Dygiavimo staklės Frezavimo staklės

Martin

Būklė: labai geros būklės (naudotas), Katalogo numeris 7758 TECHNINIAI DUOMENYS Diskinis pjūklas: - Didžiausias disko skersmuo 350mm - Velenas 30mm - Velenas fiksuojamas - Disko reguliavimas priekin/atgal, aukštyn/žemyn, kampas - Disko apsauga - Variklis 1,1kW - Nusiurbimo antgalio skersmuo 80mm Frezavimo staklės: - Frezavimo velenas: - Veleno skersmuo 40mm - Darbinis veleno aukštis 150mm - Velenas fiksuojamas - Maksimalus frezos skersmuo 350mm - 2 sukimosi greičiai: 3000, 4500aps./min - Variklis apie 5,5kW - Stabdis - Šoninis vežimėlis – rankinis pastūma - Vežimėlio matmenys ilgis/plotis 1180x600mm Ppodpfx Acozaa Tveasw - Kampinis liniuotė - Pneumatinis prispaudėjas - Nusiurbimo antgalių skersmuo 125mm - Matmenys ilgis/plotis/aukštis 1750/2600 (siuntimui 1200)/1400mm - Svoris 715kg PRIVALUMAI – Pagaminta Vokietijoje – Labai gera būklė – Naudota frezavimo staklė Kaina be PVM: 13 900 PLN Kaina be PVM: 3 300 EUR pagal 4,2 EUR kursą (Kainos gali keistis esant didesniems svyravimams)

Gamybos metai: 2004, būklė: labai geros būklės (naudotas), Four-side planer - Maximum planing width: 23 cm - Maximum planing height: 16 cm - 2 feed rollers in the table - Chrome-plated table - Infinitely variable feed speed adjustment - 2 overhead transfer rollers in front of the bottom head, plus a roller device for short elements Psdjhlp D Njpfx Acaepw - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW The machine is in very good condition, lightly used, equipped with spiral cutterheads on the bottom, right, and left spindles, and a Tersa knife head on the top spindle.

Būklė: naudotas, Šis „Martin“ markės sukamoji spindelinė frezavimo staklė yra parduodamas mūsų pramonės aukcione / staklių aukcione / įmonės likvidavimo aukcione „Bert Lenz Möbelmanufaktur Gmbh“. Aukcione parduodami staklės, įrankiai, dirbtuvės ir medžiagos. Psdpfx Ajzp Dhhocaspw Šį ir daugelį kitų prekių galite rasti mūsų platformoje.

Būklė: labai geros būklės (naudotas), Katalogo numeris 8057 TECHNINĖS CHARAKTERISTIKOS – maksimalus disko skersmuo 400 mm – disko angos skersmuo 30 mm – maksimalus pjovimo aukštis 120 mm – veržlės fiksatorius – pagrindinis diskas, reguliuojamas aukštyn/žemyn ir kampu – disko apsauga – su šoniniu vežimėliu – pjovimo ilgis ant vežimėlio 1000 mm Pedpfx Acoznk T Ueaepw – pjovimo plotis prie kreipiančiosios 1050 mm – pagrindinis variklis 3 kW – su prailgintuvu – stalviršio matmenys su prailgintuvu 1050 x 1730 mm – 3 sukimosi greičių tipai – matmenys (ilgis/plotis/aukštis) 2700 x 1750 x 1000 mm – svoris 860 kg PRIVALUMAI – pagaminta Vokietijoje – disko apsauga – didelis diskas 400 mm – naudota, labai geros būklės Grynasis kainos: 7900 PLN Grynasis kainos: 1881 EUR, priklausomai nuo 4,20 EUR kurso (Kainos gali keistis priklausomai nuo didesnių svyravimų)

Būklė: geras (naudotas), Code : 0323 Marca : SML - ITALIA Modello : SILVER P 35/EL - Conforme CE Troncatrice elettronica doppia a misura per il taglio di legno, cornici, PVC, alluminio, materie plastiche e vari materiali - Conforme normativa CE Dati tecnici: - Discesa teste oleo-pneumatica - Lunghezza di taglio max mm 5200 - Lunghezza di taglio min mm 50 - Altezza di taglio mm 100 - Larghezza di taglio max mm 170 - Diametro lama mm 350 F30 - Motore Hp 3 ciascuno - Giri/min 3000 - Programmatore elettronico del posizionamento teste - Comando bimanuale per discesa lama - Pressioni pneumatiche per bloccaggio pezzo - N° 2 bocche aspirazione diametro mm 60 - Pressione di esercizio 7 bar - Dimensioni totali mm 6300 x 1000 x 1600 h Podpfx Acetu Hy Eeajpw - Peso kg 1100

Būklė: naudotas, Gamybos metai: 1991, Valdymo pultas akių lygyje Aigner su integruotu ribotuvu, įskaitant pastūmos įrenginį su stumiamu vežimėliu (be ribotuvas-kreipiančiojo liniuotės). Frezavimo ribotuvas su skaitmeniniu indikatoriumi ir atlenkimo mechanizmu. Sandėliavimo vieta: Nattheim. Psdpfx Acjyi A Tdeaepw

Būklė: naudotas, Gamybos metai: 2014, pjovimo plotis (maks.): 1 250 mm, pjūklo disko skersmuo: 400 mm, pjūklo disko nuolydžio reguliavimas: 46 °, aukščio reguliavimo tipas: elektrinis, sukimosi greitis (maks.): 5 000 aps./min, sukimosi greitis (min.): 3 000 aps./min, bendras ilgis: 2 800 mm, bendras plotis: 2 100 mm, bendras aukštis: 1 700 mm, bendras svoris: 900 kg, Įranga: CE žymėjimas, dozatorius, pjūklo disko apsauga, Nr. 04540 Diskinis pjūklas „Martin TC 660“ Naudotas, pagamintas 2014 m. Stumdomas stalas, ilgis 2600 mm Maksimalus disko skersmuo 400 mm Pjovimo plotis 1250 mm Sukimosi greičiai 3000 / 4000 / 5000 aps./min. 2 ašių preliminarinio pjovimo įrenginys su rankiniu nustatymu Rankinis disko pasvirimo kampo nustatymas 0°–46° Elektrinis pjovimo aukščio reguliavimas Skersinis stalas, maždaug 1250 x 700 mm (plotis x ilgis) Pasviriamas ilgio atramos bėgelis, ištraukiamas iki 3200 mm Ppodezmgkajpfx Acaow Disko apsauginis gaubtas, pasviriamas Atitinka CE standartus Pridedama naudojimo instrukcija PDF formatu Transportavimo matmenys, maždaug 2800 x 2100 x 1700 mm (plotis x ilgis x aukštis) Svoris, maždaug 900 kg Siekiant išvengti galimų nesusipratimų, rekomenduojama ir įmanoma atlikti apžiūrą vietoje, iš anksto susitarus dėl laiko. Pardavimas vykdomas tokios būklės, kokios yra. Techninės specifikacijos, būklės aprašymas, pagaminimo metai ir komplektacija nurodyti gamintojo prospekte arba pateikiami buvusio savininko. Garantijos netaikoma. Pardavimas gali būti vykdomas ir kitam pirkėjui. Naudotoms mašinoms jokia garantija netaikoma, taikoma taisyklė: „pirkta, apžiūrėta“. Mokėjimo sąlygos: kainos nurodytos be PVM, apmokėjimas atliekamas prieš atsiimant arba išsiunčiant prekę. Pristatymo sąlygos: iš sandėlio.

Būklė: naudotas, mašinos/transporto priemonės numeris: 008116, Maks. apdirbimo aukštis: 120 mm Pjdpfxsw Iddze Acaopw Maks. padavimo greitis: 25 m/min Darbo velenų skaičius: 6

Būklė: naudotas, Naudota staklė Įranga ir techniniai duomenys: – Stalo matmenys: 800 x 1000 mm – Stalo angos skersmuo: 480/380/170/125 mm – Frezuoklio veleno kūgis: MK 5 – Frezuoklio veleno greitis: 3000 aps./min. – Frezuoklio veleno reguliuojamo aukščio diapazonas: 150 mm – Atstumas nuo frezuoklio veleno centro iki priekinio stalo krašto: 400 mm – Didžiausias leistinas įrankio skersmuo: 250 mm – Su medinėmis atraminėmis plokštelėmis (pageidaujant galima pakeisti metalinėmis) – Su „Holz Her“ 3 ritinių įtaisiniu – Su sunkiu slankiuoju stalu; juda ant guolių, užtikrinant visiškai lygiagrečius kreipiamuosius bėgelius Ppsdpfx Acszlbqxeajw – Svoris: apie 800 kg Prieinamumas: greitai Vieta: 63934 Röllbach

Būklė: naujas, Gamybos metai: 2024, Martin Thickness Planer T 45 with XPLANE Cutterhead The T45 thickness planer provides ideal prerequisites for modern production: It delivers superbly planed surfaces, is quick and simple to operate, and also runs exceptionally quietly. The standard electronic control allows you to store up to 99 planing heights, making setting the planing height so easy that the first workpiece already fits perfectly. Of course, the thickness table can be adjusted with a simple push of a button or incrementally in 0.1 mm steps. The controls for feed adjustment are conveniently positioned within easy reach. The heavy, vibration-damping composite frame combined with the high-quality cutterhead bearings guarantee outstanding surface finishes. Thanks to its sound-absorbing design, quiet operation is standard even in the basic version. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Min. workpiece length: 270 mm • Speed: 5,000 rpm • Controls: Single-axis control for planing height, up to 99 values storable, 49 of which can be used for a freely programmable planing sequence; buttons for manual rapid and fine adjustment of thickness via digital display, pushbuttons for cutterhead start and stop, integrated operating hours counter • Cutterhead: Solid steel Xplane cutterhead Cutterhead with 3 spiral knife rows (33 convex carbide knives per row), supplied with full knife set and one T-key Torx T20; spindle speed 6,000 rpm included; The emission sound pressure level LpA during operation is reduced by 10 dB(A). • Thickness table: Electronic adjustment with fine setting, travel speed 10 mm/s, supported by 4 anti-tilt spindles, finely planed table surface • Infeed: 2 speeds, 6 / 12 m/min, electronically selectable even during planing; large rubber feed rollers Ø 85 mm for compensating variable timber thickness, gentle and self-cleaning rubber rollers, simple roller swap; sectional pressure bar at infeed • Extraction: Highly pivotable divided extraction hood with 160 mm chip extraction port, can be connected left/right (both sides possible in special cases); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil points; lubrication of bearings/cutterhead via nipples • Accessories: 1 grease gun filled with long-life grease 1 oil gun 1 open-ended spanner 1 knife change tool 1 pair of dummy knives 640 mm 2 pairs TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at workstation LpA acc. to DIN EN ISO 11202 [dB(A)] No-load noise (no extraction) P1 65 No-load noise (with extraction) P1 77 Working noise (no extraction) P2 65 Working noise (with extraction) P2 78 Sound power level LWA acc. to DIN EN ISO 3746 [dB(A)] No-load noise (no extraction) 84 Working noise (with extraction) 90 Dust emission: Low-dust operation according to DGUV 209-044 / BGI 739-1 Location: ex-stock 54634 Bitburg - immediately available - Ppsdpfoqlck Nex Acajw

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2004, WEINIG UNIMAT SUPER 4 Planer/Moulder – German-made – Very good condition – Year of manufacture: 2004 – Technical documentation (manual included) TECHNICAL SPECIFICATIONS: Planing width: 150 mm Planing height: 50 mm Spindle diameter: 40 mm Equipped with tooling Adjustable top spindle head 1) Bottom spindle: 11 kW, 6000 rpm 2) Top spindle: 18.5 kW, 7000 rpm 3) Lower spindle: 5.5 kW, 6000 rpm Feed motor: 2.2 kW Feed rate adjustable via inverter: 0–18 m/min Ppjdein Nrgjpfx Acajw Feed via cardan shafts Pneumatic pressure system Three top steel feed rollers One top rubber roller Ribbed infeed table Infeed table length: 1,950 mm Total power: 37 kW Central lubrication system Transport dimensions: Length/Width/Height: 320x220x220 cm Weight: approx. 2,700 kg

Būklė: naujas, Gamybos metai: 2024, Martin Thickness Planer T 45 with Tersa Cutter Block The T45 thickness planer offers ideal conditions for modern manufacturing: It produces smoothly planed surfaces, is quick and simple to operate, and also works exceptionally quietly. The standard electronic control with 99 programmable planing measurements makes setting the planing height so easy that your first workpiece will fit perfectly. The thickness table can be adjusted at the push of a button or incrementally in steps of 0.1 mm. All feed rate control elements are conveniently within reach. The heavy, vibration-dampening composite frame combined with the high-quality precision-mounted cutter block guarantees superior surface quality. Thanks to the sound-insulating construction, even the standard version operates at low noise levels. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Spindle speed: 5,000 rpm • Operation: 1-axis control for planing dimension, up to 99 values storable, 49 of which can be used for freely programmable planing sequences; buttons for manual rapid and fine adjustment of planing thickness with digital display, push button for cutter block start/stop, integrated operating hours counter • Cutter block: TERSA solid steel cutter block Z4 Ø 125 mm; includes lock for quick and easy knife change • Thickness table: Electronic height adjustment with fine tuning, adjustment speed 10 mm/s, tip-proof supported on 4 lifting spindles, finely planed table surface • Feed: 2 speeds 6 / 12 m/min, can be selected electrically even during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, gentle and self-cleaning rubber rollers, quick roller change; segmented pressure bar at infeed • Extraction: Hinged, split hood with chip extraction port Ø 160 mm, can be connected left/right (both sides possible for special applications); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings/cutter block via grease nipples • Accessories: 1 grease gun with long-life grease 1 oil gun 1 open-end wrench 1 tool for knife changing 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Workplace emission sound pressure level LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Ppjdpsqlckpefx Acaew Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission: Low-dust according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Būklė: naujas, Gamybos metai: 2025, Martin T 54 Surface Planer Only with a high-quality surface planer can you truly achieve perfect foundations. The T54 was designed precisely with this goal in mind. It allows you to joint workpieces easily and accurately at the most modern level, and reliably equip them with precise angled edges. The machine comes standard with a TERSA solid steel cutter block. The Xplane cutter block with shear cut motion is available as an optional feature. Chamfering is effortless, thanks to the user-friendly single-handed adjustment, allowing any angle between 90° and 45° to be set quickly. The robust cast iron tables of the T54 provide a secure support even for large, heavy workpieces. If you require additional table length, both the infeed and outfeed tables can each be extended by 380 mm—also made of cast iron, of course. Technical Data - Table width: 500 mm - Table length: 2840 mm - Maximum cutting depth: 8 mm Psdpfx Ajpq If Docaepw - Cutter block: diameter 125 mm, 5000 rpm, Tersa Z4 - Speed: 5000 rpm - Motor power: 5.5 kW - Fence adjustable up to 45° - Auxiliary fence for small workpieces - Electric table adjustment Equipment: - T 54 - T 5462-a Suvamatic - T5406/3-a Xplane solid steel cutter block with 3 spiral knife rows (each row with 26 convex carbide knives; 2 counter-knives), delivered including full knife set and a T-wrench Torx T20; spindle speed 6,000 rpm included. - The emission sound pressure level LpA during operation is reduced by 8 dB(A). Location: ex stock 54634 Bitburg - immediately available -

Būklė: naujas, Gamybos metai: 2022, Working width: 630 mm Planing height: 300 mm Cutterhead: Tersa Number of knives: 4 Height adjustment: electric Planing thickness display: mechanical counter display Feed speed: 7-11-15-19 m/min Infeed roller: segmented steel Pressure bar: segmented Outfeed roller: rubber Table rollers: none Table extension: Yes, infeed and outfeed Motor power: 7.5 kW Extraction port: 160 mm Machine length: 1070 mm Machine width: 900 mm Podpfx Acohpl T Hsaspw Weight: 750 kg

Būklė: naujas, Gamybos metai: 2025, Martin Panel Saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Tilting: one-sided Drive power: 5.5 kW Rip fence table length: 3.0 m Cutting width: 1350 mm Parallel fence operated by handwheel Standard crosscut table with length stop for miter cuts Analog length stop with continuous fence Rear table extension T66 T6615/2-a Drive power 5.5 kW T6630/3-a Rip fence table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Parallel fence operated by handwheel Pjdpfx Acov Erkajaspw T6660/1-a Standard crosscut table for miter cuts T 6670-a Analog length stop T 6680/1-a Rear table extension Location: ex-stock 54634 Bitburg - immediately available - Please note: Some images may show options that are not included in the offer.