adet 1 vakum pompası 100 m³/h DELME/TESTERE ÜNİTESİ • Adet 1 ekstra “Z” podu arka işlem ünitesi için • Adet 1 Boring head (delik açma kafası) BH 24 L KANAL AÇMA/FREZELEME ÜNİTESİ • Adet 1 elektrospindel 13,2 kW (17,7 HP) HSK F63 pensli, hava soğutmalı, 360° dişlili işlem ünitesi cihazı ile komple (C Eksen Tork) • Adet 1 üfleme sistemi 4 memeli • Adet 1 16 konumlu revolver tip takım değiştirme ünitesi, “X” podu üzerinde KENAR BANTLAMA ÜNİTESİ • EVA ve PUR tutkal için GU60L kenar bantlama ünitesi, aşağıdakileri içerir: – EVA tutkal kazanı + PUR tutkal kazanı – EVA tutkal için ön eritici – 30 mm'ye kadar iç yarıçaplı kenar bantlama için çift baskı silindiri; kapalı halka ek yeri sensörü • Adet 1 kenar bandı magazini, "X" podu üzerinde 2 rulo için • Adet 1 kenar bandı magazini, makine dışında 2 rulo için • Adet 1 kenar bantlama öncesi panel temizleme için üfleme ünitesi • Adet 1 kenar düzeltici/temizleme istasyonu • Adet 1 HSK F63 takımı, maksimum 215 mm bıçak çapı için • Adet 1 kombine kaba düzeltme/kenar kazıma/tutkal kazıma takımı EF60A Ksdpfxsw Nip Ss Aldedn • Adet 1 kenar yuvarlatma ve uç düzeltme takımı • Adet 1 dar panel seti 10-60 mm (kenar maks. 2 mm) ve 12-60 mm (kenar maks. 3 mm) için ÖN DONANIMLAR VE AKSESUARLAR • Otomatik yağlama sistemi • Talaş çıkış sistemi NORM VE GÜVENLİK OPSİYONLARI • Orijinal EC Uygunluk Beyannamesi kopyası • Çift ön ve arka fotosel bariyerli tampon

Būklė: naudotas, mašinos/transporto priemonės numeris: 008013, Darbinė eiga X ašis: 5780 mm Darbinė eiga Y ašis: 1650 mm Kdjdpowuz Eksfx Aldsn Darbinis paviršius: Su vakuuminėmis konsolėmis Pagrindinio špindelio galia: 13,2 kW Valdomų ašių skaičius: 4 ašys Maksimalus briaunos aukštis: 60 mm Gręžimo špindelių skaičius: 16 Įrankių vietų skaičius: 16

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, Įranga: CE žymėjimas, dokumentacija / vadovas, Winline 1650 yra modernus ir novatoriškas apdirbimo centras, skirtas langų ir durų elementų gamybai. Jis atlieka pilnus darbo ciklus, įskaitant užkrovimą/iškrovimą ir detalių pozicionavimą kiekvienai būtinygai operacijai, tiesiogiai valdant NC. Šis naujas integruotos automatizacijos lygis užtikrina aukščiausią tikslumo lygį. Įrenginys yra tikra „vieno žmogaus gamykla“, kurią aptarnauja vienas operatorius, vykdantis visą procesą su kiekvienu elementu be papildomų perėjimų – nuo obliuotų komponentų iki detalių, paruoštų montavimui ir dažymui. Dėl to operatorius laimi laiko kitoms su langų gamyba susijusioms užduotims: frezavimui, matmenų tikrinimui, komponentų tvirtinimui spaustuvuose, furnitūros montavimui, stiklinimui ir pan. Techninė specifikacija: – Judanti portalinė konstrukcija ir dviguba Y ašis su nepriklausomais vežimėliais – Detalės manipuliatorius: užkrovimas, iškrovimas ir spaustukų keitimas – Automatinė tepimo sistema – Daugiazonė sistema – Automatinis atraminės svirties judėjimas plokštėms – Juostinis transporteriu drožlių ir atliekų šalinimui – Skaitmeninė kontrolė – Asmeninis kompiuteris su 3D grafikos korta ir LCD ekranu – Klimatizuojamas valdymo spinta – Dokumentacija Kodpfx Aljwnx Agodedn – Techninės priežiūros įranga – Nuotolinio valdymo pultas – Pramonė 4.0 – integracija su gamyklinėmis sistemomis

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2012, mašinos/transporto priemonės numeris: 18966, Funkcionalumas: visiškai funkcionalus, Nėra minimalaus kainos – garantuotas pardavimas aukščiausią kainą pasiūliusiam! TECHNINIAI DUOMENYS Darbo zona X ašis: 3.309 mm Darbo zona Y ašis: 1.703 mm Darbo zona Z ašis: 120 mm Stalo ilgis: 3.100 mm Stalo plotis: 1.500 mm Frezavimo velenų skaičius: 1 Valdomų ašių skaičius: 3 Įrankių tvirtinimo sistema: HSK-F63 Įrankių keitiklio vietų skaičius: 12 STAKLIŲ DUOMENYS Sistema / programinė įranga: BiesseWorks Galia: 360 m³/h Jungties skersmuo: 70 mm Vakuumas: 300 bar Pagrindinio variklio galia: 11 kW Elektros sunaudojimas: 24 A Galia: 14,2 kW Matmenys ir svoris Matmenys (I x P x A): 4.500 x 2.350 x 2.000 mm Svoris be apkrovos: 1.530 kg Transporto paketų kiekis: 2 Vakuuminis siurblys Busch MM 1322 A VM8 Gamybos metai: 2012 Pagrindinio variklio galia: 6 kW ĮRANGA CE žymėjimas Kedpfx Aszdy S Ssldjdn CE sertifikatas Dokumentacija (elektros schemos, atsarginių dalių sąrašas, techniniai duomenys, vartotojo vadovas (NL, popierinis variantas)) Apsauginė tvora, apsauginė šviesos užuolaida Frezavimo stalas: plokščias stalas Medžiagos prispaudimo sistema: pneumatinė

Būklė: naudotas, Gamybos metai: 2009, Used machine Year of manufacture: 2009 Single-sided automatic edge banding machine with CNC control, 10" touch-screen Industrial conveyor chain 1 1/4" Joint trimming unit FI-502 Glue application unit VC-710 End trimming unit IN-801 Top and bottom flush trimming unit RS-100 2 motorized multifunctional profile trimming units CR-202 (FAST system, 4 standard positions) Scraper unit RBK-503, NC 2 positions Flat scraper RCC-701 Workpiece thickness: 10-65 mm Max. workpiece height with profile trimming unit (depending on profile): 35-65 mm Edge thickness, coil: 0.4-3 mm Edge thickness, strip material: 0.4-22 mm (depending on unit) Min. workpiece length: 140 mm Min. workpiece width (at length 140 mm): 85 mm Kodpfjv R Nk Ujx Aldedn Min. workpiece width (at length 250 mm): 50 mm Feed speeds: 10-14-18-20 m/min Central extraction connection: 200 mm Extraction connection (edge banding): 80 mm Extraction connection (joint trimming): 120 mm Glue tank capacity: approx. 3 kg Heat-up time at 1/2 fill: approx. 10 min Length: 6000 mm Width: 1780 mm Height: 1770 mm Machine offered without the workpiece return device shown in the photos Availability: short-term Location: Flörsheim

Būklė: geras (naudotas), Gamybos metai: 2007, Parduodu plokščių pjovimo stakles BIESSE SELCO EB75. Pagaminimo metai: 2007. Pjovimo plotas: 3200x3200 mm. Pjovimo aukštis: 75 mm. Pagrindinis variklis: 7,5 kW. Priešpjovimo variklis: 2,2 kW. Bendras dydis: plotis 5422 mm x ilgis 7688 mm. Griebtuvai su pneumatiniu reguliavimu. Viršutiniai šoniniai pozicionavimo volai. Pneumatinis stūmimas. Įskaičiuota optimizavimo programinė įranga. Labai gera būklė. Galima naudoti iš karto. Kedpfx Aovw Nkholdodn

Būklė: naudotas, Gamybos metai: 2006, mašinos/transporto priemonės numeris: BM0000029, valdiklio modelis: WINDOWS XP, ašies skaičius: 42, plokštės aukštis: 60 mm, plokštės ilgis: 2 800 mm, plokštės plotis: 1 300 mm, No reserve price – guaranteed sale to the highest bidder! Kedpfx Aloy Uvnaododn Vertical CNC machining centre for drilling, milling, and dowelling, equipped with an additional robotic arm for automated material handling! Machine pick-up must take place between 10.06.26 and 30.06.26! The machining centre consists of the following two units: 1. BIESSE BREMA VEKTOR 15-18 R X-axis working range: 2,800 mm Y-axis working range: 1,300 mm Number of controlled axes: 3 axes Total number of drilling spindles: 42 Total number of tool changer positions: 10 Maximum panel passage height: 60 mm Automatic panel loading system Automatic panel stacking system Drilling units Drilling unit 1: Horizontal drilling spindles on X axis Number of horizontal drilling spindles in X: 9 Drilling unit 2: Horizontal drilling spindles on Y axis Number of horizontal drilling spindles in Y: 9 Drilling unit 3: Vertical drilling spindles Number of vertical drilling spindles: 24 Milling spindle Number of milling spindles: 1 Number of controlled axes (milling spindle): 3 Automatic tool changer: Yes Number of tool magazine stations: 10 Control and safety Control system: WINDOWS XP Machine programming software: BKEEPER Safety standard: EC certification Safety system: Light curtain 2. KUKA KR 180 L100-2 K 2000 Max. panel width: 1,300 mm Max. panel length: 2,800 mm Max. payload: 100 kg Number of controlled axes: 6 Arm reach: 3,700 mm Number of panel stacking stations: 3 Control system: KR C 2 EQUIPMENT Automatic panel loading system Automatic panel stacking system HONEYWELL barcode scanner Protective netting on the machine The machine is sold and delivered in its actual and legal condition (“as seen and approved”) based on photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and is responsible for installation, securing, and operation of the machine at the destination. External reference: 8530

Būklė: naudotas, Gamybos metai: 2014, bendras aukštis: 2 400 mm, bendras ilgis: 4 500 mm, bendras plotis: 2 200 mm, Color: Grey Unladen Weight: 2,500 kg CNC Machining Center Biesse Skill 12 24 G FT Year of manufacture: 2014 Machine No.: 60961 HSK F63 tool holder 10x vertical drilling 12 tool changer positions Software: BiesseWorks X-axis: 2,465 mm Y-axis: 1,260 mm Z-axis: 324 mm Disassembled for transport on a standard trailer; 4,500 x 2,200 x 2,400 mm; Net weight: 2,000 kg - Special features: - Note: The pallet with the white control cabinet is not part of this machine - Year: 2014 - Documentation available: Yes - CE certificate available: No - Serial number: 60961 - Number of milling spindles: 1 - Type of milling table: Flat table - Tool clamping system: HSK-F63 Kedpfxswnhans Aldsdn - Drilling tools included: Yes - Number of vertical drilling spindles: 10 - Tool changer positions: 12 - System/software: BiesseWorks - Safety feature: Safety fence - Vacuum pump included: Yes - Quantity: 1 - Brand: Becker - Working area X [mm]: 2,465 - Working area Y [mm]: 1,260 - Working area Z [mm]: 324 - Transport dimensions: 4,500 mm x 2,200 mm x 2,400 mm (L x W x H) - Transport weight: 2,500 kg - Number of transport packages: 1 Financial information VAT: The stated price is net of VAT VAT/margin taxation: VAT is deductible for businesses Delivery and trade-in possible at any time for all items from the industrial sector Glenn Smeets

Būklė: naudotas, Gamybos metai: 2014, Color: Grey Unladen weight: 4,000 kg Price: On request - Machine available from: 2026-01-26 - Year of manufacture: 2014 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: 89867 - Number of milling spindles [pcs]: 1 - Type of milling table: Flat table - Tool clamping system: HSK-F63 - Boring tool included: Yes - Saw unit included: Yes - Tool changer positions [pcs]: 12 - System/Software: BiesseWorks - Safety feature: Safety mat - CNC options: Labelling machine, loading system, unloading system - Table length [mm]: 3600 - Table width [mm]: 1800 - Working area X [mm]: 3765 - Working area Y [mm]: 1875 - Working area Z-axis [mm]: 324 - Transport weight [kg]: 4000 kg - Number of transport packages [pcs]: 1 Financial Information VAT: The listed price is exclusive of VAT VAT/margin scheme: VAT is deductible for commercial customers Kdedpexr Evljfx Aldjn Delivery and trade-in possible at any time for all items from the industrial sector Glenn Smeets

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 380 V, įėjimo dažnis: 50 Hz, TECHNINĖS CHARAKTERISTIKOS: Darbo zona (x, y, z): 2900 x 1130 x 110 mm 6 darbo strypų su siurbtukais, kiekviename po 3 siurbtukus BECKER vakuuminis siurblys 90 m³ Atskiras elektrinis skydas + valdymo pultas Programinė įranga: BIESSEWORKS Saugos kilimėliai Kedpfx Ajzfi H Uoldodn GRĘŽIMO BLOKAS BH 17L Vertikalių grąžtų skaičius: 10 Horizontalių grąžtų skaičius: 2 + 2 X ašyje, 1 + 1 Y ašyje 1 pjūklo grupė grioveliams X ašyje FREZAVIMO BLOKAS: 7 kW elektroveržlė – ISO30 10 pozicijų įrankių keitiklis

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, Double table machining center Working area X: 2,590 mm Working area Y: 2,260 mm Working area Z: 400 mm Kdjdpfx Asuqw E Noldon Number of milling spindles: 2 Spindle with liquid cooling Main motor: 19.2 kW Max spindle speed: 24,000 rpm Aggregate heads 4th axis: C-Axis Tool clamping system: HSK-F63 Central tool changer magazine: 24 positions Tool changer on each head: 12 positions Vertical drilling heads: 20 (per head) Horizontal drilling bits X: 8 Horizontal drilling bits Y: 8 Grooving saw in X and Y directions 2 tables Number of vacuum pumps: 4, each 360 m³/h T-Jet chip blowing system Nesting Manual labeling Barcode reader Tool length measurement Software: BIESSE BIESSEWORKS ADVANCED, BIESSE B_NEST Weight: 17,900 kg

Būklė: naudotas, mašinos/transporto priemonės numeris: 008595, Darbo sritis X ašyje: 4687 mm Darbo sritis Y ašyje: 260 mm Darbo paviršius: Su vakuuminiais konsoliniais laikikliais Pagrindinis veleno galingumas: 19 kW Kdodpfx Alsy Stvvodjn Valdomų ašių skaičius: 4 ašys Įrankių vietų skaičius: 44

Būklė: naudotas, Gamybos metai: 2022, bendras ilgis: 8 000 mm, bendras plotis: 2 400 mm, bendras aukštis: 2 400 mm, Spalva: Pilka Svoris: 3 969 kg Kaina: Pagal užklausimą - Pagaminimo metai: 2022 - Dokumentacija prieinama: Taip - CE ženklinimas: Taip Kjdey E Hdgspfx Aldodn - CE sertifikatas: Ne - Serijos numeris: 1000056636 - Maks. pjovimo ilgis [mm]: 3200 - Maks. pjovimo plotis [mm]: 3200 - Transportavimo matmenys: 8000mm x 2400mm x 2400mm (i x p x a) - Transportavimo svoris [kg]: 3969kg - Transportavimo paketų sk.: 4 Finansinė informacija PVM: Nurodyta kaina be PVM PVM / skirtumo apmokestinimas: PVM atskaitomas įmonėms Pristatymas ir supirkimas galimas bet kuriam pramonės įrenginiui Glenn Smeets

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, KuKa robotas su Biesse RBO krovimo įranga. Pagaminta Biesse - RBO. Kedpfxoxy Afte Aldsdn - Referencinio taško nustatymo stalas - 4 metrų ilgio sija su vežimėliu judėjimui X kryptimi, lygiagrečiai staklių X ašiai - Schmaltz vakuuminė sistema - Atskira elektros spinta robotui ir kita elektros spinta RBO krovimo įrangai. Ši robotinė celė iki 2025-11-10 buvo prijungta prie Biesse Rover staklių, skirta plokščių krovimui nuo ir prie staklių. Visos roboto funkcijos 100% veikia. Parduodama dėl gamyklos uždarymo. Žiūrėkite ir pridedamą vaizdo įrašą. Rekman Maskin & Service – CNC staklių aptarnavimas nuo 1986 m.

Gamybos metai: 2001, būklė: labai geros būklės (naudotas), I am selling a Biesse line consisting of: COMIL Insider dowel - milling - grooving - dowel insertion - glue application - accessories insertion - line. Year of manufacture: 1999-2001. Kjdjd Iv H Repfx Aldodn It is possible to sell the machines separately. Vibration feeder and motorized conveyors included in the offer. For more photos and details, please send an inquiry.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2002, I am selling a CNC dowel drilling machine with dowel inserter: BIESSE COMIL INSIDER KT2, year of manufacture 2002. Kedet N Rkvspfx Aldedn - 2 pcs. CNC drilling heads, top-mounted - 1 pc. grooving saw - 2 pcs. SARG vibration dowel inserting units - 1 pc. vacuum pump This is part of a Biesse line consisting of: COMIL Insider dowel inserting – milling – grooving – dowel inserting – glue inserting – accessory inserting – line Year of manufacture 1999-2001. It is possible to sell the machines separately. Vibration dispensers and motorized conveyors included in the offer. Please send your inquiry for more photos and details.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1999, I am selling a CNC dowel drilling machine with dowel insertion unit BIESSE COMIL INSIDER KT2, year of manufacture 1999. - 2 pcs. CNC drilling heads from above - 1 pc. groove saw Kdjdpfx Aljt N Hmmodjn - 3 pcs. "3Master Vibratori" vibration dowel insertion units This is part of a Biesse line consisting of: COMIL Insider dowel - milling - grooving - dowel insertion - glue application - accessory insertion - line Year of manufacture: 1999–2001. It is possible to sell the machines separately. Vibration feeders and motorised conveyors are included in the deal. For more photos and details, please send your enquiry.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2002, I am selling a CNC dowel boring machine with dowel inserting unit, BIESSE COMIL INSIDER KTC, year of manufacture 2002. - 2 pcs. CNC boring heads from the side - 1 pc. glue injection head - 3 pcs. 3Master Vibratori vibratory dowel insertion units The machine is part of a Biesse production line consisting of: COMIL Insider dowel boring – milling – grooving – dowel inserting – glue inserting – accessory inserting – line Kjdpot N Rixjfx Aldodn Years of manufacture 1999-2001. It is possible to sell the machines separately. Vibratory dispensers and motorized conveyors are included in the deal. For more photos and details, please send an inquiry.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2008, I am selling a throughfeed CNC nesting machining center Biesse Excel NBC 712 X1-S, year of manufacture 2008. Kdedpfofwvppex Aldjn Highly productive and fast. Automatic infeed table. Working area: 3730 x 2200 mm. Configuration: - Milling head HSK63, 12 kW, 1000–24000 rpm, independent Z-axis, liquid cooling - 8-position HSK63 tool magazine - 16+8+4 drilling heads - 1 grooving saw D.150 mm, 2 positions X/Y - 1 revolving electrospindle with cutting unit - Software: BiesseWorks Advanced + Biesse Nest CD included - Pumps: 3 pcs. BUSCH 3x 300/360 m3/h Condition: like new! Fully functional. Automatic central lubrication system and extraction hoods. Complete with safety barriers, handling elements, and CE points. CE certificate and full documentation included.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2001, I am selling a CNC accessory insertion machine with gluing injection, BIESSE COMIL INSIDER IT2G, year of manufacture 2001. Included: - 2 pcs. CNC drawer slide insertion from above - 6 pcs. glue injection heads - 1 pc. vibrating accessory insertion unit Part of a Biesse production line comprising: COMIL Insider dowel - milling - grooving - dowel insertion - glue injection - accessory insertion - line Year of manufacture: 1999-2001 Machines can be sold separately. Kdsdpfx Alst N N Aqjden Vibration feeder and motorized conveyor are included in the offer. For more photos and details, please send an inquiry.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2014, mašinos/transporto priemonės numeris: 89867, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 3 765 mm, Y ašies eiga: 1 875 mm, Z ašies eigos atstumas: 324 mm, įrankių magazino lizdų skaičius: 12, bendras svoris: 4 000 kg, TECHNINĖ INFORMACIJA X ašies darbo sritis: 3 765 mm Y ašies darbo sritis: 1 875 mm Z ašies darbo sritis: 324 mm Stalo ilgis: 3 600 mm Stalo plotis: 1 800 mm Įrankio tvirtinimo sistema: HSK-F63 Įrankių keitiklio vietos: 12 vnt. STAKLIŲ DUOMENYS Frezavimo spindelių skaičius: 1 vnt. Svoris: 4 000 kg Transportavimo paketai: 1 vnt. Ksdpfx Alsy Nxybedjdn ĮRANGA Plokščias stalas BiesseWorks sistema/programinė įranga Saugos kilimėlis Gręžimo įrankis yra Pjovimo įrenginys yra Etikečių klijavimo aparatas Pakrovimo sistema Iškrovimo sistema