Universali bandymo mašina Tempimo bandymo mašina

Richard Hess GmbH H50KS bis 50KN Zug u Druck

Gamybos metai: 2025, būklė: naujas, Automatischer Palettenspender ist das Rückgrat Ihrer Automatisierungsprozesse. Mit bis zu 10 Europaletten (1200x800 oder 1200x1200 mm) beladen, entfällt das manuelle Vorbereiten einzelner Paletten, wodurch Zeit gespart und die körperliche Belastung der Mitarbeiter reduziert wird. Stattdessen gibt das Gerät per Knopfdruck oder nach einem vordefinierten Algorithmus Paletten auf ein motorisiertes Rollenförderband frei, welches diese zur Weiterverarbeitung transportiert. Der PD-10 kann mit verschiedenen Palettierlösungen kombiniert werden. Für bis zu 10 Europaletten geeignet Beladung per Gabelstapler Reduziert körperliche Belastung Ppjdpfx Adehbg Uxjzjt Steigert die Effizienz

Būklė: labai geros būklės (naudotas), Weiss Type: WKL 34/60 Weiss climatic chamber, air-cooled Refrigerant converted to R-452A -60°C to 150°C Chamber volume: 34 liters Feed-throughs in standard configuration installed: R1 NW 50 mm L1 NW 120 mm Internal dimensions: Height 310 mm x Width 324 mm x Depth 300 mm External dimensions: Height 1740 mm x Width 630 mm x Depth 970 mm Specifications for temperature tests: Temperature range: -60 to +150 °C Temperature deviations under steady-state conditions (according to IEC 60068-3-5): Temporal fluctuation at center of workspace: ± 0.3 to ± 1 K / ± 1 to ± 2 K Spatial deviation (temperature gradient): 2 to 4 Temperature change rate (per IEC 60068-3-5): Heating: 2.5 K/min Cooling: 3 K/min Maximum heat compensation: 550 W Specifications for climatic tests: Temperature range: +10 to +95 °C Humidity range: 10 to 98 % r.h. Temperature and humidity deviations (steady-state, per IEC 60068-3-5): Temporal temperature fluctuation at center of workspace: ± 0.3 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 (temperature gradient): 1 to 3 Temporal humidity fluctuation at center of workspace: ± 3 to ± 5 % r.H. Operational data: Test chamber illumination: Halogen bulb 12V, 20W Rated voltage: 1/N / PE AC 230 V ± 10% 50 Hz Podjtr Dinepfx Adzopt Rated power: 2.5 kW Rated current: 11 A Protection (on-site): 16A slow-blow Heat emission (air-cooled chamber): Maximum heat emission to ambient: 1700 W Refrigerant: R-452A / R23 Weight: 140 kg Important safety information for the buyer! The following points will be completed on our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful completion, the chamber undergoes a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and error!) We are happy to answer further questions by phone.

Būklė: naudotas, Gamybos metai: 1965, Max. core drilling diameter: 50 mm Drilling depth: 2,000 mm Swing diameter: mm Max. drilling diameter: 110 mm Total power requirement: 30 kW Machine weight approx.: 10 t Year of manufacture: 1965 Overhauled: 2000 Drilling Ø - solid drilling approx. 2 - 50 mm - boring approx. 100 mm Max. drilling depth: 1,600 / up to 2,000 mm (see stroke/installation length) Podjt Hwucepfx Adzept Drill carriage stroke approx.: 4,000 mm Distance between spindle heads: 5,000 mm Center height over guideways: 350/450 mm Drill carriage feed, infinitely variable: 20 - 200 mm/min Rapid feed of drill carriage: 2,500 mm/min Workpiece speeds via belt drive: 260 - 650 / 650 - 1,625 rpm Working spindle drive: 24 kW Coolant pump drives: 1 x 7.5/15 kW, 1 x 15/28 kW Total drive approx. 60 kW, 380 V – 50 Hz Overall machine/guideway length: 7,500 / 5,000 mm Total weight approx.: 10,000 kg Accessories / Special features: - Machine consists of the following elements: Main spindle on the left side, followed by a BOZA, powered table assembly with ball screw, BOZA with increased center height, and a spindle stock of the B 16 series with drive motor approx. 7.5 kW, n = 900/2,400 and 2,400/6,000 rpm. Very large and elaborate coolant system with filter unit, extensive accessories and drilling tools up to 100 mm Ø. - Suitable for rotating workpiece/fixed drilling tool (ELB and BTA methods), as well as for stationary workpiece and rotating drilling tool. Internal (ELB) as well as external oil supply (BTA) possible. - Complete coolant system with tank and filter, 2 high-pressure pumps by SIG, adjustable flow rates: 17/40/120 and 220/500 L/min; capacity approx. 2,500 L. - Carriage feed via ball screw and infinitely adjustable DC motor; mounted table cross-adjustable approx. 500 mm, table approx. 800 x 800 mm for clamping cubic and cylindrical workpieces. Electrically controlled via cam track approx. 2,500 mm and limit switches for rapid traverse, feed, and return. - 2 closed 3-point steady rests, FORKHARDT 3-jaw manual chuck approx. 315 mm Ø. - Modernized control panel with speed display, feed adjustment and indication, kW display, feed/rapid traverse selection (left/right), etc. - 2 separate control cabinets, separate BOZA, sleeves, adapters, clamping aids, and much more. Condition: Good – ready for demonstration soon; machine is highly valuable due to accessories Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice Further deep hole drilling machines constantly in stock – please inquire with us.

Gamybos metai: 2010, būklė: paruoštas naudoti (naudotas), Electrode force: 100 daN, welding power: 255 kVA, rated power: 80 kVA, equipped with DALEX DRF 5.2 cooling unit. Podpfx Aoiknv Esdzopt

Gamybos metai: 2019, būklė: beveik kaip naujas (naudotas), MUT RWO 360/400-1150 Retort Heat Treatment Furnace - As new: barely used - Documentation available (both electronic and hard copy) - Pallet with spare parts included TECHNICAL DATA Model: RWO 360/400-1150 Ppsdpeiryyasfx Adzot Maximum furnace temperature: ≤ 1150 °C for max. 1 hour Operating temperature: ≤ 1100 °C, ≤ 1050 °C under vacuum Control accuracy: ± 2 K Temperature uniformity: ± 6 K in the range from 600 °C to 1150 °C at the end of the stabilization period Control voltage: 230 VAC / 24 VDC Furnace workspace: 360 x 400 mm Loading capacity: ≤ 50 kg Heating: Three-zone Pressure: ≤ 350 mbar Ultimate vacuum (cold, clean, dry furnace): < 5 x 10-5 mbar Footprint: 900 x 1900 x 3000 mm Total system weight approx.: 1500 kg Sound pressure level: < 70 dB We do not accept any liability for the accuracy, completeness, or up-to-dateness of the information provided.

Būklė: naujas, Gamybos metai: 2025, We offer you: Ppsdpfx Aog Sikredzot TPW1515 Wall Painting Booth Working dimensions (mm): 1500 (W) x 800 (D) x 1500 (H) Total dimensions (mm): 1800 (W) x 1200 (D) x 2200 (H) Standard equipment: • Fan output: 1.5 kW • Capacity: 8,640 m³/h • Pressure: 930 Pa • Lighting: 2 x 36 W • Explosion-proof EX fan • 3-stage air filtration • Paint stop filter • Filter mat • IP 66 control panel • Hermetically sealed lighting IP 65 Our booths are distinguished by very high manufacturing quality, operational safety, and customization of booth parameters to match your existing setup. We provide consultation in selecting paint booths, dedusting systems, extraction systems, and industrial heat recovery systems. CHOOSE BUMEX SP. Z O.O. • Very high quality of machines offered on the market • Professional advice and support • Warranty • Warranty and post-warranty service • Complete technical documentation • 100% customer satisfaction • All BUMEX SP. Z O.O. brand products are WE certified We offer our own transport service – prices are agreed individually for each order. We issue invoices with VAT shown separately. Short lead times! Machines can be configured and ordered in various personalized versions and dimensions! Please do not hesitate to contact us.

Būklė: naujas, Gamybos metai: 2025, TR serija yra lazerinė vamzdžių pjovimo staklė, skirta sunkių vamzdžių apdorojimui. Naudojama tradicinė horizontali lova, didelė keliamoji galia, mobilios portalinės konstrukcijos sistema leidžia valdyti įvairias sudėtingas pjovimo sąlygas. Platus pritaikymas statybinių sijų, vamzdynų apdirbimo ir plieninių konstrukcijų pramonėje. Didelių vamzdžių ir profilių lazerinio pjovimo staklės. Maksimalus diametras: H profilis iki 12 metrų ilgio vamzdis ar profilis Lazerių galvutė parenkama pagal medžiagos storį. Galia: 3–12 kW Maksimali žaliavos ilgis: 12 500 mm Apvalaus vamzdžio diametras: Φ70–Φ680 mm Kvadratinio vamzdžio kraštinė: □70×70–□480×480 mm Maksimalus pagreitis: 0,5G Kaina: EXW (sandėlis Europoje), įskaičiuota pakrovimas į sunkvežimį. Transportavimas, montavimas, paleidimas, apmokymai ir metinės priežiūros sutartys – pagal atskirą užklausą už papildomą mokestį. Ppedpfjmxl S Aex Adzst Montavimą ir apmokymus visada atlieka aukštos kvalifikacijos mūsų serviso komanda trijose Europos šalyse: Nyderlanduose, Vokietijoje, Rumunijoje. Oficialus pardavėjas: CNC Top Ten bv Coevorden, Nyderlandai

Būklė: labai geros būklės (naudotas), veikimo valandos: 8 064 h, Markė: LAGUN Modelis: GBM-22E Tipas: CNC 5 ašių Valdymas: HEIDENHAIN 530 Stalo matmenys: 2.200 x 1.000 mm T-plyšių skaičius ir plotis: 7 x 22 mm Atstumas tarp plyšių: 140 mm Ašių eiga (X, Y, Z): 2.000 x 1.200 x 1.000 mm Galvutės tipas: Automatinė Galvutės apsukos: 4.000 rpm Kūgis: ISO 50 DIN 2080 Variklio galia: 28 kW Nuolatinės variacijos greitis: 50➗ 4.000 Greičių diapazonas: 2 Greitasis pastūma: 10.000 mm/min Ppodpfx Ajyg R Abodzjt Staklių svoris: 15 t Elektroninis rankenėlė: Taip Darbo valandos: Įrenginys veikia: 22.924 h Valdymas įjungtas: 23.132 h Automatinis ciklas: 8.064 h

Būklė: naudotas, Gamybos metai: 2019, galia: 30 kW (40,79 AG), tūrio srautas: 4,95 m³/val, slėgis (maks.): 12,75 juosta, Oro kompresorius Atlas Copco AQ30VSD FF Gamintojas: Atlas Copco Modelis: AQ30VSD FF Pagaminimo metai: 2019 Pagaminimo vieta: Belgija Maksimalus slėgis: 12,75 bar Galia: 30 kW Tiekiamo oro kiekis: 4,95 m³/min Srauto tūris: 82,5 l/s, 174,8 cfm, 4,95 m³/min Variklio galia: 40 AG Pjdpfoxk U Arex Adzopt Variklio sūkių dažnis: 8600 aps./min. Svoris: 702 kg Maitinimas: 400 V, 50 Hz, 3 fazės Konstrukcija: Be alyvos ISO klasė: 8573-1 klasė 0 Valdymas: Elektronikon Graphic Įranga: SMARTLINK Kilmė: Pagaminta Belgijoje Už pateiktos informacijos tikslumą, išsamumą ir naujumą neatsakome.

Gamybos metai: 2024, būklė: naujas, Universal testing machine H 5 TMNI (L) – 250mm Extended Version Mechanical structure: according to DIN EN ISO 7500-1 and ASTM E4 2 backlash-free recirculating ball screws, brushless drive motor, Fmax = 5 kN, stiffness 9.4 kN/mm 1 test space up to rated load: Test space width: 420 mm Max. test stroke without test fixtures, adapters, and KMZ: 1270 mm Max. test space height (between lower fixed and movable crosshead) without test fixtures, adapters, and KMZ: 1325 mm Travel speeds: Testing speed 0.001 – 1200 mm/min up to rated load Return speed 1200 mm/min Force measurement: Measuring range depending on the used load cell: 0.4 – 100 % of rated load, class 1 (optionally class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Resolution of force measurement depending on integration time between: +/-160,000 and +/-900,000 digits. The machine is supplied with a factory test certificate. If customer requests a factory or DAkkS calibration at the installation site, these costs must be calculated separately. Pjdpfx Ajiq Hxvedzjpt Crosshead travel measurement: Incremental quadrature input with encoder monitoring, storage of the crosshead position Resolution of crosshead travel measurement: