Robotechnik Europe Vaflių Šlapio Apdorojimo Įrenginys pirkti naudotą (28 606)

Būklė: paruoštas naudoti (naudotas), Įrenginys drėgnam cheminiui apdorojimui: waferiai iki 12 colių, substratai iki X/Y 9in/9in, atskiras korpusas, proceso moduliai, PP proceso kamera, 2 programuojamos terpės rankos, apsisukimų greitis 1-4000 aps./min, įsibėgėjimo rampa 1-3000 aps./min, sukimosi laikas 1-999 s, ištraukimas: proceso dubuo 2x DN110, kamera 2x DN110, korpusas 1x DN110, valdymas 1x DN110 (po 200 m³/h), CDA 8+/-2 bar, vakuumas -0,8+/-0,2 bar, azotas 4,0+/-0,5 bar, 3 terpės nutekėjimai, atliekų dėžė 2 koncentratų atliekoms, reagentų dėžė su slėginiu indu, 4 Julabo termostatinės vonios. Įranga išardyta demontuojant. Apžiūra galima susitarus. Iiodpjxzii Usfx Aauea

Būklė: geras (naudotas), Franz Haas Wafer Stick Baking Oven Model EWB 1/1 after complete overhaul. The machine is made of ASIS 304 stainless steel (main frame is carbon steel). The oven is equipped with a rotating ring, which can be speed-adjusted to achieve the desired type of wafer bake. The ring has been cleaned and aligned (centered), supports/bearings are new. Fans have been replaced with new ones. New chimney outlet with flange for quick installation. Iijdoywgaxopfx Aauja The machine is fitted with two extruders with sleeves for shaping the strip and for the wafer stick diameter. Equipped with a pneumatic cylinder knife with photocell for precise cutting (length of the stick adjustable). The oven features a stainless steel batter tank with a frame and trolley. The oven is equipped with pumps that feed batter from the tank onto the ring surface. Fitted with a new control panel and new gas reducer. The speed of the ring and pumps is controlled via frequency inverters. Dimensions: length 3200 mm, width 1400 mm, height 1700 mm. The machine is gas-powered, natural gas family, high-methane type, code E (formerly GZ 50). Power supply 3x400V / 16A Consumption approx. 2.5/3 kWh The machine has been fully refurbished. All thermal components were replaced with new, eco-friendly versions—lower gas consumption and higher efficiency. Output: approx. 120–150 kg/8 h

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, Parts Cleaning Machine / Combination Spray Cleaning System Type L101 HP Automatically operating hot water parts washing machine with basket drive via geared motor, stainless steel washing pump (manufacturer: Lowara), spray system with stainless steel nozzles. Additionally, manual cleaning with a high-pressure nozzle (60 bar) and foot switch, air blow gun, large viewing window with gauntlet gloves, LED interior lighting. - Basket diameter: 910 mm - Useful height: 490 mm Iedpfx Aaed R Ahleusia - Max. load weight: 200 kg - Spray pressure (washing pump): 2.3 bar - Spray pressure (HP pump): adjustable up to max. 60 bar - Tank volume: 175 liters - Heating: electrically adjustable (RT - 60°C) - System dimensions (LxWxH): 1,300 x 1,500 x 2,100 mm - Empty weight: approx. 200 kg ++ Wash timer freely adjustable (minutes and hours) ++ Complete cleaning machine (interior and exterior paneling) made of stainless steel 1.4301 ++ Water circulation and loading basket made of stainless steel 1.4301 ++ Bath cover with fine filter (2,000 micron) ++ Operating hours counter ++ Steam extraction including condensate return ++ Omron timer for time setting in sec./min./hrs. OTHER BASKET DIMENSIONS AVAILABLE ON REQUEST!!!

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, 1,0 vnt. naudotas vaizdų apdorojimo matavimo įrenginys Gamintojas: MITUTOYO Tipas: QS200Z Pagaminimo metai: 2011 Iijdpfeyxxy Tox Aauja Techniniai duomenys – žr. nuotraukas.

Gamybos metai: 2023, būklė: paruoštas naudoti (naudotas), Yra palyginti nauja Corona išankstinio apdorojimo įranga vienpusei aliuminio folijos dengimui. Medžiaga: aliuminio folija, paskirtis: dengimas, dengiamos pusės: 1, tinklelio plotis: 1350 mm, apdorojimo plotis: 1450 mm, apdorojimo greitis: 3 m/min, volo skersmuo: 125 mm, volo ilgis: 1550 mm, generatoriaus tipas: Softal 9030, generatoriaus galia: 3 kW. Bendri įrenginio matmenys (X/Y/Z): apie 2000 mm/1550 mm/1700 mm, svoris: apie 1500 kg. Komplekto sudėtyje yra ozono ištraukimo sistema RD 4. Yra dokumentacija. Galima apžiūra vietoje. Iijdpfoyrta Hjx Aausa

Gamybos metai: 1999, būklė: paruoštas naudoti (naudotas), Siūloma Ferrarini & Benelli Corona išankstinio apdorojimo įranga, skirta nelaidžių medžiagų paviršiaus aktyvavimui tęstiniuose gamybos procesuose. Generatorius: C15/4N, išėjimo dažnis: 15 kHz, elektrodų tipas: daugiacilindriniai volelių elektrodai, maks. apdorojimo plotis: 200 mm. Galima apžiūra vietoje. Isdpfx Aajyn N Avsujia

Gamybos metai: 2015, būklė: paruoštas naudoti (naudotas), Yra AFS koronos paruošimo įrenginys. Galingumas: 10 kW. Dokumentacija yra. Galima apžiūra vietoje. Iisdpfx Aoyn N A Aeausa

Būklė: naudotas, Gamybos metai: 2004, Overview This labelling machine was manufactured in 2004 by the German company GERNEP. The model Labetta 4/3/12 784 2A 3SK is equipped with two wet glue labelling stations and three self-adhesive labelling stations, offering flexible labelling configurations for a wide variety of bottle types. The machine has a capacity of 8,000 bottles per hour and is available immediately. Technical Data Capacity: 8,000 bottles per hour (6,500 bottles per hour with photoelectric orientation) Number of bottle plates: 12 Number of labelling stations: 5 Station 1: Wet glue, label height 330 mm, steel glue roller Station 2: Wet glue, label height 230 mm, steel glue roller Stations 3-5: Self-adhesive Orientation: Photoelectric bottle orientation via closure Iisdpfx Aswh U D Tjauja Prepared for cam-based bottle orientation Electric height adjustment Operating voltage: 400 V Frequency: 50 Hz Control system: Siemens S7-200, Touch TD integrated Rotation direction: Right to left Scope of delivery GERNEP Labetta 4/3/12 784 2A 3SK labelling machine Integrated control system (Siemens S7-200 with Touch TD) Machine protection housing with hinged doors and lifting gates

Būklė: naudotas, Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 4 000 mm, bendras ilgis: 7 100 mm, bendras plotis: 8 100 mm, temperatūra: 80 °C, šildymo galia: 116 kW (157,72 AG), Įranga: kabina, Pilna šlapio dažymo įranga su išplėtimo zona, šlapio dažymo kabina, maišymo kabina, džiovinimo krosnimi ir atvėsinimo zona. Įranga dar galima apžiūrėti Dieste. Daugiau informacijos priede arba pagal užklausą. - Matmenys: Išoriniai LxPxA = 8.100 x 7.100 x 4.000 mm, vidiniai = 8.000 x 7.000 x 3.950 mm. - Aukštis iki apatinės bėgio dalies – 3.740 mm nuo grindų lygio. - Bendros slankiosios durys su dažymo kabina. - Krosnies išėjimo slankiosios durys: PlxA = 1.200 x 3.800 mm, su vienu langu, dvi varčios. Isdpfex H Rhrsx Aauoia - Avarinės durys su langu šoninėje sienoje, PlxA = 800 x 1.900 mm, savaime užsidarančios su durų uždarytuvu ir laikikliu. Avarinės durys su sandarinimo gumomis, didelio diametro ir ypač elastingo EPDM tipo. - Sienų tipas: vertikalios dvigubos sumuštinių plokštės, užpildytos mineraline vata, 55 mm storio. Įskaitant apšvietimą, ventiliacijos grupę, valdymo pultą ir visą monobėgių sistemą iki atvėsinimo zonos ir per visą įrangą.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2019, A printing, laminating, and coating line (Corona pre-treatment) from AFS is available. Roller width: 2700 mm, electrode width: 2500 mm, maximum mechanical speed: 250 m/min, maximum generator output: 6 kW, operating mode: single- and five-core operation, electrode material: ceramic, discharge roller: ceramic, cooling type: water-cooled, pressure rollers: double-sided. Documentation available. On-site inspection possible. Iodpfx Aajvrip Heujia

Būklė: geras (naudotas), Ultrafilter ultraaqua autoclean 0016 AC Donaldson Ultrafilter ultrafiltration system for compressed air compressor condensate Oil/Water Separator for Compressed Air Condensate ● Treatment system for separating compressed air condensate and condensates with difficult separation characteristics (e.g., stable emulsions) using cross-flow filtration ● Physical separation principle guarantees residual oil content of < 5 mg/l in the water ● Intelligent control concept with programmable controller for reliable system operation, including plain text display via text display, Iedpfxoidx Uij Aausia fault monitoring via alarm signals with potential-free contacts and optional external network connection ● Optimized cleaning by comparing input/output extends maintenance intervals and reduces operating costs ● Thermally and chemically highly resistant ceramic membrane with long service life ● Freeze protection with integrated heater ● High-quality, corrosion-resistant materials for tanks, pipelines, pumps, seals, and valves Manufacturer: Donaldson Ultrafilter System type: ultraaqua autoclean 0016 AC Electrical data: 3 x 380 V, 50 Hz, 2.6 kW Compressed air: pmin: 5.5 bar, pmax: 8.5 bar, Pneurop 4 Water: pmax: 5 bar Membrane: pHmin: 1, pHmax: 11, tmin: 5°C, tmax: 70°C Financing through our bank is also available. komplett-konzept.leasingo.de Further filtration systems in various sizes – new and used – can be found in our shop! International shipping rates on request!

Būklė: paruoštas naudoti (naudotas), Šlapiojo apvoliojimo įrenginys Juostos plotis 30 cm Iisdpfxeykkvis Aausa Matmenys: 250x100x125 cm Patikrinta dirbtuvėse, veikianti būklė Juosta šone šiek tiek pažeista, veikia, tačiau ateityje reikės keisti juostą Parduodama be garantijos ir be grąžinimo galimybės

Būklė: paruoštas naudoti (naudotas), NN šlapias paniravimo aparatas, patikrintas dirbtuvėse, veikia. Juostos plotis 40 cm. Matmenys 230x110x125 cm. Parduodama be garantijos ir be grąžinimo galimybės. Iodpfx Aaeykkrqjuoia

Būklė: naujas, The Brugger SA38 saw-splitter impresses with a powerful splitting force of 12 tonnes, making it the ideal solution for quickly and efficiently turning logs into premium firewood. Logs with a diameter of up to 38 cm can be effortlessly processed into firewood. The SA38 stands out thanks to its simple yet well-engineered design, which ensures high reliability while also making maintenance and repairs straightforward. Technical Data • Up to 38 cm log diameter • 12-tonne splitting force • 50 cm Oregon bar • Log length: 20 – 50 cm • Optional log lifter or chain conveyor available • Weight: 450 kg Iisdpfx Aaopz I I Hjuja Depending on your individual requirements, various drive options are available, including a powerful 14 HP Kohler petrol engine, a 7.5 kW 400V electric motor, or a PTO drive with three-point linkage. Prices Brugger SA38 basic – €5,499 Infeed conveyor 100 cm – €590 Discharge conveyor 350 cm – €895 6-way splitting wedge – €199 Additional PTO drive (for electric or petrol versions): €949 Chain conveyor – €1,898 Log lifter – €1,498

Būklė: naujas, High-Performance Saw-Splitter with 20 Ton Splitting Force – Brugger SA48 Pro! The Brugger SA48 Pro saw-splitter is the ideal solution for fast and effortless processing of logs up to 48 cm in diameter into high-quality firewood. This machine stands out due to its well-thought-out yet simple design, which not only requires minimal maintenance but also makes repairs straightforward. This impressive unit is available with your choice of a powerful 14 HP Kohler petrol engine, a 9.5 kW 400V electric motor, or PTO drive for three-point hitch operation. The SA48 Pro dispenses with electronic controls, relying instead on purely mechanical operation via components such as hydraulic valves with levers. Iijdpfx Aaslu Dc Neuoa Specifications: - Maximum cutting length: 55 cm - Maximum diameter: 48 cm - Splitting force: 20 tons - 55 cm bar - Extra-wide conveyor belt: 3.2 m - Hydraulic infeed up to the chainsaw - Pivoting conveyor belt - Automatic chain lubrication Despite its high splitting force and large diameter capacity, the saw-splitter remains relatively compact. It is equipped with a tow bar, allowing it to be attached to any hitch and easily transported. Additionally, two people can easily move the saw-splitter by hand on a level surface, without always needing a vehicle. Log length can be infinitely adjusted up to 55 cm. The splitting wedge can be positioned up or down in various positions using a hand lever. This allows you to split wood in 2, 4, or even 6 parts depending on log thickness. Optional accessories such as the log lifter or the chain conveyor further ease your workload. Multiple logs can be loaded onto the chain conveyor using a forklift, crane, or front loader, eliminating the need to lift individual logs by hand. The SA27 Pro has been replaced by this improved model, the SA48 Pro. Prices: Brugger SA48 Pro saw-splitter: €9,749 6-way splitting wedge: €199 8-way splitting wedge: €299 Additional PTO drive (for electric or petrol models): €949 Log lifter: €1,498 Chain conveyor: €1,898

Būklė: naujas, High-Performance Firewood Processor with 20 Ton Splitting Force - Brugger SA48 Pro! The Brugger SA48 Pro firewood processor is the ideal solution for quickly and effortlessly processing logs up to 48 cm in diameter into premium firewood. This processor stands out due to its well-thought-out yet simple construction, which not only requires minimal maintenance but also simplifies repairs. This impressive machine can be equipped with your choice of a powerful 14 HP Kohler petrol engine, a 9.5 kW 400V electric motor, or PTO drive for three-point linkage attachment. The SA48 Pro operates entirely mechanically, dispensing with electronic controls and instead using components such as hydraulic valves with levers. Iisdpfx Aaepz I Ncsusa Specifications: - Maximum cut length: 55 cm - Maximum diameter: 48 cm - Splitting force: 20 tons - 55 cm bar - Extra-wide 3.2 m conveyor belt - Hydraulic feed up to the chainsaw - Swivelling conveyor belt - Automatic chain lubrication Despite its high splitting power and large diameter capacity, the firewood processor remains relatively compact. Equipped with a tow bar, it can be attached to any trailer hitch for easy transportation. Additionally, two people can easily move the firewood processor by hand on level ground – a towing vehicle is not always required. The log length can be continuously adjusted up to 55 cm. The splitting wedge can be repositioned up or down using a hand lever, allowing you to split logs in 2, 4, or even 6 pieces depending on wood thickness. Optional accessories, such as the log lifter or chain conveyor, further facilitate operation. Multiple logs can be loaded onto the chain conveyor with a forklift, crane, or front loader, eliminating the need to lift individual logs by hand. The SA27 Pro has been replaced by the improved SA48 Pro. Pricing: Brugger SA48 Pro firewood processor: €9,749 6-way splitting wedge: €199 8-way splitting wedge: €299 Additional PTO drive (for electric or petrol versions): €949 Log lifter: €1,498 Chain conveyor: €1,898

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2010, įėjimo įtampa: 240 V, įvesties srovės tipas: Oro kondicionierius, Rudolph Technologies / Onto Innovation automatinis inline puslaidininkių plokštelių inspekcijos įrenginys AXi 940 b Modelis: AXi940b Iodpfx Aajwgm Eaeusia Lempos darbo valandos:

Būklė: naujas, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✈️ 35-day Delivery ✈️ ✅✅✅Energy Efficiency Class A+++✅✅✅ ►►Buy Now◄◄ ✳️Maintain your liquidity! We offer various financing models to ensure your investment has the greatest chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs.✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST Delivery Time❗ ⌛⏰►►► ✨✨Buy directly from the manufacturer and secure your price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Environmentally Friendly☘️⚡️Green Energy⚡️☘️ Here you will find our latest generation of compact stripping systems! High-quality paint removal tank for gentle removal of coating from aluminum, Made from V4A stainless steel (AISI 316).✨✨✨ Antimagnetic, acid-resistant, and highly robust design for long-term, daily industrial use. Comes with CE certification for all systems, including cover, double-walled and thermally insulated. Digital control with temperature limiter, control box with residual current circuit breaker and digital display, continuously adjustable from 0–110 °C. Four-way adjustable feet for alignment. High-quality ceramic heating element. V4A stainless steel drain valve for fast and effective system cleaning. Emergency stop switch. The listed price is for the smallest standard model. Additional options available on request. ⭐ PAINT STRIPPING TANK – BSK-1200-700*700 Isdpsfw Nvxofx Aausia ✔️ Working dimensions (L/W/H): 1200 x 700 x 700 mm ✔️ External dimensions (L/W/H): 1450 x 950 x 1250 mm ✔️ Interior of tank: V4A stainless steel ✨✨✨ ✔️ Exterior of tank: stainless steel ✔️ Adjustable feet ✔️ Capacity: 832 liters ✔️ Electric heating output: 22 kW/h – 2-stage – Rapid heating ✔️ CE certified ✔️ High-quality V4A stainless steel tubular heating elements ✨✨✨ ✔️ Industrial dampers for easy lid opening and closing ✔️ Outlet via ball valve ✔️ Digital control with temperature limiter and timer ⚙️ Not included in offer, optional extras: ►Stripping cabin (optional) ►Drip tray (optional) ►Crane stand and crane (optional) ►Mixer (optional) ►Piston lid (optional) ►Pneumatic cylinder cover ►Exhaust hood (with ATEX fan) (optional) ►Additional immersion basket ⭐⭐⭐Depending on the chemicals to be used, we also have tank models made from V2A stainless steel (AISI 304ss). Please pay attention when selecting! Ask for the price difference.⭐⭐⭐ Would you like a special configuration❗ Call us now❗ ✅WE OFFER CUSTOM SOLUTIONS, NOT JUST STANDARD SIZES.✅ ✅WE DESIGN, MANUFACTURE, AND INSTALL SPECIFICALLY FOR YOU.✅ ⭐Follow us for new campaigns⭐ ☀️ 2-YEAR WARRANTY ☀️ ☀️CE certificates for all our machines and ATEX certificates for necessary machines available.☀️

Būklė: naujas, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✈️ 12-week delivery time ✈️ ✅✅✅Energy Efficiency Class A+++✅✅✅ ✳️Maintain your liquidity! We offer a wide range of financing options to ensure your investment has the greatest chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs.✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time❗⌛⏰◄◄◄ ✨✨Buy directly from the manufacturer and secure both price and quality advantages!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☀️ 2 YEARS WARRANTY ☀️ ✅The Multi-Treat spray pre-treatment machine is used for surface treatment of materials to be painted. It offers the ability to process up to 8 different chemicals with tanks configured according to process requirements. All tanks are made from 316 stainless steel and are insulated. The number of tanks and the number of heated tanks are determined based on process steps. ✅Tank heating is via gas heat exchangers. Processes can be monitored, and times and temperatures for all steps can be set via the PLC touchscreen. ✅Any system errors can be observed at the control panel. The tanks are equipped with automatic floats; the system stops automatically if there is insufficient water or chemicals in the tanks, and the fluid is automatically transferred between tanks as needed to keep the system safe. ✅There is a drip pan underneath all tanks, made from 316 stainless steel. The tanks are made of 2 mm thick 316 stainless steel. All materials undergo penetration testing and are argon-welded and hermetically sealed. Grids in the tanks prevent debris from reaching the pumps. The inside of the cabin is made of 304 stainless steel sandwich panels, while the exterior is powder-coated sheet metal. ✅The panel thickness is 80 mm. Panels are stainless steel filled with polyurethane. PPT ring pipes and nozzles ensure long service life. ✅Thanks to the steam extraction fan, steam from the system is prevented from entering the workspace. The washer cabin doors are container-style and sealed with silicone gaskets. The movable washing platform inside the cabin moves back and forth to clean the materials. Hoses are supported by a mobile carrier system. Each process has its own pumps and a waste pump for emptying tank fluids. The discharge pump connects to the chemical discharge tank. Iisdsfggcwspfx Aauoa ✅Manual application guns are provided for each process for manual use. The system offers a manual pre-treatment mode. Both drip time and process duration can be set via the PLC control panel; drip time is applicable for manual operation.

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, galia: 83 kW (112,85 AG), bendras svoris: 6 000 kg, bendras ilgis: 460 000 mm, bendras plotis: 4 000 mm, bendras aukštis: 4 300 mm, Gamybos metai: 2024, veikimo valandos: 300 h, įvesties srovės tipas: trifazis, Parduodame pilnai veikiantį metalo laužo žirkles / aligatoriaus žirkles. 2023 metų pabaigoje ATM atliko kapitalinį remontą. - Paruoštos iškart darbui Iiodeq Nmw Ispfx Aauja - Remontų nereikalauja - Pridedamos 4 poveržlės Naudojimo sritys: - Varinių, cinko, švino katodų pjovimas iki 25 mm - Automobilių radiatorių pjovimas iki 105 mm aukščio - Aliuminio lakštų, profilių, strypų, vamzdžių pjovimas iki 25 mm - Varinių, aliuminio, švino vamzdžių pjovimas iki 105 mm aukščio - Nerūdijančio plieno lakštai iki 16 mm - Plieniniai profilio vamzdžiai, lakštai, vamzdžiai, strypai, plokščios geležtės Aligatoriaus žirklės, metalo laužo žirklės, katodų žirklės, žirklės, smūginės žirklės, hidraulinės žirklės, lakštų žirklės, giljotinos žirklės, katalizatorių žirklės, stalo žirklės, automobilių radiatorių žirklės, kabelių žirklės, vamzdžių žirklės.

Gamybos metai: 2018, būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Siūlome šį naudotą Wolf WK-com N-W B127 oro apdorojimo įrenginį su Panasonic šilumokaičiu ir vėsinimu, pagamintą 2018 m. Nominalus oro srautas (20 °C): 7 500 m³/h Isdpfxoyir Nzj Aausia Nominalus oro srautas (20 °C): 2,08 m³/s Bendras slėgio skirtumas (Δp stat.): 721 Pa Išorinis slėgio skirtumas (Δp stat. ext.): 400 Pa Sistemos efektyvumas η: 67,0 % Ventiliatoriaus greitis darbiniame taške nᵥ: 1 357 1/min Didžiausias ventiliatoriaus greitis nᵥ max: 1 550 1/min Darbinė srovė Iᵦ: 3,4 A Antgalio slėgio skirtumas Δp Dü: 593 Pa Kalibravimo koeficientas k: 308 Variklio nominali galia Pₙ: 3,4 kW Variklio nominali srovė Iₙ: 5,4 - 4,2 A Nominali įtampa Uₙ: 3~380..480/50 V/Hz Valdymo įtampa darbiniame taške: 8,8 VDC Jeigu turite klausimų arba reikia daugiau informacijos, drąsiai rašykite arba skambinkite mums.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Leica ASP300 Automatinis vakuuminis audinių procesorius. Ši pažangi sistema apjungia naujausias technologijas ir vartotojui patogią sąsają, iš naujo apibrėždama kasdienes klinikines bei mokslines histopatologijos užduotis. Novatoriškas lietimui jautrus spalvotas ekranas, išmani reagentų suderinamumo stebėsenos sistema ir individualiai pritaikomos valymo programos užtikrina optimalias apdorojimo sąlygas bei aukštą mėginių kokybę. Pagerintas saugumas, nuotolinio užpildymo ir išleidimo funkcijos bei maksimali 300 kasečių talpa garantuoja efektyvumą ir patikimumą. Atraskite intuityvią naudotojo patirtį su tirpalams atspariu spalvotu lietimui jautriu ekranu, integruotu Leica ASP300. Paprasta sąsaja aiškiai veda vartotoją per visus proceso etapus, užtikrindama nesudėtingą valdymą. Vizualus procesų atvaizdavimas ekrane suteikia papildomo aiškumo ir leidžia lengviau kontroliuoti eigą. Naudokitės inovatyvia reagentų suderinamumo stebėsena, kuri užtikrina, kad naudojami reagentai atitinka visus darbo reikalavimus, taip sumažinant klaidų skaičių ir padidinant procesų efektyvumą. Įrenginyje integruota veikimo kokybės kontrolė (QC), užtikrinanti stabilų našumą ir patikimus rezultatus po kiekvieno ciklo. ASP300 audinių procesorius turi nuotolinę užpildymo ir išleidimo sistemą, dar labiau supaprastinančią laboratorinius darbus. Keturi slėgio ir vakuumo režimai – P/V, P, V ir aplinkos – leidžia pasirinkti optimaliausius nustatymus pagal individualius poreikius, užtikrinant geriausias apdorojimo sąlygas. Darbo eiga gali būti individualizuojama pasirenkant keturias naudotojo nustatomas valymo programas, leidžiančias tiksliai pritaikyti procesorių laboratorijos poreikiams. Veiklioji parafino valymo programa prailgina parafino tarnavimo laiką ir padeda sumažinti eksploatacijos išlaidas. Iisdoupv Nkjpfx Aauja Gera darbinė būklė. Peržiūrėkite ir kitus mūsų siūlomus įrenginius.

Būklė: naujas, Gamybos metai: 2023, Naujas – Niekada neįrengtas Envistal Flex oro apdorojimo įrenginiai su dideliu lankstumu Šoninio prijungimo oro apdorojimo įrenginys su integruota valdymo sistema ir plačiu funkcinių sekcijų spektru. Iodeyvunujpfx Aauoia Modelis – TH-600-AA-2V-1-40-00 Metai: 2023 Maksimalus leistinas slėgis: 40,5 bar

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, Siūlomas Urschel COMITROL Processor Model 3600 Slant. Įstrižasis procesorius. Pilnai su plienine konstrukcija ir baku. Nenaudotas. Gamybos metai: 2020. Iodexl R Efopfx Aaueia

Būklė: naudotas, Labeling capacity: approx. 3,000 bottles/hour. Formats: 0.75 l of various sizes, equipped with two (2) self-adhesive labeling units for the application of – one front label – one back label onto cylindrical or shaped glass bottles two (2) cold glue labeling units for the application of – one front label – one back label – one neck band onto cylindrical glass bottles Label length: 10–195 mm Label height: 10–180 mm Iisdpfx Aajxyt D Teuoa Container diameter: 40–130 mm Container height: 140–380 mm Maximum production output: 3,500 bottles/hour Installed power: 4 kW – Complete with AISI 304 stainless steel frame and doors – Automatic speed regulation – Head height adjustment via touchscreen display – Optical orientation based on a mark on the capsule, detected by sensors on each plate, with plate rotation by stepper motors – Four (4) quick-change bottle plates – Two (2) labeling units for self-adhesive labels, model MAK-AN, 50 m/min, mounted on movable stations on the labeler's frame – Two (2) labeling units on 4 axes, adjustable via handwheel and digital position display – Electrical control cabinet, waterproof, made of AISI 304 stainless steel – Machine control via PLC and touchscreen display Technical details: Conveyor direction: rotary, clockwise, left-right Capacity bottles/hour: 5,200 Labels: self-adhesive labels, cold-glue paper labels Number of labeling stations: 4 Number of bottle plates: 4 Orientation: optical orientation using photocell, bottle plate with stepper motor Motor height adjustment: yes Speed adjustment: frequency converter