Apvaliosios šlifavimo staklės nuo 2100 mm šlifavimo ilgio pirkti naudotą (26)

Sąlyga: naudotas, Gamybos metai: 1973, Additional flanges and a spindle for internal grinding are included with the machine. The Jones was completely disassembled and inspected; it works flawlessly. The price is for one machine. Hedpew Dvwajfx Acuofn

Sąlyga: geras (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, šlifavimo ilgis: 4 000 mm, Main Technical Features Technical / Dimensional Data Max. swing diameter over bed: 900 mm Max. grinding diameter (with new wheel): 820 mm Max. grinding length: 4,000 mm Max. static workpiece weight on steadies: 3,000 kg Max. workpiece weight in chuck: 300 kg (max. overhang 250 mm from spindle nose) Hfsdpfx Acexni Sieusn External grinding wheel dimensions (Ø × width × bore): 915 × 100 × 305 mm Peripheral speed of grinding wheel: 45–60 m/s Plunge grinding feed rate – roughing: 0.5–50 mm/min Plunge grinding feed rate – fine: 0.001–0.01 mm/min Longitudinal grinding feed rate – roughing: 0.01–0.05 mm/min Longitudinal grinding feed rate – fine: 0.001–0.01 mm/min Machine length: 9,200 mm Machine width: 3,800 mm Machine height: 2,630 mm Total weight (approx.): 25,800 kg Max. noise level with running motors: 80 dB Workhead Center angle: 60° Quill taper: Morse 6 Spindle connection: ASA 6 Spindle motor power (S1): 22 kW Speed range: 3–250 rpm Electric Tailstock Center angle: 60° Quill taper: Morse 6 Total quill stroke (stroke + center eject): 78 + 15 mm Force measuring cell (max. display value): 10,000 kg Quill adjustment motor: 6.1 Nm Longitudinal tailstock body movement motor: 0.18 kW Grinding Wheel Dimensions Outer diameter: 915 mm Width: 100 mm Bore: 305 mm Max. wheel width: 130 mm Min. admissible wheel diameter (worn wheel): 630 mm Grinding Slide / Feed Axes Peripheral speed of grinding wheel: 45–60 m/s Max. grinding spindle speed: 2,000 rpm Grinding spindle drive (brushless AC): 37 kW Cross axis X – servo motor (brushless): 7 Nm Cross axis X – manual rapid traverse: 7,000 mm/min Cross axis X – automatic rapid traverse: 10,000 mm/min Cross axis X – travel: 510 mm Longitudinal axis Z – servo motor (brushless): 14.7 Nm Longitudinal axis Z – manual rapid traverse: 7,000 mm/min Longitudinal axis Z – automatic rapid traverse: 15,000 mm/min Longitudinal axis Z – travel: 4,300 mm Auxiliary Slide Z2 (taper grinding) – servo motor: 7 Nm Z2 – manual/automatic rapid traverse: 7,000 mm/min Z2 – travel: 360 mm Grinding head swivel B-axis: ±7° B-axis fast swivel speed manual: 0.3 mm/rev B-axis fast swivel speed automatic: 0.4 mm/rev B-axis drive (brushless, with gearbox): 2.15 Nm Standard Accessories CNC control Siemens Sinumerik 840D, PCU50, Windows XP Pro SP2 Safety device for gap control Marposs E82 Hydraulic unit for various machine functions Hydraulic unit for automatic lubrication Oil unit for hydrodynamically mounted grinding spindle Hydrodynamic grinding spindle Electric tailstock with force measuring cell and digital display of contact force 1 grinding wheel flange Ø 305 mm 2 dead centers with carbide, Morse 6, with extractor nut Balancing arbor for grinding wheel Tie bar and retaining bracket for machine anchoring Modem for remote access and CNC data transfer Service tool kit Geometry inspection protocol Hook for wheel change Glass linear scale on X-axis (additional backup encoder) Optical rotary encoder for B-axis angular positioning Optional Equipment (included in delivery) Increased center height 450 mm 1 additional grinding wheel flange Ø 305 mm Special grinding head for taper grinding in longitudinal mode

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, BSD Series — Universal External Cylindrical, Medium to Large Distance between centers: 700 / 1000 / 1600 / 2500 / 3000 mm. Center height: 175 / 225 / 275 / 400 mm. Max. workpiece weight: up to 500 kg. Max. grinding wheel diameter: Ø 750 mm. Turret grinding head with up to 4 spindles. Optional axes/functions: C-axis (workpiece rotation, thread/profile grinding). Control: PLC (NC) / CNC. Application: external cylindrical, face, taper, thread, profile grinding; can also be combined with ID grinding. BSE Series — Universal External Cylindrical, Large/Long Parts Distance between centers: 1500 / 3000 / 4000 mm. Center height: 315 / 400 mm. Max. workpiece weight: up to 2500 kg. Hedpfxexnmrtj Acujfn Max. grinding wheel diameter: Ø 900 mm. Turret grinding head with up to 4 spindles. Optional axes/functions: C / B / U / Q (including swiveling workpiece clamping, swiveling chuck). Control: PLC (NC) / CNC. Application: Ideal for single-clamping of complex external machining operations, ensuring high form accuracy. Core Technology (Both Series) Machine bed: cast iron, ribbed, naturally aged; flat/V-guides, hand-scraped, anti-friction coating. X/Z axis with ballscrew drives, AC servos, linear scales. Grinding head: Left/right/fixed angle; turret up to 4 spindles; automatic dynamic balancing from Ø 250 mm. Tailstock: hydraulically operated, adjustable force, conical deviation correction. W-axis optional. Internal grinding (optional): Belt or HF spindles, direct drive, water cooling. Control: PLC (NC) or CNC, graphical user interface, data output for process analysis. Options & Peripheral Equipment Dressing: CNC/manual; single-point, multi-point, diamond rolls/discs; Y-axis for roll profiling. Measuring & monitoring: in-process / post-process gauging, axial touch probe, gap/crash/dressing/position monitoring. Clamping & supports: Between centers, chucks, drivers, face drivers, power-operated workholding, steady rests (finely adjustable, self-centering). Grinding media: Ceramic, CBN, diamond. Automation: Integrated gantry or robot loading possible. Financing Leasing/financing available: 24 months.

Sąlyga: geras (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: OE-70109, ruošinio svoris (maks.): 500 kg, šlifavimo ilgis: 2 500 mm, šlifavimo disko skersmuo: 760 mm, bendras plotis: 4 500 mm, bendras ilgis: 5 000 mm, bendras aukštis: 2 900 mm, veleno greitis (maks.): 2 200 aps./min, bendras svoris: 9 000 kg, ruošinio veleno greitis (maks.): 500 aps./min, valdiklių gamintojas: FANUC, valdiklio modelis: SERIES OI-TF, spaudos ilgis: 2 600 mm, šlifavimo disko skylė: 304 mm, veleno tvirtinimas: MK 6, Griebtuvėlio eigos ilgis: 60 mm, ruošinio skersmuo (maks.): 850 mm, TECHNINIAI DUOMENYS IR ĮRANGA: Darbinė įtampa: 400 V Dažnis: 50 Hz Hfsdpsxm Tvcefx Acusn Nominali srovė: 3 x 100 A Jungtis: 63 kVA Šlifavimo veleno blokas: X ašies pastūma Z ašies pastūma Šlifavimo rato periferinis greitis: 45 m/s Įskaitant XACTOOLS gamintojo robotų celę su pakrovimo įrenginiu ir vibracinėmis talpomis, taip pat EPSON gamintojo pramoninį robotą, maks. keliamoji galia: 8 kg Įskaitant dokumentaciją PASTABOS DĖL ATSIĖMIMO: Atsiėmimas turi būti privalomai atliktas tarp gruodžio 10 ir 12 d. FCA Winterlingen, pakrauta ant sunkvežimio

Sąlyga: naudotas, Atsarginės ar aksesuarinės dalys SCHAUDT. Ilgą laiką sandėliuotos dalys; flanšai tikrai yra nuo SCHAUDT apvaliosios šlifavimo staklės. Visos kitos dalys galėtų priklausyti SCHAUDT, tačiau dėl to nėra jokių garantijų! Hfodsxdwxpspfx Acuon

Sąlyga: geras (naudotas), Gamybos metai: 1984, Usata rettificatrice universale cilindrica TOS KAMENICEK modello BUC63A x 3000. ANNO DI COSTRUZIONE: 1984. MACCHINA PRECEDENTEMENTE INSTALLATA PRESSO ROLLS ROYCE PLC A DERBY, REGNO UNITO. DISPONIBILE IMMEDIATAMENTE E ATTUALMENTE UBICATA IN BELGIO, DOVE PUÒ ESSERE ISPEZIONATA. SPECIFICHE TECNICHE Diametro massimo tornibile: 630 mm Distanza tra le punte: 3000 mm Inclinazione della testa porta pezzo – solo verso la mola: 90° Cono interno mandrino porta pezzo: No. 6 Morse Hodpoh U Rznsfx Acusfn Corsa cannotto contropunta: 70 mm Cono cannotto contropunta: No. 6 Morse Attacco naso mandrino: DIN 55021 Inclinazione testa porta mola: +30° / -10° Corsa regolazione vite a ricircolo di sfere: 290 mm Corsa di regolazione supplementare: 250 mm Corsa avanzamento rapido: 90 mm Avanzamento a mano per giro volantino (diametro lavoro): 0,5 mm Dimensioni mola (diametro x larghezza x foro): 750 x 80 x 305 mm Diametro minimo mola usurata: 570 mm Larghezza massima mola: 125 mm Velocità traslazione tavola (continua): 0,5-0,6 m/min Corsa traslazione tavola per 1 giro volantino: 8 mm Inclinazione tavola: ±5° Peso massimo ammesso tra le punte: 2500 kg Peso massimo ammesso su autocentrante con sporgenza (compreso autocentrante): 150 kg Velocità mandrino mola (2): 840, 970 giri/min Velocità periferica mola: 33 m/sec Velocità mandrino pezzo – variabile interna su 2 gamme: 8-50, 50-315 giri/min Potenza totale richiesta: 31 kVA Potenza motore testa porta pezzi: 3 kW Potenza motore testa mola, elettrici: 15 kW 415V, 3Ph, 50Hz Dotazioni: Flange addizionali, impianto di raffreddamento con chiarificatore e protezioni antischizzo. CARATTERISTICHE ED EQUIPAGGIAMENTO – Dispositivo interno di rettifica rotondo orientabile.

Sąlyga: labai geros būklės (naudotas), Centre height 300 mm Centre distance 3500 mm Grinding wheel 760 x 305 x 100 mm With digital readout Hfsdetpgnhspfx Acujn With MARPOSS measuring control Various accessories MARCELS MASCHINEN AG

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, Išorinė apvali šlifavimo staklė, pagaminta Vokietijoje iš masyvios konstrukcijos. Itin tiksli ir paruošta darbui. Ankstesnis savininkas – vokiečių mašinų gamintojas. 2008 m. atliktas kapitalinis remontas su pilnu RETROFIT: atnaujinta CNC valdymo sistema ir pavaros. Gamintojas: SCHMALTZ Modelis: R 5-3000 Pagaminimo metai: 1971 Didž. ruošinio skersmuo: 630 mm Didž. ruošinio ilgis: 3000 mm Šlifavimo disko skersmuo: 800 mm Šlifavimo variklio galia: 30 kW Šlifavimo disko sūkių dažnis: 500 / 1000 aps./min Ruošinio ašies sūkių dažnis: 12 – 150 aps./min Bendras svoris: 15 tonų Hfedpfx Acsxnhxzoujn Komplektacija ir priedai Atnaujinta ir modernizuota 2008 m. Pilnai sukomplektuota su: - EMAG šlifavimo disko profiliavimo įrenginiu su Siemens 840 D CNC valdymu - Heidenhain skaitmeniniu nuorodų indikatoriumi (DRO) - Marposs E9 matavimo bloku - 11 atraminių liemenėlių - Aušinimo skysčio talpykla su filtruojančia sistema

Sąlyga: labai geros būklės (naudotas), šlifavimo ilgis: 3 500 mm, plotis centre: 5 000 mm, Cylindrical grinding machine Hfjdpfx Acswb Dq Nsuen Manufacturer: Joh. Schehr Meuselwitz Model: SAXW 1000 Weight: 33 tons Center distance: 5000 mm Grinding length: 3.5 meters Concave and convex grinding directions Total length: 9.6 meters Width: 3 meters Height: 2.4 meters 380 volts Machine can be inspected under power at the seller’s facility.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1977, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 100 mm Grinding wheel diameter: 360 mm Total power requirement: kW Hfodpfount Eyjx Acuon Machine weight approx. 3.8 t Space requirements approx. 3.5 x 1.3 x 1.5 m Machine in very good condition! External and internal spindle. Extensive accessories included.

Sąlyga: naujas,

Sąlyga: geras (naudotas), Gamybos metai: 1981, Funkcionalumas: visiškai funkcionalus, ruošinio svoris (maks.): 10 000 kg, šlifavimo ilgis: 4 000 mm, šlifavimo disko skersmuo: 750 mm, bendras plotis: 4 180 mm, bendras ilgis: 13 440 mm, bendras aukštis: 2 455 mm, šlifavimo skersmuo: 800 mm, bendras svoris: 38 700 kg, Cylindrical Grinding Machine STANKO 3M196. Hedpfx Aet I Dppscusfn Year of manufacture: 1981. Maximum grinding diameter: 800 mm Maximum workpiece length: 4000 mm Grinding diameter range: 80 - 800 mm Maximum grinding diameter without steady rest: 800 mm Maximum grinding diameter in steady rest: 450 mm Centre height over table: 410 mm Maximum workpiece weight between centres: 10,000 kg Wheel dimensions: ⌀750 x 100 mm Grinding speed: 50 m/s Main motor power: 30 kW Workpiece rotational speed: 5 - 80 rpm Maximum tailstock quill stroke: 100 mm Overall machine dimensions (Length x Width x Height): 13,440 × 4,180 × 2,455 mm Machine weight: 38,700 kg

Sąlyga: geras (naudotas), Maks. skersmuo: 560 mm Hfedpfx Acov Dvzysuen Darbinis ilgis: 3550 mm Maks. ruošinio ilgis: 4000 mm

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Demonstracinis įrenginys BUB 63 CNC 3000 Hsdpjv N D Hbjfx Acuofn Centro aukštis: 630 mm Atstumas tarp centrų: 3000 mm 1 šlifavimo diskas: 500/380 x 100 x 203 mm

Sąlyga: naudotas, Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, centro aukštis alkūniniame velene: 1 100 mm, ruošinio svoris (maks.): 180 000 kg, šlifavimo ilgis: 11 000 mm, šlifavimo disko skersmuo: 1 066 mm, bendras ilgis: 11 700 mm, šilko eigos atstumas: 11 700 mm, ruošinio svoris tarp centrų: 180 000 g, atstumas tarp centrų: 11 700 mm, POMINI CNC Svarvsliprundmaskin Modell HD-425-2-7L Siemens 840D, 12 axlar. Tillverkningsår: 2006. Två plansängsystem – slip- och arbetsvägar är separerade. Maskinprecision: Rätlinjighet: 0,001–0,002 mm/m. Rundhet: 0,001–0,002 mm. Excentricitet: 0,002 mm. Profil för krönhöjd upp till 0,1 mm ±0,002 mm/m. Ytfinish utan vibrationer (”chatter marks”) och inga matningsspår efter finslipning. På separat bädd: Automatisk mätbygel (kaliper) diameter 870–2.250 mm. Virvelströmsprob för sprick- och slagdetektion. Ultraljudsprob för djup upp till 180 mm. Högtrycksrengöring av sliphjul. Automatisk eller manuell elektromagnetisk dynamisk balansering av sliphjul. Diamantutrustad dressningsanordning för sliphjul. 2 hydrostatiska följare (steadies). 2 hydrodynamiska följare (steadies). 4 mjuklandningsanordningar för valsar. Snabbväxlingsanordning för sliphjul inkl. motor. Saxkran (jib crane). Vibrationsmätning och -registrering på: Huvudspindelns bas Stödaxlar (neckrests) Fotspindel (footstock) Sliphållarens fram- och baksida Tvärslida (carriage) lateral sida Arbetskapacitet: Slipbredd: 11.000 mm Max diameter med 1066 mm sliphjul: 2.200 mm Min diameter med 1066 mm sliphjul: 800 mm Centrumavstånd: 11.700 mm Max vik balk/vals: 80 ton Max vik med stöd: 180 ton Hodpowdmy Sefx Acusfn Min avstånd sliphjulscentrum – valsaxel: 845 mm Max avstånd sliphjulscentrum – valsaxel: 1.635 mm Tvärslida (vagn) Ax Z, hydrostatisk: Matningar, steglöst: 0–6.000 mm/min Oljeskikttjocklek: 0,020 mm Avstånd mellan vagnens räler: 1.500 mm Rälbredd: 160 mm Vagnens totala längd på räler: 3.385 mm Sliphållare (wheelhead) på vagn Ax X, hjulprob Ax A, Inspektör Ax A1, Korsmatning via kulskruv (ballscrew) Ax X: 940 mm Upplösning Ax X: 0,0001 mm Sliphjulsspindelns längd: 1.695 mm Spindellager, hydrostatisk, diameter: 254 mm Upplösning matningshandratt Ax X: 0,00001 mm/indelning Kontinuerlig hjulmatning, U-axel (radie): 0–0,35 mm/min Snabbmatning hjul, Ax X: 0–830 mm/min Motoreffekt sliphjul, AC: 130 kW Sliphjulshastighet: 400–1.100–1.600 rpm Skärhastighet sliphjul: steglös Ythastighet vid hjuldödjare 1.066 mm: 45 m/s Ythastighet vid hjuldödjare 670 mm: 45 m/s Hjulhål, diameter: 508 mm Hjultjocklek: 76–152 mm Hjuldödjare: 670–1.066 mm Kröning, Ax U: Max krön på diameter: 10 mm Max konvexitet på diameter: 10 mm Huvudspindel: Arbetsstyckets rotationshastighet: 5–50 rpm Motor huvudspindel: 200 kW Max överförbart vridmoment: 76,5 kNm Planskiva styrsystem: V-remmar Max centrumdiameter, metrisk typ: 160 mm Axelrörelse (quill stroke): 150 mm Längd huvudspindel: 3.110 mm Motspindel (tail stock): Quill diameter: 260 mm Axelrörelse: 750 mm Max centrumdiameter, metrisk typ: 160 mm Kon (taper): metrisk 5 % av diameter Motspindelns längd: 1.300 mm Motspindelns slag: 8.000 mm Kaliper, armaxel C, vagnaxel V, rotationsaxel B: Max mätbar diameter: 2.250 mm Min mätbar diameter: 870 mm Maskinens mått: Maskinens vikt: 130 ton Längd: 19,5 m Bredd: 5,5 m Höjd: 3,2 m Plintdjup (grunddjup): 3,8 m.

Sąlyga: geras (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 10/2005/02, centro aukštis: 690 mm, ruošinio svoris (maks.): 10 000 kg, šlifavimo ilgis: 8 000 mm, šlifavimo disko skersmuo: 900 mm, bendras plotis: 3 500 mm, bendras ilgis: 15 100 mm, bendras aukštis: 2 000 mm, šlifavimo skersmuo: 550 mm, įvesties srovės tipas: trifazis, veleno greitis (maks.): 50 aps./min, veleno greitis (min.): 5 aps./min, šlifavimo veleno variklio galia: 2 200 W, šlifavimo veleno greitis: 920 aps./min, bendras svoris: 36 000 kg, įėjimo dažnis: 50 Hz, įėjimo įtampa: 400 V, Įranga: sūkių greitis be galo kintamas, External cylindrical grinding machine Manufacturer: Metex Control system: Siemens, Type Sinumerik 840 D Centre height / distance between centres: 690 x 8,000 mm Maximum grinding wheel diameter: 900 mm Coolant filtration system Tailstock with grinding wheel dresser Hydrodynamic grinding spindle Hfsdpfxswwrvre Acusn

Sąlyga: labai geros būklės (naudotas), Churchill Model D cilindrinė šlifavimo staklė, 635 mm (25") prošva virš lovos, 3000 mm (118") tarp centrų, 660 mm (26") disko skersmuo, pasukamas stalas, aušinimo skysčio bakas ir siurblys, 4 stabilizatoriai. Hodpfx Aow U Undocuefn

Sąlyga: naudotas, Gamybos metai: 1984, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 3M194 / 4000, centro aukštis: 325 mm, ruošinio svoris (maks.): 3 000 kg, šlifavimo ilgis: 4 000 mm, bendras plotis: 4 100 mm, bendras ilgis: 13 100 mm, bendras aukštis: 2 450 mm, šlifavimo skersmuo: 630 mm, ruošinio svoris tarp centrų: 1 500 g, ruošinio ilgis tarp centrų: 4 000 mm, bendras svoris: 32 750 kg, Cylindrical grinder 3M194 (630 x 4,000 mm) available for sale. - Maximum grinding length: 4,000 mm - Maximum swing over bed: 630 mm - Grinding diameter range: 40 – 560 mm - Voltage: 380 V / 50 Hz - Grinding wheel motor power: 43 kW - Total connected load: 60 kW - Maximum load between centres: 1,500 kg - Maximum load in chuck: 3,000 kg - Machine dimensions (L x W x H): 13,070 x 4,020 x 2,455 mm - Machine weight: 32,750 kg Hfsdpfx Aowir Thocuon

Sąlyga: naujas, Gamybos metai: 2025, centro aukštis: 315 425 mm, šlifavimo disko skersmuo: 750 mm, šlifavimo skersmuo: 630 850 mm, šlifavimo veleno greitis: 1 000 aps./min, bendras svoris: 17 000 kg, Main Technical Data: Swing Diameter: mm 630, 850 (optional) Distance Between Centers (with two new tables): mm 2000, 3000, 4000, 5000 Maximum Workpiece Weight Between Centers: kg 2,500 Maximum Workpiece Weight (chucked, including grinding wheel): kg [not specified, original appears cut] Standard Grinding Wheel Diameter: mm 750 Peripheral Speed: m/sec 45 Workpiece Spindle Taper (in tailstock quill): Morse 6 Infinitely Variable Workpiece Spindle Speed: rpm 8–156 Minimum Programmable Increment: - on X axis (diameter reference): mm 0.001 - on Z axis: mm 0.005 Table Swivel Range: ° +6 / -4 Grinding Wheel Head Swivel Range: ° +10 / -30 Workpiece Spindle Head Swivel Range: ° 90 Grinding Spindle Motor Power: kW 22 Workpiece Spindle Motor Power: kW 9 Total Motor Power: kW 45 Pneumatic Equipment Pressure: kPa 0.6 Hedpopy A Iqofx Acujfn Machine Weight: kg approx. 17,000

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2025, Schaudt PF61 1000 - 4000 Grinding length: 1,000 / 2,000 / 3,000 / 4,000 mm Centre height: 260 mm Further options available upon request: - Completely new control cabinet with Siemens Sinumerik One or Fanuc 0iTF-Plus CNC control - Quick setup via GSN operator interface - Diatronic in-process gauging system - Freely positionable B-axis - Second external grinding wheel - Internal grinding unit - Increased centre height - Dressing spindle for diamond form roller - Balancing and touch detection sensors - Hydraulic tailstock clamping / unclamping - Automatic Siemens door drive - 19" / 22" display - Remote maintenance - Retrofit to needle nozzles - Suitable coolant / extraction unit - Automation preparation - and much more. We are also happy to overhaul your existing stock machine! Schaudt / Studer / Kellenberger / Bahmüller / Voumard / Overbeck / Fortuna / Tacchella and many more. Hfjdpsiqxt Hsfx Acusn

Sąlyga: naudotas, Gamybos metai: 1980, Funkcionalumas: visiškai funkcionalus, šlifavimo ilgis: 5 000 mm, šlifavimo disko skersmuo: 750 mm, šlifavimo skersmuo: 580 mm, ruošinio svoris tarp centrų: 4 000 g, Used Gioria RU/S 5000 Cylindrical Grinding Machine – High-Precision Grinding Technology for Large Components Available from August 2025 – Inspection under power possible! This robust and precise external cylindrical grinding machine, the Gioria RU/S 5000, is designed for machining workpieces up to 5,000 mm in length and 4,000 kg in weight. Featuring hydrostatic grinding spindle bearings and a powerful 20 kW drive, it delivers top precision and outstanding grinding results – ideal for heavy-duty machining and the production of high-precision components. 🔹 Key Features: ✔ Max. grinding diameter: 580 mm ✔ Grinding length: 5,000 mm ✔ Workpiece weight: up to 4,000 kg ✔ Hydrostatic grinding spindle bearings for vibration-free operation ✔ Large grinding wheel Ø 750 mm for efficient material removal ✔ Infinitely variable workpiece spindle speed (10–180 rpm) for optimal adaptation to different components ✔ Hydraulic table drive (0.05 – 4.0 m/min) for precise longitudinal movement ✔ Digital X-axis readout for accurate infeed Powerful configuration for maximum efficiency The machine is equipped with comprehensive accessories, including: ✅ Coolant filtration system with paper band filter (tank capacity: 450 liters) ✅ 6 grinding wheel mounts for flexible machining options ✅ 8 steadies for stable workpiece support during long part processing ✅ Dressing unit positioned at the tailstock for precise grinding wheel dressing Ready for immediate operation – inspection in Stuttgart possible! The machine is currently still connected to power and can be demonstrated. Additional Data: Centre height: 300 mm Centre distance: 5,000 mm Max. workpiece diameter: 580 mm Max. workpiece diameter with steady rest: 30 – 400 mm Max. workpiece weight between centers: 4,000 kg Workhead spindle taper: Morse Taper 6 (MK 6) Tailstock taper: Morse Taper 6 (MK 6) Operating voltage: 400V/50 Hz Machine weight: approx. 20,000 kg Space requirement: approx. 13 x 3.5 m Grinding Wheel Spindle Head Grinding spindle drive: 20 kW Grinding spindle bearing: Hydrostatic Grinding wheel, max.: 750 x 100 x 305 mm Grinding wheel peripheral speed, max.: 1 – 34 m/sec (for wheel Ø 750 mm) Workhead Speed range, infinitely variable: 10–180 rpm Spindle taper: MK 6 Swivelling range: +/- 45 degrees Work Table Hydraulic table drive – infinitely variable 0.05 – 4.0 m/min Swivelling range work table: +/- 4 degrees Tailstock Hydraulically actuated sleeve travel Sleeve stroke: 90 mm Centre taper: MK 6 Dressing unit positioned at tailstock Coolant Filtration System Coolant tank with pressure pump and paper band filter Tank capacity: 450 liters 📍 Delivery: Ex works, loaded on truck 📅 Available from August 2025 Hodpfxjv Tnhwj Acusfn ⚙ Warranty: None, as it is a used machine Take advantage of this opportunity to acquire a high-quality cylindrical grinding machine for your production. Perfect for large and heavy workpieces – secure this machine now for high-precision grinding operations at the highest standard!

Sąlyga: naudotas, Gamybos metai: 1996, centro aukštis alkūniniame velene: 1 100 mm, ruošinio svoris (maks.): 80 000 kg, šlifavimo ilgis: 14 000 mm, šlifavimo disko skersmuo: 915 mm, šlifavimo skersmuo: 2 000 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 260 mm, ruošinio svoris tarp centrų: 80 000 000 g, ruošinio skersmuo tarp centrų: 2 000 mm, ruošinio ilgis tarp centrų: 14 000 mm, galia: 35 kW (47,59 AG), High-capacity cylindrical grinding machine with hydrostatic guides POMINI model HD 402/425 - year 1996 - maximum diameter 2000 mm - working length 14000 mm - between centers load capacity 80000 kg. Possibility of a complete retrofit of the machine's electrical unit; upgradable or adaptable for different applications. Hfsdpfxstxlyxj Acuen Grinding machine disconnected and ready for collection.

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 0000025, centro aukštis: 315 425 mm, ruošinio svoris (maks.): 3 000 kg, šlifavimo ilgis: 3 000 mm, šlifavimo disko skersmuo: 750 mm, bendras plotis: 2 700 mm, bendras ilgis: 11 000 mm, bendras aukštis: 2 200 mm, šlifavimo skersmuo: 630 850 mm, ruošinio svoris tarp centrų: 3 000 g, atstumas tarp centrų: 3 000 mm, šlifavimo ratuko plotis: 100 mm, padavimo ilgis Z ašis: 3 300 mm, šlifavimo veleno greitis: 1 000 aps./min, bendras svoris: 17 000 kg, sukimosi greitis (min.): 2 aps./min, sukimosi greitis (maks.): 250 aps./min, garantijos trukmė: 24 mėnesiai, greitas poslinkis X ašimi: 3 m/min, greitasis eiga Z ašyje: 6 m/min, įėjimo įtampa: 400 V, ruošinio veleno greitis (maks.): 250 aps./min, Įranga: sūkių greitis be galo kintamas, Cylindrical grinder BUC63/3000 CNC, brand new, in 100% condition, equipped with a Sinumerik ONE or INTRONIX TOS CNC control system. Hfodpfx Aceu U Ewgsuen It is possible to equip the machine with an additional superfine finishing device SUPFINA, or with a grooving unit for rubber or plastic rollers.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2025, Schaudt PF5 UB 1000-2500 mm Grinding lengths: 1,000 / 1,500 / 2,000 / 2,500 mm Centre height: 180 / 225 mm (higher options available) Workpiece weight: 350 / 500 / 800 kg (higher options available) Further freely selectable options: - Completely new control cabinet with Siemens Sinumerik One or Fanuc 0iTF-Plus CNC control - Fast setup via GSN operator interface Hjdpofg Tazsfx Acuefn - Diatronic measuring device - Freely positionable B-axis - Second external grinding wheel - Internal grinding unit - Increased centre height - Dressing spindle for diamond form roller - Balancing and touch sensors - Hydraulic clamping/unclamping of the tailstock - Automatic Siemens door drive - 19" / 22" display - Remote maintenance - Conversion to needle nozzles - Suitable coolant/extraction system - Automation preparation - And much more We are happy to overhaul your existing stock machine as well! Schaudt / Studer / Kellenberger / Bahmüller / Voumard / Overbeck / Fortuna / Tacchella and many more.

Gamybos metai: 1966, Sąlyga: naudotas, mašinos/transporto priemonės numeris: 12485, Grinding diameter: 350 mm Grinding length: 2,500 mm Centre height: 180 mm Total power requirement: 5.5 kW Machine weight approx.: 5.5 t Hodpfxoi E Ix No Acujfn