Šviestuvas Iris pirkti naudotą (1 207)

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, WOODGRAIN GF-1500 Chain Trencher max 12/15 HP TRENCH DIMENSIONS: 600 X 100 MM The WOODGRAIN GF-1500 chain trencher is a professional machine designed for creating trenches for cables, pipes, irrigation systems, water line installations, and similar uses. With its precision, speed, and compact dimensions, it easily carries out trenching work close to fences or other structures, including hard-to-access areas and even in very hard soil! Requires only one operator to use. Machine Specifications: - CE Certificate, Technical Documentation: YES - Engine Displacement: 420 cc - Fuel: Petrol - Performance: 60 m/h - Trenching Width: 100 mm - Trenching Depth: 150, 300, 450, 600 mm - Teeth: 27 carbide-tipped teeth - Chain Length: 2000 mm - Chain Speed (max): 550 m/min - Tyres: 145/7.0-6 - Height: 1100 mm - Length: 2100 mm - Width: 720 mm - Gross Weight: 188 kg Engine Technology: Four-stroke, single cylinder, air-cooled, OHV (overhead valve) - Displacement (cm³): 420 - Cylinder: Cast iron liner - Cylinder Diameter (mm): 90.0 - Stroke (mm): 66.0 - Max Speed: 3600 rpm - Fuel Tank Capacity (l): 6.6 - Oil Capacity (l): 1.1 - Dry Engine Weight (kg): 31.0 - Dimensions: Length (mm): 499 - Width (mm): 370 - Height (mm): 443 - Max Engine Power (EPS*): 15 HP Bljdpfevzqk Rox Aahsd *EFFECTIVE POWER SOLUTIONS Engine Features: - OHV technology – optimized performance ensures longer engine lifespan and better fuel efficiency - Lo-Tone PRO muffler – lowest audible noise level (significantly lower dB) - Dual air filters – prevents airborne contaminants from entering the engine (protection) - Rotational speed adjustment – controls speed for more usable power in tough conditions - Cast iron liner – provides reinforcement and durability, ensuring resistance to wear and excessive use, while improving oil control - Dual ball bearings – extra durability and longer engine life - Float carburetor – provides precise fuel dosing, easier engine starting, and reduced fuel consumption - High torque – more power, higher performance - Protective shield for excavated material ejection

Sąlyga: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, Coordinated cross table with a working surface made of precision-ground cast iron. Equipped with T-slots allowing secure clamping of the workpiece. Designed for precision machining, milling, and drilling, ensuring high accuracy thanks to a precise vernier scale of 0.02 mm. Technical data Vise size [mm]: 125 Base size [mm]: 200x270 Table size [mm]: 475x154 Transverse travel [mm]: 150 Longitudinal travel [mm]: 320 Vernier scale [mm]: 0.02 Blodevu Tnxopfx Aahod T-slot width [mm]: 16 Bolt spacing [mm]: 175 Overall dimensions [mm]: 772 x 440 x 180 Weight [kg]: 28

Sąlyga: naujas, Gamybos metai: 2026, The ideal machine for processing high-density boards, MDF panels, ABS panels, PVC, solid wood, as well as other wood-based materials or those with a similar structure and hardness. The machine is built on a robust welded steel chassis with a fixed cast iron table and a moveable sliding table made from high-strength profiled aluminum. This machine is perfect for both professionals and amateur woodworkers. Panel saw with scorer for wood by Cormak The Cormak MJ45KB3-1600 panel saw with independent scoring unit is an excellent machine for precise woodworking operations. This innovative machine offers many advanced solutions to ensure top-quality cuts. Key features of the Cormak panel saw with scorer: - 1600 mm aluminum sliding table allowing smooth movement along the workpiece and delivering precise cuts up to a length of 1600 mm. - Telescopic crosscut arm with a 1600 mm scale and two stops for accurate and stable guidance of the workpiece. - Robust mounting of the sawblade unit in a cast iron housing, guaranteeing machine durability and reliability. - Precise table carriage guidance on steel rods for smooth and accurate panel cutting strokes. - Support table equipped with rollers for easier handling and enhanced stability when processing large panels. - Powerful drive motor with high torque for optimal cutting quality. - Adjustable, folding parallel fence, ideal for working with larger panels. - Handwheel with angle scale for tilting the main saw blade up to 45°. - Handwheel for setting the cutting height of both the main blade and the scorer. - Telescopic longitudinal fence with dual flip-over stops for precision repeat cuts. - Stable saw unit with tilting elements on both sides, cast from durable iron. - Table extension option for cuts up to 1200 mm wide, included as standard. - Large cast iron main table, carefully machined and ground for maximum stability and accuracy. - Standard model includes an independently-driven 0.75 kW scorer and a robust 5.5 kW main saw blade, both easily adjustable by separate, convenient wheels. Application of panel saws for wood, scorer This sliding table saw is the perfect tool for professional applications where quality, precision, and reliability are essential in woodworking. Thanks to its advanced features and solid construction, it is ready to meet even the most demanding tasks in any joinery workshop. Technical specifications: SLIDING TABLE LENGTH: 1600 mm CUTTING WIDTH: 1250 mm SAW TILT: 0-45° Bjdpfx Aaotz Srljhold MAX. CUTTING HEIGHT AT 90°: 80 mm MAX. CUTTING HEIGHT AT 45°: 56 mm MAX. SAW BLADE DIAMETER: 315 mm MAX. SCORING BLADE DIAMETER: 125 mm MAIN SAW SPEED: 4000/6000 rpm SCORING BLADE SPEED: 8000 rpm MAIN MOTOR POWER (S1/S6): 5.5 kW / 9 HP SCORER MOTOR POWER (S1/S6): 0.75 kW / 1.2 HP WEIGHT: 460 kg

Sąlyga: naujas, Gamybos metai: 2026, The industrial geared drilling machine Z5040L delivers optimum drilling performance. It features robust construction and high power, making it suitable for use in repair workshops as well as in industrial manufacturing. The drill is equipped with a solid, adjustable cube table, automatic feed, a sturdy gearbox with a wide speed range, right/left rotation, and an adjustable drilling depth stop with scale. The machine also includes an integrated cooling system. CORMAK Z5040L Column Drill - Machine Description - Automatic spindle feed - Cube table, rotatable around the column, tilting 45° right/left - Work area illumination - Tapping capability - Work table and base equipped with T-slots Blodpfx Asridxxsahsd - Right/left spindle rotation - Drilling depth indicator CORMAK Z5040L Column Drill - Technical Specifications MAX. DRILLING DIAMETER: 40 mm NUMBER OF SPEEDS: 18 TAPPING CAPACITY STEEL/CAST IRON: 22/24 mm DISTANCE FROM SPINDLE CENTER TO COLUMN SURFACE: 350 mm MAX. DISTANCE SPINDLE NOSE TO WORKTABLE: 770 mm MAX. DISTANCE SPINDLE NOSE TO BASE: 1215 mm MAX. SPINDLE TRAVEL: 185 mm SPINDLE TAPER: MT 4 FEED RANGE: 0.1 mm; 0.2 mm SPINDLE SPEED RANGE: 75 - 1450 rpm WORKTABLE DIMENSIONS: 560 x 520 mm SIDE TABLE DIMENSIONS: 560 x 250 mm BASE DIMENSIONS: 730 x 500 mm T-SLOT WIDTH: 18 mm MOTOR POWER: 1.5 kW COOLANT PUMP POWER: 75 W OVERALL DIMENSIONS: 2230 x 560 x 850 mm WEIGHT: 510 kg

Sąlyga: naujas, Gamybos metai: 2026, The CORMAK WS32BC bench drill is a precision column drilling machine for metal, equipped with automatic spindle feed and a cooling system, designed for demanding drilling and tapping operations. Thanks to its 8-speed gearbox, robust construction, and comprehensive equipment, it is suitable for intensive industrial use. Key machine features: - Adjustable automatic spindle feed up to 110 mm/min – facilitates work and increases process repeatability. - Cooling system – protects tools from overheating and improves machining quality. - Tapping function – automatic spindle reversal enables efficient tapping up to M24. - High structural rigidity – a 100 mm diameter column and heavy-duty base eliminate vibrations. - 150 mm spindle stroke – allows deep drilling without cycle interruption. - 8-speed gearbox – 140–1960 rpm range provides precise adjustment of parameters. - Work safety – spindle and belt guards with limit switches conforming to CE standards. Bledporigaqefx Aahed Design and technology The CORMAK WS32BC bench drilling machine is built from seasoned, precision-machined cast iron components. The spindle and gearbox shafts are made of hardened steel for increased durability and wear resistance. A Morse taper MK3 ensures quick tool changes and compatibility with a wide range of tooling. The stable table, rotatable 360°, facilitates the machining of components with various shapes. Precision and performance With automatic feed and cooling, the WS32BC metal bench drill guarantees high hole quality and significantly reduces cycle times. The powerful 1.1 kW main motor and 0.12 kW feed drive deliver efficient operation even under heavy loads. Ideal for drilling, reaming, and tapping in steel, cast iron, and alloy materials. Applications The CORMAK WS32BC drill with auto-feed is an excellent solution for: - Toolrooms and metalworking shops - Maintenance departments - Manufacturing plants - Technical schools and training centers Standard equipment: - Keyed drill chuck - Morse taper drift - Cooling system - U-type spindle guard with limit switch - Belt drive guard with safety cut-off Technical data | Parameter | Value | |-----|-----| | Max drilling diameter (steel) | 32 mm | | Max tapping diameter (steel) | M24 | | Column diameter | 100 mm | | Column wall thickness | 12.7 mm | | Spindle stroke | 150 mm | | Feed rate | 0–110 mm/min | | Spindle to column distance | 265 mm | | Spindle to table distance | 390 mm | | Spindle to base distance | 745 mm | | Spindle taper | MK3 | | Speed range | 140, 250, 380, 500, 580, 850, 1250, 1960 rpm | | Number of speeds | 8 | | Table dimensions | 380 × 400 mm | | Base dimensions | 645 × 470 mm | | Machine height | 1370 mm | | Main motor power | 1.1 kW | | Feed motor power | 0.12 kW | | Power supply | 400 V | | Net weight | 230 kg | | Machine dimensions | 900 × 500 × 1400 mm |

Sąlyga: naujas, Gamybos metai: 2026, CORMAK Z7016A Vario Bench Drill for Metal – Precision Column Drill with Infinitely Variable Speed Control The CORMAK Z7016 Vario bench drill is a compact and functional pillar drill designed for precise drilling operations in professional and workshop settings. Its stepless speed adjustment, robust construction, and versatile features provide maximum control over the drilling process and high work efficiency. Key Machine Advantages - Infinitely variable speed control – range from 440 to 2600 rpm allows for optimal adjustment to the machined material. - Robust cast iron construction – ensures high rigidity and reduces vibration during operation. - Worktable with height and tilt adjustment – tiltable from -45° to +45° and equipped with rack-and-pinion height adjustment. - Laser alignment and LED lighting – guarantee maximum drilling precision and user comfort. - Electronic speed display – enables complete real-time parameter monitoring. - 65 mm vise included – machine ready to work immediately after unpacking. Design and Technology The Z7016A Vario metal bench drill is built on a solid 60 mm diameter column and a rigid cast iron base measuring 345 × 210 mm. The machine body and table are manufactured from precision-machined castings. The MT2 taper allows for a wide range of tool fits, and a 60 mm quill stroke enables deep hole drilling. The overall height of just 870 mm makes it an exceptionally ergonomic and mobile unit. Precision and Work Efficiency Equipped with a 500 W (S1) and 650 W (S6) motor, the CORMAK Z7016A Vario pillar drill enables efficient drilling in metal up to 16 mm in diameter. No need for belt changes – thanks to the seamless speed adjustment, machine setup time is significantly reduced. The ergonomic three-arm feed lever, depth gauge, and guided quill system ensure high repeatability and hole accuracy. Bsdpoxbzuvsfx Aahjld Applications The Z7016A Vario is a bench drill for metal recommended for: - Metal and maintenance workshops - Maintenance departments - Technical schools - Small production lines and prototyping facilities Standard Equipment - 65 mm vise - Laser drilling pointer - LED work area illumination - Electronic speed display - Three-arm feed lever - Tilting table with rack-and-pinion height adjustment Technical Specifications Parameter Value Maximum drilling diameter 16 mm Spindle speed range 440 – 2600 rpm Power supply 230 V Spindle taper MT2 Max. quill travel 60 mm Distance spindle to column 125 mm Distance spindle to base 430 mm Table height adjustment range 300 mm Column diameter 60 mm Table dimensions 200 × 200 mm Base dimensions 345 × 210 mm T-slot width 14 mm Motor power (S1 / S6) 500 W / 650 W Overall height 870 mm Weight 31.5 kg

Sąlyga: naujas, Gamybos metai: 2026, The ZX7045 B1 DRO milling and drilling machine is an advanced tool designed for precise metalworking. It excels in drilling, reaming, and enlarging holes up to 45/40 mm in cast iron, as well as tapping threads up to M12 mm. With a milling capacity of up to 80 mm width and keyway milling up to 22 mm, this machine ensures versatile use. The ZX7045 B1 DRO variant is distinguished by an automatic spindle feed, increasing operational efficiency. Additionally, it is equipped with digital readout for enhanced accuracy, and a cooling system to maintain optimal temperature during machining. This machine is ready for immediate use and available directly from stock. It is ideal for professionals seeking high quality and performance in metalworking. Product Features: - HEAVY, STURDY CAST IRON CONSTRUCTION - AUTOMATIC SPINDLE FEED - MILLING HEAD HEIGHT IS ADJUSTED ON THE SUPPORT, NOT THE COLUMN - ADDITIONAL LIQUID COOLING - MASSIVE CROSS TABLE WITH PRECISELY GROUND SURFACE - DOVETAIL GUIDEWAYS - QUIET OPERATION THANKS TO GROUND GEARS - LEFT AND RIGHT SPINDLE ROTATION - ROTATING HEAD +/- 90° - ADJUSTABLE HEAD HEIGHT - DIGITAL READOUT - Optional base available Bledpfx Asud H H Ueahsd TECHNICAL SPECIFICATIONS: DRILLING CAPACITY IN STEEL: 32 mm DRILLING CAPACITY IN CAST IRON: 45 mm FACE MILLING CUTTER DIAMETER: 80 mm END MILL CUTTER DIAMETER: 28 mm SPINDLE SPEEDS: 50, 95, 100, 180, 190, 355, 360, 655, 710, 1260, 1310, 2520 rpm (6/12) SPINDLE TAPER: MT4 SPINDLE TRAVEL: 125 mm (AUTOMATIC FEED) WORK TABLE DIMENSIONS: 820 mm x 240 mm BASE DIMENSIONS: 580 x 600 mm MAX SPINDLE TO TABLE DISTANCE: 445 mm SPINDLE TO COLUMN DISTANCE: 260 mm TRAVEL X/Y/Z AXIS: 515/175/430 mm QUILL FEED RATE: 0.12; 0.18; 0.25 mm/rev HEAD SWIVEL LEFT/RIGHT: 90° MOTOR POWER: 1.8 kW (2.5 HP) POWER SUPPLY: 400 V WEIGHT: 350 kg Available Accessories: - Drill chuck arbor MK4/B18 - Digital readout - Hand tools - Drill chuck 3-16 mm/B18 - Reducing sleeve MK4/MK3 - Reducing sleeve MK3/MK2 - Operating manual in English

Sąlyga: naujas, Gamybos metai: 2026, The lathe is ideally suited for efficient and precise machining of metal parts as well as other materials. The machine features capabilities for machining internal and external cylindrical surfaces, face surfaces, tapered, semi-circular surfaces, and threading. The bed is a solid cast iron construction, resistant to vibrations. The guides are induction-hardened and ground. Technical data TURNING DIAMETER OVER BED 320 mm TURNING DIAMETER OVER CARRIAGE 160 mm DISTANCE BETWEEN CENTERS 750 mm SPINDLE SPEED 100-2500 rpm SPINDLE BORE 46 mm SPINDLE NOSE MT5 NUMBER OF TOOLS 6 TOOL SIZE 16x16 mm MAXIMUM DIAMETER OF WORKPIECE THROUGH SPINDLE 44 mm TAILSTOCK QUILL MT3 MAXIMUM TAILSTOCK TRAVEL 100 mm MOTOR POWER 3 kW DIMENSIONS 2370 x 1420 x 2000 mm NET WEIGHT 950/1300 kg Bledpfoi Apg Usx Aahod Available equipment SINUMERIK 808D control unit in Polish SIEMENS servo drives 3-jaw hydraulic lathe chuck 6-position turret head Set of soft jaws Hydraulic tailstock Cooling system Automatic lubrication system for gears and guides 24V halogen lighting Technical documentation in Polish CE declaration The listed price is NET (excluding VAT). Price does not include transport costs. For more information, please contact us by phone or email. We also invite you to visit our website to view our full offer.

Sąlyga: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, The workshop parts washer is a versatile tool that should be present in every service station, garage, or workshop. This indispensable device enables quick and cost-effective removal of contaminants. A major advantage is the ability to use the washer indoors. Cleaning is performed in a closed circuit using a cleaning fluid heated up to 70°C. The solution is dispensed from the nozzle pistol under pressure up to 8 bar, allowing thorough cleaning of hard-to-reach areas and heavily soiled parts, such as those contaminated with soot, grease, or oil. Both the temperature and the cleaning agent boost washing effectiveness. Adjustable feet allow for leveling. The washer is highly effective for turbocharger reconditioning and cleaning heavily soiled parts made of steel, cast iron, aluminum, and other alloys. The washer lid is fitted with pneumatic actuators to increase safety and improve ease of use. The washer features a dual-function spray gun that allows dispensing either compressed air only or air mixed with the cleaning agent. The cleaned part can be dried with compressed air. The washer is equipped with an intuitive control panel. - Adjustable water temperature - Smooth air pressure adjustment - Pressure gauge - Separate switch for fluid/water heating - Separate switch for power supply Bsdpsuc Tn Asfx Aaheld Technical data: - Capacity: 160 L - Detergent heating: up to 70°C - Bath fluid capacity: 8–14 L - Working pressure: 5–8 bar - Weight: 47 kg - Dimensions: 770 x 600 x 1330 mm - Air regulation - Pneumatic spray gun - Illuminated workspace - Ventilation Please note that the washer is delivered as a flat-pack for self-assembly. The price does not apply to machines purchased in Poland.

Sąlyga: naujas, Gamybos metai: 2026, Industrial radial drill press features a simple and rigid design, enabling a wide range of applications in hole processing such as drilling, reaming, counterboring, boring, and tapping. Machine Description - Drill press designed for drilling, tapping, and reaming; - Minimized vibrations due to the special machine design—additional ribbing and reinforced cast iron construction; - Oil-lubricated gearbox with ground and hardened gears made from high-quality steel alloy; Bljdpfog Rcd Usx Aahod - Heavy weight and rigid construction ensure stability and vibration-free operation; - Cubic worktable provides easy adaptation and clamping of the workpiece; - Large-diameter, ground steel column; - Ground base plate designed for machining larger components; - Motorized height adjustment of the arm; - Control panel located at the front of the drill for enhanced efficiency and ergonomics; - Mechanical clamping of the arm and headstock; - Boom arm height conveniently set via a lift motor; - Hydraulically operated feed and spindle drive; - Ground column surface allows for smooth, precise movement of the arm; - Ground and hardened boom guideway; - Drill equipped with manual headstock and column arm locking; - Wide speed range ensures precise and rapid machining; Technical Data MAXIMUM DRILLING DIAMETER – 50 mm DISTANCE SPINDLE AXIS TO COLUMN – 350 – 1600 mm DISTANCE SPINDLE AXIS TO TABLE SURFACE – 320 – 1220 mm SPINDLE QUILL TRAVEL – 390 mm HORIZONTAL HEADSTOCK TRAVEL – 1250 mm VERTICAL BOOM TRAVEL – 590 mm SPINDLE TAPER – MT5 SPINDLE SPEED (16 steps) – 25 – 2000 rpm FEED RANGE (16 steps) – 0.04–3.2 mm/rev MAIN MOTOR POWER – 4.0/5.5 kW LIFT MOTOR POWER – 1.5 kW MACHINE DIMENSIONS – 2500x1070x2840 mm WEIGHT – 3500 kg The listed price is NET. Price does not include transport costs. For further information, please contact us by phone or email. We invite you to view our full offer on our website.

Sąlyga: naujas, Gamybos metai: 2026, Large and stable radial drilling machine with a wide range of spindle speeds, ensuring precise and fast machining. Machine features - High weight and rigid construction provide stability and vibration-free operation - Box table enables easy positioning and clamping of the workpiece Blsdpoi D Daqofx Aahod - Motorized arm height adjustment - Control panel located at the front of the drill for improved efficiency and operator ergonomics - Ground column surface ensures smooth, easy, and precise arm movement - Manual locking of the drilling head and column arm - Wide speed range allows for precise and efficient machining Technical specifications MAX. DRILLING DIAMETER Cast Iron: 32 mm; Steel: 32 mm SPINDLE DISTANCE TO BASE 340 - 1125 mm SPINDLE AXIS DISTANCE TO COLUMN SURFACE 330 - 890 mm SPINDLE STROKE 215 mm SPINDLE TAPER MT4 SPINDLE SPEEDS (6 steps) 75, 130, 240, 380, 660, 1200 rpm SPINDLE FEED (3 steps) 0.10; 0.16; 0.25 mm/rev HORIZONTAL SWIVEL ANGLE 180 degrees MAIN MOTOR POWER 2.2 kW WORKTABLE DIMENSIONS 500 x 330 x 294 mm MACHINE DIMENSIONS 1400 x 660 x 2100 mm WEIGHT 950 kg The listed price is NET. Price does not include transport costs. For more information, please contact us by phone or e-mail. We invite you to browse our full offer on our website.

Sąlyga: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, The ideal machine for both professionals and hobbyist carpenters. The tilting spindle allows you to expand the use of standard tools. Thanks to its robust construction, it is suitable for use in both small workshops and large carpentry factories. PRECISE TABLE GUIDANCE FOR TENONING ON AN ALUMINUM BAR WITH BUILT-IN STEEL RODS! The spindle moulder table is made from cast iron, ground and polished. - Machine base made from welded steel sheet - Precise spindle height adjustment via large handwheel - Precise adjustment of the milling fence - Stable bearing of the milling unit with column guide - Easy change between 4 spindle speeds: 1800 / 3000 / 6000 / 9000 rpm - V-belt drive - Easy replacement of milling tool - Tilting spindle from -10° to +35° - Mechanical feed is available as an optional extra Standard equipment: - 30 mm spindle - Tenoning table - Extension for the sliding table - Side and top pressure for the workpiece - Precise adjustment of the milling fence - Mitre fence - Operation manual in Polish - CE Declaration Technical data: Table size [mm]: 640 x 710 Bledpfx Aaevugccshsd Spindle stroke [mm]: 100 Spindle length [mm]: 100 Max. tool diameter under table [mm]: 80 Max. tool diameter above table [mm]: 200 Table opening diameter [mm]: 185 Spindle diameter [mm]: 30 Spindle speeds [rpm]: 1800, 3000, 6000, 9000 Spindle tilt [°]: from -10° to 30° Motor power [kW]: S1 2.8 kW / S6 4.0 kW Power supply: 400V Weight [kg]: 170 Warranty [months]: 12 Instruction manual (DTR): Polish

Sąlyga: naujas, Gamybos metai: 2026, Industrial Metal Lathe CORMAK GOLIAT 660 x 4000 mm – robust cast iron bed construction, equipped with a 12-speed gearbox and a powerful 7.5 kW / 400V induction motor – maximum torque and large spindle bore of 105 mm. Main Features: - Central feed shifting system, equipped with leadscrew and feed shaft for threading. - Digital readout operates on three axes: longitudinal, cross, and top slide. The processed electronic signal from optical scales visualizes movement values along the axes on the digital display. - The lathe is fitted with a high-quality, reinforced spindle bearing system. The main spindle uses modern ball bearings. - Optimum performance is ensured by a large spindle bore of 105 mm, 4000 mm centre distance, 320 mm three-jaw chuck, and a powerful 7.5 kW motor. - The rapid longitudinal and cross feed system significantly reduces machining time and increases productivity. - Hardened and ground gears in the headstock ensure long-term operational stability. - Equipped with leadscrew and feed shaft for thread cutting, automatic longitudinal and cross feeds. - Easy adjustment of spindle speed and automatic feed from ergonomic control panel on the gearbox. - Wide threading range without the need to change gears in the quick-change gearbox. Extensive threading range: metric (22) 1 – 14 mm, imperial (25) 2-28 TPI, module (18) 0.5-7 M.P., DP (24) 4-56 D.P. Capable of cutting right and left-hand threads. - Threading dial for precise thread pitch counting. This function saves time, enabling rapid disengagement of the leadscrew nut to quickly return the carriage to its original position by hand in several passes. - The bed is fitted with a removable gap bridge for turning large workpieces such as discs. This lathe model allows machining of up to 870 mm maximum diameter with the gap bridge removed. Technical Data Maximum turning diameter over bed: Ø660 mm Bledpfjvw Abgjx Aahsd Maximum turning diameter over carriage: Ø420 mm Maximum turning diameter in gap: Ø870 mm Gap length: 240 mm Centre distance: 4000 mm Maximum turning length: 3950 mm Spindle bore: Ø105 mm Spindle nose diameter and taper: Ø113 mm 1:20 Spindle mount: D1-8 CAMLOCK Spindle speeds: 12 speeds (36-1600 rpm) Number and range of longitudinal feeds: 65 (0.063-2.52 mm/rev) Number and range of cross feeds: 65 (0.027-1.07 mm/rev) Metric threads: 22 (1-14 mm) Imperial threads: 25 (28-2 TPI) Module threads: 18 (0.5-7 mm) DP threads: 24 (56-4 DP) Rapid longitudinal feed: 4.5 m/min Rapid cross feed: 1.9 m/min Leadscrew pitch: 12 mm Spindle axis to tool surface distance: 28 mm Tool size: 25x25 mm Maximum top slide travel: 145 mm Maximum cross slide travel: 380 mm Tailstock quill diameter: 75 mm Tailstock taper: MT5 Maximum tailstock quill travel: 150 mm Tailstock offset: ±15 mm Main motor S1/S6: 7.5/9 kW / 400V Rapid feed motor: 250 W Coolant pump: 60 W, 25 L/min Overall dimensions (L/W/H): 5500 x 1100 x 1450 mm Weight: 5,200 kg

Sąlyga: naujas, Gamybos metai: 2026, High-performance and precise CNC milling plotter CORMAK C1325 BSP, equipped as standard with SERVO drives. The rigid construction made of steel and cast iron ensures proper rigidity and resistance to overloads occurring during operation. This machine is designed for processing and cutting wooden materials, chipboards, MDF, OSB, plywood, as well as synthetic materials such as PVC, plexiglass, and dibond. Each machine purchase includes free training at our headquarters! Construction - Welded rigid steel frame, - Gantry arms made from thick, powder-coated, hardened steel sheet, providing increased rigidity and higher machining accuracy of the workpiece. Work Table - Hybrid technology work table, - T-slots for manual clamping of materials up to 1300 x 2500 mm. Drive System - High-power drive motors ensure rapid acceleration and high speeds in all directions. - X and Y axes operate on user-acclaimed, high-quality HIWIN rack guides for enhanced durability and precision. - All axes ride on rail-type linear guides. - Equipped with tool height sensor. - Linear bearings: trapezoidal rails. Bodpfxsiz A Ezs Aahjld Spindle - High-class spindle characterized by excellent durability. - Additional air-cooling system. - Equipped with high-quality machine bearings for extremely quiet operation and increased longevity. - Tool height measurement sensor included. - Spindle speed range: 4,500–18,000 RPM. - Tool clamping with ER32 collets (3 pcs included): 1/8", 1/2", and 5-6 mm diameters. Software - Supplied as standard with ARTCAM PRO software. - Optional: UCANCAM V11 CAD/CAM CNC software (Polish version available). - Allows quick and easy design of parts, converting projects to G-code; import of files from other programs possible. DSP Control - Digital Signal Processing (DSP). - Machine controller features dedicated processor and RAM for reliable, user-friendly operation. - Controller ensures smooth performance and machining accuracy. - No need to restart the program upon power loss. - Built-in controller memory allows repeated operation without having to reload the program. Technical Specifications Spindle: 5.5 kW / 18,000 RPM inverter, air-cooled Working area: 1,300 x 2,500 mm Maximum spindle height: 350 mm Control: DSP Program resolution: 0.001 mm Software: Included Power supply: 400V Weight: 980 kg Machine dimensions: 2,100 x 3,100 x 2,200 mm Table height: 715 mm Guideways: linear Drive transmission: rack and pinion IMPORTANT! The machine is equipped with a function that saves the last G-code path. In case of a malfunction or power failure, it resumes work from the last point, avoiding loss of time and material. For more information, please contact us.

Sąlyga: naujas, Gamybos metai: 2026, Universal arbor press made from high-quality cast iron. Products in this series offer extensive capabilities within one reliable and cost-effective device. Easy to operate for processes such as bushing, bending, straightening, and reaming. Machine Features - Suitable for installation and removal of bearings, bushings, and pins - High-quality cast iron construction - Table adjustable to four positions - Suitable for all types of workshops Technical Specifications - Pressing force: 3 t - Maximum ram height (from fixed table surface): 310 mm - Ram reach: 145 mm - Fixed table dimensions: 190×180 mm - Rotary table dimensions: Ø166×20 mm - Rotary table hole diameters: 18, 25, 36, 46 mm - Ram dimensions: 38×38 mm - Base dimensions: 455×195 mm - Height with ram lowered: 570 mm (without lever) - Weight: 63 kg Bsdpov Hqfrjfx Aahsld Manufacturer: Cormak

Sąlyga: naujas, Gamybos metai: 2026, Powerful, large metal bandsaw with a swiveling arm, enabling cuts both perpendicular to the axis of the workpiece and at any angle from -45° left to 60° right. This bandsaw is ideal for cutting pipes, profiles, and solid materials. Product Features Material can be fed manually or with any mechanical device, while the blade feed is automatic. The appropriate cutting speed (blade feed rate) is set via the control panel. The arm is a rigid structure made of profiled cast iron. Drive is transmitted from the electric motor to the blade drive wheel by a maintenance-free worm gear motor. The saw blade is tensioned between two cast iron wheels using a manual tensioner and guided in adjustable carbide roller and sliding guides. The base is a rigid housing welded from steel plates. Inside, there is a separate coolant tank with an electric pump. The upper part of the base is shaped as a tray to collect coolant and chips generated during the cutting process. The worktable, with a swiveling arm adjustable from -45° to +60°, is attached to the cast iron construction base. The control panel is mounted on a separate arm. During cutting, the main cutting motion is the movement of the bandsaw blade. The arm's downward speed (cutting speed) is adjusted by a hydraulic cylinder. The feed rate can be set from the saw's control panel. Two blade speeds are available: 36 and 72 m/min. At the bottom position of the arm (after cutting is completed), the blade drive is automatically switched off. Safety is assured by blade covers and micro-switches that stop the motor after the cutting cycle or if any cover is opened. Additional protection consists of automatic shutdown if the blade breaks. Technical Specifications Cutting blade size [mm]: 2715 x 27 x 0.9 Blade tension: mechanical (manual) Blodpoi D Ddijfx Aahjd Blade speeds [m/min]: 36, 72 Arm descent control: stepless - hydraulic cylinder Vise base height [mm]: 765 Minimum workpiece length in vise [mm]: 100 Power supply: 3-phase 400V Total power [kW]: S1 100%: 1.5; S6 40%: 2.1 Coolant pump motor power [kW]: 0.025 Weight [kg]: 370 Warranty [months]: 12 User manual: Polish CE Declaration: yes Cutting Capacity | Angle | Round [mm] | Rectangular [mm] | Square [mm] | |-----|-----|-----|-----| | 0° | ø250 | 310 x 210 | 240 x 240 | | 45° R | ø200 | 200 x 140 | 180 x 180 | | 45° L | ø165 | 185 x 145 | 160 x 160 | | 60° R | ø120 | 120 x 95 | 100 x 100 | The price quoted is NET. Price does not include shipping costs. For more information, please contact us by phone or email. We invite you to explore our offer on our website.

Sąlyga: naujas, Gamybos metai: 2026, Industrial metal lathe CORMAK TORNADO 460x1500 – featuring a cast base twice the standard thickness and a robust cast iron bed, equipped with a 12-speed gearbox and a powerful 5.5 kW / 400V induction motor delivering maximum torque and a large 82 mm spindle bore. Key advantages: - Versatility of applications: This lathe is perfect for a wide variety of tasks, including internal and external turning, taper turning, threading (metric, inch, module, DP), polishing, drilling, and broaching. - Stable construction: The 300 mm wide cast iron bed is hardened and precisely ground, ensuring substantial vibration reduction and stable operating conditions even under heavy loads. - Digital precision: The machine is fitted with a dual-axis digital readout (longitudinal and cross) displaying precise displacement values on screen via optical measuring scales. - High-quality spindle: A reinforced bearing system and large 82 mm spindle bore ensure optimal performance. Included are a 3-jaw chuck (250 mm), a 4-jaw chuck (320 mm), and a 5.5 kW motor. Blsdpfxevzzqbs Aahsd - Efficiency and productivity: Rapid longitudinal and cross feed via joystick significantly reduces machining time, while hardened and ground gears in the spindle gearbox guarantee durability and long-term reliability. - Wide threading capability: Thread cutting functions for metric, inch, module, and DP threads (right and left-handed) with adjustable parameters without gear wheel changes, for faster and more convenient operation. Supported threads include: metric (41 ranges) from 0.1 to 14 mm, inch (60 ranges) from 2 to 112 TPI, module (34 ranges) from 0.1 to 7 M.P., and DP (50 ranges) from 4 to 112 D.P. - Precise thread counting: Equipped with a thread dial indicator, enabling quick repositioning of the carriage after disengaging the leadscrew nut. - Ergonomics and ease of use: An intuitive control panel on the gearbox allows for quick adjustments of spindle speed and automatic feed rate. - Large workpiece capability: The removable gap bed section enables turning of workpieces up to 690 mm in diameter and 240 mm in length (with gap removed), expanding the machine’s capabilities. Technical specifications: Turning diameter over bed ø460 mm Turning diameter over cross slide ø274 mm Turning diameter with gap (diameter x width) 690 mm x 240 mm Centre height 230 mm Distance between centres 1500 mm Bed width 300 mm Max tool shank size 25 x 25 mm Total cross slide travel 290 mm Total top slide travel 120 mm Spindle bore diameter ø82 mm Spindle nose D1-8 Spindle taper ø90 (1:20) Number of spindle speeds 12 Spindle speed range 25–2000 rpm Lead screw diameter and pitch ø35 mm x 6 mm Imperial threads Pitch 2–112 TPI (60) Metric threads 0.1–14 mm (41) DP gears 4–112 D.P. (50) Module gears 0.1–7 M.P. (34) Longitudinal feed 0.031–1.7 mm/rev (42) Cross feed 0.014–0.784 mm/rev (42) Tailstock quill travel 120 mm Tailstock quill diameter ø60 mm Quill taper MT No. 4 Spindle drive motor 5.5 kW Coolant pump motor 0.09 kW Machine dimensions (LxWxH) 2720 x 1040 x 1340 mm Weight 2445 kg

Sąlyga: naujas, Gamybos metai: 2026, The CORMAK WS32BGP pillar drill is a professional column drilling machine for metals, designed for heavy-duty use in production facilities, toolrooms, and maintenance workshops. Thanks to its precise construction, powerful motor, and integrated feeds and cooling systems, it ensures efficient and safe operation for drilling and tapping holes in steel up to 32 mm in diameter. Main machine advantages - Automatic spindle feed – allows precise tool guidance without operator fatigue, increasing work efficiency. - Tapping function with automatic spindle reverse – enables effective tapping up to M20 in steel. - Large spindle travel – 150 mm – enables deep hole machining without interrupting the process. - High structural rigidity – body and column made from seasoned cast iron guarantee stability even under maximum load. - Eight spindle speeds – a wide range (140–1960 rpm) allows for optimal adjustment to the material being processed. - Cooling system – increases tool life and improves machining quality. Construction and technology The design of the CORMAK WS32BGP pillar drill is based on a solid 100 mm diameter column and a heavy base ensuring rigidity and stable operation. Headstock, column, and table are made from high-grade cast iron. The spindle is mounted on precision bearings and features a Morse taper MK3. Gear shafts are manufactured from case-hardened, heat-treated steel for outstanding durability of the entire drive system. Operator safety is enhanced by a U-type spindle guard with limit switch and a V-belt drive guard with safety interlock. Precision and performance Thanks to automatic feed and a wide spindle speed range, this machine delivers exceptional drilling accuracy and repeatability. The high-quality control panel and built-in LED lamp ensure intuitive operation and work comfort even in poorly lit areas. The worktable rotates 360° and its height can be adjusted manually, ensuring operational flexibility. Applications The CORMAK WS32BGP column drill is dedicated to industrial metalworking and is suitable for: - steel fabrication shops, - maintenance departments, - toolrooms, - small and medium-sized manufacturing businesses, - technical schools and training centers. Standard equipment - Key-type drill chuck (Morse taper MK3) - Cooling system - Drift for taper removal - Built-in LED lamp - CE-compliant safety guards Technical data Maximum drilling diameter in steel: 32 mm Maximum tapping diameter in steel: M20 Column diameter: 100 mm Bljdpfxsridqbj Aahjd Column wall thickness: 12.7 mm Spindle travel: 150 mm Spindle–column distance: 265 mm Table vertical travel: 820 mm Table rotation: 360° Max. spindle–base distance: 1235 mm Spindle fitting: MK3 Spindle speed range: 140–1960 rpm Number of speeds: 8 Table size: 380 × 400 mm Base size: 380 × 400 mm Machine height: 1900 mm Motor power: 1.5 kW Feed motor power: 0.12 kW Power supply: 400 V Net weight: 310 kg Packing dimensions: 1040 × 640 × 2050 mm

Sąlyga: naujas, Gamybos metai: 2026, Properties and Applications - Base made of high-durability cast iron, hardness approx. 40 HRC; fixed and movable jaws made of steel with hardness approx. 48-52 HRC - Changing the position of the jaw inserts allows for an increase of the working surface - The construction of the movable jaw ensures additional clamping of the workpiece to the base - Permissible base height deviation: ±0.015 mm - Multiple vises can be used simultaneously - Used on milling machines, CNC machines, and machining centers Technical Parameters QM16200N JAW WIDTH 200 mm JAW HEIGHT 50 mm JAW OPENING L1 MAX 190 mm JAW OPENING L2 MAX 275 mm JAW OPENING L3 MAX Bedpfx Aaovxgwzjheld 385 mm JAW OPENING L4 MAX 470 mm CROSS T-SLOT WIDTH 18 mm LONGITUDINAL T-SLOT WIDTH 18 mm HEXAGONAL SPINDLE HEAD 19 mm DIMENSIONS 517x200x135 mm WEIGHT 47 kg

Sąlyga: naujas, Gamybos metai: 2026, We offer a wide range of rotary, precision, and grinding machine vises. All products are made from high-quality materials and are renowned for their reliability and versatility. Vise Description The QH cast iron rotary machine vise is used with grinders, milling machines, drill presses, planers, and other equipment. - Manufactured from high-grade cast iron castings. - Equipped with a rotary base featuring a 360° scale graduated every 1°. - The body and movable jaw are made from high-quality cast iron. - The lead screw is protected from above to prevent contamination and swarf ingress. - The rotary base can be removed if required. Bsdpfevxgnyex Aahsld - When replacing the jaw inserts, the work surfaces interfacing with the vise must be machined to achieve the accuracy parameters specified in the technical documentation. Technical Specifications: Jaw width: 80 mm Jaw block height: 30 mm Jaw opening: 68 mm Rotary base: 360° Clamp wrench size: 14 mm Lead screw end width: 14 mm Screw thread: M10 Angular graduation: 2° Dimensions: 214x115x91 mm Weight: 6 kg

Sąlyga: naujas, Gamybos metai: 2026, Tested industrial machine! Successfully sold throughout Europe. Heavy-duty, professional, and user-friendly bandsaw with a robust construction. Enables precise adjustment of operating parameters, which directly translates into cutting efficiency. - The quick-release lever for the saw blade also allows for rapid blade removal - Precision cast iron machine table with ground and polished surface - Adjustable table tilt from -10° to 45° - Equipped with a viewing window for easy monitoring of blade tension Technical data: Wheel diameter [mm]: 680 Maximum cutting height [mm]: 430 Maximum cutting width [mm]: 700 Worktable dimensions (L x W) [mm]: 790 x 500 Table tilt [°]: -5 - 45 Blade width [mm]: 19 - 40 Blade length [mm]: 5020 Blade speed [m/s]: 18 Dimensions (L x W x H) [mm]: 1090 x 700 x 2430 Weight [kg]: 308 Motor power S1/S6 [kW]: 4.0 / 5.6 Extraction ports diameter [mm]: 2 x 100 Power supply: 3-phase, 400V Bjdpovugtnefx Aaheld The listed price is net. Transport not included.

Sąlyga: naujas, Gamybos metai: 2026, This grinder is designed for smaller woodworking shops. Its compact dimensions provide excellent mobility. The movable table and graphite guide ensure consistent speed and smooth belt movement. The machine bed is made of gray cast iron. Equipped with a linear fence for precise angle sanding, high stability thanks to the solid base, and a dust extraction device. Technical Data: - Belt size [mm]: 1220 x 150 - Disc size [mm]: 225 - Worktable size [mm]: 310 x 190 - Max. sanding length [mm]: 590 - Extraction port diameter [mm]: 60 Blsdpfevugrkex Aahod - Sanding angle [º]: 0º - 45º - Belt speed [m/s]: 5.5 - Disc speed [m/s]: 23 - Total motor power [W]: 750 - Weight [kg]: 54 - Warranty [months]: 12 For more information, please contact us by phone or email. We invite you to view our product range on our website.

Sąlyga: naujas, Gamybos metai: 2026, The Cormak PT265 jointer-planer is a robust and well-engineered machine, offering extensive adjustment possibilities and the capability to process both hard and soft wood mechanically. Adjusting the planer is straightforward and switching between jointer and thicknesser modes takes just a few seconds. Latest machine version with an innovative table opening system: ❌ Competing machines of the older design use 'butterfly' tables. Before each operation, the infeed and outfeed tables must be recalibrated relative to each other. Even slight misalignments can cause material damage and undesired results. ✔️ The new interconnected table system allows for precise, simultaneous adjustment of both tables. Once set, the tables remain permanently calibrated. When changing the planing height, both tables move in sync. ✔️ This solution not only saves time and increases working comfort but also improves planing accuracy by up to 30% compared to older systems. This enhancement is particularly crucial when working with thinner materials. Stable, vibration-resistant construction Bljdpfx Aaowu T S Aohsd The machine’s substantial weight of 170 kg, combined with wide, ground cast iron tables (265 mm), ensures a high level of stability and safe operation. Additional rubber feet enable operation without any noticeable vibration. VERSION with the most powerful S6: 2.6 kW motor The PT265 jointer-planer features an exceptionally powerful S6 2.6 kW (S1 2.2 kW) motor—significantly exceeding what competitive models offer, resulting in enhanced performance and stable operation. A more powerful motor ensures stable operation and makes processing hardwoods effortless: Hard timber requires greater force for machining, which this robust motor handles with ease. Effortless mode change from jointer to thicknesser Switching from jointer to thicknesser mode is very quick and easy. It only requires unlocking the eccentrics, lifting the tables, and repositioning the chip extraction hood. High working precision - Smooth height adjustment of the tables with scale. - The thicknessing table is centrally column-supported and equipped with a handwheel for up and down adjustments. - Aluminum tilting fence (700x150 mm) with scale allows for precise angle setting from 90 to 45 degrees. Technical specifications: Knife shaft diameter [mm]: 75 Knife shaft speed [rpm]: 4000 Suction port diameter [mm]: 100 Tilting fence angle [°]: 90 - 45 Number of knives: 3 Shaft length [mm]: 262 Knife dimensions [mm]: 250x30x3 Max. planing width (jointer) [mm]: 265 Max. planing width (thicknesser) [mm]: 265 Max. planing height [mm]: 180 Max. planing depth (thicknesser) [mm]: 3 Max. planing depth (jointer) [mm]: 2.5 Thicknesser feed speed [m/min]: 6 Fence dimensions [mm]: 700 x 150 Machine dimensions (L x W) [mm]: 1080 x 269 Weight [kg]: 170 Total motor power: S6: 2.6 kW Power supply: 230V

Sąlyga: naujas, Gamybos metai: 2026, Machine Characteristics Heavy, Stable Cast Iron Frame: The robust structure based on a heavy cast iron frame ensures stability and durability even under intensive use. Milling Head Height Adjustment on the Support: Unique height adjustment on the support, not the column, allows the machine to be adapted for a wide range of applications. Heavy-Duty Cross Table for Mill/Drill: The table features impressive dimensions with a precisely ground surface, providing a solid foundation for a variety of projects. Dovetail Guides: Innovative dovetail-shaped guides guarantee smooth movement on all three axes, resulting in excellent machining accuracy. Quiet Operation Thanks to Ground Gears: Precisely ground gears ensure quiet operation, enhancing comfort in the workshop environment. Left and Right Spindle Rotation: Operate the tool in both directions to accommodate diverse tasks. +/- 90 Degree Swiveling and Height-Adjustable Head: Flexible angle and height adjustment provide maximum control over material processing. Digital Longitudinal and Cross Readouts Additional Options and Benefits: The ZX 7045E DRO model is available from stock and comes with a free accessory kit: Drill Chuck MT4/MT3 Reducing Sleeve MT3/MT2 Reducing Sleeve The ZX 7045E DRO mill-drill machine is a high-precision, advanced tool designed for reliable metalworking performance. Equipped with digital readout systems (DRO) and sturdy construction, it allows for precise milling and drilling on a wide range of materials. Its versatility and dependability make the ZX 7045E DRO the ideal equipment for professional workshops, meeting the demands of even the most complex applications. (Base available as an option) Technical Specifications Bledpfex Dkr Nsx Aahsd Maximum drilling diameter: 45 mm Maximum face mill diameter: 80 mm Maximum end mill diameter: 28 mm Maximum thread diameter: 12 mm Quill travel: 100 mm Spindle taper: MT4 Spindle speed (6 speeds): 95, 170, 280, 540, 960, 1600 rpm Max. distance from spindle end to table: 460 mm Travel on X/Y/Z axis: 500 / 210 / 425 mm Distance spindle to column surface: 245 mm Worktable dimensions: 730x210 mm Base dimensions: 400x600 mm Motor power S1/S6: 1500W/2100W 400V Machine dimensions (height with base): 1080 x 770 x 1460 mm Weight: 278 kg Standard Equipment 2-axis digital readout MT3/B18 drill chuck arbor Service tools Keyless drill chuck 3–16 mm/B18 MT4/MT3 reducing sleeve MT3/MT2 reducing sleeve Operator’s manual

Sąlyga: naujas, Gamybos metai: 2026, Rotary machine vise, recommended as standard equipment for milling machines, drill presses, planers, etc. Its lightweight design contributes greatly to the popularity of these vises. Features and Applications Bsdpfxovxgi Do Aaheld The QH rotary cast iron machine vise is used for operations on grinders, milling machines, drill presses, planers, etc. Made from high-quality cast iron. Equipped with a 360° rotary base with 1° graduations. The body and the movable jaw are made from high-grade cast iron. The leadscrew is protected from above against contamination and chips. The rotary base can be disassembled if required. When replacing the jaw inserts, the working surfaces contacting the vise must be machined in order to achieve the accuracy parameters specified in the technical documentation.