Nuėmimo įrenginys

BIESSE RBO WINNER SC

Sąlyga: labai geros būklės (naudotas), DOUBLE-SIDED DESTACKER - Bridge design Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 horizontal upper support beam (with carriage running on it) No. 1 motorized carriage with horizontal metal arms No. 2 horizontal metal arms with adjustable vacuum suction cups No. 2 external roller conveyors for stacking of panels from the destacker No. 1 external motorized roller conveyor from destacker, also with belt drive for 90° panel transfer. Dimensions: 7168 mm (approx.) Separate electrical control panel OMRON electronic control system Gsdpfx Abed Rg Dzsdoil Perimeter safety fence with safety mats Operating capacity (cycles/min): approx. 16 - 20 Panel thickness (min/max): approx. 10 – 50 mm Min. panel size: approx. 250 x 320 mm Max. panel size: approx. 1200 x 3200 mm Total connected load: 20.8 kW

Sąlyga: naudotas, SANDWICH PANEL PRODUCTION LINE FOR DOORS AND WALLS UP TO 610 MM WIDTH, manufactured by METECO This sandwich panel production line is designed for manufacturing door and wall panels up to 610mm in width, with an annual capacity of 1,500,000 m panel/year. MAIN PRODUCTION DATA Width: 500 - 610 mm Thickness: 40 - 80 mm Capacity: 1,500,000 m panel/year TECHNICAL SPECIFICATIONS Line speed: 12 m/min Maximum coil weight: 10 tons Maximum external coil diameter: 1400 mm Internal coil diameter: 508 mm Maximum sheet width: 610 mm Maximum panel thickness: 80 mm Power supply: 400 V Gsdpfxsvtpcis Abdjil Frequency: 50 Hz SCOPE OF SUPPLY 1. Upper Sheet Processing Section - 10T top decoiler with coil car - Roller and pinch feed - Upper coil steel frame - Polyethylene film applicator - Embossing machine for texture patterns - Decorative pattern press - Upper roller forming machine (12 stands) - Upper steel frame for forming machine - Upper sheet guide 2. Lower Sheet Processing Section - 10T double bottom decoiler with coil car - Polyethylene film applicator - Corona treatment machine - Embossing machine - Lower roller forming machine (12 stands) - Roller conveyor - Operator desk for entry line 3. Panel Forming Section - Hot air preheating oven - Sheet guiding unit - Steel reinforcement machine - High-pressure foaming plant - Foam portal - Foaming cabin - Side sealing and tape applicator system - Double-press conveyor - Double-belt heating system - Double-belt press - Outfeed roller conveyor - Cutting saw - Soundproof cabin - Dust extraction unit - Operator control station 4. Stacking Section - Automatic panel tilting unit - Stacking conveyor - Outfeed conveyor - Packing section - Spacer-feeder polystyrene system - Infeed conveyor - Packing machine - Outfeed conveyor - Packing machine 5. Panel Production Equipment - Upper roll forming tools - Lower roll forming tools 6. List of Additional Machines - Station for containers: polyol, isocyanate and additives - Pentane tank and accessories Width: 500 - 610 mm Line speed: 12 m/min Thickness: 40-80 mm Maximum coil weight: 10 tons Maximum external coil diameter: 1400 mm Internal coil diameter: 508 mm Maximum sheet width: 610 mm Maximum panel thickness: 80 mm Power supply: 400 V Frequency: 50 Hz Capacity: 1,500,000 m panel/year

Sąlyga: geras (naudotas), Various heavy-duty roller conveyors, suitable for use as casting or cooling lines, immediately ready for operation Gedjd Tx Ahopfx Abdjil

Sąlyga: labai geros būklės (naudotas), Coating and packaging line with thermoregulated shrink film, consisting of: Giodpfxogp Diae Abdel a) Double conveyor belt (3000 mm x 1100 mm) for the application of corner protection devices. - Adjustable feed speed from 3 to 15 m/min. b) Stretch wrapping machine Mod. Compact 250/6R with motorized conveyor belt - Total machine length (with motorized conveyor) approx. 7600 mm - Reel holder (6 upper reels max. width 2450 mm + 6 lower reels max. width 1450 mm) - Cutting and cross sealing machine (2500 mm) - Max. usable height 700 mm - Installed power 12 kW - With automatic device for packaging lightweight parts (from 1 to 5 kg) using sealing bar c) Heat shrink tunnel - Total length approx. 4700 mm (of which approx. 3700 mm is tunnel) with hot air circulation (heated by electric resistors and fan), total installed power kW ? - Conveyor with metal rods (width approx. 1500 mm) - Max. usable height 700 mm - Adjustable feed speed from approx. 4 to 20 m/min d) "ELME" outfeed roller conveyor (idle rollers) for cooling (from approx. 3000 x 1500 mm)

Sąlyga: labai geros būklės (naudotas), ONE-SIDED DESTACKING STATION - Upper traverse, horizontally shiftable by 180° - Console table with vacuum clamps Gjdpfxecggy Se Abdjil - Lift table (internal) with motorized sheet metal roller conveyor - Front safety guard, movable - Separate control cabinet and operating panel - External roller conveyor for transporting the stack of sheets from destacking - External driven roller conveyor from destacking, optionally with belt for 90° transfer of sheets - Operating capacity (cycles/min): 12-15 - Plate thickness (min/max) mm: 10 - 40 - Min. plate dimensions mm: 250 x 320 - Max. plate dimensions mm: 1200 x 3000 - Total connected load Kw: 10

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2005, A Hennecke HK135 high-pressure polyurethane foaming system with four 25,000-liter mixing tanks, one casting robot, and two release agent robots is available. Output: 225 tons/24h, Mold carriers: 42, Additive mixing stations: 10, Mixing head type: MQ, max. operating pressure: 180 bar, pressure vessels: 330 bar. Foam types: rigid foam, integral rigid foam, semi-rigid integral foam, semi-rigid filling foam, cold-curing flexible foam, hot-curing flexible foam. Multi-mold foaming is possible. Complete documentation is available. An on-site inspection is possible. Godpfottbd Nsx Abdjil

Sąlyga: labai geros būklės (naudotas), TECHNISCHE DATEN NICHT VON DIESER MASCHINE Rücklaufeinrichtung für Kantenanleimmaschine (LINKS) In Kombination mit einer einseitigen Kantenanleimmaschine ermöglicht sie einem einzelnen Bediener die kontinuierliche Beschickung der Maschine. Luftschleierbank, Einlauf und Auslauf (Gesamtabmessungen 3.520 x 2.560 mm) Gijdpfjff R Tqjx Abdjl 180°-Transfer (3.120 x 2.140 mm) mit motorisierten Rollenbahnen und motorisierten Bändern Motorisierte Fördermatte (9.080 x 1.560 mm) Werkstückmaße (MIN/MAX): Länge – 240 mm / 2.800 mm Breite – 120 mm / 1.300 mm Dicke – 8 mm / 60 mm, optional bis 100 mm

Sąlyga: geras (naudotas), ORMA LCC44/14 CONTINUOUS PRESS LINE WITH INFEED CONVEYOR AND OUTFEED CONVEYOR OSAMA GLUING MACHINE TYPE S4R/P-1400, 4 ROLLERS Gijdpfovtx Hkox Abdel

Sąlyga: geras (naudotas), Roller conveyors and chain conveyors Gsdsd Sf Rqepfx Abdoil

Sąlyga: labai geros būklės (naudotas), GANTRY LOADER with DOUBLE LOADING STATION Vacuum system (with its pump) No. 4 vertical columns supporting the upper crossbeam No. 1 upper horizontal crossbeam (for the movement of the motorized trolley) No. 1 motorized trolley to which horizontal arms are attached No. 2 adjustable horizontal metal arms with vacuum suction cups No. 2 floor-mounted rollers for feeding panel stacks into the Loader No. 1 motorized roller table (delivering panels to the Unloader), with additional cross motorized conveyor belts (at 90°). Dimensions approx. 7,232 mm Separate electrical and control panel OMRON electronic controls Perimeter safety and protection metal fences Working capacity (cycles/minute): approx. 16 - 20 Minimum/maximum board thickness: approx. 10 – 50 mm Minimum panel size: approx. 250 x 320 mm Maximum panel size: approx. 1,200 x 3,200 mm Installed power: 23.3 kW Gedpfed Rg Dpsx Abdjil