Biesse Rover 20 pirkti naudotą (332)

Sąlyga: labai geros būklės (naudotas), PC control type NC 400 (software) Through-feed motorized conveyor belts (qty.) 2 Horizontal drilling supports (qty.) 2 Drilling units per horizontal drilling support (qty.) 2 Spindles per horizontal drilling unit (qty.) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (approx.) Lower vertical drilling supports (qty.) 6 Drilling units per lower vertical drilling support (qty.) 2 Godpfogk T Ttox Aczjtt Upper vertical drilling supports (qty.) 4 Spindles per drilling unit of the upper drilling supports (qty.) 2 Upper vertical workpiece clamps (qty.) 5 Continuous screws for chip removal (qty.) 2 Digital display of position data (axes) Total connected load (kW) 48 The CNC control system manages the movement (X-axis) of the horizontal drilling supports. The CNC control system manages the movement (Y-axis) of the stops.

Sąlyga: labai geros būklės (naudotas), CNC-controlled Flexible Automatic Throughfeed Boring and Dowel Insertion Line Min/Max Workpiece (Panel) Width (X-axis) with FTT: 240 / 3100 mm Min/Max Workpiece (Panel) Thickness (Z-axis) with FTT: 12 / 60 mm Min/Max Workpiece (Panel) Length-Depth (Y-axis) with FTT: 140 / 1550 mm (or 800+800) A) Loading Station (Double Gantry Loader) "RBO" Model Advantage C B) Skewed Roller Conveyor "RBO" with Workpiece Rotation Device (Longitudinal-Crosswise) 90° C) Portal CNC-controlled Dowel Hole Boring Machine "BIESSE" FTT 800 Center A: No. 2 Electrospindles ISO 30 (each 3.7 kW) with tool holder magazine, each with 3 positions. Gsdpfxogvdkge Aczstt Center B: No. 2 provisions for installation of 2 additional electrospindles No. 2 Tool Holder Magazines (Turret) with 56 positions each No. 4 upper boring units (total 128 vertical spindles + 36 horizontal spindles) D) Transfer Conveyor with Turner (180° top-side down) "RBO" Model Ribaltatore E) Portal CNC-controlled Dowel Hole Boring and Dowel Insertion Machine "BIESSE" FTT 800 R8 No. 2 horizontal units (1 left + 1 right) with 4 BH18 heads with 18 spindles each (36 right + 36 left), total 72 Center A: No. 2 Electrospindles ISO 30 (each 4.5 kW) with 3 tool holder magazines each. Center B: No. 2 provisions for installation of 2 additional electrospindles No. 2 Tool Holder Magazines (Chain) with 60 positions each No. 4 upper boring units (total 128 vertical spindles + 36 horizontal spindles) F) "BIESSE" RD Dowel Insertion Unit No. 2 horizontal units (1 right + 1 left) with 5 insertion nozzles each (5 left + 5 right), total 10 nozzles G) Stacking Station (Double Portal Station) "RBO" Model Advantage SC

Sąlyga: labai geros būklės (naudotas), ONE-SIDED DESTACKING STATION - Upper traverse transversely movable by 180° (horizontal) - Console table with vacuum clamps - Internal lifting platform with motorized sheet metal roller conveyor - Front protective fence, movable Gedod Tyvxspfx Aczott - Separate control cabinet and operator panel - External roller conveyor for stacking panels from destacking unit - External driven roller conveyor from destacking unit, also with belt for transfer at 90° angle of the panels - Operating capacity (cycles/min): 12-15 - Panel thickness (min/max) mm: 10 - 40 - Min. panel dimensions mm: 250 x 320 - Max. panel dimensions mm: 1200 x 3000 - Total connected load kW: 11

Sąlyga: labai geros būklės (naudotas), Electronic control unit RT 483 No. 2 motorized throughfeed conveyor belts Feed rate (approx. 55 m/min) No. 2 horizontal drilling supports Gsdpjfz Nanefx Aczjtt No. 1 drilling unit for each horizontal drilling support (1 x 1.5 HP) No. 20 spindles for each horizontal drilling unit Max. working width (mm): 3200 Min. working width (mm): 220 No. 7 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support (2 x 1.8 HP) No. 4 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper supports (2 x 1.8 HP) No. 4 upper vertical workpiece clamps No. 2 endless screws for chip extraction Digital display for position data (axis) Total connected load (kW): 35.1 CNC controls the movement (X-axis) of the horizontal drilling supports CNC controls the movement (Y-axis) of the stops

Sąlyga: labai geros būklės (naudotas), PC control system type NC 400 Deluxe No. 2 through-feed motorized conveyor belts No. 2 horizontal drilling supports No. 1 drilling unit for each horizontal drilling support Number of spindles per horizontal drilling unit: 20 Maximum working width (mm): 3200 Minimum working width (mm): 205 (approx.) No. 5 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support No. 3 upper vertical workpiece clamps No. 2 chip removal conveyor belts Total connected load (kW): Godpfx Aerm Ik Tjczett The CNC control manages the movement (X-axis) of horizontal drilling supports The CNC control manages the movement (Y-axis) of the stops The CNC controls the movement (X-axis) of the transport belts

Sąlyga: labai geros būklės (naudotas), Double-sided FORMAT AND EDGE BANDING MACHINE (1st and/or 2nd machine in a line) Edging material (edge) thickness (min/max) mm: 0.3 – 3 Panel thickness (min/max) mm: 10 – 60 Working width (min/max) mm: 240 – 2700 Control/Software: SINITRA Feed speed (adjustable) m/min: 10 – 40 (INVERTER C.N.) Cam spacing (mm): 500 FORMAT PROCESSING (for each side): - Safety cutter (pre-milling): AS 10 (5.8 kW) - 2 x Chipper DT 10 (5.8 + 5.8 kW) Gedeu Tg Uqjpfx Aczstt - Spray system (for liquid anti-adhesive) EDGE BANDING UNIT (for each side): - Gluing unit (Hot Melt Glue + Pre-melter) SP30 (High Melt + Edge Guide Z-axis) - Edge pressure zone (CNC-controlled). Edge magazine for rolls (No. 6 positions) - End trimming unit IT 90-S (0.3 kW x2) 28 m/min, 0 - 25°, PNEUMATIC - Multi-profile milling unit (CNC controlled) RF 30 (0.65 kW x2) 0 - 25° - Multifunctional unit (radius milling and contour milling unit) AR 80 (0.3 kW x2) 25 m/min – ROTAX - Motors with automatic tool change (tools with 8+8 positions) Multi-profile scraping unit (CNC controlled) RB 30 Flat scraper unit RC 20 – spray unit (for polishing liquid) Buffing unit SZ 30 (0.37 kW x2) With 'hopper' for panels (usable height mm 80), serves as buffer to accelerate work cycles

Sąlyga: labai geros būklės (naudotas), Longitudinal panel saw (splitter) for grooving and/or cutting a single panel into two parts - Min. panel length: 500 mm - Max. panel length: 2700 mm - Min. panel width: approx. 300 mm Gtedpfxou Tqb Uo Aczot - Max. panel width: 700 mm - Panel thickness (min./max.): 10 / 30 mm - Max. feed speed: 50 m/min (4 kW) - Total installed power: 43.2 kW The machine consists of the following units: POS. 1: Milling unit for underside grooving (7.4 kW), max. diameter 300 mm POS. 2: Lower scoring saw (7.4 kW), max. diameter 350 mm POS. 3: Upper scoring saw (7.4 kW), max. diameter 350 mm POS. 4: Lower main saw blade (separator/ splitter blade) (7.4 kW), max. diameter 350 mm

Sąlyga: labai geros būklės (naudotas), CNC-controlled (automatic) drilling and dowel insertion line, consisting of: O03009A) AUTOMATIC DRILLING MACHINE "BIESSE" Techno Logic, with CNC control No. 2 through-feed motorised belts, feed rate up to 75 m/min. No. 2 horizontal drilling units (each with 2 drilling heads of 1.8 HP each and 22 drilling spindles each); No. 5 lower drilling units (each with 2 split and reversible drilling heads of 1.8 HP each and various drilling heads each); No. 3 upper drilling units (each with 2 split and reversible drilling heads of 1.8 HP each and various drilling heads each); No. 5 upper vertical workpiece clamps. No. 2 (endless) screws for chip removal. Gtsdpfxow Uhbke Aczst PC control, type CNI. O03009B) AUTOMATIC DRILLING AND DOWEL INSERTION MACHINE "BIESSE" Techno INFOR with CNC No. 2 through-feed motorised belts, feed rate up to 75 m/min No. 2 horizontal drilling units (each with 6 horizontal supports – gluing and dowel insertion tools) No. 2 lower drilling units (each with 2 split and reversible drilling heads of 1.8 HP each and various drilling heads each); No. 2 upper vertical workpiece clamps. No. 2 (endless) screws for chip removal.

Sąlyga: labai geros būklės (naudotas), Complete factory for furniture production, consisting of: KZ2207) "BIESSE" FDT – CNC drilling and dowel-inserting line, comprising: Depalletizing station "RBO" Tornado, 2 x CNC through-feed drilling machines "BIESSE" FDT, 1 x CNC dowel-inserting machine "BIESSE" SDT CN, loading station "RBO" Tornado KZ2205) 4-sided sizing and edge-banding line "HOMAG", comprising: Depalletizing double stations "ESSE2", 1st double-sided sizing and edge-banding machine "HOMAG" PowerLine KF 20/20/QA/15, 90° transfer unit (longitudinal/transverse) "HOMAG" TD 31/30/12, 2nd double-sided sizing and edge-banding machine "HOMAG" PowerLine KF 20/21/QA/35, 2nd 90° transfer unit (transverse/longitudinal) "ESSE2", loading double stations "ESSE2" KZ2210) 'BREMA (BIESSE)' Mod. Vector CNC LINE for Drilling, Milling, and Inserting, comprising: Hedgehog loader (18 positions), CNC Vector GLR 30-13, Vector XL 40-30, Idrak-3, various transfer units KZ2090) Sanding machine (veneer sanding machine) "COSTA LEVIGATRICE" SN TR TT TT TR 1350 KZ2045) Gantry CNC with edge banding "MORBIDELLI" Planet HP6018 (2 tables, 6 edge magazines) Gtjdpfx Ajh T Dvteczjt KZ2033) Edge banding machine "HOMAG" KAL 310 with destacking-feed "ESSE2" KZ2075) Furniture assembly line "TERMOPAK" with continuous case clamp KZ2203) Sawing line "SALVADOR" (panel cross-cut + splitter/rip saw) with destacking "ESSE2" KZ2009) Veneer department (double-knife veneer pack cutter "MONGUZZI", crosscutting shear "MONGUZZI"; splicing machine "KUPER", veneer bundle cutter "TAGLIABUE", etc.) KZ2201) Press line "COLOMBO REMO" (mm 1400x6200) for veneer/laminated panels KZ2215) Automatic panel storage system "ESSE2" Mod. MAGAZZINO No. 3 sawdust filter stations "MION" (1st: 132 kW, 2nd: 55 kW, 3rd: 22 kW) Various vehicles (trucks, vans, etc.) Many other machines (CNC BIESSE Skipper 130, drilling machines VITAP and MORBIDELLI, circular saws, glue application machines, etc.), extraction system, roller conveyors, shelves (wall racks), forklifts, pallet trucks, and much more. The machines are still installed at the user's site and can be viewed by appointment.

Sąlyga: labai geros būklės (naudotas), DOUBLE-SIDED SIZING AND EDGE BANDING LINE (Half Line) with automatic high-speed handling system: A) FEEDING STATION (gantry) "RBO" Model Advantage C 320 double station, complete with central motorized roller conveyor. B) ROTARY TRANSFER UNIT (longitudinal/crosswise) with double cone "RBO" Model GPK-1 C) Double-sided sizing and edge banding machine "BIESSE" Model Stream SB2 11.0 Gtodpfx Acohvah Nozet D) ROTARY TURNER (180° inversion, top face down) "RBO" Model Ribaltatore E) ROTARY TRANSFER UNIT (crosswise/longitudinal) with double cone "RBO" Model GPK-2 F) STACKING STATION (gantry) "RBO" Model Advantage SC 3200 double station, complete with central motorized roller conveyor.

Sąlyga: labai geros būklės (naudotas), Double-sided FORMAT and EDGE BANDING MACHINE (First machine in a production line) Edge banding material (thickness min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 270 - 1200 Control / Software: SINITRA Feed speed (adjustable) (m/min): 10 - 40 (INVERTER C.N.) Safety and noise protection cabin Gedpfx Aet N Ix Rsczjtt Side adjustment of aggregate carrier: manual FORMAT PROCESSING (each side): 2 x Hogger DT 10 (5.8 kW x 2) Space for jointing unit FS Jointing aggregate ES30 + ER30 (5 kW x 2), 0° - 90° Universal milling unit Softforming SF 10 (2 x 2.4 kW), 0° - 45° Spraying device (for liquid non-stick agent) EDGE BANDING SECTION (each side): Edging unit (Hot-melt glue + pre-melter) SP3/SF, SP40 (HighMelt + Edge Control EC 40) Preheating RP 10 Edge pressure zone (CNC controlled) Pressure roller track (revolver) for straight and shaped (softforming) edges Soft PF40 (4 positions), 800 mm (Shears CI10+CS10+RL10) - Edge magazine for coils (no. 6 positions) Milling unit RS 10 (1.3 kW x 2) Milling unit Softforming RF 10 / SF (0.65 kW x 2) Multi-profile milling unit RF 30 (0.65 kW x 2) Universal milling unit for grooving/rabbetting and profiling FB 30 (4.5 kW x 2), 0 - 90° Multi-profile scraper unit RB 30 Flat scraper unit RC 05 / Soft Spray units (for polishing fluid) + buffing unit SZ 30 (0.37 kW x 2)

Sąlyga: labai geros būklės (naudotas), PC control type NC 400, Biesse software No. 2 throughfeed motorized conveyor belts Feed speed (m/min) 35 - 75 No. 2 horizontal drilling supports Dowel insertion systems (and glue injection units) No. 5+5 Max. working width (mm) 3200 Min. working width (mm) 235 No. 6 lower vertical drilling supports Drilling units per lower vertical drilling support (No.) 2 x 1.5 kW No. 2 upper vertical workpiece clamps No. 2 endless screws for chip removal Total connected load (kW) Gedsd Nuwiopfx Aczstt CNC-controlled movement (X-axis) of the horizontal drilling supports CNC-controlled movement (Y-axis) of the stops

Sąlyga: labai geros būklės (naudotas), Double-sided FORMAT and EDGE BANDING MACHINE (1st and/or 2nd machine in a production line) Roll material (edges) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 240 - 2700 Control/Software: SINITRA Feed speed (adjustable) m/min: 10 - 40 (INVERTER C.N.) Safety and soundproof cabin Manual side adjustment of unit carrier Cam pitch (mm): 500 SIZING UNIT (for each side): Protective cutter (pre-milling) AS 10 (5.8 kW) 2 x hoggers DT 10 (5.8 + 5.8 kW) Gtodpfx Acehvahhszot Spraying device (for liquid anti-adhesive) EDGEBANDING SECTION (for each side): Gluing unit (hot-melt glue + premelter) SP30 (High Melt + Edge Control EC 40) Edge pressure section (CNC controlled). Edge magazine for rolls (No. 6 positions) End trimming unit IT 90-S (0.65 kW x 2) 28 m/min, 0 - 25°. PNEUMATIC Multi-profile milling unit (CNC controlled) RF 40 (1 kW x 2) 0 - 25° Multifunction unit (radius and form milling unit) AR 80 (0.65 kW x 2) 25 m/min, ROTAX motors with automatic tool changer (tools) 2 universal milling units for grooving, rebating, and profiling FB 30 (5 kW x 2) 0 - 90° Multi-profile scraper unit (CNC controlled) RBK - 503 (2 positions) Flat scraper unit RC 20 Spraying unit (for polishing liquid) Buffing unit SZ 30 (0.37 kW x 2)

Sąlyga: labai geros būklės (naudotas), 3-axis (X-Y-Z) CNC MACHINING CENTER Mobile table (workpiece), movable machining head - Vertical table (workpiece) Control system: TPA - Software: Albatros Safety enclosure for the machining head Workpiece feed with transport chain Rubber rollers for securing the workpiece during feed and machining Infeed table (with conveyor belt) - Outfeed table (with conveyor belt) With automatic workpiece return system to the operator (180°) Minimum working area (X - Y - Z) mm: 260 x 40 x 10 (approx.) Maximum working area (X - Y - Z) mm: unlimited x 1300 x 80 (approx.) Separate electrical and control panel Total connected load (kW): 35 WORKING UNITS: Drilling unit with vertical spindles (quantity): 1 Independent vertical drilling spindles (quantity): 24 (7 in X + 17 in Y) Drilling unit with horizontal spindles (quantity): 2 Independent horizontal drilling spindles (quantity): 36 (9+9 = 18 x 2) Motor power, drilling head (kW): 3 x 3 (approx.) Gsdpfxsihfiij Aczstt Vertical main spindle (milling unit) quantity: 1 Vertical main spindle motor power (kW): 7.5 (approx.) Automatic tool changer system, turret - Magazine positions: 10 tool stations

Sąlyga: labai geros būklės (naudotas), CNC-controlled (automatic) through-feed drilling line. Also suitable for NARROW PARTS, minimum width 100 mm Gtedpfx Aceu Tp Slozot W05024F) AUTOMATIC THROUGH-FEED DRILLING MACHINE "BIESSE" Techno FDT, with CNC - No. 2 horizontal drilling units (each with 2 drilling heads, each with 1.5 HP and 11 drilling spindles); - No. 6 lower drilling units (each with 2 drilling heads, each with 2.3 HP and various drilling heads); - No. 4 upper drilling units (each with 2 drilling heads, each with 2.3 HP and various drilling heads); - No. 6 upper vertical workpiece clamps + No. 2 continuous screws for chip extraction CNC control unit - PC DESK TOP (Module Editor) - software Tooling System W05024G) AUTOMATIC THROUGH-FEED DRILLING MACHINE "BIESSE" Techno FDT, with CNC - No. 2 horizontal drilling units (each with 2 drilling heads, each with 1.5 HP and 11 drilling spindles); - No. 6 lower drilling units (each with 2 drilling heads, each with 2.3 HP and various drilling heads); - No. 3 upper drilling units (each with drilling heads of 2.3 HP and various drilling heads); - No. 6 upper vertical workpiece clamps - No. 2 continuous screws for chip extraction 2nd drilling machine connected to the CNC of the 1st machine.

Sąlyga: labai geros būklės (naudotas), Dvipusė mašina, kurią galima pastatyti linijoje po pervaromą daugiašpylių gręžtuvą, skirtą automatiniam gręžimo ir kaiščių įstatymo ciklui. - Elektroninis programuotojas „CNI" NC 400 - Integruota valdymo ir elektros spinta - Didžiausias atstumas tarp horizontalių galvų: apie 3200 mm - Judama ir reguliuojama mašinos dešinė pusė (pagal plokščių plotį) - 2 vnt. motorizuotų transporterių juostų (po 0,25 AG kiekvienai, iš viso 2 varikliai) - 1+1 kaiščių talpyklos automatiškam jų padavimui į antgalius - 6+6 horizontalūs įstatymo antgaliai (klijų įpurškimo ir kaiščių įstatymo įrenginiai) - Aukšto slėgio klijų padavimo sistema - Bendra instaliuota galia: apie 5 kW. Gtjdpfx Aew Ug A Hoczot

Sąlyga: labai geros būklės (naudotas), CNC-controlled (automatic) throughfeed drilling line, comprising: W05022F) AUTOMATIC THROUGHFEED DRILLING MACHINE "BIESSE" Techno FDT with CNC - No. 2 horizontal drilling supports (each with 2 drilling heads, each with 1.8 kW and 11 drilling spindles each); - No. 6 lower drilling supports (each with 2 drilling heads, each with 1.8 kW and various drilling heads); - No. 3 upper drilling supports (each with 2 drilling heads, each with 1.8 kW and various drilling heads); - No. 5 upper vertical workpiece clamps + No. 2 continuous screws for chip removal Gedet Ig A Sepfx Aczett CNC control: NC 500 (software: Tooling System + Woodmaster) W05022G) AUTOMATIC THROUGHFEED DRILLING MACHINE "BIESSE" Techno FDT with CNC - No. 2 horizontal drilling supports (each with 2 drilling heads, each with 1.8 kW and 11 drilling spindles each); - No. 6 lower drilling supports (each with 2 drilling heads, each with 1.8 kW and various drilling heads); - No. 3 upper drilling supports (each with drilling heads of 1.8 kW and various drilling heads); - No. 5 upper vertical workpiece clamps - No. 2 continuous screws for chip removal 2nd drilling machine is connected to the NC of the 1st machine.

Sąlyga: labai geros būklės (naudotas), PC control, type NC 400 No. 2 motorized through-feed conveyor belts No. 2 horizontal drilling supports No. 2 drilling units for each horizontal drilling support Spindles per horizontal drilling unit (qty): 11 Max. working width (mm): 3200 Min. working width (mm): 205 (approx.) No. 5 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support No. 2 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling support Gjdpfeidqd Tox Aczott No. 4 upper vertical workpiece clamps Chip conveyor belt Digital position display (axis) Total connected load (kW): 59.1 The CNC control manages the movement (X-axis) of the horizontal drilling supports The CNC control manages the movement (Y-axis) of the stops The CNC controls the movement (X-axis) of the conveyor belts

Sąlyga: labai geros būklės (naudotas), PC control type NC 400 No. 2 motorized through-feed conveyor belts No. 2 horizontal drilling supports No. 2 drilling units for each horizontal drilling support Spindles per horizontal drilling unit (qty.) 11 Gtsdpfoidqf Rex Aczst Max. working width (mm): 3200 Min. working width (mm): approx. 205 No. 6 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support No. 3 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling supports No. 5 upper vertical workpiece clamps Chip conveyor belt Digital display of positional data (axis) Total connected load (kW): 59.1 The CNC control operates the movement (X-axis) of the horizontal drilling supports The CNC control operates the movement (Y-axis) of the stops The CNC controls the movement (X-axis) of the transport belts

Sąlyga: labai geros būklės (naudotas), Automatic Throughfeed Drilling and Dowel Inserting Line (2 machines), consisting of: W12054A) AUTOMATIC DRILLING MACHINE "BIESSE" Techno FDT - 2 powered throughfeed conveyors, feed rate up to 75 m/min - 2 horizontal drilling units (each with 2 drilling heads, each 1.8 HP and 22 drilling spindles) - 5 lower drilling units (each with 2 split and reversible drilling heads, each 2.3 HP and various drilling heads) - 1 upper drilling unit (with 2 split and reversible drilling heads, each 2.3 HP and various drilling heads) Gtodpfx Aovnq Txeczjt - 5 upper vertical workpiece clamps - 2 endless screws for chip extraction CNC control (software module Tooling System) for both machines. W12054B) AUTOMATIC DRILLING AND DOWEL INSERTING MACHINE "BIESSE" Techno SDT - 2 powered throughfeed conveyors, feed rate up to 75 m/min - 2 horizontal drilling units (each with 8 horizontal units – glue application and dowel insertion tools) - 3 lower drilling units (each with 2 split and reversible drilling heads, each 2.3 HP and various drilling heads) - 1 upper drilling unit (with 2 split and reversible drilling heads, each 2.3 HP and various drilling heads) - 3 upper vertical workpiece clamps - 2 endless screws for chip extraction

Sąlyga: labai geros būklės (naudotas), PC control unit type NC 400 (with software for managing work cycles) No. 2 through-feed motorised conveyor belts Max. working width (mm): 3200 - Min. working width (mm): approx. 205 No. 2 horizontal drilling supports No. 2 drilling units on each horizontal drilling support Spindles per horizontal drilling unit (No.): 11 No. 4 lower vertical drilling supports No. 2 drilling units on each lower vertical drilling support No. 2 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling supports No. 2 upper vertical workpiece clamps No. 2 endless screws for chip removal Digital position display (axis) Total connected load (kW): 25 The CNC controls the (X-axis) movement of the horizontal drilling supports. The CNC controls the (Y-axis) movement of the stops. OPTION: Front loading system (for narrow parts: Min 60mm - Max 260mm) Gtjdpfji D D Tfox Aczet

Sąlyga: labai geros būklės (naudotas), Electronic machine, CNC-controlled, PC control unit type NC 500 – Tooling System software No. 2 powered conveyor belts – feed speed (m/min) approx. 35–75 No. 2 horizontal drilling supports Drilling units per horizontal support (qty) 2 x 1.8 HP Max. working width (mm) 3200 – Min. working width (mm) 215 No. 7 lower vertical drilling supports Drilling units per lower vertical support (qty) 2 x 1.8 HP No. 3 upper vertical drilling supports Spindles per upper drilling support (qty) 2 x 1.8 HP No. 5 upper vertical workpiece clamps No. 2 screw conveyors (endless) for chip extraction CNC controls movement (X-axis) of horizontal drilling supports CNC controls movement (Hv) of the 2 horizontal drilling supports CNC controls movement (X-axis) of vertical drilling supports CNC controls movement (axes Y1 and Y2) of the drilling units CNC controls movement (Y-axis) of the stops CNC controls movement (X-axis) of the workpiece clamps CNC controls movement (X-axis) of the conveyor belts Gtsdohvi Duepfx Aczjt The CNC controller manages all programming of automatic work cycles.

Sąlyga: labai geros būklės (naudotas), Double-sided FORMAT and EDGE BANDING MACHINE (1st and/or 2nd machine in a line) Edgeband Material (edges) Thickness (min/max) mm: 0.3 – 3 Panel Thickness (min/max) mm: 10 – 60 Working Width (min/max) mm: 240 – 2700 Control: PC Base Windows / SINITRA Software Feed Speed (variable) m/min: 10 – 40 (INVERTER CNC) Cam Pitch (mm): 500 FORMATTING UNIT (for each side): - Safety milling cutter (pre-milling) AS 10 (5.8 kW) pneumatic - 2 x Chipper cutters DT 10 (5.8 + 5.8 kW) - Spraying device (for liquid non-stick agent) EDGE BANDING UNIT (for each side): - 1st Gluing unit (hot melt glue + pre-melter) SP30 (High Melt + Edge Control EC 40) - 2nd Gluing unit (pre-melter with hot air) Air Force System - Edge pressure zone (CNC-controlled). Edge magazine for rolls (6 positions) - End trimming unit IT 90-X (0.65 kW x 2) 28 m/min, 0 – 25° Gedpju Rc Anefx Aczott - Pre-milling unit RS 10 (2 x 2 kW) - Multi-profile milling unit (CNC-controlled) RF 40 (1 x 2 kW) 0 – 25° - Multifunctional unit (radius milling and contour milling) AR 80 (0.65 kW x 2) 25 m/min ROTAX. Revolver 8+8 stations (max. 25 m/min) - Motors with automatic tool change (tools) - Multi-profile scraping unit (CNC-controlled) RB 40 (multi-profile) - Flat scraper unit RC 20 + spraying units (for polishing fluid) - Buffing unit SZ 30 (0.37 kW x 2)

Sąlyga: labai geros būklės (naudotas), Double-sided – First machine in a processing line Double-sided (1 LEFT single-sided machine + 1 RIGHT single-sided machine) Edge thickness with rolls (min/max) mm 0.3 – 3 Panel thickness (min/max) mm 10 / 60 Working width (min/max) mm 100 / 1200 Control system: PC Base Windows / Software PC / SINTRA Feed speed (adjustable) m/min 10 – 40 (C.N. INVERTER) FORMAT PROCESSING (per side): Spray unit (for liquid release agent) No. 2 hoggers DT 10 (5.8 kW x 2) Empty space EDGEBANDING SECTION (per side): 1st gluing unit (Hot Melt + premelter) SP 30 (High Melt + Edge Control EC 40) Gtedpfxou Rc Hyo Aczjt 2nd gluing unit (premelter with hot air) Air Force System Edge pressure zone (CNC controlled) + edge magazine for rolls (No. 6 positions) Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC controlled) RF 40 (2 x 1 kW) 0°-25° No. 1 universal milling unit for grooving/rebating/profiling EB 60 (1 x 5 kW) - ISO 30 motor Multi-profile scraper unit (CNC controlled) RB 40 Flat scraper unit RC 20 Spray unit (for polishing fluid) Buffing unit SZ 30 (2 x 0.37 kW)

Sąlyga: labai geros būklės (naudotas), Flexible N.C. Automatiklinie zum Bohren, Fräsen und Einpressen von Beschlägen. Numerische Steuerung mit Albatros-Software. Bestehend aus: KZ2046) Einlauf mit Igel (Puffer-)Speicher (18 Positionen) KZ2047) Übergabe mit motorisiertem Förderband KZ2048) CNC Modell Vector GLR-X 30-13 KZ2049) Übergabe mit motorisiertem Förderband KZ2050) CNC Modell Vektor XK 40-13 Gtjdpfx Aceidmkrszet KZ2051) Übergabe mit motorisiertem Förderband KZ2052) CNC Modell Idrak 3 KZ2053) Übergabe mit motorisiertem Teppichband mit 90° Umlenkung auf einem Rollentisch KZ2054) Rollenförderer mit ebenfalls motorisierten Bändern (zum Bewegen der Platten um 180° zu den Montagelinien)