Biesse Rover 18 pirkti naudotą (324)

Sąlyga: labai geros būklės (naudotas), DOUBLE-SIDED SIZING AND EDGE BANDING LINE (Half Line) with automatic high-speed handling system: Itsdohvah Njpfx Af Iob A) FEEDING STATION (gantry) "RBO" Model Advantage C 320 double station, complete with central motorized roller conveyor. B) ROTARY TRANSFER UNIT (longitudinal/crosswise) with double cone "RBO" Model GPK-1 C) Double-sided sizing and edge banding machine "BIESSE" Model Stream SB2 11.0 D) ROTARY TURNER (180° inversion, top face down) "RBO" Model Ribaltatore E) ROTARY TRANSFER UNIT (crosswise/longitudinal) with double cone "RBO" Model GPK-2 F) STACKING STATION (gantry) "RBO" Model Advantage SC 3200 double station, complete with central motorized roller conveyor.

Sąlyga: labai geros būklės (naudotas), PC control type NC 400, Biesse software No. 2 throughfeed motorized conveyor belts Feed speed (m/min) 35 - 75 No. 2 horizontal drilling supports Dowel insertion systems (and glue injection units) No. 5+5 Itoded Nuwiopfx Af Isb Max. working width (mm) 3200 Min. working width (mm) 235 No. 6 lower vertical drilling supports Drilling units per lower vertical drilling support (No.) 2 x 1.5 kW No. 2 upper vertical workpiece clamps No. 2 endless screws for chip removal Total connected load (kW) CNC-controlled movement (X-axis) of the horizontal drilling supports CNC-controlled movement (Y-axis) of the stops

Sąlyga: labai geros būklės (naudotas), Double-sided FORMAT and EDGE BANDING MACHINE (First machine in a production line) Edge banding material (thickness min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 270 - 1200 Control / Software: SINITRA Feed speed (adjustable) (m/min): 10 - 40 (INVERTER C.N.) Safety and noise protection cabin Side adjustment of aggregate carrier: manual FORMAT PROCESSING (each side): 2 x Hogger DT 10 (5.8 kW x 2) Space for jointing unit FS Jointing aggregate ES30 + ER30 (5 kW x 2), 0° - 90° Universal milling unit Softforming SF 10 (2 x 2.4 kW), 0° - 45° Itodpfx Ast N Ix Ref Ieb Spraying device (for liquid non-stick agent) EDGE BANDING SECTION (each side): Edging unit (Hot-melt glue + pre-melter) SP3/SF, SP40 (HighMelt + Edge Control EC 40) Preheating RP 10 Edge pressure zone (CNC controlled) Pressure roller track (revolver) for straight and shaped (softforming) edges Soft PF40 (4 positions), 800 mm (Shears CI10+CS10+RL10) - Edge magazine for coils (no. 6 positions) Milling unit RS 10 (1.3 kW x 2) Milling unit Softforming RF 10 / SF (0.65 kW x 2) Multi-profile milling unit RF 30 (0.65 kW x 2) Universal milling unit for grooving/rabbetting and profiling FB 30 (4.5 kW x 2), 0 - 90° Multi-profile scraper unit RB 30 Flat scraper unit RC 05 / Soft Spray units (for polishing fluid) + buffing unit SZ 30 (0.37 kW x 2)

Sąlyga: labai geros būklės (naudotas), 3-axis (X-Y-Z) CNC MACHINING CENTER Mobile table (workpiece), movable machining head - Vertical table (workpiece) Control system: TPA - Software: Albatros Safety enclosure for the machining head Workpiece feed with transport chain Rubber rollers for securing the workpiece during feed and machining Infeed table (with conveyor belt) - Outfeed table (with conveyor belt) With automatic workpiece return system to the operator (180°) Minimum working area (X - Y - Z) mm: 260 x 40 x 10 (approx.) Maximum working area (X - Y - Z) mm: unlimited x 1300 x 80 (approx.) Separate electrical and control panel Total connected load (kW): 35 Iodpfx Afjihfiio Ijtb WORKING UNITS: Drilling unit with vertical spindles (quantity): 1 Independent vertical drilling spindles (quantity): 24 (7 in X + 17 in Y) Drilling unit with horizontal spindles (quantity): 2 Independent horizontal drilling spindles (quantity): 36 (9+9 = 18 x 2) Motor power, drilling head (kW): 3 x 3 (approx.) Vertical main spindle (milling unit) quantity: 1 Vertical main spindle motor power (kW): 7.5 (approx.) Automatic tool changer system, turret - Magazine positions: 10 tool stations

Sąlyga: labai geros būklės (naudotas), CNC-controlled (automatic) through-feed drilling line. Also suitable for NARROW PARTS, minimum width 100 mm W05024F) AUTOMATIC THROUGH-FEED DRILLING MACHINE "BIESSE" Techno FDT, with CNC - No. 2 horizontal drilling units (each with 2 drilling heads, each with 1.5 HP and 11 drilling spindles); Itjdpfx Aju Tp Slof Ieb - No. 6 lower drilling units (each with 2 drilling heads, each with 2.3 HP and various drilling heads); - No. 4 upper drilling units (each with 2 drilling heads, each with 2.3 HP and various drilling heads); - No. 6 upper vertical workpiece clamps + No. 2 continuous screws for chip extraction CNC control unit - PC DESK TOP (Module Editor) - software Tooling System W05024G) AUTOMATIC THROUGH-FEED DRILLING MACHINE "BIESSE" Techno FDT, with CNC - No. 2 horizontal drilling units (each with 2 drilling heads, each with 1.5 HP and 11 drilling spindles); - No. 6 lower drilling units (each with 2 drilling heads, each with 2.3 HP and various drilling heads); - No. 3 upper drilling units (each with drilling heads of 2.3 HP and various drilling heads); - No. 6 upper vertical workpiece clamps - No. 2 continuous screws for chip extraction 2nd drilling machine connected to the CNC of the 1st machine.

Sąlyga: labai geros būklės (naudotas), Dvipusė mašina, kurią galima pastatyti linijoje po pervaromą daugiašpylių gręžtuvą, skirtą automatiniam gręžimo ir kaiščių įstatymo ciklui. - Elektroninis programuotojas „CNI" NC 400 - Integruota valdymo ir elektros spinta - Didžiausias atstumas tarp horizontalių galvų: apie 3200 mm - Judama ir reguliuojama mašinos dešinė pusė (pagal plokščių plotį) - 2 vnt. motorizuotų transporterių juostų (po 0,25 AG kiekvienai, iš viso 2 varikliai) - 1+1 kaiščių talpyklos automatiškam jų padavimui į antgalius - 6+6 horizontalūs įstatymo antgaliai (klijų įpurškimo ir kaiščių įstatymo įrenginiai) - Aukšto slėgio klijų padavimo sistema - Bendra instaliuota galia: apie 5 kW. Itedpfsw Ug A Hsx Af Isb

Sąlyga: labai geros būklės (naudotas), PANEL SAW ANGLE SYSTEM Control: OSI Plus - Optiplanning Software No. 2 powered roller conveyors, each approx. 4500 x 2200 mm Lift table (mm): 4500 x 2200 1st pusher saw with 5 grippers Rotating device (for panels) up to 90° 1st panel saw max. cutting width (mm): 4500 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed (m/min): 1 - 170 Shear for waste material reduction 2nd pusher saw with 10 grippers 2nd panel saw max. cutting width (mm): 2200 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed (m/min): 1 - 170 Itjdpfx Aeukhd Ajf Isb No. 2 front air cushion tables (mm 2200 x 1500) Automatic unloader (bridge) for cut panels: "RBO (BIESSE)" model Lifter with no. 6 stacking positions

Sąlyga: labai geros būklės (naudotas), CNC-controlled (automatic) throughfeed drilling line, comprising: W05022F) AUTOMATIC THROUGHFEED DRILLING MACHINE "BIESSE" Techno FDT with CNC - No. 2 horizontal drilling supports (each with 2 drilling heads, each with 1.8 kW and 11 drilling spindles each); - No. 6 lower drilling supports (each with 2 drilling heads, each with 1.8 kW and various drilling heads); - No. 3 upper drilling supports (each with 2 drilling heads, each with 1.8 kW and various drilling heads); - No. 5 upper vertical workpiece clamps + No. 2 continuous screws for chip removal CNC control: NC 500 (software: Tooling System + Woodmaster) W05022G) AUTOMATIC THROUGHFEED DRILLING MACHINE "BIESSE" Techno FDT with CNC - No. 2 horizontal drilling supports (each with 2 drilling heads, each with 1.8 kW and 11 drilling spindles each); - No. 6 lower drilling supports (each with 2 drilling heads, each with 1.8 kW and various drilling heads); - No. 3 upper drilling supports (each with drilling heads of 1.8 kW and various drilling heads); Itedpst Ig A Sefx Af Ijb - No. 5 upper vertical workpiece clamps - No. 2 continuous screws for chip removal 2nd drilling machine is connected to the NC of the 1st machine.

Sąlyga: labai geros būklės (naudotas), Automatic Throughfeed Drilling and Dowel Inserting Line (2 machines), consisting of: W12054A) AUTOMATIC DRILLING MACHINE "BIESSE" Techno FDT Isdsvnq Txepfx Af Ijtb - 2 powered throughfeed conveyors, feed rate up to 75 m/min - 2 horizontal drilling units (each with 2 drilling heads, each 1.8 HP and 22 drilling spindles) - 5 lower drilling units (each with 2 split and reversible drilling heads, each 2.3 HP and various drilling heads) - 1 upper drilling unit (with 2 split and reversible drilling heads, each 2.3 HP and various drilling heads) - 5 upper vertical workpiece clamps - 2 endless screws for chip extraction CNC control (software module Tooling System) for both machines. W12054B) AUTOMATIC DRILLING AND DOWEL INSERTING MACHINE "BIESSE" Techno SDT - 2 powered throughfeed conveyors, feed rate up to 75 m/min - 2 horizontal drilling units (each with 8 horizontal units – glue application and dowel insertion tools) - 3 lower drilling units (each with 2 split and reversible drilling heads, each 2.3 HP and various drilling heads) - 1 upper drilling unit (with 2 split and reversible drilling heads, each 2.3 HP and various drilling heads) - 3 upper vertical workpiece clamps - 2 endless screws for chip extraction

Sąlyga: labai geros būklės (naudotas), PC control, type NC 400 No. 2 motorized through-feed conveyor belts No. 2 horizontal drilling supports No. 2 drilling units for each horizontal drilling support Itsdpfx Aoidqd Tof Ijb Spindles per horizontal drilling unit (qty): 11 Max. working width (mm): 3200 Min. working width (mm): 205 (approx.) No. 5 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support No. 2 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling support No. 4 upper vertical workpiece clamps Chip conveyor belt Digital position display (axis) Total connected load (kW): 59.1 The CNC control manages the movement (X-axis) of the horizontal drilling supports The CNC control manages the movement (Y-axis) of the stops The CNC controls the movement (X-axis) of the conveyor belts

Sąlyga: labai geros būklės (naudotas), PC control type NC 400 No. 2 motorized through-feed conveyor belts No. 2 horizontal drilling supports No. 2 drilling units for each horizontal drilling support Spindles per horizontal drilling unit (qty.) 11 Max. working width (mm): 3200 Min. working width (mm): approx. 205 Ijdpfxoidqf Rs Af Istb No. 6 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support No. 3 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling supports No. 5 upper vertical workpiece clamps Chip conveyor belt Digital display of positional data (axis) Total connected load (kW): 59.1 The CNC control operates the movement (X-axis) of the horizontal drilling supports The CNC control operates the movement (Y-axis) of the stops The CNC controls the movement (X-axis) of the transport belts

Sąlyga: labai geros būklės (naudotas), Double-sided FORMAT and EDGE BANDING MACHINE (1st and/or 2nd machine in a line) Edgeband Material (edges) Thickness (min/max) mm: 0.3 – 3 Panel Thickness (min/max) mm: 10 – 60 Working Width (min/max) mm: 240 – 2700 Control: PC Base Windows / SINITRA Software Feed Speed (variable) m/min: 10 – 40 (INVERTER CNC) Cam Pitch (mm): 500 FORMATTING UNIT (for each side): Ijdpsu Rc Anjfx Af Ijtb - Safety milling cutter (pre-milling) AS 10 (5.8 kW) pneumatic - 2 x Chipper cutters DT 10 (5.8 + 5.8 kW) - Spraying device (for liquid non-stick agent) EDGE BANDING UNIT (for each side): - 1st Gluing unit (hot melt glue + pre-melter) SP30 (High Melt + Edge Control EC 40) - 2nd Gluing unit (pre-melter with hot air) Air Force System - Edge pressure zone (CNC-controlled). Edge magazine for rolls (6 positions) - End trimming unit IT 90-X (0.65 kW x 2) 28 m/min, 0 – 25° - Pre-milling unit RS 10 (2 x 2 kW) - Multi-profile milling unit (CNC-controlled) RF 40 (1 x 2 kW) 0 – 25° - Multifunctional unit (radius milling and contour milling) AR 80 (0.65 kW x 2) 25 m/min ROTAX. Revolver 8+8 stations (max. 25 m/min) - Motors with automatic tool change (tools) - Multi-profile scraping unit (CNC-controlled) RB 40 (multi-profile) - Flat scraper unit RC 20 + spraying units (for polishing fluid) - Buffing unit SZ 30 (0.37 kW x 2)

Sąlyga: labai geros būklės (naudotas), Double-sided – First machine in a processing line Double-sided (1 LEFT single-sided machine + 1 RIGHT single-sided machine) Edge thickness with rolls (min/max) mm 0.3 – 3 Panel thickness (min/max) mm 10 / 60 Working width (min/max) mm 100 / 1200 Control system: PC Base Windows / Software PC / SINTRA Feed speed (adjustable) m/min 10 – 40 (C.N. INVERTER) FORMAT PROCESSING (per side): Spray unit (for liquid release agent) No. 2 hoggers DT 10 (5.8 kW x 2) Empty space Itjdpfsu Rc Hysx Af Ijb EDGEBANDING SECTION (per side): 1st gluing unit (Hot Melt + premelter) SP 30 (High Melt + Edge Control EC 40) 2nd gluing unit (premelter with hot air) Air Force System Edge pressure zone (CNC controlled) + edge magazine for rolls (No. 6 positions) Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC controlled) RF 40 (2 x 1 kW) 0°-25° No. 1 universal milling unit for grooving/rebating/profiling EB 60 (1 x 5 kW) - ISO 30 motor Multi-profile scraper unit (CNC controlled) RB 40 Flat scraper unit RC 20 Spray unit (for polishing fluid) Buffing unit SZ 30 (2 x 0.37 kW)

Sąlyga: labai geros būklės (naudotas), Electronic machine, CNC-controlled, PC control unit type NC 500 – Tooling System software No. 2 powered conveyor belts – feed speed (m/min) approx. 35–75 No. 2 horizontal drilling supports Drilling units per horizontal support (qty) 2 x 1.8 HP Max. working width (mm) 3200 – Min. working width (mm) 215 No. 7 lower vertical drilling supports Drilling units per lower vertical support (qty) 2 x 1.8 HP No. 3 upper vertical drilling supports Itsdpohvi Dusfx Af Isb Spindles per upper drilling support (qty) 2 x 1.8 HP No. 5 upper vertical workpiece clamps No. 2 screw conveyors (endless) for chip extraction CNC controls movement (X-axis) of horizontal drilling supports CNC controls movement (Hv) of the 2 horizontal drilling supports CNC controls movement (X-axis) of vertical drilling supports CNC controls movement (axes Y1 and Y2) of the drilling units CNC controls movement (Y-axis) of the stops CNC controls movement (X-axis) of the workpiece clamps CNC controls movement (X-axis) of the conveyor belts The CNC controller manages all programming of automatic work cycles.

Sąlyga: labai geros būklės (naudotas), PC control unit type NC 400 (with software for managing work cycles) No. 2 through-feed motorised conveyor belts Max. working width (mm): 3200 - Min. working width (mm): approx. 205 No. 2 horizontal drilling supports No. 2 drilling units on each horizontal drilling support Spindles per horizontal drilling unit (No.): 11 No. 4 lower vertical drilling supports No. 2 drilling units on each lower vertical drilling support No. 2 upper vertical drilling supports Itedpfsi D D Tfex Af Ijb No. 2 spindles for each drilling unit of the upper drilling supports No. 2 upper vertical workpiece clamps No. 2 endless screws for chip removal Digital position display (axis) Total connected load (kW): 25 The CNC controls the (X-axis) movement of the horizontal drilling supports. The CNC controls the (Y-axis) movement of the stops. OPTION: Front loading system (for narrow parts: Min 60mm - Max 260mm)

Sąlyga: labai geros būklės (naudotas), Flexible N.C. Automatiklinie zum Bohren, Fräsen und Einpressen von Beschlägen. Numerische Steuerung mit Albatros-Software. Bestehend aus: KZ2046) Einlauf mit Igel (Puffer-)Speicher (18 Positionen) KZ2047) Übergabe mit motorisiertem Förderband Itjdpfsidmkrex Af Ijb KZ2048) CNC Modell Vector GLR-X 30-13 KZ2049) Übergabe mit motorisiertem Förderband KZ2050) CNC Modell Vektor XK 40-13 KZ2051) Übergabe mit motorisiertem Förderband KZ2052) CNC Modell Idrak 3 KZ2053) Übergabe mit motorisiertem Teppichband mit 90° Umlenkung auf einem Rollentisch KZ2054) Rollenförderer mit ebenfalls motorisierten Bändern (zum Bewegen der Platten um 180° zu den Montagelinien)

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, Skaitmeniniu būdu valdomi apdirbimo centrai WINLINE WINLINE – tai modernus ir inovatyvus apdirbimo centras, skirtas medinių langų ir durų komponentų gamybai. WINLINE atlieka visus darbo ciklus, įskaitant ruošinių pakrovimą/iškrovimą bei jų pozicionavimą kiekvienai reikalingai operacijai, viską valdant CNC valdikliui. Šis naujas integruotos automatikos lygis leidžia užtikrinti aukščiausią tikslumą. Šis įrenginys iš esmės yra „vieno žmogaus gamykla“: vienas operatorius valdo visą gamybos procesą kiekvienam komponentui be papildomų perėjimų – nuo suformuotų, iš visų pusių apdirbtų detalių iki visiškai paruoštų dalių, tinkamų surinkimui ir dažymui. Operatoriui taip pat lieka laiko atlikti papildomus lango konstrukcijos darbus: profiliavimą, dydžio pritaikymą, elementų surinkimą veržiančiame įrenginyje, furnitūros montavimą, stiklinimą ir kt. WINLINE gali gaminti bet kokio tipo lango komponentus, su įvairaus tipo sujungimais (neigiamas profilis ir kaiščiai, mechaninis tvirtinimas, atviri/uždari špantai ir pan.). Įrenginys užtikrina maksimalų našumą kiekvienu atveju. Fiksavimo mechanizmai suprojektuoti taip, kad detalės būtų stabiliai laikomos, pasiekiamas aukščiausias preciziškumas ir nuolat aukšta paviršiaus kokybė kiekvienoje operacijoje, pašalinami visi žymėjimai bei trinties dilimo pėdsakai, kurie tradicinėse sistemose atsiranda dėl trinties ir detalių slydimo apdirbimo metu. WINLINE darbo grupės pritaikytos intensyviam darbui užtikrinant didelį patikimumą. Ijdownx Agepfx Af Ietb Įrenginys gali būti pilnai integruotas su bet kuria CAD/CAM sistema, leidžiant „nuo projekto tiesiai prie gamybos“. Bazinis įrenginio komplektas apima: Mobilios tiltinės konstrukcijos ir dviguba Y ašis su nepriklausomais vežimėliais Ruonių manipuliatorius: pakrovimas, iškrovimas ir spaustuvų keitimas Automatinė tepimo sistema Daugiasekcinė zona Automatinis plokščių atramų judėjimas Juostinis transporteriu drožlių ir nuopjovų šalinimui Skaitmeninis valdymas (CNC) Asmeninis kompiuteris su 3D vaizdo plokšte ir LCD ekranu Oro kondicionuojama elektros įranga Dokumentacija Priežiūros įrankiai Nuotolinis valdymo pultelis Industry 4.0 – integracija su gamybinėmis sistemomis

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, Die Brema EKO 2.2 ist die neue, kompakte und vielseitige vertikale Bohrmaschine, die die Bearbeitung verschiedener Plattenformate und -stärken bei geringer Stellfläche ermöglicht. Sie ist die ideale Lösung für eine "Just-in-Time"-Produktion, auch bei komplexeren Fräsbearbeitungen. Höchste Maschinenindividualisierung entsprechend den Produktionsanforderungen Maximale Fertigungseffizienz durch Wegfall von Rüstzeiten Ijdpfxjwnx Ivs Af Ietb Großes Spektrum bearbeitbarer Platten Brema EKO 2.2 – CNC-Bearbeitungszentrum für Platten X-Bearbeitungsbereich: 3200 mm Y-Bearbeitungsbereich: 1250 mm Bearbeitbare Platten (Mindest- und Maximalmaße) Maß MIN (mm) MAX (mm) Länge (X) 200 3200 Höhe (Y) 35 1250 Stärke (Z) 8 60 Max. bearbeitbares Plattengewicht: 50 kg (*) Verhältnis Plattenhöhe (Y) / Länge (X) ≤ 0,75 bei Platten bis L = 320 mm (°°) Verhältnis Plattenhöhe (Y) / Länge (X) ≤ 1,5 bei Platten L > 320 mm Bei Minimalplatten, die nur mit einer Greifer-Spannung gehalten werden, sind alle Bearbeitungsarten möglich – ausgenommen jene im Greifereingriffsbereich. Bei Bearbeitung auf Greiferhöhe kann ein Kippen des Werkstücks erforderlich sein. Alle Operationen sind im Einzelfall in Bezug auf Plattenmaße (insbesondere Mindestwerte), Materialart, Beschichtung und Bearbeitungsanforderungen zu prüfen. Arbeitsbereich der Werkzeuge (Mindest- und Maximalmaße, bezogen auf Werkzeugachse) X-Achse Operation MIN (mm) MAX (mm) Bohren 0 3200 Fräsen (mit Elektromotor-Spindel) 0 3200 (^) Nutenfräsen (mit Sägeblatt in X) 0 3200 (^) Y-Achse Operation MIN (mm) MAX (mm) Bohren 0 1250 Fräsen (mit Elektromotor-Spindel) 0 1250 Rf Nutenfräsen (mit Sägeblatt in X) 25 1250 Z-Achse Operation MIN (mm) MAX (mm) Horizontale Bohrungen 0 35° Ru (^) Mit automatischer Greifer-Umpositionierung (°) Maximalmaß kann je nach Plattengröße und Greiferpositionierung reduziert sein.

Gamybos metai: 2001, Sąlyga: labai geros būklės (naudotas), I am selling a Biesse line consisting of: COMIL Insider dowel - milling - grooving - dowel insertion - glue application - accessories insertion - line. Year of manufacture: 1999-2001. It is possible to sell the machines separately. Itodod Iv H Ropfx Af Ieb Vibration feeder and motorized conveyors included in the offer. For more photos and details, please send an inquiry.

Gamybos metai: 2004, Sąlyga: labai geros būklės (naudotas), I am selling a throughfeed drilling machine BIESSE TECHNO FDT, year of manufacture 2004. Working area: X: 215 - 32,000 mm Y: max. 672 mm (horizontal spindle 24 units, 32 mm pitch) Z: Workpiece height: 9 - 65 mm Min. X distance between vertical heads: 96 mm Itodpsi U Apmofx Af Iob Configuration: 4+4 motors from below 1 routing motor with pneumatic on/off stroke from below 1+1 side motors, 24 spindles / 32 mm pitch 0 motors from rear 4+4 motors from above 4 material pressure rollers from above Very good condition. Available immediately. Another BIESSE TECHNO FDT with different configuration available in a line. Price upon request.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2002, I am selling a CNC dowel drilling machine with dowel inserter: BIESSE COMIL INSIDER KT2, year of manufacture 2002. - 2 pcs. CNC drilling heads, top-mounted - 1 pc. grooving saw - 2 pcs. SARG vibration dowel inserting units - 1 pc. vacuum pump Iodpfot N Rkvex Af Istb This is part of a Biesse line consisting of: COMIL Insider dowel inserting – milling – grooving – dowel inserting – glue inserting – accessory inserting – line Year of manufacture 1999-2001. It is possible to sell the machines separately. Vibration dispensers and motorized conveyors included in the offer. Please send your inquiry for more photos and details.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1999, I am selling a CNC dowel drilling machine with dowel insertion unit BIESSE COMIL INSIDER KT2, year of manufacture 1999. Isdpfx Afot N Hmms Ietb - 2 pcs. CNC drilling heads from above - 1 pc. groove saw - 3 pcs. "3Master Vibratori" vibration dowel insertion units This is part of a Biesse line consisting of: COMIL Insider dowel - milling - grooving - dowel insertion - glue application - accessory insertion - line Year of manufacture: 1999–2001. It is possible to sell the machines separately. Vibration feeders and motorised conveyors are included in the deal. For more photos and details, please send your enquiry.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2002, I am selling a CNC dowel boring machine with dowel inserting unit, BIESSE COMIL INSIDER KTC, year of manufacture 2002. - 2 pcs. CNC boring heads from the side - 1 pc. glue injection head - 3 pcs. 3Master Vibratori vibratory dowel insertion units Itjdpfxet N Rixe Af Isb The machine is part of a Biesse production line consisting of: COMIL Insider dowel boring – milling – grooving – dowel inserting – glue inserting – accessory inserting – line Years of manufacture 1999-2001. It is possible to sell the machines separately. Vibratory dispensers and motorized conveyors are included in the deal. For more photos and details, please send an inquiry.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2001, I am selling a CNC accessory insertion machine with gluing injection, BIESSE COMIL INSIDER IT2G, year of manufacture 2001. Included: - 2 pcs. CNC drawer slide insertion from above Iodpfx Afot N N Aqo Ietb - 6 pcs. glue injection heads - 1 pc. vibrating accessory insertion unit Part of a Biesse production line comprising: COMIL Insider dowel - milling - grooving - dowel insertion - glue injection - accessory insertion - line Year of manufacture: 1999-2001 Machines can be sold separately. Vibration feeder and motorized conveyor are included in the offer. For more photos and details, please send an inquiry.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, Naudojamas ilgio diapazonas (X ašis) panelėms min./maks.: 200 – 3200 mm Naudojamas plotis (Y ašis) panelėms min./maks.: 35 – 900 mm Naudojamas storis (Z ašis) panelėms min./maks.: 8 – 60 mm Isdpfx Asx Rcy Isf Ietb 1 vertikalus elektroverpstas (4,5 kW) ISO 30 1 apvalus pjūklas (Ø 120 mm) 10 nepriklausomų vertikalių gręžimo velenų 6 nepriklausomi horizontalūs gręžimo velenai (4 X ašyje ir 2 Y ašyje) Lazerinio nuskaitymo sistema Skaitmeninis valdymas (bSolid programinė įranga)