Akių Lange pirkti naudotą (2 739)

Būklė: geras (naudotas), Turning tool with indexable inserts, clamping holder, tool bit, indexable insert holder, turning blank, indexable turning tool steel, internal diameter boring bar, turning tool holder, boring bar Hodpfxjt Acyis Aftjfh - Turning tool: Boring bar, internal diameter boring holder with indexable insert - Type: Length 520 mm - Ref.: 701-12-201119 - Dimensions: 520/40/33 mm - Weight: 4.3 kg

Būklė: geras (naudotas), Šakinio krautuvo kaušas, hidraulinis šakinio krautuvo kaušas, lengvosios medžiagos kaušas, verstuvas, konteinerių verstuvas, krautuvų šakės, šakinio krautuvo šakės, šakių žnyplės -Šakinio krautuvo šakės: 2 vnt./1 pora -Ilgis: 900 mm -Dėmesio: prašome atkreipti dėmesį į būklę nuotraukose Hfedpfx Ajtvb D Ujftsh -Skerspjūvis: 100 x 40 mm -Tvirtinimas: 400 mm (žr. schemą nuotraukose) -Transportavimo matmenys: 1020/565/H100 mm -Svoris: 98 kg

Gamybos metai: 2010, būklė: labai geros būklės (naudotas), Parduodu langų komplektus, tinkamus CNC langų gamybos centrui: VYDONA MEDIS EU78-92, VYDONA medžio-aliuminio 92 mm, 50 mm skylė. Viskas pilnai komplektuota. Labai gera būklė. Galima įsigyti vienu komplektu arba atskirai. Hedpfx Afjy D E S Hjtsfh

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, LINIJOS YPATYBĖS 4 galvų suvirinimo aparatas FUSION 4H Hfjdpfx Afey S E E Netsh Rėmų nukrovimo įrenginys Pirmasis frezavimo modulis Q-MATIC 1 Nuoseklus ryšys tarp suvirinimo ir valymo įrenginių Sukamasis stalas Elektroninis valiklis TRIMMER 4A Ištraukimo stalas Antrasis frezavimo modulis Q-MATIC 2 Linijos priežiūros nešiojamas kompiuteris Nupjovimo įrenginys Automatinio rėmų iškrovimo įrenginys

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2005, 2005 m. pagamintas diskinis metalo pjūklas. Šio "Elumatec AKS 134" pjūklo skersmuo vertikaliai yra 550 mm, horizontaliai - 500 mm, didžiausias profilio aukštis - 250 mm, o didžiausia pastūma - 830 mm. Jei norite gauti aukštos kokybės pjovimo galimybes, apsvarstykite mūsų parduodamas "Elumatec AKS 134" stakles. Susisiekite su mumis dėl išsamesnės informacijos. Hfodey H Ecdepfx Aftsh • Pjūklo skersmuo (vertikalus): (skersmuo (550 mm) • Pjūklo skersmuo (horizontaliai): Dydis (skersmuo): 500 mm • Didžiausias profilio aukštis: 250 mm • Didžiausias pastūmos greitis: Didžiausias galimas profilis: 830 mm

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, rida: 160 000 km, pirmoji registracija: 06/2016, kuro tipas: dyzelinas, bendras svoris: 2 743 kg, kuras: dyzelinas, spalva: balta, emisijos klasė: Euro 5, sėdimų vietų skaičius: 6, Gamybos metai: 2016, Įranga: ABS, oro kondicionavimas, oro pagalvė, priešrūkiniai žibintai, stumdomos durys,

Būklė: geras (naudotas), Šakinio krautuvo kaušas, hidraulinis šakinio krautuvo kaušas, lengvų krovinių kaušas, verčiamas kaušas, konteinerių apvertimo įrenginys, šakinio krautuvo šakės, šakių poros, šakių dantys -Šakinio krautuvo šakės: 2 vnt./1 pora -Ilgis: 1600 mm -Skerspjūvis: 100 x 40 mm -Tvirtinimas: 400 mm (žr. schemą nuotraukose) -Transporto matmenys: 1750/590/A110 mm -Svoris: 118 kg Hfjdpfx Afjyzxalotoh

Būklė: geras (naudotas), Kardaninis velenas, šarnyrinis velenas, kryžminis šarnyras, flanšinis kryžminis šarnyras, pavaros velenas, kardaninis šarnyrinis velenas Hjdpfx Aoyzfzvsftsfh - Kardaninis velenas: su kryžminiu šarnyru - Tipas: ilgis 250 mm - Flanšo Ø 75 mm - Tvirtinimo skylės (ratlankio skersmuo): Ø 62 x 6 mm - Kiekis: 2 kardaniniai velenai - Kaina: už vienetą - Matmenys: Ø 75 x 250 mm - Svoris: 2,3 kg/vnt.

Būklė: geras (naudotas), Kardaninis velenas, kardaninis velenas, kryžminis šarnyras, flanšinis kryžminis šarnyras, pavaros velenas, kardano šarnyrinis velenas -Kardaninis velenas: su kryžminiu šarnyru -Tipas: ilgis 240 mm -Flanšas: Ø 75 mm -Tvirtinimo skylės: Ø 62 x 6 mm -Išmatavimai: 240/75/H75 mm -Svoris: 2,2 kg Hsdpfx Aeyzfxhsftjfh

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 13688, Gamybos metai: 2012, tuščias svoris: 4 990 kg, Visiškai automatinė horizontali gamybos linija IGU ir atstumų rėmų gamybai! Gamybos pajėgumas – 1200 vnt. per pamainą! TECHNINĖ INFORMACIJA Gamybos našumas: 150 vnt./val. ĮRENGINIO INFORMACIJA Hsdpfx Asxdibpoftefh Elektros duomenys Įtampa: 480 V AC Dažnis: 50/60 Hz Fazės: 3 Didžiausia variklio srovė: 2 A Trumpųjų jungimų srovė: 5 000 A Galia: 142 kVA Įrenginio svoris: 4 990 kg KOMPLEKTACIJA GED Intercept Ultra-/plonų rėmų formavimo mašina i-3 – CE versija Termoizoliacinės kraštinės tarpiklio gamybos sistema Gaminama Intercept ULTRA nerūdijančio plieno, ThinPlate arba BlackLine Pastaba: Įrenginys bus prieinamas nuo 2025-12-02!

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 13688, Gamybos metai: 2012, tuščias svoris: 4 990 kg, Pilnai automatizuota, horizontali IGU ir tarpiklių gamybos linija! Gamybos pajėgumas – 1200 vnt. per pamainą! Hfsdpfx Afex Trlrsteh TECHNINĖ INFORMACIJA Gamybos pajėgumas: 150 vnt./val. ĮRANGOS INFORMACIJA Elektros duomenys Įtampa: 480 VAC Dažnis: 50/60 Hz Fazės: 3 Didžiausia variklio galia: 2 A Trumpalaikės srovės stipris: 5 000 A Galia: 142 kVA Įrenginio svoris: 4 990 kg KOMPLEKTACIJA GED Intercept Ultra-/plonų rėmų gamybos įrenginys i-3 – CE versija Warm-Edge tarpiklio gamybos sistema Intercept ULTRA nerūdijančio plieno, ThinPlate arba BlackLine gamyba

Būklė: geras (naudotas), lango rankenų gręžimo staklės Hfodpfx Afoy Edmloteh

Būklė: naudotas, Siūlome šį naudotą ARI Ds-73+1 Ari ds-73 ks-12. Söderhamn / Ake, pagaminimo metai nežinomi. Jei turite klausimų ar reikia daugiau informacijos, susisiekite su mumis žinute arba paskambinkite. Hfjdpfx Afsy Er T Hstsh

Gamybos metai: 2006, būklė: naudotas, Vertikalaus pjūklo disko skersmuo: 550 mm Horizontalaus pjūklo disko skersmuo: 500 mm Maks. profilio aukštis: 250 mm Maks. padavimo eiga: 830 mm Skaitmeniniai kampų indikatoriai medžiagos atramai ir abiejų pjūklo agregatų pasvirimui Hfjdpeyybr Uefx Aftjh Pneumatiniai medžiagos spaustuvai Minimalios dozės purškimo įrenginys Hidropneumatinis pjūklo disko padavimas su dviejų rankų valdymu Svoris: 1 000 kg

Būklė: geras (naudotas), Hang 162-55 Nietmaschine zur Herstellung von Küchenmessern Hersteller: Hang, Deutschland Die Maschine dient zum Verpressen von Nieten in Messerhaltern. Geeignet für mittlere und große Serien Massive geschweißte Konstruktion Zwei motorisierte Nietzuführungen mit drehenden Sortierbehältern Stiftniet-Werkzeug und Transportschieber für Hohlnieten Druckausgleich Verstärkter, flacher Arm mit Höhenverstellung Hfjdpfx Afeu Ul Tnetjh Gewicht: 570 kg Stromversorgung: 380V Der Arbeitszyklus wird über ein Fußpedal ausgelöst.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm, with foot section, usable depth 1,200 mm Hsdpfx Aeh R Taqeftofh - 27 cantilever arms with a usable depth of 1,200 mm, equipped with deflectors - 9 roof supports with a projection of 1,500 mm, pre-drilled for customer-supplied roof construction (*Excludes timber purlins and trapezoidal sheets for roof construction) - Includes longitudinal and diagonal bracing for 1,500 mm upright spacing - Incl. fastening materials (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts re-orderable and extension possible at any time) - (*Available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles - All components’ surfaces are hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (max. snow load 1.85 kN/m², wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (max. snow load 1.85 kN/m², wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, 1,200 mm deep, with deflectors = 4 storage levels above each other - Including longitudinal and diagonal bracing with 1,500 mm axle spacing - Rack length: 12,100 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load labels C4 in accordance with DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight service with advance delivery notification. Material is packaged for ease of unloading. The foundation must be concrete, level, suitable for doweling, and capable of bearing all imposed loads. Floor conditions and load-bearing capacity as well as any necessary official permits are to be checked and ensured by the customer. The uprights must be anchored to the floor by the customer; wall anchoring is neither required nor recommended. According to trade association guidelines, uprights should have a minimum 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Cantilever racking in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 racking uprights, height 4,200 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth - Longitudinal and diagonal bracing for 1,300 mm upright spacing (4,000 mm rack length) - Fastening material (bolts, nuts, and washers) (*Delivery or collection in approx. 1–2 weeks) (*No paint damage!) (*No damaged components!) (*Spare parts and expansions available on request at any time) (*Offer also available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed Description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Height adjustable cantilever arms in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 740 kg - Including longitudinal and diagonal bracing for 1,300 mm upright distance - Rack length = 4,000 mm - Includes fastening material (without floor anchors) Hjdpfx Aemhhypeftofh - Supplied with assembly instructions and load labels C4 according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with pre-delivery notification. The material is packed for efficient and easy unloading. Delivery can take place approx. 1–2 weeks after receipt of order. When installing outdoors, the load capacity must be reduced according to wind and snow loads. The substrate must be concrete, level, suitable for anchors, and capable of bearing the imposed loads. The customer is responsible for inspecting and ensuring the ground condition, load-bearing capacity, and any necessary official permits. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to trade association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Racking Used: Bolted System, Hot-Dip Galvanised Version Scope of delivery: - 4 upright frames, height 3,500 mm with base foot section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including horizontal and diagonal braces for 1,300 mm frame spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available for larger quantities: approx. 40 uprights in stock) Hedsmhh Dhjpfx Aftofh Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Includes horizontal and diagonal bracing for 1,300 mm frame spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Telephone expert advice - Made in Germany - Short delivery times - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. Materials are sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowel fixings, and capable of bearing the resulting loads. Customers are responsible for checking and ensuring ground conditions, load capacity, and any required official permits. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is advised that uprights have at least a 500 mm overhang of the top storage level above the upright’s top edge.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section, 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available at any time and system can be expanded - Larger quantities available: approx. 40 uprights in stock Detailed description: - Robust steel construction made of IPE profiles (bolted system) Hsdpsmhh Dzefx Aftofh - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Professional telephone support - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance delivery notification. The material is packed in a way that allows easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be made of concrete, level and dowel-able, and able to support the applied loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have at least 500 mm of overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack used: Bolt system in hot-dip galvanized version Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and extensions can be reordered at any time) - (Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE sections (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with pre-delivery notification. The material is packed for easy unloading. For outdoor installation, the load capacities must be reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowelling, and capable of absorbing the acting loads. Floor condition and load-bearing capacity, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. Hfjdpfx Afefdkb Tstsh According to trade association recommendations, the rack uprights should project at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard Hfjdpfsd Tbbdex Afteh - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts reorder and extension possible at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load identification plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with advance delivery notification. The material is sensibly packed to ensure easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, suitable for dowels, and able to support the applied loads. The ground condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to professional association guidelines, rack uprights should have at least 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: bolted system, hot-dip galvanized version Scope of delivery: - 4 racking uprights, height 3,000 mm, with base section, 1,200 mm useful depth - 12 cantilever arms, standard, 1,200 mm useful depth - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts re-orderable and expansion possible at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface: hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm useful depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length: 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packed in a practical way to enable easy unloading. When installed outdoors, the stated load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, and suitable for anchor bolts, and must be able to bear the applied loads. The floor structure, load-bearing capacity, and any necessary official approvals must be checked and provided by the customer. Hfsdpfx Afjmhhx Iotjh The racking uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to German statutory accident insurance (BG) guidelines, it is recommended that the racking uprights have at least 500 mm of clearance above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack, used: bolted system, hot-dip galvanized version Scope of delivery: Hsdpfemhhyaox Aftjfh - 4 rack uprights, height 2,600 mm, with base sections, 1,000 mm useful depth - 12 cantilever arms, each with 1,000 mm useful depth, standard version - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts available and extensions possible at any time) - (*Larger quantities available: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms each with 1,000 mm useful depth - Cantilever arms height-adjustable in 100 mm increments - 3 boltable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Total rack length: 4,000 mm - Fastening material included (without floor anchors) - Comes with assembly instructions and C4 load capacity labels according to DIN standards - Expert technical support by phone - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packed in a practical manner to enable easy unloading. If installed outdoors, load capacities are reduced due to wind and snow loads. The installation surface must be concrete, level, suitable for anchoring, and able to withstand the imposed loads. The client is responsible for verifying and ensuring ground condition, load-bearing capacity, and any necessary official permits. Rack uprights must be anchored to the floor on-site; wall anchoring is neither required nor recommended. According to trade association guidelines, the uprights of the rack should have a minimum overhang of 500 mm above the highest storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 3,000 mm with base section, usable depth 1,200 mm Hodpfx Aemhh Anoftsfh 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm bay spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively produced in Germany. We provide reliable shipping with advance notice before delivery. The material is well packed to allow for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The flooring must be concrete, level, and suitable for dowels, and able to absorb the acting loads. The condition and load-bearing capacity of the floor as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is recommended that the uprights provide at least 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack, used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms, 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright distance 1,300 mm) Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and system can be expanded at any time) - (Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Assembly instructions and capacity signs C4 according to DIN standard included - Expert telephone consultation - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with pre-delivery notification. Materials are sensibly packed for easy unloading on site. When installed outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, level, suitable for anchor fixing, and capable of bearing the loads. The floor condition and load-bearing capacity as well as any required permits must be checked and ensured by the customer. The uprights must be anchored into the floor on site; wall anchoring is neither necessary nor recommended. Hfodpsd Tqalsfx Afteh According to professional association guidelines, it is recommended that uprights extend at least 500 mm above the top storage level.