Weinig Unicontrol 6 Nc Spindeln pirkti naudotą (53 549)

Būklė: nepatikrintas (naudotas), Gamybos metai: 1999, Šlicavimo velenas 1 vnt. Frezavimo agregatų kiekis 4 vnt. Veleno skersmuo 50 mm Valdymas Weinig PC-Nexus #7015 Weinig Unicontrol 6 su NC velenais ----- Įrenginys eksploatuojamas iki 2026 m. rugsėjo, galima apžiūrėti veikimo metu Techninių duomenų santrauka (Dėl galimai papildomos komplektacijos prašome teirautis) Poz. 1: Ilginimo pjūklas ----- > Ilginimo pjūklas, elektroninis, horizontaliai sklandžiai reguliuojamas > Įrankių kiekis: 1 vnt. > Veleno apsisukimų dažnis: 2.800 aps./min > Veleno skersmuo: 40 mm > Maks. įrankio skersmuo: 400 mm > Variklio galia: 3,0 kW > Lazerinė linija pjūvio vietai nustatyti > NC ilgio atmušėjas, montuotas ant šlicavimo stalo, įskaičiuotas Ilginimo pjūklo pozicionavimas integruotas į valdymą. > Ilgis 3500 mm Poz. 2: Špizo ir šlicavimo velenas ----- > Įrankių kiekis: kintamas, valdomas NC ašimi be fazių > Įrankio tvirtinimo ilgis: 320 mm > Veleno vertikalus eiga: kintama, be fazių, 254 mm NC ašis > Veleno apsisukimų dažnis: 3.500 aps./min > Veleno skersmuo: 50 mm > Maks. įrankio skersmuo: 320 mm > Variklio galia: 11 kW Poz. 3: 1-asis profiliavimo velenas (vienkryptis ir priešpriešinis) ----- > Padėtis: vertikalus dešinėje > Įrankių kiekis: 1 vnt. > Įrankio tvirtinimo ilgis: 120 mm > Veleno apsisukimų dažnis: 6.000 aps./min > Veleno skersmuo: 50 mm > Maks. įrankio pjovimo skersmuo: 232 mm > Variklio galia: 7,5 kW Poz. 4: 2-asis profiliavimo velenas ----- > Padėtis: vertikalus dešinėje > Įrankių kiekis: kintamas, valdomas NC ašimi be fazių > Įrankio tvirtinimo ilgis: 320 mm > Veleno vertikalus eiga: kintama, be fazių, 254 mm NC ašis > Veleno apsisukimų dažnis: 6.000 aps./min > Veleno skersmuo: 50 mm > Maks. įrankio pjovimo skersmuo: 232 mm > Variklio galia: 11 kW Poz. 5: Horizontalus viršutinis profiliavimo frezavimo agregatas ----- > Tvirtinimo ilgis: 40 mm > Veleno skersmuo: 40 mm > Variklio galia: 3,0 kW Hsdjzdk Hyjpfx Aftjfh > Apsisukimai: 5.850 aps./min > Maks. įrankio pjovimo skersmuo: 130 mm > Ašinė eiga 2 pozicijos > Radialinė eiga 2 pozicijos Poz. 6: 3-iasis profiliavimo velenas (furnitūros velenas) ----- > Padėtis: vertikalus dešinėje > Įrankio tvirtinimo ilgis: 160 mm > Ašinė eiga 3 pozicijos > Radialinė eiga 2 pozicijos > Veleno apsisukimų dažnis: 5.850 aps./min > Veleno skersmuo: 40 mm > Maks. įrankio pjovimo skersmuo: 210 mm > Variklio galia: 3,0 kW Kitos funkcijos ----- > Prijungimo prie interneto galimybė > Falcavimo įrenginys švariam falcavimui be atplaišų > Dvigubų ruošinių paketas > Grąžinimo įrenginys darbui vienam operatoriui: lamelinis transporterio konvejeris > Ekraninis valdymas > Kampinių langų įrenginys > Elektroninė kampo indikacija kampiniams langams > Pramoninis PC, PC-valdymas / NEXUS > Be apdirbimo įrankių ----- Minėtos staklės kainą pateiksime pagal užklausą! ----- Papildoma opcija su priemoka: 6 500,00 EUR Naudotų įrankių pastaba: Šiuo metu turime naudotus Gold įrankius, sandėlio nr. #2790 Langų įrankiai Gold IV78 medžiui ir IV78 medžiui/aliuminiui Buvo naudoti Weinig Unicontrol 10, naudojant Unicontrol 6 reikia papildomo sujungimo frezos. Įrankių komplektas FESTHUB arba CNC velenų staklėms su 80 ir 95 mm eiga, (komplektas techniškai paruoštas IV 92) Medžio-aliuminio įrankių komplektas FESTHUB staklėms su 80 ir 95 mm eiga ir papildomi įrankiai 1 komplektas Stehle IV68 medžiui taip pat įskaičiuotas Be Gla...

Būklė: dilaminuotas dirbtuvėje (naudotas), Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- The machine will be cleaned and fully inspected before delivery. Technical Data Overview (additional accessories possibly included; please inquire separately) Pos. 1: Cross-cut saw ----- > Electronic cross-cut saw, horizontally adjustable steplessly > Number of tools: 1 pc. > Spindle speed: 2,800 rpm Hfsdsvu Hfqjpfx Afteh > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide for saw cut detection > NC length stop, mounted on slot table included Positioning of cross-cut saw integrated in the control system. > Length: 3500 mm Pos. 2: Tenoning and slot spindle ----- > Number of tools: variable, stepless NC-axis adjustment > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless 254 mm NC-axis adjustment > Spindle speed: 3,500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 3: 1st Profiling spindle (climb & counter-rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd Profiling spindle ----- > Position: vertical right > Number of tools: variable, stepless NC-axis adjustment > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless 254 mm NC-axis adjustment > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Muntin guide consisting of: Guide rail on the stop (climb spindle section), muntin support bar from above in the area of the vertical right profiling unit and profiling spindle. Pos. 5: Horizontal profiling unit, top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool diameter: 130 mm > Axial adjustment 30 mm, 8 positions via pneumatic turret > Radial adjustment 125 mm, 8 positions via pneumatic turret Pos. 6: 3rd profiling spindle (hardware spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment 115 mm, 8 positions via pneumatic turret > Radial adjustment 100 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool diameter: 210 mm > Motor power: 3.0 kW Additional Features ----- > Online-capable > Rebate device for tear-free rebating > Double-parts package > Return system for one-man operation: swivel belt > Screen control > Tilt window unit > Electronic angle display for tilt windows > Industrial PC, PC control/NEXUS > Weinig type production program > Without working tools No original pictures available yet. Images show an identical machine from our archive. ----- Price for the above-mentioned machine on request! ----- Option with surcharge: EUR 6,500.00 Note...

Būklė: dilaminuotas dirbtuvėje (naudotas), Slotting spindle 1 pc. Number of milling units 5 pcs. Spindle diameter 50 mm Control: Weinig, PC-Nexus #2774 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and fully inspected before delivery ----- Technical Data Summary (For any additional included accessories, please inquire) Item 1: Cross-Cut Saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3 kW > Radial travel, pneumatically controlled, 8 positions, e.g. for edge rounding from above > Laser guide light for cut section identification Item 2: Rounding Unit, Horizontal Lower Position ----- > Position: horizontal, bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length: 25 mm > Spindle speed: 9,000 rpm > Max. tool diameter: 130 mm > Axial movement mechanically linked with cross-cut saw > Radial travel, pneumatically controlled (on/off) NC-Controlled Length Stop ----- > Length: 3,500 mm > Electronic length stop Item 3: Tenoning and Slotting Spindle ----- > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 3,500 rpm > Max. tool circle diameter: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 4: 1st Profiling Spindle (Climb/Counter-Climb Cutting) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool circle diameter: 232 mm > Motor power: 7.5 kW Item 5: 2nd Profiling Spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment, NC Hfodovu Hghopfx Aftjh > Tool clamping length: 320 mm > Vertical stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool circle diameter: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash guide consisting of: Guide fence on the stop (area of climb-cut spindle), Sash support rail from above in the area of the vertical right profiling unit and profiling spindle. Item 6: Horizontal Upper Profile Milling Unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 9,000 rpm > Max. tool circle diameter: 130 mm > Axial travel: 30 mm, 8 positions > Radial travel: 125 mm, 8 positions Item 7: 3rd Profiling Spindle (Hardware Spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial travel: 115 mm, 8 positions > Radial travel: 110 mm, 8-position turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool circle diameter: 210 mm > Motor power: 3.0 kW Item 8: Bottom Profile Milling/Grooving Unit ----- > Motor power: 3.0 kW > Tool clamping length: 125 mm > ...

Būklė: nepatikrintas (naudotas), Gamybos metai: 2004, Pjovimo velenas 2 vnt. Frezuojančių agregatų skaičius: 7 vnt. Veleno skersmuo: 50 mm Valdymas: Weinig PC-Nexus # 6726 Weinig Unicontrol 12 CNC ----- Parduodama pagal kliento užsakymą. Įrenginys prijungtas ir galima demonstracija. Įskaičiuoti naudoti langų įrankiai Unicontrol 12, OERTLI, įvairūs medienos storio pasirinkimai ----- Trumpa santrauka: ----- - 2 CNC valdomi pjovimo velenai, kiekvienas po 640 mm ilgio - Variotisch - 3 CNC valdomi profiliavimo velenai, kiekvienas po 400 mm ilgio - Baldų furnitūros velenas ir griovelio agregatai viršuje ir apačioje - Įskaičiuoti naudoti langų įrankiai Unicontrol 12, OERTLI, įvairūs medienos storio pasirinkimai ir įdiegtos sistemos (žr. pridedamą PDF) Išsamus aprašymas: ----- Trumpoji pjūklas ----- Elektroninis trumpoji pjūklas, horizontaliai bepakopiai reguliuojama Įrankių skaičius: 1 vnt. Veleno sukimosi greitis: 3000–6000 aps./min. Veleno skersmuo: 40 mm Didžiausias įrankio skersmuo: 400 mm Variklio galia: 3 kW Lazerinė linija pjūvio vietai parodyti Suapvalinimo agregatas ----- Padėtis: horizontaliai apačioje Variklio galia: 1 kW Veleno skersmuo: 20 mm Veleno sukimosi greitis: 9000 aps./min. Didžiausias įrankio skriejimo ratas: 130 mm elektroninis ilgio ribotuvas, ilgis: 3500 mm ----- 1. Įrutės ir pjovimo velenas ----- Įrankių skaičius: kintamas, CNC valdomas Įrankio tvirtinimo ilgis: 640 mm Veleno vertikalus ėjimas: kintamas, CNC valdomas Veleno sukimosi greitis: 2800–4000 aps./min. Veleno skersmuo: 50 mm Didžiausias įrankio skersmuo: 380 mm Variklio galia: 15 kW 2. Įrutės ir pjovimo velenas ----- Hfodpfx Afeyyqm Iotjh Įrankių skaičius: kintamas, CNC valdomas Įrankio tvirtinimo ilgis: 640 mm Veleno vertikalus ėjimas: kintamas, CNC valdomas Veleno sukimosi greitis: 2800–4000 aps./min. Veleno skersmuo: 50 mm Didžiausias įrankio skersmuo: 380 mm Variklio galia: 15 kW 1. Profiliavimo velenas ----- Padėtis: vertikaliai dešinėje Įrankių skaičius: kintamas, CNC valdomas Įrankio tvirtinimo ilgis: 400 mm su viršiniu guoliu Veleno vertikalus ėjimas: kintamas, CNC valdomas Veleno horizontalus ėjimas: kintamas, CNC valdomas Veleno sukimosi greitis: 6000 aps./min. Veleno skersmuo: 50 mm Didžiausias įrankio skriejimo ratas: 232 mm Variklio galia: 11 kW 2. Profiliavimo velenas ----- Padėtis: vertikaliai dešinėje Įrankių skaičius: kintamas, CNC valdomas Įrankio tvirtinimo ilgis: 400 mm su viršiniu guoliu Veleno vertikalus ėjimas: kintamas, CNC valdomas Veleno horizontalus ėjimas: kintamas, CNC valdomas Veleno sukimosi greitis: 6000 aps./min. Veleno skersmuo: 50 mm Didžiausias įrankio skriejimo ratas: 232 mm Variklio galia: 11 kW 3. Profiliavimo velenas ----- ...

Būklė: naudotas, Number of spindles: 3 units Number of tool sets: 8 units Spindle diameter: 50 mm Dimensions (length/width/height): 4250x1850x2300 mm ! MACHINE FUNCTIONALLY TESTED AND READY FOR DEMONSTRATION ! !!! Detailed technical description from the manufacturer, more machine images and, if available, machine videos can be found at the end of this technical description as a file attachment !!! # 6988 Weinig Univar 6 CNC Spindles Refurbished ..... Technical Data Summary (Please inquire for any additionally included accessories) ..... ..... 1. Profiling Spindle (Climb-milling spindle with automatic plunge) ..... > Climb-milling for tear-free rebating > Position: vertical right > Number of tools: 1 > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool clamping length: 120 mm > Motor: 11.0 kW 2. Profiling Spindle ..... > Position: vertical right > Number of tools: variable, CNC-controlled > Spindle stroke (vertical): variable, CNC-controlled > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool clamping length: 320 mm > Motor: 11 kW 3. Profiling Spindle (Hardware milling unit) ..... Position: vertical right Spindle diameter: 40 mm Tool clamping height: 160 mm Motor: 3 kW Adjustment: radial and axial, indexed to 8 positions by pneumatic turret Additional Features ..... > Internet-enabled > PC-Nexus screen control > Perimeter milling carriage for milling sash frame widths under 500 mm. Automatic pneumatic clamping Extraction nozzle diameters: Profiling spindle 1: 140 mm Profiling spindle 2: 140 mm Hardware spindle: 120 mm If the technical specifications of this machine do not meet your requirements, please contact us. Our experienced team will be happy to support you with any necessary modifications or in finding a machine that suits your needs! All technical data as per manufacturer specification – subject to confirmation! Hfjdpoymf Ekefx Aftsh All prices plus legal VAT. Changes and errors in technical details and specifications excepted.

Būklė: nepatikrintas (naudotas), Slotting spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Used Weinig Unicontrol 6 window machining center ----- For sale on behalf of customer Manufacturer’s description: Designed for the production of individual parts, components, and small series. Spindle arrangement: One crosscut saw, a single tenoning and slotting spindle, a right-hand profiling spindle, a tenoning/slotting spindle, and a profiling spindle suitable for stacking multiple tools on top of each other, with pneumatic spindle movement. Slot table with motorized table movement and automatic transfer into the continuous, chainless rubber roller feed of the profiling unit. Height adjustment of the feed by manual control. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifier for precise frame or sash external dimensions. Control of tool positions (longitudinal and cross machining) via selector switch on the operator panel. Technical data ----- Crosscut saw ----- Number of tools: 1 Spindle speed: 2,800 rpm Spindle diameter: 40 mm Maximum tool diameter: 350 mm Motor: 3 kW Tenoning and slotting spindle ----- Number of tools: 3/4 pcs. for timber thicknesses IV 68 – IV 92 Spindle speed: 3,500 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Maximum tool diameter: 320 mm Motor: 11 kW Profiling spindle ----- Number of tools: 3/4 pcs. for timber thicknesses IV 68 – IV 92 Spindle speed: 6,000 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Maximum tool diameter: 232 mm Motor: 11 kW Special equipment: Hfjdpfx Afsx Tu N Hjtsh Synchronised spindle ----- Pneumatically actuated forward/backward motion for tear-free profiling of window sashes, frames, and doors. Spindle diameter: 50 mm, 4 kW Tool clamping length: 120 mm, tool min. diameter: 112–140 mm, max. tool diameter: 232 mm, spindle speed: 6,000 rpm Motor upgrade for synchronised spindle from 4 kW to 7.5 kW Screen control for 99 window types. 1 type can contain up to 8 different parts, each with 2 end profiles and 2 longitudinal profiles. Production possibilities: single pieces, double pieces, by frame, series production, profiling. Data input via keyboard with integrated user guidance and error diagnostics. 1 Groove spindle from above ----- Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm, with keyway 10 x 4 mm Mounting length: 13 mm Clamping length: 40 mm Axial stroke: 2 positions Radial stroke: 2 positions Max. tool diameter: 130 mm Motor upgrade for groove spindle from 2.2 to 3 kW 1 hardware recessing unit, right: ----- For routing the hardware groove during profiling or for grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch on the operator panel. Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm Clamping height: 125 mm Tool cutting circle: min. 140 mm, max. 180 mm Home position below table: 10 mm Hardware router in special design: Clamping length 150 mm Axial stroke 80 mm, 3 positions 3 tools Radial stroke, 2 positions Motor upgrade for hardware routing spindle from 2.2 to 3 kW Hardware routing spindle for 230 mm tool diameter in and above table Electrical height adjustment of the feed with selector switch on the operator panel for 2 timber dimensions, includ...

Būklė: paruoštas naudoti (naudotas), Slotted spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 40/50 mm # 2809 Weinig Unicontrol 6 ----- Machine will be fully inspected at our facility in Oberkochen prior to delivery! Technical Data Overview (For any additionally included accessories, please enquire) Pos. 1: Crosscut saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for cut section identification CNC-controlled length stop ----- > Length: 3,600 mm > Electronic length stop including positioned crosscut saw Pos. 2: Tenoning and slotting spindle ----- > Number of tools: 3 (pneumatic stroke 2 x 100 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 3,000 rpm > Max. tool rotation diameter: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 360 mm > Motor power: 11 kW Pos. 3: 1st profiling spindle (climb & counter-rotation) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool rotation diameter: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: 3 (pneumatic stroke 2 x 100 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool rotation diameter: 232 mm > Motor power: 11 kW 2 axially indexed feed rollers opposite the profiling spindle, for processing narrow, short parts (e.g. glazing bar components) Glazing bar guide consisting of: Glazing bar support rail from above in the area of the vertical right profiling unit and profiling spindle. Pos. 5: Horizontal top profiling unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool rotation diameter: 130 mm > Axial adjustment range: 52 mm, indexed to 2 positions > Radial adjustment range: 125 mm, indexed to 2 positions Pos. 6: 3rd profiling spindle (hardware spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range: 90 mm, indexed to 3 positions > Radial adjustment range: 100 mm, indexed to 2 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool rotation diameter: 210 mm > Motor power: 3.0 kW Additional Features ----- > Electrically adjustable feed height incl. mechanical digital display and manual feed bar clamp Hjdpjxtvgkofx Aftofh > Rebating device for splinter-free rebate cutting > Twin part package > Return feed system for single-operator control: swing belt > Screen control > Inclined window setup > Electronic angle display for inclined windows > Industrial PC with Windows PC control/NEXUS Extraction port diameters: ----- Crosscut saw: 80 mm Slotting spindle: 140 mm Profiling spindle 1...

Būklė: nepatikrintas (naudotas), Gamybos metai: 2004, Pjovimo frezos velenas 2 vnt. Frezu agregatų skaičius: 7 vnt. Veleno skersmuo: 50 mm Valdymas: Weinig PC-Nexus Weinig Uncontrol 12 Su radialiniais ir ašininiais NC velenais bei VARIO stalu ..... Staklės jau profesionaliai išmontuotos ir sandėliuojamos 73447 Oberkochen mieste Techninių duomenų santrauka (papildomai esanti komplektacija – teirautis atskirai) ..... Trumposios pjovimo staklės ..... > Elektroninės trumposios pjovimo staklės, horizontalus reguliavimas be pakopų > Įrankių skaičius: 1 vnt. > Veleno apsukos: 3000-6000 aps./min > Veleno skersmuo: 40 mm > Maks. įrankio skersmuo: 400 mm > Variklio galia: 3,7 kW > Lazerinė pjovimo ruožo žymėjimo sistema > Ašinė reguliavimo eiga: 150 mm, NC ašis, elektrinis bepakopis reguliavimas > Radialinė reguliavimo eiga: pneumatinė, 8 pozicijos, pvz. apčiuopiamas krašto užapvalinimas iš viršaus Kraštų užapvalinimo agregatas ..... > Padėtis: horizontaliai iš apačios > Ašinė reguliavimo eiga drauge su trumposiomis pjovimo staklėmis Elektroninis ilgio ribotuvas ..... > Ilgis: 4500 mm 1. Tekinimo ir pjovimo frezos velenas ..... > Įrankių skaičius: kintamas > Variklio galia: 15 kW > Veleno skersmuo: 50 mm > Įrankio tvirtinimo ilgis: 640 mm, su atrama > Ašinė reguliavimo eiga: 580 mm, NC ašis, bepakopis > Veleno apsukos: 2.800-4.000 aps./min > Įrankio skersmuo: 380-400 mm > Priešpriešinė atrama, visa tvirtinimo ilgis fiksuojama 2. Tekinimo ir pjovimo frezos velenas ..... > Įrankių skaičius: kintamas > Variklio galia: 15 kW > Veleno skersmuo: 50 mm > Įrankio tvirtinimo ilgis: 640 mm, su atrama > Ašinė reguliavimo eiga: 580 mm, NC ašis, bepakopis > Veleno apsukos: 2.800-4.000 aps./min > Įrankio skersmuo: 380-400 mm > Priešpriešinė atrama, visa tvirtinimo ilgis fiksuojama Perdavimo juosta ..... Dalių perdavimui į išilginį apdirbimą, įskaitant detalių atskyrimą prieš pateikiant į išilginį apdirbimo skyrių. 1. Profilinė frezos galvutė (lygiagrečiai ir priešpriešiai sukinėjančios) ..... > Padėtis: vertikaliai dešinėje > Įrankių skaičius: kintamas > Variklio galia: 11 kW > Veleno skersmuo: 50 mm > Įrankio tvirtinimo ilgis: 400 mm, su atrama > Ašinė reguliavimo eiga: 350 mm, NC ašis, bepakopis > Radialinė reguliavimo eiga: 80 mm, NC ašis, bepakopis > Veleno apsukos: 6000 aps./min > Įrankio skriejimo skersmuo min.: 140 mm > Įrankio skriejimo skersmuo maks.: 232 mm 2. Profilinė frezos galvutė ..... > Padėtis: vertikaliai dešinėje Hfodpfeyrtzksx Afteh > Įrankių skaičius: kintamas > Variklio galia: 11 kW > Veleno skersmuo: 50 mm > Įrankio tvirtinimo ilgis: 400 mm, su atrama > Ašinė reguliavimo eiga: 350 mm, NC ašis, bepakopis > Radialinė reguliavimo eiga: 80 mm, NC ašis, bepakopis > Veleno apsukos: 6000 aps./min > Įrankio skriejimo skersmuo min.: 140 mm > Įrankio skriejimo skersmuo maks.: 232 mm 3. Profilinė frezavimo agregatas (įlaidos pjovimo įrenginys iš viršaus) ..... > Padėtis: horizontaliai viršuje > Variklio galia: 3,0 kW > Veleno skersmuo: 40 mm > Įrankio tvirtinimo ilgis: 40 mm > Ašinė reguliavimo eiga: 30 mm, NC ašis, bepakopis > Radialinė reguliavimo eiga: 125 mm, NC ašis, bepakopis > Veleno apsukos: 90...

Būklė: nepatikrintas (naudotas), Grooving spindle 2 pcs. Number of milling units: 7 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 12 with radial and axial NC spindles, plus VARIO table and trimming carriage ..... Machine professionally dismantled and in stock at our warehouse in 73447 Oberkochen. Video and photos were taken before dismantling. Technical Data Summary (Please inquire about any additionally included accessories) ..... Hfedpfsx H Al Nex Aftoh Cross-cut saw ..... > Cross-cut saw electronic, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.7 kW > Laser guideline for cutting section recognition > Axial adjustment travel: 150 mm NC axis, electronically infinitely adjustable > Radial adjustment travel: pneumatic, 8 positions for e.g. top edge rounding Rounding unit ..... > Position: horizontal, bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Maximum tool diameter: 130 mm > Axial adjustment mechanically linked to cross-cut saw > Radial adjustment pneumatically controlled On/Off electronic length stop ..... > Length: 4500 mm 1st Tenoning and Grooving Spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment travel: 580 mm NC axis, infinitely adjustable > Spindle speed: 2,800 rpm > Maximum tool diameter: 400 mm > Anti-spin counter, full clamping length is countered 2nd Tenoning and Grooving Spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment travel: 580 mm NC axis, infinitely adjustable > Spindle speed: 2,800 rpm > Maximum tool diameter: 400 mm > Anti-spin counter, full clamping length is countered Transfer belt ..... For transferring parts to the longitudinal processing unit, including double-part singulation before infeed into the longitudinal processing. 1st Profiling Spindle (Climb and Counter Direction) ..... > Position: vertical, right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment travel: 350 mm NC axis, infinitely adjustable > Radial adjustment travel: 80 mm NC axis, infinitely adjustable > Spindle speed: 6,000 rpm > Min. tool cutting circle: 140 mm > Max. tool cutting circle: 232 mm > 2 feed rollers opposite spindle, axially pneumatically controlled, 8 positions > Table plate pneumatically controlled to tool diameter 2nd Profiling Spindle ..... > Position: vertical, right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment travel: 350 mm NC axis, infinitely adjustable > Radial adjustment travel: 80 mm NC axis, infinitely adjustable > Spindle speed: 6,000 rpm ...

Būklė: dilaminuotas dirbtuvėje (naudotas), Slotted Spindle 1 pc Number of Milling Units: 4 pcs Spindle Diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 10 CNC – spindles CNC-controlled radially and axially --- The machine was factory-refurbished by Weinig in 2024. During this process, the control system was upgraded to Siemens S7 677 C with a new “touch” membrane panel. Equipped with the following processing units: Crosscut Saw --- with laser guide light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 rpm axial adjustment via NC axis radial adjustment pneumatically across 8 positions for edge rounding from above Edge Rounding Unit from Below --- Axial adjustment paired with crosscut saw Tenoning and Mortising Spindle --- motor power 15 kW spindle diameter 50 mm spindle speed 2,925 rpm minimum tool cutting circle 380 mm, maximum 400 mm tool clamping length 640 mm axial adjustment CNC axis axial adjustment stroke 580 mm adjustment speed 100 mm/sec 1st Profile Spindle (Conventional and Climb Milling) --- motor power 11 kW Hedpfx Asxpi Dueftefh spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis 2nd Profile Spindle --- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis Horizontal Profiling Unit, Upper --- motor power 3 kW spindle diameter 40 mm spindle speed 9,000 rpm pneumatic adjustment over 8 positions axially and radially Vertical Profiling Unit, Right at Machine End --- motor power 3 kW spindle diameter 40 mm spindle speed 5,850 rpm pneumatic adjustment over 8 positions axially and radially Additional Equipment --- CNC-controlled length stop, mounted on the slotting table for lengths up to 3,500 mm, incl. positioned crosscut saw integrated into the control Window mullion cutting unit, swivels 60° both sides double-part handling package with automatic singling and transfer feed-in device with window automation for rebating rebate carriage for rebating narrow sash widths climate control unit in the switch cabinet PC control NEXUS automatic turning system lamella conveyor, including return conveyor for transporting workpieces back to the operator (Technical data according to manufacturer – subject to confirmation).

Būklė: nepatikrintas (naudotas), Slot spindle 2 pcs. Number of milling units: 5 Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 10 NC window system optionally available with extensive tooling ----- Optionally available (at additional cost): IV 68 timber, timber/aluminum IV 78 timber, timber/aluminum IV 68 entrance doors Technical manufacturer description: ----- Pos. 1: Weinig Unicontrol 10 NC window system ----- Crosscut saw ----- with laser guide light, motor power 3 kW, spindle diameter 40 mm, spindle speed electronically adjustable with brake 3,000-6,000 rpm. Maximum tool swing diameter: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment: pneumatic, 8 positions for edge rounding from above Horizontal rounding unit (bottom) ----- Axial adjustment mechanically coupled with crosscut saw 1st tenoning and slotting spindle ----- Motor power with brake: 15 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Maximum tool swing diameter: 400 mm Tool clamping length: 640 mm Axial adjustment: NC axis Default position below table: 5-10 mm Radial adjustment: fixed 2nd tenoning and slotting spindle ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Maximum tool swing diameter: 400 mm Tool clamping length: 320 mm Hfsdpfx Aozawizefteh Axial adjustment: NC axis Radial adjustment: NC axis Default position below table: 5-10 mm 1st profiling spindle (climb and conventional milling) ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool swing diameter: 140 mm Maximum tool diameter: 232 mm Tool clamping length: 400 mm with counter bearing Axial adjustment: 350 mm, NC axis Radial adjustment: NC axis Default position below table: 5-10 mm 2nd profiling spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool swing diameter: 140 mm Maximum tool diameter: 232 mm Tool clamping length: 400 mm with counter bearing Axial adjustment: 350 mm, NC axis Radial adjustment: NC axis Default position below table: 5-10 mm Horizontal top profiling unit ----- Motor power with brake: 3.0 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 5,850 rpm Maximum tool swing diameter: 130 mm Adjustment pneumatic, 8 positions axial and radial 3rd profiling spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool swing diameter: 140 mm Maximum tool diameter: 232 mm Tool clamping length: 400 mm with counter bearing Axial adjustment: 350 mm, NC axis Radial adjustment: NC axis Default position below table: 5-10 mm Vertical profiling unit (right, at machine end) ----- Motor power with brake: 3.0 kW Spindle diameter: 40 mm Clamping length: 160 mm Spindle speed: 5,850 rpm Maximum tool swing diameter: 210 mm Adjustment pneumatic, 8 positions axial and radial Additional equipment -----...

Būklė: nepatikrintas (naudotas), Šlifuojamoji špindelė 1 vnt. Frezuojančių agregatų skaičius: 5 vnt. Špindelio skersmuo: 50 mm Valdymas: Weinig PC-Nexus Weinig Unicontrol 11 langų gamybos linija su plačia įrankių komplektacija ----- Pasirenkamai (už papildomą kainą): - Weinig Univar 6 išfalcavimo staklės (kaina pagal užklausą!) - Götzinger PowerDrill gręžimo ir frezavimo centras langams ir durims (kaina pagal užklausą) Techninis gamintojo aprašymas: ----- Poz. 1: Weinig Unicontrol 11 langų gamybos linija ----- Įskaitant esamus įrankius - IV 67 mediniai ir medžio-aliuminio langai - IV 77 mediniai ir medžio-aliuminio langai - IV 90 mediniai langai Pjovimo pjūklas ----- Su lazerio linijos nuoroda, variklio galia 3 kW, špindelio skersmuo 40 mm, Špindelio apsisukimų dažnis elektroniniu būdu reguliuojamas su stabdžiu 3.000–6.000 aps./min. Įrankio skrydis maks. 400 mm Ašinė eiga: 150 mm per NC ašį Radialinė padėtis pneumatiškai valdoma 8 pozicijomis viršutiniam kampų užapvalinimui Horizontalus apvalinimo agregatas apačioje ----- Variklis su stabdžiu: 1,5 kW, špindelio skersmuo 20 mm, įtempimo ilgis 25 mm, Apsisukimai: 9.000 aps./min. Įrankio skrydis maks. 130 mm Ašinis judėjimas mechaniškai susietas su pjovimo pjūklu Radialinė eiga valdoma pneumatiniu būdu Kaiščių ir išilginio frezavimo špindelė ----- Su hidrauliniu priešpriešiniu guoliu Variklio galia su stabdžiu: 15 kW Špindelio skersmuo: 50 mm Špindelio apsisukimai: 2.800 aps./min. Įrankio skrydis maks. 400 mm Įrankio įtempimo ilgis 640 mm Ašinė eiga NC ašis Bazinis aukštis po stalu: 5-10 mm Radialinė eiga: fiksuota 1. Profilinė špindelė (sukimas į priekį ir atgal) ----- Variklio galia su stabdžiu: 11 kW Špindelio skersmuo: 50 mm Špindelio apsisukimai: 6.000 aps./min. Įrankio skrydis min. 140 mm, maks. 232 mm Įrankio įtempimo ilgis 400 mm su priešpriešiniu guoliu Ašinė eiga 350 mm (NC ašis) Radialinė eiga (NC ašis) Bazinis aukštis po stalu: 5-10 mm 2 padavimo volai priešais špindelį, ašinė eiga pneumatiniu būdu valdoma, 8 pozicijos Profilinio frezavimo agregatas horizontalus viršuje ----- Variklio galia su stabdžiu: 3,7 kW Špindelio skersmuo: 40 mm Įtempimo ilgis: 40 mm Špindelio apsisukimai: 9.000 aps./min. Įrankio skrydis maks. 130 mm Ašinė ir radialinė eiga pneumatiniu būdu valdoma 8 pozicijose 2. Profilinė špindelė ----- Variklio galia: 11 kW Špindelio skersmuo: 50 mm Špindelio apsisukimai: 6.000 aps./min. Įrankio skrydis min. 140 mm, maks. 232 mm Įrankio įtempimo ilgis 400 mm su priešpriešiniu guoliu Ašinė eiga 350 mm (NC ašis) Radialinė eiga (NC ašis) Bazinis aukštis po stalu: 5-10 mm Valdomas kreipiamasis liniuotė su skersine atrama 2 padavimo volai priešais špindelį, ašinė eiga pneumatiniu būdu valdoma, 8 pozicijos Vertikalus profilinio frezavimo agregatas dešinėje mašinos gale ----- Variklio galia su stabdžiu: 3,7 kW Hodpfx Afey T R Tustefh Špindelio skersmuo: 40 mm Įtempimo ilgis: 160 mm Špindelio apsisukimai: 5.850 aps./min. Įrankio skrydis min. 112 mm, maks. 210 mm Ašinė ir radialinė eiga pneumatiniu būdu valdoma 8 pozicijose Profilinio frezavimo agregatas horizontalus apačioje ----- Variklio galia su stabdžiu: 3 kW Špindelio skersmuo: 40 mm Įtempimo ilgis: 125 mm Spi...

Būklė: naudotas, Gamybos metai: 1993, Įrankiai IV 68, 78 ir kultūros paveldo apsauga. Gręžimo ir griovimo velenas – 3 įrankiai, variklis 7,5 kW. Profilinis velenas – 3 įrankiai, variklis 5,5 kW. Hfedsy Hrrxjpfx Aftjh

Būklė: naudotas, Used control cabinet from a Weinig Unicontrol 6, suitable as a source for spare parts or for building a new control cabinet. Contents include, among others: - Hilger & Kern brake device Hodpfxjt Na Drs Aftsfh - Rathgeber transformer, type ET 1000.

Būklė: labai geros būklės (naudotas), WEINIG Window Production Line, Unicontrol 6, S/N 035-823, Year 1997 Crosscut saw, pneumatically indexed (3 kW) with laser guiding light Slot spindle 50 x 320 mm for 4 tools of 80 mm each – 11 kW motor Parallel spindle 50 x 120 mm – 7.5 kW motor Longitudinal profiling spindle 50 x 320 mm for 4 tools of 80 mm each – 11 kW motor Hardware fitting spindle, pneumatically indexed, 40 x 160 mm – 3 kW motor Saw/grooving spindle, horizontal at the top, pneumatically indexed – 3 kW motor Feed adjustable from 6–12 m/min. – 1.1 kW motor Hedey Dud Ejpfx Aftefh Screen control for 99 window types Support rail for glazing bar production, pneumatically indexed Special window setup with digital angle display Length stop up to approx. 3,500 mm Rebating unit with support rail Return transport device to machine operator Complete machine with operating instructions, circuit diagrams, spare parts lists LEITZ tool set, IV-78 THE SYSTEM IS IN VERY GOOD TECHNICAL AND VISUAL CONDITION Delivery: EXW Lead time: promptly after arrangement Inspection: by appointment Payment: Upon notification of readiness for dispatch Errors and prior sale excepted.

Būklė: naujas, Velenų skaičius: 6 vnt. Darbinis plotis: 250 mm Obliavimo aukštis: 150 mm Lyginimo stalo ilgis: 2500 mm Padavimo variklis: 4 kW Padavimo greitis: 6–24 m/min. Svoris: 4770 kg Matmenys (Ilgis/Plotis/Aukštis): 4722x1860x1776 mm Keturių pusių obliavimo staklės Kuper SWT XL-6, langų versija su elektroniniu ašių bei radialiniu velenų reguliavimu. Hodpfx Ajvnv Ubsftefh Tvirta, nedeformuojama ir žemo vibracijos lygio staklių bazė. Velenų skaičius: 6 Darbinis plotis: 250 mm Darbinis aukštis: 150 mm Lyginimo stalo ilgis: 2500 mm Veleno apsukos: dažnio valdomos 4000–8000 aps./min. Padavimo greitis: 6–24 m/min Išsamesnį aprašymą rasite pridėtame PDF faile! (Techniniai duomenys pagal gamintoją – be garantijos!)

Būklė: naudotas, Gamybos metai: 2000, Complete production line for the manufacture of slatted bed bases. From timber processing to final assembly/packaging. Including all components such as moulders, saws, profile processing, forklifts, compressors, etc. The major machines/lines are from around the year 2000. Comprising: Solid wood rail production - 2 x multi-blade saw RAIMANN KR 450 + KS 310 - Optimizing crosscut saw GRECON ILLERTISSEN OPTICUT 704R - Four-side planer WEINIG HYDROMAT 23 - Stacking unit Foiling/Finishing of longitudinal rails: - 2 x profile wrapping machine FRIZ OPTIMA PU25-PAP - Film cutting machine FRIZ FSM 1500 CNC drilling and sawing systems - KOCH drilling and sawing line with turning and stacking unit - ISE CNC drilling and sawing line with stacking unit - 2 x ISE CNC woodworking centre / drilling machines - ISE CNC slat tenoning/framing machine - 2 x manual slat drilling machines Single machines - GANNOmat CNC drilling and dowel inserting machine - Pnahans spindle moulder - 2 x EiMa double mitre saw - SCM panel saw - Barth frame press - 2 x FLOTT column drilling machines - SAMCO combination saw and spindle moulder - 2 x multi-spindle drilling machines - 2 x belt sanders - Paint spray booth - Various small machines Assembly - Automated assembly system for standard slatted frames - Cap pressing machine/line - 14 x pneumatic assembly tables Logistics - factory equipment Hfsdpfx Asx S Sb Dofteh - 3 x LINDE forklift trucks E16 / E20 - 7 x LINDE reach trucks / electric pallet trucks - WEYCOR wheel loader 95E SUPER - Atlas-Copco compressor system - WEIMA single-shaft shredder - Kärcher ride-on sweeper - HONDA snow blower - Extraction plant for outside yard - Batch of mesh box pallets + Euro pallets - Various shelving systems Packaging - Shrink tunnel machine - Stationary pallet wrapper - Mobile pallet wrapper Stock - Remaining stocks of timber / spring slats - Remaining stocks of end caps / plastic parts - Remaining stocks of various assembly material Many further PHOTOS and exact DATA available on request.

Būklė: naudotas, Complete production line for the manufacture of slatted bed bases. From timber processing to final assembly/packaging. Including all components such as moulders, saws, profile processing, forklifts, compressors, etc. The major machines/lines are from around the year 2000. Comprising: Solid wood rail production - 2 x multi-blade saw RAIMANN KR 450 + KS 310 - Optimizing crosscut saw GRECON ILLERTISSEN OPTICUT 704R - Four-side planer WEINIG HYDROMAT 23 - Stacking unit Foiling/Finishing of longitudinal rails: - 2 x profile wrapping machine FRIZ OPTIMA PU25-PAP - Film cutting machine FRIZ FSM 1500 CNC drilling and sawing systems - KOCH drilling and sawing line with turning and stacking unit - ISE CNC drilling and sawing line with stacking unit - 2 x ISE CNC woodworking centre / drilling machines - ISE CNC slat tenoning/framing machine - 2 x manual slat drilling machines Single machines - GANNOmat CNC drilling and dowel inserting machine - Pnahans spindle moulder - 2 x EiMa double mitre saw - SCM panel saw - Barth frame press - 2 x FLOTT column drilling machines - SAMCO combination saw and spindle moulder - 2 x multi-spindle drilling machines - 2 x belt sanders - Paint spray booth - Various small machines Assembly - Automated assembly system for standard slatted frames - Cap pressing machine/line - 14 x pneumatic assembly tables Logistics - factory equipment - 3 x LINDE forklift trucks E16 / E20 - 7 x LINDE reach trucks / electric pallet trucks - WEYCOR wheel loader 95E SUPER - Atlas-Copco compressor system - WEIMA single-shaft shredder - Kärcher ride-on sweeper - HONDA snow blower - Extraction plant for outside yard - Batch of mesh box pallets + Euro pallets Hodpsx S Scbjfx Aftefh - Various shelving systems Packaging - Shrink tunnel machine - Stationary pallet wrapper - Mobile pallet wrapper Stock - Remaining stocks of timber / spring slats - Remaining stocks of end caps / plastic parts - Remaining stocks of various assembly material Many further PHOTOS and exact DATA available on request.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1989, Funkcionalumas: visiškai funkcionalus, WEINIG Unicontrol UC 10-5 Window Manufacturing Machine 1. Electronically controlled cross-cut saw with laser-guided switching from saw cutting to zero-point wheel, 3 kW motor 2. Grooving spindle 50 x 630 mm for 6 x 80 mm tools, 15 kW motor 3. Longitudinal/profile spindle (synchronous) 50 x 320 mm for 4 x 80 mm tools, 11 kW motor 4. Grooving spindle (between the 1st and 2nd lifting spindle) D = 40 x 40 mm, axially indexed, 3 kW motor 5. Longitudinal profiling spindle 50 x 320 mm for 4 x 80 mm tools, 11 kW motor Hfsdsxmr N Ijpfx Aftjh 6. Longitudinal profiling spindle 50 x 320 mm for 4 x 80 mm tools, 11 kW motor 7. Clamping spindle 40 x 150 mm, axial cycle: 3 positions, radial cycle: 2 positions, 3 kW motor Right-side saw and grooving spindle, 3 kW motor Fitting spindle 40 x 150 mm, 3 kW motor Adjustable feed 6-12 m/min, 1.1 kW motor 4-position counter changer Electronic length stop 3600 mm Workpiece return via automatic rotating system Automation package Interval-controlled sash support Double parts package Laminate fabric tabletops (for sanded surfaces) Left-side pressure guide, max. timber width difference 100 mm Machine in very good technical and visual condition

Būklė: labai geros būklės (naudotas), Catalogue number: 7289 TECHNICAL DATA - Maximum workpiece width: 230 mm - Maximum workpiece height: 170 mm 6 spindles: Hjdpfx Afjy N Ahietjfh 1) Bottom horizontal: 230 mm, 5.5 kW 2) Right vertical: 170 mm 3) Left vertical: 170 mm (spindle 2 & 3) 11 kW 4) Top horizontal: 230 mm, 11 kW 5) Top horizontal: 230 mm, 7.5 kW 6) Bottom horizontal: 230 mm, 11 kW - All spindles adjustable up/down, right/left - Spindles 4 and 5 electrically adjustable up/down - Spindle speed: 8,000 rpm - Spindle diameter: 40 mm - All spindles fitted with electric brake - 6 top infeed, feed, toothed rollers, including 1 double - Top outfeed, feed, rubber, double roller - Bottom outfeed, feed, rubber, double roller - Side pressure - Feed on Cardan shafts - Pneumatically pressed rollers - Stepless feed speed adjustment: 6–24 m/min - Feed motor: 4 kW - Electric thickness adjustment - Body lifting motor: 0.55 kW - Central table lubrication - Extraction outlets diameter: 6 x 140 mm - Dimensions (L x W x H): 4900 x 2400 x 2000 mm - Weight: approx. 4000 kg ADVANTAGES – German-made, WEINIG brand – With 6 cutterheads – Unpainted – Used thicknesser/planer, very good condition Original photos Net price: 142,900 PLN Net price: 34,000 EUR (based on exchange rate 4.2 EUR) (Prices may vary depending on rate fluctuations)

Būklė: naudotas, Gamybos metai: 1998, Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: 83406, Langų apdirbimo centras Weinig Unicontrol 10, pagaminimo metai 1998 Hedpfx Afjy Sxlpjtsfh

Būklė: naudotas, Parduodama mašina su visais nuotraukose matomais įrankiais. Hsdpfx Asy Rumtoftofh

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, Unicontrol 12 Consisting of: cut-off saw unit (Pos. A), tenoning and slotting spindle (Pos. C), transfer belt (Pos. I), profiling spindle (Pos. L), profiling spindle (Pos. N), vertical profiling/router unit right (Pos. P). For manufacturing individual parts and elements in frame-based or series production. Comprises a cross-processing unit and a longitudinal-processing unit connected by a transfer belt. Working width: 40–140 mm (see pressure fence left 40–140 mm) Working height: 40–120 mm Workpiece length min.: approx. 275 mm + 1 x end profile length Longitudinal processing: approx. 220 mm + 2 x end profile length Workpiece length max.: 3,500 mm The part dimensions depend on the machine configuration, production method, and tooling setup. A final definition of part dimensions is only possible after receipt, inspection, and approval of the complete and finalized setup drawings. Cross-processing: Table feed motor power: 0.3 kW (0.4 HP) Hfsdpfxoumci Sj Afteh Feed speed preset for sawing, profiling, and return: 3–25 m/min Vario table (studio window production possible) The clamping length of all tenoning and slotting spindles can be used without tool-free clearance. Workpiece clamping by means of a clamp bridge. Actuated by a clamping cylinder installed under the table. Long stop: NC-controlled, mounted on the slotting table. Studio window feature, swiveling angle max.: +/- 75° The minimum workpiece length for angled windows depends on the angle and the wood width. Possible part dimensions for studio window (angled) production: Angle Max. working width Min. workpiece length +/-75° 80 mm 800 mm +/-70° 120 mm 490 mm +/-60° 240 mm 360 mm +/-90° 350 mm 185 mm For angles greater than 60°, only counter-processing Commissioning not documented 1) NC angle adjustment automatic for processing angled parts Splinter guard by follow-up counter along the entire spindle length of the tenoning and slotting spindle for 90° machining. Manually adjustable counter wood strip for processing angled parts 2) Additional counter wood pieces

Būklė: naudotas, Unit 10 Spindle diameter: 40 and 50 mm Motor: 1 x 15 kW, 4 x 11 kW, 5 x 3 kW Weinig Unicontrol 10 (UC 10) angle processing system for the production of windows, components, and doors. Suitable for frame-by-frame, batch, or single part manufacturing, featuring 2 tenoning and mortising spindles, including Oertli tool set. - Units: 1. Crosscut saw, NC axis, 3 kW, ø 40 mm, 2,800 rpm 2. First tenoning and mortising spindle, NC axis, ø 50 mm, 15 kW, clamping length: 640 mm (8 x 80 mm) 3. Second tenoning and mortising spindle, NC axis, ø 50 mm, 11 kW, clamping length: 400 mm 4. Profiling spindle 1, NC axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 5. Profil milling unit, horizontal from above, 3 kW 6. Profiling spindle 2, NC axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm Hedpfx Afov Ag Tdjtefh 7. Profiling spindle 3, NC axis, ø 50 mm, 11 kW, clamping length: 400 mm 8. Profil milling unit, vertical right, 3 kW 9. Profil milling unit, vertical right from above, 3 kW 10. Profil milling unit, horizontal from below, NC axis, 3 kW - Double piece package - Re-milling package with re-milling carriage - Automatic turning system - PC control NEXUS - CNC controlled length stop - Set-up for studio windows - Unit for rounding edges from below with crosscut saw - Glazing bar support rail - Including extraction pipe system - Including Oertli tool set - Further technical data and tool drawings available on request.

Būklė: naudotas, Gamybos metai: 2000, Sandėlio vieta: Nattheim Hedpfxovwdmwe Aftjfh