Biesse Rover 24 pirkti naudotą (319)

Sąlyga: labai geros būklės (naudotas), COMPLETE DOUBLE-SIDED EDGE-AND-PROFILE PROCESSING LINE (including SOFTFORMING), with through-feed drilling machines, splitter, and high-speed automated conveyor technology. Configured as follows: A) Feeding station – stacking system (gantry) "RBO (BIESSE)" Model Winner C (1) B) 1st double-sided edge-banding and profiling machine "BIESSE" Model Stream SB1 11.0 Softforming Guodpfettgy Hjx Abmek C) 1st rotation station (90° LONGITUDINAL-TRANSVERSE) "RBO (BIESSE)" Model GPK-1 D) 2nd double-sided edge-banding and profiling machine "BIESSE" Model Stream SB2 9.5 E) 2nd rotation station (90° straight or TRANSVERSE-LONGITUDINAL) "RBO (BIESSE)" Model GPK-2 F) CNC through-feed drilling machine "BIESSE" Techno FDT CN (with 2 horizontal drilling supports, 6 lower vertical drilling supports, and 3 upper vertical drilling supports) G) CNC through-feed drilling machine "BIESSE" Techno FDT CN (with 2 horizontal drilling supports, 6 lower vertical drilling supports, and 3 upper vertical drilling supports) H) 3rd rotation station (90° straight or TRANSVERSE-LONGITUDINAL) "RBO (BIESSE)" Model GPK-3 I) Longitudinal panel saw (splitter) "GM (for BIESSE)" Model Split 4-84 LT L) Destacking station – stacking system (gantry) "RBO (BIESSE)" Model Winner SC (2)

Sąlyga: labai geros būklės (naudotas), Double-sided processing machine Can be positioned after a through-feed drilling line (for automatic drilling and dowel insertion cycle) Electronic control – Programmer RT 486 Through-feed motorized conveyor belts (No.) 2 Horizontal drilling units (No.) 2 Dowel insertion systems (incl. glue injection units) No. 6 LH + 6 RH Max. working width (mm): 3200 Min. working width (mm): 205 (approx.) Lower vertical drilling units (No.) 4 Drilling heads per lower vertical unit (No.): 2 x 1.8 HP Gusdpfsdi R R Rox Abmok Upper vertical workpiece clamps (No.) 2 Total connected load (kW): 11.5

Sąlyga: labai geros būklės (naudotas), DOUBLE-SIDED LOADING STATION Gusdpeflc T Sofx Abmek Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 2 horizontal upper support beams (on which the carriage glides) No. 1 motorized carriage with horizontal metal arms No. 2 horizontal metal arms with adjustable vacuum suction cups OPTIONAL: No. 2 external roller conveyors (floor-mounted) for loading stacks of panels onto the loading station No. 1 external motorized roller conveyor (for receiving panels from the loading station) Separate electrical control cabinet Electronic control system Perimeter safety fence with safety mats Total connected load: 17.7 kW Operating capacity (cycles / min): approx. 16-20 Panel thickness (min/max) mm: approx. 10-50 Min. panel dimensions mm: approx. 250 x 320 Max. panel dimensions mm: approx. 1200 x 3000

Sąlyga: labai geros būklės (naudotas), DOUBLE-SIDED DESTACKER - Bridge design Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 horizontal upper support beam (with carriage running on it) No. 1 motorized carriage with horizontal metal arms Godod Rg Dzepfx Abmeuk No. 2 horizontal metal arms with adjustable vacuum suction cups No. 2 external roller conveyors for stacking of panels from the destacker No. 1 external motorized roller conveyor from destacker, also with belt drive for 90° panel transfer. Dimensions: 7168 mm (approx.) Separate electrical control panel OMRON electronic control system Perimeter safety fence with safety mats Operating capacity (cycles/min): approx. 16 - 20 Panel thickness (min/max): approx. 10 – 50 mm Min. panel size: approx. 250 x 320 mm Max. panel size: approx. 1200 x 3200 mm Total connected load: 20.8 kW

Sąlyga: labai geros būklės (naudotas), GANTRY LOADER with DOUBLE LOADING STATION Vacuum system (with its pump) No. 4 vertical columns supporting the upper crossbeam No. 1 upper horizontal crossbeam (for the movement of the motorized trolley) No. 1 motorized trolley to which horizontal arms are attached No. 2 adjustable horizontal metal arms with vacuum suction cups No. 2 floor-mounted rollers for feeding panel stacks into the Loader Godpfod Rg Dpox Abmeuk No. 1 motorized roller table (delivering panels to the Unloader), with additional cross motorized conveyor belts (at 90°). Dimensions approx. 7,232 mm Separate electrical and control panel OMRON electronic controls Perimeter safety and protection metal fences Working capacity (cycles/minute): approx. 16 - 20 Minimum/maximum board thickness: approx. 10 – 50 mm Minimum panel size: approx. 250 x 320 mm Maximum panel size: approx. 1,200 x 3,200 mm Installed power: 23.3 kW

Sąlyga: labai geros būklės (naudotas), ONE-SIDED DESTACKING STATION - Upper traverse, horizontally shiftable by 180° - Console table with vacuum clamps Gujdjcggy Sopfx Abmok - Lift table (internal) with motorized sheet metal roller conveyor - Front safety guard, movable - Separate control cabinet and operating panel - External roller conveyor for transporting the stack of sheets from destacking - External driven roller conveyor from destacking, optionally with belt for 90° transfer of sheets - Operating capacity (cycles/min): 12-15 - Plate thickness (min/max) mm: 10 - 40 - Min. plate dimensions mm: 250 x 320 - Max. plate dimensions mm: 1200 x 3000 - Total connected load Kw: 10

Sąlyga: labai geros būklės (naudotas), CNC-controlled (automatic) drilling and dowel insertion line, consisting of: VZ0250A) FEEDING STATION "RBO" Tornado C 1300, with powered roller conveyor VZ0250) AUTOMATIC DRILLING MACHINE "BIESSE" Techno FDT, with CNC - 2 continuous powered belts, feed speed up to 75 m/min - 2 horizontal drilling units (each with 2 drill heads, 1.8 kW each, with 22 drilling spindles each) - 4 lower drilling units (each with 2 split and reversible drill heads, 1.8 kW each, with various drill heads) - 3 upper drilling units (each with 2 split and reversible drill heads, 1.8 kW each, with various drill heads) - 3 upper vertical workpiece clamps - 2 (endless) screw conveyors for chip removal CNC control NC 500 for both machines Gjdpod Nviqjfx Abmsuk VZ0250C) AUTOMATIC DRILLING AND DOWEL INSERTION MACHINE "BIESSE" Techno SDT, with CNC - 2 continuous powered belts, feed speed up to 75 m/min - 2 horizontal drilling units (each with 6 horizontal units – gluing and dowel inserting tools) - 2 lower drilling units (each with 2 split and reversible drill heads, 1.8 kW each, with various drill heads) - 2 upper vertical workpiece clamps - 2 (endless) screw conveyors for chip removal VZ0250D) BRUSHING MACHINE "PIZZIGALLI" Model GP 11 VZ0250E) DESTACKING STATION "RBO" Tornado SC/FE 1300, with powered roller conveyor

Sąlyga: naudotas, Complete factory for furniture manufacturing, consisting of: SZ0M23) Angle panel saw "GIBEN" Type 17 (5700x2700 mm) with "SIRIO" stacking system SZ0M25) Panel saw "GIBEN" Model GammaDue (3800x2200 mm) SZ0M26) Multi-blade panel saw "GABBIANI" (finished panels 4250x2120 mm) SZ0M27) Laminating line (roller press) "BARBERAN" for melamine papers (paper glue application) SZ0M29) Press line "COLOMBO REMO" (1400x9600 mm) for paper/veneer/laminated panels SZ0M30) Press line "FRIZ" (1400x6200 mm) for paper/veneer/laminated panels SZ0M41) Double-sided sizing and edge banding line "IMA" Combima with high-speed "RBO-BIESSE" automatic handling system SZ0M42) Double-sided sizing and edge banding line "IMA" Combima Softforming with a second double-sided sizing and edge banding machine "STEFANI" and handling system "TOMASSINI" SZ0M39-40) Single-sided edge banding line for narrow workpieces "HOMAG" Model KAL 310 with splitter "NARDELLO" Model Elegance SZ0M35-36) Boring machine "BIESSE" Techno Logic with infeed and stacking system "TOMASSINI" SZ0M45) CNC-controlled drilling and dowel inserting line "BIESSE" Techno FDT with high-speed automatic handling system "RBO-BIESSE" SZ0M37) CNC machining center "MORBIDELLI" Model Author 600 KL SZ0M56) Roll slitting and winding machines "CEFLA-DUSPOHL" Type RSW 2200 T SZ0M01) Cutting line (circular saw) and wood strip cutting line "OGAM+SALVADOR" SZ0M07) Cutting line (circular saw) and wood strip stacking line "SALVADOR + SACOT" SZ0M08) Cutting line (circular saw) and wood strip stacking line "SALVADOR + CMA" Gedjcr U Urjpfx Abmouk SZ0M11-17) Preparation line for honeycomb panels SZ0M18) No. 6 multi-daylight press "COLOMBO REMO" (dimensions ?? x ?? mm) SZ0M21) Sizing and calibrating line for honeycomb panels "GABBIANI + CELASCHI + ELMAG + COSTA LEVIGATRICI" Numerous other machines (VITAP drilling machine, circular saws, glue application machines, etc.), dust extraction system, roller conveyors, shelving (wall racks), forklifts, pallet trucks, and more. The machines are still installed at the user’s site and can be inspected by appointment.

Sąlyga: labai geros būklės (naudotas), CNC-controlled Throughfeed Drilling and Dowel Insertion Line (3 machines) J06031) THROUGHFEED DRILLING MACHINE "BIESSE" KERNEL, with CNC - No. 2 horizontal drilling supports (each with 2 drilling heads of 2.3 HP and 11 drilling spindles per head) - No. 6 lower drilling supports (each with 2 split and reversible drilling heads of 2.3 HP and various drilling heads per support) - No. 6 upper drilling supports (each with 2 split and reversible drilling heads of 2.3 HP and various drilling heads per support) - No. 6 upper vertical workpiece clamps + No. 2 continuous screws for chip removal J06032) THROUGHFEED DRILLING MACHINE "BIESSE" KERNEL, with CNC - No. 2 horizontal drilling supports (each with 2 drilling heads of 2.3 HP and 11 drilling spindles per head) - No. 6 lower drilling supports (each with 2 split and reversible drilling heads of 2.3 HP and various drilling heads per support) - No. 6 upper drilling supports (each with 2 split and reversible drilling heads of 2.3 HP and various drilling heads per support) - No. 6 upper vertical workpiece clamps - No. 2 continuous screws for chip removal Gusdpsg Urn Eofx Abmsk J06033) THROUGHFEED DRILLING MACHINE "BIESSE" KERNEL, with CNC - No. 4 lower drilling supports (each with 2 split and reversible drilling heads of 2.3 HP and various drilling heads per support) - No. 4 upper vertical workpiece clamps - No. 2 continuous screws for chip removal CNC Control (software Tooling System + Woodmaster) CNC controls the movement (X-axis and Hv) of the 2 horizontal drilling supports CNC controls the movement (X-axis) of the vertical drilling supports CNC controls the movement (axes Y1 and Y2) of the drilling units + (Y-axis) of the stops CNC controls the movement (X-axis) of the workpiece clamps CNC controls the movement (X-axis) of the conveyor belts

Sąlyga: labai geros būklės (naudotas), ONE-SIDED LOADING STATION Upper traverse can be shifted 180° (horizontally) Console table with vacuum clamps Internal lift table with motorized sheet metal roller conveyor Front safety guard for feeding the stack of panels Separate control cabinet and operator panel External roller conveyor (floor-mounted) for loading the stack of panels into the loading station External motorized roller conveyor (receives the panels) from the loading station, also with belts for 90° panel transfer. Operating capacity (cycles/min): 12-15 Panel thickness (min/max) mm: 10 - 40 Minimum panel dimensions mm: 250 x 320 Maximum panel dimensions mm: 1200 x 3000 Total connected load kW: 11 Gedpfx Abjd Tywgomsuk

Sąlyga: labai geros būklės (naudotas), PC control type NC 400 (software) Through-feed motorized conveyor belts (qty.) 2 Guedpfxogk T Tte Abmsk Horizontal drilling supports (qty.) 2 Drilling units per horizontal drilling support (qty.) 2 Spindles per horizontal drilling unit (qty.) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (approx.) Lower vertical drilling supports (qty.) 6 Drilling units per lower vertical drilling support (qty.) 2 Upper vertical drilling supports (qty.) 4 Spindles per drilling unit of the upper drilling supports (qty.) 2 Upper vertical workpiece clamps (qty.) 5 Continuous screws for chip removal (qty.) 2 Digital display of position data (axes) Total connected load (kW) 48 The CNC control system manages the movement (X-axis) of the horizontal drilling supports. The CNC control system manages the movement (Y-axis) of the stops.

Sąlyga: labai geros būklės (naudotas), CNC-controlled Flexible Automatic Throughfeed Boring and Dowel Insertion Line Min/Max Workpiece (Panel) Width (X-axis) with FTT: 240 / 3100 mm Min/Max Workpiece (Panel) Thickness (Z-axis) with FTT: 12 / 60 mm Min/Max Workpiece (Panel) Length-Depth (Y-axis) with FTT: 140 / 1550 mm (or 800+800) A) Loading Station (Double Gantry Loader) "RBO" Model Advantage C B) Skewed Roller Conveyor "RBO" with Workpiece Rotation Device (Longitudinal-Crosswise) 90° C) Portal CNC-controlled Dowel Hole Boring Machine "BIESSE" FTT 800 Center A: No. 2 Electrospindles ISO 30 (each 3.7 kW) with tool holder magazine, each with 3 positions. Center B: No. 2 provisions for installation of 2 additional electrospindles No. 2 Tool Holder Magazines (Turret) with 56 positions each No. 4 upper boring units (total 128 vertical spindles + 36 horizontal spindles) D) Transfer Conveyor with Turner (180° top-side down) "RBO" Model Ribaltatore E) Portal CNC-controlled Dowel Hole Boring and Dowel Insertion Machine "BIESSE" FTT 800 R8 No. 2 horizontal units (1 left + 1 right) with 4 BH18 heads with 18 spindles each (36 right + 36 left), total 72 Center A: No. 2 Electrospindles ISO 30 (each 4.5 kW) with 3 tool holder magazines each. Center B: No. 2 provisions for installation of 2 additional electrospindles No. 2 Tool Holder Magazines (Chain) with 60 positions each No. 4 upper boring units (total 128 vertical spindles + 36 horizontal spindles) F) "BIESSE" RD Dowel Insertion Unit No. 2 horizontal units (1 right + 1 left) with 5 insertion nozzles each (5 left + 5 right), total 10 nozzles Gusdpfx Abegvdkgjmjk G) Stacking Station (Double Portal Station) "RBO" Model Advantage SC

Sąlyga: labai geros būklės (naudotas), ONE-SIDED DESTACKING STATION - Upper traverse transversely movable by 180° (horizontal) - Console table with vacuum clamps Gujdpfx Abed Tyvxemek - Internal lifting platform with motorized sheet metal roller conveyor - Front protective fence, movable - Separate control cabinet and operator panel - External roller conveyor for stacking panels from destacking unit - External driven roller conveyor from destacking unit, also with belt for transfer at 90° angle of the panels - Operating capacity (cycles/min): 12-15 - Panel thickness (min/max) mm: 10 - 40 - Min. panel dimensions mm: 250 x 320 - Max. panel dimensions mm: 1200 x 3000 - Total connected load kW: 11

Sąlyga: labai geros būklės (naudotas), Electronic control unit RT 483 No. 2 motorized throughfeed conveyor belts Feed rate (approx. 55 m/min) No. 2 horizontal drilling supports No. 1 drilling unit for each horizontal drilling support (1 x 1.5 HP) No. 20 spindles for each horizontal drilling unit Max. working width (mm): 3200 Min. working width (mm): 220 Gujdpfxsfz Nanj Abmjk No. 7 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support (2 x 1.8 HP) No. 4 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper supports (2 x 1.8 HP) No. 4 upper vertical workpiece clamps No. 2 endless screws for chip extraction Digital display for position data (axis) Total connected load (kW): 35.1 CNC controls the movement (X-axis) of the horizontal drilling supports CNC controls the movement (Y-axis) of the stops

Sąlyga: labai geros būklės (naudotas), Electronic Programmer NC 400 Feed-through motorized conveyor belts (qty.) 2 Horizontal drilling units (qty.) 2 Drilling heads per horizontal drilling unit (qty.) 2 Spindles per horizontal drilling head (qty.) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (approx.) Gedpfx Aelwqrtobmsuk Lower vertical drilling units (qty.) 6 Drilling heads per lower vertical drilling unit (qty.) 2 Upper vertical workpiece clamps (qty.) 4 Continuous chip extraction screws (qty.) 2 Digital position readout (axis) Total connected load (kW) 27.7 The CNC control operates the movement (X-axis) of the horizontal drilling units. The CNC control operates the movement (Y-axis) of the stops. The CNC controls the movement (Z-axis) of all vertical drilling units.

Sąlyga: labai geros būklės (naudotas), Double-sided FORMAT AND EDGE BANDING MACHINE (1st and/or 2nd machine in a line) Edging material (edge) thickness (min/max) mm: 0.3 – 3 Panel thickness (min/max) mm: 10 – 60 Working width (min/max) mm: 240 – 2700 Control/Software: SINITRA Guedpfx Abeu Tg Uqomok Feed speed (adjustable) m/min: 10 – 40 (INVERTER C.N.) Cam spacing (mm): 500 FORMAT PROCESSING (for each side): - Safety cutter (pre-milling): AS 10 (5.8 kW) - 2 x Chipper DT 10 (5.8 + 5.8 kW) - Spray system (for liquid anti-adhesive) EDGE BANDING UNIT (for each side): - Gluing unit (Hot Melt Glue + Pre-melter) SP30 (High Melt + Edge Guide Z-axis) - Edge pressure zone (CNC-controlled). Edge magazine for rolls (No. 6 positions) - End trimming unit IT 90-S (0.3 kW x2) 28 m/min, 0 - 25°, PNEUMATIC - Multi-profile milling unit (CNC controlled) RF 30 (0.65 kW x2) 0 - 25° - Multifunctional unit (radius milling and contour milling unit) AR 80 (0.3 kW x2) 25 m/min – ROTAX - Motors with automatic tool change (tools with 8+8 positions) Multi-profile scraping unit (CNC controlled) RB 30 Flat scraper unit RC 20 – spray unit (for polishing liquid) Buffing unit SZ 30 (0.37 kW x2) With 'hopper' for panels (usable height mm 80), serves as buffer to accelerate work cycles

Sąlyga: labai geros būklės (naudotas), PC control system type NC 400 Deluxe No. 2 through-feed motorized conveyor belts No. 2 horizontal drilling supports No. 1 drilling unit for each horizontal drilling support Number of spindles per horizontal drilling unit: 20 Maximum working width (mm): 3200 Minimum working width (mm): 205 (approx.) No. 5 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support Gusdpfx Aberm Ik Tsmjk No. 3 upper vertical workpiece clamps No. 2 chip removal conveyor belts Total connected load (kW): The CNC control manages the movement (X-axis) of horizontal drilling supports The CNC control manages the movement (Y-axis) of the stops The CNC controls the movement (X-axis) of the transport belts

Sąlyga: labai geros būklės (naudotas), Complete factory for furniture production, consisting of: KZ2207) "BIESSE" FDT – CNC drilling and dowel-inserting line, comprising: Depalletizing station "RBO" Tornado, 2 x CNC through-feed drilling machines "BIESSE" FDT, 1 x CNC dowel-inserting machine "BIESSE" SDT CN, loading station "RBO" Tornado KZ2205) 4-sided sizing and edge-banding line "HOMAG", comprising: Depalletizing double stations "ESSE2", 1st double-sided sizing and edge-banding machine "HOMAG" PowerLine KF 20/20/QA/15, 90° transfer unit (longitudinal/transverse) "HOMAG" TD 31/30/12, 2nd double-sided sizing and edge-banding machine "HOMAG" PowerLine KF 20/21/QA/35, 2nd 90° transfer unit (transverse/longitudinal) "ESSE2", loading double stations "ESSE2" KZ2210) 'BREMA (BIESSE)' Mod. Vector CNC LINE for Drilling, Milling, and Inserting, comprising: Hedgehog loader (18 positions), CNC Vector GLR 30-13, Vector XL 40-30, Idrak-3, various transfer units KZ2090) Sanding machine (veneer sanding machine) "COSTA LEVIGATRICE" SN TR TT TT TR 1350 KZ2045) Gantry CNC with edge banding "MORBIDELLI" Planet HP6018 (2 tables, 6 edge magazines) KZ2033) Edge banding machine "HOMAG" KAL 310 with destacking-feed "ESSE2" KZ2075) Furniture assembly line "TERMOPAK" with continuous case clamp Guodpfoh T Dvtex Abmek KZ2203) Sawing line "SALVADOR" (panel cross-cut + splitter/rip saw) with destacking "ESSE2" KZ2009) Veneer department (double-knife veneer pack cutter "MONGUZZI", crosscutting shear "MONGUZZI"; splicing machine "KUPER", veneer bundle cutter "TAGLIABUE", etc.) KZ2201) Press line "COLOMBO REMO" (mm 1400x6200) for veneer/laminated panels KZ2215) Automatic panel storage system "ESSE2" Mod. MAGAZZINO No. 3 sawdust filter stations "MION" (1st: 132 kW, 2nd: 55 kW, 3rd: 22 kW) Various vehicles (trucks, vans, etc.) Many other machines (CNC BIESSE Skipper 130, drilling machines VITAP and MORBIDELLI, circular saws, glue application machines, etc.), extraction system, roller conveyors, shelves (wall racks), forklifts, pallet trucks, and much more. The machines are still installed at the user's site and can be viewed by appointment.

Sąlyga: labai geros būklės (naudotas), Longitudinal panel saw (splitter) for grooving and/or cutting a single panel into two parts - Min. panel length: 500 mm - Max. panel length: 2700 mm Gjdpeu Tqb Usfx Abmeuk - Min. panel width: approx. 300 mm - Max. panel width: 700 mm - Panel thickness (min./max.): 10 / 30 mm - Max. feed speed: 50 m/min (4 kW) - Total installed power: 43.2 kW The machine consists of the following units: POS. 1: Milling unit for underside grooving (7.4 kW), max. diameter 300 mm POS. 2: Lower scoring saw (7.4 kW), max. diameter 350 mm POS. 3: Upper scoring saw (7.4 kW), max. diameter 350 mm POS. 4: Lower main saw blade (separator/ splitter blade) (7.4 kW), max. diameter 350 mm

Sąlyga: labai geros būklės (naudotas), CNC-controlled (automatic) drilling and dowel insertion line, consisting of: O03009A) AUTOMATIC DRILLING MACHINE "BIESSE" Techno Logic, with CNC control No. 2 through-feed motorised belts, feed rate up to 75 m/min. No. 2 horizontal drilling units (each with 2 drilling heads of 1.8 HP each and 22 drilling spindles each); No. 5 lower drilling units (each with 2 split and reversible drilling heads of 1.8 HP each and various drilling heads each); No. 3 upper drilling units (each with 2 split and reversible drilling heads of 1.8 HP each and various drilling heads each); No. 5 upper vertical workpiece clamps. Gjdpfew Uhbkox Abmjuk No. 2 (endless) screws for chip removal. PC control, type CNI. O03009B) AUTOMATIC DRILLING AND DOWEL INSERTION MACHINE "BIESSE" Techno INFOR with CNC No. 2 through-feed motorised belts, feed rate up to 75 m/min No. 2 horizontal drilling units (each with 6 horizontal supports – gluing and dowel insertion tools) No. 2 lower drilling units (each with 2 split and reversible drilling heads of 1.8 HP each and various drilling heads each); No. 2 upper vertical workpiece clamps. No. 2 (endless) screws for chip removal.

Sąlyga: labai geros būklės (naudotas), Double-sided FORMAT and EDGE BANDING MACHINE (First machine in a production line) Edge banding material (thickness min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 270 - 1200 Control / Software: SINITRA Feed speed (adjustable) (m/min): 10 - 40 (INVERTER C.N.) Safety and noise protection cabin Side adjustment of aggregate carrier: manual Gusdpjt N Ix Rsfx Abmsk FORMAT PROCESSING (each side): 2 x Hogger DT 10 (5.8 kW x 2) Space for jointing unit FS Jointing aggregate ES30 + ER30 (5 kW x 2), 0° - 90° Universal milling unit Softforming SF 10 (2 x 2.4 kW), 0° - 45° Spraying device (for liquid non-stick agent) EDGE BANDING SECTION (each side): Edging unit (Hot-melt glue + pre-melter) SP3/SF, SP40 (HighMelt + Edge Control EC 40) Preheating RP 10 Edge pressure zone (CNC controlled) Pressure roller track (revolver) for straight and shaped (softforming) edges Soft PF40 (4 positions), 800 mm (Shears CI10+CS10+RL10) - Edge magazine for coils (no. 6 positions) Milling unit RS 10 (1.3 kW x 2) Milling unit Softforming RF 10 / SF (0.65 kW x 2) Multi-profile milling unit RF 30 (0.65 kW x 2) Universal milling unit for grooving/rabbetting and profiling FB 30 (4.5 kW x 2), 0 - 90° Multi-profile scraper unit RB 30 Flat scraper unit RC 05 / Soft Spray units (for polishing fluid) + buffing unit SZ 30 (0.37 kW x 2)

Sąlyga: labai geros būklės (naudotas), Double-sided FORMAT and EDGE BANDING MACHINE (1st and/or 2nd machine in a production line) Roll material (edges) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 240 - 2700 Control/Software: SINITRA Feed speed (adjustable) m/min: 10 - 40 (INVERTER C.N.) Safety and soundproof cabin Manual side adjustment of unit carrier Cam pitch (mm): 500 SIZING UNIT (for each side): Protective cutter (pre-milling) AS 10 (5.8 kW) 2 x hoggers DT 10 (5.8 + 5.8 kW) Spraying device (for liquid anti-adhesive) EDGEBANDING SECTION (for each side): Gluing unit (hot-melt glue + premelter) SP30 (High Melt + Edge Control EC 40) Edge pressure section (CNC controlled). Edge magazine for rolls (No. 6 positions) Gujdpohvahhofx Abmek End trimming unit IT 90-S (0.65 kW x 2) 28 m/min, 0 - 25°. PNEUMATIC Multi-profile milling unit (CNC controlled) RF 40 (1 kW x 2) 0 - 25° Multifunction unit (radius and form milling unit) AR 80 (0.65 kW x 2) 25 m/min, ROTAX motors with automatic tool changer (tools) 2 universal milling units for grooving, rebating, and profiling FB 30 (5 kW x 2) 0 - 90° Multi-profile scraper unit (CNC controlled) RBK - 503 (2 positions) Flat scraper unit RC 20 Spraying unit (for polishing liquid) Buffing unit SZ 30 (0.37 kW x 2)

Sąlyga: labai geros būklės (naudotas), PC control type NC 400, Biesse software No. 2 throughfeed motorized conveyor belts Feed speed (m/min) 35 - 75 No. 2 horizontal drilling supports Dowel insertion systems (and glue injection units) No. 5+5 Max. working width (mm) 3200 Min. working width (mm) 235 No. 6 lower vertical drilling supports Drilling units per lower vertical drilling support (No.) 2 x 1.5 kW No. 2 upper vertical workpiece clamps No. 2 endless screws for chip removal Total connected load (kW) CNC-controlled movement (X-axis) of the horizontal drilling supports Gujdpsd Nuwijfx Abmsk CNC-controlled movement (Y-axis) of the stops

Sąlyga: labai geros būklės (naudotas), DOUBLE-SIDED SIZING AND EDGE BANDING LINE (Half Line) with automatic high-speed handling system: Gujdpehvah Nsfx Abmsk A) FEEDING STATION (gantry) "RBO" Model Advantage C 320 double station, complete with central motorized roller conveyor. B) ROTARY TRANSFER UNIT (longitudinal/crosswise) with double cone "RBO" Model GPK-1 C) Double-sided sizing and edge banding machine "BIESSE" Model Stream SB2 11.0 D) ROTARY TURNER (180° inversion, top face down) "RBO" Model Ribaltatore E) ROTARY TRANSFER UNIT (crosswise/longitudinal) with double cone "RBO" Model GPK-2 F) STACKING STATION (gantry) "RBO" Model Advantage SC 3200 double station, complete with central motorized roller conveyor.

Sąlyga: labai geros būklės (naudotas), CNC-controlled (automatic) through-feed drilling line. Also suitable for NARROW PARTS, minimum width 100 mm W05024F) AUTOMATIC THROUGH-FEED DRILLING MACHINE "BIESSE" Techno FDT, with CNC - No. 2 horizontal drilling units (each with 2 drilling heads, each with 1.5 HP and 11 drilling spindles); - No. 6 lower drilling units (each with 2 drilling heads, each with 2.3 HP and various drilling heads); Gusdeu Tp Slspfx Abmok - No. 4 upper drilling units (each with 2 drilling heads, each with 2.3 HP and various drilling heads); - No. 6 upper vertical workpiece clamps + No. 2 continuous screws for chip extraction CNC control unit - PC DESK TOP (Module Editor) - software Tooling System W05024G) AUTOMATIC THROUGH-FEED DRILLING MACHINE "BIESSE" Techno FDT, with CNC - No. 2 horizontal drilling units (each with 2 drilling heads, each with 1.5 HP and 11 drilling spindles); - No. 6 lower drilling units (each with 2 drilling heads, each with 2.3 HP and various drilling heads); - No. 3 upper drilling units (each with drilling heads of 2.3 HP and various drilling heads); - No. 6 upper vertical workpiece clamps - No. 2 continuous screws for chip extraction 2nd drilling machine connected to the CNC of the 1st machine.