Šiaurės Klimato Hall Šildymo pirkti naudotą (2 132)

Sąlyga: labai geros būklės (naudotas), Weiss Model: WK-600/70 (I)-(II) 2 G EEx /22605147 Weiss Climate Chamber, Water-Cooled (Test Chamber Explosion-Proof) INERTING WITH NITROGEN / EXPLOSION-PROOF TEST CHAMBER Technical Data: Test Chamber Designation: WK-600/70 (I)-(II) 2 G EEx External dimensions with hinges and door lock: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door lock: Height 1995 mm, Width 1000 mm, Depth 1660 mm Test chamber volume: approx. 600 liters Cooling / Heating Operation: -70 to +180°C Climate Operation: 10 – 95°C Humidity: 10...98 % rH Temperature Change Rate: Cooling approx. 2.5 K/min Heating approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Rated power: 14 kW Rated current: 25 A Required fuse (on site): 32 A slow-blow Permissible test specimen weight: Total load of grates: 80 kg Test chamber floor: 80 kg, insert grate: 40 kg Weight: 800 kg Refrigerant: R 404A/R 23 (The evaporator of the air conditioning unit was replaced) Important safety information for you as buyer: The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful inspection, chambers are subjected to documented test runs. Condition: used / gebraucht Scope of delivery: (see picture) (Specifications and technical details subject to change and errors!) Gtodpfxov Ewy Hj Abdjt For further questions, please feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), Feutron Gtedpok E Hnqjfx Abdjt Model: 3702/06 Water-cooled Climate Test Chamber Technical Data: Nominal test chamber volume: 2.0 m³ Dimensions: Test chamber exterior, including humidification console Width: 2970 mm, Height: 2370 mm, Depth: 1530 mm Rear wall Minimum installation opening: Width 2970 mm, Height 2390 mm, Depth 1550 mm Test chamber internal dimensions: Width 2000 mm, Height 1000 mm, Depth 1000 mm Door: Double-leaf, clear opening width: 2000 mm, height: 1000 mm Viewing windows (heated), 2 pieces, width: 500 mm, height: 600 mm Cable port, 1 piece, left side wall, diameter 75 mm Temperature range: -40...100°C Climate range: 10...95°C Temperature variation over time: ≤ ±0.5...±1.0 ΔN/K Change rates measured in supply air without load: Cooling: up to 2.0 average K/min Heating: up to 2.0 average K/min Humidity range: 10...95 % relative humidity Humidity variation over time: ≤ ±3.0 % r.H. Dew point range, temporarily: -5...95°C Cooling unit: water-cooled semi-hermetic Bitzer system Refrigerant: R507 (M-K1) Climate and dryer refrigeration unit: air-cooled / hermetic system Refrigerant: R134a (M.KK) Power Supply: Electrical connection: 400V 3/N/PE AC, 50Hz Plug: CEE 5-pin, 32A, with 5.0 m cable Max. simultaneous power requirement: 10.0 kW Circuit breaker: 3 x 25 A, type C Protection class: IP20 Weight: 1300 kg Condition: used Scope of delivery: (see picture) (Modifications and errors in the technical data and specifications excepted!) For further questions, feel free to contact us by phone.

Gamybos metai: 2018, Sąlyga: labai geros būklės (naudotas), EFD Model: MINAC 6/10 SM Heat Treatment The compact design of the Minac induction heating unit allows for easy installation and offers rapid, focused, and controlled heating with full repeatability. Medium Frequency Product Line Technical Specifications: Maximum output power: 10 kW Continuous output power: 6 kW Mains voltage: 400-480 V Frequency range: 10-25 kHz Output power adjustment range: 2-100% Recommended fuse: 16 A Cooling water: approx. 4 l/min Cooling water supply temperature min./max.: 18 - 35°C Cooling water pressure min./max.: 4 - 6 bar Weight: approx. 50 kg Dimensions (W x D x H): 345 x 708 x 453 mm Year of manufacture: 2018 Gtedst Din Aspfx Abdot Optris CTlaser Infrared Thermometer Model designation: 3ML Measuring range: 50 to 400°C Spectral sensitivity: 2.3 µm Typical application: Metals at low object temperatures (from 50°C) Temperature controller ECU 1214C Hyfra eChilly Water Chiller 4-S Cooling capacity: 4395 W The unit comes from a laboratory environment with only a few operating hours. Condition: used Scope of delivery: (See image) (Specifications and technical data subject to change and error!) For further questions, we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), Vötsch Model: VC³ 0100 Vötsch Climate Test Chamber, Air-Cooled Test chamber dimensions: Height 950 mm x Width 1100 mm x Depth 950 mm Unit dimensions: Height 2000 mm x Width 1300 mm x Depth 1916 mm Test chamber volume: 990 liters Temperature testing: Minimum temperature: -0°C Maximum temperature: +90°C Gsdpfxetz T D Ae Abdott Temperature change rate cooling: 0.2 K/min Temperature change rate heating: 0.5 K/min Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature homogeneity: ± 0.5 to ± 1.0 K Heat compensation at +20°C: 350 W Climatic tests: Minimum temperature: +10°C Maximum temperature: +90°C Dew point temperature range: +4°C to +89.5°C Humidity range: 10 to 98% RH Temporal humidity deviation: ± 1 to ± 3% RH Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature homogeneity: ± 0.5 to ± 1.0 K Power supply: 1/N/PE AC 230V±10% 50Hz Rated power: 2.3 kW Rated current: 10 A Refrigerant: R-404A Weight: approx. 1400 kg Important information for you as the buyer for your peace of mind! The following procedures are carried out on our test chambers prior to sale: 1. Functional check and replacement of necessary components 2. New charging with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data and specifications subject to change and errors!) For further questions, we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), Vötsch Type: VC 7018 Vötsch Climate Test Chamber VC 7018 Water-Cooled Control Unit: "Touch Panel" All control and operation commands can be executed by simply touching the function icons on the "Touch Panel" control unit. Leveling Feet To compensate for uneven floors and to ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Feedthroughs The test chamber is equipped with feedthroughs on both the right and left sides. These allow measuring cables and test devices to be routed into the test chamber. Standard feedthroughs installed: R1: nominal width 125 mm L1: nominal width 50 mm Test Chamber Dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Godpfxewgayks Abdett Housing Dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Specifications for Temperature Testing: Temperature Range: -70°C to +180°C time-related ±0.1 to ±0.5 K spatial ±0.5 to ±2.0 K Temperature Change Rate according to IEC 60068-3-5 Heating: 4 K/min Cooling: 2.3 K/min Specifications for Climatic Testing: Temperature Range: -10°C to +95°C Humidity Range: 10% to 98% r.h. Temperature deviation over time in center of usable space ±0.1 to ±0.3 K Temperature deviation spatially ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity deviation over time in center of usable space ±1 to ±3 % r.h. Electrical Connection: Rated voltage: 3/N/PE AC 400V ±10 50Hz Rated power: 5.9 kW Rated current: 12.0 A Connection cable: 3.5 m Protection: 16 A slow-blow, to be installed on site Refrigerants: R-404A and R-23 Test chamber volume: approx. 190 liters Weight: approx. 460 kg net For your safety as a buyer, please note the following information! The following steps are completed on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Specifications and technical data subject to changes and errors!) For further questions we are happy to assist you by phone.

Sąlyga: naudotas, Keysight / Scienlab Battery Test System SL1001A + Angelantoni Climate Chamber DM500 C 10 ESS SPEEDY BT SP Complete Battery Testing System – For Laboratory Use incl. PC, Software & Technical Documentation For sale is a professional battery test system consisting of: - Keysight / Scienlab SL1001A Battery Test System - Angelantoni DM500 C 10 ESS SPEEDY BT SP Climate Chamber - Monitoring/Sampling Unit - Control PC with original software - Technical documentation The system is fully functional, well-maintained, and ideal for battery module testing, research, development, and quality assurance. Technical Specifications – Scienlab SL1001A: Feature / Description Manufacturer: Keysight / Scienlab Model: SL1001A Year: 2020 Voltage / Current / Power: 80 V / 600 A / 24 kW Dimensions (L×W×H): approx. 1.6 × 0.9 × 3.3 m Weight: approx. 700 kg Function: Charging, discharging, and cycling of battery modules Condition: Very well-maintained, lab use Technical Specifications – Angelantoni DM500 C 10 ESS SPEEDY BT SP: Feature / Description Manufacturer: Angelantoni Industrie S.r.l., Italy Model: DM500 C 10 ESS SPEEDY BT SP Year: 2019 Weight: approx. 1,225 kg Temperature range: −70 °C … +180 °C Humidity range: 10 … 98% rH Refrigerants: R449A + R23 Pressure ranges (PS Hi/Lo): 28 bar / 8 bar Wi-Fi integrated CE marking present Internal dimensions (L×W×H): approx. 1.6 × 2.3 × 3.3 m Function: Temperature and humidity testing, ESS (Environmental Stress Screening) Power supply: 3PH + N + PE, 400 V ±10 %, 50 Hz, full load 54 A Max. power consumption: 32.5 kW Monitoring/Sampling Unit Dimensions: 0.6 × 0.5 × 0.2 m Measured variables: cell voltages, current, temperature Interfaces: CAN, Ethernet Compatible with Scienlab / Keysight PathWave Software Gjdpfsxuqk Hjx Abdett PC + Software + Documentation Industrial PC with control and measurement software Enables automated test sequences, logging, and data analysis Overall Dimensions / Weight (approx.): Component Dimensions (L×W×H) Weight Scienlab SL1001A 1.6 × 0.9 × 3.3 m 700 kg Angelantoni Climate Chamber 1.6 × 2.3 × 3.3 m 1,225 kg Monitoring / PC 0.6 × 0.5 × 0.2 m 50 kg Total System approx. L 3.2 m × W 2.5 m × H 3.3 m approx. 1,975 kg Applications: - Development, testing, and lifecycle evaluation of battery modules (e.g., Li-Ion, LFP, NMC) - Rapid charging and cycle tests - Environmental simulation of temperature and humidity - Research, industrial, and university laboratories Important Note: "The bench shown in the photos is not included in the sale." Scope of Delivery - Scienlab SL1001A power unit - Angelantoni DM500 C 10 ESS SPEEDY BT SP climate chamber - Monitoring / Sampling unit - Control PC with software - Technical documentation and manuals - Connection cables and accessories (as available) Condition: used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) For further questions, we will be happy to assist you by phone.

Sąlyga: geras (naudotas), Weiss Type: WK1-1000/70 Weiss Climate Test Chamber, Water-Cooled Gtsdpfervx Ezsx Abdst (Refrigerant converted to R-452A) Control Unit: “Touchpanel” All control and operation commands can be executed simply by touching the function icons on the touch panel. Feedthroughs The test chamber is equipped with feedthroughs on both the right and left sides. These feedthroughs allow measurement lines and test devices to be routed into the test chamber space. Feedthroughs: 1 feedthrough ∅ 125 mm installed on the right 1 feedthrough ∅ 50 mm installed on the left Volume: 990 liters Test Chamber Interior Dimensions: Test chamber: Width 1100 mm, Depth 950 mm, Height 950 mm Housing: Width 1385 mm, Depth 1850 mm, Height 1980 mm Data for temperature testing: Minimum temperature: –70 °C Maximum temperature: +180 °C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature homogeneity: ± 0.5 to ± 2 K Temperature change rate (heating): 4 K/min Temperature change rate (cooling): 2.5 K/min Max. heat compensation: 2750 W Data for climate testing: Temperature range: +10°C to +95°C Humidity range: 10 to 98% r.h. Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature homogeneity: ± 0.5 to ± 1 K Temporal humidity deviation: ± 1 to ± 3% r.h. Operation data: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 29A Rated power: 19.8 kW Refrigerants: R-452A / R23 Weight: approx. 910 kg Important information for your safety as a buyer! The following checks and preparations are carried out in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. If necessary, replenishment with legally compliant refrigerants 3. Leak test with certificate 4. After a successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to technical changes and errors in the listed data!) If you have any further questions, we will be happy to answer them by phone.

Sąlyga: labai geros būklės (naudotas), CTS Test Cabinet / Climate Chamber We are offering a CTS climate chamber for sale. Air-cooled Test chamber volume: 200 liters Internal chamber dimensions: height 750 mm, width 650 mm, depth 400 mm External dimensions: height 1800 mm, width 920 mm, depth 1345 mm Temperature operating range Temperature range: -40°C to +180°C Cooling rate: 4 K/min Heating rate: 4 K/min Maximum heat input at +20°C: 3500 W Temperature stability (temporal): ≤± 0.3 K Climate operating range Temperature range: +10°C to +95°C Humidity range: +10% to +98% RH Connection: 400 V +6% -10%, 3/N, 50 Hz Rated current: 9.4 A Rated power: 4.8 kW Weight: approx. 450 kg Refrigerant: R404A Model: CTS C-40/200 Godpfx Abshwhzwedstt The following points are performed on the chambers we offer in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored with calibrated instruments. Condition: used Scope of delivery: (see photo) (Technical data and information may be subject to change and error!) If you have further questions, feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), RS Simulators Here we offer a climate test chamber. Water-cooled 300 liters Temperature range from -75°C to +180°C Temporal deviation: ±0.2 K to ±0.8 K Average heating rate: approx. 2.1 K/min Average cooling rate: approx. 1.2 K/min Humidity range: 10% to 98% relative humidity Gtedpoiivgvofx Abdst Operating climate range: Temperature: 10°C to 95°C Humidity: 25% to 75% relative humidity Dimensions: Width 1000 mm, Height 1800 mm, Depth 1400 mm Voltage: 3x400V/N/PE, Current: 40A Refrigerant: R404a / R23 Type: KS 300 / 75 Weight: 630 kg For your safety as a buyer, please note the following information: The following steps are performed on all chambers offered by us: 1. Functional test and replacement of necessary components 2. New filling with compliant refrigerant according to legal requirements 3. After successful inspection, the chambers undergo a test run monitored with calibrated instruments. Condition: used Scope of delivery: (see pictures) (Specifications and technical data subject to change and error!) If you have further questions, please feel free to contact us by phone.

Gamybos metai: 2020, Sąlyga: labai geros būklės (naudotas), Weiss Model: C/800/55a/25/S Year of manufacture: 2020 Weiss ClimeEvent Climate Test Chamber, water-cooled Chamber volume: 800 liters Internal dimensions: Height 950 mm, Width 1100 mm, Depth 800 mm External dimensions: Height 2015 mm, Width 1415 mm, Depth 3156 mm Floor loading: Designed for a maximum payload of 250 kg Key data for temperature testing: Temperature range: -55 to +180°C Temporal temperature fluctuation at center of usable space: ±0.1 to ±0.5 K Spatial temperature deviation (temperature gradient): 0.5 to 2.0 K Heating: 25 K/min Cooling: 25 K/min (down to -45°C) Heat compensation: max. 8000 W Key data for climate testing: Temperature range: +10 to +95°C Humidity range: 10 to 98 % RH (relative humidity) Climate performance data (excerpt) Gsdjw R Rt Iepfx Abdott Humidity range: 10 to 98 % RH Humidity deviation (over time): At the center of usable space, in steady state, depending on the set point: ±1 to ±3 % RH Temperature deviation (over time): At the center of usable space, in steady state, depending on temperature: ±0.1 to ±0.3 K Temperature homogeneity (spatial): Referring to the set value (for ranges > 20 % RH): ±0.5 to ±1 K Operating data: LED strip 24 V, 6.8 W / 2 x halogen lamp 24 V, 50 W Rated voltage: 3/N / PE AC 400 V ±10% 50 Hz Rated power: 53 kW Rated current: 87 A Refrigerant: WT69-R449A The chamber is equipped with a Greenmode Weight: approx. 2050 kg For your safety as a buyer, the following information: The following points are performed on all our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data. All details are without guarantee!) For further questions, we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), Weiss Tipas: SC/KWT 450 Druskos purškimo kamera Techniniai duomenys: Bandymo kamera: 450 litrų Maksimali apkrova: 100 kg Druskos tirpalo talpa: 180 litrų Išoriniai matmenys: aukštis 920 mm, plotis 1930 mm, gylis 800 mm Bandymo kameros matmenys: aukštis 740 mm, plotis 850 mm, gylis 570 mm Naudojimo sritys: Korozijos bandymai: Druskos purškimo testas: kambario temp. iki +50°C Kondensato vandens testas: kambario temp. iki +45°C Drėkintuvas +75°C Temperatūros pastovumas Laikinis temperatūros nuokrypis ±K. Įtampa: 1/N/PE AC 230V ±10% 50Hz Nominali galia: 2,0 kW; nominali srovė: 8,7 A Kombinacija: Druskos purškimo testas SS: DIN 50021 Kondensato vandens testas KFW: DIN 50017 Normali aplinka (vėdinimas): DIN 50014 Svoris: 180 kg Būklė: naudota Gjdew Strcjpfx Abdott Komplektacija: (žr. nuotrauką) (Techninių duomenų pakeitimai ir klaidos galimi, informacija nėra galutinė!) Dėl papildomos informacijos prašome kreiptis telefonu.

Sąlyga: naudotas, SNOL Model: SNOL 120/350 SNOL Heating and Drying Oven up to 350°C Description: SNOL High-Temperature Drying Oven 120/350 For industrial applications. Max. 350°C Internal volume: 120 liters Internal dimensions: 555x350x555 mm 400 Volt, 50 Hz, 6 kW Vertical air circulation by built-in fan Overtemperature protection Stainless steel chamber Gjdpfjvyfzzox Abdott Right-hand door hinge, includes two shelves Low energy consumption Fast heat-up and cool-down times Powder-coated housing RAL 7035 Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data; details may vary!) If you have any further questions, we would be happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), Espec Model: PSL-4KPH Espec Temperature and Climate Test Chamber, Air-Cooled There is a small dent on the upper edge of the door (see photo). The door closes perfectly, the seal is intact, and the climate chamber functions correctly with no technical faults. The dent is purely cosmetic and has no effect on function, sealing, or control accuracy. Temperature range: -70°C to +150°C Humidity range: 20 to 98% RH Temperature/humidity variation: ±0.3°C / ±2.5% RH Temperature/humidity stability: ±0.5°C / ±3% RH Heating/Cooling Rates & Times: Heating rate: 5.0 °C/min Cooling rate: 3.0 °C/min Test chamber dimensions (W x H x D): 1000 mm x 1000 mm x 800 mm External dimensions (W x H x D): 1410 mm x 1983 mm x 1593 mm Feedthrough with silicone stopper: 100 mm Gtjdpswz Er Ujfx Abdst Equipped with RS232 interface Test chamber volume: 800 liters Refrigerants: R-404A, R-508A Stainless steel construction, AC 400 V 3-phase, 50Hz, 31 A Net weight approx. 720 kg For your security as the buyer, the following information: The following points are completed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerants 3. After successful inspection, the chambers undergo a test run monitored with calibrated instruments. Condition: used Scope of delivery: (see photo) (Technical data subject to change and possible errors!) For any further questions, please feel free to contact us by phone.

Sąlyga: naudotas, Weiss Type: WK1/1500/40 Weiss climate test chamber, air-cooled with humidity control (converted to R-452a refrigerant) Temperature range: -40°C to +180°C Cooling rate approx. 2.5 K/min, heating rate approx. 3.5 K/min Temporal temperature deviation at chamber center: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 2.0 K Temperature range: +10°C to +95°C Humidity range: 10% to 98% RH Temporal temperature deviation at chamber center: ± 0.1 to ± 0.3 K Spatial temperature deviation: ± 0.5 to ± 1.0 K Heat compensation: Gtsdpfxsw Hctts Abdst in the range from +25 °C to +95°C at up to 90% relative humidity – 500 W Test chamber dimensions: Height: 950 mm, Width: 1100 mm, Depth: 1475 mm External dimensions: Height: 2005 mm, Width: 1300 mm, Depth: 2450 mm Test chamber volume: approx. 1540 liters Test chamber lighting: Halogen bulb 12V, 50W Rated voltage: 3/NPEAC 400V ±10% 50Hz Rated power: 11.5 kW Rated current: 22.0 A Customer-supplied fuse: 32A (slow-blow) Control cabinet and operating unit protection class: IP 54 Refrigerant: R-452a Weight: 920 kg Important safety information for buyers! The following points are completed in advance for all chambers we offer: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Condition: used Scope of delivery: (see image) (Subject to change and error regarding technical data!) For further questions, feel free to contact us by phone.

Gamybos metai: 2022, Sąlyga: labai geros būklės (naudotas), Dycometal Type: CCK -40/1500T Water-cooled climate chamber Volume: 1500 liters Internal dimensions: Height 1000 mm, Width 1000 mm, Depth 1500 mm External dimensions: Height 2200 mm, Width 1293 mm, Depth 3400 mm Thermal testing Minimum temperature: -40°C Maximum temperature: +150°C Cooling rate: 2.0 K/min Heating rate: 3.5 K/min Temperature stability: ±0.1°C to ±0.3°C Temperature uniformity: ±0.5°C to ±1.5°C Climatic test temperature range: +10°C to +90°C Humidity range: 10% to 98% RH Dew point range: +6.5°C to +86°C Humidity stability: ±1% RH to ±3% RH Gsdpeu N Uugjfx Abdott Condenser: water-cooled Rated voltage: 400 V 3N~PE 50 Hz Power: 16.1 kW 27.5 A Refrigerant: R-452A Weight: 1120 kg Condition: used Scope of delivery: (see picture) (Subject to change and errors in technical data and specifications!) For further questions, please feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), CTS Type: C-40/60 CTS Compact Climate Chamber, Air-cooled Test volume: 60 litres Temperature range: -40 °C / +180 °C Humidity range: 10% to 98% relative humidity +10 °C to +90 °C within temperature range +5 °C to +89.5 °C within dew point range Dimensions (W x D x H): Internal: 400 mm x 345 mm x 425 mm Housing: 560 mm x 845 mm x 1575 mm Gtjdpju Hlb Ejfx Abdjt Refrigerant: R-404A Rated voltage: 230V 1/N 50 Hz Power: 3.3 kW Rated current: 13 A For your safety as a buyer, please note the following information! The following procedures are carried out on our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Changes and errors in technical data reserved!) For further questions, we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), Weiss Type: WK 27'/50-150 Climatic Test Chamber Water-cooled Technical Data: Test chamber designation: WK 27'/50-150 External dimensions: Height: 3500 mm, Width: 3400 mm, Depth: 6000 mm Control cabinet dimensions: Height: 2000 mm, Width: 2400 mm, Depth: 400 mm Internal dimensions: Height: 3000 mm, Width: 3000 mm, Depth: 3000 mm Floor load: 30,000 N/m² (surface load) Test chamber volume: approx. 27,000 litres Specimen mass: 1,000 kg Cooling / Heating operation: Gtsdevx Nfbspfx Abdot -50°C to +150°C Heating rate: 1.0 K/min Cooling rate: 1.0 K/min Temperature constancy: ± 0.3 to 1.0 K (over time) Temperature stability: ± 0.1 to 0.5 K (over time) Climatic operation: 10 – 90°C Humidity: 10...98 % r.h. Temperature constancy: ± 0.1 to 0.5 K (over time) Dew point range: +4 to +84°C 3/N / PE AC 400 V ±10% 50 Hz Weight: 7,000 kg Refrigerants: R23 and R404A Supplied with additional floor plates to increase load capacity Important information for your safety as a buyer! The following measures are carried out in advance on our offered chambers: 1. Functionality check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful testing, the chambers are subjected to a trial run, monitored with calibrated instruments. Condition: used Scope of delivery: (see image) (Subject to technical changes and errors! All information is non-binding!) Should you have any further questions, we will be happy to answer them by phone.

Sąlyga: labai geros būklės (naudotas), CTS Climate Chamber / Climatic Test Cell Here we offer a CTS climate chamber / climatic test cell. Available from mid-January 2023! Water-cooled Height adjustable! Footprint approx. (W x D x H): 3755 x 3470 x 2480 mm Test space approx. (W x D x H): 2500 x 2720 x 2200 mm Test chamber volume: approx. 15 m³ Temperature range: -40°C to +140°C Temperature deviation: 1 K over time Average temperature change rate without radiant heat, measured at supply air: Heating: 2 K/min Cooling: 1 K/min from +110°C to -35°C Climatic tests: Temperature range: +10°C to +90°C Humidity range: +30% to +95% RH Dew point range: +5°C to 89°C Temperature deviation: 0.5 K over time Humidity deviation: ±1–±3% RH over time Rated voltage: 400V 3/N, PE, 50 Hz Rated power: 53.5 kW Rated current: 92.3 A Compressor: S6J-16.2 + Chiller unit Refrigerant: R404A Gtjdoip Dp Sepfx Abdst Weight: 5500 kg Type: CW-40/16 Condition: used Scope of delivery: (see picture) (Subject to technical modifications and errors in the data!) For further questions, please contact us by phone.

Sąlyga: labai geros būklės (naudotas), Here we offer a Weiss climate test chamber. Weiss Climate Test Chamber, Water-cooled (Refrigerant converted to R-452A) Gtsdpfx Absq U Sdcedet Temperature testing Volume: 335 liters Test chamber dimensions: Internal dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Minimum temperature: –42°C Maximum temperature: +180°C Temperature change rate, cooling: 4 K/min Temperature change rate, heating: 3.2 K/min Temperature deviation, temporal: ± 0.1 to ± 0.5 K Temperature uniformity, spatial: ± 0.5 to ± 1.5 K Climatic testing: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% RH Temperature deviation, temporal: ± 0.1 to ± 0.3 K Temperature uniformity, spatial: ± 0.5 to ± 1 K Humidity deviation, temporal: ± 1 to ± 3% RH Voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 4.1 kW Rated current: 14 A Refrigerant: R-452A Type: WK3-340/40 Weight: approx. 515 kg Important safety notice for buyers! The following services are carried out on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Specifications and technical details subject to change or error!) If you have any further questions, we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), We are offering a climate test chamber for sale. Water-cooled Test chamber volume: 350 liters Interior dimensions: Height 750 mm, Width 650 mm, Depth 720 mm External dimensions: Height 1800 mm, Width 850 mm, Depth 1640 mm Temperature operating range: Temperature range: -70°C to +180°C Cooling rate: 3.0 K/min Heating rate: 5.0 K/min Climatic operating range: Temperature range: +10°C to +90°C Humidity range: +10% to 98% r.H. Dew point range: +5°C to 89.5°C Temperature deviation: ±0.1 - ±0.3 K over time Humidity deviation: ±1 - ±2% r.H. over time up to 90% r.H.; max. ±1 - 3% r.H. over time above 90% r.H. Electrical connection: 400V +6-10%, 3/N, 50Hz Connected load: 13 kW Rated current: 25.5 A Refrigerants: R404A / R23 Weight: 650 kg Model: CS-70/350 Important information for your peace of mind as a buyer! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant Gsdpfxoi Tw Uvs Abdstt 3. Leak test with certificate 4. After successful inspection, the chambers undergo a trial run monitored with calibrated equipment Condition: used Scope of delivery: (see picture) (Specifications are subject to change and errors excepted!) We are happy to answer further questions by phone.

Sąlyga: labai geros būklės (naudotas), GH Induction Type: 30 SMBC Transistor generator for inductive heating Gsdpfjb E I Utsx Abdett Medium frequency with series resonant circuit The SMBC generator series retains the traditional advantages of the Transithermic family of generators (high reliability, easy operation and high efficiency) in a series resonant circuit and a compact design, with integrated cooling inside the generator cabinet. Rittal generator cabinet and GH Induction TC150 / 2 resonant circuit Voltage: 400V Frequency: 50 Hz Current: 56 A Power: 37.5 KVA Like new condition! Scope of delivery: Transistor generator, Rittal generator cabinet with cooling, and TC150 / 2 resonant circuit (Specifications subject to technical changes and errors!) If you have any further questions, we are happy to answer them by phone.

Sąlyga: labai geros būklės (naudotas), Weiss Model: WK3-600/70 Climatic Test Chamber, Water-Cooled Data for Temperature Testing: Temperature range: -70°C to +180°C Temperature change rate: Heating: 4.0 K/min Cooling: 2.5 K/min Temperature deviation: Over time: ±0.1 to ±0.5 K Spatial: ±0.5 to ±1.5 K Max. heat compensation: 2500 W Data for Climate Testing: Temperature range: +10 to +95 °C Dew point temperature range: -3 to +94°C Humidity range: 10 to 98 % RH Temperature deviation (over time): ±0.1 to ±0.3 K Temperature deviation (spatial): ±0.5 to ±1 K Humidity deviation (over time): ±1 to ±3 % RH Temperature uniformity (spatial): ±0.5 to ±1.0 K Max. heat compensation: 500 W Test Chamber Volume: 600 liters Test Chamber Internal Dimensions: Height 950 mm, Width 800 mm, Depth 800 mm External Dimensions: Height 1998 mm, Width 1000 mm, Depth 1745 mm Feedthroughs: Diameter NW 125 mm and NW 50 mm Operating Data: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 9.1 kW Rated current: 19.0 A Refrigerants: R 452A & R23 Weight: 680 kg Important Information for Buyer Safety: The following procedures are carried out in advance on our offered chambers: 1. Functional inspection and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Subject to change and errors in technical data!) Gedpfx Aew Nqhpsbdett Please feel free to contact us by phone for further questions.

Sąlyga: labai geros būklės (naudotas), Espec Model: EGNX28-6CWL Espec Climate Test Chamber Water-Cooled Climate Test Chamber N Series Temperature range: -70 to +180°C Temperature change rate: Heating: 10 K/min Cooling: 5.5 K/min Humidity range: 10 to 95% RH according to chart Internal dimensions (W x H x D in mm): 1000 x 1000 x 800 External dimensions (W x H x D in mm): 1205 x 1930 x 1960 Usable volume: 800 liters Cooling capacity: 3.6 kW at -50°C Heating system: 10 kW Refrigerant: R-404A Refrigerant: R-508A Power supply: Gtjdjv Duuxepfx Abdjt AC 400 V 3-phase 50/60Hz 38A Weight: approx. 695 kg For your safety as a buyer, please note the following information! The following checks are carried out on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), CTS Climate Test Chamber Type: C -40/600 Air-Cooled (converted to R-452A refrigerant) Test chamber volume: 600 liters Temperature testing: Gsdpsw U Awmjfx Abdett - Temperature range: -40°C to +180°C - Temperature deviation: ±0.1 K / ±0.3 K (over time, in steady-state conditions) - Average temperature change rate (without test specimen and without radiant heat): Heating: 2.5 K/min Cooling: 3.0 K/min - Radiant heat max. 2500 W at +20°C Climate testing: Climate range / Technical data: - Temperature range: +10°C to +95°C - Humidity range: 10% r.h. to 98% r.h. - Dew point range I: +7°C to +94°C - Dew point range II: –10°C to +7°C - Consistency values (over time): Humidity consistency I: ±0.5% r.h. to ±1.5% r.h. Humidity consistency II: ±1% r.h. to ±3% r.h. Temperature consistency: ±0.1 K to ±0.3 K Test chamber internal dimensions (approx.): Height 850 mm, Width 850 mm, Depth 830 mm External dimensions (approx.): Height 1900 mm, Width 1115 mm, Depth 1850 mm Refrigerant: R-452A Electrical connection: 400V 3/N 50Hz Connected load: 8.2 kW, Rated current: 11.9 A Weight: 550 kg Important information for buyers! For your safety, the following procedures are carried out in advance on our chambers on offer: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See picture) (Subject to change and errors in technical data and specifications!) For further questions, please feel free to contact us by phone.

Sąlyga: naudotas, Weiss Type: WK111-600 Weiss Climate Test Chamber, Air-Cooled Specifications for Temperature Tests: Temperature Range: -5°C to +90°C Temporal Temperature Fluctuation: ± 0.1 to ± 0.5 K Spatial Temperature Deviation: ± 0.5 to ± 1 K (Equivalent to Temperature Gradient): 1 to 2 K Rate of Temperature Change: Heating: 0.5 K/min Cooling: 0.2 K/min Specifications for Climatic Testing: Temperature Range: +10°C to +90°C Humidity Range: 10% to 98% rH Temporal Temperature Fluctuation: ± 0.1 to ± 0.3 K Spatial Temperature Deviation: ± 0.5 to ± 1 K (Equivalent to Temperature Gradient): 1 to 2 K Temporal Humidity Fluctuation: ± 1 to ± 3 % Test Chamber Dimensions: Width 800 mm x Depth 800 mm x Height 950 mm Housing Dimensions: Width 1000 mm x Depth 1660 mm x Height 1975 mm Feed-throughs: - 1 feed-through Ø 50 mm installed on the left side - 1 feed-through Ø 125 mm installed on the right side Power Supply: 1/N/PE AC 230V ±10% 50Hz Nominal Power: 2.3 kW Rated Current: 10.0 A Refrigerant: R 404A Capacity: 600 liters Weight: 540 kg Gtedsxu I D Djpfx Abdst For your safety as a buyer, please note the following information! The following points are carried out on the chambers we offer prior to sale: 1. Functional test and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See photo) (Specifications and technical details subject to change and error!) We are happy to answer any further questions you may have by phone.