Vienpusės kraštų apklijavimo mašinos

BIESSE STREAM B1 7.0

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, ruošinio aukštis (maks.): 60 mm, ruošinio plotis (maks.): 1 300 mm, ruošinio ilgis (maks.): 3 200 mm, briaunos storis (maks.): 3 mm, Įranga: CE žymėjimas, TECHNICAL DETAILS Max. feed speed: 24 m/min Maximum panel thickness: 60 mm Min. panel height: 10 mm Max. panel height: 60 mm Min. panel length: 320 mm Max. panel length: 3,200 mm Min. panel width: 150 mm Max. panel width: 1,300 mm Min. edge thickness: 0.3 mm Max. edge thickness: 3 mm Number of working units: 8 UNITS Trimming Unit 1 Unit: Trimming corrections Model: RT30 Iisdpfx Ajxw T Tpjbvjb Motor power: 3.5 kW Max. speed: 9,000 rpm Edge Processing Unit 1 Unit: End trimming Model: IT90-S Number of motors: 2 Max. processing speed: 28 m/min Motor power: 0.65 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Edge milling Model: RF10 Number of motors: 2 Motor power: 1 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multifunction Model: AR30 Number of motors: 2 Max. processing speed: 18 m/min Motor power: 0.65 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Edge scraper Model: RB40 Edge Processing Unit 5 Unit: Glue scraper Model: RC20 Edge Processing Unit 6 Unit: Brush Model: SZ30 Number of motors: 2 Motor power: 0.37 kW Max. speed: 1,400 rpm MACHINE DETAILS Total installed power: 25 kW Dimensions Conveyor length: 12,300 mm Width: 1,300 mm Length: 12,300 mm EQUIPMENT Jointing cutter Multifunction unit Top pressure Pressure by rubber-coated belts Panel support guide NC positioning Panel introduction system at an angle Automatic engagement by time Edge heating lamps Coil magazine Glue pot for hotmelt adhesive Prefuser for hotmelt adhesive Edge press roller track Spraying unit Machine programming software: SINTRA Panel ejection with transfer roller track Panel feed with motorized conveyor belt Part return for left-hand edge bander CE marking

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2024, Manufacturer: Elumatec Type SA/ SAS 142 Overhaul year: 2024 Max. carbide saw blade: 500 mm Saw motor drive power: 4 kW Saw motor speed: 2,800 rpm Saw blade cutting speed (500 mm): 4,400 m/min Saw height adjustment: infinitely variable, fully electronic Working range, square at 90° max.: 130 x 130 mm Working range, flat at 90° max.: 190 x 130 mm Working range, round at 90° max.: 150 mm Feed length, pneumatic: 5–560, 10–1,120 mm Compressed air connection, on-site: 6 bar Weight (saw) approx.: 800 kg Dimensions LxWxH (saw) approx.: 2,900 mm x 1,400 mm x 1,500 mm Required installation space LxW: 2,900 mm x 1,400 mm Additional Description Elumatec SA/ SAS 142 4 kW Retrofit Elumatec SA 142 4 kW Retrofit Fully automatic saw for non-ferrous metals and plastics Iijdpsuiy Nyofx Abveb The machine is in like-new technical and optical condition after completion of the retrofit. The machine is fully refurbished at our facility according to customer requirements. The following points have been renewed, among others: - Conversion to Siemens S7 PLC control system - Conversion to Siemens HMI operator panel - New electrical components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve manifolds - Maintenance of minimum quantity lubrication system - Replacement of common wear parts - Overhaul of the enclosure Warranty: Unless otherwise agreed, we offer a 6-month warranty on all parts overhauled or replaced by us. Labor and wear parts are excluded from the warranty. Options: - Extension of the sawing range for flat material, 90° max.: 300 x 120 mm - Chip breaker extension (for high-quality cut surfaces without drag marks) - Servo-controlled material feed - Servo-controlled saw blade feed - Heavy-duty clamping device for the gripper feed - Delivery and installation at your facility - Training of your personnel

Būklė: naudotas, Gamybos metai: 2014, bendras aukštis: 2 400 mm, bendras ilgis: 4 500 mm, bendras plotis: 2 200 mm, Color: Grey Unladen weight: 2,500 kg CNC Machining Center Biesse Skill 12 24 G FT Year of manufacture: 2014 Machine no.: 60961 Spindle mount: HSK F63 10x vertical drilling units 12 tool changer positions Software: BiesseWorks X-axis: 2,465 mm Y-axis: 1,260 mm Z-axis: 324 mm Disassembled for transport on a standard trailer; 4,500 x 2,200 x 2,400 mm; Net weight: 2,000 kg - Special notes: - Note: The pallet with the white control cabinet is not part of this machine - Year of manufacture: 2014 - Documentation available: Yes - CE certificate: No - Serial number: 60961 - Number of milling spindles: 1 - Table type: Flatbed - Drilling tools included: Yes - Vertical drilling spindles: 10 - Tool changer positions: 12 - Vacuum pump included: Yes - Quantity: 1 - Brand: Becker - Working area X [mm]: 2,465 - Working area Y [mm]: 1,260 - Z-axis working area [mm]: 324 - Transport dimensions: 4,500 mm x 2,200 mm x 2,400 mm (L x W x H) Iiedpfx Abownhanjvsb - Transport weight [kg]: 2,500 kg - Number of transport packages: 1 Financial Information VAT: The stated price is plus VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all items from the industrial sector Glenn Smeets

Būklė: labai geros būklės (naudotas), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Working head safety cabin. Complete machine safety enclosure Infeed support table (workpiece support). Outfeed table (with conveyor belts) Workpiece feed with no. 3 conveyor belts (feed speed (m/min) max approx. 130) Minimum workpiece dimensions (X-Y-Z) mm 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinets. Total installed power (kW) 99 No. 2 WORKING UNITS (TOP): (SERVO-MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles 40) No. 3 WORKING UNITS (BOTTOM): (SERVO-MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles 240) No. 2 WORKING UNITS (HORIZONTAL): Isdpfsgwbbqsx Abvsib No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + no. 21 horizontal drilling spindles (left side) No. 8 injection nozzles for glue application and dowel insertion (right side) No. 8 injection nozzles for glue application and dowel insertion (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONAL: BARCODE (WIRELESS SCANNER)

Būklė: naudotas, mašinos/transporto priemonės numeris: 008161, Sumontuotos briaunos tipas: plona briauna, stora briauna Klijavimo sistema: EVA, PUR Kraštų frezavimas: taip Daugiafunkcinis agregatas: taip Maks. padavimo greitis: 14 m/min Maksimalus plokštės storis: 60 mm Iedpox A Tlcjfx Abvsib Darbo agregatai: 6 vnt.

Būklė: naudotas, Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 5 980 mm, bendras plotis: 3 380 mm, bendras ilgis: 3 074 mm, keliamoji galia vienai sandėliavimo sekcijai: 460 kg, įėjimo įtampa: 400 V, Automated Warehouse Optimization Storage System KARDEX Shuttle XP500 System Type: SHUTTLE-XP-500-3050x864 Control: C2000, with B/W OP2000 display Serial No.: 07006421/001 Year of manufacture: 2007 Total Load Capacity: 2x33,500 kg Load per Tray: 460 kg (evenly distributed) Tray Dimensions: 3050 x 864 mm Number of Trays: 32 units (more upon request) Shuttle Dimensions W x D x H: 3380 x 3074 x 5980 mm (height of Kardex is adjustable to available clearance) Shuttle Depth with Full Tray Extraction Table: 4198 mm Power Supply: 3/N/PE400 V, 17 A, 50/60 Hz, 8.6 kVA This offer is valid while the system remains unsold Technical details per Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 32 trays, Medium X Type 2, 460 kg each, evenly distributed; additional trays available on request. - Tray size: 3050 x 864 mm - Machine dimensions (W x D x H): 3380 x 3074 (4198) x 5980 mm - System footprint approximately: 14.19 m² - Capacity with 32 trays: approx. 84 m²; each tray is approx. 2.64 m² - Electronic volume measurement system, 25 mm display (grid) - Access opening with sliding doors for personnel and goods protection - C2000 control with graphical OP-C2000 B/W display - LED anti-glare lighting above access point - Toothed-belt drive for minimal noise operation - Toothed-belt drive for high-speed order picking - Tray heights adjustable in 25 mm increments via support profile configuration; essential for high-density storage - Automatic full tray extraction table Price: On request by e-mail only Price: excl. VAT, including transport and installation Lead time: immediately from stock Machinehandel De Leeuw BV specializes in used machines and accessories for the machining industry, as well as pre-owned paternoster systems from manufacturers such as Kardex, Hanel/Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automatic storage systems like Kardex Shuttle XP and XPlus. Iedpownanksfx Abvjib Machinehandel De Leeuw BV Oordeelsestraat 7 – b 5111 PA Baarle-Nassau The Netherlands

Būklė: labai geros būklės (naudotas), PANEL SAW ANGLE SYSTEM Control: OSI Plus - Optiplanning Software No. 2 powered roller conveyors, each approx. 4500 x 2200 mm Lift table (mm): 4500 x 2200 1st pusher saw with 5 grippers Rotating device (for panels) up to 90° 1st panel saw max. cutting width (mm): 4500 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed (m/min): 1 - 170 Shear for waste material reduction 2nd pusher saw with 10 grippers 2nd panel saw max. cutting width (mm): 2200 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed (m/min): 1 - 170 No. 2 front air cushion tables (mm 2200 x 1500) Isdoukhd Ajpfx Abvoib Automatic unloader (bridge) for cut panels: "RBO (BIESSE)" model Lifter with no. 6 stacking positions

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, Darbo laukas X: 6 400 mm Darbo laukas Y: 1 500 mm Frezavimo galvučių skaičius: 1 Pagrindinis variklis: 13 kW Maksimalus apsisukimų skaičius: 24 000 aps./min Įrankių tvirtinimo sistema: HSK-F63 Įrankių keitimo padėtys: 8 Vertikalių gręžimo galvų: 20 Horizontalių grąžtų X: 4 Horizontalių grąžtų Y: 4 2 vakuuminiai siurbliai po 360 m³/h Nesting Iedpfx Aswlcqvsbvoib Nuotolinio valdymo pultas Programinė įranga: BIESSE WORKS Matmenys: 11 004 × 5 334 mm Svoris: 4 900 kg

Būklė: dilaminuotas dirbtuvėje (naudotas), DOUBLE-SIDED SQUARING AND EDGE BANDING MACHINE – 1st machine in line Edge thickness in rolls (min/max): 0.3 / 3 mm Panel thickness (min/max): 8 / 45 mm Working width (min/max): 236 / 1300 mm Control/Software: ICOS Open Ijdpfxedh Tfge Abvsib Feed speed (adjustable): 10 / 50 m/min No transmission bar (Master & Slave systems) Safety and noise protection cabin SQUARING SECTION (per side): Spray unit (for liquid release agent) Interchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free position EDGE BANDING SECTION (per side): Gluing unit (Hot Melt + premelter) 04.1570 Pressure zone for edging Edgeband magazine for rolls (compartment no.): 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Flush trimming unit 08.517 Spray unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free position

Gamybos metai: 2001, būklė: naudotas, • Heating plate size (mm): approx. 1500 x 2700 Iiedpfx Abjkt N Husvob • Max. usable area (mm): 1250 x 2450 • Loading side (mm): 1500