4 Pusės Obliavimo pirkti naudotą (31 044)

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack used: Bolt system in hot-dip galvanized version Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and extensions can be reordered at any time) - (Offer available for larger quantities: approx. 90 uprights in stock) Ihodsfdkb Tjpfx Af Ijt Detailed description: - Robust steel construction made from IPE sections (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with pre-delivery notification. The material is packed for easy unloading. For outdoor installation, the load capacities must be reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowelling, and capable of absorbing the acting loads. Floor condition and load-bearing capacity, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to trade association recommendations, the rack uprights should project at least 500 mm above the top storage level.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, WEISHAUPT WM-G10/A-4; Su dujų trasa - Galia: 110-1250 kW - Pagaminimo metai: 2011 - Vykdymas: ZM Iodpswgym Dofx Af Isht

Sąlyga: naujas, Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, Kaina taikoma visam komplektui kartu. Puikiai tinka pradėti šilkografijos veiklą, menininkų studijai, menininkams. Rinkinį sudaro: 1. ŠILKOGRAFIJOS KARUSELĖ, X 4 STALAI, PILNAI REGULIUOJAMA 2. DŽIOVINTUVAS: 3 FAZIŲ MAITINIMAS 3. AUTOMATINIS FLASH DŽIOVINTUVAS: 3 FAZIŲ MAITINIMAS Ihjdpfexwnw Aox Af Iet VISKAS NAUJA, IŠPAKUOTA IŠ DĖŽIŲ.

Sąlyga: labai geros būklės (naudotas), CNC rotary table, Nikken 5AX-230, 4th and 5th axis for Mazak etc. Previously mounted on a VTC 300, now for sale due to replacement with a new 5-axis machine. Isdop U Umkepfx Af Ieht

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: EAN0729389556525, bendras ilgis: 34 000 mm, lentynos aukštis: 3 500 mm, atrama ilgis: 2 700 mm, lentyna ilgis: 8 500 mm, rėmo aukštis: 3 500 mm, apkrova vienai santvarų porai (maks.): 3 000 kg, rėmo plotis: 1 100 mm, lentynų eilučių skaičius: 4, padėklų vietos: 108 euro padėklai, 4 rows of pallet racks (4 x M35112711-2) Each 8.5 m long, 3.5 m high, 1.1 m deep Each with 3 bays, 2.7 m wide Each with 2 beam levels, bay load capacity 3,000 kg - 16 frames (RM3511 - RAL5019) - 32 base plates, laying material, fastening material - 64 floor anchors (ZZBA1210) - 48 individual beams (T27114 - RAL2008) - 4 load capacity signs (BSMcP) Ihjdpfx Afov Ukz Aj Ijt Frames bolted, not pre-assembled Freight / Delivery: - Maximum 20 working days after receipt of payment - Delivered free to construction site / assembly location - Unloading from the truck to be carried out by the buyer using own lifting equipment - Delivery throughout the entire territory of the Federal Republic of Germany (except islands!). - Deliveries to EU countries according to individual agreement.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1995,

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,500 mm, with foot section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Incl. longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and extensions possible at any time - Offer available in larger quantities: approx. 40 uprights in stock Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with prior delivery notification. Material is sensibly packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be made of concrete, level, and suitable for anchors, and capable of bearing the relevant loads. The customer is responsible for checking and ensuring the substrate conditions and load-bearing capacity as well as any potentially required official permits. Ihjdpfjfdkb Usx Af Iot Uprights must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the uprights feature at least a 500 mm projection above the top storage level.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2020, 1. WEISHAUPT WM-G10/4-A (with gas train) - Output: 100-1100 kW - Version: ZM-LN - Year of manufacture: 2020 2. WEISHAUPT WM-G10/3-A (with gas train) - Output: 100-1000 kW - Version: ZM Ijdpfx Afowgyrto Isht - Year of manufacture: 2013

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, pildymo angos plotis: 1 250 mm, pildymo angos ilgis: 1 000 mm, bendras svoris: 1 300 kg, Technical Data: Hopper opening: Length x Width 1250 x 1000 mm Length x Width 1250 x 1000 mm Iedpjvuphuefx Af Isht Cutting unit opening: Length x Width 562 x 462 mm Number of shafts: 4 of which: Cutting shafts 2 Number of cutting discs: 23 Shaft speed: 25 rpm.

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, 4 spausdinimo agregatai 12" Isdpfxjwhqnzo Af Ijht vandens aušinimo įrenginys 2 perforavimo agregatai Gera techninė būklė Šiuo metu dirba gamyboje

Sąlyga: paruoštas naudoti (naudotas), valdiklio modelis: Haas, tuščias svoris: 12 000 kg, bendras ilgis: 5 950 mm, bendras plotis: 3 048 mm, bendras aukštis: 2 200 mm, sūpynės skersmuo virš skersinio vežimo: 2 000 mm, CNC holle-as slant bed 'oil country' draaibank Zwaai over het bed: 1350 mm Ihjdpfx Aewu Ipiof Ijt Zwaai over de dwarssupport: 400 mm Diameter van de spilboring: 270 mm (!!) Spilvermogen: 55 pk Aantal toerentallen: 1 > 500 tpm Grote doorlaat toolroom draaibank Draaibank met dubbele klauwplaat Spanenafvoerband

Sąlyga: naujas, VERKAUF AB LAGER Tragfähigkeit: 240 kg Max. Plattformhöhe: 4 m Anzahl der Bediener: 1 Plattformabmessungen: 1,15 x 0,6 m Gesamtlänge: 1,32 m Gesamtbreite: 0,76 m Gesamthöhe: 1,92 m Plattformausschub: 0,55 m Ausschubkapazität: 100 kg Hub-/Senkzeit: 34/25 sek Wendekreis: 0 Iodpfxjulah Ns Af Ieht Maximale Neigung: 1,5°/2° Antriebsräder: 230 x 80 mm Steigfähigkeit: 25 % Radstand: 1,0 m Fahrgeschwindigkeit (eingefahren): 4 km/h Fahrgeschwindigkeit (angehoben): 0,5 km/h Batterie: 2 x 12 V / 100 Ah Hubmotor: 24 V / 1,3 kW Fahrmotoren: 24 V / 0,5 kW Ladegerät: 24 V / 15 A Eigengewicht: 660 kg Proportionalsteuerung Automatischer Schlaglochschutz Fahrbar in voller Höhe Nicht-markierende Bereifung Automatisches Bremssystem Notablasssystem Not-Aus-Taster Zylinderhalteventil Integriertes Diagnosesystem

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Used cantilever racking: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm with 1,200 mm foot sections - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Includes mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot sections and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg Ihjdpfx Afefdkbhe Iot - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - Supplied with assembly instructions and load labels C4 as per DIN standard - Professional phone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notice before delivery. The material is sensibly packaged to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow load. The subfloor must be concrete, level, and suitable for dowelling as well as able to bear the applied loads. The floor condition, bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should project at least 500 mm above the top storage level.

Sąlyga: naujas, Gamybos metai: 2025, Tout inox Mélangeur Tumbler – livraison rapide d’une machine Fabrication neuve sur commande Cuve en acier inoxydable de haute qualité, inox 316 Ijdpfoif Upfox Af Ijht Vitesse de rotation variable de 0 à 24 tr/min Déchargement par basculement électrique Capacité de 50 kg à 90 kg selon le type de produit 2 modèles disponibles

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, 4 Stk. Edelstahltrichter 3 Stk. Trichter Abmessungen: 700 mm x 1200 mm x 1220 mm (Höhe) 1 Stk. Trichter mit Abmessungen: 1200 mm x 1200 mm x 1220 mm (Höhe) Mit Hand-Absperrschieber Gasdruckdämpfer für Deckelöffnung Innenliegendes Edelstahl-Siebsieb Mobil auf arretierbaren Lenkrollen Iodpourf Twjfx Af Ieht Teilweise mit pneumatischer Vibrationsvorrichtung Teilweise mit Füllstandsensor In exzellentem Zustand

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts reorder and extension possible at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load identification plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with advance delivery notification. The material is sensibly packed to ensure easy unloading. Ihodpfxed Tbbdj Af Ist When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, suitable for dowels, and able to support the applied loads. The ground condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to professional association guidelines, rack uprights should have at least 500 mm overhang above the top storage level.

Sąlyga: naudotas, Nordson ProBlue 4 Heißleimpumpe Modell ProBlue 4 Ihedpfx Afjwq Sv Eo Iet Komplett mit 2 beheizten Schläuchen und Auftragsdüsen, Luftmagnetventil & Modulen Behälter für Klebstoffauftrag / Aufbewahrungsbehälter Montiert auf einem Edelstahlrahmen

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2024, Cantilever rack used: Bolted system in hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm with foot sections 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized Ihodpfx Afjguk Dkj Iot - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Total racking length = 4,000 mm - Including fastening material (without floor anchors) - Comes with assembly instructions and C4 load labels according to DIN standard - Expert consultation by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notice prior to delivery. Material is well-packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for doweling, and capable of bearing the loads involved. The client is responsible for ensuring the condition and load-bearing capacity of the floor as well as obtaining any necessary official permits. The rack uprights must be anchored in the floor on site—a wall anchoring is neither required nor recommended. According to professional association recommendations, the rack uprights should have a minimum 500 mm projection above the top storage level.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Rack Used: Bolt-together System in Hot-dip Galvanized Version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section 1,000 mm - 12 cantilever arms with 1,000 mm effective depth, standard Ihodpfx Aeguk Dvof Ijt - Including longitudinal and diagonal bracing for 1,300 mm bay width - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm bay width - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification prior to delivery. The material is sensibly packed to allow for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, and suitable for doweling, and must be able to absorb the acting loads. Floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to the employers’ liability insurance association, it is recommended that the uprights feature a minimum 500 mm overhang above the top storage level.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Cantilever rack, painted version (RAL 7016 Anthracite): Scope of delivery: - 4 upright frames, height 2.56 m, with base section, 1.0 m usable depth (1.2 m total depth) - 12 cantilever arms, 1.0 m usable depth - Longitudinal and diagonal bracing for 4 m rack length (spacing 1.3 m) - Fastening material (bolts, nuts, and washers) (*No paint damage!) Net price for pickup: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolt-in system) - Surface painted according to RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per frame: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per frame as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Made in Germany - Short delivery times Iedjguk A Hjpfx Af Ijht - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight shipping with advance notification before delivery. The material is packed efficiently to enable easy unloading. The subfloor must be made of concrete, level and suitable for anchoring, and capable of bearing the applied loads. The customer is responsible for checking and ensuring the ground conditions, load-bearing capacity, and obtaining any necessary official permits. Rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to German professional association guidelines, it is recommended that the upright frames extend at least 500 mm above the top storage level.

Sąlyga: geras (naudotas), rida: 225 500 km, galia: 286 kW (388,85 AG), pirmoji registracija: 01/2008, kuro tipas: dyzelinas, padangos dydis: 385/65R22.5, ašių konfigūracija: 6x2, ratų bazė: 4 300 mm, kuras: dyzelinas, spalva: geltonas, vairuotojo kabina: dieninė kabina, pavaros tipas: pusiau automatinis, emisijos klasė: Euro 5, pakaba: plienas-oras, krovinio erdvės tūris: 16 m³, Gamybos metai: 2008, Įranga: AdBlue, kranas,

Sąlyga: geras (naudotas), Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, Parduodama: Emmegi TU/4 dviguba kampinė pjovimo staklės, pagaminta 1995 m. Patikimas ir paprastas dviejų galvų pjūklas aliuminio bei PVC profiliams pjauti. Idealiai tinka langų ir durų gamintojams bei bendrai profilių gamybai. Techninės specifikacijos: Dvigubos kampinės pjovimo staklės Disko skersmuo apie 350 mm (Ø300–400 mm) Pjovimo kampai: 90° ir 45° Pjovimo ilgis apie 3–4 m Pneumatiniai horizontalūs spaustuvai Variklio galia ~1,5–2,2 kW vienai galvai Veleno greitis apie 3000 aps./min. Svoris apie 500–600 kg 400 V / 6–8 bar Isdpfsxz R Npex Af Ieht Staklės darbinės būklės, paruoštos naudojimui. Prašome patikrinti tikslias technines staklių specifikacijas pas pardavėją.

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2017, keliamoji galia: 1 100 kg, šakių ilgis: 1 100 mm, Šakės Krovos pusiausvyros taškas: 540 ISO klasė: ISO klasė 2 = 1.000 - 2.500 kg Ijdex N U Smjpfx Af Ieht Būklė: Paruošta naudoti ir visiškai veikianti Techninė būklė: gera

Sąlyga: labai geros būklės (naudotas), Siūlome jums: Lehmann rotoFIX NC sukamasis stalas (4-asis ašis) EA-510.L-M1 RFX - Sukamasis stalas EA-510.L tipas, spaudimo momentas 800 Nm - Priešinis atraminis guolis GLA.TOP2-150 (spaudos momentas 2000 Nm) - Tvirtinimo rinkinys RFX.510-ASa-TOP su paruošimu sukimuisi (4 kanalai) - Aliumininė spaudimo skersinė RFX.510-SB600a (L=600 mm, B=215 mm) - Plieno bazinė plokštė RFX.510-GP600s-TOP - Elektros ir pneumatinis paruošimas - Programinės įrangos paruošimas sukimosi apdirbimui - Maks. apsukų dažnis: 80 aps./min - Ašies aukštis: 180 mm (su bazine plokšte) - Rekomenduojama montuoti dešinėje darbinio stalo pusėje - Skirta HEIDENHAIN valdymo sistemai Ihsdex U S E Ujpfx Af Iet Prekės būklė: Sukamasis stalas nuimtas nuo staklių, kurios dirbo tik 900 veleno valandų – todėl labai mažai naudotas ir puikios būklės. Techninių duomenų ir aprašymo pakeitimai bei klaidos galimi, o prekė gali būti parduota bet kuriuo metu!

Sąlyga: geras (naudotas), rida: 352 400 km, galia: 375 kW (509,86 AG), pirmoji registracija: 06/2017, kuro tipas: dyzelinas, padangos dydis: 385/65R22.5, ašių konfigūracija: 8x4, ratų bazė: 3 900 mm, kuras: dyzelinas, stabdžiai: retarderis, vairuotojo kabina: miegamoji kabina, pavaros tipas: pusiau automatinis, emisijos klasė: Euro 6, pakaba: plienas-oras, Gamybos metai: 2017, Įranga: AdBlue, centrinis užraktas, elektrinis langų reguliavimas, elektroninė stabilumo programa (ESP), kruizo kontrolė, oro kondicionavimas, priekabos jungtis, priešrūkiniai žibintai, retarderis, sėdynės šildytuvas,