HSK AGREGATAS

BIESSE

Būklė: nepatikrintas (naudotas), Gamybos metai: 2009, Funkcionalumas: nepatikrintas, ašių skaičius: 4, stalo ilgis: 4 300 mm, stalo plotis: 2 200 mm, ašies skaičius: 40, įrankio skersmuo: 120 mm, TECHNICAL DETAILS Number of spindles for vertical drilling: 30 Number of spindles for horizontal drilling in X direction: 6 Number of spindles for horizontal drilling in Y direction: 4 Total number of vertical + horizontal spindles: 40 Number of controlled axes: 4 Maximum tool diameter: 120 mm Table dimensions: 4,300 x 2,200 mm Number of slots in tool magazine 1: 22 Number of slots in tool magazine 2: 8 Ledpfxeyq Ez Tj Agfohd MACHINE DETAILS Milling motor power: 12 kW Total installed power: 42 kW Control software: BIESSEWORKS EQUIPMENT Automatic panel loading system Automatic panel stacking system Lifting table Transport system Vacuum pump Note: The safety fences at the rear and at the loading table are missing and will only be supplied subject to availability. The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7087

Būklė: nepatikrintas (naudotas), Gamybos metai: 2008, Funkcionalumas: nepatikrintas, ruošinio aukštis (maks.): 90 mm, ruošinio plotis (maks.): 3 200 mm, ruošinio ilgis (maks.): 3 200 mm, briaunos storis (maks.): 3 mm, The machine has the following configuration: Number of panel sizing/milling units, left side: 5 Milling unit (AS10) Double finishing cutters, top and bottom 2 pre-milling units Milling unit Number of edge processing units: 10 End trimming Top and bottom rough trimming Fine trimming for bevel and radius Corner rounding (AR34, 4 motors) Edge milling (FB40, 1 motor) Edge scraping Belt sanding (1 motor) Glue scraping Polishing (2 motors) Spraying device TECHNICAL DETAILS Minimum panel height: 10 mm Maximum panel height: 90 mm Maximum panel length: 3,200 mm Maximum panel width: 3,200 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm EQUIPMENT Conveyor chain with pushers Pressure system with rubber band Panel guide rails with NC positioning Edge roll magazine with 6 positions Hot melt unit for PUR adhesive NORDSON Roller set for edge pressing 4 pressure rollers with NC positioning Spraying device mounted on upper cabinets The machine is sold and delivered in its current factual and legal condition ("as seen and approved") on the basis of photo documentation and technical/commercial documents of descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7685 Lsdpfx Ageyq Avhsfjhd

Būklė: nepatikrintas (naudotas), Gamybos metai: 2011, Funkcionalumas: nepatikrintas, X ašies eiga: 6 200 mm, Y ašies eiga: 1 935 mm, ruošinio aukštis (maks.): 250 mm, ašių skaičius: 4, ašies skaičius: 40, TECHNICAL DETAILS Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Panel thickness for edge banding unit: 14 - 60 mm Maximum panel thickness: 350 mm Lsdpfeyqzrnox Agfjhd Number of vertical drilling spindles: 28 Number of horizontal drilling spindles in X direction: 4 Number of horizontal drilling spindles in Y direction: 8 Total number of drilling spindles: 40 Total number of tool change positions: 22 Number of suction beam traverses: 10 Milling unit Number of axes: 4 Motor power: 10.5 kW Automatic tool changer Edgebanding unit Gluing unit Tool magazine Grooving unit Number of slots in tool magazine: 22 MACHINE DETAILS Main spindle power: 10.5 kW Total power: 31 kW EQUIPMENT Vacuum pump Safety net Chip conveyor The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documentation of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and operation of the machine at the destination. External reference: 8011

Būklė: nepatikrintas (naudotas), Funkcionalumas: nepatikrintas, X ašies eiga: 3 200 mm, Y ašies eiga: 1 300 mm, ašies skaičius: 21, greitas poslinkis X ašimi: 80 m/min, greitas poslinkis Y ašis: 60 m/min, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 3,200 mm Travel range Y-axis: 1,300 mm Traverse speed X-axis: 80 m/min Traverse speed Y-axis: 60 m/min Traverse speed Z-axis: 25 m/min Number of suction traverse beams: 6 Spindles Number of vertical drilling spindles: 15 Number of horizontal drilling spindles in X-direction: 4 Number of horizontal drilling spindles in Y-direction: 2 Lhedsytr Ryepfx Agfjd Total number of spindles: 21 Milling unit Number of axes: 3 Max. rotational speed: 24,000 rpm Motor power: 9 kW Tool turret Number of positions: 10 MACHINE DETAILS Total power consumption: 26 kW EQUIPMENT Vacuum pump WINDOWS control system WRT machine programming software Note: Cones and milling tools are not included in the scope of delivery. Safety fences will be supplied subject to availability (right side is missing). The machine is sold and delivered in its actual and legal condition ("as seen and approved"), based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 8174

Būklė: naudotas, mašinos/transporto priemonės numeris: 007871, Max. panel width: 1200 mm Max. panel length: 3200 mm Max. panel stack height above floor: 1600 mm Lhedpfewimzmjx Agfsd Movement system: with suction elements

Būklė: naudotas, mašinos/transporto priemonės numeris: 008359, Darbo sritis X ašyje: 2500 mm Lhedpsx Swcaefx Agfsd Darbo sritis Y ašyje: 1320 mm Darbinis paviršius: su vakuuminėmis konsolėmis Pagrindinio verpstės galia: 13 kW Valdomų ašių skaičius: 4 ašys Gręžimo verpstės skaičius: 16 Įrankių vietų skaičius: 22

Būklė: naudotas, Gamybos metai: 2014, Tuščias svoris: 4 000 kg Kaina: pagal užklausimą - Mašina prieinama nuo: 2026-01-26 - Pagaminimo metai: 2014 - Dokumentacija prieinama: Ne - CE ženklinimas yra: Taip - CE sertifikatas prieinamas: Ne - Serijos numeris: 89867 - Frezavimo verpstės kiekis [vnt.]: 1 - Frezavimo stalo tipas: plokščias stalas - Gręžimo įrankis yra: Taip - Pjovimo agregatas yra: Taip - Įrankių keitimo pozicijos [vnt.]: 12 - Stalo ilgis [mm]: 3600 - Stalo plotis [mm]: 1800 - Transportavimo svoris [kg]: 4000kg - Transportavimo paketų kiekis [vnt.]: 1 Lsdpexr Evljfx Agfohd Finansinė informacija PVM: Nurodyta kaina be PVM PVM / Skirtumo apmokestinimas: PVM atskaitomas įmonėms Pristatymas ir priėmimas mainais galimi bet kuriuo metu visoms pramonės sritims Glenn Smeets

Būklė: labai geros būklės (naudotas), Double-sided FORMATTING AND EDGE BANDING MACHINE (1st and/or 2nd machine in one line) Roll material (edge) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 240 - 2700 Control system/software: SINITRA Feed speed (adjustable) m/min: 10 - 40 Cam spacing (mm): 500 FORMATTING UNITS (per side): Protective cutter (pre-milling) AS 10 (1 x approx. 5.2 kW) 2 x hogging units DT 10 (2 x approx. 5.8 kW) Spray system (for liquid anti-adhesive) EDGE BANDING SECTION (per side): Gluing unit (Hot Melt glue + pre-melter) SP30 (High Melt + Edge Control EC40) Edge pressure section (CNC-controlled). Edge magazine for rolls (6 positions) End trimming unit IT 90-S (2 x approx. 0.3 kW) 28 m/min (0° - 25°) Pre-milling unit RS 10 (2 x 0.75 kW) Multi-profile milling unit (CNC controlled) RF 30 (2 x 0.37 kW) 0°-25° Multi-functional unit (radius milling and contour processing) AR 30 (2 x 0.35 kW) Left: 2 x universal milling units for grooving/rebating and profiling FB 32 (2 x 5 kW) 0°- 90° Right: Universal milling unit for grooving/rebating and profiling FB 30 (1 x 5 kW) 0°- 90° Profile scraping unit RB 10 Ledpfx Agjywk Elofehd Flat scraping unit RC 10 - spray units (for polishing fluid) Finishing unit (flat scraper + smoothing unit) SZ 30 (2 x 0.37 kW) Hot air blower - edge trimmer PH 10 OPTION: D.O.M. stacker with support column and mobile jib (with vacuum suction pads) for unloading and stacking of edge-processed panels.

Būklė: naudotas, mašinos/transporto priemonės numeris: 007913, Uždedamos briaunos tipas: plona briauna, stora briauna Klijavimo sistema: EVA, karštas oras Sujungimo frezavimas: taip Daugiafunkcis agregatas: taip Lhjdpfx Ajwkf Dvogfod Didžiausias plokštės storis: 60 mm Darbo agregatai: 7 vnt.

Būklė: naudotas, mašinos/transporto priemonės numeris: 008370, Darbo sritis X ašis: 5055 mm Darbo sritis Y ašis: 1930 mm Darbo stalas: Su vakuuminėmis konsolėmis Pagrindinis velenas galia: 19 kW Ledpfxex A Tk Ss Agfjhd Valdomų ašių skaičius: 5 ašių Maksimalus briaunos aukštis: 60 mm Gręžimo veržliarakčių skaičius: 28 Įrankių vietų skaičius: 31