Richard Hess Mbv Gmbh Stanzmesser Aus Vollem Stahl pirkti naudotą (72 173)

Gamybos metai: 2024, būklė: naujas, Punching dies made from solid steel, eroded Our punching dies are manufactured from selected steels and are available in a wide range of geometries and standards such as ISO, DIN, JIS, ASTM, and IEC. Dcjdskkhkuepfx An Hjh They are distinguished by: - Expert selection of steel - Material-specific cutting geometry - Optional configurations with various sample ejectors and clamping pins - Custom manufacturing in different heights possible - Available as multicutter versions - Excellent cutting finish - Optimal cutting results - Suitable for all types of presses, e.g., manual toggle presses, pneumatic and hydropneumatic presses

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2018, mašinos/transporto priemonės numeris: STHP 80KN, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 8 t, stalo plotis: 300 mm, bendras ilgis: 200 mm, bendras plotis: 510 mm, bendras aukštis: 1 320 mm, bendras svoris: 110 kg,

Gamybos metai: 2024, būklė: naujas, Super Dumbbell – the ultimate punching die with interchangeable precision blades The Dumbbell punching die, featuring a built-in spring ejector and 5 sets of spare precision blades, forms a 6-piece punching die set and is ideally suited for both manual and pneumatic presses. Outstanding value for money “6 blades for the price of one” Dcsdpfx Aski Tqcon Hoh Interchangeable precision blades • Japanese carbon steel: ultra-hard – ultra-sharp – maximum edge retention • Simple replacement • No regrinding required • No downtime • Ultra-thin, symmetrical blades minimize concave specimen cross-sections (see Fig. 1) • No more premature tearing of test strips • Up to 10% higher tensile strength and elongation at break values • Extremely smooth cut surfaces (see Fig. 2) • Available separately at any time Guaranteed for: • High-precision test specimens • Reliable and reproducible test results Ideally suited for: • Elastomers, plastics, and more • All standard test methods, such as ISO, DIN, JIS, ASTM, IEC

Gamybos metai: 2024, būklė: naujas, mašinos/transporto priemonės numeris: H3000-H5000TM,

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, veikimo valandos: 5 h, Funkcionalumas: visiškai funkcionalus, Mini-reometras – Tiksli sukietėjimo elgsenos analizė Mini-reometras yra itin tikslus bandymo įrenginys, skirtas nustatyti gumos ir kitų sukietėjančių polimerų sukietėjimo elgseną. Universalios taikymo galimybės ✔ Dervų, cemento ir klijų apdirbimo trukmės nustatymas ✔ Naudojamas odontologijos pramonėje ✔ Tinka tyrimams, plėtrai ir greitam produktų kokybės patikrinimui Efektyvus ir greitas bandymas Bandymo trukmė tiksliai atitinka sukietėjimo laiką 1 g medžiagos nustatytoje temperatūroje. Darbo principas: Linijinė šlyties deformacija pagal DIN 53529, 1 dalis Inovatyvios technologijos patikimiems rezultatams ✔ Atveriama matavimo kamera su integruotu jutikliu (mentelė) ✔ Greitas temperatūros stabilumas dėl mažos kameros talpos ✔ Dinaminis matavimas naudojant sinusinį šlyties krūvį su maža amplitude ir dažniu ✔ Tiksli duomenų registracija per matavimo jutiklį, sujungtą su modernia elektronika ir programine įranga ✔ Sukietėjimo izotermos vaizdavimas ir vertinimas pagal DIN 53529, 2 dalis Dodpfx Aexzrbajn Hsch Komplektacija: mini-reometras, programinė įranga, Windows 11 kompiuteris, apimties štampas

Būklė: geras (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: H50KS, traukos jėga su apkrova: 50 000 N,

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2012, veikimo valandos: 100 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: H5KS, Universal Testing Machine, Model H5kS Extended version by 254 mm With 5 kN and 500 N load cells, grips, and Windows 10-11 software For tensile, compression, bending, shear, etc. tests, compliant with EN ISO 7500-1 and ASTM E4 standards. The H5kS is a universal testing machine designed according to the latest standards. The machine operates in accordance with relevant EU radiation protection and safety directives (EN 50081-1, 72/23/EEC, EN 61010-1). The maximum internal voltage is 48 volts. Key Features • Large, easy-to-read liquid crystal display with backlight • Graphical or numerical display modes • Alphanumeric file input • Speed range 0.001 to 1000 mm/min (2.5 kN) • Speed range 0.001 to 500 mm/min (5 kN) • High return speed 0.001 to 1500 mm/min • Precise crosshead positioning • Robust load frame • Result output report with mean and standard deviation via printer • Wide range of testing software under Windows for various standards • RS232 interface mode for computer system integration • Load cell force display accuracy: 0.5% across the entire range • Displacement display accuracy: 0.001 mm • Equipped with force and displacement alarm system • 32-bit motor controller • 20% digital weight compensation during load cell calibration • Automatic motor alarm for over/under voltage and overheating Specifications: • Force measurement accuracy: +/- 0.5% of displayed force in the 2% to 100% range • Position measurement accuracy: +/- 0.01% or 0.001 mm • Speed accuracy: +/- 0.005% of selected speed • Operating temperature: 0 to 38°C Dcsdjq Ruygopfx An Hsh • Humidity range: 10% to 90% Technical Data: • Single-spindle benchtop model • Maximum load: 5 kN in tension and compression • Maximum travel: 1004 mm without grips • For further details, please refer to the brochure Dimensions: Height: 1394 mm Width: 490 mm Depth: 450 mm Weight: 102 kg Power supply: Machine: 50-60 Hz, 2000 W Power unit: 220/240 VAC

Gamybos metai: 2024, veikimo valandos: 5 h, būklė: beveik kaip naujas (parodų įrenginys), 1 Hydropneumatic Press Type STHP 60 kN with two-hand control - floor-standing model with and without base frame The compact and handy bench model features a hydropneumatic drive with pressure intensifier, which can increase the punching force by up to five times. During the working stroke, the punching cylinder is supplied with oil from the intensifier, resulting in a purely hydraulic punching stroke. The return stroke is performed directly with compressed air. The adapter, which can be screwed into the piston rod of the working cylinder, enables the installation of special tool holders. Dcjdpfx Ajpn Unven Hjh

Būklė: naujas, galia: 238,3 kW (324,00 AG), kuro tipas: dyzelinas, pavaros tipas: automatinis, ašių konfigūracija: 4x2, ratų bazė: 4 820 mm, didžiausias leistinas svoris: 11 990 kg, krovimo vietos ilgis: 6 800 mm, krovinių skyriaus plotis: 2 450 mm, emisijos klasė: Euro 6, spalva: geltonas, vairuotojo kabina: miegamoji kabina, pakaba: plienas-oras, Gamybos metai: 2026, Įranga: ABS, borto kompiuteris, centrinis užraktas, diferencialo užraktas, elektroninė stabilumo programa (ESP), kabelinė gervė, kruizo kontrolė, oro kondicionavimas, oro pagalvė,

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: og5, 5,000 litre capacity according to DIN 6616/D, above-ground, double-walled, including test certificate. The tank is equipped with two saddle feet, a DN 500 manhole with dome cover, is pre-owned, internally emptied and professionally cleaned, and will be fitted with the following fittings: 1 filling pipe with TW cap (filling cap) and dip tube, 1 gauging pipe with gauge rod and gauge rod closure, 1 vent pipe with vent hood, 1 brand new overfill prevention device with type approval (AIII), 1 ladder and 1 spare socket for withdrawal purposes, 1 optical leak detection device with type approval and leak detection fluid. The tank is suitable for the storage of HVO (Hydrotreated Vegetable Oil). Dedpfxjcyb E Ne An Hoch The tank will be newly primed and painted externally. L = approx. 2.80 m / Ø = 1.60 m / Weight approx. 1.3 t / ex works, free loaded. We are happy to offer you cost-effective delivery. You will receive an invoice with VAT stated. The sale is subject to our general terms and conditions.

Būklė: naudotas, Technical details: Sheet thickness: 1 mm Frame opening: 2,255 mm Maximum bending angle: 130° Total power requirement: 2.25 kW Approx. machine weight: 1,400 kg Machine dimensions (LxWxH): approx. 2.7 x 1.15 x 1.3 m Machine without foot switch; however, it is pre-wired for one. The previous owner converted the upper beam adjustment to 60 mm; greater adjustment is only possible by reverting the modification. The foot control for automatic operation is missing. Manual operation is functional. Dedowq I U Rjpfx An Hoch No back gauge.

Būklė: naudotas, Gamybos metai: 2017, Maks. darbo plotis: 240 mm Maks. šlifavimo aukštis: 140 mm Dodpfx Anoxwtwue Hsch Svoris apie 2200 kg Dvipusė (viršuje / apačioje) šlifavimo staklės Stähle Hess Saturn Roto Finish skirtos lango tašų arba kitų medienos ruošinių preciziniam šlifavimui. Du agregatai, kiekviename po kelis plokštuminius, besisukančius įrankius, kurie kartu su šlifavimo agregatu taip pat sukasi apie savo ašį, leidžia paprastai nustatyti medienos rūšį ir efektyviai nukirsti medienos pluoštus. Naudojimas pavyzdžiui po obliavimo staklių langų gamyboje kaip šlifavimo staklės. Techniniai duomenys: žr. PDF

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, Pasiūlymo objektas – kompaktiška bandelių dalijimo ir formavimo mašina Mini Rex Futura, išsiskirianti dideliu našumu ir plačiu svorių diapazonu, užtikrinant aukštą tešlos apdirbimo kokybę. ĮRENGINIO APRAŠYMAS Bandelių dalijimo ir apvalinimo mašina Mini Rex Futura, pagaminimo metai – 2011. Rankinis tešlos įkrovimas į bunkerį Dcsdpoy Angqsfx An Hjh 2 eilučių veikimo režimas Produktų nuėmimas rankiniu būdu nuo padavimo juostos Našumas: 33 ciklai/min.; 3960 vnt./val. Svorio diapazonas: L: 25 g – 75 g; H: 70 g – 140 g Valdymo skydelis Tinka kvietinei, graham, mielinei tešlai, spurgoms Galima valdyti vienam operatoriui Įrenginio matmenys (aukšt. x ilg. x plot.): 1800 x 1770 x 650 mm Prieinamumo terminas: numatoma remonto pabaiga – šių metų gegužės pabaiga. Nuotraukoje pateikta panaši mašina po kapitalinio remonto Cream Serwis įmonėje. Susisiekite su mumis – atsiųsime kainos pasiūlymą ir daugiau informacijos.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, This offer is for a used G2000 bun production line equipped with a Mini Rex Futura divider-rounder from 2009. Designed for the production of: Dcodey And Nepfx An Hjh • Round stamped buns • Long, unstamped buns • Sliced buns • Rolled buns • Kaiser rolls • Hot dog rolls • Poznań rolls Product description: • Fully automatic and compact bun production line • Based on the rotary Mini Rex Futura divider-rounder from 2009 • 2-row operation • Manual product retrieval from the discharge conveyor • Stamping station with easily exchangeable tools; set includes: Kaiser roll head, Corinthian • Integrated elongation and flattening unit • Weight range: - For stamped buns: 25g to 75g dough piece weight – output: from 1,800 pcs/h to 2,640 pcs/h - For unstamped buns: 80g to 125g dough piece weight – output: from 1,800 pcs/h to 3,960 pcs/h • Proofing time: approx. 6 min with an output of 2,000 pcs/h • Suitable for wheat, wholemeal, yeast, and doughnut doughs • Operated by a single person The machine is currently undergoing a complete overhaul, which is expected to be completed by mid-June 2026. The photos show a similar bun line after general overhaul at Cream Serwis. If you are interested in the price or would like to receive more pictures, please contact us.

Būklė: naudotas, Gamybos metai: 2023, veikimo valandos: 22 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61035145, spaudimo jėga: 1 200 kN, varžto skersmuo: 35 mm, darbinio tūrio: 393 cm³, įpurškimo slėgis: 2 429 juosta, injekcijos svoris: 140 g, formos aukštis (min.): 200 mm, išmetimo jėga: 33 000 N, išstūmimo eiga: 120 mm, atvērimo eiga: 950 mm, įrengimo aukštis: 450 mm, bendras ilgis: 5 650 mm, bendras plotis: 1 820 mm, bendras aukštis: 1 950 mm, bendras svoris: 6 700 kg, šildymo galia: 15,5 kW (21,07 AG), pavaros tipas: Vollelektrisch, laisvas tarpatramis: 570 mm, įrankio svoris: 600 000 g, Injection Moulding Machines Direct from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and flexible stock machines: The base model injection moulding machine, the precisionMolding, is the perfect entry-level solution for all-electric injection moulding, enabling rapid and innovative responses to market requirements. It combines high performance, ease of operation, and short delivery times. It can be used in a wide range of applications, such as in the packaging industry, electrical and electronics sectors, medical technology, and the automotive industry. Key benefits: – Optimised price-performance ratio for a broad range of applications – High energy efficiency thanks to an all-electric machine concept – Fast delivery times thanks to the base machine concept with a wide range of options. TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine no.: 61036683, new, year 2013) CONTROL SYSTEM  MC P1 with 15" TFT colour display with multi-touch functionality CLAMPING UNIT  Clamping force kN 1200  Maximum mould opening force kN 180  Clearance (h x v) mm 520 x 470  Mounting platen (h x v) mm 690 x 640  Mould installation height min. - max. mm 180 - 450  Maximum opening distance mm 850  Maximum mould opening stroke mm 450  Ejector drive electric  Ejector stroke mm 120  Ejector force fwd/rtn kN 27 / 33  Ejector speed fwd/rtn mm/s 300 / 300  Maximum mould weight kg 850 Djdpfx Aoy Rmwden Hoch INJECTION UNIT  Screw diameter / type mm 35 / standard  Effective L/D ratio 22.9  Injection pressure bar 2429  Shot volume cm³ 154  Shot weight at max. stroke for PS g 140  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive/speed 1/min 374  Plasticising rate (standard screw) g/s 18.9  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 22.7  Installed heating capacity kW 11.5  Power supply V / Hz 200 / 50, 3-phase with neutral WEIGHT AND DIMENSIONS  Net weight with control cabinet t 6.7  Length x width x height m 5.18 x 1.76 x 1.90 ADDITIONAL EQUIPMENT  Wear-resistant plasticising system  BluePower full insulation for plasticising cylinder  Open nozzle  Air valve 1-fold (BWAP)  Pneumatic control for hot runner shut-off 1-fold  Electric interface for pneumatic cascade 4-fold  Euromap handling interface E18 + E67  Euromap interface (central computer) E67, E77  Water battery 4-fold  Electrical preparation for hydraulic auxiliary unit  Automatic central lubrication  Adaptive Process Control (APC)  Injection-compression moulding function  Graphic analysis package  Swivelling device for the injection unit The machine is located at our factory in Parsdorf and is available at short notice. Further additional options can be offered upon request. We look forward to your enquiry.

Būklė: naudotas, Gamybos metai: 2006, veikimo valandos: 1 609 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61008195, spaudimo jėga: 800 kN, varžto skersmuo: 40 mm, tarpas tarp stulpų: 420 mm, darbinio tūrio: 201 cm³, įpurškimo slėgis: 2 500 juosta, injekcijos svoris: 183 g, formos aukštis (min.): 400 mm, išmetimo jėga: 22 600 N, išstūmimo eiga: 150 mm, atvērimo eiga: 750 mm, bendras ilgis: 3 960 mm, bendras plotis: 1 480 mm, bendras aukštis: 2 020 mm, bendras svoris: 3 550 kg, šildymo galia: 10,9 kW (14,82 AG), pavaros tipas: Hadraulisch, laisvas tarpatramis: 470 mm, įrankio svoris: 1 000 000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and versatile stock machines: The fully hydraulic CX series provides especially compact, efficient, and flexible two-platen machines. The highly compact two-platen concept with cantilevered clamping unit offers generous mounting space for peripheral devices and excellent accessibility. Efficient and intelligent energy management with BluePower servo drive technology further provides a powerful foundation to meet the highest standards, delivering the right solution for any application. TECHNICAL DATA: KM 80 / 380 CX G01 (Order 38648713) CONTROL UNIT - MC 6 with TFT color display and multitouch functionality CLAMPING UNIT - Clamping force: 800 kN - Maximum mold opening force: 55 kN - Daylight opening (h x v): 470 x 420 mm - Mounting plate dimensions (h x v): 670 x 670 mm - Minimum / Maximum mold installation height: mm - Maximum opening stroke: 750 mm - Maximum mold opening stroke: 500 mm - Ejector drive: hydraulic - Ejector stroke: 150 mm - Ejector force forward/back: 23 / 10 kN - Ejector speed forward/back: 760 / 800 mm/s - Maximum mold weight: 1000 kg INJECTION UNIT - Screw diameter / type: 40 mm / Standard (optional adjustment possible) - Effective L/D ratio: 20 - Injection pressure: 1860 bar - Shot volume: 201 cm³ - Shot weight at max. stroke for PS: 183 g - Injection speed: 100 mm/s - Injection flow: 126 cm³/s - Screw drive speed: 295 rpm - Plasticising rate (standard): 12.3 g/s - Nozzle contact force: 50 kN ELECTRICAL PARAMETERS - Connected load: 15.0 kW - Installed heating capacity: 10.9 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral WEIGHT AND DIMENSIONS - Net weight (with control cabinet): 3.55 t - Length x width x height: 3.96 x 1.48 x 2.02 m ADDITIONAL EQUIPMENT - Wear-resistant plasticising - BluePower full insulation of plasticising cylinder - Open nozzle Djdoy Rlmwspfx An Hjch - 1 additional temperature control zone for nozzle heating - Air valve, single (BWAP) - Pneumatic control for hot runner shut-off, single - Hydraulic core pull, single (BWAP) - Euromap interface for handling: E18, E63 - Euromap interface (host computer): E67, E77 - Adaptive Process Control (APC) - Injection-compression function - Graphic analysis package The machine is located at our factory in Parsdorf and is available at short notice. Additional optional features can be offered upon request. We look forward to your inquiry.

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036679, spaudimo jėga: 1 600 kN, varžto skersmuo: 40 mm, darbinio tūrio: 393 cm³, įpurškimo slėgis: 1,892 juosta, injekcijos svoris: 358 g, formos aukštis (min.): 200 mm, išmetimo jėga: 33 000 N, išstūmimo eiga: 100 mm, atvērimo eiga: 950 mm, įrengimo aukštis: 500 mm, bendras ilgis: 5 650 mm, bendras plotis: 1 820 mm, bendras aukštis: 1 950 mm, bendras svoris: 9 700 kg, šildymo galia: 15,5 kW (21,07 AG), pavaros tipas: Vollelektrisch, laisvas tarpatramis: 570 mm, įrankio svoris: 600 000 g, Injection molding machines directly from the manufacturer! As the manufacturer KraussMaffei, we are offering you our inspected and flexible stock machines: The base injection molding machine, precisionMolding, is the ideal entry-level solution for fully electric injection molding, enabling fast and innovative responses to market demands. It combines high performance, user-friendly operation, and short delivery times. It is suitable for a variety of applications, such as packaging, electrical and electronics, medical technology, and the automotive industry. Your benefits: – Optimized price-performance ratio for a wide range of applications – High energy efficiency through a fully electric machine concept – Fast delivery times thanks to a base machine concept with a broad range of options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine no.: 61036683, new, year 2013) CONTROL SYSTEM • MC P1 with 15" TFT color touchscreen with multitouch functions CLAMPING UNIT • Clamping force kN 1600 • Maximum mold opening force kN 120 • Clear distance (h x v) mm 570 x 520 • Mounting plate size (h x v) mm 770 x 720 • Mold installation height min. - max. mm 200 - 500 • Opening stroke mm 950 • Maximum mold opening travel mm 450 • Ejector drive: electric • Ejector stroke mm 100 • Ejector force fwd/rev kN 33 / 33 • Ejector speed fwd/rev mm/s 300 / 300 Dcedpfoyzz Irsx An Heh • Maximum mold weight kg 1200 INJECTION UNIT • Screw diameter/type mm 50 / standard • Effective L/D ratio 20.2 • Injection pressure bar 1892 • Shot volume cm³ 393 • Shot weight at max. stroke for PS g 358 • Injection speed mm/s 200 • Injection flow rate cm³/s 393 • Screw drive/speed rpm 267 • Plasticizing rate (standard screw)4) g/s 36.5 • Nozzle contact force kN 42 ELECTRICAL PARAMETERS • Connected load kW 31.2 • Installed heating capacity kW 15.5 • Power supply V / Hz 400 / 50, 3-phase with neutral WEIGHT AND DIMENSIONS • Net weight with control cabinet t 9.7 • Dimensions L x W x H m 5.65 x 1.82 x 1.95 ADDITIONAL FEATURES • Wear-resistant plasticizing system • BluePower full insulation of plasticizing cylinder • Open nozzle • Air valve single (BWAP) • Pneumatic hot runner control, single circuit • Electrical interface for pneumatic cascade, 4-fold • Euromap interface handling E18 + E67 • Euromap interface (central computer) E67, E77 • Water manifold 4-fold • Electrical prep for hydraulic auxiliary unit • Automatic central lubrication • Adaptive Process Control (APC) • Injection-compression function • Graphic analysis package • Swiveling device for injection unit The machine is located at our plant in Parsdorf and is available at short notice. Further optional extras available on request. We look forward to your inquiry.

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Simply Center Punch – the Centering Aid! A Revolution in Precision: Introducing the "Simply Center Punch" The world’s only unique marking device – our own innovation from Northern Germany. The Problem No more inaccurate center punching of round parts - Are you familiar with the challenges of accurately center punching shafts/rods from 15 mm to 400 mm? - Inaccurate positioning. Dodsxb Ucajpfx An Hech - Poor lighting conditions. - No reading glasses for older users. - Time-consuming manual alignment. - Inefficient and error-prone processes. - The market offers no universal or reliable solution for various diameters. Our Solution: Simply Center Punch – World First! Simply Center Punch: Precision made simple. - Globally unique: A center marking/centering aid developed by us and protected by utility patent, setting new standards in the industry. - 100% proprietary development: From the first concept to the finished product – all from a single source. - In-house production: We guarantee quality "Made in Germany". - Versatile application: For diameters from 15 mm to 400 mm. - Center punching at the push of a button: Simply position, turn the handle, and mark the center. The advantages at a glance Your benefits. - Maximum precision: Centers boreholes and marks with an accuracy of up to 0.3 mm. - Saves time and money: Speeds up work processes and reduces the need for reworking. - Extremely user-friendly: Intuitive operation, no previous experience required. Weight only 780 g. - Universal use: One tool for almost all diameters in mechanical engineering, metal fabrication, and more. - Robust and durable: Manufactured from high-quality materials for professional continuous use.

Būklė: naujas, Gamybos metai: 2024, ruošinio svoris (maks.): 12 kg, • Weight approx. 11.8 kg • CNC-manufactured from grade A 600, anodized surface • Working range up to 506 mm diameter • No additional material handling required, saving crane capacity, man-hours, and energy When machines are used for this purpose, the item has to be craned to the machine and back to the picking area—the time lost for just 2 center drillings is immense. • Ready for use within seconds • Infinitely variable clamping, 3 diameter ranges • Create a center bore in seconds (directly after sawing, on the machine) • All components made in Germany • Centering according to DIN 333 Form A, 60°, 5, 6.3, and 8 mm. Other requests possible as well. An absolute “must-have” for every steel trader! • Sales price: €5,950.– (net) plus VAT, ex stock, free delivery within Germany • Scope of delivery: unit, Fein cordless drill, charger, • 2 batteries – complete in carrying case • 3 center drills 5, 6.3, and 8 mm DIN 333 A with flat, incl. 3 holders, one 6 m Dcedsri Sicopfx An Hjh

Būklė: geras (naudotas), Used stainless steel tank / transport container / IBC Previous application: Chemicals Tank cleaned and ADR-certified for hazardous goods until 10/22 Item number: 10495 Volume: 500 liters Type: Upright in galvanized stackable frame Contact material: 1.4301 / AISI 304 Design: Single-walled Bottom: Dished Top: Dished Working pressure per nameplate: +0.1 bar Tank dimensions: Total width: 1200 mm Total length: 1000 mm Total height: 1000 mm Materials: Internal: 1.4301 / AISI 304 External parts: Galvanized steel Dcsdpfx Anoflrhqo Heh Features: Nameplate: Yes Outlet diameter: approx. 70 mm Outlet type: Disc valve Outlet valve: Yes Manway cover 400 mm with clamping ring

Būklė: geras (naudotas), Used Stainless Steel Transport Container / Silo Quantity: 17 Item number: 10440 Previous application: Unknown Volume: 650 L Type: Upright in galvanized frame Medium-contact material: 1.4301 / AISI304 Design: Single-walled Bottom: Conical bottom Top: Domed top Operating pressure as per nameplate: ATM Container dimensions: Distance from outlet to ground: 250 mm Total height: 1655 mm Total width: 830 mm Total length: 1030 mm Materials: Inside: 1.4301 / AISI 304 Outside: Galvanized steel Fittings: Nameplate: yes Dcedpjd Sw Dfefx An Hjh Outlet: DN80 Discharge valve: Camlock Top fully removable

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036946, spaudimo jėga: 800 kN, varžto skersmuo: 40 mm, darbinio tūrio: 201 cm³, įpurškimo slėgis: 1 860 juosta, injekcijos svoris: 183 g, formos aukštis (min.): 150 mm, išmetimo jėga: 22 000 N, išstūmimo eiga: 100 mm, atvērimo eiga: 750 mm, įrengimo aukštis: 400 mm, bendras ilgis: 4 750 mm, bendras plotis: 1 670 mm, bendras aukštis: 1 850 mm, bendras svoris: 5 600 kg, šildymo galia: 11,5 kW (15,64 AG), pavaros tipas: Vollelektrisch, laisvas tarpatramis: 735 mm, įrankio svoris: 600 000 g, Injection Moulding Machines Direct from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The base injection moulding machine, precisionMolding, is the perfect entry-level solution for fully electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short lead times. Suitable for a wide range of applications, such as the packaging industry, electrical and electronics sector, medical technology, and automotive industry. Your benefits: – Optimised price-performance ratio for a broad range of applications – High energy efficiency thanks to an all-electric machine concept – Short delivery times made possible by the base machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (Order 38670023) CONTROL SYSTEM - MC P1 with 15" TFT colour screen featuring multi-touch functions CLAMPING UNIT - Clamping force: kN 800 - Max. mould opening force: kN 120 - Clear width (h x v): mm 470 x 420 - Mounting plate (h x v): mm 610 x 560 - Mould installation height min. - max.: mm 150 - 400 - Opening width: mm 750 - Max. mould opening stroke: mm 350 - Ejector drive: electric - Ejector stroke: mm 100 - Ejector force fwd/rev: kN 22 / 22 - Ejector speed fwd/rev: mm/s 300 / 300 - Max. mould weight: kg 600 INJECTION UNIT - Screw diameter / type: mm 40 / standard - Effective L/D ratio: 20.0 - Injection pressure: bar 1860 - Stroke volume: cm³ 201 - Shot weight at max. stroke (PS): g 183 - Injection speed: mm/s 200 - Injection flow: cm³/s 251 - Screw drive / speed: 1/min 334 - Plasticising rate (standard): g/s 24.7 - Nozzle contact force: kN 34 Dsdpfx Asud H Dmon Hsch ELECTRICAL PARAMETERS - Connected load: kW 20.6 - Installed heating capacity: kW 11.5 - Power supply: V / Hz 400 / 50 3-phase with neutral WEIGHT AND DIMENSIONS - Net weight (with control cabinet): t 5.6 - Length x width x height: m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT - Low-wear plasticising system - BluePower full insulation for plasticising cylinder - Open nozzle - Air valve, single (BWAP) - Pneumatic control for hot-runner shut-off, single - Electrical interface for cascade control, 4x - Euromap interface for handling, E18, E63 - Euromap interface (central computer), E67, E77 - Water manifold, 4x - Automatic central lubrication - Adaptive Process Control (APC) - Injection-compression moulding control - Graphics analysis package The machine is located at our Parsdorf facility and is available at short notice. Further optional extras are available on request. We look forward to your enquiry.

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61037337, spaudimo jėga: 800 kN, varžto skersmuo: 30 mm, darbinio tūrio: 113 cm³, įpurškimo slėgis: 2 500 juosta, injekcijos svoris: 103 g, formos aukštis (min.): 400 mm, išmetimo jėga: 22 600 N, išstūmimo eiga: 150 mm, atvērimo eiga: 900 mm, bendras ilgis: 3 960 mm, bendras plotis: 1 480 mm, bendras aukštis: 2 020 mm, bendras svoris: 3 550 kg, šildymo galia: 10,9 kW (14,82 AG), pavaros tipas: Hadraulisch, laisvas tarpatramis: 470 mm, įrankio svoris: 1 000 000 g,

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036721, spaudimo jėga: 6 500 kN, varžto skersmuo: 70 mm, tarpas tarp stulpų: 1 110 mm, darbinio tūrio: 1 078 cm³, įpurškimo slėgis: 1 877 juosta, injekcijos svoris: 981 g, atvērimo eiga: 3 200 mm, plokštės aukštis: 1 540 mm, pavaros tipas: Hydraulisch, laisvas tarpatramis: 3 200 mm, įrankio svoris: 2 200 000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you here our inspected and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. The sophisticated GuideX sliding shoe perfectly absorbs forces and extends the lifetime of the moulds. The innovative GearX locking system engages immediately and reliably. Powerful, user-friendly and highly stable in value. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24” TFT colour display with multitouch functionality CLAMPING UNIT - Clamping force kN 6500 - Max. mould open force kN 455 - Tie bar spacing (h x v) mm 1110 x 960 - Platen size (h x v) mm 1540 x 1440 - Mould installation height min.-max. mm 1550 (without center platen) - Daylight mm 3200 - Max. opening stroke mm 1650 - Max. mould weight kg 22000 INJECTION UNIT 1 SP2000 - Screw diameter/type mm 60 / Thermoplastic - Effective L/D ratio 23.3 - Injection pressure bar 2420 - Shot volume cm³ 792 - Shot weight max. stroke PS g 720 - Injection speed mm/s 140 - Injection flow rate cm³/s 396 - Screw drive speed 1/min 285 - Plasticising rate g/s 72.2 - Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 - Screw diameter/type mm 70 / Thermoplastic - Effective L/D ratio 20 - Injection pressure bar 1877 - Shot volume cm³ 1078 - Shot weight max. stroke PS g 981 - Injection speed mm/s 140 - Injection flow rate cm³/s 539 - Screw drive speed 1/min 285 - Plasticising rate g/s 98.3 - Nozzle contact force kN 82 ELECTRICAL SPECIFICATIONS - Connected load kW 341 - Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS - Net weight t 43.5 - Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT - Wear-resistant plasticising unit - BluePower full insulation for plasticising cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull 2-fold (BWAP), 2-fold (FWAP) - Mould heating 96-fold (3.5 kW) - Euromap interface for handling E18 - Euromap interface (central computer) E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical center platen - Parallel clamping and opening movement during injection process with platen parallelism control between FWAP and center platen or BWAP and center platen - ColorForm interface—signal interface for connecting an RPM system - Electrical interface for HRS Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/reject part separation The machine is located at our factory in Parsdorf and is available at short notice. Additional options available upon request. Dedpfx Aew U N Ixen Hech We look forward to your enquiry.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, 6-station gripper machine, overhauled in 2024 completely new PLC machine control (no Pitney control) operation via color touch panel electronic gripper monitoring program can be expanded at any time and customized as per customer requirements various reading systems can be integrated Dcsdpfx Ajdyk Saen Hsh roll ejector with programmable divert bin 1-year warranty