Widos pirkti naudotą (1 974)

Būklė: naudotas, Gamybos metai: 2003, Overview This 5-gallon water bottling machine was built in 2003 using proven technology by the American manufacturer Steelhead. The machine has already been dismantled, stored, and can be viewed in person. Technical Details. Capacity: 600 bph Gisdpetw Ip Tefx Ac Dor

Būklė: labai geros būklės (naudotas), Volelinis kaktinis frezas, volelinis frezas, frezas - Būklė: kaip naujas - Skersmuo: 50 mm - Darbinis aukštis: 100 mm - Kietmetalio plokštelėmis - Tvirtinimas: SK50 Gedpfjb A Huvex Ac Dsir

Būklė: labai geros būklės (naudotas), • Modelis: WIDAX WULMIX-HE LINE M68 Ø160 R16 • Tvirtinimas: SK40 DV40A SE40 050 laikiklis • Skersmuo: Ø160 mm • Plokštelių lizdų skaičius: didelis – pilnas komplektas • Plokštelių tipas: 058 (daugkartinio naudojimo, keičiamos) • Būklė: labai gera, dantukai ir korpusas be pažeidimų, paruošta darbui • Preciziškai subalansuotas plieninis korpusas • Gamintojas: WIDAX – pagaminta Vokietijoje • Puikiai tinka CNC frezavimo staklėms ir apdirbimo centrams su SK40 įtvirtinimo velenais Gsdpfexmu A Djx Ac Djir

Būklė: naudotas, Gamybos metai: 1997, Overview This linear filling machine, model ALWID Matador-HV, was manufactured in 1997 and is designed for filling liquid products into various bottle formats in small to medium-sized production environments. The machine operates based on the high vacuum filling principle, which enables level-controlled filling and ensures consistent fill heights. The filling machine is equipped with five filling stations and achieves a capacity of approximately 1,000 bottles per hour at 0.7 L. One advantage of the system is that the filling machine itself does not require format parts, allowing for flexible processing of different bottle sizes. The corresponding capping system can process both PP screw caps and swing top closures (grip corks). For this purpose, the machine features two cap sorting bowls, one for each closure type. There are around ten format sets available for the capping unit, covering round and square bottles from 0.2 L to 1.0 L. With its conventional control system and robust mechanical design, the ALWID Matador-HV is a reliable solution for filling applications involving beverages, spirits, or specialty liquids. Technical Data Manufacturer: ALWID Model: Matador-HV Machine type: Linear filling machine (high vacuum filler) Year of manufacture: 1997 Filling principle: High vacuum filling with level control Number of filling stations: 5 Capacity: approx. 1,000 bottles per hour (at 0.7 L) Bottle formats: 0.2 L – 1.0 L Bottle shapes: Round, Square Closure types: PP screw caps, T-cork closures (grip corks) Closure sorting systems: 2 sorting bowls (PP caps / grip closures) Format sets (capper): approx. 10 sets Control system: Conventional control Condition: Used Giedpfx Aceyuufpj Der

Būklė: naudotas, Gamybos metai: 2017, Overview The ALWID-SUPERIOR-16D/4SK filling machine was built in 2017 by the German manufacturer ALWID. The machine was used by a company producing sauces in Germany. After the bankruptcy, BEVMAQ took over and stored the machine. This filler is a piston filler, capable of filling volumes from 0.1 to 1.0 liters into containers made of plastic or glass. The filling volume can be easily adjusted. Closures are pressed on; adaptation for screw caps is possible. In addition to sauces, the machine can also be used for dressings, spirits, or mayonnaise. Subsurface (bottom-up) filling enables the filling of products that tend to foam. Technical Data - Capacity: 6,000 bottles per hour (based on 250ml bottle volume) - Tests have shown that mayonnaise can also be filled at 6,000 bottles per hour with 500ml bottles - Working direction: left to right - Number of filling stations: 16 - Number of capping elements: 4 - Siemens controls - Bottom-up filling process (subsurface filling) - Automatic lowering and lifting of the filling nozzles during operation Gsdpfswwq Sfsx Ac Dsir Scope of Delivery: - Filler - Capper - Cap sorting unit - Cap feed

Būklė: naudotas, Gamybos metai: 2021, Overview The filler and capper block was manufactured in 2021 by the German company ALWID. It is part of a new filling line and is capable of filling chemical products into plastic containers. The machine features ATEX certification, enabling the processing of explosive products. The machine can be purchased with a warranty. Technical Data - Fully automatic rotary filler - Filling system: Mass flow meter system, Type: Endress+Hauser LPG MASS - Number of filling stations: 16 filling stations - Max. container dimensions: Height: 50–300 mm, Diameter: 20–100 mm - Pressurized feed tank for constant flow through the flow meter - Bottom-up filling to prevent foaming during the filling process - Adjustable bottle neck centering - Electronic fill level measurement - CIP capable - Designed for dip-tube processing Fully automatic rotary capper - Number of capping heads: 5, with torque adjustment via slip clutches - Fully automatic cap sorting and feeding via BONINO disc sorter with elevator - Chute switch to stop the machine when caps are missing - Cap hopper Gjdpfsmk I Dtjx Ac Dsir - Cap presence control

Būklė: naudotas, Gamybos metai: 2017, Overview This semi-automatic new glass unloader was built in 2017 by the German manufacturer Alwid. The machine is professionally stored and can be inspected in person at any time. Technical Details Semi-automatic new glass unloader with interchangeable gripper units 4 heads: adjustable according to layer pattern ALWID FEED TABLE + ALWID DEPALLETIZER Gjdevtpc Aspfx Ac Dsir

Būklė: naudotas, Gamybos metai: 2016, Apžvalga Ši kompaktiška uždarymo mašina buvo pagaminta 2016 m. vokiečių įmonės ALWID. Pagrindinės dalys pagamintos iš nerūdijančio plieno. Įrenginys sukurtas kaip linijinė sistema T formos kamštelių stiklo buteliams uždaryti. Mašina aprūpinta T formos kamščių uždarymo galva, skirta Ø34/19 mm ir 22/13 mm aukščio kamščiams. Dėl mūsų bendradarbiavimo su ALWID galime iš karto pasiūlyti pritaikymo rinkinius įvairiems buteliams ir uždoriams. Techniniai duomenys: Mobilus nerūdijančio plieno rėmas T-kamščių galvutė Ø34/19 mm ir 22/13 mm aukščiui Paduodamas kanalas Ø34/19 mm ir 22/13 mm aukščiui Rūšiavimo modulis su vibraciniu spiralinio transporterio ir garso izoliacijos gaubtu Konvejerio juosta Kamščio stabdis Apsauginis gaubtas su saugos jungikliu Elektrinė valdymo sistema SIEMENS Logo pagrindu Gjdpfxoxb Uncs Ac Doir

Būklė: naudotas, Gamybos metai: 2021, Overview The filling line was manufactured in 2021 by the German company ALWID. The filling line is new and can fill chemical products into plastic containers. With the exception of the bottle infeed and Posimat, glass bottles can also be processed. Thanks to ATEX certification, the line is suitable for processing explosive products. The system comes with a 2-year warranty (single-shift operation), and all components can be purchased individually. Technical details Performance: 9,000 containers/h (varies depending on bottle volume and product) Containers: Max. diameter: 100 mm, Max. height: 300 mm Control system: Siemens S7 Individual machines Bottle Unscrambler | ALWID | POSIMAT-ACCESS-N15 Bottle feeding system with 2000 l hopper, made of stainless steel, chassis and supports in painted mild steel Gsdemfqm Dopfx Ac Dsir Positronic control system for optimal adjustment to downstream filler Machine fully internally wired with attached control cabinet in painted mild steel Machine compliant with CE regulations; i.e. max. noise level of ≤ 80 dB +/- 2 Combined filling and capping machine (block system) | ALWID | SUPERIOR-16MDM-5SK Fully automatic rotary filler Filling system: mass flow measurement system, type: Endress+Hauser LPG MASS Number of filling stations: 16 Filling valve diameter: Ø12 mm Max. container dimensions: Height: 50-300 mm, Ø: 20-100 mm Fully automatic rotary capper Number of capping heads: 5, with torque adjustment via slip clutches With fully automatic cap sorting and feeding via BONINO disc sorter with elevator, including gravity chute switch for machine shutdown if caps are missing Checkweigher | ALWID | OCS-HC-M-2000-1 Applied safety and machinery guidelines: CE compliant Industrial load cell with stainless steel housing using electromagnetic force compensation principle Force bypass-free current transmission at the load cell Front cover to reduce external influences on weighing results Stainless steel control cabinet Graphical color TFT touchscreen, 10.4 inch, VGA resolution Flexible operation via tiltable stainless steel control terminal Freely configurable user interface for simple, intuitive operation Inkjet printer | Domino | Ax350i Fast printing of texts and multi-line codes at high speeds Labeler | ALWID | SES-120-III tandem version Max. label height: 120 mm Photoelectric sensor for label detection 2 x automatic rewinding stations incl. counterpressure plate Mounting device with height adjustment for side label dispensers With adjustable side guides - passage width up to 150 mm Conveyor system

Būklė: naudotas, Gamybos metai: 2021, Overview The bottle orienter was manufactured in 2021 by the German company ALWID. It is part of a new bottling line and is capable of filling chemical products into plastic containers. The machine is ATEX certified, enabling it to process explosive products. The machine can be purchased with warranty. Technical Data Capacity 12,000 bottles/hour with 50 ml HDPE, oval 43 x 23 x 95 mm 14,000 bottles/hour with 250 ml HDPE, Ø60 mm x 126 mm Including 2 format sets for handling the above-mentioned bottle sizes Fully enclosed in cabin, machine frame and wall panels made of stainless steel Gjdpfx Aemk I Dwsc Deir Base frame made of standard steel, painted (similar to RAL 9006 silver grey) Fast access via large-format doors and easily removable panels Automatic rejection of defective bottles Easy format change through quick-change system without tools Siemens S7 control system Bottle feeding unit with 1,000 l hopper, made of stainless steel, chassis and supports made of standard steel, painted Positronic control system for optimal integration with downstream filler

Būklė: naudotas, Gamybos metai: 2023, Overview This rotary vacuum capping machine was manufactured by Alwid (Germany) in 2023. The machine is equipped with three vacuum capping heads and is configured for TO82 twist-off caps on round jars. It is in excellent condition and comes with infeed and outfeed conveyors. The machine is immediately available. Technical Data Capacity: approx. 1,000–1,400 jars/h Formats: round jars Ø77/86 mm, 90 mm height; TO82 twist-off caps Godpfjxbrzaox Ac Dsir Operating direction: right to left Working height: adjustable from 850 mm Electrical connection: 400 V, 50 Hz, 3-phase/N/PE Capping heads: 3 vacuum heads with torque adjustment via hysteresis clutch Conveyor belt: 1.5 m infeed + 1.5 m outfeed, stainless steel chain, width 82.5 mm Control system: Siemens S7 HMI (German) Construction: base frame made of V2A stainless steel, collecting tray, capping unit, CE-compliant safety enclosure with Makrolon panels and safety doors Scope of Delivery Alwid Favorit-3SK rotary vacuum capping machine (2023) Integrated conveyor belts (1.5 m infeed + 1.5 m outfeed) Note: Feed separation unit and additional format parts available as options.

Būklė: naudotas, Gamybos metai: 2019, Overview This vacuum filling and capping block was manufactured in 2019 by the German company ALWID Maschinenbau GmbH. The model ALWID-SUPERIOR-48HV-10PP is designed for filling glass bottles using a high-vacuum system, making it ideal for low- to medium-viscosity liquids such as spirits or similar products. The system is equipped with 48 filling valves and a 10-head ROPP capping unit, ensuring efficient and highly precise operation. With a capacity of up to 12,500 bottles per hour (0.7 L), it offers a professional solution for high-speed bottling lines. The machine is CIP-compatible, fitted with spray balls, and equipped with a Siemens S7 control system. It has approximately 14,000 operating hours and has already been dismantled. Missing peripheral components such as cap sorter, cap hopper/elevator, and chutes can be supplied upon request; a factory overhaul is also available. Technical Data Filling system: High vacuum with liquid ring pump Capping system: 10-head ROPP (PP) capper Output: Up to 12,500 bottles per hour (0.7 L bottles) Filling valves: 48 Bottle size: Max 105 mm (W) × 65 mm (D) for shaped bottles (every other valve used) Control system: Siemens S7 Cleaning system: CIP with spray balls Gisdpoxqhvljfx Ac Djr Operating hours: Approx. 14,000 h Operating direction: Right to left Dimensions (machine): 4.20 m × 2.80 m × 2.90 m (W×D×H) Dimensions (filler tower): 1.40 m × 1.30 m × 3.40 m (W×D×H) Scope of supply Filling and capping block | ALWID Maschinenbau GmbH | ALWID-SUPERIOR-48HV-10PP | 2019 | High vacuum filler with 48 filling points and 10 ROPP capping heads, Siemens S7 control, CIP-compatible, approx. 14,000 operating hours Filler tower | ALWID Maschinenbau GmbH | – | 2019 | 3.40 × 1.30 × 1.40 m, part of the system Format parts | ALWID Maschinenbau GmbH | – | 2019 | 10x PP28x22 mm deep capping heads, 1x format set for 76 mm straight-neck bottles Accessories | 2 Euro pallets with format and head components

Būklė: naudotas, Gamybos metai: 2024, Overview: The ALWID KRONE-D is a semi-automatic dosing filler. The machine is suitable for volumetric filling of non-carbonated liquids (from low to high viscosity) for the pharmaceutical, chemical, and food industries. Process: The ALWID KRONE-D is a semi-automatic machine. The operator manually places the bottles on the height-adjustable worktable and presses the START switch at each filling valve. This allows for individual bottle filling as needed. Once the START switch is pressed, the filling valve moves down and opens. The bottle is filled, after which the filling valve closes and automatically moves up when the preset volume is reached. The machine can be used for various liquids, bottle shapes, and sizes without requiring additional format parts. The fill volume can be easily and quickly adjusted using interchangeable volume adjustment rods. Subsurface filling is possible when foaming products need to be filled. The machine is mobile and can be wheeled. Gedpfxsxb Umrs Ac Djir Technical data: - Number of filling stations: 2, expandable to 4 - Filling valve diameter: - Fill volume: 100–1000 ml - Machine casing: stainless steel - Product-contacting parts: stainless steel, glass, and plastic - Pneumatic connection: R 1/2" / 6 bar - Electrical connection: not required

Būklė: naudotas, Gamybos metai: 2020, Apžvalga Ši Vokietijos gamintojo ALWID pilstymo mašina yra su 8 užpildymo galvutėmis ir specialiai sukurta mažo tūrio butelių (100 ml) užpildymui. Tiksli dozavimą užtikrina masės srauto matuokliai (Coriolio principas) iš žinomo gamintojo Endress+Hauser – jie garantuoja didelį tikslumą ir pasikartojamumą. Techniniai duomenys: Gamintojas: ALWID Užpildymo galvučių skaičius: 8 Našumas: 8 000 – 10 000 /val. Darbo kryptis: iš dešinės į kairę Užpildymo tūris: skirta 100 ml (galima reguliuoti ir kitiems tūriams) Dozavimo sistema: Endress+Hauser masės srauto matuokliai Tipinė paskirtis: žemos ir vidutinės klampos skysčiams Svarbiausios savybės: Higieniška konstrukcija lengvam valymui (CIP) Tinka farmacijos, kosmetikos, maisto produktų ar chemijos pramonei Didelis užpildymo tikslumas, naudojant masės srauto technologiją Reguliuojamas užpildymo vamzdelių judėjimas. Gsdpexb Umfsfx Ac Doir

Būklė: naudotas, Gamybos metai: 2019, Apžvalga: ALWID-KRONE-HV yra pusiau automatinė užpildymo mašina, veikianti aukšto vakuumo principu. Šis modelis tinka pilstyti neputojančius skysčius į formą išlaikančias talpas. Gali būti naudojamos įvairios butelių formos ir dydžiai, nereikia jokių formato detalių. Užpildymo lygis reguliuojamas tiesiai ant vožtuvo, todėl jis išlieka pastovus nepriklausomai nuo butelio tūrio. Vakuumo lygis reguliuojamas. Techniniai duomenys: Užpildymo vietos: 2 Užpildymo vožtuvo skersmuo: mm Tinka pilstyti didelio klampumo medžiagas Pritaikymo sritys: maisto, gėrimų, farmacijos ir chemijos pramonė. Gjdpfx Acjxb Unis Djir

Būklė: labai geros būklės (naudotas), CATALOG NUMBER 7503 TECHNICAL DATA: - Max planing width: 610 mm - Max planing height (two-sided): 200 mm - Max planing height (four-sided): 100 mm Top side: - 2 rubber feed rollers - 2 toothed feed rollers - Metal feed roller - Toothed infeed drive shaft - Pawls - Pressure unit - 2 toothed drive shafts - Pressure unit - 610 mm planing shaft, 4-knife, 7.5 kW - Pressure unit - Smooth metal feed roller - Pressure unit - Profiling shaft, 7.5 kW - Pressure unit - Rubber feed roller Bottom side: - Planing shaft, spindle diameter 35 mm, shaft length 130 mm, 2.2 kW - 2 guide bars - Infeed table - Smooth drive shaft - 610 mm planing shaft, 4-knife (currently equipped with 2 knives), 7.5 kW - 2 smooth drive shafts - Split metal sliding roller - Side pressure Rear side: - Side spindles with 2 pressure units - 1) Right vertical spindle 95 mm, 4 kW - 2) Left vertical spindle 95 mm, 4 kW - Spindle diameter: 35 mm - Spindles adjustable up/down, right/left - Adjustable rollers in the lower table - Electric thickness adjustment - 6 feed speeds: 7/9/11.5/14/18/23 m/min - Feed motor: 3.1 kW - Extraction ports diameters: 3×120 mm, 3×160 mm - Dimensions (L/W/H): 3150 x 1900 x 1600 mm Gjdpfeyz Sfbsx Ac Deir - Weight approx. 3500 kg ADVANTAGES: – The best wide planer for wet and dry wood – Perfect for processing logs, flooring, etc. – Additional profiling shaft and planing shaft (scorer) – 4 horizontal planing shafts + 2 vertical spindles – Manufactured by German brand KUPFERMUHLE – Used planer, in very good condition Net price: 66,900 PLN Net price: 15,930 EUR (based on 4.2 EUR exchange rate) (Prices may vary with exchange rate fluctuations)

Būklė: labai geros būklės (naudotas), Catalog number 7275 Gsdpfeytdkxex Ac Doir TECHNICAL DATA - Max. planing width: 610 mm - Max. planing height: 200 mm From above: - toothed feed roller - return pawls - 2 pressure rollers - toothed feed roller - pressure roller - planing shaft 610 mm, 4-knife, 7.5 kW - pressure rollers - smooth feed roller From below: - guide rail - adjustable infeed table with smooth, split sliding roller - planing shaft 610 mm, 4-knife, 5.5 kW - 2 smooth sliding feed rollers - side pressure roller From the rear: - side spindles + 2 pressure rollers: 1) right vertical 5.5 kW 2) left vertical 5 kW - Max. planing height on side spindles: 200 mm - Spindle diameter: 35 mm - Spindles adjustable up/down, left/right 3) additional horizontal spindle 160 mm, adjustable up/down, left/right, and angle, approx. 4 kW - Option to plane with the additional spindle from above/below/side - Spindle diameter 35 mm - Adjustable rollers in the lower table - 2 feed speed levels - Feed motor 2.2 kW - Extraction port diameter 120 mm - Dimensions (LxWxH): 2550 x 1700 x 1350 mm - Weight approx. 3000 kg ADVANTAGES - Wide planer for wet and dry wood - Ideal for processing beams, flooring, etc. - 2 horizontal planing shafts + 2 vertical spindles + 1 horizontal spindle - Cutter heads included - Manufactured by German brand KUPFERMUHLE - Used planer, very good condition Original photos Net price: 58,900 PLN Net price: 14,020 EUR (exchange rate: 4.2 EUR) (Prices are subject to change due to exchange rate fluctuations)

Būklė: labai geros būklės (naudotas), Catalogue number 7640 FEATURES – The best wide planer for both wet and dry wood – Ideal for processing logs, flooring boards, etc. – 2 planing cutterheads + 3 spindles – Manufactured in Germany by KUPFERMUHLE – Used planer in very good condition TECHNICAL SPECIFICATIONS - Maximum planing width: 610 mm Gsdpfjyaq Tajx Ac Doir - Maximum planing height: 200 mm - Top section: - Powered infeed shaft, toothed - Pawls - Pressure unit - 2 driven shafts, toothed - Pressure unit - Planing shaft 610 mm, 6 knives, 15 kW - Pressure units - Outfeed shaft, smooth, powered - Bottom section: - Side pressure at infeed - Guide rail - Infeed table - Driven shaft, toothed - Planing shaft 610 mm, 6 knives, 7.5 kW - 2 driven shafts, smooth - Side pressure at outfeed - Rear section: 2 vertical spindles + pressure units: 1) Right vertical 200 mm, 15 kW 2) Left vertical 200 mm, 15 kW - Left vertical spindle electrically adjustable (right/left) - Spindle diameter: 40 mm - Alternately adjustable spindle position - Spindles adjustable up/down, right/left 3) Additional bottom horizontal spindle 160 mm, adjustable up/down + right/left, 5.5 kW - Spindle diameter: 35 mm - Outfeed: 2 upper metal slip rollers, 2 lower driven rubber rollers - Adjustable rollers in bottom table - Electric planing height adjustment - 6 feed speeds: 12.8/16.3/20/25.6/32.6/40 m/min - Feed drive motor: 8 kW - Extraction port diameters: 2×120, 2×160 mm - Dimensions (LxWxH): 2980x1980x1800 mm - Weight: approx. 3500 kg Net price: 66,900 PLN Net price: 15,920 EUR (based on the rate of 4.2 EUR) (Prices may change with higher fluctuations)

Būklė: naudotas, Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 20082, įvesties srovės tipas: trifazis, bendras plotis: 2 000 mm, bendras ilgis: 6 700 mm, įėjimo įtampa: 400 V, įėjimo srovė: 10 A, 32 C – GERBER XLS-125-180-L Automatic Spreader – Industrial Spreading System Description For sale is a GERBER XLS-125-180-L automatic fabric spreader, designed for high-volume textile and garment production. This industrial spreading system enables precise and efficient multi-layer spreading of fabrics directly onto a conveyor table. The motorized spreading carriage ensures consistent material feed, accurate alignment, and a constant production speed, making the system ideal for demanding production environments. The machine is considered a proven workhorse in the industry and can process a wide range of materials, from heavy denim to lightweight fabrics. The system was operated as part of a fully integrated cutting line together with a Lectra Vectorfashion VT-FA-Q2-72 cutter (unit 35 C) and a FINN-CONVEY V307 conveyor system (unit 30 C). This combination significantly enhances production flow, reduces manual labor, and enables continuous high-performance operation. The unit was in use in a professional apparel manufacturing facility and was fully functional until the plant closure. Last serviced on 27.02.2026. Operating video available (05.03.2026). Scope of Delivery • GERBER XLS automatic fabric spreader • Motorized spreading carriage • Roll holding system • Integrated touchscreen control panel • Fabric alignment and infeed system • Mounted rail system for table use Technical Data • Manufacturer: Gerber Technology • Model: XLS-125-180-L • Year of manufacture: 2009 • Serial number: 20082 • Max. roll weight: 125 kg Godpfxoy Alcio Ac Deir • Max. roll diameter: approx. 600–650 mm • Machine weight: approx. 400 kg • Spreading width: up to 1800 mm • Speed: up to approx. 100 m/min (material dependent) • Voltage: 3 x 380–415 V • Frequency: 50/60 Hz • Current draw: approx. 10 A Key Features • Fully automatic spreading to reduce manual labor • Suitable for roll and folded goods • Precise tension control to prevent material distortion • Accurate edge alignment for material optimization • Touchscreen operation for easy programming • Integrated safety systems including emergency stop and sensors Production Advantages • High precision reduces material waste • Fast spreading increases cutting room efficiency • Even tension ensures dimensionally stable cuts • Optimal preparation for multi-layer cutting Maintenance & Reliability Gerber spreading systems are renowned for good parts availability and long service life. Condition Used, production-ready condition Fully functional prior to decommissioning Last serviced on 27.02.2026 Operating video available (05.03.2026) Normal signs of use from production Inspection prior to dismantling possible Sale as inspected (“as-is, where-is”), without warranty Typical Applications • Automatic fabric spreading • Preparation for multi-layer cutting • Denim and heavy fabric processing • High-volume garment manufacturing • Cutting room applications Location Valga, Estonia Dismantling and Transport To be organized by the buyer Professional dismantling is recommended due to the size of the system

Būklė: labai geros būklės (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, bendras plotis: 800 mm, bendras ilgis: 1 600 mm, bendras aukštis: 600 mm, bendras svoris: 220 kg, liuko vieta: priekis, tuščias svoris: 215 kg, įėjimo įtampa: 16 V, The Alfa Laval DuraCirc 73 is a hygienic rotary piston (peristaltic) pump specifically designed for use in the food and pharmaceutical industries, where high standards of hygiene and reliability are essential. This pump is engineered to meet stringent sanitary requirements and holds certifications such as EHEDG and 3-A, which guarantee its suitability for demanding sanitary applications. Key performance parameters include a flow rate of 103.0 m³/h and a maximum operating pressure of 16.0 bar. The pump is powered by a 7.5 kW electric motor, ensuring efficient and reliable operation. Its compact dimensions are approximately 0.85 m in length, 0.45 m in width, and 0.5 m in height, with a total weight of 215 kg, making it suitable for integration into various production lines. Gisdey Ammvepfx Ac Der The DuraCirc 73 features optimized seals and surfaces, enabling effective Clean-in-Place (CIP) and Sterilize-in-Place (SIP) processes, ensuring ease of maintenance and hygiene. Its durability is enhanced by profiled compression elastomers and a robust build. Maintenance is simplified thanks to a single, front-mounted mechanical seal, which allows rapid replacement without dismantling piping installations. The pump supports operation over a wide range of pressures and flow rates, and offers optional reversible flow direction to accommodate different process requirements. It is available with flushed or double seal options, and can be mounted on a base plate for added stability. The motor is fitted with cooling fins and a protective cover for thermal management and safety. It is mounted on a stainless steel base with adjustable feet, providing a stable and adjustable mounting platform. The motor shows signs of wear and scratches on the paint coating, which is typical for used equipment. A yellow electric cable is connected to the motor, indicating readiness for electrical hookup. In summary, the Alfa Laval DuraCirc 73 combines high sanitary standards with robust performance and ease of maintenance, making it a reliable choice for demanding industrial pumping applications where hygiene is paramount.

Būklė: naujas, Gamybos metai: 2026, Machine Characteristics Heavy, Stable Cast Iron Frame: The robust structure based on a heavy cast iron frame ensures stability and durability even under intensive use. Milling Head Height Adjustment on the Support: Unique height adjustment on the support, not the column, allows the machine to be adapted for a wide range of applications. Heavy-Duty Cross Table for Mill/Drill: The table features impressive dimensions with a precisely ground surface, providing a solid foundation for a variety of projects. Dovetail Guides: Innovative dovetail-shaped guides guarantee smooth movement on all three axes, resulting in excellent machining accuracy. Quiet Operation Thanks to Ground Gears: Precisely ground gears ensure quiet operation, enhancing comfort in the workshop environment. Left and Right Spindle Rotation: Operate the tool in both directions to accommodate diverse tasks. +/- 90 Degree Swiveling and Height-Adjustable Head: Flexible angle and height adjustment provide maximum control over material processing. Digital Longitudinal and Cross Readouts Additional Options and Benefits: The ZX 7045E DRO model is available from stock and comes with a free accessory kit: Drill Chuck MT4/MT3 Reducing Sleeve MT3/MT2 Reducing Sleeve The ZX 7045E DRO mill-drill machine is a high-precision, advanced tool designed for reliable metalworking performance. Equipped with digital readout systems (DRO) and sturdy construction, it allows for precise milling and drilling on a wide range of materials. Its versatility and dependability make the ZX 7045E DRO the ideal equipment for professional workshops, meeting the demands of even the most complex applications. (Base available as an option) Technical Specifications Maximum drilling diameter: 45 mm Maximum face mill diameter: 80 mm Maximum end mill diameter: 28 mm Maximum thread diameter: 12 mm Quill travel: 100 mm Spindle taper: MT4 Spindle speed (6 speeds): 95, 170, 280, 540, 960, 1600 rpm Max. distance from spindle end to table: 460 mm Travel on X/Y/Z axis: 500 / 210 / 425 mm Distance spindle to column surface: 245 mm Worktable dimensions: 730x210 mm Base dimensions: 400x600 mm Motor power S1/S6: 1500W/2100W 400V Giedpfx Asx Dkr Nec Der Machine dimensions (height with base): 1080 x 770 x 1460 mm Weight: 278 kg Standard Equipment 2-axis digital readout MT3/B18 drill chuck arbor Service tools Keyless drill chuck 3–16 mm/B18 MT4/MT3 reducing sleeve MT3/MT2 reducing sleeve Operator’s manual

Būklė: naujas, Gamybos metai: 2026, The ZX 7045E mill-drill is a versatile machining tool designed for steelworking. It excels in drilling, reaming, boring, tapping, as well as conventional and face milling. The machine provides precise drilling in cast iron up to 45/40 mm diameter. In addition, it enables tapping up to M12 mm, milling up to 80 mm width, and slotting to a depth of 22 mm. The ZX 7045E mill-drill is a reliable tool ready for immediate use! Machine Features - Heavy Duty Cast Iron Base: Robust construction based on a heavy cast iron frame ensures stability and durability, even during intensive use. - Milling Head Height Adjustment on the Support: Unique height adjustment on the support, rather than on the column, allows for adaptation to a wide range of applications. - Large Cross Table: A substantial, precisely ground table surface provides a solid work foundation for a variety of projects. - Dovetail Guides: Innovative dovetail-shaped guides ensure smooth movement along three axes, resulting in excellent machining accuracy. - Quiet Operation with Ground Gears: Ground gears guarantee low-noise operation, enhancing workshop comfort. - Left and Right Spindle Rotation: Enables bi-directional tool rotation to suit various tasks. - Head Rotates +/- 90 Degrees with Adjustable Height: Flexible angle and height adjustment for complete control over material handling. Additional Options and Benefits: The ZX 7045E is available for immediate delivery from stock and comes with a complimentary accessory set: Giedpfoud Iztox Ac Djr - Drill chuck - MT4/MT3 reducing sleeve - MT3/MT2 reducing sleeve The ZX 7045E mill-drill is more than just a tool; it’s a partner capable of meeting even the most demanding challenges in your workshop. Order now and experience outstanding precision and performance! (Base available as an option) Technical Data Maximum drilling diameter: 45 mm Maximum face mill diameter: 80 mm Maximum end-mill diameter: 28 mm Maximum tapping size: 12 mm Quill travel: 100 mm Spindle taper: MT4 Spindle speeds (6 speeds at 1400 rpm motor): 95, 170, 280, 540, 960, 1600 rpm Max. distance spindle nose to table: 460 mm X/Y/Z travel: 500 / 210 / 425 mm Distance spindle to column: 245 mm Table size: 730 x 210 mm Base size: 400 x 600 mm Motor (S1/S6): 1500W/2100W 400V Overall dimensions (with base): 1080 x 770 x 1460 mm Weight: 278 kg Standard Equipment Includes: - Drill chuck arbor MK3/B18 - Basic service tools - Drill chuck 3–16 mm/B18 - Reducing sleeve MT4/MT3 - Reducing sleeve MT3/MT2

Būklė: labai geros būklės (naudotas), veikimo valandos: 4 h, Funkcionalumas: visiškai funkcionalus, bendras plotis: 2 000 mm, bendras aukštis: 2 200 mm, bendras ilgis: 1 900 mm, darbinis plotis: 1 300 mm, šlifavimo plotis: 1 300 mm, bendras svoris: 3 200 kg, aukščio reguliavimo tipas: elektrinis, stalo plotis: 1 300 mm, padavimo variklio galia: 35 W, įėjimo įtampa: 400 V, transporto ilgis: 2 100 mm, transporto aukštis: 2 200 mm, transporto plotis: 2 000 mm, A high-performance wide belt sander, designed for processing wood-based panels, solid wood, plastics, and metal. Suitable for both rough and fine sanding, it ensures excellent surface quality as well as stable and reproducible results. The machine features two independently controlled sanding belt units, allowing the simultaneous use of two different grit sizes. Each sanding belt is equipped with individual speed control, effectively preventing scratches, overheating, and clogging of the abrasive. The conveyor belt table, in combination with precise height adjustment, allows sanding of materials up to 100 mm thick. Material thickness is set via a control panel with digital display, providing high accuracy and user-friendly operation. Each sanding drum is equipped with continuously variable speed control via frequency inverters, as well as sensors for belt tracking. These systems prevent lateral belt drift and automatically stop the machine in case of deviations to protect both the machine and the workpiece. The sander is equipped with a central extraction system and can be connected via Ø100-mm extraction ports to industrial dust collection systems or vacuum cleaners. In addition, each sanding belt has a pneumatic cleaning system that continuously removes sanding dust during operation. Changing sanding belts is quick and uncomplicated—by releasing a single tensioning device, the belt can be removed. The machine is compatible with standard sanding belts joined with tape. No special or proprietary abrasives are required. MAIN FEATURES • Working width: 1300 mm • Two independently controlled sanding belt units • Simultaneous use of two different grit sizes possible • Stepless speed adjustment of each sanding belt (frequency inverter) • Sanding capacity up to 100 mm material thickness • Conveyor belt table with height adjustment • Digital control panel • Pneumatic belt tensioning system Gedpfx Acjmrqlno Deir • Pneumatic belt cleaning system • Extraction ports Ø100 mm • Fast and easy sanding belt change • Semi-automatic operation Condition of the machine: The machine is in very good condition. It has only been used for short-term demonstration purposes.

Būklė: labai geros būklės (naudotas), For sale: Hioki CT6711 – precision current probe designed for accurate current measurements in laboratory, R&D, service, and industrial applications. The CT6711 model provides safe, non-invasive current measurement with high resolution and extremely wide bandwidth, making it ideal for use with oscilloscopes and power analyzers. Key features: • Current range up to 30 A • Bandwidth up to 120 MHz • High measurement accuracy and stability • Fast range switching • Demag / Auto Zero functions • Robust, professional construction • Manufactured in Japan Condition: • Fully functional • Excellent visual condition • Equipment removed from laboratory / industrial use Included: • Hioki CT6711 current probe • Control module • Complete set of cables • Original transport case • Manufacturer documentation (manuals) The equipment is ready for operation – no hidden defects. Applications: • AC/DC current measurements Gedpjyc Idbjfx Ac Deir • Power electronics • Research & development (R&D) • Servicing inverters, power supplies, drives • Laboratories and maintenance departments

Būklė: naujas, Gamybos metai: 2026, The CORMAK PT410S Thickness and Surface Planer with spiral cutterhead is a professional industrial-grade woodworking machine, combining the functions of a jointer and thickness planer in one compact unit. Equipped with a modern spiral cutterhead, it delivers maximum machining precision, outstanding surface finish, and quiet operation. It is an excellent choice for carpentry shops, furniture manufacturing, and workshops valuing efficiency, accuracy, and reliability. Gisdpfxoyy Nl Ns Ac Dor Main advantages of the CORMAK PT410S Thickness and Surface Planer: - Spiral cutterhead – minimizes noise, reduces cutting resistance, and allows for perfect wood surface finish, even with challenging wood types. - Quick function change – seamless transition from planer to thickness mode thanks to separately opening tables and dust extraction cover. - Robust construction – heavy cast iron frame and tables provide stiffness and reduced vibrations during operation. - Precise adjustment – clear measurement scale and precision adjustment mechanism for planing depth and fence angle. - High efficiency – up to 4.0 kW (S6 duty) motor ensures smooth and effective machining even for wide workpieces. Design and technology: The CORMAK PT410QS is engineered for years of intensive use. Its cast iron jointer tables assure excellent flatness and stability for the workpiece, while the centrally mounted thickness table guarantees uniform lifting. The oscillating aluminum fence with precise scale allows for setting angles from 90° to 45° for optimal material guidance. Precision and performance: Thanks to its 95 mm diameter spiral cutterhead spinning at 4300 rpm, the thickness planer delivers even, smooth surfaces—even on hard or resinous wood. Feed runs smoothly, with no vibrations or risk of fiber tear-out. Planing height adjustment up to 220 mm enables processing of large components, both solid wood and laminated panels. Applications: The CORMAK PT410S Planer-Thicknesser is perfectly suited for: - carpentry and furniture shops - artisan workshops - stair and wood component production - processing of solid wood and laminated panels This is a machine intended for demanding users seeking precise and trouble-free jointer-thicknessers. Standard equipment: - Cast iron surfacer tables - Spiral cutterhead - Cutterhead guard - Chip extraction outlet - Feed switch - Emergency stop Optional equipment: - Transport trolley - Knife setting device - Mortising/drilling attachment Technical specifications: - Planer table size: 1680 x 410 mm - Thickness table size: 750 x 410 mm - Cutting head diameter: 95 mm - Spindle speed: 4300 rpm - Fence tilt angle: 90–45° - Chip extraction outlet: 100 mm - Maximum thicknessing height: 220 mm - Motor power: 4.0 kW / 400V - Maximum workpiece width: 410 mm - Dimensions: 1680 x 1100 x 1100 mm - Weight: 360 kg