Rex Plačios Obliavimo Staklės pirkti naudotą (53 887)

Būklė: labai geros būklės (naudotas), CATALOG NUMBER 7503 TECHNICAL DATA: - Max planing width: 610 mm - Max planing height (two-sided): 200 mm - Max planing height (four-sided): 100 mm Top side: - 2 rubber feed rollers - 2 toothed feed rollers - Metal feed roller - Toothed infeed drive shaft - Pawls - Pressure unit - 2 toothed drive shafts - Pressure unit - 610 mm planing shaft, 4-knife, 7.5 kW - Pressure unit - Smooth metal feed roller - Pressure unit - Profiling shaft, 7.5 kW - Pressure unit - Rubber feed roller Bottom side: - Planing shaft, spindle diameter 35 mm, shaft length 130 mm, 2.2 kW - 2 guide bars - Infeed table - Smooth drive shaft - 610 mm planing shaft, 4-knife (currently equipped with 2 knives), 7.5 kW - 2 smooth drive shafts - Split metal sliding roller - Side pressure Nodpfx Ajyz Sfbocpscr Rear side: - Side spindles with 2 pressure units - 1) Right vertical spindle 95 mm, 4 kW - 2) Left vertical spindle 95 mm, 4 kW - Spindle diameter: 35 mm - Spindles adjustable up/down, right/left - Adjustable rollers in the lower table - Electric thickness adjustment - 6 feed speeds: 7/9/11.5/14/18/23 m/min - Feed motor: 3.1 kW - Extraction ports diameters: 3×120 mm, 3×160 mm - Dimensions (L/W/H): 3150 x 1900 x 1600 mm - Weight approx. 3500 kg ADVANTAGES: – The best wide planer for wet and dry wood – Perfect for processing logs, flooring, etc. – Additional profiling shaft and planing shaft (scorer) – 4 horizontal planing shafts + 2 vertical spindles – Manufactured by German brand KUPFERMUHLE – Used planer, in very good condition Net price: 66,900 PLN Net price: 15,930 EUR (based on 4.2 EUR exchange rate) (Prices may vary with exchange rate fluctuations)

Būklė: labai geros būklės (naudotas), Catalogue number: 7641 TECHNICAL DATA - Max. planing width: 800 mm - Max. planing height: 200 mm - Top section: - Feed-in roller, geared - Pawls - Pressure shoe - 2 geared feed rollers - Pressure shoe - Planing shaft 800 mm, 4-knife, 7.5 kW - Pressure shoes - Profiling shaft 800 mm, 4-knife (currently mounted with 3 straight knives, 1 profile knife) - Pressure shoe - Smooth outfeed roller - Bottom section: - Guide rail - Infeed table - Smooth feed roller - Planing shaft 800 mm, 4-knife, 7.5 kW - 2 smooth feed rollers - Split smooth sliding roller - Side pressure at outfeed - Rear section: 2 lateral spindles + pressure shoes: 1) Right vertical 90 mm, 4 kW 2) Left vertical 90 mm, 4 kW - Spindle diameter: 35 mm - Spindles staggered - Spindles adjustable up/down, left/right 3) Additional lower horizontal spindle 350 mm, adjustable up/down + left/right, 5.5 kW Nsdoyqt Iuspfx Acpjcr - Spindle diameter: 40 mm - Outfeed: 4 upper metal sliding rollers, 2 lower rubber feed rollers - Adjustable rollers in the lower table - Electric height adjustment for planing - 6 feed speeds: 7 / 14 / 9 / 18 / 11.5 / 23 m/min - Feed motor: 2.2 kW - Extraction connection diameters: 3×180, 130 mm - Dimensions (L×W×H): 3100×2000×1900 mm - Weight: approx. 3500 kg ADVANTAGES – The best wide planing machine for wet and dry timber – Ideal for processing beams, floorboards, etc. – 3 planing shafts + 3 spindles – Manufactured by the German brand KUPFERMUHLE – Used planer, in very good condition Net price: 64,900 PLN Net price: 15,450 EUR (based on exchange rate 4.2 EUR) (Prices may vary with higher fluctuations)

Būklė: naudotas, Gamybos metai: 1996, Kaina: pagal užklausimą Dvipusis oblius REX HOMS 630 Serijos numeris: 16831 380 V, 102,6 A, 67,5 AG Įrengta su 3 obliavimo velenais 1. apatinis 15 kW 2. apatinis 11 kW 3. viršutinis daugiau nei 18,5 kW Maksimali obliavimo plotis: 630 mm Min.-maks. obliavimo aukštis: 10–310 mm Maks. drožlių pašalinimas viršutiniu velenu: 15 mm Maks. drožlių pašalinimas apatiniu velenu: 10 mm Ncsdpfx Aswng Ikscpor - Pagaminimo metai: 1996 - Dokumentacija prieinama: Ne - CE sertifikatas: Ne Finansinė informacija PVM: Nurodyta kaina be PVM PVM / Skirtumo apmokestinimas: PVM atskaitomas verslui Pristatymas ir keitimas galimi bet kuriuo metu dėl bet kokios pramoninės įrangos Yorick Diebels

Būklė: naudotas, Savaiminis svoris: 6 000 kg Matmenys (I x P x A): 340 x 210 x 190 cm Kaina: pagal užklausą - Dokumentacija prieinama: Ne - CE sertifikatas: Ne - Maks. darbinis plotis: 860 - Transportavimo matmenys: 3400 mm x 2100 mm x 1900 mm (i x p x a) - Transportavimo svoris [kg]: 6000 kg Njdpfx Ajxbf Iaocpjcr - Transportavimo pakuotės [vnt.]: 3 Finansinė informacija PVM: Nurodyta kaina be PVM PVM / Skirtumo apmokestinimas: PVM atskaitomas įmonėms Pristatymas ir keitimas galimi bet kuriuo metu visiems pramonės sektoriaus įrenginiams Yorick Diebels

Būklė: naudotas, Svoris be krovinio: 1.500 kg Matmenys (I x P x A): 150 x 140 x 150 cm Dvipusis obliavimo staklės MIC AM2 Nsdpownhhxjfx Acpjcr Maksimalus darbinis plotis: 510 mm Voleliai aukštyn ir žemyn 2 peiliai kiekvienai obliavimo galvai - Dokumentacija prieinama: Ne - CE sertifikatas: Ne - Serijos numeris: 1652.75 - Transportavimo matmenys: 1500 mm x 1400 mm x 1500 mm (i x p x a) - Transportavimo svoris [kg]: 1500 kg - Transporto paketų skaičius [vnt.]: 1 Finansinė informacija PVM: Nurodyta kaina be PVM PVM/skirtumo apmokestinimas: PVM atskaitomas įmonėms Pristatymas ir senos technikos priėmimas galimi bet kuriuo metu iš pramonės sektoriaus Yorick Diebels

Būklė: beveik kaip naujas (naudotas), Ketursienė obliavimo staklė REX HOMS-410 – Vokiška gamyba – Skirta šlapiam medienai TECHNINIAI PARAMETRAI: Maks. obliavimo plotis: 410 mm Dvipusio obliavimo aukštis: 200 mm Ketursienio obliavimo aukštis: 200 mm Veleno skersmuo: 40 mm Pagrindinių variklių galia: 2 x 11 kW Velenų variklių galia: 2 x 5,5 kW Padavimo greitis: tolygiai reguliuojamas Padavimo greitis reguliuojamas inverteriu Ncedsrwl Dbspfx Acper Trys viršutiniai traukimo velenai Trys apatiniai traukimo velenai Du pagalbiniai ritinėliai stalo paviršiuje Stabdys Minimalus ruošinio ilgis: 450 mm Įrenginio matmenys (ilgis/plotis/aukštis): 250 / 220 / 180 cm Svoris: ~ 3500 kg

Gamybos metai: 1980, būklė: labai geros būklės (naudotas), planing width 310 mm planing height 300 mm four-sided planing height 200 mm bottom head motor 15 kW top head motor 22 kW right head motor 7.5 kW left head motor 11 kW feed motor 7.5 kW electric height adjustment Njdpsiqflbefx Acpscr variable feed speed

Būklė: naujas, Gamybos metai: 2021, V-hold czterostronna strugarka pięciowrzecionowa, model VH-M 521 - szerokość obrabianego materiału od 20 do 210 mm - wysokość obrabianego materiału od 8 do 160 mm 1. wrzeciono od dołu – 7,5 kW 2. wrzeciono z prawej – 7,5 kW 3. wrzeciono z lewej – 7,5 kW 4. wrzeciono od góry – 11 kW 5. wrzeciono od dołu – 7,5 kW - posuw 5,5 kW, zakres od 6 do 36 m/min - obroty 6500 obr./min - średnica wrzecion 40 mm - posuw dla krótkich elementów, naprzeciwko wrzeciona prawego - docisk przed i za wrzecionem górnym - ręczna pompka do smarowania stołu Nsdpohq Rp Hsfx Acpjcr - masa maszyny 3100 kg Dostępna od ręki

Būklė: labai geros būklės (naudotas), Gamybos metai: 2016, Steton four-side planer with 5 heads. Steton four-side planer with 5 heads. The machine has been serviced and requires no additional investment. Technical data: - Maximum width of workpiece: 23 cm - Maximum height: 13 cm - Spindle diameter: 40 mm - 1 – Bottom horizontal: 23 cm - 2 – Right vertical: 13 cm - 3 – Left vertical: 13 cm - 4 – Top horizontal: 23 cm - 5 – Universal noise-insulated enclosure, 360 degrees - Electrically adjustable planing thickness Ncodpfei Apuhex Acpsr - Two feed speeds

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Kupfermühle KH 30 4-sided Planing Machine with additional unit - horizontal working spindle with outfeed unit 4-sided universal planer KUPFERMÜHLE Electrics: 400 Volt / 50 Hz ...../58.5 kW Original paint finish still Reseda Green RAL 6011 Motor power & arrangement in kW: bottom 7.5 / top 11.0 / vertical right 7.5 / vertical left 11.0 5th shaft bottom 11.0 / feed 7.5 / thicknessing 3.0 Feed speed min/max: 5 – 30 m/min Working spindles: 5 units Extraction/Connection diameters: bottom 200 / top 200 / right 160 / left 160 mm / bottom 140 mm Working width min/max: 30 mm / 310 mm Working height min/max (2-sided): 15 mm / 300 mm Working height min/max (4-sided): 15 mm / 180 mm (OPTION 250 or 300 mm possible) Key features: - Constant table height - Guide fence on the RIGHT - Interchangeable planer heads - Jointing device bottom and top - Table plates slotted for sound insulation and replaceable Nodpfox Ehfcjx Acpscr - Outfeed unit with 2 driven rollers on top and double-sided guide on top section - Height adjustment synchronized with base machine Machine in repaired and tested condition with functional guarantee. Further options: Repainting Paint refinishing General overhaul etc. etc.

Būklė: geras (naudotas), Gamybos metai: 1975, Funkcionalumas: visiškai funkcionalus, obliavimo plotis: 860 mm, obliavimo aukštis: 310 mm, darbinis plotis: 860 mm, darbinio aukščio: 750 mm, drožlių pašalinimas: 20 mm, sukimosi greitis (maks.): 4 200 aps./min, obliavimo peilių skaičius: 4, sunki storio obliavimo staklės, labai tinka statybinei medienai ir pan., pastovi stalo aukštis, stabilus ritininis konvejeris su pavara įvado zonoje, stabilus ritininis konvejeris be pavaros išvado zonoje Ncjdpoxfl A Ssfx Acpsr

Būklė: naujas, Gamybos metai: 2024, Martin Thickness Planer T 45 with XPLANE Cutterhead The T45 thickness planer provides ideal prerequisites for modern production: It delivers superbly planed surfaces, is quick and simple to operate, and also runs exceptionally quietly. The standard electronic control allows you to store up to 99 planing heights, making setting the planing height so easy that the first workpiece already fits perfectly. Of course, the thickness table can be adjusted with a simple push of a button or incrementally in 0.1 mm steps. The controls for feed adjustment are conveniently positioned within easy reach. The heavy, vibration-damping composite frame combined with the high-quality cutterhead bearings guarantee outstanding surface finishes. Thanks to its sound-absorbing design, quiet operation is standard even in the basic version. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Min. workpiece length: 270 mm • Speed: 5,000 rpm • Controls: Single-axis control for planing height, up to 99 values storable, 49 of which can be used for a freely programmable planing sequence; buttons for manual rapid and fine adjustment of thickness via digital display, pushbuttons for cutterhead start and stop, integrated operating hours counter • Cutterhead: Solid steel Xplane cutterhead Cutterhead with 3 spiral knife rows (33 convex carbide knives per row), supplied with full knife set and one T-key Torx T20; spindle speed 6,000 rpm included; The emission sound pressure level LpA during operation is reduced by 10 dB(A). • Thickness table: Electronic adjustment with fine setting, travel speed 10 mm/s, supported by 4 anti-tilt spindles, finely planed table surface • Infeed: 2 speeds, 6 / 12 m/min, electronically selectable even during planing; large rubber feed rollers Ø 85 mm for compensating variable timber thickness, gentle and self-cleaning rubber rollers, simple roller swap; sectional pressure bar at infeed • Extraction: Highly pivotable divided extraction hood with 160 mm chip extraction port, can be connected left/right (both sides possible in special cases); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil points; lubrication of bearings/cutterhead via nipples • Accessories: 1 grease gun filled with long-life grease Nsdjqlck Nspfx Acpjcr 1 oil gun 1 open-ended spanner 1 knife change tool 1 pair of dummy knives 640 mm 2 pairs TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at workstation LpA acc. to DIN EN ISO 11202 [dB(A)] No-load noise (no extraction) P1 65 No-load noise (with extraction) P1 77 Working noise (no extraction) P2 65 Working noise (with extraction) P2 78 Sound power level LWA acc. to DIN EN ISO 3746 [dB(A)] No-load noise (no extraction) 84 Working noise (with extraction) 90 Dust emission: Low-dust operation according to DGUV 209-044 / BGI 739-1 Location: ex-stock 54634 Bitburg - immediately available -

Būklė: naujas, Gamybos metai: 2024, Martin Thickness Planer T 45 with Tersa Cutter Block The T45 thickness planer offers ideal conditions for modern manufacturing: It produces smoothly planed surfaces, is quick and simple to operate, and also works exceptionally quietly. The standard electronic control with 99 programmable planing measurements makes setting the planing height so easy that your first workpiece will fit perfectly. The thickness table can be adjusted at the push of a button or incrementally in steps of 0.1 mm. All feed rate control elements are conveniently within reach. The heavy, vibration-dampening composite frame combined with the high-quality precision-mounted cutter block guarantees superior surface quality. Thanks to the sound-insulating construction, even the standard version operates at low noise levels. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Spindle speed: 5,000 rpm • Operation: 1-axis control for planing dimension, up to 99 values storable, 49 of which can be used for freely programmable planing sequences; buttons for manual rapid and fine adjustment of planing thickness with digital display, push button for cutter block start/stop, integrated operating hours counter • Cutter block: TERSA solid steel cutter block Z4 Ø 125 mm; includes lock for quick and easy knife change Nsdjqlckpopfx Acpocr • Thickness table: Electronic height adjustment with fine tuning, adjustment speed 10 mm/s, tip-proof supported on 4 lifting spindles, finely planed table surface • Feed: 2 speeds 6 / 12 m/min, can be selected electrically even during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, gentle and self-cleaning rubber rollers, quick roller change; segmented pressure bar at infeed • Extraction: Hinged, split hood with chip extraction port Ø 160 mm, can be connected left/right (both sides possible for special applications); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings/cutter block via grease nipples • Accessories: 1 grease gun with long-life grease 1 oil gun 1 open-end wrench 1 tool for knife changing 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Workplace emission sound pressure level LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission: Low-dust according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Būklė: naudotas, Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, obliavimo aukštis: 250 mm, darbinis plotis: 410 mm, bendras svoris: 5 500 kg, Obliavimo staklės REX TIMBERWORK 410x250 mm + 4x nuožulnūs kraštai + pjūklo velenas Pagaminimo metai: 1998 Nsdpewmm Alefx Acpscr Vieta: Prancūzija, Savojus

Būklė: naudotas, Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, bendras svoris: 10 000 kg, įėjimo įtampa: 380 V, Įranga: kabina, Lamelinė obliavimo staklė 310 x 200 mm + pjūklo velenas Nedpfxox Exbdj Acpscr

Būklė: geras (naudotas), Gamybos metai: 1996, Four-Sided Planer Weinig Unimat 23 – German-made – Serrated table – Year of manufacture: 1996 – Driven feed rollers in the table TECHNICAL SPECIFICATIONS: Planing width: 230 mm Planing height: 160 mm Serrated table Spindle diameter: 40 mm 1st bottom spindle: 7.5 kW 2nd right spindle: 7.5 kW 3rd left spindle: 7.5 kW 4th top spindle: 11 kW 5th bottom spindle: 7.5 kW Infinitely variable feed speed: 6–36 m/min Feed motor power: 5.5 kW Six upper steel feed rollers Two upper rubber feed rollers Three driven rollers in the table Nsdsh Dwl Dopfx Acpocr Pneumatic feed pressure Pneumatic pressure shoe Spindles with brakes Infeed table length: 1970 mm Electric height adjustment Centralized (split) lubrication Extraction port diameter: 140 mm Machine dimensions (L/W/H): 410 / 200 / 180 cm Weight: approx. 3000 kg

Būklė: geras (naudotas), Gamybos metai: 2002, Four-sided Planer Weinig Unimat 23 EL - Machine in stock - Made in Germany - Year of manufacture: 2002 - Technical documentation (DTR) TECHNICAL PARAMETERS: Njdohhyr Aopfx Acpscr - Planing width: 230 mm - Planing height: 170 mm - Feed speed adjustable via frequency inverter: 6–26 m/min - Spindle diameter: 40 mm 1st (bottom) spindle: 7.5 kW 2nd (right) spindle: 7.5 kW 3rd (left) spindle: 7.5 kW 4th (top) spindle: 7.5 kW 5th (bottom) spindle: 7.5 kW 6th (top) spindle: 7.5 kW - Feed motor power: 4 kW - Feed via cardan shafts - Pneumatic hold-down - Five steel upper feed rollers - Four rubber upper feed rollers - Electric height adjustment - Extraction port diameter: 140 mm - Centralized lubrication - Table length: 1980 mm Machine dimensions: - Length: 520 cm - Width: 210 cm - Height: 210 cm - Weight: 4000 kg The Weinig Unimat 23EL is a modern four-sided planer/moulder, a true workhorse for demanding operations. It is suitable for producing: mouldings, soffits, paneling, squared timber, and profiles. ADVANTAGES: - Extremely durable “armored” machine - Cost-effective in relation to its capabilities - Simple to maintain and repair - Ideal for continuous operation - Cast iron frame - Very stable - No vibrations - Stable material guidance - Capability to profile and plane in a single pass

Būklė: labai geros būklės (naudotas), Catalogue number: 7706 TECHNICAL DATA - Max. working width: 220 mm Nedpfsylazdox Acpocr - Max. working height: 120 mm - 5 spindles: 1) Bottom horizontal: 220 mm, 4 kW 2) Right vertical: 120 mm 3) Left vertical: 120 mm; spindles 2 and 3 - 7.5 kW 4) Top horizontal: 220 mm, 5.5 kW 5) Lower horizontal: 220 mm, 4 kW - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm - Pneumatic pressure rollers - Top infeed: 4 driven, toothed rollers (including 1 double roller) - Top outfeed: smooth rubber-coated driven roller - Bottom outfeed: rubber-coated driven roller - Feed movement via cardan shafts - Infinitely variable feed speed: 6–36 m/min - Feed motor: 2.2 kW - Lifting motor: 0.25 kW - With brake - Electric thickness adjustment - Centralised table lubrication - Infeed table length: 1970 mm - Extraction port diameter: 4x120 mm, 140 mm - Dimensions (LxWxH): 3450x1600x1450 mm - Weight: 1112 kg Net price: 39,900 PLN Net price: 9,500 EUR (based on the exchange rate of 4.2 EUR) (Prices may change depending on currency fluctuations)

Būklė: labai geros būklės (naudotas), KATALOGO NUMERIS 7618 TECHNINIAI DUOMENYS - veleno plotis 500 mm - peilių kiekis 4 vnt. - maksimali apdirbamo elemento storis 230 mm Iš viršaus: - atbulinio judėjimo stabdikliai - varomas, dantytas, pasukamas, sekvencinis įvadas velenas - prispaudėjai - obliavimo velenas - prispaudėjas - lygus varomas išvedimo velenas Iš apačios: - 2 slydimo ritinėliai stale - variklis 5,5 kW - rankinis stalo pakėlimas - 2 padavimo greičiai: 7,5; 13 m/min - nusiurbimo antgalio skersmuo 160 mm - matmenys ilgis/plotis/aukštis 1100x1000x1200 mm - svoris 600 kg Ncedpfjymnm Dox Acpsr PRIVALUMAI – pagaminta Italijoje – nenudažyta iš naujo – naudota storio obliavimo staklė, labai gera būklė Grynasis kaina: 15 900 PLN Grynasis kaina: 3 780 EUR priklausomai nuo kurso 4,2 PLN/EUR (Kainos gali keistis priklausomai nuo valiutų svyravimų)

Būklė: labai geros būklės (naudotas), Katalogo numeris 7832 TECHNINIAI DUOMENYS - Veleno plotis: 640 mm - Peilių kiekis: 4 vnt - Maksimali apdirbamo elemento storis: 300 mm - Skaitmeninis obliavimo storio ekranas – Iš viršaus: - Išmetimo įtaisai - Sekvencinis padavimo velenas - Obliavimo velenas - 2 lygūs, traukiantys, metaliniai išvedimo velenai – Iš apačios: - 2 reguliuojami volai apatiniame stale Ncsdpfxsyyyxgs Acpsr - Stalas su 4 varžtais - Variklis: 7,5 kW - Stabdys - Elektrinis stalo pakėlimas - 2 padavimo greičiai: 7/14 m/min - Padavimo variklis: 0,75/1,1 kW - Nusiurbimo antgalio skersmuo: 160 mm - Matmenys (ilgis/plotis/aukštis): 1540 x 1220 x 1230 mm - Svoris: 1300 kg PRIVALUMAI – Pagaminta Lenkijoje – Elektrinis stalo pakėlimas – Segmentinis padavimo velenas – Naudota storio obliavimo staklė, labai gera būklė Grynoji kaina: 32 900 PLN Grynoji kaina: 7 840 EUR, pagal kursą 4,2 EUR (Kainos gali keistis esant didesnėms kursų svyravimams)

Būklė: labai geros būklės (naudotas), Catalog number: 6368 TECHNICAL DATA - Maximum workpiece width: 230 mm - Maximum workpiece height: 130 mm 7 spindles: 1) Lower horizontal 230 mm, 5.5 kW 2) Right vertical 130 mm, 5.5 kW 3) Left vertical 130 mm, 5.5 kW 4) Upper horizontal 230 mm, 7.5 kW 5) Upper horizontal 230 mm, 11 kW 6) Lower horizontal 230 mm, 18.5 kW 7) Universal 230 mm, adjustable 360 degrees, 5.5 kW - All spindles adjustable up/down and left/right - All spindles equipped with electric brake - Spindle diameter: 40 mm - Spindles 4 and 5 adjustable electrically up/down - Top: 8 driven metal feed rollers, swiveling, including 2 double rollers - Top: 4 driven rubber outfeed rollers - Top: 2 pressure units - Bottom: pawls - Bottom side: 3 pressure units - Bottom: 2 smooth metal driven rollers - Bottom: 2 double driven rubber rollers - Feed rollers pneumatically pressed - Feed on Cardan shafts - Stepless feed speed adjustment: 5–36 m/min - Feed motor: 4 kW - Electric thickness adjustment: 0.75 kW - Infeed table length: 1980 mm - Fully enclosed machine compartment - Central table lubrication - Extraction port diameters: 5x120 mm, 2x150 mm - Dimensions (LxWxH): 5500x1840x1900 mm - Weight: approx. 5000 kg ADVANTAGES – Italian manufacture – Equipped with 7 heads – Suitable for wet and dry wood – Last spindle universal – Not repainted – Used planer, in very good condition Net price: 146,900 PLN Net price: 34,970 EUR (based on 4.2 EUR exchange rate) Ncsdeyy Iyfspfx Acpsr (Prices may vary depending on exchange rate fluctuations)

Būklė: labai geros būklės (naudotas), Katalogo numeris 7835 TECHNINIAI DUOMENYS - veleno plotis: 410 mm - triukšmą mažinantis šukas - peilių skaičius: 4 vnt. Nedpfxsyz Iybo Acpjcr - stalų ilgis: 2500 mm - ketaus stalai - abu stalai reguliuojami - originalus kampu reguliuojamas liniuotė - variklis: 4 kW - elektrinis stabdis - ištraukimo jungties skersmuo: 125 mm - matmenys (ilgis/plotis/aukštis): 2500x820x1210 mm - svoris: 910 kg PRIVALUMAI – pagaminta Lenkijoje – viršutinis valdymo pultas – 4 peilių velenas – naudota obliavimo staklė – labai gera būklė Grynoji kaina: 15 900 PLN Grynoji kaina: 3 790 EUR pagal 4,2 EUR kursą (Kainos gali keistis esant stipriems svyravimams)

Būklė: labai geros būklės (naudotas), Katalogo numeris 7739 TECHNINIAI DUOMENYS LYGINIMO STAKLĖS: - veleno plotis 410 mm - 3 peilių velenas - triukšmą mažinantis šukas - veleno apsauga - kampu reguliuojamas liniuotė - stalų ilgis 2060 mm - abu stalai reguliuojami STORIO OBLIUS: - maksimalus ruošinio storis 240 mm - storio obliaus veleno apsauga *iš viršaus: - stabdžiai - traukos velenas dantytas, lankstus - prispaudėjai - obliaus velenas - prispaudėjas - glotnus išleidimo velenas - apatinėje stalo dalyje 2 reguluojami volai - pagrindinis variklis 5,5 kW - elektrinis stabdis - elektrinis stalo pakėlimo/leidimo reguliavimas - ištraukimo jungties skersmuo 120 mm - matmenys ilgis/plotis/aukštis 2060x970x1150 mm - svoris 660 kg PRIVALUMAI – itališka gamyba – triukšmą mažinantis šukas – nenudažyta – idealios būklės – kombinuotos lyginimo-storio obliaus naudotos Nsdpsxbp Anofx Acpjcr Grynasis kaina: 22 900 PLN Grynasis kaina: 5 450 EUR, pagal kursą 4,2 EUR (Kainos gali keistis priklausomai nuo valiutų svyravimų)

Būklė: labai geros būklės (naudotas), CATALOG NUMBER: 6950 TECHNICAL DATA - Maximum workpiece width: 220 mm - Maximum workpiece height: 130 mm – 4 spindles: 1) Bottom horizontal, 220 mm, 5.5 kW 2) Right vertical, 130 mm 3) Left vertical, 130 mm; (spindles 2 and 3) 5.5 kW 4) Top horizontal, 220 mm, 5.5 kW - All 4 spindles electrically adjustable up/down - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm - 4 upper infeed feed rollers, geared, including 1 double roller - 1 upper outfeed double feed roller, rubber-coated - 1 lower outfeed feed roller, rubber-coated - Feed via Cardan shafts - Variable feed speed adjustment: 6–22 m/min - Feed motor: 2.2 kW - Lifting motor: 0.55 kW - Electric thickness adjustment - Infeed table length: 1970 mm - Central lubrication - Extraction port diameter: 3x120 mm, 140 mm - Enclosed in soundproof cabin - Dimensions (LxWxH): 3350 x 1400 x 1400 mm, weight: 1700 kg – Made in Germany – Unpainted Ncodpfx Acjy At Uaoper – Used planer/moulder, very good condition Net price: 33,900 PLN Net price: 8,070 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may be subject to change)

Būklė: labai geros būklės (naudotas), CATALOG NUMBER 7890 Technical specifications: - Track width: 245 mm - Arbor width for edger: 380 mm - Arbor width for multirip saw: 320 mm - Max. saw blade diameter: 350 mm - Saw blade bore diameter for edger: 80 mm - Saw blade bore diameter for multirip saw: 65 mm - Max. cutting height: 120 mm - Table width (with clearance): 900 mm - Table length: 1780 mm – Top section: - Kickback pawls/rejectors - Pressure roller, smooth - Kickback pawls - Pressure roller, smooth - Insert for short pieces - Shaft with saws Nedpfx Acoyitxdepecr - 2 pcs. smooth pressure rollers – Bottom section: - Guide - Kickback pawls/rejectors - Track - Central lubrication - Laser - Stepless feed speed adjustment - Feed motor: 1.1 kW - Main motor: 30 kW - Manual lifting of the main assembly - Manual lifting of the saw shaft - Extraction port diameter: 210 mm - Overall dimensions (L/W/H): 1900x1500x1800 mm - Weight approx.: 2000 kg ADVANTAGES – German manufacturing – Stepless feed speed control – Shaft with floating blade for edging – Sleeve for multirip saw included – Laser – Insert for short pieces – Used multirip saw, very good condition Net price: 55,900 PLN Net price: 13,300 EUR (calculated at 4.2 EUR/PLN) (Prices may vary depending on exchange rate fluctuations)